supplier

Introduction JIS G 3214 specifies stainless steel forgings intended for pressure vessels and their associated components. These forged stainless steel materials are designed to provide corrosion resistance, mechanical strength, heat resistance, and reliable performance in industrial pressure-containing applications. The standard covers different stainless steel grades, including austenitic, martensitic, and precipitation-hardening types. Common grades include SUSF304, SUSF304L, SUSF316, SUSF316L, SUSF321, SUSF347, SUSF410-A, SUSF630, and SUSF6NM. Grade selection depends on the operating environment, corrosion requirements, temperature, pressure, and mechanical properties required for the application. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of stainless steel products, including stainless steel forgings for industrial and pressure vessel applications. Products can be sourced on an order basis according to the required grade, dimensions, quantity, and applicable technical specifications. Available Grades SUSF304 | SUSF304H | SUSF304L | SUSF304LN | SUSF304N | SUSF310 | SUSF316 | SUSF316H | SUSF316L | SUSF316LN | SUSF316N | SUSF317 | SUSF317L | SUSF321 | SUSF321H | SUSF347 | SUSF347H | SUSF410-A | SUSF410-B | SUSF410-C | SUSF410-D | SUSF630 | SUSF6B | SUSF6NM Forms of Supply - Stainless steel forged rings - Stainless steel forged blocks - Stainless steel forged discs - Forged shafts and cylindrical components - Forged flanges and pressure vessel components - Custom-machined stainless steel forgings, subject to order requirements Availability of each form depends on the required dimensions, grade, and manufacturing specifications. Chemical Composition and Mechanical Properties Example grade: SUSF304 Chemical composition (maximum and range, %): - Carbon (C): 0.08% maximum - Silicon (Si): 1.00% maximum - Manganese (Mn): 2.00% maximum - Phosphorus (P): 0.040% maximum - Sulphur (S): 0.030% maximum - Nickel (Ni): 8.00–11.00% - Chromium (Cr): 18.00–20.00% Mechanical properties: - Minimum yield strength: 205 MPa - Tensile strength: 480 MPa minimum - Elongation: 29% minimum - Reduction of area: 45% minimum - Brinell hardness: 187 HB maximum The above values are indicative of SUSF304 requirements. Actual mechanical properties depend on the applicable test conditions, specimen dimensions, and standard edition. Final acceptance should be based on the applicable JIS G 3214 requirements and material test certificate. Key Features - Designed for pressure vessel and industrial equipment applications - Available in austenitic, martensitic, and precipitation-hardening stainless steel grades - Good corrosion resistance in suitable operating environments - Available in grades offering different mechanical strength and temperature resistance - Suitable for forged pressure-containing components - Heat-treatment options according to the applicable material grade - Custom dimensions and machining may be arranged according to order specifications Applications - Pressure vessels and pressure vessel components - Chemical processing equipment - Petrochemical and refinery equipment - Industrial heat exchangers - Stainless steel pressure vessel heads and closures - Pumps, valves, and forged fittings - Power generation equipment - Corrosion-resistant industrial machinery - High-temperature industrial equipment, where the selected grade is suitable Conclusion JIS G 3214 stainless steel forgings are used in pressure vessels and industrial equipment requiring corrosion resistance, mechanical strength, and reliability. Grade selection depends on operating conditions and technical requirements. To place an order or make an enquiry for JIS G 3214 stainless steel forgings, contact Ladhani Metal Corporation with your required grade, dimensions, heat-treatment condition, testing requirements, and quantity. #JISG3214 #JISG3214Steel #JISG3214Standard #JISG3214StainlessSteelForgings #StainlessSteelForgings #StainlessSteel #SteelForgings #StainlessSteelForgedComponents #ForgedSteel #IndustrialForgings #PressureVesselMaterials #PressureVesselForgings #StainlessSteelComponents #CorrosionResistantSteel #AlloySteel #EngineeringSteel #PrecisionForgings #CustomSteelForgings #SteelForgingManufacturer #SteelForgingSupplier #SteelForgingExporter #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #IndustrialMaterials #MechanicalEngineering #JapaneseSteelStandards #SteelProducts #SteelStockist #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

Introduction JIS G 3205 specifies carbon steel and alloy steel forgings designed for pressure vessels and their components operating at low temperatures. These forged steel materials are developed with consideration for weldability, mechanical strength, and impact toughness under low-temperature service conditions. The standard includes grades SFL1, SFL2, and SFL3, which are selected according to the required mechanical properties, chemical composition, and low-temperature impact performance. The appropriate grade depends on the equipment design, operating temperature, and purchaser’s technical requirements. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of carbon steel and alloy steel products, including forged materials for industrial and pressure vessel applications. Products can be sourced on an order basis according to the required grade, dimensions, quantity, and applicable technical specifications. Available Grades SFL1 | SFL2 | SFL3 Forms of Supply Forged rings Forged blocks Forged discs Forged shafts and cylindrical components Custom-machined forgings, subject to order requirements Availability of each form depends on the required dimensions, grade, and manufacturing specifications. Material Type JIS G 3205 covers carbon steel and alloy steel forgings for low-temperature pressure vessel service. SFL1 and SFL2 are carbon steel grades, while SFL3 is a nickel-alloyed steel grade intended for low-temperature applications. Chemical Composition and Mechanical Properties Example grade: SFL1 Chemical composition (maximum, %): Carbon (C): 0.30% Silicon (Si): 0.35% Manganese (Mn): 1.35% Phosphorus (P): 0.030% Sulphur (S): 0.030% Mechanical properties: Minimum yield strength: 225 MPa Tensile strength: 440–590 MPa Elongation: minimum 38% as reported for the applicable test specimen Impact toughness: tested according to the applicable low-temperature requirements of the standard Mechanical properties and impact requirements depend on the applicable test conditions and specification. The chemical and mechanical values above are indicative of SFL1; final acceptance should be based on the applicable standard edition, purchase specification, and material test certificate. Surface Finish Forgings are supplied with a finish appropriate to their manufacturing and inspection requirements. Depending on the order, supply may include as-forged surfaces or machined surfaces. Finished components must be free from harmful surface defects that could affect their intended use. Delivery Condition JIS G 3205 forgings undergo the heat-treatment requirements specified by the standard. Depending on the grade and agreed requirements, heat treatment may include normalizing, normalizing and tempering, or quenching and tempering. Inspection and testing requirements should be confirmed at the time of ordering. Key Features Designed for low-temperature pressure vessel applications Available in carbon steel and nickel-alloyed steel grades Suitable for forged pressure vessel components Mechanical strength and impact toughness assessed through specified testing Weldability considered in material requirements Custom dimensions and machining may be arranged according to order specifications Applications Low-temperature pressure vessels Pressure vessel heads and forged closures Industrial process equipment Cryogenic and low-temperature service equipment, where the selected grade is suitable for the design conditions Forged pressure-containing components Industrial equipment requiring verified low-temperature toughness Conclusion JIS G 3205 carbon steel and alloy steel forgings are intended for pressure vessels and associated components used in low-temperature service. Selecting the correct SFL grade requires consideration of operating temperature, impact requirements, dimensions, heat treatment, and applicable inspection criteria. To place an order or make an enquiry for JIS G 3205 forgings, contact Ladhani Metal Corporation with your required grade, dimensions, heat-treatment condition, testing requirements, and quantity. #JISG3205 #JISG3205Steel #JISG3205Standard #JISG3205SteelForgings #SteelForgings #CarbonSteelForgings #AlloySteelForgings #ForgedSteel #SteelForgingManufacturer #SteelForgingSupplier #SteelForgingExporter #IndustrialForgings #EngineeringSteel #CarbonSteel #AlloySteel #ForgedComponents #SteelComponents #HeavySteelForgings #PrecisionForgings #CustomSteelForgings #IndustrialMaterials #MechanicalEngineering #PressureVesselMaterials #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #JapaneseSteelStandards #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota

Introduction JIS G 3136 specifies hot-rolled steel products used for building structures. These products are designed to provide suitable strength, weldability, and structural reliability for buildings and earthquake-resistant structural frameworks. The standard covers requirements for chemical composition, mechanical properties, dimensional tolerances, testing, and inspection. JIS G 3136:2022 is the current edition and includes SN-grade steels developed for building structural members. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of structural steel plates and sheets for industrial and construction applications. Material can be supplied according to customer requirements, with mill test certificates and quality inspection as applicable. Available Grades SN400A | SN400B | SN400C | SN490B | SN490C Forms of Supply Hot-rolled steel plates Rolled steel sheets Structural steel plates for building construction Cut-to-size and cut-to-length plates Material supplied in specified thicknesses, widths, and lengths Material Type Carbon Steel (CS) | Mild Steel (MS) | Structural Steel | Weldable Building Steel Chemical Composition and Mechanical Properties Example Grade: SN490B Chemical Composition (typical specified limits by weight): Carbon (C): Maximum 0.18% for plates up to 50 mm thick Silicon (Si): Maximum 0.55% Manganese (Mn): Maximum 1.65% Phosphorus (P): Maximum 0.030% Sulfur (S): Maximum 0.015% Mechanical Properties: Yield Strength: Minimum 325 MPa for plates up to 16 mm thick Tensile Strength: 490–610 MPa Elongation: Depends on plate thickness and test specimen Impact Toughness: Charpy impact requirements apply to specified grades and test conditions Chemical composition and mechanical property limits vary by grade and thickness. Confirm the applicable JIS G 3136:2022 requirements and material test certificate before final selection. Surface Finish JIS G 3136 steel plates and sheets are generally supplied with a hot-rolled surface finish. Surface quality, dimensional tolerances, and permissible imperfections are controlled according to the applicable specification and purchase requirements. Delivery Condition Steel products are supplied in the condition permitted by the applicable standard and purchase order. Additional requirements for processing, testing, or inspection should be confirmed when placing the order. Key Features Suitable for building and structural fabrication Good weldability with appropriate welding procedures Controlled yield strength and tensile properties Designed for structural reliability and seismic-resistant building applications Available in different grades and dimensions Material inspection and mill test certificates according to order requirements Applications Commercial and residential building frames High-rise buildings Earthquake-resistant structural frameworks Steel columns and beams Industrial buildings and factories Structural supports and bracing Construction and infrastructure projects Conclusion JIS G 3136 rolled steel sheets and plates are used in building structures requiring controlled mechanical properties, weldability, and structural reliability. The correct grade should be selected according to design loads, seismic requirements, plate thickness, and applicable construction specifications. To place an order or make an enquiry for JIS G 3136 rolled steel sheets and plates, contact Ladhani Metal Corporation with your required grade, thickness, dimensions, delivery condition, and quantity. #JISG3136 #JISG3136Steel #JISG3136Standard #JISG3136StructuralSteel #JISG3136SteelPlates #JISG3136SteelSheets #StructuralSteel #CarbonSteel #RolledSteel #WeldableStructuralSteel #SteelPlates #SteelSheets #MildSteel #MSPlates #MSSheets #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #IndustrialSteel #EngineeringSteel #SteelProducts #JISStandards #JapaneseSteelStandards #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

Introduction JIS G 3128 specifies hot-rolled high yield strength steel plates with excellent weldability for bridges, pressure vessels, high-pressure equipment, and other welded structures. These plates are designed to provide high strength, toughness, and reliable performance in applications subjected to significant mechanical loads. The standard specifies requirements for chemical composition, mechanical properties, heat treatment, testing, and inspection. The current edition is JIS G 3128:2025, which covers steel plates with a nominal tensile strength class of 780 MPa and proof stress class of 685 MPa. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of high yield strength steel plates for industrial and structural applications. Material can be supplied according to customer requirements, with mill test certificates and quality inspection as applicable. Available Grades SHY685 | SHY685N | SHY685NS Forms of Supply Hot-rolled high yield strength steel plates Quenched and tempered steel plates Welded structural steel plates Cut-to-size and cut-to-length plates Plates supplied in required thicknesses, widths, and lengths Material Type High-Strength Alloy Steel | High Yield Strength Structural Steel | Weldable Steel Plates Chemical Composition and Mechanical Properties Example Grade: SHY685 Chemical Composition (maximum, by weight): Carbon (C): 0.18% Silicon (Si): 0.55% Manganese (Mn): 1.50% Phosphorus (P): 0.030% Sulfur (S): 0.025% Chromium (Cr): 1.20% Copper (Cu): 0.50% Molybdenum (Mo): 0.60% Vanadium (V): 0.10% Boron (B): 0.005% Mechanical Properties: Yield Strength / Proof Stress: Minimum 685 MPa for plates 6–50 mm thick Tensile Strength: 780–930 MPa for plates 6–50 mm thick Elongation: Depends on plate thickness and test specimen Charpy Impact Toughness: Specified impact energy requirements apply at the designated test temperature Heat Treatment: Quenching and tempering The values above are representative of SHY685 requirements in the 2021 edition. The applicable JIS G 3128:2025 requirements, plate thickness, heat treatment, and material test certificate should be checked before final material selection. Surface Finish JIS G 3128 steel plates are generally supplied with a hot-rolled surface finish. Surface quality, dimensional tolerances, and permissible imperfections are controlled according to the applicable specification and purchase requirements. Delivery Condition SHY685 plates are typically supplied in the quenched and tempered condition. The required delivery condition, testing, and inspection should be confirmed according to the applicable standard and purchase order. Key Features High yield strength for demanding structural applications Excellent weldability when suitable welding procedures are followed High tensile strength and load-bearing capacity Controlled chemical composition and mechanical properties Suitable for heavy-duty welded structures Inspection and mill test certificates according to order requirements Applications Bridge girders and bridge structures Pressure vessels and high-pressure equipment Heavy-duty welded structures Industrial machinery and supporting structures Infrastructure and engineering projects Load-bearing structural components Specialized industrial fabrication Conclusion JIS G 3128 high yield strength steel plates are used in welded structures requiring high strength, good weldability, and reliable mechanical performance. Grade selection should consider the applicable standard edition, plate thickness, design conditions, heat treatment, and impact testing requirements. To place an order or make an enquiry for JIS G 3128 high yield strength steel plates, contact Ladhani Metal Corporation with your required grade, thickness, dimensions, delivery condition, and quantity. #JISG3128 #JISG3128Steel #JISG3128SteelPlates #JISG3128Standard #JISG3128HighStrengthSteel #HighTensileSteelPlates #HighStrengthSteelPlates #WeldableSteel #StructuralSteelPlates #SteelPlates #AlloySteelPlates #CarbonSteelPlates #IndustrialSteel #EngineeringSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #SteelProducts #SpecialtySteel #HighTensileSteel #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar

Introduction JIS G 3126 specifies carbon steel plates used for pressure vessels operating at low temperatures. These plates are designed to provide suitable strength, toughness, and resistance to brittle fracture under specified service conditions. The standard covers requirements for chemical composition, mechanical properties, impact toughness, heat treatment, testing, and inspection. Grade selection depends on operating temperature, plate thickness, and design specifications. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of carbon steel plates for pressure vessel applications. Material can be supplied according to customer requirements, with mill test certificates and quality inspection as applicable. Available Grades SLA235A | SLA235B | SLA325A | SLA325B | SLA360 | SLA410 Forms of Supply Hot-rolled carbon steel plates Low-temperature pressure vessel plates Cut-to-size and cut-to-length plates Plates supplied in required thicknesses, widths, and lengths Material Type Carbon Steel (CS) | Pressure Vessel Steel | Low-Temperature Service Steel Chemical Composition and Mechanical Properties Example Grade: SLA235A Chemical Composition: Carbon (C): 0.15% maximum Silicon (Si): 0.30% maximum Manganese (Mn): 0.70–1.50% Phosphorus (P): 0.025% maximum Sulfur (S): 0.020% maximum Mechanical Properties: Yield Strength: Depends on plate thickness Tensile Strength: 400–510 MPa Elongation: Depends on specimen type and plate thickness Impact Toughness: Specified according to the required test temperature and applicable standard Exact chemical composition and mechanical property values should be verified against the applicable JIS G 3126 edition and material test certificate. Surface Finish JIS G 3126 carbon steel plates are generally supplied with a hot-rolled surface finish. Surface quality, dimensional tolerances, and permissible imperfections are controlled according to the applicable specification and purchase requirements. Delivery Condition Plates may be supplied in normalized, thermo-mechanically controlled processed, or quenched and tempered conditions, depending on the grade and applicable requirements. Key Features Suitable for low-temperature pressure vessel applications Designed for specified strength and impact toughness Controlled chemical composition and mechanical properties Available in different grades and plate thicknesses Suitable for pressure vessel fabrication using appropriate welding procedures Material inspection and mill test certificates according to order requirements Applications Low-temperature pressure vessels Liquefied gas storage and processing equipment Industrial tanks designed for low-temperature service Chemical and petrochemical processing plants Refrigeration and gas-processing equipment Pressure-containing equipment operating in cold environments Industrial process vessels and fabricated structures Conclusion JIS G 3126 carbon steel plates are used in pressure vessels and industrial equipment requiring suitable strength and toughness at low temperatures. Grade selection should be based on operating temperature, design conditions, plate thickness, impact testing requirements, and delivery condition. To place an order or make an enquiry for JIS G 3126 carbon steel plates, contact Ladhani Metal Corporation with your required grade, thickness, dimensions, delivery condition, and quantity #JISG3126 #JISG3126Steel #JISG3126SteelPlates #JISG3126Standard #JISG3126CarbonSteel #CarbonSteelPlates #PressureVesselSteel #PressureVesselPlates #SteelPlates #BoilerSteelPlates #CarbonSteel #PressureSteelPlates #IndustrialSteel #EngineeringSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #SteelProducts #HighStrengthSteel #IndustrialMaterials #JISStandards #JapaneseSteelStandards #QualitySteel #MetalSupplier #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati

Introduction JIS G 3124 specifies high-strength hot-rolled steel plates used for boilers and pressure vessels operating at intermediate and moderate temperatures. These plates are designed to provide high strength, suitable toughness, and reliable performance under specified pressure and temperature conditions. The standard specifies requirements for chemical composition, mechanical properties, manufacturing, testing, inspection, and dimensions. JIS G 3124:2022 is the current edition. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of high-strength steel plates for pressure vessel and industrial applications. Material can be supplied according to customer requirements, with mill test certificates and quality inspection as applicable. Available Grades SEV245 | SEV295 | SEV345 Forms of Supply Hot-rolled high-strength steel plates Boiler and pressure vessel plates Cut-to-size and cut-to-length plates Plates in specified thicknesses, widths, and lengths Material Type High-Strength Steel (HSS) | Carbon-Manganese Steel | Pressure Vessel Steel Chemical Composition The chemical composition of JIS G 3124 steel plates depends on the grade and applicable requirements. The standard controls carbon, silicon, manganese, phosphorus, sulfur, and specified alloying elements. Example Grade: SEV245 Carbon (C): As per standard requirements Silicon (Si): As per standard requirements Manganese (Mn): As per standard requirements Phosphorus (P): As per standard requirements Sulfur (S): As per standard requirements Alloying elements: As specified for the grade Mechanical Properties JIS G 3124 plates are classified according to their specified proof stress at elevated temperature. The grade designation corresponds approximately to the lower limit of proof stress at 350°C for plates up to 100 mm thick. SEV245: Minimum specified proof stress class of 245 MPa at 350°C SEV295: Minimum specified proof stress class of 295 MPa at 350°C SEV345: Minimum specified proof stress class of 345 MPa at 350°C Tensile strength, room-temperature yield properties, elongation, and other requirements vary according to grade and plate thickness and should be confirmed against the applicable standard. Surface Finish JIS G 3124 steel plates are generally supplied with a hot-rolled surface finish. Surface condition, dimensions, tolerances, and permissible imperfections are subject to the applicable standard and purchase requirements. Delivery Condition The delivery condition depends on the grade, thickness, manufacturing process, and specified requirements. Plates are supplied in the condition permitted by the applicable standard, with any required heat treatment and testing confirmed according to the order. Key Features High strength for pressure vessel applications Specified elevated-temperature proof stress requirements Controlled chemical composition and mechanical properties Suitable for boiler and pressure vessel fabrication Available in different plate thicknesses and dimensions Inspection and material documentation according to order requirements Applications Industrial boilers and boiler components Pressure vessels and process vessels Heat exchangers and pressure-containing equipment Chemical and petrochemical processing plants Power generation equipment Industrial pressure systems Heavy-duty fabricated pressure structures Conclusion JIS G 3124 high-strength steel plates are used in boilers and pressure vessels designed for intermediate and moderate temperature service. The appropriate grade should be selected according to design conditions, operating temperature, plate thickness, and applicable engineering requirements. To place an order or make an enquiry for JIS G 3124 high-strength steel plates, contact Ladhani Metal Corporation with your required grade, thickness, dimensions, delivery condition, and quantity. #JISG3124 #JISG3124Steel #JISG3124SteelPlates #JISG3124Standard #JISG3124AlloySteel #HighStrengthSteel #HighStrengthSteelPlates #AlloySteelPlates #SteelPlates #CarbonSteelPlates #PressureVesselSteel #StructuralSteel #IndustrialSteel #EngineeringSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #SteelProducts #SpecialtySteel #QualitySteel #JISStandards #JapaneseSteelStandards #IndustrialMaterials #MetalSupplier #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur

Introduction JIS G 3120 specifies quenched and tempered manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for nuclear reactors and other pressure vessels. These plates are designed for applications requiring high strength, toughness, and reliable performance under demanding pressure and temperature conditions. The standard specifies requirements for chemical composition, mechanical properties, heat treatment, dimensions, testing, and inspection. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of alloy steel plates for pressure vessel and industrial applications. Material can be supplied according to customer requirements, with mill test certificates and quality inspection as applicable. Available Grades SQV1A | SQV1B | SQV2A | SQV2B | SQV3A | SQV3B Material Type Alloy Steel (AS) | Manganese-Molybdenum Steel | Manganese-Molybdenum-Nickel Steel | Pressure Vessel Steel Surface Finish JIS G 3120 plates are supplied with a hot-rolled surface finish and are subjected to applicable requirements for appearance, dimensions, and permissible surface imperfections. Delivery Condition Plates are generally supplied in the quenched and tempered condition. Other specified heat-treatment arrangements, including stress-relieving requirements, depend on the applicable standard provisions and purchaser agreement. Key Features High strength and toughness Controlled alloy composition Quenched and tempered delivery condition Suitable for demanding pressure vessel applications Specified impact testing and mechanical property requirements Inspection documentation available according to order requirements Applications Nuclear reactor pressure vessels Industrial pressure vessels High-pressure process equipment Chemical and petrochemical plants Power generation equipment Heavy-duty pressure-containing structures Industrial equipment requiring specified strength and toughness Conclusion JIS G 3120 alloy steel plates are used in nuclear reactors and other pressure vessels where strength, toughness, and controlled heat treatment are essential. Grade selection should be based on the design code, operating conditions, plate thickness, and applicable material requirements. To place an order or make an enquiry for JIS G 3120 alloy steel plates, contact Ladhani Metal Corporation with your required grade, thickness, dimensions, delivery condition, and quantity. #JISG3120 #JISG3120Steel #JISG3120SteelPlates #JISG3120Standard #SteelPlates #SteelPlateSupplier #SteelPlateManufacturer #SteelPlateExporter #CarbonSteel #AlloySteel #IndustrialSteel #EngineeringSteel #PressureVesselSteel #StructuralSteel #SteelProducts #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #MetalSupplier #MetalExporter #IndustrialMaterials #SpecialtySteel #HighStrengthSteel #JISStandards #JapaneseSteelStandards #SteelIndustry #QualitySteel #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh

Introduction JIS G 3118 specifies hot-rolled carbon steel plates used mainly for pressure vessels operating at intermediate and moderate temperatures. These plates are designed to meet specified requirements for strength, weldability, chemical composition, and mechanical properties. JIS G 3118:2024 is the current edition of this standard. The plates are used in pressure-containing equipment where material quality and compliance with the specified operating conditions are essential. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of carbon steel plates for industrial and pressure vessel applications. Material can be supplied according to required grades, dimensions, and delivery conditions, with mill test certificates and quality inspection as applicable. Available Grades SGV410 | SGV450 | SGV480 Forms of Supply Hot-rolled carbon steel plates Pressure vessel steel plates Cut-to-size plates Plates supplied in required thicknesses, widths, and lengths Material Type Carbon Steel (CS) | Pressure Vessel Steel | Hot-Rolled Steel Plates Chemical Composition The chemical composition of JIS G 3118 plates depends on the grade and applicable thickness. The standard specifies limits for carbon, silicon, manganese, phosphorus, and sulfur, along with other requirements where applicable. Example Grade: SGV410 Carbon (C): As per standard requirements Silicon (Si): As per standard requirements Manganese (Mn): As per standard requirements Phosphorus (P): As per standard requirements Sulfur (S): As per standard requirements Mechanical Properties The mechanical properties of JIS G 3118 plates include tensile strength, yield point or proof stress, and elongation. Required values depend on the grade and plate thickness. SGV410: Nominal tensile strength class of 410 MPa SGV450: Nominal tensile strength class of 450 MPa SGV480: Nominal tensile strength class of 480 MPa Final mechanical property requirements must be confirmed against the applicable standard and material test certificate. Surface Finish JIS G 3118 carbon steel plates are generally supplied with a hot-rolled surface finish. Surface quality and permissible imperfections are subject to the applicable standard and purchase requirements. Delivery Condition Plates are supplied in the delivery and heat-treatment condition specified for the selected grade, thickness, and order requirements. Any required heat treatment or additional testing should be confirmed when placing the order. Key Features Suitable for specified pressure vessel applications Controlled chemical composition and mechanical properties Suitable for welding and fabrication using appropriate procedures Available in different grades and plate dimensions Material documentation and inspection according to order requirements Applications Pressure vessels and process vessels Industrial storage tanks Chemical and petrochemical processing equipment Pressure-containing equipment for moderate-temperature service Industrial plant and process equipment Power generation equipment where the selected grade is suitable Heavy-duty fabricated pressure structures Conclusion JIS G 3118 carbon steel plates are used in pressure vessel manufacturing and industrial equipment that require specified strength, weldability, and material quality. To place an order or make an enquiry for JIS G 3118 carbon steel plates, contact Ladhani Metal Corporation with your required grade, thickness, dimensions, delivery condition, and quantity. #JISG3118 #JISG3118Steel #JISG3118SteelPlates #JISG3118Standard #JISG3118CarbonSteel #CarbonSteelPlates #PressureVesselSteel #PressureVesselPlates #SteelPlates #BoilerSteelPlates #CarbonSteel #PressureSteelPlates #IndustrialSteel #EngineeringSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #SteelProducts #PressurePurposeSteel #IndustrialMaterials #JISStandards #JapaneseSteelStandards #HighQualitySteel #MetalSupplier #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi

Introduction JIS G 3115 specifies hot-rolled steel plates with improved weldability for pressure vessels and high-pressure equipment used under intermediate-temperature service conditions. These steel plates are designed to provide suitable strength, weldability and reliability for pressure-containing applications. JIS G 3115 steel plates are used in industrial equipment, pressure vessels, storage tanks and other fabricated structures requiring dependable performance under pressure and intermediate-temperature conditions. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of JIS G 3115 steel plates, supplying the required grades, dimensions, thicknesses, surface finishes and delivery conditions as per customer requirements. Available Grades SPV235 | SPV315 | SPV355 | SPV410 | SPV450 | SPV490 Forms of Supply Steel Plates | Hot-Rolled Plates | Pressure Vessel Plates | Cut-to-Length Plates Material Type Carbon Steel | Pressure Vessel Steel | Weldable Structural Steel Chemical Composition SPV235: C 0.18% max. | Si 0.35% max. | Mn 1.40% max. | P 0.020% max. | S 0.020% max. Mechanical Properties SPV235: Tensile strength 400–510 MPa SPV315: Tensile strength 490–610 MPa SPV355: Tensile strength 520–640 MPa SPV410: Tensile strength 550–670 MPa SPV450: Tensile strength 570–720 MPa SPV490: Tensile strength 610–740 MPa Surface Finish Hot Rolled | Mill Finish | Descaled | Cut Edge | Mill Edge Delivery Condition As Rolled | Normalized | Thermomechanically Controlled Process | Quenched and Tempered, as applicable to grade and thickness Key Features • Improved weldability • Suitable for pressure-containing equipment • Reliable mechanical strength • Suitable for intermediate-temperature service • Available in different grades and thicknesses • Suitable for industrial fabrication • Supplied with mill test certificates and inspection documentation Applications • Pressure vessels • Industrial storage tanks • High-pressure equipment • Chemical processing equipment • Petrochemical installations • Industrial boilers and associated equipment, where specified • Process vessels and pressure-containing structures • Heavy industrial fabrication • Engineering equipment operating under pressure Conclusion JIS G 3115 steel plates provide suitable strength and weldability for pressure vessels and high-pressure equipment used under specified intermediate-temperature conditions. Ladhani Metal Corporation can supply these materials according to the required grade, thickness, width, length, delivery condition and quantity. To place an order or make an enquiry for JIS G 3115 steel plates, contact Ladhani Metal Corporation. #JISG3115 #JISG3115Steel #JISG3115SteelPlates #JISG3115Standard #JISG3115PressureVesselSteel #PressureVesselSteel #PressureVesselPlates #SteelPlates #CarbonSteelPlates #BoilerSteelPlates #PressureSteelPlates #IntermediateTemperatureSteel #IndustrialSteel #EngineeringSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #CarbonSteel #PressurePurposeSteel #SteelProducts #JISStandards #JapaneseSteelStandards #IndustrialMaterials #MetalSupplier #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur

Introduction JIS G 3114 specifies hot-rolled atmospheric corrosion resisting steel sheets and plates for welded structures. These weathering steels are designed to provide good strength, weldability and resistance to atmospheric corrosion, making them suitable for outdoor structural applications. JIS G 3114 steel sheets and plates are widely used for bridges, buildings, railway structures, infrastructure projects and other welded structures exposed to atmospheric conditions. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of JIS G 3114 steel sheets and plates, supplying the required grades, dimensions, thicknesses, surface finishes and delivery conditions as per customer requirements. Available Grades SMA400AP | SMA400AW | SMA400BP | SMA400BW | SMA400CP | SMA400CW | SMA490AP | SMA490AW | SMA490BP | SMA490BW | SMA490CP | SMA490CW | SMA570P | SMA570W Forms of Supply Steel Sheets | Steel Plates | Hot Rolled Sheets | Hot Rolled Plates | Steel Strips | Cut-to-Length Plates Material Type Weathering Steel | Atmospheric Corrosion Resisting Steel | Welded Structural Steel Chemical Composition SMA400AW: C 0.18% max. | Si 0.15–0.65% | Mn 1.25% max. | P 0.035% max. | S 0.035% max. | Cu 0.30–0.50% | Cr 0.45–0.75% | Ni 0.05–0.30% Mechanical Properties SMA400: Tensile strength 400–540 MPa SMA490: Tensile strength 490–610 MPa SMA570: Tensile strength 570 MPa class Surface Finish Hot Rolled | Mill Finish | Descaled | Pickled | Oiled | Cut Edge | Mill Edge Delivery Condition As Rolled | Normalized | Tempered | Quenched and Tempered | Thermomechanically Controlled Process | Cut-to-Length Key Features • Excellent atmospheric corrosion resistance • Good structural strength • Good weldability • Formation of a protective weathering layer • Suitable for outdoor structural applications • Reduced maintenance requirements in suitable environments • Available in different grades and thicknesses • Suitable for welded structural fabrication Applications • Bridges and bridge structures • Building and architectural structures • Railway structures • Outdoor structural frameworks • Industrial structures • Steel towers and supports • Infrastructure projects • Storage and transportation structures • Welded structural components • Heavy fabrication • General outdoor engineering applications Conclusion JIS G 3114 SMA400, SMA490 and SMA570 steel sheets and plates provide reliable weathering steel solutions for welded structures requiring strength, weldability and atmospheric corrosion resistance. To place an order or make an enquiry for JIS G 3114 steel sheets and plates, contact Ladhani Metal Corporation for your required grade, thickness, width, length, surface finish, delivery condition and quantity. #JISG3114 #JISG3114Steel #JISG3114SteelSheets #JISG3114SteelPlates #JISG3114Standard #JISG3114CortenSteel #WeatheringSteel #WeatheringSteelPlates #AtmosphericCorrosionResistantSteel #CorrosionResistantSteel #HotRolledSteel #HotRolledSteelSheets #HotRolledSteelPlates #WeldableSteel #StructuralSteel #SteelSheets #SteelPlates #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #IndustrialSteel #EngineeringSteel #JISStandards #JapaneseSteelStandards #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur

Introduction JIS G 3106 specifies rolled steels for welded structures and covers steel plates, sheets, strips, sections and flats used for welded structural applications. The standard includes grades designed to provide suitable strength, weldability and toughness for demanding structural applications. JIS G 3106 rolled steel sheets are widely used for bridges, ships, railway structures, storage tanks, containers, construction equipment and general welded structures. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of JIS G 3106 rolled steel sheets, supplying the required grades, dimensions, thicknesses, surface finishes and delivery conditions as per customer requirements. Available Grades SM400A | SM400B | SM400C | SM490A | SM490B | SM490C | SM490YA | SM490YB | SM520B | SM520C | SM570 Forms of Supply Rolled steel sheets | Hot rolled sheets | Steel plates | Steel strips | Cut-to-length sheets | Structural sections | Flats Material Type Welded Structural Steel | Carbon Steel | Hot-Rolled Structural Steel Chemical Composition SM490B: C 0.18% max. | Si 0.55% max. | Mn 1.65% max. | P 0.035% max. | S 0.035% max. Mechanical Properties SM400A/B/C: Tensile strength 400–510 MPa SM490A/B/C: Tensile strength 490–610 MPa SM490YA/YB: Tensile strength 490–610 MPa SM520B/C: Tensile strength 520–640 MPa SM570: Tensile strength 570–720 MPa Surface Finish Hot Rolled | Mill Finish | Descaled | Pickled | Oiled | Cut Edge | Mill Edge Delivery Condition As Rolled | Normalized | Controlled Delivery | Cut-to-Length | Heat Treated as Required Key Features • Excellent weldability • Good structural strength • Suitable for welded structural fabrication • Good toughness and impact resistance • Available in different grades and thicknesses • Suitable for heavy structural applications • Supplied with mill test certificates and inspection documentation Applications • Bridges and bridge structures • Shipbuilding and marine structures • Railway and rolling stock structures • Petroleum storage tanks • Industrial containers • Structural frames and supports • Heavy fabrication • Construction and engineering structures • Welded machinery and equipment • General welded structural applications Conclusion JIS G 3106 SM400, SM490, SM520 and SM570 rolled steel sheets provide reliable welded structural steel solutions for demanding fabrication and engineering applications. Ladhani Metal Corporation can supply these materials according to the required grade, thickness, width, length, surface finish, delivery condition and quantity. To place an order or make an enquiry for JIS G 3106 rolled steel sheets, contact Ladhani Metal Corporation. #JISG3106 #JISG3106Steel #JISG3106RolledSteel #JISG3106Standard #JISG3106Sheets #RolledSteelSheets #StructuralSteel #WeldableSteel #SteelSheets #SteelPlates #CarbonSteel #StructuralSteelPlates #MildSteel #MSSheets #MSPlates #SteelSheetManufacturer #SteelSheetSupplier #SteelSheetExporter #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #IndustrialSteel #EngineeringSteel #SteelProducts #JISStandards #JapaneseSteelStandards #IndustrialMaterials #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli

Introduction JIS G 3103 specifies hot-rolled steel plates of carbon steel and molybdenum alloy steel for boilers and pressure vessels. The standard covers five grades: SB410, SB450, SB480, SB450M and SB480M. JIS G 3103 steel plates are designed for boiler, pressure vessel and high-temperature service applications, offering suitable strength and performance under elevated-temperature conditions. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of JIS G 3103 steel plates, supplying the required grades, thicknesses, dimensions, surface finishes and delivery conditions as per customer requirements. Available Grades SB410 | SB450 | SB480 | SB450M | SB480M Forms of Supply Steel Plates | Hot Rolled Plates | Boiler Plates | Pressure Vessel Plates | Cut-to-Length Plates Material Type Carbon Steel | Molybdenum Alloy Steel | Boiler & Pressure Vessel Steel Chemical Composition SB480: C 0.40% max. | Si 0.30% max. | Mn 1.30% max. | P 0.030% max. | S 0.030% max. | Mo 0.12% max. Mechanical Properties SB410: Yield strength 225 MPa min. | Tensile strength 410–550 MPa SB450: Yield strength 245 MPa min. | Tensile strength 450–590 MPa SB480: Yield strength 265 MPa min. | Tensile strength 480–620 MPa SB450M: Yield strength 255 MPa min. | Tensile strength 450–590 MPa SB480M: Yield strength 275 MPa min. | Tensile strength 480–620 MPa Surface Finish Hot Rolled | Mill Finish | Descaled | Pickled | Oiled | Cut Edge | Mill Edge Delivery Condition As Rolled | Normalized | Stress Relief Annealed | Heat Treated as Required | Cut-to-Length Key Features • Suitable for boilers and pressure vessels • Available in carbon steel and molybdenum alloy steel grades • Good strength for pressure-containing applications • Suitable for elevated-temperature service • Good weldability and fabrication characteristics • Available in different thicknesses and dimensions • Supplied with required inspection and mill test certificates Applications • Boilers and boiler components • Pressure vessels • Steam drums • Heat exchangers • Industrial heating equipment • Power generation equipment • High-temperature process equipment • Chemical processing equipment • Petrochemical equipment • Fabricated pressure-containing structures Conclusion JIS G 3103 SB410, SB450, SB480, SB450M and SB480M steel plates provide reliable carbon steel and molybdenum alloy steel solutions for boiler and pressure vessel applications. To place an order or make an enquiry for JIS G 3103 steel plates, contact Ladhani Metal Corporation for your required grade, thickness, width, length, surface finish, delivery condition and quantity.

Introduction JIS G 3101 specifies rolled steels for general structure and covers mild steel / carbon steel grades used for general structural applications. The standard includes SS330, SS400, SS490 and SS540 grades with specified strength, elongation and bendability requirements. JIS G 3101 rolled steel sheets are widely used for construction, structural fabrication, civil engineering, machinery and general engineering applications. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of JIS G 3101 rolled steel sheets, supplying the required grades, dimensions, thicknesses, surface finishes and delivery conditions as per customer requirements. Available Grades SS330 | SS400 | SS490 | SS540 Forms of Supply Rolled steel sheets | Hot rolled sheets | Steel plates | Steel strips | Cut-to-length sheets | Flats | Sections Material Type Mild Steel (MS) | Carbon Steel (CS) | General Structural Steel Chemical Composition SS330: P 0.050% max. | S 0.050% max. SS400: P 0.050% max. | S 0.050% max. SS490: P 0.050% max. | S 0.050% max. SS540: C 0.30% max. | Mn 1.60% max. | P 0.040% max. | S 0.040% maX Mechanical Properties SS330: Yield strength 205 MPa min. | Tensile strength 330–430 MPa SS400: Yield strength 245 MPa min. | Tensile strength 400–510 MPa SS490: Yield strength 285 MPa min. | Tensile strength 490–610 MPa SS540: Yield strength 400 MPa min. | Tensile strength 540 MPa min. Surface Finish Hot rolled | Mill finish | Descaled | Pickled | Oiled | Cut-edge | Mill-edge Delivery Condition As rolled | Cut-to-length | Straightened | Customized delivery condition as per requirements Key Features • Good structural strength • Suitable for general fabrication • Good formability and bendability • Suitable for welding and fabrication depending on grade and thickness • Available in different thicknesses and dimensions • Suitable for general engineering requirements • Supplied with required inspection and mill test documentation Applications • Construction and structural fabrication • Civil engineering projects • Bridges and structural components • Building frames and supports • Foundation bolts and structural fasteners • Industrial machinery and equipment • Platforms, brackets and supports • General machine parts • Transportation and fabricated steel structures • General engineering applications Conclusion JIS G 3101 SS330, SS400, SS490 and SS540 rolled steel sheets provide reliable mild steel / carbon steel solutions for general structural applications. Ladhani Metal Corporation can supply these materials according to the required grade, thickness, width, length, surface finish and quantity. To place an order or make an enquiry for JIS G 3101 rolled steel sheets, contact Ladhani Metal Corporation. #JISG3101 #JISG3101Steel #JISG3101Standard #JISG3101Plates #JISG3101Bars #JISG3101StructuralSteel #StructuralSteel #RolledSteel #MildSteel #CarbonSteel #MSPlates #MSBars #SteelPlates #SteelBars #StructuralSteelPlates #StructuralSteelBars #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #IndustrialSteel #EngineeringSteel #CarbonSteelProducts #MildSteelProducts #SteelProducts #JISStandards #JapaneseSteelStandards #IndustrialMaterials #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ISO 9330-5:2000 specifies technical delivery conditions for submerged arc-welded (SAW) circular steel tubes made from unalloyed and alloyed steels with specified low-temperature properties. These tubes are intended for pressure purposes where the material is also used in low-temperature piping systems. ISO confirms ISO 9330-5:2000 as the current published edition; it was last reviewed and confirmed in 2012 and is currently under review. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of ISO 9330-5 Welded Steel Tubes, supplied in required grades, outside diameters, wall thicknesses, lengths, and delivery conditions. Products can be supplied with mill test certificates and strict quality inspection as per international standards. Available Grades PL 21 | PL 23 | PL 25 | PL 26 | 11MnNi5-3 | 13MnNi6-3 | 12Ni14 | X12Ni5 | X10Ni9 Forms of Supply • Submerged Arc Welded Tubes | SAW Steel Tubes | Longitudinally Welded Tubes | Helically Welded Tubes | Pressure Tubes | Low-Temperature Tubes | Circular Steel Tubes | Hot-Finished Tubes | Cold-Finished Tubes | Cut-to-Length Tubes Steel Types • Unalloyed Low-Temperature Steel | PL 21 | PL 23 | PL 25 | PL 26 • Manganese-Nickel Alloy Steel | 11MnNi5-3 | 13MnNi6-3 • Nickel Alloy Steel | 12Ni14 | X12Ni5 | X10Ni9 Chemical Composition – Example Grade X10Ni9 • Carbon (C): Max. 0.13% • Silicon (Si): Max. 0.35% • Manganese (Mn): 0.30–0.80% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.020% • Aluminium (Al): Min. 0.020% • Nickel (Ni): 8.50–9.50% • Molybdenum (Mo): Max. 0.10% • Vanadium (V): Max. 0.05% The standard specifies fully killed steels and controlled chemical composition for the listed grades. Mechanical Properties • PL 21: Tensile strength 360–480 MPa | Yield strength min. 215 MPa • PL 23: Tensile strength 410–530 MPa | Yield strength min. 235 MPa • PL 25: Tensile strength 360–490 MPa | Yield strength min. 255 MPa • PL 26: Tensile strength 480–580 MPa | Yield strength min. 265 MPa • 11MnNi5-3: Tensile strength 410–530 MPa | Yield strength min. 285 MPa • 13MnNi6-3: Tensile strength 490–610 MPa | Yield strength min. 355 MPa • 12Ni14: Tensile strength 440–590 MPa | Yield strength min. 245 MPa • X12Ni5: Tensile strength 510–710 MPa | Yield strength min. 390 MPa • X10Ni9: Tensile strength 690–840 MPa | Yield strength min. 510 MPa Low-Temperature Properties The grades are specified with Charpy V-notch impact requirements at low temperatures. X10Ni9, for example, is intended for particularly demanding low-temperature service, while the other grades have specified impact requirements according to grade and test temperature. Key Features • Submerged arc welded construction • Suitable for pressure applications • Excellent low-temperature toughness • Good weldability • High mechanical strength • Controlled chemical composition • Full-length heat treatment • Longitudinal or helical welding options • Hot-finished and cold-finished options • Suitable for low-temperature piping systems Material Characteristics ISO 9330-5 steels are designed to maintain suitable strength and toughness at low temperatures. Nickel and manganese-nickel alloy grades provide enhanced low-temperature performance, while the unalloyed grades offer economical solutions for applicable pressure and piping requirements. Applications • Low-Temperature Piping • Pressure Piping Systems • Oil and Gas Equipment • Petrochemical Plants • Chemical Processing • Refrigeration Systems • Cryogenic-Related Equipment • Storage and Process Facilities • Industrial Piping • Low-Temperature Pressure Equipment Conclusion ISO 9330-5 Welded Steel Tubes provide reliable solutions for pressure applications and low-temperature piping systems requiring submerged arc-welded construction, controlled mechanical properties, and specified impact toughness. The standard covers unalloyed and alloyed grades including PL 21, PL 23, PL 25, PL 26, 11MnNi5-3, 13MnNi6-3, 12Ni14, X12Ni5 and X10Ni9. To place an order or make an enquiry for ISO 9330-5 Welded Steel Tubes, contact Ladhani Metal Corporation for your required grade, outside diameter, wall thickness, length, delivery condition, and quantity. #ISO9330-5 #ISO9330 #ISO9330-5SteelTubes #ISO9330-5Steel #ISO9330-5Standard #WeldedSteelTubes #SteelTubes #WeldedSteelPipe #PressureSteelTubes #PressurePurposeSteel #CarbonSteelTubes #AlloySteelTubes #SteelTubeManufacturer #SteelTubeSupplier #SteelTubeExporter #WeldedTubeManufacturer #WeldedTubeSupplier #WeldedTubeExporter #IndustrialSteel #EngineeringSteel #SteelProducts #SteelStockist #SteelDistributor #SteelManufacturer #SteelSupplier #SteelExporter #IndustrialMaterials #InternationalSteelStandards #PressureVesselSteel #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar

ISO 9330-3:1997 specifies technical delivery conditions for electric resistance welded (ERW) and induction welded circular steel tubes made from unalloyed and alloyed steels with specified low-temperature toughness properties. It covers tubes with wall thickness up to and including 16 mm and is intended for low-temperature piping systems. The current published edition remains ISO 9330-3:1997; ISO states that it was last reviewed and confirmed in 2012. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of ISO 9330-3 Welded Steel Tubes, supplied in required grades, outside diameters, wall thicknesses, lengths, and delivery conditions. Products can be supplied with mill test certificates and strict quality inspection as per international standards. Available Grades PL 21 | PL 23 | PL 25 | PL 26 | 11MnNi5-3 | 13MnNi6-3 | 12Ni14 | X12Ni5 Forms of Supply • ERW Steel Tubes | Electric Resistance Welded Tubes | Induction Welded Tubes | Hot-Finished Tubes | Cold-Finished Tubes | Circular Steel Tubes | Low-Temperature Tubes | Pressure Tubes | Cut-to-Length Tubes Steel Types • Unalloyed Low-Temperature Steel | PL 21 | PL 23 | PL 25 | PL 26 • Manganese-Nickel Alloy Steel | 11MnNi5-3 | 13MnNi6-3 • Nickel Alloy Steel | 12Ni14 | X12Ni5 Chemical Composition – Example Grade PL 21 • Carbon (C): Max. 0.17% • Silicon (Si): Max. 0.35% • Manganese (Mn): 0.40–1.00% • Phosphorus (P): Max. 0.030% • Sulfur (S): Max. 0.025% • Aluminium (Al): Min. 0.015% The standard requires the steels covered by ISO 9330-3 to be fully killed. Mechanical Properties • PL 21: Tensile strength 360–480 MPa | Minimum yield strength 215 MPa | Elongation min. 24% • PL 23: Tensile strength 410–530 MPa | Minimum yield strength 235 MPa | Elongation min. 22% • PL 25: Tensile strength 360–490 MPa | Minimum yield strength 255 MPa | Elongation min. 21% • PL 26: Tensile strength 460–580 MPa | Minimum yield strength 265 MPa | Elongation min. 21% • 11MnNi5-3: Tensile strength 410–530 MPa | Minimum yield strength 285 MPa | Elongation min. 22% • 13MnNi6-3: Tensile strength 490–610 MPa | Minimum yield strength 355 MPa | Elongation min. 20% • 12Ni14: Tensile strength 440–590 MPa | Minimum yield strength 245 MPa | Elongation min. 16% • X12Ni5: Tensile strength 510–710 MPa | Minimum yield strength 390 MPa | Elongation min. 17% Manufacturing and Delivery Conditions ISO 9330-3 tubes are manufactured using electric resistance or induction welding without filler metal. They may be supplied hot-finished or cold-finished and are suitably heat treated over their full length. Depending on the grade, normalizing, normalizing and tempering, or quenching and tempering may be used. Key Features • ERW and induction welded construction • Specified low-temperature toughness • Good weldability • Suitable for pressure piping • Controlled chemical composition • Reliable mechanical properties • Suitable for low-temperature service • Hot-finished and cold-finished options • Smooth internal and external surfaces • Available in different diameters and wall thicknesses Material Characteristics ISO 9330-3 steels are specifically designed for applications where welded steel tubes must maintain suitable strength and impact toughness at low temperatures. The standard includes Charpy V-notch impact requirements at specified temperatures for the covered grades. Applications • Low-Temperature Piping • Pressure Piping Systems • Refrigeration Systems • Cryogenic-Related Equipment • Petrochemical Piping • Oil and Gas Equipment • Chemical Processing Systems • Cold-Temperature Process Lines • Industrial Piping Systems • General Pressure Applications Conclusion ISO 9330-3 Welded Steel Tubes provide reliable solutions for low-temperature piping systems requiring welded construction, controlled mechanical properties, and specified impact toughness. The standard covers unalloyed and alloyed grades including PL 21, PL 23, PL 25, PL 26, 11MnNi5-3, 13MnNi6-3, 12Ni14 and X12Ni5. To place an order or make an enquiry for ISO 9330-3 Welded Steel Tubes, contact Ladhani Metal Corporation for your required grade, outside diameter, wall thickness, length, delivery condition, and quantity. #ISO9330-3 #ISO9330 #ISO9330-3SteelTubes #ISO9330-3Steel #ISO9330-3Standard #WeldedSteelTubes #SteelTubes #WeldedSteelPipe #PressureSteelTubes #PressurePurposeSteel #CarbonSteelTubes #AlloySteelTubes #SteelTubeManufacturer #SteelTubeSupplier #SteelTubeExporter #WeldedTubeManufacturer #WeldedTubeSupplier #WeldedTubeExporter #IndustrialSteel #EngineeringSteel #SteelProducts #SteelStockist #SteelDistributor #SteelManufacturer #SteelSupplier #SteelExporter #IndustrialMaterials #InternationalSteelStandards #PressureVesselSteel #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi

Titanium Clad Plate is a composite metal plate manufactured by bonding a layer of titanium to a base metal, typically carbon steel or alloy steel. It combines the excellent corrosion resistance and lightweight properties of titanium with the strength, structural support, and cost efficiency of the base steel. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of Titanium Clad Plates, available in different titanium grades, base materials, thicknesses, widths, lengths, and cladding configurations. The plates can be supplied for demanding industrial applications requiring corrosion resistance and structural strength. Forms of Supply • Titanium Clad Plates | Titanium Clad Steel Plates | Titanium Bonded Plates | Titanium Clad Sheets | Titanium Clad Strips | Custom Clad Plates | Cut-to-Size Plates Titanium Cladding Materials • Grade 1 Titanium • Grade 2 Titanium • Grade 5 Titanium • Grade 7 Titanium • Grade 12 Titanium Base Materials • Carbon Steel • Low-Alloy Steel • Pressure Vessel Steel • Structural Steel • Alloy Steel Manufacturing Methods Titanium clad plates can be produced using controlled bonding processes such as explosion bonding, hot rolling, or other qualified metallurgical cladding methods. The selected process depends on the required plate dimensions, titanium grade, base material, bond strength, and service conditions. Key Features • Excellent corrosion resistance • High resistance to seawater and chloride environments • High strength-to-weight ratio • Metallurgically bonded construction • Good resistance to many chemical environments • Lower material cost compared with solid titanium plates • Suitable for pressure equipment • Excellent service performance • Customizable titanium and base-metal thickness • Suitable for fabrication and welding with appropriate procedures Material Characteristics Titanium provides the corrosion-resistant surface while the carbon or alloy steel backing provides structural strength and stiffness. This combination allows titanium clad plates to be used where solid titanium would be technically suitable but economically or structurally excessive. Applications • Chemical Processing Equipment • Heat Exchangers • Pressure Vessels • Condensers • Desalination Equipment • Petrochemical Equipment • Oil & Gas Equipment • Power Generation • Chlor-Alkali Equipment • Seawater Applications • Marine Equipment • Storage Tanks • Process Equipment Conclusion Titanium Clad Plates provide an effective combination of titanium's excellent corrosion resistance and steel's structural strength. They are suitable for demanding chemical, marine, petrochemical, power generation, heat-exchanger, and pressure-equipment applications. To place an order or make an enquiry for Titanium Clad Plates, contact Ladhani Metal Corporation for your required titanium grade, base material, thickness, dimensions, cladding method, and quantity. #TitaniumCladPlate #TitaniumCladPlates #TitaniumCladding #TitaniumPlate #TitaniumSteelPlate #CladPlate #CladdedPlate #TitaniumBondedPlate #TitaniumCompositePlate #TitaniumMetal #TitaniumMaterials #TitaniumSheet #TitaniumAlloyPlate #TitaniumCladSteel #CladSteelPlate #TitaniumSupplier #TitaniumManufacturer #TitaniumExporter #CladPlateSupplier #CladPlateManufacturer #CladPlateExporter #IndustrialMaterials #SpecialtyMetal #TitaniumProducts #MetalSupplier #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior @Mumbai @Delhi @Chennai @Kolkata @Hyderabad @Bengaluru

ISO 9329-3:1997 specifies technical delivery conditions for seamless circular steel tubes made from unalloyed and alloyed steels with specified low-temperature toughness properties. These tubes are intended primarily for low-temperature piping systems. ISO confirms ISO 9329-3:1997 as the current published edition; it was last reviewed and confirmed in 2012 and is currently under review. It replaced ISO 2604-2:1975. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of ISO 9329-3 Seamless Steel Tubes, available in required grades, outside diameters, wall thicknesses, lengths and delivery conditions. Products can be supplied with mill test certificates and strict quality inspection as per international standards. Available Grades PL 21 | PL 23 | PL 25 | PL 26 | X10Ni9 The standard covers unalloyed and alloyed steel grades with specified low-temperature toughness. Forms of Supply • Seamless Steel Tubes | Hot-Finished Tubes | Cold-Finished Tubes | Low-Temperature Tubes | Pressure Piping Tubes | Precision Tubes | Cut-to-Length Tubes | Custom Size Tubes Steel Types • Unalloyed Low-Temperature Steel | PL 21 | PL 23 | PL 25 | PL 26 • Nickel Alloy Steel | X10Ni9 Chemical Composition – Example Grade X10Ni9 • Carbon (C): Max. 0.13% • Silicon (Si): 0.15–0.35% • Manganese (Mn): 0.30–0.80% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.020% • Nickel (Ni): 8.50–10.00% The standard requires the steels to be fully killed and specifies chemical composition by heat analysis. Manufacturing and Delivery Conditions ISO 9329-3 tubes are manufactured by a seamless process and may be supplied as hot-finished or cold-finished tubes. Depending on the steel grade, specified heat treatments include normalizing, normalizing and tempering, or quenching and tempering. Mechanical Properties • PL 21: Tensile strength 360–480 MPa • PL 23: Tensile strength 410–530 MPa • PL 25: Tensile strength 360–490 MPa • PL 26: Tensile strength 460–580 MPa • X10Ni9: Mechanical properties specified according to grade, tube dimensions and heat-treatment condition ISO 9329-3 also specifies impact testing at designated low temperatures to characterize the cold toughness of the grades. Key Features • Seamless construction • Low-temperature toughness • Good weldability • Suitable for low-temperature piping • High reliability under pressure • Good mechanical strength • Controlled chemical composition • Hot-finished and cold-finished options • Suitable for demanding service conditions • Available in different dimensions and lengths Material Characteristics ISO 9329-3 steels are designed to maintain suitable toughness and mechanical properties at low temperatures. The standard specifies Charpy V-notch impact requirements at designated temperatures, making the material suitable for piping systems exposed to low-temperature service conditions. Applications • Low-Temperature Piping Systems • Refrigeration Systems • Cryogenic-Related Piping • Petrochemical Piping • Oil and Gas Equipment • Chemical Processing • Storage and Process Facilities • Low-Temperature Industrial Systems • General Pressure Piping Conclusion ISO 9329-3 Seamless Steel Tubes provide reliable solutions for low-temperature piping systems requiring specified toughness, strength and seamless construction. The standard covers unalloyed and alloyed grades including PL 21, PL 23, PL 25, PL 26 and X10Ni9, with suitable heat treatment and low-temperature impact properties. To place an order or make an enquiry for ISO 9329-3 Seamless Steel Tubes, contact Ladhani Metal Corporation for your required grade, size, wall thickness, length and delivery condition. #ISO9329 #ISO9329Steel #ISO9329Forgings #ISO9329Standard #ISO9329SteelProducts #SteelForgings #SteelForgingManufacturer #SteelForgingSupplier #SteelForgingExporter #AlloySteelForgings #CarbonSteelForgings #PressureSteel #PressureVesselSteel #EngineeringSteel #IndustrialSteel #SpecialtySteel #ForgedSteel #SteelManufacturer #SteelSupplier #SteelExporter #SteelStockist #SteelDistributor #MetalSupplier #MetalExporter #HighStrengthSteel #PressurePurposeSteel #IndustrialMaterials #InternationalSteelStandards #SteelProducts #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai

ISO 9327 covers steel forgings and rolled or forged bars for pressure purposes. The series consists of five parts covering general requirements, elevated-temperature steels, nickel steels for low-temperature service, weldable fine-grain high-proof-strength steels, and stainless steels. The currently published ISO 9327 editions date from 1999 and remain current, while revised ISO/DIS 9327-1 through ISO/DIS 9327-5 are currently under development and are intended to replace the 1999 editions. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of ISO 9327 Steel Forged Bars, supplied in required grades, diameters, lengths, heat-treatment conditions, and surface finishes. Products can be supplied with mill test certificates and strict quality inspection as per international standards. ISO 9327 Series ISO 9327-1 – General Requirements Covers technical delivery conditions for steel forgings and rolled or forged bars for pressure purposes, including general requirements for material, manufacture, testing, inspection, dimensions and delivery conditions. ISO 9327-2 – Non-Alloy and Alloy Steels Covers Mo, Cr and CrMo steels with specified elevated-temperature properties. The standard includes requirements for chemical composition, tensile properties, impact properties and elevated-temperature proof strength. ISO 9327-3 – Nickel Steels Covers nickel steels with specified low-temperature properties for pressure applications, including requirements for chemical composition, tensile properties and impact properties. ISO 9327-4 – Weldable Fine-Grain Steels Covers weldable fine-grain steels with high proof strength. Grades are classified into room-temperature, elevated-temperature, low-temperature, and combined low- and elevated-temperature categories. ISO 9327-5 – Stainless Steels Covers austenitic and austenitic-ferritic stainless steels for pressure-purpose forgings and rolled or forged bars. Forms of Supply • Forged Bars | Rolled Bars | Open-Die Forgings | Ring Rolled Forgings | Closed-Die Forgings | Round Bars | Square Bars | Flat Bars | Custom Forgings | Cut-to-Length Bars Steel Types • Non-Alloy Pressure Vessel Steel • Alloy Cr-Mo Steel • Nickel Steel • Weldable Fine-Grain Steel • Austenitic Stainless Steel • Austenitic-Ferritic Stainless Steel Chemical Composition – Example Grade P250GH • Carbon (C): Max. 0.20% • Silicon (Si): Max. 0.40% • Manganese (Mn): 0.80–1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.015% • Chromium (Cr): Max. 0.30% • Nickel (Ni): Max. 0.30% • Molybdenum (Mo): Max. 0.08% Key Features • High structural integrity • Suitable for pressure applications • Excellent forging characteristics • Good mechanical strength • Controlled chemical composition • Heat-treatment options • Suitable for demanding service conditions • Available in alloy and stainless grades • Suitable for large-section components • Available in custom dimensions Material Characteristics ISO 9327 forged bars are intended for pressure equipment and related applications where controlled chemical composition, mechanical properties and reliable quality are required. Depending on the applicable part and grade, the material can provide elevated-temperature strength, low-temperature toughness, high proof strength or corrosion resistance. Applications • Pressure Vessels • Boilers • Heat Exchangers • Power Generation Equipment • Petrochemical Equipment • Process Equipment • Pressure Components • Heavy Engineering • Chemical Processing Equipment • Oil and Gas Equipment • High-Temperature Equipment • Low-Temperature Pressure Equipment Conclusion ISO 9327 Steel Forged Bars provide pressure-purpose material solutions covering non-alloy, alloy, nickel, fine-grain and stainless steel grades. The five-part series addresses different temperature, strength, toughness and corrosion-resistance requirements for demanding pressure equipment. To place an order or make an enquiry for ISO 9327 Steel Forged Bars, contact Ladhani Metal Corporation for your required grade, diameter, length, heat-treatment condition and quantity. #ISO9327 #ISO9327Steel #ISO9327Bars #ISO9327SteelBars #ISO9327Standard #SteelBars #SteelBarSupplier #SteelBarManufacturer #SteelBarExporter #AlloySteelBars #CarbonSteelBars #StainlessSteelBars #EngineeringSteel #IndustrialSteel #SpecialtySteel #ForgedSteelBars #HotRolledSteelBars #SteelProducts #SteelStockist #SteelDistributor #SteelSupplier #SteelManufacturer #SteelExporter #IndustrialMaterials #MetalSupplier #MetalExporter #PrecisionSteel #HighStrengthSteel #InternationalSteelStandards #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh

ISO 5952:2019 specifies requirements for hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance, also known as weather-resistant structural steel. The standard covers steel intended for structures where mechanical properties and increased resistance to atmospheric corrosion are required. The current ISO 5952:2019 edition was reviewed and confirmed in 2024. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of ISO 5952 Hot-Rolled Steel Sheet – Weathering Steel, available in required grades, classes, thicknesses, widths, lengths, coils, and cut-to-size sheets. Products can be supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply • Hot-Rolled Steel Sheets | Weathering Steel Sheets | Atmospheric Corrosion Resistant Sheets | Structural Steel Sheets | Hot-Rolled Coils | Cut-to-Length Sheets | Descaled Sheets | Pickled Sheets | Oiled Sheets | Custom Cut Sheets Available Grades HSA 235W | HSA 245W | HSA 355W1 | HSA 355W2 | HSA 365W Classes • Class A – Suitable for moderate loading conditions • Class B – Intended for welded structures and structural parts subjected to normal loading conditions • Class C – Intended where some resistance to brittle fracture is required • Class D – Intended where high resistance to brittle fracture is required ISO 5952:2019 identifies HSA 235W, HSA 245W, HSA 355W1, HSA 355W2 and HSA 365W, with the applicable classes specified in the standard. Chemical Composition – Example Grade HSA 355W1 • Carbon (C): Max. 0.12% • Manganese (Mn): Max. 1.00% • Silicon (Si): 0.20–0.75% • Phosphorus (P): Max. 0.035% • Sulfur (S): Max. 0.035% • Copper (Cu): 0.25–0.55% • Nickel (Ni): Max. 0.65% • Chromium (Cr): 0.30–1.25% The standard also permits microalloying elements such as vanadium, titanium and niobium, with the combined content of Mo, Nb, Ti, V and Zr limited to 0.15% where applicable. Mechanical Properties • HSA 235W: Yield strength min. 235 MPa | Tensile strength 360–510 MPa • HSA 245W: Yield strength min. 245 MPa | Tensile strength 400–540 MPa • HSA 355W1: Yield strength min. 355 MPa | Tensile strength 510–680 MPa • HSA 355W2: Yield strength min. 355 MPa | Tensile strength 510–680 MPa • HSA 365W: Yield strength min. 365 MPa | Tensile strength 490–610 MPa Elongation requirements vary according to grade, class, and sheet thickness. Dimensions and Thickness ISO 5952:2019 products are commonly supplied in thicknesses from 1.6 mm up to and including 12.5 mm and widths of 600 mm and over. They may be supplied in coils or cut lengths. Hot-rolled sheet below 600 mm wide may be slit from wider sheet and is still considered sheet. Surface Conditions • Hot-Rolled Surface • Descaled Surface • Pickled Surface • Oiled Surface • Unoiled Surface Hot-rolled material normally has oxide or scale from the rolling process. Scale can be removed by pickling or mechanical methods such as grit blasting. Descaled sheet may also be supplied with oil to help prevent rusting. Key Features • Improved atmospheric corrosion resistance • Weather-resistant steel characteristics • Good structural strength • Suitable for welded structures • Good weldability with appropriate welding conditions • High resistance to atmospheric exposure • Good dimensional consistency • Available in different strength levels • Suitable for bolted, riveted and welded structures • Available in coils and cut lengths Material Characteristics ISO 5952 weathering steel achieves improved atmospheric corrosion resistance through the intentional addition of alloying elements such as copper, chromium, nickel and phosphorus. These elements promote the formation of a protective oxide layer on the steel surface. The actual corrosion performance also depends on factors such as the surrounding atmosphere and structural design. Applications • Bridges • Structural Frameworks • Industrial Structures • Outdoor Structural Components • Railway Structures • Transportation Infrastructure • Buildings and Architectural Structures • Storage Structures • Welded Structural Components • Bolted Structures • Riveted Structures • General Engineering Structures ISO 5952 specifically identifies bolted, riveted and welded structures as intended uses for the covered weather-resistant structural steel sheets. Conclusion ISO 5952 Hot-Rolled Steel Sheet – Weathering Steel provides structural steel with improved atmospheric corrosion resistance along with specified mechanical properties. The grades HSA 235W, HSA 245W, HSA 355W1, HSA 355W2 and HSA 365W are available in different classes and dimensions to meet structural and engineering requirements. To place an order or make an enquiry for ISO 5952 Hot-Rolled Steel Sheet – Weathering Steel, contact Ladhani Metal Corporation for your required grade, class, thickness, width, length, surface condition and quantity.

ISO 4957:2018 specifies requirements for wrought tool steels covering non-alloy cold-work tool steels, alloy cold-work tool steels, alloy hot-work tool steels, and high-speed tool steels. The standard applies to products such as hot-rolled, forged, cold-drawn, cold-rolled and powder-metallurgy products supplied in specified surface and heat-treatment conditions. ISO confirms the 2018 edition as the current edition, reviewed and confirmed in 2023. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of ISO 4957 Tool Steels, available in different grades, sizes, forms, surface conditions, and heat-treatment conditions. Products can be supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply • Tool Steel Bars | Round Bars | Flat Bars | Square Bars | Hexagonal Bars | Tool Steel Plates | Tool Steel Sheets | Forgings | Cold Drawn Bars | Hot Rolled Bars | Ground Bars | Precision Ground Bars | Tool Steel Strips Available Grades 105V | 50WCrV8 | 60WCrV8 | 102Cr6 | 21MnCr5 | 70MnMoCr8 | 90MnCrV8 | 95MnWCr5 | X100CrMoV5 | X153CrMoV12 | X210Cr12 | X210CrW12 | 35CrMo7 | 40CrMnNiMo8-6-4g | 45NiCrMo16 | 55NiCrMoV7 | 32CrMoV12-28 | X37CrMoV5-1 | X38CrMoV5-3 | X40CrMoV5-1 | 50CrMoV13-15 | X30WCrV9-3 | X35CrWMoV5 | 38CrCoWV18-17-17 The ISO 4957:2018 tables classify tool steels according to cold-work, hot-work and high-speed tool-steel groups. The grades supplied under the standard include alloy cold-work and hot-work grades such as 105V, 50WCrV8, 60WCrV8, 102Cr6, 21MnCr5, 70MnMoCr8 and 90MnCrV8. Steel Types • Alloy Cold-Work Tool Steels | 105V | 50WCrV8 | 60WCrV8 | 102Cr6 | 21MnCr5 | 70MnMoCr8 | 90MnCrV8 | 95MnWCr5 | X100CrMoV5 | X153CrMoV12 | X210Cr12 | X210CrW12 • Alloy Tool Steels for Toughness and Strength | 35CrMo7 | 40CrMnNiMo8-6-4g | 45NiCrMo16 | 55NiCrMoV7 | 32CrMoV12-28 • Hot-Work Tool Steels | X37CrMoV5-1 | X38CrMoV5-3 | X40CrMoV5-1 | 50CrMoV13-15 | X30WCrV9-3 | X35CrWMoV5 | 38CrCoWV18-17-17 Chemical Composition – Example Grade X153CrMoV12 • Carbon (C): 1.45–1.70% • Silicon (Si): Max. 0.40% • Manganese (Mn): Max. 0.40% • Chromium (Cr): 11.00–12.50% • Molybdenum (Mo): 0.70–1.00% • Vanadium (V): 0.70–1.00% • Phosphorus (P): Max. 0.030% • Sulfur (S): Max. 0.030% X153CrMoV12 is an alloy cold-work tool steel characterized by high carbon and chromium content with molybdenum and vanadium additions, providing high hardness and wear resistance after suitable heat treatment. ISO 4957 includes this grade among its alloy cold-work tool steels. Mechanical Properties • High hardness after hardening and tempering • Excellent wear resistance • Good dimensional stability • High compressive strength • Good toughness depending on grade • Good resistance to deformation • High resistance to abrasion • Suitable for demanding tooling conditions The ISO 4957 standard provides reference values for annealed hardness, austenitizing temperature, tempering temperature and hardness in the hardened and tempered condition for the specified grades. Key Features • High hardness • Excellent wear resistance • High strength • Good toughness • Excellent dimensional stability • Good machinability in annealed condition • High resistance to abrasion • Suitable for precision tooling • Good heat-treatment response • Available in different grades and forms • Suitable for demanding tooling operations Material Characteristics ISO 4957 Tool Steels are selected according to the required combination of hardness, wear resistance, toughness, strength, dimensional stability and hot-temperature performance. Alloying elements such as chromium, molybdenum, vanadium, tungsten and nickel provide different combinations of wear resistance, hardenability, toughness and resistance to thermal effects. Applications • Dies • Punches • Cutting Tools • Blanking Tools • Forming Tools • Stamping Tools • Press Tools • Moulds • Shear Blades • Industrial Knives • Rollers • Gauges • Jigs and Fixtures • Hot-Working Dies • Forging Dies • Extrusion Tooling • Plastic Moulding Tools • Precision Engineering Tools Conclusion ISO 4957 Tool Steels provide a wide range of alloy and high-performance steels for cold-work, hot-work and other demanding tooling requirements. The available grades offer different combinations of hardness, wear resistance, toughness, strength and dimensional stability, allowing the appropriate grade to be selected according to tooling requirements. To place an order or make an enquiry for ISO 4957 Tool Steels, contact Ladhani Metal Corporation for your required grade, size, form, surface condition, heat-treatment condition and quantity. #ISO4957 #ISO4957ToolSteels #ISO4957Steel #ISO4957ToolSteel #ToolSteels #ToolSteel #ToolSteelBars #ToolSteelSupplier #ToolSteelManufacturer #ToolSteelExporter #ColdWorkToolSteel #HotWorkToolSteel #HighSpeedToolSteel #AlloyToolSteel #CarbonToolSteel #DieSteel #MouldSteel #PrecisionToolSteel #ToolSteelBarsSupplier

EN 10305-3 specifies technical delivery conditions for welded cold sized steel tubes used for precision applications. The tubes are characterized by closely controlled dimensional tolerances and specified surface quality. The standard covers circular tubes and, in its newer edition, also square and rectangular sections for precision applications. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of EN 10305-3 Welded Cold Sized Steel Tubes, available in different grades, sizes, wall thicknesses, lengths, and delivery conditions. Tubes can be supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply • Welded Cold Sized Tubes | Precision Steel Tubes | Cold Sized Tubes | ERW Precision Tubes | Mechanical Tubes | Automotive Tubes | Hydraulic Tubes | Pneumatic Tubes | Round Tubes | Square Tubes | Rectangular Tubes | Cut-to-Length Tubes Available Grades E155 | E190 | E195 | E220 | E235 | E260 | E275 Steel Types • Low-Strength Precision Steel | E155 | E190 | E195 | E220 • Medium-Strength Precision Steel | E235 | E260 | E275 Chemical Composition – Example Grade E355 • Carbon (C): Max. 0.22% • Silicon (Si): Max. 0.55% • Manganese (Mn): Max. 1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% • Aluminium (Al): Min. 0.020% These are the cast-analysis limits listed for E355 in EN 10305-3. Mechanical Properties • E155: Tensile strength 270–410 MPa | Minimum yield strength 155 MPa | Minimum elongation 28% • E195: Tensile strength 300–440 MPa | Minimum yield strength 195 MPa | Minimum elongation 28% • E235: Tensile strength 340–480 MPa | Minimum yield strength 235 MPa | Minimum elongation 25% • E275: Tensile strength 410–550 MPa | Minimum yield strength 275 MPa | Minimum elongation 22% The listed mechanical values apply to the specified delivery condition and can vary with grade, tube dimensions, and delivery condition. Delivery Conditions • +CR1 – Cold Rolled / Cold Sized Condition • +A – Annealed Condition • +N – Normalized Condition The mechanical properties are specified according to the applicable delivery condition. Key Features • Welded construction • Cold sized finish • Excellent dimensional accuracy • Closely controlled tolerances • Controlled surface roughness • Good surface finish • Consistent wall thickness • Good concentricity • Reliable mechanical properties • Suitable for precision machining • Available in different steel grades • Suitable for automotive and engineering components Material Characteristics EN 10305-3 tubes combine welded tube production with cold sizing to achieve precise dimensions and controlled surface quality. Cold sizing improves dimensional consistency and allows tubes to be supplied for applications where accurate outside dimensions, wall thickness, and surface condition are important. Applications • Automotive Components • Vehicle Components • Mechanical Engineering • General Engineering • Furniture Components • Precision Machinery • Hydraulic Components • Pneumatic Components • Machine Parts • Precision Fabrication • Structural Machinery Components • Tubular Engineering Components The standard identifies vehicle, furniture, and general engineering among the typical application fields for these precision tubes. Conclusion EN 10305-3 Welded Cold Sized Steel Tubes provide precision-engineered solutions requiring accurate dimensions, controlled tolerances, and specified surface quality. The range includes conventional E-series precision steels along with higher-strength and advanced steel grades for demanding engineering requirements. To place an order or make an enquiry for EN 10305-3 Welded Cold Sized Steel Tubes, contact Ladhani Metal Corporation for your required grade, size, wall thickness, length, and delivery condition. #EN10305.3 #EN10305.3SteelTubes #EN10305.3Tubes #EN10305.3WeldedTubes #EN10305.3PrecisionTubes #EN10305.3SteelTubeSupplier #EN10305.3SteelTubeManufacturer #EN10305.3SteelTubeExporter #WeldedPrecisionTubes #PrecisionSteelTubes #ColdSizedSteelTubes #ColdFinishedTubes #WeldedSteelTubes #MechanicalTubes #EngineeringSteelTubes #CarbonSteelTubes #PrecisionTubes #AutomotiveSteelTubes #HydraulicTubes #PneumaticTubes #MachineTubes #IndustrialSteelTubes #SteelTubeSupplier #SteelTubeManufacturer #SteelTubeExporter #PrecisionTubeSupplier #EuropeanSteelStandard #ENSteelStandard #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad

EN 10305-2 specifies technical delivery conditions for welded cold drawn steel tubes used for precision applications. These tubes are manufactured from electric-welded hollows followed by cold drawing, providing close dimensional tolerances, controlled surface quality, and reliable mechanical properties. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of EN 10305-2 Welded Cold Drawn Steel Tubes, available in different grades, sizes, wall thicknesses, lengths, and delivery conditions. Tubes can be supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply • Welded Cold Drawn Tubes | Precision Steel Tubes | ERW Cold Drawn Tubes | Mechanical Tubes | Automotive Tubes | Hydraulic Tubes | Pneumatic Tubes | Cylinder Tubes | Cut-to-Length Tubes | Custom Size Tubes Available Grades E155 | E195 | E235 | E275 | E355 These grades are identified in EN 10305-2 for welded cold drawn precision tubes. Delivery Conditions • +C – Cold Drawn / Hard • +LC – Cold Drawn / Soft • +SR – Cold Drawn and Stress Relieved • +A – Annealed • +N – Normalized EN 10305-2 specifies these delivery conditions according to the required mechanical properties and manufacturing condition. Steel Types • E155 – Low-strength precision steel • E195 – Non-alloy precision steel • E235 – Medium-strength precision steel • E275 – Higher-strength precision steel • E355 – High-strength precision steel Chemical Composition – Example Grade E355 • Carbon (C): Max. 0.22% • Silicon (Si): Max. 0.35% • Manganese (Mn): Max. 1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% The EN 10305-2 composition limits vary by grade; for E355, the cited standard data gives maximum values of 0.22% C, 0.35% Si, 1.60% Mn, 0.025% P and 0.025% S. Mechanical Properties • E155: Tensile strength 270–410 MPa and minimum yield strength 155 MPa in +N condition • E195: Tensile strength 300–440 MPa and minimum yield strength 195 MPa in +N condition • E235: Tensile strength 340–480 MPa and minimum yield strength 235 MPa in +N condition • E275: Tensile strength 410–550 MPa and minimum yield strength 275 MPa in +N condition • E355: Tensile strength 490–630 MPa and minimum yield strength 355 MPa in +N condition Mechanical properties vary according to grade and delivery condition. Key Features • Welded and cold drawn construction • Excellent dimensional accuracy • Tight outside diameter tolerances • Controlled wall thickness • Smooth surface finish • Good concentricity • Reliable mechanical properties • Suitable for precision machining • Available in multiple delivery conditions • Suitable for further forming and fabrication • Consistent quality for mass production Material Characteristics EN 10305-2 tubes combine an electric-welded manufacturing process with cold drawing to achieve close dimensional tolerances and improved surface quality. The cold drawing operation can also modify the mechanical properties according to the selected delivery condition. Applications • Automotive Components • Mechanical Engineering • Precision Machinery • Hydraulic Cylinders • Pneumatic Cylinders • Shock Absorbers • Telescopic Cylinders • Furniture Components • Machine Components • Precision Fabrication • General Engineering • Vehicle Components EN 10305-2 tubes are commonly associated with vehicle, furniture, and general engineering applications. Conclusion EN 10305-2 Welded Cold Drawn Steel Tubes provide precision-engineered solutions where accurate dimensions, controlled surface quality, and reliable mechanical properties are required. The E155, E195, E235, E275, and E355 grades are available in different delivery conditions to meet specific engineering requirements. To place an order or make an enquiry for EN 10305-2 Welded Cold Drawn Steel Tubes, contact Ladhani Metal Corporation for your required grade, size, wall thickness, length, and delivery condition. #EN10305.2 #EN10305.2SteelTubes #EN10305.2Tubes #EN10305.2WeldedTubes #EN10305.2PrecisionTubes #EN10305.2ColdDrawnTubes #EN10305.2SteelTubeSupplier #EN10305.2SteelTubeManufacturer #EN10305.2SteelTubeExporter #PrecisionSteelTubes #WeldedPrecisionTubes #ColdDrawnSteelTubes #ColdFinishedTubes #PrecisionTubes #MechanicalTubes #EngineeringSteelTubes #CarbonSteelTubes #AutomotiveSteelTubes #HydraulicTubes #PneumaticTubes #MachineTubes #PrecisionSteelTubeSupplier #SteelTubeSupplier #SteelTubeManufacturer #SteelTubeExporter #EuropeanSteelStandard #ENSteelStandard #SteelTubesIndia #LadhaniMetals #PrecisionTubeSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada

EN 10305-1 specifies seamless cold drawn steel tubes for precision applications. These tubes are produced with controlled dimensional tolerances and surface quality, making them suitable for applications requiring accurate dimensions, reliable mechanical properties, and a smooth surface finish. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of EN 10305-1 Seamless Cold Drawn Steel Tubes, supplied in required grades, outside diameters, wall thicknesses, lengths, and delivery conditions. Tubes can be supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply • Seamless Cold Drawn Tubes | Precision Steel Tubes | Cold Finished Tubes | Hydraulic Tubes | Pneumatic Tubes | Mechanical Tubes | Cylinder Tubes | Honed Tubes | Cut-to-Length Tubes | Custom Size Tubes Available Grades E215 | E235 | E355 | E355+SR | E355+N | E355K2 Steel Types • Non-Alloy Steel Tubes | E215 | E235 | E355 • Precision Engineering Steel Tubes | E355+SR | E355+N • High-Strength Engineering Steel | E355K2 Chemical Composition – Example Grade E355 • Carbon (C): Max. 0.22% • Silicon (Si): Max. 0.55% • Manganese (Mn): Max. 1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% Mechanical Properties • E215: Minimum yield strength and tensile strength according to tube dimensions and delivery condition • E235: Balanced strength and ductility for precision engineering applications • E355: Higher-strength precision steel tube grade • E355+SR: Stress-relieved condition with improved dimensional stability • E355+N: Normalized condition providing consistent mechanical properties • E355K2: Higher-strength engineering steel with enhanced toughness requirements Key Features • Seamless construction • Cold drawn manufacturing process • Excellent dimensional accuracy • Smooth internal and external surface • Tight dimensional tolerances • Good mechanical strength • Good machinability • Reliable concentricity • Suitable for precision applications • Available in different delivery conditions • Suitable for further machining and fabrication Material Characteristics EN 10305-1 tubes are precision cold drawn steel tubes designed for applications where dimensional accuracy and surface quality are important. Cold drawing provides close dimensional tolerances and a smooth surface, while the selected steel grade and delivery condition determine the required strength, ductility, toughness, and machinability. Applications • Hydraulic Systems • Pneumatic Systems • Automotive Components • Mechanical Engineering • Machinery Components • Hydraulic Cylinders • Pneumatic Cylinders • Shock Absorbers • Precision Machine Parts • Automotive Fuel Systems • Drive Components • General Engineering Equipment Conclusion EN 10305-1 Seamless Cold Drawn Steel Tubes provide precision-engineered solutions for applications requiring accurate dimensions, smooth surface finish, reliable mechanical properties, and seamless construction. They are available in different steel grades and delivery conditions to meet various mechanical and engineering requirements. To place an order or make an enquiry for EN 10305-1 Seamless Cold Drawn Steel Tubes, contact Ladhani Metal Corporation for your required grade, size, wall thickness, length, and delivery condition. #EN10305 #EN10305SteelTubes #EN10305Tubes #EN10305SeamlessTubes #EN10305PrecisionTubes #EN10305ColdDrawnTubes #EN10305SteelTubeSupplier #EN10305SteelTubeManufacturer #EN10305SteelTubeExporter #PrecisionSteelTubes #ColdDrawnSteelTubes #SeamlessSteelTubes #ColdFinishedTubes #PrecisionTubes #MechanicalTubes #EngineeringSteelTubes #CarbonSteelTubes #AlloySteelTubes #StainlessSteelTubes #HydraulicTubes #AutomotiveSteelTubes #MachineTubes #PrecisionSteelTubeSupplier #SteelTubeSupplier #SteelTubeManufacturer #SteelTubeExporter #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru

EN 10297-1 specifies seamless circular steel tubes intended for mechanical and general engineering applications. These tubes are available in a range of non-alloy and alloy steel grades, offering a combination of strength, machinability, dimensional accuracy, and reliable performance. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of EN 10297-1 Seamless Circular Steel Tubes, supplied in required grades, sizes, wall thicknesses, lengths, and delivery conditions. Products can be supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply • Seamless Circular Steel Tubes | Hot Finished Tubes | Cold Drawn Tubes | Precision Tubes | Mechanical Tubes | Engineering Tubes | Hollow Sections | Cut-to-Length Tubes | Custom Sizes Available Grades E355 | E470 | E590 | E700 | C35E | C45E | 25CrMo4 | 42CrMo4 | 34CrNiMo6 Steel Types • Non-Alloy Engineering Steel | C35E | C45E • Alloy Engineering Steel | 25CrMo4 | 42CrMo4 | 34CrNiMo6 • High-Strength Engineering Steel | E355 | E470 | E590 | E700 Chemical Composition – Example Grade C45E • Carbon (C): 0.42–0.50% • Silicon (Si): Max. 0.40% • Manganese (Mn): 0.50–0.80% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.035% • Chromium (Cr): Max. 0.40% • Nickel (Ni): Max. 0.40% • Molybdenum (Mo): Max. 0.10% Mechanical Properties • E355: High-strength engineering steel with mechanical values dependent on tube dimensions and delivery condition • E470: Higher-strength engineering tube grade for demanding mechanical applications • E590: High-strength engineering steel suitable for components requiring elevated strength • E700: Very high-strength engineering steel for demanding structural and mechanical components • C35E: Medium-carbon engineering steel offering balanced strength and machinability • C45E: Medium-carbon steel with good strength and hardness potential • 25CrMo4: Alloy steel with good strength and toughness • 42CrMo4: High-strength alloy engineering steel with excellent hardenability • 34CrNiMo6: Nickel-chromium-molybdenum steel offering high strength and toughness Key Features • Seamless construction • High dimensional accuracy • Good mechanical strength • Excellent machinability • Good toughness • Suitable for precision engineering • Available in hot finished and cold drawn conditions • Suitable for machining and forming • Consistent wall thickness • Reliable performance under mechanical loading • Available in different sizes and lengths Material Characteristics EN 10297-1 seamless circular steel tubes are designed for applications where mechanical performance, dimensional precision, and reliable material properties are important. Depending on the selected grade, the tubes can provide enhanced tensile strength, toughness, hardenability, wear resistance, and machinability. Applications • Mechanical Engineering • Automotive Components • Hydraulic Components • Machinery Manufacturing • Shafts and Axles • Cylinders • Drive Components • Gear Components • Structural Machinery Parts • Precision-Machined Components • Agricultural Machinery • General Engineering Equipment Conclusion EN 10297-1 Seamless Circular Steel Tubes provide reliable solutions for mechanical engineering and general engineering applications requiring seamless construction, dimensional accuracy, strength, and machinability. Different non-alloy and alloy engineering steel grades can be selected according to the required mechanical performance and service conditions. To place an order or make an enquiry for EN 10297-1 Seamless Circular Steel Tubes, contact Ladhani Metal Corporation for your required grade, size, wall thickness, length, and delivery condition. #EN10297 #EN10297Steel #EN10297Tubes #EN10297SteelTubes #EN10297SeamlessTubes #EN10297SeamlessSteelTubes #EN10297SteelPipe #SeamlessSteelTubes #SeamlessSteelPipe #MechanicalSteelTubes #EngineeringSteelTubes #CircularSteelTubes #AlloySteelTubes #CarbonSteelTubes #MachineTubes #PrecisionSteelTubes #IndustrialSteelTubes #SteelTubesSupplier #SteelTubeManufacturer #SteelTubeExporter #SeamlessTubeSupplier #SeamlessTubeManufacturer #SeamlessTubeExporter #SteelPipeSupplier #SteelPipeManufacturer #EuropeanSteelStandard #ENSteelStandard #SteelTubesIndia #LadhaniMetals #SeamlessSteelSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli

EN 10277-3 specifies bright steel products made from free-cutting steels. These bright steel bars are designed for high-speed machining operations where excellent machinability, dimensional accuracy, surface finish, and consistent mechanical properties are required. The standard covers free-cutting steel products suitable for automatic machining and precision engineering applications. Manufactured in accordance with EN 10277-3, these bright steel products are supplied with specified requirements for chemical composition, mechanical properties, dimensional tolerances, surface condition, and delivery conditions. Free-cutting elements such as sulfur and lead, where applicable, improve machining performance and chip-breaking characteristics. Ladhani Metal Corporation supplies EN 10277-3 bright steel bars in various diameters, lengths, finishes, and delivery conditions for precision machining and general engineering requirements. Forms of Supply: • Bright Steel Bars | Bright Round Bars | Cold Drawn Bars | Peeled Bars | Ground Bars | Precision Steel Bars | Free-Cutting Steel Bars | Hexagonal Bars | Square Bars | Flat Bars | Cut-to-Length Bars Available Grades: 11SMn30 | 11SMn30+C | 11SMnPb30 | 11SMnPb30+C | 11SMn37 | 11SMnPb37 | 36SMnPb14 Steel Types: • 11SMn30 | 11SMn30+C | 11SMn37 – Free-Cutting Non-Alloy Steel • 11SMnPb30 | 11SMnPb30+C | 11SMnPb37 | 36SMnPb14 – Leaded Free-Cutting Steel Chemical Composition (11SMn30 Example): • Carbon (C): 0.07–0.14% • Silicon (Si): Max. 0.05% • Manganese (Mn): 0.90–1.30% • Phosphorus (P): Max. 0.11% • Sulfur (S): 0.27–0.33% Mechanical Properties: • 11SMn30: Mechanical properties according to diameter and delivery condition • 11SMn30+C: Mechanical properties according to diameter and delivery condition • 11SMnPb30: Mechanical properties according to diameter and delivery condition • 11SMnPb30+C: Mechanical properties according to diameter and delivery condition • 11SMn37: Mechanical properties according to diameter and delivery condition • 11SMnPb37: Mechanical properties according to diameter and delivery condition • 36SMnPb14: Mechanical properties according to diameter and delivery condition Key Features: • Excellent machinability • High-speed machining capability • Good chip-breaking characteristics • Excellent dimensional accuracy • Consistent surface finish • Suitable for automatic machining • Good production efficiency • Available in precision dimensions • Suitable for turning, drilling, milling, and threading • Available in various cross-sectional shapes Material Characteristics: EN 10277-3 free-cutting bright steel products are developed primarily for machining-intensive applications. Controlled additions of sulfur and, where applicable, lead improve machinability and chip formation, allowing efficient production of precision components. Bright finishing processes provide improved dimensional accuracy and surface quality for machining applications. Applications: • Automatic Screw Machines • CNC Machined Components • Precision Engineering Components • Automotive Components • Fasteners • Shafts • Bushes • Pins • Gears • Fittings • Nuts and Bolts • General Machine Components Conclusion: EN 10277-3 Bright Steel Bars - Free-Cutting Steel Products provide excellent machinability, dimensional accuracy, and surface finish for precision machining applications. The available free-cutting grades are suitable for high-volume production of automotive, engineering, fastener, and machine components. To place an order or make an enquiry for EN 10277-3 Bright Steel Bars, contact Ladhani Metal Corporation for your required grade, size, finish, and delivery condition. #EN10277.3 #EN10277.3Steel #EN10277.3BrightSteel #EN10277.3SteelBars #EN10277.3BrightBars #EN10277.3SteelSupplier #EN10277.3Manufacturer #EN10277.3Exporter #EN10277.3BrightSteelSupplier #EN10277.3BrightSteelManufacturer #EN10277.3BrightSteelExporter #BrightSteelBars #BrightSteelBar #BrightBars #BrightSteel #BrightSteelSupplier #BrightSteelManufacturer #BrightSteelExporter #ColdDrawnSteelBars #ColdFinishedSteelBars #PrecisionSteelBars #FreeCuttingSteel #FreeMachiningSteel #EngineeringSteelBars #SteelBarSupplier #SteelBarManufacturer #SteelBarExporter #EuropeanSteelStandard #LadhaniMetals #SteelBarSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar

EN 10296-1 specifies welded circular steel tubes made of non-alloy and alloy steels for mechanical and general engineering purposes. These tubes are designed for applications requiring reliable mechanical strength, dimensional accuracy, weld quality, and consistent performance in fabricated components and engineering structures. Manufactured in accordance with EN 10296-1, welded circular steel tubes are supplied with specified requirements for chemical composition, mechanical properties, dimensional tolerances, surface condition, testing, and inspection. The standard covers tubes manufactured from a range of steel grades selected according to the required mechanical and service conditions. Ladhani Metal Corporation supplies EN 10296-1 welded circular steel tubes in various outside diameters, wall thicknesses, lengths, and finishes for mechanical and engineering requirements. Forms of Supply: • Welded Circular Steel Tubes | Welded Steel Tubes | Mechanical Tubes | Precision Tubes | Structural Tubes | Engineering Tubes | ERW Tubes | Longitudinally Welded Tubes | Cut-to-Length Tubes | Custom Size Tubes Available Grades: E155 | E195 | E235 | E275 | E355 | E420 | E460 Steel Types: • E155 | E195 | E235 – Non-Alloy Steel • E275 | E355 – Non-Alloy Engineering Steel • E420 | E460 – High Strength Engineering Steel Chemical Composition (E355 Example): • Carbon (C): Max. 0.22% • Silicon (Si): Max. 0.55% • Manganese (Mn): Max. 1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% • Chromium (Cr): Max. 0.30% • Nickel (Ni): Max. 0.30% • Copper (Cu): Max. 0.30% Mechanical Properties: • E155: Yield Strength ≥ 155 MPa | Tensile Strength 290–430 MPa • E195: Yield Strength ≥ 195 MPa | Tensile Strength 320–480 MPa • E235: Yield Strength ≥ 235 MPa | Tensile Strength 360–510 MPa • E275: Yield Strength ≥ 275 MPa | Tensile Strength 430–580 MPa • E355: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • E420: Yield Strength ≥ 420 MPa | Tensile Strength according to product thickness and grade requirements • E460: Yield Strength ≥ 460 MPa | Tensile Strength according to product thickness and grade requirements Key Features: • Welded circular construction • Good mechanical strength • Consistent dimensional accuracy • Reliable weld quality • Good surface finish • Suitable for mechanical engineering • Available in different diameters and wall thicknesses • Suitable for fabrication and machining • Good weldability in applicable grades • Available in custom sizes and lengths Material Characteristics: EN 10296-1 welded circular steel tubes provide a practical combination of mechanical strength, dimensional precision, and fabrication performance. The range of grades allows selection of suitable material according to required strength and engineering conditions. Their circular welded construction makes them suitable for fabricated mechanical and general engineering components. Applications: • Mechanical Engineering • General Engineering • Automotive Components • Machinery Manufacturing • Structural Components • Industrial Equipment • Fabricated Assemblies • Transportation Equipment • Machine Frames • Mechanical Components • Construction Equipment Conclusion: EN 10296-1 Welded Circular Steel Tubes provide reliable solutions for mechanical and general engineering applications requiring controlled dimensions, mechanical strength, and consistent weld quality. To place an order or make an enquiry for EN 10296-1 Welded Circular Steel Tubes, contact Ladhani Metal Corporation for your required grade, size, wall thickness, finish, and specification. #EN10296.1 #EN10296.1Tubes #EN10296.1SteelTubes #EN10296.1WeldedTubes #WeldedSteelTubes #WeldedSteelPipe #MechanicalTubes #StructuralSteelTubes #CarbonSteelTubes #NonAlloySteelTubes #AlloySteelTubes #CircularSteelTubes #PrecisionSteelTubes #IndustrialSteelTubes #EngineeringSteelTubes #MachineTubes #AutomotiveSteelTubes #MechanicalSteelTubes #SteelTubeSupplier #SteelTubeManufacturer #WeldedTubeSupplier #WeldedPipeSupplier #SteelTubeExporter #EuropeanSteelStandard #ENSteelStandard #IndustrialSteelProducts #SteelTubesIndia #SteelPipeIndia #LadhaniMetals #SteelTubeSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli

EN 10270-3 specifies stainless steel spring wire manufactured for applications requiring high strength, spring properties, corrosion resistance, and reliable performance under demanding service conditions. The standard covers stainless spring wire suitable for the production of springs and other components where resistance to corrosion and fatigue is important. Manufactured in accordance with EN 10270-3, stainless steel spring wire is supplied with controlled chemical composition, mechanical properties, surface quality, dimensional tolerances, and spring performance requirements. Austenitic and precipitation-hardening stainless steel grades are commonly selected according to the required strength, corrosion resistance, and operating environment. Ladhani Metal Corporation supplies EN 10270-3 stainless steel spring wire in different diameters, finishes, coils, and delivery conditions to meet industrial and engineering requirements. Forms of Supply: • Stainless Steel Spring Wire | Stainless Steel Wire | Spring Wire Coils | Cold Drawn Wire | Precision Spring Wire | Straightened Wire | Cut Length Wire | Custom Diameter Wire Available Grades: X10CrNi18-8 | X5CrNi18-10 | X7CrNiAl17-7 Chemical Composition (X10CrNi18-8 Example): • Carbon (C): Max. 0.10% • Silicon (Si): Max. 1.00% • Manganese (Mn): Max. 2.00% • Phosphorus (P): Max. 0.045% • Sulfur (S): Max. 0.015% • Chromium (Cr): 17.0–19.0% • Nickel (Ni): 7.5–9.5% • Nitrogen (N): Max. 0.10% Mechanical Properties: • X10CrNi18-8: Tensile Strength according to wire diameter and delivery condition • X5CrNi18-10: Tensile Strength according to wire diameter and delivery condition • X7CrNiAl17-7: Tensile Strength according to wire diameter and heat-treatment condition Key Features: • High tensile strength • Excellent spring properties • Good fatigue resistance • Excellent corrosion resistance • Good dimensional stability • Smooth and consistent surface finish • Suitable for precision spring manufacturing • Good resistance to demanding industrial environments • Available in different wire diameters Material Characteristics: EN 10270-3 stainless steel spring wire combines the elastic properties required for spring manufacturing with the corrosion resistance of stainless steel. Austenitic grades provide excellent corrosion resistance and ductility, while precipitation-hardening grades can provide higher strength after suitable heat treatment. Applications: • Compression Springs • Extension Springs • Torsion Springs • Precision Springs • Automotive Components • Electrical Components • Instrumentation • Industrial Machinery • Medical Equipment • Chemical Processing Equipment • Corrosion-Resistant Spring Components Conclusion: EN 10270-3 Stainless Steel Spring Wire provides high-strength and corrosion-resistant wire solutions for precision spring and engineering applications. The available stainless steel grades can be selected according to strength, corrosion resistance, spring performance, and operating conditions. To place an order or make an enquiry for EN 10270-3 Stainless Steel Spring Wire, contact Ladhani Metal Corporation for your required grade, diameter, finish, and specification. #EN10270.3 #EN10270.3SteelWire #EN10270.3SpringWire #EN10270.3StainlessSteelWire #EN10270.3Wire #StainlessSteelSpringWire #StainlessSpringWire #SpringSteelWire #StainlessSteelWire #ColdDrawnWire #SpringWireSupplier #SpringWireManufacturer #SpringWireExporter #StainlessSteelWireSupplier #StainlessSteelWireManufacturer #StainlessSteelWireExporter #HighStrengthWire #CorrosionResistantWire #PrecisionWire #IndustrialSpringWire #MechanicalSpringWire #EuropeanSteelStandard #ENSteelStandard #IndustrialSteelWire #SteelWireSupplier #SteelWireManufacturer #SteelWireExporter #SteelWireIndia #LadhaniMetals #SpringWireSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur

EN 10222 specifies steel forgings for pressure purposes. The standard covers forged steel components manufactured from non-alloy and alloy steels for use in pressure equipment. These forgings are selected for their mechanical strength, toughness, pressure resistance, and suitability for demanding industrial service conditions. Manufactured in accordance with EN 10222, the forgings are covered by requirements for chemical composition, mechanical properties, heat treatment, testing, inspection, dimensions, and surface condition. The EN 10222 series is divided into different parts according to the type of steel and required service properties. Ladhani Metal Corporation supplies EN 10222 steel forgings in various shapes, sizes, grades, and dimensions for pressure equipment and heavy engineering requirements. Parts Covered: • EN 10222-1 – Open Die Forgings of Carbon and Carbon-Manganese Steels • EN 10222-2 – Ferritic and Martensitic Steels with Specified Elevated Temperature Properties • EN 10222-3 – Nickel Steels with Specified Toughness Properties • EN 10222-4 – Weldable Fine Grain Steels with High Yield Strength • EN 10222-5 – Martensitic, Austenitic and Austenitic-Ferritic Stainless Steels Forms of Supply: • Forged Rings | Forged Discs | Forged Blocks | Forged Bars | Forged Flanges | Forged Nozzles | Forged Components | Open Die Forgings | Pressure Vessel Forgings | Custom Forgings Available Grades: • EN 10222-1: C22.8 | P250GH | P280GH • EN 10222-2: 16Mo3 | 13CrMo4-5 | 10CrMo5-5 | 11CrMo9-10 | 12CrMo9-10 • EN 10222-3: 12Ni14 | 14Ni6 | 16Ni6 • EN 10222-4: P275NH | P355NH | P460NH | P620QH | P690QH • EN 10222-5: X5CrNi18-10 | X2CrNi18-9 | X5CrNiMo17-12-2 | X2CrNiMo17-12-2 | X6CrNiMoTi17-12-2 | X2CrNiMoN17-13-3 | X6CrNiTi18-10 Steel Types: • EN 10222-1 – Carbon and Carbon-Manganese Steel • EN 10222-2 – Ferritic and Martensitic Alloy Steel • EN 10222-3 – Nickel Alloy Steel • EN 10222-4 – Fine Grain High Yield Strength Steel • EN 10222-5 – Stainless Steel Chemical Composition (P250GH Example): • Carbon (C): Max. 0.20% • Silicon (Si): Max. 0.40% • Manganese (Mn): 0.80–1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% • Chromium (Cr): Max. 0.30% • Nickel (Ni): Max. 0.30% • Molybdenum (Mo): Max. 0.10% • Copper (Cu): Max. 0.30% Mechanical Properties: • C22.8: Yield Strength ≥ 185 MPa | Tensile Strength 360–490 MPa • P250GH: Yield Strength ≥ 250 MPa | Tensile Strength 470–590 MPa • P280GH: Yield Strength ≥ 280 MPa | Tensile Strength 530–650 MPa • 16Mo3: Yield Strength ≥ 275 MPa | Tensile Strength 440–590 MPa • 13CrMo4-5: Yield Strength ≥ 280 MPa | Tensile Strength 450–600 MPa • P275NH: Yield Strength ≥ 275 MPa | Tensile Strength 390–550 MPa • P355NH: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • P460NH: Yield Strength ≥ 460 MPa | Tensile Strength 570–720 MPa Key Features: • High mechanical strength • Reliable pressure resistance • Good toughness • Controlled chemical composition • Heat-treated condition • Good dimensional stability • Suitable for elevated-temperature service in applicable grades • Good corrosion resistance in stainless steel grades • Suitable for demanding pressure equipment • Available in various forged forms Material Characteristics: EN 10222 steel forgings provide reliable performance in pressure equipment where forged construction, controlled metallurgical properties, and mechanical strength are important. The different parts of the standard allow selection of carbon, alloy, nickel, fine grain, and stainless steel forgings according to service temperature, toughness, strength, and corrosion-resistance requirements. Applications: • Pressure Vessels • Boilers • Power Generation Equipment • Petrochemical Equipment • Refinery Equipment • Heat Exchanger Components • Pressure Equipment • Industrial Piping Components • Valves and Pressure Components • Heavy Engineering Equipment Conclusion: EN 10222 Steel Forgings for Pressure Purposes provide forged material solutions for demanding pressure equipment and industrial applications. Parts EN 10222-1 through EN 10222-5 cover carbon, alloy, nickel, fine grain, and stainless steel forgings with different mechanical, toughness, temperature, and corrosion-resistance characteristics. #EN10222 #EN10222Steel #EN10222Forgings #EN10222SteelForgings #PressurePurposeForgings #SteelForgings #AlloySteelForgings #CarbonSteelForgings #StainlessSteelForgings #PressureVesselForgings #PressureEquipmentForgings #ForgedSteelComponents #IndustrialForgings #EngineeringForgings #SteelForgingSupplier #SteelForgingManufacturer #ForgedSteelSupplier #ForgedSteelExporter #PressureForgings #HeavyForgings #CustomSteelForgings #EuropeanSteelStandard #ENSteelStandard #IndustrialSteelProducts #SteelForgingsIndia #ForgingsIndia #PressureVesselSteel #AlloySteelForgingsSupplier #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore

EN 10217 specifies welded steel tubes for pressure purposes. The series is divided into six parts covering non-alloy, alloy, and stainless steel tubes with different requirements for room-temperature properties, elevated-temperature properties, and low-temperature properties. Manufactured in accordance with EN 10217, these welded tubes are supplied with specified requirements for chemical composition, mechanical properties, testing, inspection, dimensions, tolerances, and weld quality. The six parts cover different steel types and service conditions. Ladhani Metal Corporation supplies EN 10217 welded steel tubes in various outside diameters, wall thicknesses, lengths, and finishes for pressure equipment, industrial piping, heat exchangers, boilers, and other engineering requirements. Parts Covered: • EN 10217-1 – Non-Alloy Steel Tubes with Specified Room Temperature Properties • EN 10217-2 – Electric Welded Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties • EN 10217-3 – Alloy Fine Grain Steel Tubes with Specified Room Temperature Properties • EN 10217-4 – Electric Welded Non-Alloy Steel Tubes with Specified Low Temperature Properties • EN 10217-5 – Submerged Arc Welded Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties • EN 10217-6 – Submerged Arc Welded Non-Alloy Steel Tubes with Specified Low Temperature Properties Forms of Supply: • Welded Steel Tubes | Electric Welded Tubes | Submerged Arc Welded Tubes | Pressure Tubes | Boiler Tubes | Heat Exchanger Tubes | Fine Grain Steel Tubes | Alloy Steel Tubes | Low-Temperature Tubes | High-Temperature Tubes | Cut-to-Length Tubes Available Grades by Part: • EN 10217-1: P195TR1 | P195TR2 | P235TR1 | P235TR2 | P265TR1 | P265TR2 • EN 10217-2: P195GH | P235GH | P265GH | 16Mo3 | 8CrMo5-4 | 10CrMo5-5 | 13CrMo4-5 | 10CrMo9-10 | 11CrMo9-10 • EN 10217-3: P275N | P355N | P460N • EN 10217-4: P215NL | P255QL | P265NL | P275NL | P355NL | P460NL • EN 10217-5: P235GH | P265GH | 16Mo3 | 13CrMo4-5 | 10CrMo5-5 | 10CrMo9-10 | 11CrMo9-10 • EN 10217-6: P215NL | P255QL | P265NL | P275NL | P355NL | P460NL Steel Types: • EN 10217-1 – Non-Alloy Pressure Steel • EN 10217-2 – Non-Alloy and Alloy Pressure Steel • EN 10217-3 – Fine Grain Alloy Steel • EN 10217-4 – Non-Alloy Low-Temperature Pressure Steel • EN 10217-5 – Non-Alloy and Alloy High-Temperature Pressure Steel • EN 10217-6 – Non-Alloy Low-Temperature Pressure Steel Chemical Composition (P235GH Example): • Carbon (C): Max. 0.16% • Silicon (Si): Max. 0.35% • Manganese (Mn): 0.30–0.70% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% • Chromium (Cr): Max. 0.30% • Nickel (Ni): Max. 0.30% • Molybdenum (Mo): Max. 0.10% • Copper (Cu): Max. 0.30% Mechanical Properties: • P195TR1 | P195TR2: Yield Strength ≥ 195 MPa | Tensile Strength 320–440 MPa • P235TR1 | P235TR2: Yield Strength ≥ 235 MPa | Tensile Strength 360–500 MPa • P265TR1 | P265TR2: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa • P235GH: Yield Strength ≥ 235 MPa | Tensile Strength 360–500 MPa • P265GH: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa • 16Mo3: Yield Strength ≥ 275 MPa | Tensile Strength 440–590 MPa • P275N: Yield Strength ≥ 275 MPa | Tensile Strength 390–550 MPa • P355N: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • P460N: Yield Strength ≥ 460 MPa | Tensile Strength 570–720 MPa • P215NL: Yield Strength ≥ 215 MPa | Tensile Strength 360–480 MPa • P265NL: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa • P355NL: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • P460NL: Yield Strength ≥ 460 MPa | Tensile Strength 570–720 MPa Key Features: • Welded construction • Controlled weld quality • Reliable pressure resistance • Good dimensional accuracy • Available in electric welded and submerged arc welded forms • Suitable for room-temperature service • Suitable for elevated-temperature service • Suitable for low-temperature service • Good mechanical strength • Available in non-alloy and alloy steel grades Conclusion: EN 10217 Welded Steel Tubes provide a comprehensive range of pressure-service tubes through Parts 1 to 6. For more details contact Ladhani Metal Corporation. #EN10217 #EN10217WeldedTubes #EN10217SteelTubes #EN10217WeldedSteelTubes #WeldedSteelTubes #WeldedSteelPipe #PressurePurposeTubes #PressureSteelTubes #NonAlloySteelTubes #AlloySteelTubes #StainlessSteelTubes #WeldedPressureTubes #SteelPressurePipes #IndustrialSteelTubes #EngineeringSteelTubes #HeatExchangerTubes #BoilerTubes #SteelTubeSupplier #SteelTubeManufacturer #WeldedTubeSupplier #WeldedPipeSupplier #SteelTubeExporter #EuropeanSteelStandard #ENSteelStandard #SteelPipeSupplier #SteelPipeManufacturer #IndustrialSteelProducts #SteelTubesIndia #LadhaniMetals #WeldedSteelSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur

EN 10216-4 specifies seamless steel tubes made of non-alloy and alloy steels for pressure purposes, with specified low-temperature properties. These tubes are designed for applications where pressure resistance, mechanical strength, toughness, and reliable performance at low temperatures are required. Manufactured in accordance with EN 10216-4, these seamless pressure tubes are supplied with specified requirements for chemical composition, mechanical properties, impact toughness, heat treatment, testing, inspection, dimensions, and tolerances. The grades are selected according to the required pressure-service and low-temperature conditions. Ladhani Metal Corporation supplies EN 10216-4 seamless steel tubes in various outside diameters, wall thicknesses, lengths, and finishes to meet demanding industrial and engineering requirements. Forms of Supply: • Seamless Steel Tubes | Pressure Tubes | Low-Temperature Tubes | Boiler Tubes | Heat Exchanger Tubes | Alloy Steel Tubes | Hot-Finished Tubes | Cold-Drawn Tubes | Precision Tubes | Cut-to-Length Tubes Available Grades: P215NL | P255QL | P265NL | P275NL | P355NL | P460NL Steel Types: • P215NL | P265NL | P275NL | P355NL – Fine Grain Non-Alloy Pressure Steel • P255QL | P460NL – Fine Grain Alloy Pressure Steel Chemical Composition (P355NL Example): • Carbon (C): Max. 0.18% • Silicon (Si): Max. 0.40% • Manganese (Mn): Max. 1.60% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.010% • Chromium (Cr): Max. 0.30% • Nickel (Ni): Max. 0.50% • Molybdenum (Mo): Max. 0.10% • Copper (Cu): Max. 0.30% • Niobium (Nb): Max. 0.05% • Vanadium (V): Max. 0.10% • Titanium (Ti): Max. 0.05% Mechanical Properties: • P215NL: Yield Strength ≥ 215 MPa | Tensile Strength 360–480 MPa • P255QL: Yield Strength ≥ 255 MPa | Tensile Strength 410–550 MPa • P265NL: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa • P275NL: Yield Strength ≥ 275 MPa | Tensile Strength 390–550 MPa • P355NL: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • P460NL: Yield Strength ≥ 460 MPa | Tensile Strength 570–720 MPa Key Features: • Seamless construction • Excellent low-temperature toughness • Reliable pressure resistance • Good mechanical strength • Fine grain structure • Controlled chemical composition • Good weldability with appropriate procedures • Suitable for demanding low-temperature service • Available in different sizes and wall thicknesses Material Characteristics: EN 10216-4 seamless steel tubes are designed to maintain reliable mechanical performance under low-temperature service conditions. Their controlled fine-grain structure and specified impact toughness help provide dependable performance in pressure systems exposed to demanding temperature conditions. Applications: • Low-Temperature Pressure Systems • Cryogenic and Refrigeration Equipment • Pressure Vessels • Power Generation Equipment • Heat Exchangers • Petrochemical Equipment • Industrial Piping • Process Equipment • Energy Systems • Heavy Engineering Conclusion: EN 10216-4 Seamless Steel Tubes provide reliable pressure-service solutions where low-temperature toughness and mechanical strength are important. These tubes combine seamless construction, controlled metallurgical properties, and specified impact performance for demanding industrial, energy, petrochemical, and engineering applications. #EN10216.4 #EN10216.4Steel #EN10216.4SeamlessTubes #EN10216.4SteelTubes #SeamlessSteelTubes #NonAlloySteelTubes #AlloySteelTubes #PressurePurposeTubes #PressureSteelTubes #LowTemperatureSteelTubes #CarbonSteelTubes #AlloySteelPipe #SeamlessSteelPipe #PressureTubes #IndustrialSteelTubes #EngineeringSteelTubes #SteelTubeSupplier #SteelTubeManufacturer #SeamlessTubeSupplier #SeamlessPipeSupplier #SteelTubeExporter #EuropeanSteelStandard #ENSteelStandard #SteelPipeSupplier #SteelPipeManufacturer #IndustrialSteelProducts #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur

EN 10216-3 specifies seamless steel tubes made of fine grain alloy steels for pressure purposes. These tubes are designed for applications requiring high mechanical strength, good toughness, reliable pressure resistance, and controlled performance under demanding service conditions. Manufactured in accordance with EN 10216-3, these seamless pressure tubes are supplied with specified requirements for chemical composition, mechanical properties, heat treatment, testing, inspection, dimensions, and tolerances. The fine grain structure provides a combination of strength and toughness suitable for demanding pressure equipment and industrial systems. Ladhani Metal Corporation supplies EN 10216-3 seamless steel tubes in various outside diameters, wall thicknesses, lengths, and finishes to meet industrial and engineering requirements. Forms of Supply: • Seamless Steel Tubes | Pressure Tubes | Fine Grain Steel Tubes | Alloy Steel Tubes | Boiler Tubes | Heat Exchanger Tubes | High-Pressure Tubes | Hot-Finished Tubes | Cold-Drawn Tubes | Cut-to-Length Tubes Available Grades: 7Mn6 | 13MnNi6-3 | 10MnVNb6-3 | 15NiCuMoNb5-6-4 | 20MnNb6 | 16Mo3 | 8CrMoNiV18-8 | 10CrMo5-5 | 12CrMo9-10 Steel Types: • 7Mn6 | 13MnNi6-3 | 10MnVNb6-3 | 20MnNb6 – Fine Grain Alloy Steel • 15NiCuMoNb5-6-4 – Nickel-Copper-Molybdenum-Niobium Alloy Steel • 16Mo3 – Molybdenum Alloy Steel • 8CrMoNiV18-8 | 10CrMo5-5 | 12CrMo9-10 – Chromium-Molybdenum Alloy Steel Chemical Composition (13MnNi6-3 Example): • Carbon (C): Max. 0.17% • Silicon (Si): Max. 0.40% • Manganese (Mn): 1.00–1.70% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.010% • Chromium (Cr): Max. 0.30% • Nickel (Ni): 1.30–1.70% • Molybdenum (Mo): Max. 0.10% • Copper (Cu): Max. 0.30% • Niobium (Nb): Max. 0.05% • Vanadium (V): Max. 0.10% Mechanical Properties: • 7Mn6: Yield Strength ≥ 315 MPa | Tensile Strength 470–650 MPa • 13MnNi6-3: Yield Strength ≥ 390 MPa | Tensile Strength 540–720 MPa • 10MnVNb6-3: Yield Strength ≥ 420 MPa | Tensile Strength 570–740 MPa • 15NiCuMoNb5-6-4: Yield Strength ≥ 460 MPa | Tensile Strength 610–780 MPa • 20MnNb6: Yield Strength ≥ 460 MPa | Tensile Strength 610–780 MPa Key Features: • Seamless construction • Fine grain structure • High mechanical strength • Good toughness • Reliable pressure resistance • Controlled chemical composition • Good weldability with suitable procedures • Excellent performance in demanding service conditions • Available in different sizes and wall thicknesses Material Characteristics: EN 10216-3 seamless tubes are manufactured from fine grain alloy steels designed to provide a balanced combination of strength and toughness. Alloying elements such as manganese, nickel, molybdenum, niobium, and vanadium contribute to the required mechanical performance. These characteristics make the tubes suitable for pressure equipment and demanding industrial systems. Applications: • Pressure Equipment • Power Generation Plants • Boilers and Steam Systems • Heat Exchangers • Petrochemical Equipment • Refinery Systems • Industrial Pressure Piping • Process Equipment • Energy Equipment • Heavy Engineering Systems Conclusion: EN 10216-3 Seamless Steel Tubes provide high-strength and fine grain alloy steel solutions for demanding pressure applications. Their combination of mechanical strength, toughness, seamless construction, and controlled metallurgical properties makes them suitable for pressure equipment, power generation, petrochemical, energy, and heavy engineering applications. #EN10216.3 #EN10216.3Steel #EN10216.3SeamlessTubes #EN10216.3SteelTubes #SeamlessSteelTubes #FineGrainSteelTubes #AlloySteelTubes #PressurePurposeTubes #PressureSteelTubes #LowTemperatureSteelTubes #CarbonSteelTubes #AlloySteelPipe #SeamlessSteelPipe #PressureTubes #IndustrialSteelTubes #EngineeringSteelTubes #SteelTubeSupplier #SteelTubeManufacturer #SeamlessTubeSupplier #SeamlessPipeSupplier #SteelTubeExporter #EuropeanSteelStandard #ENSteelStandard #SteelPipeSupplier #SteelPipeManufacturer #IndustrialSteelProducts #SteelTubesIndia #PressurePipe #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah

EN 10216-2 specifies seamless steel tubes made of non-alloy and alloy steels for pressure purposes, with specified elevated-temperature properties. These tubes are designed for applications requiring reliable pressure resistance, mechanical strength, controlled chemical composition, and performance at elevated temperatures. Manufactured in accordance with EN 10216-2, these seamless pressure tubes are supplied in grades covering non-alloy quality steels and alloy steels with additions of elements such as chromium and molybdenum. The standard specifies requirements for chemical composition, mechanical properties, testing, inspection, dimensions, and elevated-temperature performance. Ladhani Metal Corporation supplies EN 10216-2 seamless steel tubes in various outside diameters, wall thicknesses, lengths, and finishes for demanding industrial and engineering requirements. Forms of Supply: • Seamless Steel Tubes | Pressure Tubes | Boiler Tubes | Heat Exchanger Tubes | High-Temperature Tubes | Hot-Finished Tubes | Cold-Drawn Tubes | Precision Tubes | Cut-to-Length Tubes | Custom Size Tubes Available Grades: P195GH | P235GH | P265GH | 16Mo3 | 13CrMo4-5 | 10CrMo5-5 | 12CrMo9-10 | 14CrMo4-5 | 10CrMo9-10 | 11CrMo9-10 | 10CrWMo5-5 | 12CrMoV12-10 | 14MoV6-3 Steel Types: • P195GH | P235GH | P265GH – Non-Alloy Pressure Steel • 16Mo3 – Molybdenum Alloy Pressure Steel • 13CrMo4-5 | 10CrMo5-5 | 12CrMo9-10 | 14CrMo4-5 | 10CrMo9-10 | 11CrMo9-10 – Chromium-Molybdenum Alloy Steel • 10CrWMo5-5 | 12CrMoV12-10 | 14MoV6-3 – Alloy Pressure Steel Chemical Composition (16Mo3 Example): • Carbon (C): Max. 0.20% • Silicon (Si): Max. 0.35% • Manganese (Mn): 0.40–0.90% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.010% • Chromium (Cr): Max. 0.30% • Molybdenum (Mo): 0.25–0.35% • Nickel (Ni): Max. 0.30% • Copper (Cu): Max. 0.30% Mechanical Properties: • P195GH: Yield Strength ≥ 195 MPa | Tensile Strength 320–440 MPa • P235GH: Yield Strength ≥ 235 MPa | Tensile Strength 360–500 MPa • P265GH: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa • 16Mo3: Yield Strength ≥ 275 MPa | Tensile Strength 440–590 MPa • 13CrMo4-5: Yield Strength ≥ 280 MPa | Tensile Strength 450–600 MPa • 10CrMo5-5: Yield Strength ≥ 280 MPa | Tensile Strength 450–600 MPa • 12CrMo9-10: Yield Strength ≥ 280 MPa | Tensile Strength 450–600 MPa • 11CrMo9-10: Yield Strength ≥ 280 MPa | Tensile Strength 450–600 MPa Key Features: • Seamless construction • High pressure resistance • Good elevated-temperature performance • Excellent mechanical strength • Controlled chemical composition • Good creep resistance in suitable alloy grades • Good weldability with appropriate procedures • Suitable for high-temperature industrial service • Available in different sizes and wall thicknesses Material Characteristics: EN 10216-2 seamless tubes combine pressure resistance with controlled elevated-temperature mechanical properties. Non-alloy grades are commonly selected for general pressure applications, while chromium-molybdenum alloy grades provide enhanced performance for higher-temperature and demanding service conditions. Applications: • Power Generation Plants • Boilers and Steam Systems • Heat Exchangers • Pressure Vessels • Petrochemical Plants • Refinery Equipment • High-Temperature Piping • Process Equipment • Industrial Heating Systems • Energy and Engineering Equipment Conclusion: EN 10216-2 Seamless Steel Tubes provide reliable solutions for pressure applications involving elevated temperatures. The standard includes non-alloy grades such as P195GH, P235GH, and P265GH together with alloy grades such as 16Mo3 and chromium-molybdenum steels. These tubes are suitable for demanding boiler, power generation, petrochemical, heat exchanger, and industrial pressure-service applications. #EN10216.2 #EN10216.2Steel #EN10216.2SeamlessTubes #EN10216.2SteelTubes #SeamlessSteelTubes #SeamlessSteelPipe #AlloySteelTubes #NonAlloySteelTubes #PressurePurposeTubes #PressureSteelTubes #BoilerTubes #HeatExchangerTubes #CarbonSteelTubes #AlloySteelPipe #PressureTubes #IndustrialSteelTubes #EngineeringSteelTubes #SteelTubeSupplier #SteelTubeManufacturer #SeamlessTubeSupplier #SeamlessPipeSupplier #SteelTubeExporter #EuropeanSteelStandard #ENSteelStandard #SteelPipeSupplier #SteelPipeManufacturer #IndustrialSteelProducts #SteelTubesIndia #LadhaniMetals #SeamlessSteelSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai

EN 10216-1 specifies seamless steel tubes made of non-alloy steel for pressure purposes. These tubes are intended for applications where pressure resistance, dimensional accuracy, mechanical strength, and reliable service performance are required. The standard covers tubes in grades such as P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, and P265TR2. Manufactured in accordance with EN 10216-1, these seamless pressure tubes are supplied with specified requirements for chemical composition, mechanical properties, impact testing, inspection, and dimensional tolerances. The TR1 and TR2 quality classes provide different levels of testing and impact toughness requirements. Ladhani Metal Corporation supplies EN 10216-1 seamless steel tubes in various outside diameters, wall thicknesses, lengths, and finishes for industrial and pressure-service requirements. Forms of Supply: • Seamless Steel Tubes | Pressure Tubes | Boiler Tubes | Heat Exchanger Tubes | High-Pressure Tubes | Hot-Finished Tubes | Cold-Drawn Tubes | Precision Tubes | Cut-to-Length Tubes Available Grades: P195TR1 | P195TR2 | P235TR1 | P235TR2 | P265TR1 | P265TR2 Steel Types: • P195TR1 | P195TR2 – Non-Alloy Pressure Steel • P235TR1 | P235TR2 – Non-Alloy Pressure Steel • P265TR1 | P265TR2 – Non-Alloy Pressure Steel Chemical Composition (P235TR2 Example): • Carbon (C): Max. 0.16% • Silicon (Si): Max. 0.35% • Manganese (Mn): 0.30–0.70% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.025% • Chromium (Cr): Max. 0.30% • Copper (Cu): Max. 0.30% • Molybdenum (Mo): Max. 0.10% • Nickel (Ni): Max. 0.30% Mechanical Properties: • P195TR1: Yield Strength ≥ 195 MPa | Tensile Strength 320–440 MPa • P195TR2: Yield Strength ≥ 195 MPa | Tensile Strength 320–440 MPa • P235TR1: Yield Strength ≥ 235 MPa | Tensile Strength 360–500 MPa • P235TR2: Yield Strength ≥ 235 MPa | Tensile Strength 360–500 MPa • P265TR1: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa • P265TR2: Yield Strength ≥ 265 MPa | Tensile Strength 410–570 MPa Key Features: • Seamless construction • Good pressure resistance • Reliable mechanical strength • Good dimensional accuracy • Suitable for elevated-temperature service • Good weldability with appropriate procedures • Available in hot-finished and cold-drawn conditions • Suitable for demanding industrial environments Material Characteristics: EN 10216-1 seamless steel tubes are produced from non-alloy steels and are designed for pressure applications. Their seamless construction provides uniformity and dependable performance under internal pressure. The different TR1 and TR2 quality classes allow selection according to inspection, testing, and toughness requirements. Applications: • Boiler Systems • Pressure Vessels • Heat Exchangers • Steam Systems • Power Generation Equipment • Industrial Piping • Petrochemical Equipment • Process Equipment • Pressure Service Systems • General Engineering Conclusion: EN 10216-1 Seamless Steel Tubes provide dependable performance for pressure-service applications requiring controlled chemical composition, mechanical strength, and reliable tube quality. Grades P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, and P265TR2 are widely used for industrial pressure systems, boiler equipment, heat exchangers, and related engineering applications. #EN10216.1 #EN10216.1Steel #EN10216.1SeamlessTubes #EN10216.1SteelTubes #SeamlessSteelTubes #SeamlessSteelPipe #NonAlloySteelTubes #PressurePurposeTubes #PressureSteelTubes #BoilerTubes #HeatExchangerTubes #CarbonSteelTubes #CarbonSteelPipe #SteelTubesSupplier #SteelTubeManufacturer #SeamlessTubeSupplier #SeamlessPipeSupplier #SteelTubeExporter #PressureTubes #IndustrialSteelTubes #EngineeringSteelTubes #EuropeanSteelStandard #ENSteelStandard #SteelPipeSupplier #SteelPipeManufacturer #IndustrialSteelProducts #SteelTubesIndia #SteelPipeIndia #LadhaniMetals #SeamlessSteelSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh

EN 10155 specifies structural steels with improved atmospheric corrosion resistance, commonly known as weathering steels. These steels are alloyed to develop a protective oxide layer when exposed to suitable atmospheric conditions, helping to reduce corrosion and maintenance requirements. EN 10155 covers structural steel sheet, plate, and strip in grades such as S235J0W, S235J2W, S355J0WP, S355J2WP, S355J0W, S355J2G1W, S355J2G2W, S355K2G1W, and S355K2G2W. Manufactured in accordance with EN 10155, these weather-resistant structural steels provide a combination of structural strength, atmospheric corrosion resistance, toughness, and durability. They are available in different product forms and grades according to the required mechanical and service conditions. Ladhani Metal Corporation supplies EN 10155 structural steel sheet, plate, and strip in various sizes, thicknesses, widths, and lengths to meet industrial and structural requirements. Forms of Supply: • Structural Steel Sheets | Structural Steel Plates | Steel Strips | Weathering Steel Plates | Weather-Resistant Steel Sheets | Hot-Rolled Plates | Hot-Rolled Sheets | Cut-to-Length Plates | Custom Width Strips Available Grades: S235J0W | S235J2W | S355J0WP | S355J2WP | S355J0W | S355J2G1W | S355J2G2W | S355K2G1W | S355K2G2W Steel Types: • S235J0W | S235J2W – Weathering Structural Steel • S355J0WP | S355J2WP – Weathering Structural Steel • S355J0W | S355J2G1W | S355J2G2W | S355K2G1W | S355K2G2W – Weathering Structural Steel Chemical Composition (S355J2G2W Example): • Carbon (C): Max. 0.16% • Silicon (Si): Max. 0.50% • Manganese (Mn): 0.50–1.50% • Phosphorus (P): Max. 0.035% • Sulfur (S): Max. 0.035% • Chromium (Cr): 0.40–0.80% • Copper (Cu): 0.25–0.55% • Nickel (Ni): Max. 0.65% • Molybdenum (Mo): Max. 0.40% Mechanical Properties: • S235J0W: Yield Strength ≥ 235 MPa | Tensile Strength 360–510 MPa • S235J2W: Yield Strength ≥ 235 MPa | Tensile Strength 360–510 MPa • S355J0WP: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • S355J2WP: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • S355J0W: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • S355J2G1W: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • S355J2G2W: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • S355K2G1W: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa • S355K2G2W: Yield Strength ≥ 355 MPa | Tensile Strength 490–630 MPa Key Features: • Improved atmospheric corrosion resistance • Protective patina formation under suitable exposure conditions • Good structural strength • Good toughness • Suitable for outdoor structural environments • Reduced dependence on conventional protective coatings in appropriate conditions • Good durability and service performance • Available in sheet, plate, and strip forms Material Characteristics: EN 10155 weathering steels contain controlled alloying elements that promote the development of a stable protective patina when exposed to alternating wet and dry atmospheric conditions. This patina can slow further corrosion and provide long-term weather resistance. The material combines structural strength with improved resistance to atmospheric corrosion, making it suitable for exposed steel structures. Applications: • Bridges and Bridge Components • Structural Buildings • Railway Structures • Outdoor Steel Structures • Industrial Structures • Transmission Towers • Heavy Engineering • Storage and Transportation Structures • Architectural Structures • Infrastructure Projects Conclusion: EN 10155 Structural Steels Sheet, Plate & Strip provide a practical combination of structural strength and improved atmospheric corrosion resistance. Grades S235J0W, S235J2W, S355J0WP, S355J2WP, S355J0W, S355J2G1W, S355J2G2W, S355K2G1W, and S355K2G2W are suitable for demanding outdoor and structural environments where durability and weather resistance are important. #EN10155 #EN10155Steel #EN10155StructuralSteel #EN10155WeatheringSteel #WeatheringSteel #AtmosphericCorrosionResistantSteel #CorrosionResistantSteel #StructuralSteelPlate #WeatheringSteelPlate #WeatheringSteelSheet #WeatheringSteelStrip #HighStrengthSteel #AlloySteelPlate #StructuralSteelPlateSupplier #WeatheringSteelSupplier #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #CorrosionResistantSteelSupplier #WeatherResistantSteel #CortenSteel #CortenSteelPlate #IndustrialSteel #ConstructionSteel #BridgeSteel #OffshoreSteel #SteelFabrication #EuropeanSteelStandard #LadhaniMetals #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai

EN 10137-2 specifies high yield strength structural steel plates and wide flats supplied in the quenched and tempered condition. These steels are designed for demanding structural applications where high strength, toughness, dimensional stability, and reduced structural weight are required. The standard covers grades such as S690Q, S690QL, S690QL1, S890Q, S890QL, S960Q, and S960QL. Manufactured in accordance with EN 10137-2, these high strength structural steel plates and wide flats are available in different strength and toughness classes. The Q grades are quenched and tempered, while the L and L1 designations indicate enhanced impact toughness requirements at specified low temperatures. Ladhani Metal Corporation supplies EN 10137-2 structural steel plates and wide flats in various thicknesses, widths, and lengths to meet demanding industrial and structural requirements. Forms of Supply: • Structural Steel Plates | Wide Flats | Quenched & Tempered Plates | High Yield Strength Steel Plates | Heavy Structural Plates | Cut-to-Length Plates | Custom Width Plates | Custom Fabricated Plates Available Grades: S690Q | S690QL | S690QL1 | S890Q | S890QL | S960Q | S960QL Steel Types: • S690Q | S690QL | S690QL1 – High Yield Strength Quenched & Tempered Structural Steel • S890Q | S890QL – Ultra High Strength Quenched & Tempered Structural Steel • S960Q | S960QL – Very High Strength Quenched & Tempered Structural Steel Chemical Composition (S690Q Example): • Carbon (C): Max. 0.20% • Silicon (Si): Max. 0.80% • Manganese (Mn): Max. 1.70% • Phosphorus (P): Max. 0.025% • Sulfur (S): Max. 0.015% • Chromium (Cr): Max. 1.50% • Nickel (Ni): Max. 2.00% • Molybdenum (Mo): Max. 0.70% • Copper (Cu): Max. 0.50% • Vanadium (V): Max. 0.12% • Niobium (Nb): Max. 0.06% • Titanium (Ti): Max. 0.05% Mechanical Properties: • S690Q: Yield Strength ≥ 690 MPa | Tensile Strength 770–940 MPa • S690QL: Yield Strength ≥ 690 MPa | Tensile Strength 770–940 MPa • S690QL1: Yield Strength ≥ 690 MPa | Tensile Strength 770–940 MPa • S890Q: Yield Strength ≥ 890 MPa | Tensile Strength 940–1100 MPa • S890QL: Yield Strength ≥ 890 MPa | Tensile Strength 940–1100 MPa • S960Q: Yield Strength ≥ 960 MPa | Tensile Strength 980–1150 MPa • S960QL: Yield Strength ≥ 960 MPa | Tensile Strength 980–1150 MPa Key Features: • Very high yield strength • Excellent strength-to-weight ratio • Quenched and tempered condition • Good low-temperature toughness • High resistance to structural deformation • Suitable for heavy-duty structural fabrication • Supports weight reduction in engineered structures • Good weldability when appropriate welding procedures are followed Material Characteristics: EN 10137-2 steels combine high yield strength with controlled toughness and good structural performance. Their quenched and tempered condition provides a strong and refined microstructure, allowing thinner sections to achieve high load-bearing capacity. The S690, S890, and S960 grades are particularly suitable where strength and reduced component weight are important design considerations. Applications: • Heavy Engineering Structures • Cranes and Lifting Equipment • Bridges and Infrastructure • Pressure and Load-Bearing Structures • Mining Equipment • Construction Machinery • Transportation Equipment • Heavy-Duty Fabrication • Structural Frames • Mobile and Industrial Equipment Conclusion: EN 10137-2 Structural Steel Plates & Wide Flats provide high-strength material solutions for demanding structural applications. Grades S690Q, S690QL, S690QL1, S890Q, S890QL, S960Q, and S960QL offer progressively higher strength levels while maintaining controlled toughness and structural reliability. These steels are well suited for applications requiring high load capacity, reduced structural weight, and dependable performance. #EN10137 #EN10137Steel #EN10137SteelPlate #EN10137HighYieldStrengthSteel #EN10137StructuralSteel #HighYieldStrengthSteelPlate #HighStrengthSteelPlate #QuenchedAndTemperedSteel #NormalizedSteelPlate #StructuralSteelPlate #FineGrainSteelPlate #AlloySteelPlate #HeavySteelPlate #EngineeringSteelPlate #IndustrialSteelPlate #PressureEquipmentSteel #ConstructionSteelPlate #BridgeSteelPlate #OffshoreSteelPlate #WeldableSteelPlate #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #HighStrengthSteelSupplier #StructuralSteelSupplier #EuropeanSteelStandard #IndustrialSteelProducts #SteelFabrication #LadhaniMetals #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur

EN 10151 Stainless Steel Strip are high-quality cold rolled stainless steel strips designed for spring applications requiring excellent corrosion resistance, strength, elasticity, fatigue resistance, dimensional accuracy, and superior surface quality. These stainless steel strips are available in austenitic, precipitation-hardening, ferritic/martensitic, and high-carbon martensitic stainless steel grades for demanding industrial and precision applications. Manufactured in accordance with EN 10151 specification, these stainless steel strips are produced with controlled chemical composition, mechanical properties, dimensional tolerances, surface quality, and delivery conditions to ensure reliable performance in spring and engineering applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10151 Stainless Steel Strip, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Stainless Steel Strip | Cold Rolled Stainless Steel Strip | Spring Steel Strip | Precision Stainless Steel Strip | Stainless Steel Coil Strip | Slit Stainless Steel Strip | Hardened & Tempered Strip | Annealed Stainless Steel Strip | Narrow Stainless Steel Strip | Custom Width Strip Available Grades (EN 10151): X10CrNi18-8 | X5CrNi18-10 | X2CrNi19-11 | X5CrNiMo17-12-2 | X2CrNiMo17-12-2 | X6CrNiTi18-10 | X7CrNiAl17-7 | X5CrNiCuNb16-4 | X20Cr13 | X30Cr13 | X46Cr13 | X90CrMoV18 Steel Types: X10CrNi18-8 | X5CrNi18-10 | X2CrNi19-11 | X5CrNiMo17-12-2 | X2CrNiMo17-12-2 | X6CrNiTi18-10 – Austenitic Stainless Steel X7CrNiAl17-7 – Precipitation-Hardening Stainless Steel X5CrNiCuNb16-4 – Precipitation-Hardening Stainless Steel X20Cr13 | X30Cr13 | X46Cr13 | X90CrMoV18 – Martensitic Stainless Steel Chemical Composition (X5CrNi18-10 Example): • Carbon (C): Max 0.07% • Silicon (Si): Max 1.00% • Manganese (Mn): Max 2.00% • Phosphorus (P): Max 0.045% • Sulphur (S): Max 0.015% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Nitrogen (N): Max 0.10% Mechanical Properties: • High tensile strength • Excellent corrosion resistance • Good elastic properties • Excellent fatigue resistance • Good ductility and toughness • Superior surface quality • High dimensional accuracy • Mechanical properties vary according to grade, strip thickness, width, and delivery condition Key Features: • Excellent corrosion resistance • High strength and hardness • Superior spring properties • Excellent fatigue resistance • Good elastic recovery • Excellent surface finish • High dimensional accuracy • Good resistance to wear and repeated loading • Suitable for precision applications Material Characteristics: EN 10151 Stainless Steel Strip combines corrosion resistance, mechanical strength, elasticity, fatigue resistance, and dimensional accuracy. Austenitic grades provide excellent corrosion resistance and ductility, precipitation-hardening grades offer high strength after suitable heat treatment, while martensitic grades provide higher hardness, wear resistance, and strength for demanding spring and precision applications. Applications: • Stainless Steel Springs • Coil Springs • Flat Springs • Spring Clips • Disc Springs • Retaining Rings • Circlips • Washers • Automotive Components • Medical Components • Precision Engineering Parts • Industrial Spring Components Conclusion: Ladhani Metal Corporation supplies EN 10151 Stainless Steel Strip in X10CrNi18-8, X5CrNi18-10, X2CrNi19-11, X5CrNiMo17-12-2, X2CrNiMo17-12-2, X6CrNiTi18-10, X7CrNiAl17-7, X5CrNiCuNb16-4, X20Cr13, X30Cr13, X46Cr13, and X90CrMoV18 grades. These stainless steel spring strips are available with customized thicknesses, widths, lengths, finishes, hardness levels, and delivery conditions. They provide excellent corrosion resistance, strength, elasticity, fatigue resistance, surface quality, and dimensional accuracy for springs, clips, retaining components, automotive parts, precision engineering, and industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10151 #EN10151StainlessSteel #EN10151SteelStrip #EN10151StainlessSteelStrip #StainlessSteelStrip #StainlessSteelSpringStrip #SpringSteelStrip #ColdRolledStainlessSteelStrip #PrecisionStainlessSteelStrip #StainlessSteelSpringSteel #AusteniticStainlessSteelStrip #MartensiticStainlessSteelStrip #CorrosionResistantSteelStrip #HeatTreatedStainlessSteelStrip #SpringSteelManufacturer #StainlessSteelStripManufacturer #StainlessSteelStripSupplier #StainlessSteelStripExporter #PrecisionSteelStrip #IndustrialSteelStrip #AutomotiveSteelStrip #SpringApplications #EngineeringSteelStrip #MetalStripSupplier #ColdRolledSteelStrip #EuropeanSteelStandard #StainlessSteelProducts #IndustrialStainlessSteel #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad

EN 10132-4 Cold Rolled Narrow Steel Strip are high-quality spring steels supplied in cold rolled strip form for applications requiring high strength, hardness, elasticity, fatigue resistance, dimensional accuracy, and excellent surface quality. The specification covers carbon spring steels and alloy spring steels used for the manufacture of springs, clips, washers, retaining rings, precision components, and other resilient mechanical parts. Manufactured in accordance with EN 10132-4 specification, these cold rolled narrow steel strips are produced with controlled chemical composition, mechanical properties, dimensional tolerances, surface quality, and delivery conditions to ensure reliable performance in demanding spring and engineering applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10132-4 Cold Rolled Narrow Steel Strip, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Cold Rolled Steel Strip | Narrow Steel Strip | Spring Steel Strip | Carbon Steel Strip | Alloy Spring Steel Strip | Precision Steel Strip | Hardened & Tempered Strip | Annealed Steel Strip | Slit Steel Strip | Custom Width Steel Strip Available Grades (EN 10132-4): C67S | C75S | C85S | C90S | C100S | 51CrV4 | 55Cr3 | 56Si7 | 51CrMoV4 Steel Types: C67S | C75S | C85S | C90S | C100S – Carbon Spring Steel 51CrV4 | 55Cr3 | 56Si7 | 51CrMoV4 – Alloy Spring Steel Chemical Composition (C75S Example): • Carbon (C): 0.70 – 0.80% • Silicon (Si): 0.15 – 0.35% • Manganese (Mn): 0.60 – 0.90% • Phosphorus (P): Max 0.025% • Sulphur (S): Max 0.025% Mechanical Properties: • High tensile strength • High hardness • Excellent spring properties • Good elastic limit • Excellent fatigue resistance • Good wear resistance • High dimensional stability • Mechanical properties vary according to grade, strip thickness, width, and delivery condition Key Features: • Excellent spring characteristics • High strength and hardness • Superior fatigue resistance • Excellent elastic recovery • Good wear resistance • High dimensional accuracy • Excellent surface quality • Suitable for precision components • Reliable performance under repeated loading Material Characteristics: EN 10132-4 Cold Rolled Narrow Steel Strip includes carbon spring steels and alloy spring steels developed for applications requiring high elasticity, strength, hardness, and fatigue resistance. Carbon grades such as C67S, C75S, C85S, C90S, and C100S provide excellent spring properties, while alloy grades such as 51CrV4, 55Cr3, 56Si7, and 51CrMoV4 offer enhanced hardenability, strength, toughness, and resistance to repeated mechanical loading. Applications: • Coil Springs • Leaf Springs • Flat Springs • Disc Springs • Spring Clips • Retaining Rings • Washers • Circlips • Automotive Components • Mechanical Components • Precision Engineering Parts • Industrial Spring Components Conclusion: Ladhani Metal Corporation supplies EN 10132-4 Cold Rolled Narrow Steel Strip in C67S, C75S, C85S, C90S, C100S, 51CrV4, 55Cr3, 56Si7, and 51CrMoV4 grades. Carbon spring steel and alloy spring steel strips are available with customized thicknesses, widths, lengths, finishes, hardness levels, and delivery conditions. These cold rolled narrow steel strips provide excellent strength, elasticity, fatigue resistance, dimensional accuracy, and surface quality for springs, retaining components, automotive parts, precision engineering, and industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10132 #EN10132Steel #EN10132SteelStrip #EN10132ColdRolledStrip #EN10132SpringSteel #ColdRolledSteelStrip #ColdRolledSteel #SpringSteelStrip #SteelStrip #PrecisionSteelStrip #CarbonSteelStrip #AlloySteelStrip #StainlessSteelStrip #HeatTreatedSteelStrip #SpringSteel #ColdRolledSteelSupplier #SteelStripManufacturer #SteelStripSupplier #SteelStripExporter #PrecisionSteelSupplier #AutomotiveSteelStrip #EngineeringSteelStrip #IndustrialSteelStrip #MachinePartsSteel #SpringApplications #MetalStripSupplier #EuropeanSteelStandard #ColdRolledStripSupplier #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior

EN 10113 Structural Steel Sheet, Plate, Strip & Coil are normalized or normalized rolled fine grain structural steel products designed for applications requiring high strength, excellent toughness, good weldability, and reliable structural performance. These steel products are suitable for demanding construction, structural engineering, heavy fabrication, machinery, and industrial applications where dependable mechanical properties are essential. Manufactured in accordance with EN 10113 specification, these structural steel sheets, plates, strips, and coils are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure consistent performance in demanding structural applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10113 Structural Steel Sheet, Plate, Strip & Coil, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Structural Steel Sheets | Structural Steel Plates | Steel Strips | Steel Coils | Fine Grain Steel Plates | Normalized Steel Plates | Heavy Steel Plates | Hot Rolled Sheets | Cut-to-Size Plates | Custom Size Strips & Coils Available Grades (EN 10113): S275N | S275NL | S355N | S355NL | S420N | S420NL | S460N | S460NL Chemical Composition (S355N Example): • Carbon (C): Max 0.20% • Silicon (Si): Max 0.55% • Manganese (Mn): Max 1.60% • Phosphorus (P): Max 0.025% • Sulphur (S): Max 0.010% • Copper (Cu): Max 0.30% • Chromium (Cr): Max 0.30% • Nickel (Ni): Max 0.30% • Molybdenum (Mo): Max 0.10% • Niobium (Nb): Max 0.05% • Titanium (Ti): Max 0.05% • Vanadium (V): Max 0.10% Mechanical Properties: • High yield strength • Excellent tensile strength • Superior impact toughness • Good ductility • Excellent weldability • Good resistance to brittle fracture • Reliable performance under structural loads • Mechanical properties vary according to grade and product thickness Key Features: • High structural strength • Fine grain structure • Excellent toughness • Superior weldability • Good resistance to brittle fracture • Excellent dimensional stability • Reliable performance under heavy loads • Suitable for demanding structural applications • Available in sheet, plate, strip, and coil forms Material Characteristics: EN 10113 Structural Steel Sheet, Plate, Strip & Coil provide an excellent combination of strength, toughness, ductility, and weldability. The S275N, S355N, S420N, and S460N grades provide progressively higher strength levels, while the corresponding NL grades offer enhanced impact toughness for lower-temperature service conditions. Applications: • Structural Steel Fabrication • Bridges • Building Structures • Heavy Machinery • Industrial Structures • Storage Tanks • Cranes and Lifting Equipment • Pressure-Supporting Structures • Offshore Structures • Transportation Equipment • General Engineering • Heavy Fabrication Conclusion: Ladhani Metal Corporation supplies EN 10113 Structural Steel Sheet, Plate, Strip & Coil in S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, and S460NL grades with customized thicknesses, widths, lengths, finishes, and specifications. These fine grain structural steels provide excellent strength, toughness, weldability, and reliable performance for bridges, building structures, heavy machinery, industrial structures, cranes, offshore structures, and general engineering applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10113 #EN10113Steel #EN10113SteelPlate #EN10113StructuralSteel #EN10113HighStrengthSteel #EN10113Plates #EN10113Sheets #ThermoMechanicalRolledSteel #TMCPSteel #FineGrainStructuralSteel #HighStrengthStructuralSteel #StructuralSteelPlate #StructuralSteelSheet #WeldableSteelPlate #LowAlloySteelPlate #EngineeringSteelPlate #IndustrialSteelPlate #HeavySteelPlate #ConstructionSteel #InfrastructureSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #StructuralSteelSupplier #HighStrengthSteelSupplier #EuropeanSteelStandard #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi

EN 10095 Heat Resisting Steels and Nickel Alloys – Sheet, Plate, Strip & Bar EN 10095 Heat Resisting Steels and Nickel Alloys are high-performance materials designed for applications requiring excellent resistance to elevated temperatures, oxidation, scaling, corrosion, and thermal stress. These heat-resisting materials are supplied in sheet, plate, strip, and bar forms and are widely used in furnaces, heat-treatment equipment, petrochemical plants, power generation systems, industrial heating equipment, and high-temperature process applications. Manufactured in accordance with EN 10095 specification, these heat-resisting steels and nickel alloys are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure reliable performance during prolonged exposure to elevated temperatures. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10095 Heat Resisting Steels and Nickel Alloys – Sheet, Plate, Strip & Bar, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Heat Resisting Steel Sheets | Heat Resisting Steel Plates | Heat Resisting Steel Strips | Heat Resisting Steel Bars | Nickel Alloy Sheets | Nickel Alloy Plates | Nickel Alloy Strips | Nickel Alloy Bars | Round Bars | Cut-to-Length Bars Chemical Composition (X15CrNiSi25-21 Example): • Carbon (C): Max 0.20% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): Max 2.00% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Phosphorus (P): Max 0.045% • Sulphur (S): Max 0.030% Mechanical Properties: • Good tensile and yield strength at elevated temperatures • Excellent resistance to oxidation and scaling • Good creep resistance • Excellent thermal stability • Good toughness and ductility • Suitable for welding and fabrication • Reliable performance during prolonged high-temperature service • Mechanical properties vary according to grade, product form, and delivery condition Key Features: • Excellent high-temperature strength • Superior oxidation resistance • Excellent scaling resistance • Good creep and thermal fatigue resistance • Reliable corrosion resistance • Excellent thermal stability • Good weldability and fabrication characteristics • Suitable for continuous high-temperature service • Long service life in demanding environments Material Characteristics: EN 10095 Heat Resisting Steels and Nickel Alloys provide an excellent combination of high-temperature strength, oxidation resistance, corrosion resistance, and thermal stability. Chromium improves resistance to oxidation and scaling, while nickel contributes to high-temperature strength and structural stability. Selected grades containing silicon, aluminium, titanium, and other alloying elements provide enhanced performance during thermal cycling and prolonged exposure to elevated temperatures. Applications: • Industrial Furnaces • Heat Treatment Equipment • Furnace Fixtures • Radiant Tubes • Petrochemical Plants • Power Generation Equipment • Industrial Heating Systems • Thermal Processing Equipment • High-Temperature Process Equipment • Heat Exchangers • Burner Components • Furnace Conveyor Systems Conclusion: Ladhani Metal Corporation supplies EN 10095 Heat Resisting Steels and Nickel Alloys in sheet, plate, strip, and bar forms, available in various grades, dimensions, finishes, and customized specifications. These high-performance materials provide excellent high-temperature strength, oxidation resistance, scaling resistance, thermal stability, and long-term durability for furnaces, heat-treatment equipment, petrochemical plants, power generation systems, and other demanding high-temperature applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10095 #EN10095Steel #EN10095NickelAlloys #HeatResistingSteels #HeatResistantSteel #HeatResistantAlloys #NickelAlloys #HeatResistantNickelAlloys #HighTemperatureAlloys #HighTemperatureSteel #HeatResistantSteelPlates #HeatResistantSteelBars #HeatResistantSteelSheets #NickelAlloyPlate #NickelAlloySheet #NickelAlloyBar #HighTemperatureMaterials #CorrosionResistantAlloys #IndustrialAlloys #PowerPlantMaterials #PetrochemicalAlloys #FurnaceMaterials #EngineeringAlloys #AlloyManufacturer #NickelAlloyManufacturer #NickelAlloySupplier #NickelAlloyExporter #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad

EN 10087 Hot-Rolled Bars and Rods are high-quality free-cutting steels supplied in hot-rolled bar and rod form. These steel products are designed for applications requiring excellent machinability, consistent mechanical properties, dimensional accuracy, and reliable performance during high-speed machining and automatic manufacturing operations. They are widely used for producing shafts, bolts, screws, nuts, bushings, fittings, automotive components, and precision-machined parts. Manufactured in accordance with EN 10087 specification, these free-cutting steel bars and rods are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure consistent performance during machining and fabrication. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10087 Hot-Rolled Bars and Rods, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Hot-Rolled Steel Bars | Hot-Rolled Steel Rods | Free-Cutting Steel Bars | Free-Cutting Steel Rods | Round Bars | Bright Bars | Hexagonal Bars | Square Bars | Flat Bars | Cut-to-Length Bars Available Grades (EN 10087): 9SMn28 | 9SMnPb28 | 11SMn30 | 11SMnPb30 | 11SMn37 | 11SMnPb37 | 15SMn13 | 10S20 | 10SPb20 | 35S20 Chemical Composition (11SMn30 Example): • Carbon (C): 0.07 – 0.14% • Silicon (Si): Max 0.05% • Manganese (Mn): 0.90 – 1.30% • Phosphorus (P): Max 0.11% • Sulphur (S): 0.27 – 0.33% Mechanical Properties: • Excellent machinability • Good tensile strength • Good yield strength • Suitable for high-speed machining • Good dimensional stability • Consistent mechanical performance • Suitable for automatic machining operations • Mechanical properties vary according to grade, bar diameter, and delivery condition Key Features: • Excellent machinability • High productivity during machining • Consistent chemical composition • Good dimensional accuracy • Suitable for automatic screw machines • Good surface finish after machining • Reliable performance in precision components • Available in multiple bar and rod forms Material Characteristics: EN 10087 Hot-Rolled Bars and Rods are free-cutting steels containing controlled amounts of sulphur, phosphorus, and, in selected grades, lead to improve machinability. These materials are particularly suitable for manufacturing components that require extensive machining, high production rates, and consistent dimensional accuracy. Applications: • Automotive Components • Shafts • Bolts and Screws • Nuts • Bushings • Fittings • Machine Components • Precision Machined Parts • Automatic Screw Machine Components • General Engineering Components Conclusion: Ladhani Metal Corporation supplies EN 10087 Hot-Rolled Bars and Rods in 9SMn28, 9SMnPb28, 11SMn30, 11SMnPb30, 11SMn37, 11SMnPb37, 15SMn13, 10S20, 10SPb20, and 35S20 grades with customized diameters, lengths, finishes, and specifications. These free-cutting steel bars and rods provide excellent machinability, dimensional accuracy, productivity, and reliable performance for automotive, precision machining, automatic screw machine, and general engineering applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10087 #EN10087Steel #EN10087Bars #EN10087Rods #EN10087HotRolledBars #EN10087HotRolledRods #HotRolledSteelBars #HotRolledSteelRods #SteelBars #SteelRods #CarbonSteelBars #AlloySteelBars #EngineeringSteelBars #IndustrialSteelBars #SteelRodManufacturer #SteelBarManufacturer #SteelBarSupplier #SteelRodSupplier #SteelBarExporter #SteelRodExporter #HotRolledSteelSupplier #PrecisionSteelBars #IndustrialSteelProducts #EngineeringMaterials #ForgingSteelBars #MachiningSteelBars #EuropeanSteelStandard #SteelBarStockist #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10028-7 Stainless Steel Sheet & Plate are stainless steel products supplied for pressure equipment applications requiring excellent corrosion resistance, mechanical strength, toughness, weldability, and reliable performance under demanding service conditions. These stainless steel plates and sheets are widely used in chemical processing, petrochemical plants, power generation, food processing, pharmaceutical equipment, heat exchangers, pressure vessels, and industrial process systems. Manufactured in accordance with EN 10028-7 specification, these stainless steel sheets and plates are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance in pressure equipment and corrosive service environments. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10028-7 Stainless Steel Sheet & Plate, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Stainless Steel Plates | Stainless Steel Sheets | Pressure Vessel Plates | Austenitic Stainless Steel Plates | Ferritic Stainless Steel Plates | Duplex Stainless Steel Plates | Hot Rolled Plates | Cold Rolled Sheets | Cut-to-Size Plates | Custom Size Sheets Available Grades (EN 10028-7): X5CrNi18-10 | X2CrNi18-9 | X2CrNiN18-7 | X6CrNiTi18-10 | X6CrNiNb18-10 | X2CrNiMo17-12-2 | X2CrNiMo18-14-3 | X6CrNiMoTi17-12-2 | X2CrNiMoN17-13-3 | X2CrNiMoN18-14-3 | X2CrNiMo17-12-3 | X2CrNiMo18-15-4 | X2CrNiMoN18-12-4 | X2CrNiMoN18-15-4 | X2CrNiMoN22-5-3 | X2CrNiMoN25-7-4 | X2CrNiMoN25-7-4* Chemical Composition (X5CrNi18-10 Example): • Carbon (C): Max 0.07% • Silicon (Si): Max 1.00% • Manganese (Mn): Max 2.00% • Phosphorus (P): Max 0.045% • Sulphur (S): Max 0.015% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Nitrogen (N): Max 0.10% Mechanical Properties: • High tensile strength • Good yield strength • Excellent toughness and ductility • Excellent corrosion resistance • Superior weldability • Good formability • Reliable performance under pressure • Mechanical properties vary according to grade and plate thickness Key Features: • Excellent corrosion resistance • High mechanical strength • Superior toughness and ductility • Excellent weldability • Good resistance to oxidation • Excellent formability and fabrication characteristics • Reliable performance in pressure equipment • Suitable for corrosive and demanding environments Material Characteristics: EN 10028-7 Stainless Steel Sheet & Plate include stainless steel grades designed specifically for pressure equipment applications. The specification covers a broad range of stainless steels, including austenitic, ferritic, duplex, and other corrosion-resistant grades. Grade selection depends on the required corrosion resistance, strength, temperature capability, weldability, and service environment. Applications: • Pressure Vessels • Chemical Processing Equipment • Petrochemical Plants • Heat Exchangers • Boilers • Power Generation Plants • Pharmaceutical Equipment • Food Processing Equipment • Desalination Plants • Water Treatment Equipment • Oil & Gas Equipment • Industrial Process Equipment Conclusion: Ladhani Metal Corporation supplies EN 10028-7 Stainless Steel Sheet & Plate in various austenitic, ferritic, duplex, and corrosion-resistant grades with customized thicknesses, widths, lengths, finishes, and specifications. These stainless steel pressure vessel plates and sheets provide excellent corrosion resistance, strength, toughness, weldability, and long-term durability for chemical processing, petrochemical, pharmaceutical, food processing, power generation, heat exchanger, and industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN100287 #EN10028Part7 #EN100287StainlessSteel #EN100287Sheet #EN100287Plate #EN100287StainlessSteelSheet #EN100287StainlessSteelPlate #StainlessSteelSheet #StainlessSteelPlate #PressureVesselStainlessSteel #PressureVesselPlate #PressureVesselSheet #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #CorrosionResistantSteel #HeatResistantStainlessSteel #IndustrialStainlessSteel #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelPlateSupplier #StainlessSteelSheetSupplier #EngineeringStainlessSteel #PressureEquipmentSteel #EuropeanSteelStandard #IndustrialSteelProducts #LadhaniMetals #StainlessSteelSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi

EN 10028-6 Steel Sheet & Plate are quenched and tempered fine grain steels supplied for pressure equipment applications requiring high strength, excellent toughness, good weldability, and reliable performance under demanding pressure conditions. These pressure vessel steel plates and sheets are widely used in pressure vessels, storage tanks, power generation equipment, petrochemical plants, oil & gas facilities, and heavy industrial applications. Manufactured in accordance with EN 10028-6 specification, these quenched and tempered pressure vessel steel plates and sheets are produced with controlled chemical composition, mechanical properties, impact toughness, dimensional tolerances, and surface quality to ensure dependable performance in demanding service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10028-6 Steel Sheet & Plate, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Pressure Vessel Steel Plates | Steel Sheets | Quenched & Tempered Plates | Fine Grain Steel Plates | High Strength Steel Plates | Boiler Plates | Heavy Plates | Cut-to-Size Plates | Industrial Plates | Custom Size Sheets Available Grades (EN 10028-6): P355Q | P355QH | P355QL1 | P355QL2 | P460Q | P460QH | P460QL1 | P460QL2 | P500Q | P500QH | P500QL1 | P500QL2 | P690Q | P690QH | P690QL1 | P690QL2 Chemical Composition (P355Q Example): • Carbon (C): Max 0.20% • Silicon (Si): Max 0.40% • Manganese (Mn): Max 1.70% • Phosphorus (P): Max 0.025% • Sulphur (S): Max 0.010% • Chromium (Cr): Max 0.30% • Nickel (Ni): Max 0.70% • Molybdenum (Mo): Max 0.70% • Copper (Cu): Max 0.30% • Vanadium (V): Max 0.12% • Niobium (Nb): Max 0.05% • Titanium (Ti): Max 0.05% • Aluminium (Al): Min 0.015% Mechanical Properties: • High tensile strength • High yield strength • Excellent impact toughness • Good ductility • Excellent weldability • Reliable performance under high pressure • Good resistance to brittle fracture • Mechanical properties vary according to grade and plate thickness Key Features: • High strength and toughness • Quenched and tempered condition • Fine grain structure • Excellent resistance to brittle fracture • Superior weldability • Good dimensional stability • Excellent impact resistance • Reliable performance in pressure equipment • Suitable for demanding industrial applications Material Characteristics: EN 10028-6 Steel Sheet & Plate are quenched and tempered fine grain steels developed for pressure equipment requiring high strength, toughness, and reliable performance. The P355Q, P460Q, P500Q, and P690Q grade families provide different strength levels, while the QH, QL1, and QL2 grades are selected according to the required impact toughness and service temperature requirements. Applications: • Pressure Vessels • Storage Tanks • Boilers • Petrochemical Plants • Oil & Gas Equipment • Power Generation Plants • Chemical Processing Equipment • High-Pressure Equipment • Industrial Process Equipment • Heavy Engineering Applications Conclusion: Ladhani Metal Corporation supplies EN 10028-6 Steel Sheet & Plate in P355Q, P355QH, P355QL1, P355QL2, P460Q, P460QH, P460QL1, P460QL2, P500Q, P500QH, P500QL1, P500QL2, P690Q, P690QH, P690QL1, and P690QL2 grades with customized thicknesses, widths, lengths, finishes, and specifications. These quenched and tempered pressure vessel steel plates and sheets provide excellent strength, toughness, weldability, impact resistance, and reliable performance for pressure vessels, storage tanks, petrochemical plants, power generation, oil & gas, and heavy industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN100286 #EN10028Part6 #EN100286Steel #EN100286Sheet #EN100286Plate #EN100286SteelSheet #EN100286SteelPlate #QuenchedAndTemperedSteel #HighStrengthSteelPlate #PressureVesselSteel #PressureVesselPlate #PressureVesselSheet #FineGrainSteelPlate #FineGrainSteelSheet #AlloySteelPlate #CarbonSteelPlate #HeavySteelPlate #EngineeringSteelPlate #IndustrialSteelPlate #BoilerSteelPlate #PressureEquipmentSteel #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #HighYieldStrengthSteel #HeatTreatedSteelPlate #EuropeanSteelStandard #IndustrialSteelProducts #LadhaniMetals #SteelPlateSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad

EN 10028-5 Steel Sheet & Plate are thermomechanically rolled fine grain steels supplied for pressure equipment applications. These pressure vessel steel plates and sheets provide high strength, excellent toughness, good weldability, and reliable performance under demanding pressure and temperature conditions. They are widely used in pressure vessels, boilers, storage tanks, petrochemical plants, chemical processing equipment, power generation, and industrial process systems. Manufactured in accordance with EN 10028-5 specification, these thermomechanically rolled steel plates and sheets are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance in demanding pressure applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10028-5 Steel Sheet & Plate, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Pressure Vessel Steel Plates | Steel Sheets | Fine Grain Steel Plates | Thermomechanically Rolled Plates | Boiler Plates | Hot Rolled Plates | Heavy Plates | Cut-to-Size Plates | Industrial Plates | Custom Size Sheets Available Grades (EN 10028-5): P355M | P355ML1 | P355ML2 | P420M | P420ML1 | P420ML2 | P460M | P460ML1 | P460ML2 Chemical Composition (P355M Example): • Carbon (C): Max 0.12% • Silicon (Si): Max 0.50% • Manganese (Mn): 1.00 – 1.70% • Phosphorus (P): Max 0.025% • Sulphur (S): Max 0.010% • Aluminium (Al): Min 0.015% • Niobium (Nb): Max 0.05% • Vanadium (V): Max 0.10% • Titanium (Ti): Max 0.05% • Chromium (Cr): Max 0.30% • Nickel (Ni): Max 0.50% • Molybdenum (Mo): Max 0.10% Mechanical Properties: • High tensile strength • High yield strength • Excellent toughness • Good ductility • Excellent weldability • Reliable performance under pressure • Good resistance to brittle fracture • Mechanical properties vary according to grade and plate thickness Key Features: • High strength-to-weight ratio • Fine grain structure • Excellent toughness • Superior weldability • Good dimensional stability • Excellent resistance to deformation • Reliable performance in pressure equipment • Suitable for demanding industrial applications Material Characteristics: EN 10028-5 Steel Sheet & Plate are thermomechanically rolled fine grain steels developed for pressure equipment requiring high strength, toughness, and excellent weldability. The P355M, P420M, and P460M grade families provide different strength levels, while the ML1 and ML2 grades are selected for applications requiring specified impact toughness at lower temperatures. Applications: • Pressure Vessels • Boilers • Storage Tanks • Heat Exchangers • Petrochemical Plants • Chemical Processing Equipment • Power Generation Plants • Oil & Gas Equipment • Industrial Process Equipment • High-Pressure Equipment Conclusion: Ladhani Metal Corporation supplies EN 10028-5 Steel Sheet & Plate in P355M, P355ML1, P355ML2, P420M, P420ML1, P420ML2, P460M, P460ML1, and P460ML2 grades with customized thicknesses, widths, lengths, finishes, and specifications. These thermomechanically rolled pressure vessel steel plates and sheets provide excellent strength, toughness, weldability, and reliable performance for pressure vessels, boilers, storage tanks, petrochemical plants, chemical processing, power generation, and industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN100285 #EN10028Part5 #EN100285Steel #EN100285Sheet #EN100285Plate #EN100285SteelSheet #EN100285SteelPlate #ThermoMechanicalRolledSteel #TMCPSteelPlate #TMCPSteelSheet #PressureVesselSteel #PressureVesselPlate #PressureVesselSheet #FineGrainSteelPlate #FineGrainSteelSheet #HighStrengthSteelPlate #WeldableSteelPlate #AlloySteelPlate #CarbonSteelPlate #IndustrialSteelPlate #EngineeringSteelPlate #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #PressureEquipmentSteel #BoilerSteelPlate #HeavySteelPlate #EuropeanSteelStandard #LadhaniMetals #SteelPlateSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai

EN 10028-4 Nickel Alloy Steel Sheet & Plate are nickel alloyed special steels supplied for pressure equipment applications requiring excellent toughness, strength, and reliable performance at low and elevated temperatures. These pressure vessel steel plates and sheets are particularly suitable for applications where resistance to brittle fracture and dependable low-temperature impact properties are essential. They are widely used in pressure vessels, storage tanks, chemical processing equipment, cryogenic equipment, petrochemical plants, and industrial process systems. Manufactured in accordance with EN 10028-4 specification, these nickel alloy steels are produced with controlled chemical composition, mechanical properties, impact toughness, dimensional tolerances, and surface quality to ensure reliable performance under demanding pressure and temperature conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10028-4 Nickel Alloy Steel Sheet & Plate, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Nickel Alloy Steel Plates | Nickel Alloy Steel Sheets | Pressure Vessel Plates | Cryogenic Steel Plates | Low-Temperature Steel Plates | Hot Rolled Plates | Normalized Plates | Cut-to-Size Plates | Heavy Plates | Custom Size Sheets Available Grades (EN 10028-4): 11MnNi5-3 | 13MnNi6-3 | 15NiMn6 | 12Ni14 | X10Ni5 | X7Ni9 | X8Ni9 | X7Ni6 Mechanical Properties: • High tensile strength • Excellent yield strength • Superior impact toughness • Excellent low-temperature toughness • Good ductility • Good weldability • Reliable performance under pressure • Mechanical properties vary according to grade and plate thickness Key Features: • Excellent low-temperature toughness • High mechanical strength • Superior resistance to brittle fracture • Good weldability • Excellent impact resistance • Reliable performance under pressure • Suitable for cryogenic and low-temperature service • Excellent dimensional stability Material Characteristics: EN 10028-4 Nickel Alloy Steel Sheet & Plate are designed for pressure equipment requiring enhanced toughness and reliable mechanical performance at low temperatures. Nickel alloying improves toughness and helps these steels maintain dependable mechanical properties in demanding low-temperature and pressure service conditions. Applications: • Pressure Vessels • Cryogenic Equipment • Storage Tanks • Chemical Processing Equipment • Petrochemical Plants • Oil & Gas Equipment • Low-Temperature Pressure Equipment • Refrigeration Equipment • Gas Processing Plants • Industrial Process Equipment Conclusion: Ladhani Metal Corporation supplies EN 10028-4 Nickel Alloy Steel Sheet & Plate in 11MnNi5-3, 13MnNi6-3, 15NiMn6, 12Ni14, X10Ni5, X7Ni9, X8Ni9, and X7Ni6 grades with customized thicknesses, widths, lengths, finishes, and specifications. These nickel alloy pressure vessel steel plates and sheets provide excellent strength, impact toughness, low-temperature performance, and resistance to brittle fracture for pressure vessels, cryogenic equipment, chemical processing, petrochemical, oil & gas, and industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN100284 #EN10028Part4 #EN100284NickelSteel #EN10028NickelSteel #NickelAlloySteel #NickelSteelPlate #NickelSteelSheet #PressureVesselSteel #PressureVesselPlate #PressureVesselSheet #CryogenicSteelPlate #LowTemperatureSteel #LowTemperaturePressureVesselSteel #AlloySteelPlate #AlloySteelSheet #HighStrengthSteelPlate #EngineeringSteelPlate #IndustrialSteelPlate #SteelPlateManufacturer #SteelPlateSupplier #SteelPlateExporter #NickelSteelSupplier #NickelSteelManufacturer #PressureEquipmentSteel #CryogenicSteel #EuropeanSteelStandard #IndustrialSteelProducts #LadhaniMetals #SteelPlateSolutions #NickelAlloySteelPlate #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad

EN 10028-3 Steel Sheet & Plate are weldable fine grain steels supplied for pressure equipment applications. These pressure vessel steel plates and sheets are designed to provide excellent mechanical strength, toughness, weldability, and reliable performance under pressure and elevated-temperature service conditions. They are widely used in pressure vessels, boilers, heat exchangers, petrochemical plants, power generation equipment, and industrial process systems. Manufactured in accordance with EN 10028-3 specification, these fine grain pressure vessel steel sheets and plates are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance in demanding pressure applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10028-3 Steel Sheet & Plate, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Steel Plates | Steel Sheets | Pressure Vessel Plates | Fine Grain Steel Plates | Boiler Plates | Hot Rolled Plates | Normalized Plates | Cut-to-Size Plates | Heavy Plates | Custom Size Sheets Available Grades (EN 10028-3): P275NH | P275NL1 | P275NL2 | P355N | P355NH | P355NL1 | P355NL2 | P460N | P460NH | P460NL1 | P460NL2 | P500NH | P500NL1 | P500NL2 | P620NH | P620NL1 | P620NL2 | P690NH | P690NL1 | P690NL2 Mechanical Properties: • High tensile strength • Excellent yield strength • Superior toughness • Good ductility • Excellent weldability • Reliable performance under pressure • Good resistance to brittle fracture • Mechanical properties vary according to grade and plate thickness Key Features: • Fine grain structure • High mechanical strength • Excellent toughness • Superior weldability • Good resistance to brittle fracture • Excellent dimensional stability • Suitable for cold and hot fabrication • Reliable performance in pressure equipment Material Characteristics: EN 10028-3 Steel Sheet & Plate are fine grain weldable steels developed for pressure equipment where high strength, toughness, and reliable weldability are essential. The P275, P355, P460, P500, P620, and P690 grade families provide different strength levels, while the N, NH, and NL grades are selected according to the required delivery condition and low-temperature toughness requirements. Applications: • Pressure Vessels • Boilers • Heat Exchangers • Storage Tanks • Petrochemical Plants • Chemical Processing Equipment • Power Generation Plants • Industrial Process Equipment • Oil & Gas Equipment • High-Pressure Equipment Conclusion: Ladhani Metal Corporation supplies EN 10028-3 Steel Sheet & Plate in P275NH, P275NL1, P275NL2, P355N, P355NH, P355NL1, P355NL2, P460N, P460NH, P460NL1, P460NL2, P500NH, P500NL1, P500NL2, P620NH, P620NL1, P620NL2, P690NH, P690NL1, and P690NL2 grades with customized thicknesses, widths, lengths, finishes, and specifications. These fine grain pressure vessel steel plates and sheets provide excellent strength, toughness, weldability, and reliable performance for pressure vessels, boilers, heat exchangers, petrochemical plants, power generation, and industrial process equipment. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10028 #EN10028Steel #EN10028Sheet #EN10028Plate #EN10028SteelSheet #EN10028SteelPlate #PressureVesselSteel #PressureVesselPlates #PressureVesselSheets #BoilerSteelPlate #CarbonSteelPlate #CarbonSteelSheet #AlloySteelPlate #AlloySteelSheet #StainlessSteelPlate #StainlessSteelSheet #HeatResistantSteel #HighStrengthSteelPlate #EngineeringSteelPlate #IndustrialSteelPlate #SteelSheetManufacturer #SteelPlateManufacturer #SteelSheetSupplier #SteelPlateSupplier #SteelPlateExporter #PressureEquipmentSteel #EuropeanSteelStandard #IndustrialSteelProducts #LadhaniMetals #SteelPlateSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad

EN 10028-2 Steel Sheet & Plate are non-alloy and alloy special steels supplied in plate and sheet form for pressure equipment applications. These steel products are designed to provide excellent mechanical strength, toughness, weldability, and reliable performance under elevated-temperature and pressure service conditions. They are widely used in pressure vessels, boilers, heat exchangers, petrochemical plants, power generation equipment, and industrial process systems. Manufactured in accordance with EN 10028-2 specification, these pressure vessel steel sheets and plates are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance in demanding pressure and temperature applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10028-2 Steel Sheet & Plate, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Steel Plates | Steel Sheets | Pressure Vessel Plates | Boiler Plates | Hot Rolled Plates | Cut-to-Size Plates | Heavy Plates | Heat Exchanger Plates | Custom Size Sheets | Industrial Plates Available Grades (EN 10028-2): P235GH | P265GH | P295GH | P355GH | 16Mo3 | 13CrMo4-5 | 10CrMo5-5 | 12CrMo9-10 | 11CrMo9-10 Mechanical Properties: • High tensile strength • Excellent yield strength • Good toughness and ductility • Excellent weldability • Good resistance to elevated temperatures • Reliable performance under pressure • Suitable for fabrication and forming • Mechanical properties vary according to grade and plate thickness Key Features: • High mechanical strength • Excellent pressure resistance • Good weldability • Superior toughness • Excellent high-temperature performance • Good dimensional stability • Reliable performance in pressure equipment • Suitable for demanding industrial applications Material Characteristics: EN 10028-2 Steel Sheet & Plate include non-alloy and alloy special steels developed for pressure equipment operating at elevated temperatures. Grades such as P235GH, P265GH, P295GH, and P355GH are commonly selected for pressure vessel applications, while alloy grades containing chromium and molybdenum provide enhanced high-temperature strength and resistance to thermal stresses. Applications: • Pressure Vessels • Boilers • Heat Exchangers • Petrochemical Plants • Power Generation Plants • Chemical Processing Equipment • Refineries • Steam Systems • Industrial Process Equipment • High-Temperature Pressure Equipment Conclusion: Ladhani Metal Corporation supplies EN 10028-2 Steel Sheet & Plate in P235GH, P265GH, P295GH, P355GH, 16Mo3, 13CrMo4-5, 10CrMo5-5, 12CrMo9-10, and 11CrMo9-10 grades with customized thicknesses, widths, lengths, finishes, and specifications. These pressure vessel steel plates and sheets provide excellent strength, toughness, weldability, and high-temperature performance for boilers, pressure vessels, heat exchangers, petrochemical plants, power generation, and industrial process equipment. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN10028 #EN10028Steel #EN10028Sheet #EN10028Plate #EN10028SteelSheet #EN10028SteelPlate #PressureVesselSteel #PressureVesselPlates #PressureVesselSheets #BoilerSteelPlate #CarbonSteelPlate #CarbonSteelSheet #AlloySteelPlate #AlloySteelSheet #StainlessSteelPlate #StainlessSteelSheet #HeatResistantSteel #HighStrengthSteelPlate #EngineeringSteelPlate #IndustrialSteelPlate #SteelSheetManufacturer #SteelPlateManufacturer #SteelSheetSupplier #SteelPlateSupplier #SteelPlateExporter #PressureEquipmentSteel #EuropeanSteelStandard #IndustrialSteelProducts #LadhaniMetals #SteelPlateSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi

EN 10016-4 Non-Alloy Steel Rod & Wire are high-quality steel products designed for drawing, cold rolling, wire manufacturing, and other demanding applications requiring consistent chemical composition, mechanical strength, dimensional accuracy, and surface quality. These non-alloy steel rods and wires are suitable for further processing into wire products, fasteners, springs, automotive components, and general engineering products. Manufactured in accordance with EN 10016-4 specification, these non-alloy steel rods and wires are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure reliable performance during drawing, cold forming, and cold rolling operations. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10016-4 Non-Alloy Steel Rod & Wire, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Non-Alloy Steel Rods | Steel Wire Rods | Drawing Quality Rods | Cold Rolling Rods | Cold Heading Rods | Bright Rods | Industrial Wire Rods | Drawing Wire | Cold Rolled Wire | Precision Wire | Custom Size Rods & Wire Available Grades (EN 10016-4): C3D2 | C5D2 | C8D2 | C10D2 | C12D2 | C15D2 | C18D2 | C20D2 | C26D2 | C32D2 | C36D2 | C38D2 | C40D2 | C42D2 | C46D2 | C48D2 | C50D2 | C52D2 | C56D2 | C58D2 | C60D2 | C62D2 | C66D2 | C68D2 | C70D2 | C72D2 | C76D2 | C78D2 | C80D2 | C82D2 | C86D2 | C88D2 | C92D2 | C98D2 Chemical Composition: • Carbon (C): Grade dependent • Manganese (Mn): Grade dependent • Silicon (Si): Grade dependent • Phosphorus (P): Controlled according to grade • Sulphur (S): Controlled according to grade • Chromium (Cr): Controlled residual element • Nickel (Ni): Controlled residual element • Copper (Cu): Controlled residual element Mechanical Properties: • Good tensile strength • Good yield strength • Excellent ductility • Good toughness • Suitable for drawing and cold rolling • Good cold forming characteristics • Reliable performance during further processing • Mechanical properties vary according to grade, diameter, and delivery condition Key Features: • Consistent chemical composition • Good mechanical strength • Excellent surface quality • High dimensional accuracy • Good ductility and toughness • Suitable for cold drawing • Suitable for cold rolling • Reliable performance in further manufacturing processes • Wide range of carbon grades Material Characteristics: EN 10016-4 Non-Alloy Steel Rod & Wire provide a balanced combination of strength, ductility, toughness, surface quality, and processing characteristics. The wide range of grades from C3D2 through C98D2 allows selection according to the required carbon content, mechanical properties, drawing performance, cold-forming requirements, and final application. Applications: • Wire Manufacturing • Cold Drawing • Cold Rolling • Fasteners • Bolts and Screws • Springs • Automotive Components • Mechanical Components • Precision Wire Products • Construction Components • General Engineering • Industrial Fabrication Conclusion: Ladhani Metal Corporation supplies EN 10016-4 Non-Alloy Steel Rod & Wire in C3D2, C5D2, C8D2, C10D2, C12D2, C15D2, C18D2, C20D2, C26D2, C32D2, C36D2, C38D2, C40D2, C42D2, C46D2, C48D2, C50D2, C52D2, C56D2, C58D2, C60D2, C62D2, C66D2, C68D2, C70D2, C72D2, C76D2, C78D2, C80D2, C82D2, C86D2, C88D2, C92D2, and C98D2 grades with customized diameters, finishes, lengths, and specifications. These non-alloy steel rods and wires provide excellent dimensional accuracy, mechanical strength, surface quality, and reliable processing performance for wire drawing, cold rolling, fasteners, springs, automotive components, mechanical engineering, and general industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #EN100164 #EN10016Part4 #EN100164SteelRod #EN100164NonAlloySteel #NonAlloySteelRod #SteelRodForDrawing #SteelRodForColdRolling #ColdRollingSteelRod #DrawingQualitySteel #CarbonSteelRod #LowCarbonSteelRod #SteelWireRod #ColdDrawnSteel #ColdRolledSteel #PrecisionSteelRod #EngineeringSteelRod #IndustrialSteelRod #SteelRodManufacturer #SteelRodSupplier #SteelRodExporter #CarbonSteelSupplier #NonAlloySteelSupplier #SteelWireRodManufacturer #SteelWireRodSupplier #ColdWorkingSteel #MetalDrawingMaterials #EngineeringMaterials #EuropeanSteelStandard #LadhaniMetals #SteelRodSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai

DIN 28181 Welded Steel Tubes are high-quality welded tubes designed for tubular heat exchangers, condensers, process equipment, and industrial heat-transfer systems. These tubes provide excellent mechanical strength, corrosion resistance, weldability, dimensional accuracy, and reliable performance under demanding temperature and pressure conditions. Manufactured in accordance with DIN 28181 specification, these welded steel tubes are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance in heat-transfer and process equipment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of DIN 28181 Welded Steel Tubes, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Welded Steel Tubes | Welded Stainless Steel Tubes | Heat Exchanger Tubes | Condenser Tubes | Process Tubes | Heat Transfer Tubes | Boiler Tubes | Industrial Tubes | Precision Tubes | Cut-to-Length Tubes Available Grades (DIN 28181): P235GH | P215NL | 16Mo3 | X5CrNi18-10 | X5CrNiMo17-12-2 | X6CrNiMoTi17-12-2 | X6CrNiTi18-10 Note: The current DIN 28181 grade range includes P235GH, P215NL, 16Mo3, X5CrNi18-10, X5CrNiMo17-12-2, X6CrNiMoTi17-12-2, and X6CrNiTi18-10. Older grades St 37.0, St 37.8, and TTSt 35 N are not included in the current grade range. Chemical Composition: • Carbon (C): Grade dependent • Manganese (Mn): Grade dependent • Silicon (Si): Grade dependent • Chromium (Cr): Grade dependent • Nickel (Ni): Grade dependent • Molybdenum (Mo): Grade dependent • Titanium (Ti): Present in stabilized grades • Phosphorus (P): Controlled according to grade • Sulphur (S): Controlled according to grade Mechanical Properties: • Good tensile and yield strength • Excellent toughness and ductility • Good weldability • Excellent resistance to thermal stress • Reliable performance under pressure and elevated temperatures • Good dimensional stability • Mechanical properties vary according to grade, tube dimensions, and delivery condition Key Features: • Excellent heat-transfer performance • High mechanical strength • Good corrosion resistance • Excellent weldability • Superior dimensional accuracy • Good resistance to thermal and pressure stresses • Reliable long-term service performance • Suitable for demanding industrial environments Material Characteristics: DIN 28181 Welded Steel Tubes combine mechanical strength, heat resistance, corrosion resistance, weldability, and dimensional accuracy. The current grade range includes carbon and low-alloy pressure vessel steels as well as austenitic stainless steel grades, allowing the tubes to be selected for different temperature, pressure, corrosion, and heat-transfer requirements. Applications: • Tubular Heat Exchangers • Condensers • Process Equipment • Heat-Transfer Systems • Chemical Processing Plants • Petrochemical Industries • Power Generation Plants • Boiler Equipment • Industrial Cooling Systems • General Process Engineering Conclusion: Ladhani Metal Corporation supplies DIN 28181 Welded Steel Tubes in P235GH, P215NL, 16Mo3, X5CrNi18-10, X5CrNiMo17-12-2, X6CrNiMoTi17-12-2, and X6CrNiTi18-10 grades with customized outside diameters, wall thicknesses, lengths, finishes, and specifications. These welded tubes provide excellent strength, heat-transfer performance, corrosion resistance, weldability, and long-term durability for heat exchangers, condensers, process equipment, and industrial heat-transfer systems. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #DIN28181 #DIN28181Tubes #DIN28181SteelTubes #DIN28181WeldedTubes #WeldedSteelTubes #WeldedStainlessSteelTubes #IndustrialSteelTubes #StainlessSteelTubes #AusteniticStainlessSteelTubes #CarbonSteelTubes #AlloySteelTubes #ProcessPipingTubes #HeatExchangerTubes #BoilerTubes #PressureTubes #IndustrialPiping #ChemicalProcessingTubes #PetrochemicalTubes #OilAndGasTubes #PowerPlantTubes #EngineeringSteelTubes #PrecisionSteelTubes #SteelTubeManufacturer #SteelTubeSupplier #SteelTubeExporter #WeldedTubeManufacturer #DINStandardTubes #IndustrialTubeSupplier #LadhaniMetals #SteelTubeSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad

DIN 28180 Steel Tubes are seamless steel tubes designed for demanding industrial applications requiring reliable mechanical strength, dimensional accuracy, toughness, and resistance to elevated temperatures. These tubes are available in carbon steel and low-alloy steel grades and are suitable for boilers, heat exchangers, pressure equipment, chemical plants, and power generation systems. Manufactured in accordance with DIN 28180 specification, these steel tubes are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance under pressure and elevated-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of DIN 28180 Steel Tubes, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Seamless Steel Tubes | Boiler Tubes | Heat Exchanger Tubes | Pressure Tubes | Heat-Resistant Steel Tubes | Carbon Steel Tubes | Alloy Steel Tubes | Hot Finished Tubes | Cold Drawn Tubes | Cut-to-Length Tubes Available Grades (DIN 28180): 13CrMo4-4 | 15Mo3 | St35.8 | St37.0 | TTSt35N Chemical Composition: 13CrMo4-4: • Carbon (C): 0.10 – 0.17% • Silicon (Si): 0.10 – 0.35% • Manganese (Mn): 0.40 – 0.70% • Chromium (Cr): 0.70 – 1.15% • Molybdenum (Mo): 0.15 – 0.35% • Phosphorus (P): Max 0.035% • Sulphur (S): Max 0.035% 15Mo3: • Carbon (C): 0.10 – 0.20% • Silicon (Si): 0.10 – 0.35% • Manganese (Mn): 0.40 – 0.80% • Molybdenum (Mo): 0.25 – 0.35% • Phosphorus (P): Max 0.035% • Sulphur (S): Max 0.035% St35.8: • Carbon (C): Max 0.17% • Silicon (Si): 0.10 – 0.35% • Manganese (Mn): 0.40 – 0.80% • Phosphorus (P): Max 0.035% • Sulphur (S): Max 0.035% St37.0: • Carbon (C): Max 0.17% • Silicon (Si): 0.10 – 0.35% • Manganese (Mn): 0.40 – 0.80% • Phosphorus (P): Max 0.035% • Sulphur (S): Max 0.035% TTSt35N: • Carbon (C): Max 0.17% • Silicon (Si): 0.10 – 0.35% • Manganese (Mn): 0.40 – 0.80% • Phosphorus (P): Max 0.035% • Sulphur (S): Max 0.035% Mechanical Properties: • High tensile and yield strength • Good toughness and ductility • Excellent resistance to pressure • Good performance at elevated temperatures • Suitable for welding and fabrication • Reliable dimensional stability • Mechanical properties vary according to grade, tube dimensions, and delivery condition Key Features: • High mechanical strength • Excellent pressure resistance • Good toughness • Reliable performance at elevated temperatures • Good weldability and fabrication characteristics • Excellent dimensional accuracy • Suitable for demanding industrial environments • Long service life Material Characteristics: DIN 28180 Steel Tubes provide an excellent combination of mechanical strength, toughness, heat resistance, and durability. The specification includes carbon steel and low-alloy steel grades suitable for pressure equipment, boilers, heat exchangers, and industrial systems operating under demanding temperature and pressure conditions. Applications: • Boiler Systems • Heat Exchangers • Power Generation Plants • Chemical Processing Plants • Petrochemical Industries • Pressure Equipment • Steam Systems • Industrial Process Piping • Heating Systems • General Engineering Applications Conclusion: Ladhani Metal Corporation supplies DIN 28180 Steel Tubes in 13CrMo4-4, 15Mo3, St35.8, St37.0, and TTSt35N grades with customized outside diameters, wall thicknesses, lengths, finishes, and specifications. These seamless steel tubes provide excellent mechanical strength, pressure resistance, toughness, and reliable performance for boilers, heat exchangers, power generation, chemical processing, petrochemical, and industrial applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #DIN28180 #DIN28180Tubes #DIN28180SteelTubes #DIN28180SeamlessTubes #DIN28180StainlessSteelTubes #SeamlessSteelTubes #SteelTubes #IndustrialSteelTubes #PressureTubes #BoilerTubes #HeatExchangerTubes #IndustrialPiping #ProcessPipingTubes #EngineeringSteelTubes #HighPressureTubes #CorrosionResistantTubes #PrecisionSteelTubes #SteelTubeManufacturer #SteelTubeSupplier #SteelTubeExporter #IndustrialTubeSupplier #EngineeringMaterials #SteelPipingSolutions #HeatTransferTubes #ChemicalProcessingTubes #PetrochemicalTubes #PowerPlantTubes #DINStandardTubes #LadhaniMetals #SteelTubeSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh

DIN 17459 Seamless Austenitic Steel Tubes are high-quality seamless stainless steel tubes designed for applications requiring excellent corrosion resistance, high mechanical strength, good weldability, toughness, and reliable performance at elevated temperatures. These tubes are suitable for demanding industrial environments where resistance to heat, pressure, oxidation, and corrosive media is essential. Manufactured in accordance with DIN 17459 specification, these seamless austenitic steel tubes are produced with controlled chemical composition, mechanical properties, dimensional tolerances, and surface quality to ensure dependable performance under high-temperature and high-pressure service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of DIN 17459 Seamless Austenitic Steel Tubes, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply: Seamless Austenitic Steel Tubes | Seamless Stainless Steel Tubes | High-Temperature Tubes | Heat Exchanger Tubes | Boiler Tubes | Pressure Tubes | Process Tubes | Precision Tubes | Thin Wall Tubes | Cut-to-Length Tubes Available Grades (DIN 17459): X10CrNiTi189 | X10CrNiNb189 | X10CrNiMoTi1810 | X10CrNiMoNb1810 | X15CrNiSi2520 | X15CrNiSi2520 Nb | X10CrNiMoVNb1110 | X8CrNiMoVNb1613 | X6CrNiMoTi17122 Mechanical Properties: • High tensile and yield strength • Excellent creep resistance • Good toughness and ductility • Excellent resistance to oxidation • Superior resistance to elevated temperatures • Good weldability and fabrication characteristics • Reliable performance under high-pressure service conditions • Mechanical properties vary according to grade, dimensions, and delivery condition Key Features: • Excellent high-temperature performance • Superior corrosion and oxidation resistance • High mechanical strength • Excellent creep and stress resistance • Good toughness and ductility • Reliable weldability • Excellent dimensional accuracy • Suitable for severe service conditions • Long service life Material Characteristics: DIN 17459 Seamless Austenitic Steel Tubes provide an excellent combination of high-temperature strength, corrosion resistance, oxidation resistance, toughness, and durability. Their austenitic alloy composition makes them suitable for demanding applications involving elevated temperatures, pressure, corrosive media, and prolonged service exposure. Applications: • Power Generation Plants • Boilers • Superheater Systems • Heat Exchangers • Petrochemical Plants • Chemical Processing Equipment • High-Temperature Process Piping • Pressure Equipment • Furnace Components • Refinery Equipment • Steam Systems • General High-Temperature Engineering Applications Conclusion: Ladhani Metal Corporation supplies DIN 17459 Seamless Austenitic Steel Tubes in various grades with customized outside diameters, wall thicknesses, lengths, finishes, and specifications. These seamless tubes provide excellent high-temperature strength, corrosion resistance, oxidation resistance, toughness, and long-term durability for power generation, petrochemical, chemical processing, refinery, boiler, heat exchanger, and high-temperature engineering applications. For stock availability, customized sizes, or technical requirements, contact Ladhani Metal Corporation. #DIN17459 #DIN17459Tubes #DIN17459StainlessSteel #DIN17459SeamlessTubes #DIN17459SeamlessStainlessSteelTubes #SeamlessStainlessSteelTubes #StainlessSteelTubes #SeamlessSteelTubes #SSSeamlessTubes #AusteniticStainlessSteelTubes #HighTemperatureTubes #HeatResistantTubes #CorrosionResistantTubes #IndustrialStainlessSteelTubes #HighPressureTubes #HeatExchangerTubes #BoilerTubes #ProcessPipingTubes #ChemicalProcessingTubes #PetrochemicalTubes #OilAndGasTubes #PowerPlantTubes #EngineeringSteelTubes #PrecisionStainlessSteelTubes #StainlessSteelTubeManufacturer #StainlessSteelTubeSupplier #StainlessSteelTubeExporter #DINStandardTubes #LadhaniMetals #StainlessSteelProducts #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad