en10088sheet

EN 10088 SS 1.4462 is a duplex stainless steel combining approximately equal proportions of austenite and ferrite, offering significantly higher strength and superior corrosion resistance compared to standard austenitic grades. This alloy provides excellent resistance to pitting, crevice corrosion, stress corrosion cracking, and general corrosion in chloride-rich and mildly aggressive environments. With good weldability, high toughness, and stable mechanical properties, 1.4462 is widely used in structural, marine, chemical, and industrial applications where durability and reliability are essential. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4462 in sheet, plate, coil, and strip forms. Our sheets are produced using precision rolling, controlled heat treatment, and high-quality finishing methods to ensure excellent flatness, accurate thickness, smooth surface finish, and consistent mechanical properties suitable for demanding engineering and fabrication requirements. Forms Available: sheet, plate, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 21.0 – 23.0 • Nickel (Ni): 4.5 – 6.5 • Molybdenum (Mo): 2.50 – 3.50 • Nitrogen (N): 0.08 – 0.20 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 880 MPa • Yield Strength (0.2% Proof): ≥ 450 MPa • Elongation: ≥ 25% • Hardness: typically 230 – 270 HB Key Features: • High mechanical strength from duplex microstructure • Excellent resistance to pitting and crevice corrosion • Strong resistance to stress corrosion cracking in chloride environments • Good weldability and formability for industrial fabrication • High toughness and dimensional stability across a wide temperature range • Smooth, clean surface suitable for structural and process applications Material Characteristics: EN 10088 SS 1.4462 Sheet features a balanced austenitic-ferritic structure that provides a strong combination of high strength and enhanced corrosion resistance. The increased chromium, molybdenum, and nitrogen content ensures reliable performance in marine, chemical, and chloride-exposed environments. With consistent dimensional accuracy and stable mechanical behavior, this material is ideal for components requiring long-term durability and corrosion-resistant service. Applications: • Marine environments, offshore platforms, and seawater systems • Chemical and petrochemical processing equipment • Structural components and load-bearing assemblies • Heat exchangers, pressure vessels, and industrial piping • Desalination plants and brackish water systems • Architectural and precision-engineered components Conclusion: Ladhani Metal Corporation supplies superior-quality EN 10088 SS 1.4462 Sheet designed for exceptional strength, corrosion resistance, and long-term performance. Manufactured to international standards, these sheets are ideal for marine, chemical, structural, and industrial applications. For customized sheet sizes, technical assistance, or support with material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials

EN 10088 SS 1.4529 is a super-austenitic stainless steel with exceptionally high nickel, chromium, molybdenum, and nitrogen content, offering outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking. This grade is specifically engineered for highly aggressive environments containing chlorides, acids, and seawater. It provides superior strength, excellent toughness, and stable performance across a wide temperature range, making it ideal for critical applications where maximum corrosion resistance and long-term reliability are essential. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4529 in plate, sheet, coil, and strip forms. Our plates are produced through precision rolling, carefully controlled annealing, and high-quality finishing processes to ensure accurate dimensions, excellent surface quality, and consistent mechanical properties suitable for demanding industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.020 • Silicon (Si): ≤ 0.70 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.010 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 6.0 – 7.0 • Nitrogen (N): 0.15 – 0.25 • Copper (Cu): 0.5 – 1.5 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 850 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 200 – 230 HB Key Features: • Exceptional resistance to pitting and crevice corrosion due to high Mo, Ni, and N content • Excellent stress corrosion cracking resistance in chloride-bearing environments • High strength with superior toughness across wide temperature variations • Very good weldability and formability for complex fabrication • Smooth, high-quality surface for hygienic and high-purity applications • Reliable long-term performance in highly corrosive and demanding service conditions Material Characteristics: EN 10088 SS 1.4529 Plate features a super-austenitic microstructure engineered to deliver maximum corrosion resistance and robust mechanical stability. The enhanced alloy content ensures excellent resistance to localized corrosion, aggressive chemicals, and seawater exposure. The grade offers outstanding dimensional stability and long-lasting durability, making it suitable for critical industrial components and precision fabrication. Applications: • Chemical and petrochemical processing plants • Marine and offshore structures exposed to seawater • Desalination systems and brine handling equipment • Pharmaceutical and food processing machinery • Heat exchangers, evaporators, and industrial piping • High-performance components for corrosive or extreme environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4529 Plate manufactured to deliver superior corrosion resistance, high mechanical strength, and long-lasting service performance. Designed to meet international standards, these plates are suitable for chemical, marine, desalination, and heavy industrial applications. For customized plate sizes, technical support, or assistance with material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects

EN 10088 SS 1.4547 is a super-austenitic stainless steel known for its exceptional resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. With very high levels of nickel, molybdenum, and chromium, this grade delivers outstanding performance in extremely aggressive environments such as seawater, chemical processing systems, and acidic media. Its stable austenitic microstructure ensures excellent toughness, high strength, and reliable corrosion resistance across wide temperature ranges. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of EN 10088 SS 1.4547 in strip, sheet, plate, and coil forms. Our strips are produced through precision rolling, proper annealing, and high-quality finishing to achieve consistent thickness, superior flatness, and excellent surface quality suitable for demanding industrial applications. Forms Available: strip, sheet, plate, coil Chemical Composition (%): • Carbon (C): ≤ 0.020 • Silicon (Si): ≤ 0.70 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.010 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 6.0 – 7.0 • Nitrogen (N): 0.18 – 0.25 • Copper (Cu): 0.5 – 1.0 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 850 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 200 – 230 HB Key Features: • Exceptional resistance to pitting and crevice corrosion due to very high Mo and Ni content • Superior performance in chloride-rich and highly aggressive chemical environments • Excellent toughness and mechanical strength across a broad temperature range • Very good weldability and formability for precision strip applications • High-purity surface finish suitable for hygienic and process-critical industries • Outstanding long-term stability in severe and corrosive service conditions Material Characteristics: EN 10088 SS 1.4547 Strip is engineered with a super-austenitic alloy composition that offers maximum localized corrosion resistance, especially in chloride-bearing environments. The optimized balance of nickel, molybdenum, chromium, and nitrogen ensures excellent structural stability, high mechanical strength, and reliable fabrication performance. This material is ideal for applications requiring extreme corrosion resistance and continuous operation in harsh industrial atmospheres. Applications: • Seawater desalination and marine engineering equipment • Chemical and petrochemical processing systems • Pharmaceutical and hygienic-grade process equipment • Heat exchangers, evaporators, and high-corrosion piping • Food processing and specialty industrial components • High-performance mechanical and structural parts in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4547 Strip designed for outstanding corrosion resistance, high mechanical strength, and long-term durability. Manufactured to international quality standards, these strips are suitable for marine, chemical, pharmaceutical, and heavy industrial applications. For customized strip sizes, technical assistance, or help in selecting the appropriate grade, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips

EN 10088 SS 1.4537 is a high-alloy austenitic stainless steel engineered for superior resistance to pitting, crevice corrosion, and chloride-induced attack. The grade contains elevated levels of nickel, molybdenum, and manganese, resulting in excellent localized corrosion resistance and dependable performance in aggressive industrial, marine, and chemical environments. Its stable austenitic structure provides high toughness, excellent workability, and reliable behavior across varied temperatures, making 1.4537 suitable for demanding process applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4537 in coil, sheet, plate, and strip forms. Our coils are produced through controlled rolling, annealing, and precision finishing processes to ensure uniform thickness, smooth surfaces, and tight dimensional tolerances required for advanced fabrication and industrial operations. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): 1.50 – 2.50 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 11.5 – 13.5 • Molybdenum (Mo): 2.0 – 3.0 • Nitrogen (N): ≤ 0.20 Mechanical Properties (Annealed Condition): • Tensile Strength: 550 – 750 MPa • Yield Strength (0.2% Proof): ≥ 230 MPa • Elongation: ≥ 35% • Hardness: typically 180 – 210 HB Key Features: • Strong resistance to pitting and crevice corrosion in chloride-bearing media • Reliable performance in chemical, marine, and industrial processing environments • Good weldability and formability for coils used in fabrication and component manufacturing • Stable austenitic structure ensuring toughness at both high and low temperatures • Smooth and consistent surface finish suitable for precision processing • Excellent long-term durability in corrosive and fluctuating operating conditions Material Characteristics: EN 10088 SS 1.4537 Coil features an alloy composition optimized for high resistance to localized corrosion and mechanical stability. The addition of molybdenum and manganese enhances pitting resistance, while nickel content stabilizes the austenitic matrix, ensuring superior toughness and fabrication properties. This grade offers consistent corrosion resistance across a wide temperature range, making it ideal for advanced industrial systems and demanding service environments. Applications: • Chemical processing equipment and piping • Food and beverage industry components • Marine and offshore engineering systems • Heat exchangers, evaporators, and industrial tubing • Process equipment exposed to chlorides or mild acids • Precision-formed components and fabricated structures Conclusion: Ladhani Metal Corporation offers high-quality EN 10088 SS 1.4537 Coil designed for excellent corrosion resistance, dependable mechanical strength, and long-term serviceability. Manufactured to global standards, these coils are ideal for chemical, marine, food-processing, and industrial applications. For customized coil dimensions, technical support, or assistance in selecting the right material grade, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel

EN 10088 SS 1.4597 is a high-alloy austenitic stainless steel engineered for superior resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride-rich and chemically aggressive environments. With elevated levels of chromium, nickel, molybdenum, and nitrogen, this grade offers exceptional corrosion resistance combined with high mechanical strength and stable performance across a wide temperature range. Its excellent toughness, good weldability, and reliable long-term durability make 1.4597 suitable for critical applications where standard stainless steels may not provide adequate corrosion protection. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4597 in sheet, plate, coil, and strip forms. Our sheets are produced using precision rolling, controlled heat treatment, and superior finishing processes to ensure excellent flatness, accurate dimensional tolerances, and consistent mechanical properties suitable for demanding marine, chemical, and industrial applications. Forms Available: sheet, plate, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 0.70 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.010 • Chromium (Cr): 19.5 – 21.5 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 6.0 – 7.0 • Nitrogen (N): 0.15 – 0.25 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 850 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 200 – 230 HB Key Features: • Exceptional resistance to pitting and crevice corrosion due to high Mo and N content • Excellent performance in chloride-rich and aggressive chemical environments • High mechanical strength with stable toughness across temperature variations • Very good weldability and formability for fabrication processes • Smooth, clean surface finish suitable for hygienic and critical industrial applications • Reliable long-term durability under severe service conditions Material Characteristics: EN 10088 SS 1.4597 Sheet features a highly alloyed austenitic microstructure designed to deliver premium corrosion resistance and strong mechanical performance in the harshest environments. The high levels of nickel, molybdenum, and nitrogen ensure resistance to localized corrosion and stress-induced damage, making this grade ideal for critical components in chemical, marine, and high-performance engineering applications. The material provides excellent dimensional stability, making it suitable for precision fabrication and long-term operational reliability. Applications: • Chemical and petrochemical processing equipment • Marine and offshore structural components • Pharmaceutical and hygienic processing systems • Heat exchangers, condensers, and process piping • High-performance industrial machinery and parts • Structural elements in harsh or corrosive environments Conclusion: Ladhani Metal Corporation supplies superior-quality EN 10088 SS 1.4597 Sheet manufactured for exceptional corrosion resistance, high strength, and dependable long-term performance. Produced to international standards, these sheets are ideal for chemical, marine, pharmaceutical, and advanced industrial applications. For customized sheet dimensions, technical support, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters

EN 10088 SS 1.4373 is a chromium–nickel–manganese stainless steel offering a balanced combination of corrosion resistance, mechanical strength, and good fabricability. The grade provides stable performance in mildly to moderately corrosive environments and is known for its good toughness, formability, and weldability. With a durable austenitic structure and reliable mechanical properties, 1.4373 is suitable for applications requiring cost-effective corrosion resistance and consistent fabrication characteristics. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4373 in strip, sheet, plate, and coil forms. Our strips are produced through precision cold rolling, controlled annealing, and high-quality finishing processes to ensure excellent surface quality, accurate thickness control, and consistent mechanical properties tailored for industrial and engineering applications. Forms Available: strip, sheet, plate, coil Chemical Composition (%): • Carbon (C): ≤ 0.080 • Silicon (Si): ≤ 1.00 • Manganese (Mn): 5.50 – 7.50 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 1.50 – 3.50 • Nitrogen (N): ≤ 0.110 Mechanical Properties (Annealed Condition): • Tensile Strength: 600 – 800 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 160 – 200 HB Key Features: • Good general corrosion resistance in industrial and atmospheric environments • High manganese content enhances strength and work-hardening ability • Good weldability and formability for fabrication processes • Stable mechanical properties with good toughness • Smooth surface finish suitable for precision components • Suitable for cost-effective engineering and industrial applications Material Characteristics: EN 10088 SS 1.4373 Strip features an austenitic microstructure with increased manganese content, providing enhanced strength and work-hardening capacity while maintaining good corrosion resistance. The material offers excellent formability and weldability, making it suitable for stamped, formed, or fabricated parts used in diverse industrial applications. Its balanced alloy composition ensures stable mechanical behavior and reliable performance under moderate service conditions. Applications: • Automotive components and exhaust system parts • Food and beverage processing equipment • Industrial and mechanical fabrication • Structural and architectural applications • Process equipment and storage systems • General engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4373 Strip designed for dependable corrosion resistance, strong mechanical performance, and excellent fabricability. Manufactured to international standards, these strips are ideal for industrial, automotive, architectural, and engineering applications. For custom strip sizes, technical support, or assistance with material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4438 is a high-alloy austenitic stainless steel containing increased levels of nickel and molybdenum, providing exceptional corrosion resistance in chloride-rich, marine, and chemically aggressive environments. This grade offers superior resistance to pitting, crevice corrosion, and stress corrosion cracking while maintaining excellent toughness, strong mechanical properties, and stable performance across a wide temperature range. With reliable weldability, formability, and long-term durability, 1.4438 is ideal for applications requiring premium corrosion resistance and high structural integrity. Ladhani Metal Corporation is a reputable manufacturer, supplier, and exporter of EN 10088 SS 1.4438 in plate, sheet, coil, and strip forms. Our plates are produced through precision rolling, controlled annealing, and high-quality finishing processes to ensure excellent flatness, dimensional accuracy, and consistent mechanical properties suitable for marine, chemical, and industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 12.5 – 15.0 • Molybdenum (Mo): 2.50 – 3.00 • Nitrogen (N): ≤ 0.110 Mechanical Properties (Annealed Condition): • Tensile Strength: 550 – 750 MPa • Yield Strength (0.2% Proof): ≥ 230 MPa • Elongation: ≥ 40% • Hardness: typically 160 – 190 HB Key Features: • Excellent resistance to pitting, crevice corrosion, and chloride-induced corrosion • High toughness and stable mechanical properties across temperature variations • Very good weldability and formability for fabrication and processing • Superior performance in marine and chemically aggressive environments • Smooth, clean surface finish ideal for hygienic and aesthetic applications • Reliable long-term durability in demanding industrial service conditions Material Characteristics: EN 10088 SS 1.4438 Plate features a robust, high-alloy austenitic microstructure designed to deliver exceptional corrosion resistance and high mechanical stability. The increased nickel and molybdenum content enhances resistance to localized corrosion and stress-related degradation, making it suitable for environments where standard stainless steels may underperform. The material offers excellent dimensional consistency, making it ideal for precision fabrication and long-term industrial use. Applications: • Marine structures, seawater systems, and offshore equipment • Chemical and petrochemical processing plants • Food, beverage, and pharmaceutical processing machinery • Heat exchangers, condensers, and industrial piping • Architectural and structural components • Precision-engineered and fabricated industrial parts Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4438 Plate engineered for superior corrosion resistance, mechanical durability, and long-lasting performance. Manufactured to international standards, these plates are suitable for marine, chemical, hygienic, and industrial applications. For customized plate sizes, technical assistance, or guidance in selecting the right grade, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication

EN 10088 SS 1.4580 is a high-alloy austenitic stainless steel designed for exceptional resistance to strong acids, chlorides, and highly corrosive industrial environments. With increased chromium, nickel, molybdenum, and copper content, this grade provides superior resistance to both uniform and localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking. It also offers good mechanical strength, thermal stability, and excellent performance in reducing and oxidizing media, making it suitable for harsh chemical processing applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4580 in plate, sheet, coil, and strip forms. Our plates are manufactured through precision hot rolling, controlled heat treatment, and superior finishing to ensure excellent dimensional accuracy, flatness, and consistent mechanical properties suited for demanding industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.010 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 4.0 – 5.0 • Copper (Cu): 1.00 – 2.00 • Nitrogen (N): 0.10 – 0.20 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 900 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 180 – 220 HB Key Features: • Excellent resistance to strong organic and inorganic acids • High corrosion resistance in chloride-rich and reducing environments • Strong resistance to pitting, crevice corrosion, and stress corrosion cracking • Good weldability and formability despite high alloy content • Stable mechanical properties at elevated temperatures • Reliable long-term performance in aggressive industrial conditions Material Characteristics: EN 10088 SS 1.4580 Plate features a highly alloyed austenitic microstructure engineered to withstand extremely corrosive service environments. Its high nickel, molybdenum, and copper content enhances resistance to localized attack and ensures structural stability even under fluctuating temperatures and pressures. The material offers consistent mechanical performance, dimensional stability, and high reliability for critical chemical and industrial applications . Applications: • Chemical and petrochemical processing equipment • Acid storage tanks, reactors, and pressure vessels • Piping systems for aggressive chemicals and chloride solutions • Pharmaceutical and fertilizer industry process equipment • Heat exchangers, evaporators, and industrial processing units • Marine, offshore, and pollution control systems exposed to harsh environments Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4580 Plate designed for excellent corrosion resistance, mechanical durability, and long-lasting service in severe chemical and industrial environments. Produced to international standards, these plates are ideal for demanding applications requiring superior alloy performance. For custom plate dimensions, technical assistance, or guidance in grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects

EN 10088 SS 1.4550 is a niobium-stabilized austenitic stainless steel developed for superior resistance to intergranular corrosion, particularly after welding or exposure to elevated temperatures. The stabilization effect prevents carbide precipitation, ensuring long-term reliability in high-temperature and corrosive operating conditions. This grade offers excellent creep strength, oxidation resistance, and consistent mechanical performance, making it suitable for thermal processing systems, structural components, and industrial applications requiring strength and heat resistance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4550 in strip, coil, sheet, and plate forms. Our strips are produced through precision cold rolling, controlled annealing, and high-quality finishing to ensure accurate dimensions, uniform mechanical properties, and excellent surface quality suitable for fabrication and industrial use. Forms Available: strip, coil, sheet, plate Chemical Composition (%): • Carbon (C): ≤ 0.080 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 12.0 • Niobium (Nb): ≥ 10 × C (typically 0.80 – 1.00) Mechanical Properties (Annealed Condition): • Tensile Strength: 500 – 750 MPa • Yield Strength (0.2% Proof): ≥ 230 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 190 HB Key Features: • Excellent resistance to intergranular corrosion after welding • Strong performance in high-temperature and oxidizing environments • Good weldability and formability • High creep and stress rupture strength • Stable mechanical properties under thermal cycling • Clean surface finish suitable for industrial and structural applications Material Characteristics: EN 10088 SS 1.4550 Strip provides a stable austenitic microstructure with niobium stabilization to prevent carbide formation under heat exposure. The material maintains long-term integrity in high-temperature service, offering reliable resistance to corrosion and oxidation. Its dimensional stability, mechanical strength, and fabrication-friendly nature make it suitable for demanding industrial environments. Applications: • Heat exchangers, boilers, and superheater components • Chemical and petrochemical processing equipment • High-temperature fluid handling systems • Refinery piping and structural parts • Thermal processing machinery • General engineering and fabrication uses Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4550 Strip manufactured for heat resistance, corrosion protection, and long-term durability. Produced to international standards, this material is ideal for chemical, thermal processing, and industrial applications. For customized strip dimensions, technical assistance, or grade selection support, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4335 is a chromium-nickel-molybdenum austenitic stainless steel designed for improved corrosion resistance, high strength, and excellent performance in mildly aggressive chemical and chloride-containing environments. The addition of molybdenum enhances resistance to pitting and crevice corrosion, while the alloy maintains good formability, weldability, and stable mechanical properties across a wide temperature range. This grade is suitable for precision engineering, chemical processing, and structural applications requiring durability and corrosion resistance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4335 in coil, sheet, plate, and strip forms. Our coils are produced through precision cold rolling, controlled annealing, and superior surface finishing to ensure accurate dimensions, consistent mechanical properties, and excellent surface quality suitable for industrial and fabrication needs. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.0 – 18.5 • Nickel (Ni): 11.0 – 13.0 • Molybdenum (Mo): 2.00 – 2.50 Mechanical Properties (Annealed Condition): • Tensile Strength: 550 – 750 MPa • Yield Strength (0.2% Proof): ≥ 230 MPa • Elongation: ≥ 40% • Hardness: typically 160 – 190 HB Key Features: • Enhanced corrosion resistance due to molybdenum content • Good performance in chloride-containing and mildly aggressive chemical environments • Excellent weldability and formability • High toughness and stable mechanical properties • Smooth and clean surface finish suitable for hygienic and structural applications • Reliable strength and durability in industrial service conditions Material Characteristics: EN 10088 SS 1.4335 Coil features a robust austenitic microstructure with improved alloy content to ensure dependable corrosion protection and strong mechanical performance. Its molybdenum-enhanced composition provides resistance to localized corrosion, while consistent dimensional stability makes it suitable for precision fabrication. The grade is used in settings requiring long-term reliability, weldability, and resistance to environmental exposure. Applications: • Chemical and petrochemical processing equipment • Food and pharmaceutical industry machinery • Marine and coastal structural components • Heat exchangers, condensers, and process piping • Architectural cladding and structural elements • General engineering and fabrication applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4335 Coil manufactured for superior corrosion resistance, mechanical stability, and long-lasting durability. Produced to international standards, these coils are ideal for chemical, marine, architectural, and industrial applications. For custom coil dimensions, technical support, or help with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4315 is an austenitic stainless steel grade alloyed with increased levels of manganese and nitrogen to enhance strength, toughness, and corrosion resistance. The combination of these alloying elements provides improved mechanical performance and excellent stability in mildly corrosive environments. This grade offers good formability, reliable weldability, and dependable performance across a broad temperature range, making it suitable for engineering, structural, and process applications where both strength and corrosion resistance are required. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4315 in plate, sheet, coil, and strip forms. Our plates are produced through precision rolling, controlled annealing, and high-quality surface finishing to ensure excellent flatness, dimensional accuracy, and consistent mechanical properties suitable for industrial and fabrication requirements. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): 5.50 – 7.50 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.0 – 18.5 • Nickel (Ni): 3.50 – 5.50 • Nitrogen (N): 0.20 – 0.40 Mechanical Properties (Annealed Condition): • Tensile Strength: 600 – 800 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 40% • Hardness: typically 160 – 190 HB Key Features: • High strength due to nitrogen and manganese additions • Good corrosion resistance in atmospheric and mildly corrosive environments • Excellent toughness and ductility • Good weldability and formability for fabrication • Stable mechanical properties across wide temperature ranges • Suitable for load-bearing and structural applications Material Characteristics: EN 10088 SS 1.4315 Plate features a nitrogen-strengthened austenitic microstructure that delivers enhanced mechanical performance without compromising corrosion resistance. The grade maintains good structural stability, clean surface quality, and reliable strength, making it suitable for industrial components, fabricated structures, and equipment operating in mild to moderate corrosive conditions. Applications: • Structural and load-bearing components • Industrial machinery and equipment • Food processing and hygienic applications • Architectural elements and fabricated assemblies • Chemical and process industry components • Tanks, piping, and general engineering fabrications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4315 Plate designed for enhanced strength, corrosion resistance, and long-term durability. Manufactured to international standards, these plates are ideal for engineering, structural, and industrial applications. For customized plate dimensions, technical guidance, or assistance with material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4319 is a nickel-enhanced austenitic stainless steel designed to provide improved corrosion resistance, excellent toughness, and stable mechanical properties across a wide temperature range. With higher nickel content compared to standard austenitic grades, it offers superior resistance to chemical attack, chloride-induced corrosion, and atmospheric exposure. The grade also provides good weldability, excellent formability, and reliable performance in both industrial and hygienic environments. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4319 in sheet, plate, coil, and strip forms. Our sheets are produced using precision cold rolling, controlled annealing, and high-quality finishing to ensure excellent flatness, clean surfaces, and accurate dimensions suitable for chemical, architectural, and engineering applications. Forms Available: sheet, plate, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 12.5 – 15.0 • Nitrogen (N): ≤ 0.110 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Enhanced corrosion resistance due to higher nickel content • Excellent formability and weldability • Stable mechanical properties across varied temperatures • Good resistance to chloride-containing environments • Smooth surface finish suitable for hygienic applications • Reliable toughness and structural durability Material Characteristics: EN 10088 SS 1.4319 Sheet features a refined austenitic microstructure designed to improve resistance to corrosion and provide consistent mechanical performance. The elevated nickel content enhances stability in chemical and marine environments, while the alloy’s good ductility allows easy fabrication. This grade is preferred for applications requiring long-term reliability, clean surfaces, and excellent corrosion protection. Applications: • Chemical and petrochemical processing equipment • Pharmaceutical and food industry machinery • Marine fittings and components • Architectural panels and decorative structures • Heat exchangers, condensers, and piping systems • General engineering and fabrication projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4319 Sheet engineered for superior corrosion resistance, excellent fabrication properties, and long-lasting performance. Manufactured to international quality standards, these sheets are ideal for chemical, marine, architectural, and industrial applications. For custom sheet dimensions, technical support, or assistance in grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4539 is a highly alloyed, super austenitic stainless steel engineered for exceptional corrosion resistance in the most aggressive environments. With elevated levels of chromium, nickel, molybdenum, and copper, this grade offers outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking, even in strong chloride, acidic, and seawater conditions. It maintains excellent mechanical strength, high toughness, and reliable performance across a wide temperature range, making it ideal for demanding industrial applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4539 in strip, sheet, plate, and coil forms. Our strips are produced using precision rolling, controlled annealing, and superior surface finishing to ensure excellent dimensional accuracy, smooth surfaces, and consistent mechanical properties suitable for corrosive process environments and high-performance engineering uses. Forms Available: strip, sheet, plate, coil Chemical Composition (%): • Carbon (C): ≤ 0.020 • Silicon (Si): ≤ 0.70 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 6.00 – 7.00 • Copper (Cu): 1.20 – 2.00 • Nitrogen (N): ≤ 0.150 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 850 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 170 – 200 HB Key Features: • Exceptional resistance to pitting and crevice corrosion • Highly stable in chloride-rich and strongly acidic environments • Excellent stress corrosion cracking resistance • Strong mechanical properties and high toughness • Good weldability despite high alloy content • Suitable for highly corrosive industrial processes Material Characteristics: EN 10088 SS 1.4539 Strip features a robust super-austenitic microstructure with high levels of nickel, molybdenum, and copper to ensure unmatched resistance to localized corrosion and aggressive chemicals. The grade provides excellent structural integrity, stable mechanical performance, and dependable corrosion resistance even in reducing and oxidizing environments. Its precision-rolled finish and dimensional accuracy make it suitable for demanding fabrication and process applications. Applications: • Chemical and petrochemical processing plants • Seawater desalination and marine engineering systems • Flue gas desulfurization equipment • Pharmaceutical and food processing machinery • Heat exchangers, condensers, and pressure vessels • Acid-handling equipment and industrial piping Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4539 Strip engineered for extreme corrosion resistance, reliable mechanical strength, and long-term performance in the most challenging environments. Manufactured to international standards, these strips are ideal for chemical, marine, pharmaceutical, and industrial applications. For custom strip dimensions, technical guidance, or help with material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4439 is a high-alloy austenitic stainless steel containing elevated levels of molybdenum and nickel, offering outstanding resistance to pitting, crevice corrosion, and chemical attack in highly aggressive environments. With enhanced PREN values, excellent structural stability, and reliable performance in chloride-rich, acidic, and industrial media, this grade is preferred for critical applications demanding long-term corrosion resistance and mechanical reliability. It also provides good weldability, strong toughness, and dependable behavior across a wide temperature range. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4439 in coil, sheet, plate, and strip forms. Our coils are produced using precision cold rolling, controlled heat treatment, and superior surface finishing to ensure excellent dimensional accuracy, high purity, and consistent mechanical properties suitable for chemical, marine, and process industries. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.020 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 6.0 – 8.0 • Molybdenum (Mo): 2.50 – 3.50 • Nitrogen (N): ≤ 0.200 Mechanical Properties (Annealed Condition): • Tensile Strength: 530 – 750 MPa • Yield Strength (0.2% Proof): ≥ 240 MPa • Elongation: ≥ 40% • Hardness: typically 160 – 190 HB Key Features: • Excellent resistance to pitting and crevice corrosion • High molybdenum content for aggressive chloride environments • Strong mechanical properties with high toughness • Good weldability and stability during fabrication • Resistant to acidic and industrial chemical exposure • Reliable performance in both low and elevated temperatures Material Characteristics: EN 10088 SS 1.4439 Coil features a highly alloyed austenitic microstructure engineered for superior corrosion resistance and structural durability. The combination of high chromium, nickel, and molybdenum levels enhances resistance to localized corrosion and ensures excellent strength retention. Its high purity, clean surface, and stable mechanical behavior make it ideal for demanding process environments and precision-engineered systems. Applications: • Chemical and petrochemical processing plants • Seawater and desalination systems • Pharmaceutical and hygienic processing equipment • Heat exchangers, evaporators, and pressure vessels • Marine engineering and offshore components • Piping, tanks, and industrial fabrication Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4439 Coil designed for exceptional corrosion resistance, mechanical stability, and long-term industrial performance. Manufactured to international standards, these coils are suitable for chemical, marine, pharmaceutical, and process industry applications. For custom coil dimensions, technical guidance, or assistance with material selection, contact Ladhani Metal Corporation.

EN 10088 SS 1.4435 is a high-molybdenum austenitic stainless steel offering exceptional corrosion resistance, particularly in chloride-rich, acidic, and chemically aggressive environments. With increased molybdenum and nickel content compared to standard 316/316L grades, it provides superior pitting and crevice corrosion resistance, improved chemical stability, and excellent cleanliness. The grade also offers very good weldability, high toughness, and reliable performance in both low- and high-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4435 in plate, sheet, coil, and strip forms. Our plates are produced using precision rolling, solution annealing, and strict surface finishing to ensure excellent flatness, dimensional accuracy, and a smooth, clean surface suitable for hygienic, chemical, and high-performance industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 12.5 – 15.0 • Molybdenum (Mo): 2.50 – 3.00 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Exceptional pitting and crevice corrosion resistance • Increased molybdenum content for improved performance in chloride media • High purity and excellent surface cleanliness • Very good weldability and formability • Stable mechanical properties and high toughness • Suitable for demanding chemical and pharmaceutical applications Material Characteristics: EN 10088 SS 1.4435 Plate features an austenitic microstructure with enhanced molybdenum and nickel content, offering reliable resistance to aggressive chemical attack and harsh environments. Its purity and low carbon content ensure excellent weldability with minimal risk of sensitization. The material is ideal for hygienic, corrosive, and high-performance applications requiring long service life and consistent structural integrity. Applications: • Pharmaceutical and biotechnology equipment • Chemical and petrochemical plant components • Food and beverage processing machinery • Heat exchangers, reactors, and processing vessels • Marine applications and chloride-exposed structures • Piping systems, tanks, and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4435 Plate engineered for superior corrosion resistance, high purity, and dependable fabrication performance. Manufactured to international standards, these plates are ideal for pharmaceutical, chemical, marine, and industrial applications. For customized plate dimensions, material recommendations, or technical assistance, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4432 is a molybdenum-alloyed austenitic stainless steel offering superior corrosion resistance, especially in chloride-containing environments. With slightly higher molybdenum content compared to standard grades, it provides enhanced resistance to pitting, crevice corrosion, and chemical attack. The material exhibits excellent weldability, good formability, and stable mechanical properties, making it suitable for demanding industrial, marine, and hygienic applications. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4432 in sheet, plate, coil, and strip forms. Our sheets are produced through precision rolling, controlled annealing, and fine surface finishing to ensure excellent flatness, dimensional accuracy, and consistent mechanical properties. These sheets are ideal for fabrication, processing equipment, and structural applications across various industries. Forms Available: sheet, plate, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.50 – 3.00 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Superior corrosion resistance in marine and chloride environments • Enhanced pitting and crevice corrosion resistance due to higher molybdenum • Good weldability and formability for various fabrication needs • Stable mechanical properties and high toughness • Smooth, clean surface suitable for hygienic and decorative applications Material Characteristics: EN 10088 SS 1.4432 Sheet features a robust austenitic microstructure enriched with increased molybdenum content, resulting in strong resistance to aggressive environments, chemical exposure, and chloride attack. Its excellent formability, weldability, and toughness make it suitable for complex fabrication and long-term industrial use. The consistent surface finish and dimensional uniformity ensure reliable performance in hygienic, chemical, and marine settings. Applications: • Marine equipment and seawater-exposed structures • Chemical and petrochemical processing systems • Food and pharmaceutical industry equipment • Heat exchangers, condensers, and process piping • Architectural cladding and decorative components • Tanks, vessels, and general engineering applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4432 Sheet designed for enhanced corrosion resistance, fabrication efficiency, and long-term durability. Manufactured to international standards, these sheets are ideal for marine, chemical, pharmaceutical, and industrial applications. For custom sheet dimensions, technical support, or guidance in material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4401 is a molybdenum-alloyed austenitic stainless steel offering excellent corrosion resistance, particularly against pitting and crevice corrosion in chloride-containing environments. With a stable austenitic structure, good mechanical strength, and strong resistance to chemical attack, this grade is widely used in marine, chemical, and hygienic applications. It provides good weldability, high toughness, and reliable performance in both ambient and low-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4401 in coil, sheet, plate, and strip forms. Our coils are produced using precision hot and cold rolling, controlled annealing, and high-quality finishing to ensure excellent dimensional accuracy, consistent mechanical properties, and a smooth, clean surface suitable for industrial, architectural, and process applications. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.070 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.00 – 2.50 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Excellent corrosion resistance in marine and chloride environments • Strong resistance to pitting and crevice corrosion due to molybdenum • Good weldability and formability for fabrication and processing • High toughness at a wide range of temperatures • Smooth surface finish suitable for hygienic and aesthetic applications Material Characteristics: EN 10088 SS 1.4401 Coil features a robust austenitic microstructure enriched with molybdenum for superior corrosion resistance and stable mechanical behavior. The grade performs reliably in environments exposed to chemicals, seawater, and moisture, while its good weldability and formability make it suitable for complex fabrication. Its consistent surface finish and dimensional stability make it ideal for process equipment, structural components, and hygienic installations. Applications: • Marine equipment, seawater piping, and offshore structures • Chemical and petrochemical processing systems • Pharmaceutical and food processing machinery • Architectural components and decorative applications • Heat exchangers, condensers, and industrial piping • Tanks, vessels, and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4401 Coil designed for exceptional corrosion resistance, fabrication ease, and long-lasting performance. Manufactured to international standards, these coils are suitable for marine, chemical, hygienic, and industrial sectors. For custom coil sizes, technical assistance, or help in grade selection, contact Ladhani Metal Corporation.

EN 10088 SS 1.4406 is a fully austenitic, low-carbon molybdenum‐alloyed stainless steel designed for enhanced corrosion resistance, especially in chloride-rich and aggressive chemical environments. With its very low carbon content, the grade provides excellent weldability and superior resistance to intergranular corrosion even after welding. The presence of molybdenum increases resistance to pitting, crevice corrosion, and general corrosion, making 1.4406 suitable for highly demanding industrial and hygienic applications. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4406 in plate, sheet, coil, and strip forms. Our plates are produced using advanced rolling processes, controlled annealing, and premium finishing to ensure exceptional surface quality, accurate thickness, and consistent mechanical performance suitable for chemical, marine, and engineering applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.00 – 2.50 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Excellent corrosion resistance in chloride and aggressive chemical environments • Superior pitting and crevice corrosion resistance due to molybdenum • Very good weldability with minimal risk of sensitization • High toughness at both ambient and low temperatures • Good formability for bending, shaping, and complex fabrication Material Characteristics: EN 10088 SS 1.4406 Plate features a stable, low-carbon austenitic microstructure that ensures excellent corrosion performance, weldability, and long-term stability in severe environments. Its molybdenum-enhanced composition delivers strong resistance to localized corrosion, making it ideal for industries requiring high purity, cleanliness, and structural reliability. The plate form offers consistent mechanical behavior and is well-suited for tanks, vessels, and engineered systems exposed to harsh operating conditions. Applications: • Chemical and petrochemical processing plants • Marine and seawater handling systems • Pharmaceutical and hygienic processing equipment • Heat exchangers, condensers, and evaporators • Industrial piping, tanks, and pressure vessels • Food processing and high-purity applications Conclusion: Ladhani Metal Corporation supplies premium EN 10088 SS 1.4406 Plate manufactured for top-tier corrosion resistance, fabrication reliability, and performance in harsh environments. Produced to international quality standards, these plates are ideal for chemical, marine, pharmaceutical, and industrial applications. For custom plate dimensions, technical support, or assistance in grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4404 is a low-carbon austenitic stainless steel containing molybdenum, offering excellent corrosion resistance, especially against pitting and crevice corrosion in chloride-containing environments. The low carbon content improves weldability and reduces the risk of carbide precipitation during welding. With high toughness, good mechanical strength, and superior resistance to aggressive environments, 1.4404 is widely used in chemical processing, marine applications, pharmaceuticals, and hygienic industries. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4404 in sheet, plate, coil, and strip forms. Our sheets are produced through precision rolling, controlled annealing, and premium-quality finishing to achieve excellent flatness, smooth surface quality, and consistent mechanical properties suitable for industrial, architectural, and hygienic applications. Forms Available: sheet, plate, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.00 – 2.50 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Excellent resistance to pitting and crevice corrosion due to molybdenum • Superior corrosion resistance in marine and chloride-rich environments • Good weldability with low risk of sensitization • High toughness even at low temperatures • Good formability for bending, shaping, and fabrication Material Characteristics: EN 10088 SS 1.4404 Sheet features a stable austenitic microstructure enriched with molybdenum, enhancing corrosion resistance and ensuring dependable performance under aggressive conditions. The low carbon content ensures structural stability during welding without risk of intergranular corrosion. With uniform mechanical properties and smooth surface finish, the material is ideal for hygienic, industrial, and architectural applications requiring durability and corrosion protection. Applications: • Chemical and petrochemical processing equipment • Marine hardware, seawater systems, and offshore applications • Pharmaceutical and food processing machinery • Heat exchangers, condensers, and piping systems • Architectural components and decorative panels • Tanks, vessels, and general engineering structures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4404 Sheet designed for superior corrosion resistance, weldability, and long-term durability. Manufactured to international standards, these sheets are suitable for chemical, marine, hygienic, and industrial applications. For custom sheet dimensions, technical guidance, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4541 is a titanium-stabilized austenitic stainless steel designed to offer excellent corrosion resistance, superior weldability, and enhanced stability against carbide precipitation. The addition of titanium improves resistance to intergranular corrosion, especially after welding, making this grade suitable for high-temperature service and applications exposed to mildly aggressive environments. With good mechanical strength, thermal stability, and ease of fabrication, 1.4541 is widely used in industrial, chemical, and structural applications requiring long-term reliability. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4541 in strip, sheet, coil, and plate forms. Our strips are produced through precision cold rolling, controlled annealing, and high-quality finishing to ensure accurate thickness, excellent flatness, and consistent mechanical properties suitable for forming, fabrication, and industrial processing applications. Forms Available: strip, sheet, coil, plate Chemical Composition (%): • Carbon (C): ≤ 0.080 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 12.0 • Titanium (Ti): ≥ 5 × C Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness: typically 150 – 180 HB Key Features: • Excellent resistance to intergranular corrosion due to titanium stabilization • Good weldability with reduced risk of sensitization • High corrosion resistance in atmospheric and mild chemical environments • Good formability for bending, rolling, and shaping • Stable mechanical performance at elevated temperatures Material Characteristics: EN 10088 SS 1.4541 Strip features a stabilized austenitic microstructure that ensures resistance to carbide precipitation during welding and high-temperature exposure. The grade maintains excellent ductility, corrosion protection, and mechanical stability, making it suitable for components that require long-term durability and frequent fabrication. Its predictable formability and smooth surface finish make it suitable for precision strip applications. Applications: • Heat exchangers, furnace parts, and high-temperature equipment • Chemical and petrochemical processing components • Industrial fabrication, welded structures, and structural parts • Food processing and pharmaceutical machinery • Automotive exhaust systems and high-temperature assemblies • General engineering and industrial components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4541 Strip manufactured for corrosion resistance, high-temperature stability, and superior weldability. Produced to international standards, these strips are suitable for industrial, chemical, and fabrication applications. For custom strip dimensions, technical support, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4541 is a high-strength martensitic stainless steel alloyed with chromium, molybdenum, and vanadium, offering exceptional hardness, wear resistance, and corrosion resistance after heat treatment. This grade provides superior mechanical performance, high edge retention, and dimensional stability, making it ideal for tools, industrial blades, and components subjected to heavy wear and moderate corrosive environments. 1.4541 responds well to quenching and tempering, developing a hardened martensitic microstructure suitable for demanding engineering applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4541 in coil, sheet, plate, and strip forms. Our coils are produced through controlled hot rolling, precise heat treatment, and high-quality finishing to ensure uniform hardness, accurate thickness, and consistent mechanical properties for industrial, tooling, and engineering applications. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): 0.38 – 0.45 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.5 – 14.5 • Molybdenum (Mo): 0.50 – 1.00 • Vanadium (V): 0.10 – 0.25 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 800 – 1050 MPa • Yield Strength (0.2% Proof): ≥ 500 MPa • Elongation: ≥ 8–12% • Hardness: typically 240 – 300 HB (annealed); up to 56 HRC after hardening Key Features: • High hardness and wear resistance after quenching and tempering • Good corrosion resistance in mildly aggressive environments • Excellent edge retention for cutting and precision tools • Good polishability and machinability for high-performance applications • Stable mechanical performance under heavy loads and stress Material Characteristics: EN 10088 SS 1.4541 Coil features a martensitic microstructure that allows high hardness, toughness, and abrasion resistance after heat treatment. The combination of chromium, molybdenum, and vanadium ensures superior wear performance and dimensional stability. With a fine, uniform grain structure and consistent quenching and tempering response, 1.4541 coils are ideal for industrial tooling, dies, and high-strength mechanical components. Applications: • Industrial knives, cutting tools, and blades • Punches, dies, and stamping tools • Mechanical components and shafts subjected to wear • Automotive and engineering high-strength parts • High-wear industrial equipment and machinery • Precision tools requiring high hardness and durability Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4541 Coil engineered for wear resistance, hardness, and corrosion performance. Manufactured to international standards, these coils are suitable for tooling, industrial, and engineering applications. For custom coil dimensions, technical guidance, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4305 is a low-carbon austenitic stainless steel offering excellent corrosion resistance, superior weldability, and good formability. Its reduced carbon content minimizes the risk of carbide precipitation during welding, improving resistance to intergranular corrosion. With reliable mechanical properties, good toughness, and ease of fabrication, 1.4305 is widely used for welded structures, industrial equipment, and applications requiring clean surfaces and high durability. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4305 in plate, sheet, coil, and strip forms. Our plates are produced using precision rolling, controlled annealing, and high-quality finishing to ensure excellent flatness, surface quality, and dimensional accuracy suitable for engineering, fabrication, and industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 10.0 – 12.0 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 45% • Hardness: typically 150 – 180 HB Key Features: • Excellent corrosion resistance in atmospheric and mildly corrosive environments • Superior weldability with very low risk of sensitization • Good formability suitable for bending, deep drawing, and fabrication • Stable mechanical properties with high toughness • Reduced risk of intergranular corrosion during and after welding Material Characteristics: EN 10088 SS 1.4305 Plate features a stable austenitic microstructure with extra-low carbon content, providing improved resistance to carbide precipitation and intergranular corrosion. The grade offers consistent mechanical strength, excellent toughness, and reliable corrosion performance, making it ideal for welded structures, hygienic equipment, and industrial fabrications requiring durability and long service life. Applications: • Food processing and dairy industry equipment • Chemical and pharmaceutical processing equipment • Architectural cladding, handrails, and structural panels • Storage tanks, piping, and welded structures • Kitchen equipment, sinks, and appliances • Automotive and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4305 Plate designed for superior corrosion resistance, weldability, and fabrication performance. Manufactured to international standards, these plates are ideal for industrial, hygienic, and structural applications. For custom plate dimensions, technical support, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4301 is a widely used austenitic stainless steel offering excellent corrosion resistance, good mechanical strength, and outstanding formability. With a balanced composition of chromium and nickel, this grade provides reliable performance in atmospheric, mildly corrosive, and hygienic environments. It is easy to weld, fabricate, and polish, making it suitable for applications that require both durability and aesthetic appeal. SS 1.4301 sheets are commonly used in food processing, architectural components, chemical equipment, and general engineering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4301 in sheet, plate, coil, and strip forms. Our sheets are produced using precision rolling, controlled annealing, and high-quality surface finishing to ensure excellent flatness, clean appearance, and dimensional accuracy required for industrial and decorative applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.070 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.5 – 19.5 • Nickel (Ni): 8.0 – 10.5 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 45% • Hardness: typically 150 – 180 HB Key Features: • Excellent corrosion resistance in atmospheric and mild chemical environments • Very good weldability and fabrication characteristics • Smooth surface finish with excellent aesthetic appearance • High toughness even at low temperatures • Good formability for bending, rolling, and deep drawing Material Characteristics: EN 10088 SS 1.4301 Sheet features a stable austenitic structure providing superior ductility, strength, and corrosion resistance. The grade maintains reliable performance during welding without risk of brittleness, making it suitable for a wide variety of fabricated components. Its hygienic properties and cleanability make it ideal for food, chemical, and pharmaceutical applications. The sheet form is valued for its versatility, smooth finish, and consistency in demanding industrial environments. Applications: • Food processing and dairy equipment • Architectural cladding, elevators, and interior panels • Chemical processing and storage systems • Pharmaceutical and hygienic equipment • Kitchenware, sinks, tables, and appliances • Automotive trim, tanks, and general engineering components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4301 Sheet designed for corrosion resistance, fabrication ease, and long-term durability. Manufactured to international standards, these sheets are ideal for architectural, industrial, and hygienic applications. For custom sheet sizes, technical support, or grade selection assistance, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4311 is a nitrogen-alloyed austenitic stainless steel offering enhanced strength, excellent corrosion resistance, and improved mechanical stability compared to standard chromium-nickel grades. The addition of nitrogen increases yield strength and work-hardening capability, making it suitable for structural, mechanical, and high-strength applications while maintaining good formability and weldability. The grade performs reliably in mildly aggressive chemical environments, atmospheric conditions, and hygienic processing systems. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088 SS 1.4311 in strip, sheet, coil, and plate forms. Our strips are produced through precision slitting, controlled annealing, and high-quality finishing to achieve superior surface consistency, dimensional accuracy, and tight thickness tolerances required for engineering, fabrication, and automated manufacturing applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.020 • Silicon (Si): ≤ 1.00 • Manganese (Mn): 2.00 – 4.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 6.0 – 8.0 • Nitrogen (N): 0.10 – 0.22 Mechanical Properties (Annealed Condition): • Tensile Strength: 600 – 800 MPa • Yield Strength (0.2% Proof): ≥ 260 MPa • Elongation: ≥ 40% • Hardness: typically 160 – 190 HB Key Features: • Higher strength due to nitrogen addition • Excellent corrosion resistance in atmospheric and mildly corrosive environments • Very good weldability without the risk of sensitization • Improved work-hardening rate compared to standard austenitic grades • Good formability suitable for bending, stamping, and deep drawing Material Characteristics: EN 10088 SS 1.4311 Strip exhibits an austenitic microstructure strengthened through nitrogen alloying, offering improved mechanical performance while retaining corrosion resistance and fabrication ease. The grade delivers stable strength, consistent ductility, and reliable resistance to intergranular corrosion. Its balanced properties make it ideal for precision-formed components, structural assemblies, and high-strength industrial applications. Applications: • Structural components and support systems • Food, beverage, and hygienic processing equipment • Pressed, stamped, and deep-drawn components • Chemical processing equipment and piping • Automotive and transportation industry parts • Springs, brackets, fasteners, and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4311 Strip engineered for improved strength, corrosion resistance, and reliable fabrication performance. Manufactured to global standards, these strips are ideal for structural, industrial, and hygienic applications. For customized strip sizes, technical assistance, or support with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4306 is a low-carbon austenitic stainless steel known for its excellent corrosion resistance, superior weldability, and clean surface finish. Its reduced carbon content significantly lowers the risk of carbide precipitation during welding, enhancing resistance to intergranular corrosion. With high ductility, good toughness, and reliable mechanical stability, 1.4306 is widely chosen for applications requiring hygienic surfaces, chemical resistance, and ease of fabrication. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4306 in coil, sheet, plate, and strip forms. Our coils are produced through precision rolling, controlled annealing, and high-quality finishing to ensure exceptional surface quality, tight dimensional tolerances, and consistent mechanical properties suitable for demanding industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 10.0 – 12.0 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 720 MPa • Yield Strength (0.2% Proof): ≥ 200 MPa • Elongation: ≥ 45% • Hardness: typically 150 – 180 HB Key Features: • Excellent resistance to atmospheric and chemically mild corrosive environments • Superior weldability with very low carbon content • High formability suitable for deep drawing, bending, and complex fabrication • Stable mechanical properties and high toughness • Minimized risk of intergranular corrosion during and after welding Material Characteristics: EN 10088 SS 1.4306 Coil provides a stable austenitic structure with enhanced corrosion resistance and excellent cleanliness. Its low carbon composition ensures better weld integrity and reduced sensitization risk, making it a preferred choice for industries requiring hygienic surfaces, consistent strength, and long-term durability. The grade performs well in oxidizing environments and remains easy to fabricate across various manufacturing processes. Applications: • Food, dairy, and beverage processing equipment • Pharmaceutical and hygienic industry components • Chemical processing equipment and piping • Heat exchangers, condensers, and evaporators • Storage tanks, welded structures, and industrial fabrications • Kitchen equipment, catering appliances, and domestic hardware Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4306 Coil engineered for outstanding weldability, corrosion resistance, and high-performance fabrication. Manufactured to international quality standards, these coils are well-suited for hygienic, industrial, and chemical applications. For customized coil dimensions, technical guidance, or assistance in material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4307 is a low-carbon austenitic stainless steel offering excellent corrosion resistance, superior weldability, and good formability. The reduced carbon content provides improved resistance to intergranular corrosion, making it suitable for welded structures and components exposed to mildly aggressive chemical and atmospheric environments. With stable mechanical properties, good toughness, and easy fabrication, 1.4307 is widely used across food processing, architectural, and industrial applications. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4307 in plate, sheet, coil, and strip forms. Our plates are manufactured using precision rolling, controlled annealing, and high-quality finishing to ensure excellent flatness, surface quality, and dimensional accuracy suitable for engineering and fabrication needs. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.5 – 19.5 • Nickel (Ni): 8.0 – 10.5 Mechanical Properties (Annealed Condition): • Tensile Strength: 520 – 700 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 45% • Hardness: typically 150 – 180 HB Key Features: • Excellent corrosion resistance in atmospheric and mildly corrosive environments • Very good weldability due to low carbon content • Good formability suitable for bending, deep drawing, and fabrication • Stable mechanical properties with high toughness • Reduced risk of sensitization and intergranular corrosion Material Characteristics: EN 10088 SS 1.4307 Plate features a stable austenitic microstructure with extra-low carbon content, ensuring improved resistance to carbide precipitation during welding. The grade provides reliable corrosion resistance, good mechanical strength, and excellent formability, making it suitable for a wide range of industrial and hygienic applications. Its consistency and ease of fabrication contribute to long-term performance and durability. Applications: • Food processing and dairy industry equipment • Kitchen, catering, and hygienic applications • Architectural cladding, handrails, and decorative elements • Chemical and pharmaceutical processing equipment • Storage tanks, piping, and welded structures • Automotive and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4307 Plate designed for superior weldability, corrosion resistance, and reliable fabrication performance. Manufactured to international standards, these plates are ideal for food industry, architectural, and general industrial applications. For customized plate dimensions, technical support, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4318 is a nitrogen-alloyed austenitic stainless steel offering enhanced strength, good corrosion resistance, and excellent toughness. With a balanced composition of chromium, nickel, and nitrogen, this grade provides higher mechanical properties than standard 304 while maintaining very good formability and weldability. The addition of nitrogen improves pitting resistance, strengthens the austenitic structure, and ensures stable performance in industrial, architectural, and mildly aggressive environments. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4318 in sheet, coil, plate, and strip forms. Our sheets are produced through precision cold rolling, controlled annealing, and high-quality finishing to ensure accurate thickness, excellent flatness, and consistent mechanical properties suitable for structural, engineering, and fabrication applications. Forms Available: sheet, coil, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 2.5 – 5.5 • Nitrogen (N): 0.110 – 0.160 Mechanical Properties (Annealed Condition): • Tensile Strength: 650 – 800 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 40% • Hardness: typically 160 – 190 HB Key Features: • Higher strength than standard 304 due to nitrogen strengthening • Good corrosion resistance in industrial and atmospheric environments • Excellent formability and weldability for fabrication applications • Very good toughness and mechanical stability across temperatures • Improved pitting resistance compared to basic austenitic grades Material Characteristics: EN 10088 SS 1.4318 Sheet features a strengthened austenitic microstructure with enhanced nitrogen content, providing better yield strength and improved resistance to localized corrosion. This grade maintains excellent ductility, formability, and weldability, making it suitable for applications requiring a combination of higher strength and dependable corrosion performance. Its consistent mechanical behavior ensures reliable performance in structural, architectural, and industrial environments. Applications: • Structural components and fabricated assemblies • Architectural cladding, panels, and building hardware • Food processing and catering equipment • Automotive components and exhaust system parts • Industrial machinery and general engineering applications • Storage tanks, piping, and hygienic equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4318 Sheet designed for high strength, corrosion resistance, and excellent formability. Manufactured to international standards, these sheets are ideal for structural, architectural, and industrial applications. For custom sheet dimensions, technical support, or assistance with material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4310 is a high-strength austenitic stainless steel known for its excellent spring properties, good corrosion resistance, and superior work-hardening capability. With a balanced composition of chromium and nickel, this grade offers outstanding toughness, elasticity, and fatigue strength, making it ideal for applications requiring precise forming, bending, and resilience under repeated stress. 1.4310 can be cold-worked to achieve very high tensile strengths while maintaining stable mechanical performance. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4310 in strip, coil, sheet, and plate forms. Our strips are produced through precision cold rolling, controlled annealing, and high-quality finishing to ensure excellent flatness, tight tolerances, and consistent spring properties for industrial, mechanical, and precision applications. Forms Available: strip, coil, sheet, plate Chemical Composition (%): • Carbon (C): 0.05 – 0.10 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.0 – 19.0 • Nickel (Ni): 6.0 – 9.5 • Nitrogen (N): ≤ 0.11 Mechanical Properties (Cold Worked Condition): • Tensile Strength: 900 – 1200 MPa (varies by temper) • Yield Strength (0.2% Proof): 600 – 1000 MPa • Elongation: typically 10–25% depending on temper • Hardness: typically 300 – 420 HV Key Features: • Excellent spring properties with high elasticity and fatigue strength • Good corrosion resistance in industrial and atmospheric environments • Outstanding work-hardening capacity for achieving high mechanical strength • Good formability suitable for complex bending and precision shapes • Stable performance in cyclic loading and vibration applications Material Characteristics: EN 10088 SS 1.4310 Strip features an austenitic microstructure that offers a combination of ductility, toughness, and the ability to significantly work-harden during fabrication. This makes 1.4310 a preferred choice for precision spring components requiring consistent elastic performance. The grade maintains good corrosion resistance, dimensional stability, and reliable mechanical behavior even after heavy cold working. Applications: • Springs, leaf springs, and flat springs • Clips, clamps, and fastening components • Watch parts, precision instruments, and small mechanical assemblies • Electrical connectors, terminals, and contact parts • Automotive and industrial stamped components • Medical and electronic precision parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4310 Strip engineered for superior spring performance, strength, and corrosion resistance. Manufactured to international standards, these strips are ideal for precision, mechanical, and industrial applications. For custom strip dimensions, temper options, or technical support, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4542 is a high-strength martensitic stainless steel alloyed with chromium, molybdenum, and vanadium to provide exceptional hardness, wear resistance, and corrosion resistance after heat treatment. This grade delivers excellent mechanical performance, high edge retention, and dimensional stability, making it suitable for tools, dies, and components subjected to heavy wear and moderate corrosive environments. 1.4542 responds well to quenching and tempering, achieving a hardened martensitic microstructure with superior toughness. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4542 in plate, sheet, coil, and strip forms. Our plates are processed through controlled hot rolling, precision heat treatment, and high-quality finishing to ensure accurate thickness, uniform hardness, and reliable mechanical properties for industrial and engineering applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): 0.38 – 0.45 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.5 – 14.5 • Molybdenum (Mo): 0.50 – 1.00 • Vanadium (V): 0.10 – 0.25 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 800 – 1050 MPa • Yield Strength (0.2% Proof): ≥ 500 MPa • Elongation: ≥ 8–12% • Hardness: typically 240 – 300 HB (annealed); up to 56 HRC after hardening Key Features: • High hardness and wear resistance after quenching and tempering • Good corrosion resistance in mildly aggressive environments • Excellent edge retention for cutting and precision tools • Good polishability and machinability for high-performance applications • Stable mechanical performance under heavy loads and stress Material Characteristics: EN 10088 SS 1.4542 Plate features a martensitic microstructure that allows high hardness, toughness, and abrasion resistance after heat treatment. The combination of chromium, molybdenum, and vanadium ensures superior wear performance and dimensional stability. With a fine, uniform grain structure and consistent quenching and tempering response, 1.4542 plates are ideal for industrial tooling, dies, and high-strength mechanical components. Applications: • Industrial knives, cutting tools, and blades • Punches, dies, and stamping tools • Mechanical components and shafts subjected to wear • Automotive and engineering high-strength parts • High-wear industrial equipment and machinery • Precision tools requiring high hardness and durability Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4542 Plate engineered for wear resistance, hardness, and corrosion performance. Manufactured to international standards, these plates are suitable for tooling, industrial, and engineering applications. For custom dimensions, technical guidance, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4423 is a nitrogen-alloyed stainless steel offering an excellent combination of high strength, superior corrosion resistance, and enhanced pitting resistance. Developed as an improved alternative to conventional 316L-type austenitic grades, 1.4423 provides higher mechanical properties, improved weldability, and better resistance to localized corrosion due to the presence of nitrogen. This grade performs reliably in aggressive chloride-containing environments and applications requiring strong structural integrity along with superior corrosion performance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4423 in sheet, coil, plate, and strip forms. Our sheets are produced through precision rolling, controlled solution annealing, and premium finishing to ensure excellent surface quality, accurate thickness, and stable corrosion resistance suitable for chemical, marine, and industrial applications. Forms Available: sheet, coil, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 18.5 • Nickel (Ni): 12.0 – 13.0 • Molybdenum (Mo): 2.50 – 3.00 • Nitrogen (N): 0.10 – 0.20 Mechanical Properties (Solution Annealed Condition): • Tensile Strength: 600 – 750 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 35% • Hardness: typically 160 – 190 HB Key Features: • Superior pitting and crevice corrosion resistance due to nitrogen reinforcement • Higher strength compared to conventional 316L-type grades • Excellent resistance to chlorides and aggressive industrial environments • Very good weldability with minimal risk of sensitization • Stable mechanical and corrosion performance across a wide temperature range Material Characteristics: EN 10088 SS 1.4423 Sheet features an optimized austenitic microstructure enriched with nitrogen, which improves both strength and corrosion resistance. The grade offers enhanced resistance to pitting, stress corrosion cracking, and crevice attack in chloride-rich conditions. With stable mechanical properties and excellent formability, 1.4423 sheets provide consistent performance in environments requiring high reliability and superior corrosion protection. Applications: • Chemical processing and petrochemical equipment • Marine components and coastal structural elements • Heat exchangers, condensers, and cooling systems • Food and pharmaceutical processing equipment • Architectural applications exposed to chlorides • High-strength industrial and engineering components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4423 Sheet engineered for exceptional corrosion resistance, strength, and reliability. Manufactured to international standards, these sheets are ideal for chemical, marine, industrial, and structural applications. For customized sheet dimensions, technical assistance, or support with material selection, contact Ladhani Metal Corporation.

EN 10088 SS 1.4422 is a molybdenum-alloyed ferritic stainless steel known for its enhanced resistance to pitting, crevice corrosion, and chloride-induced attack. With a stable low-carbon structure and titanium stabilization, this grade offers excellent weldability, good formability, and consistent corrosion performance in aggressive industrial and mildly marine environments. Its balanced mechanical properties and strong resistance to stress corrosion cracking make it suitable for applications demanding durability, chemical stability, and reliable long-term performance. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4422 in coil, sheet, plate, and strip forms. Our strips are produced using precision cold rolling, controlled annealing, and high-quality surface finishing to ensure tight dimensional accuracy, excellent corrosion resistance, and uniform mechanical properties ideal for industrial, automotive, and engineered applications. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.025 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 21.0 – 23.0 • Molybdenum (Mo): 1.80 – 2.50 • Titanium (Ti): Stabilized • Nitrogen (N): ≤ 0.020 Mechanical Properties (Annealed Condition): • Tensile Strength: 450 – 600 MPa • Yield Strength (0.2% Proof): ≥ 280 MPa • Elongation: ≥ 20% • Hardness: typically 180 – 210 HB Key Features: • Excellent pitting and crevice corrosion resistance due to higher molybdenum content • Strong resistance to chloride-induced corrosion and stress corrosion cracking • Titanium stabilization for improved weldability and structural stability • Good formability suitable for deep drawing, bending, and fabrication • Reliable mechanical performance across temperature variations Material Characteristics: EN 10088 SS 1.4422 Strip features a refined ferritic microstructure designed for enhanced corrosion resistance and mechanical stability. The addition of molybdenum significantly improves pitting resistance, while titanium stabilization ensures clean welds and reduces sensitization. With consistent properties and strong dimensional stability, 1.4422 strips are ideal for chemically aggressive, mildly marine, and industrial environments requiring durability and long service performance. Applications: • Heat exchanger components and industrial cooling systems • Automotive exhaust components and catalytic converter parts • Chemical processing equipment and plant infrastructure • Architectural panels, cladding, and external structural elements • Food processing and hygiene-critical equipment • Components exposed to chlorides or mild marine environments Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4422 Strip engineered for improved corrosion resistance, weldability, and stable performance in demanding applications. Manufactured to international standards, these strips are suitable for automotive, industrial, chemical, and structural use. For customized strip dimensions, technical support, or material selection assistance, contact Ladhani Metal Corporation.

EN 10088 SS 1.4418 is a low-carbon martensitic stainless steel alloyed with chromium, nickel, and molybdenum, offering an excellent balance of high strength, toughness, and improved corrosion resistance. This grade provides reliable performance in moderately aggressive environments, especially where a combination of mechanical strength and corrosion protection is essential. With good weldability, stable microstructure, and strong resistance to pitting and stress corrosion cracking, 1.4418 is widely used in load-bearing and marine engineering applications. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4418 in coil, sheet, plate, and strip forms. Our coils are produced through precision hot rolling, controlled heat treatment, and high-quality finishing to ensure accurate thickness, excellent toughness, and consistent mechanical properties suitable for industrial, marine, and engineering applications. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.050 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 15.0 – 17.0 • Nickel (Ni): 3.5 – 5.5 • Molybdenum (Mo): 0.50 – 1.50 • Nitrogen (N): ≤ 0.070 Mechanical Properties (Quenched and Tempered Condition): • Tensile Strength: 700 – 900 MPa • Yield Strength (0.2% Proof): ≥ 450 MPa • Elongation: ≥ 18% • Hardness: typically 220 – 270 HB Key Features: • High strength with excellent toughness and impact resistance • Good corrosion resistance in mildly to moderately aggressive environments • Improved pitting and crevice corrosion resistance due to molybdenum content • Good weldability and machinability for a martensitic grade • Stable performance under mechanical stress and variable temperatures Material Characteristics: EN 10088 SS 1.4418 Coil features a refined martensitic microstructure enhanced by nickel and molybdenum, which improves its toughness and corrosion resistance. The grade maintains excellent mechanical stability, providing reliable strength and resilience in demanding service environments. With predictable quenching and tempering response, 1.4418 coils are suitable for structural, mechanical, and marine applications requiring both strength and corrosion resistance. Applications: • Marine components, offshore structures, and shipbuilding hardware • Pump shafts, propeller shafts, and mechanical components • High-strength engineering and industrial parts • Hydraulic equipment and pressure-bearing components • Automotive and heavy machinery parts • Structural elements in corrosive or load-bearing environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4418 Coil designed for strength, corrosion resistance, and stable performance in demanding applications. Manufactured to international standards, these coils are ideal for marine, engineering, and industrial use. For custom coil dimensions, technical guidance, or support with material selection, contact Ladhani Metal Corporation.

EN 10088 SS 1.4313 is a low-carbon martensitic stainless steel containing chromium and nickel, offering an excellent combination of high strength, good toughness, and improved weldability. This grade provides moderate corrosion resistance and maintains stable mechanical properties, even at low temperatures. With its balanced composition and refined microstructure, 1.4313 is widely used in applications that require strength, impact resistance, and reliability under demanding operating conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4313 in plate, sheet, coil, and strip forms. Our plates are produced through controlled hot rolling, precision heat treatment, and consistent finishing to ensure accurate thickness, uniform strength, and optimal performance for industrial, engineering, and structural applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.050 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.0 – 14.0 • Nickel (Ni): 3.5 – 4.5 • Molybdenum (Mo): ≤ 0.50 Mechanical Properties (Quenched and Tempered Condition): • Tensile Strength: 650 – 850 MPa • Yield Strength (0.2% Proof): ≥ 450 MPa • Elongation: ≥ 18% • Hardness: typically 220 – 260 HB Key Features: • High mechanical strength and excellent toughness • Improved weldability compared to standard martensitic grades • Good corrosion resistance in mildly corrosive environments • Stable performance at low temperatures • Good machinability and structural reliability Material Characteristics: EN 10088 SS 1.4313 Plate features a tempered martensitic microstructure that provides a strong balance of strength, ductility, and toughness. The nickel addition enhances impact resistance and weldability, making it suitable for critical load-bearing and structural applications. With predictable heat-treatment behavior and good dimensional stability, this grade is ideal for mechanical components exposed to stress, vibration, and variable temperatures. Applications: • Turbine components and hydroelectric power equipment • Pump parts, shafts, and mechanical components • Offshore and marine engineering structures • Pressure vessels and industrial machinery • Automotive and heavy engineering applications • Structural components requiring toughness and strength Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4313 Plate manufactured for strength, toughness, and reliable performance in demanding environments. Produced to international standards, these plates are suitable for structural, mechanical, and engineering applications. For custom dimensions, technical guidance, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4122 is a martensitic stainless steel containing chromium, molybdenum, and a moderate carbon content that allows it to achieve high hardness and excellent wear resistance after heat treatment. This grade offers improved corrosion resistance compared to standard martensitic steels due to its molybdenum addition, making it suitable for applications exposed to mildly aggressive environments. With stable mechanical strength, good edge retention, and strong resistance to abrasion, 1.4122 is widely used for precision components and cutting tools. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4122 in sheet, plate, coil, and strip forms. Our sheets are produced using controlled rolling, precision annealing or quenching and tempering, and high-quality finishing processes to ensure dimensional accuracy, consistent hardness, and reliable mechanical performance for industrial and engineering applications. Forms Available: sheet, coil, plate, strip Chemical Composition (%): • Carbon (C): 0.25 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.030 • Chromium (Cr): 12.0 – 14.0 • Molybdenum (Mo): 0.80 – 1.30 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 750 – 1050 MPa • Yield Strength (0.2% Proof): ≥ 450 MPa • Elongation: ≥ 10% • Hardness: typically 220 – 280 HB (annealed); up to 52–54 HRC after hardening Key Features: • High hardness and mechanical strength after heat treatment • Enhanced corrosion resistance due to molybdenum content • Excellent wear resistance and edge retention • Good response to quenching and tempering • Suitable for fine machining, stamping, and precision forming Material Characteristics: EN 10088 SS 1.4122 Sheet features a durable martensitic microstructure that provides excellent wear resistance and stable mechanical properties. The molybdenum addition enhances corrosion performance, especially against pitting and localized attack. With a uniform grain structure and predictable heat-treatment response, 1.4122 sheets deliver reliable performance for demanding engineering and industrial applications requiring hardness, toughness, and dimensional stability. Applications: • Industrial blades, knives, and cutting tools • Mechanical components and wear parts • Pump shafts and precision-engineered parts • Surgical and technical instruments • Automotive and machine components • Hardware and tools requiring high hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4122 Sheet designed for strength, hardness, and improved corrosion resistance. Produced to international standards, these sheets are ideal for precision engineering, cutting tools, and industrial applications. For custom dimensions, technical assistance, or support with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4116 is a high-carbon martensitic stainless steel alloyed with chromium, molybdenum, and vanadium to provide a balanced combination of hardness, corrosion resistance, and wear performance. Known for its ability to achieve high hardness after heat treatment, this grade offers excellent edge retention, fine polishability, and good corrosion resistance in mildly aggressive environments. Its refined microstructure makes 1.4116 suitable for precision cutting applications and engineered components that require consistent strength and durability. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4116 in strip, sheet, coil, and plate forms. Our 1.4116 strips are produced through controlled rolling, heat treatment, and surface finishing processes to ensure consistent hardness, accurate thickness, and stable mechanical properties suitable for industrial, medical, and engineering applications. Forms Available: strip, sheet, coil, plate Chemical Composition (%): • Carbon (C): 0.45 – 0.55 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.030 • Chromium (Cr): 14.0 – 15.0 • Molybdenum (Mo): 0.50 – 0.80 • Vanadium (V): 0.10 – 0.20 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 800 – 1050 MPa • Yield Strength (0.2% Proof): ≥ 500 MPa • Elongation: ≥ 8–10% • Hardness: typically 250 – 300 HB (annealed); up to 56 HRC after hardening Key Features: • High hardness and wear resistance after heat treatment • Good corrosion resistance in mildly corrosive atmospheres • Excellent edge retention and sharpness capability • Good polishability and surface finish quality • Suitable for precision forming, stamping, and machining Material Characteristics: EN 10088 SS 1.4116 Strip features a martensitic microstructure that enables high hardness, strong wear resistance, and reliable corrosion performance. The addition of molybdenum enhances pitting and corrosion resistance, while vanadium improves hardness, toughness, and grain refinement. This combination makes 1.4116 suitable for precision tools, medical instruments, and components requiring fine cutting performance and long service life. Applications: • Kitchen knives, industrial blades, and cutting tools • Surgical instruments and precision tools • Mechanical components and pump parts • High-wear engineering and automotive components • Stamped and formed precision parts • Hardware and machine elements requiring high hardness Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4116 Strip engineered for high hardness, wear resistance, and dependable corrosion performance. Manufactured according to international standards, these strips are ideal for precision cutting, engineering, and industrial applications. For custom strip sizes, technical guidance, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4110 is a high-carbon martensitic stainless steel containing chromium and micro-alloying elements designed to achieve high hardness, excellent wear resistance, and good corrosion resistance after heat treatment. This grade offers a strong combination of edge retention, mechanical strength, and dimensional stability, making it suitable for demanding industrial and precision-cutting applications. Its ability to achieve high hardness through quenching and tempering makes 1.4110 a preferred choice for cutting tools and engineering components. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4110 in coil, sheet, strip, and plate forms. Our coils are processed through controlled rolling, heat treatment, and surface finishing to achieve uniform hardness, accurate thickness, and stable mechanical properties suitable for industrial use. Forms Available: coil, sheet, strip, plate Chemical Composition (%): • Carbon (C): 0.45 – 0.55 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.030 • Chromium (Cr): 14.0 – 15.0 • Molybdenum (Mo): 0.50 – 1.00 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 800 – 1050 MPa • Yield Strength (0.2% Proof): ≥ 500 MPa • Elongation: ≥ 8–10% • Hardness: typically 240 – 300 HB (annealed); up to 56 HRC when hardened Key Features: • High hardness and wear resistance after heat treatment • Good corrosion resistance in mildly aggressive environments • Excellent edge retention for cutting and precision applications • Good polishability for functional and decorative finishes • Suitable for precision machining, forming, and stamping Material Characteristics: EN 10088 SS 1.4110 Coil features a martensitic microstructure that enables high hardness and mechanical strength after quenching and tempering. Its balanced chromium and molybdenum content ensures good corrosion resistance and stability in service environments. With consistent surface quality and uniform grain structure, 1.4110 coils provide dependable performance for precision parts, blades, engineering tools, and high-wear components. Applications: • Industrial knives, blades, and cutting tools • Surgical and precision instruments • Mechanical components and pump parts • Automotive and engineering hardware • Wear-resistant machine elements • Stamped and formed components requiring high hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4110 Coil manufactured for hardness, durability, and corrosion resistance. Produced to international standards, these coils are ideal for precision cutting, engineering, and industrial applications. For custom coil widths, technical assistance, or grade selection guidance, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4419 is a high-strength austenitic stainless steel alloyed with chromium, nickel, and molybdenum, offering excellent corrosion resistance, superior toughness, and reliable performance in demanding environments. Its balanced chemical composition provides outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking, particularly in chloride-rich and marine atmospheres. With high mechanical strength, good weldability, and exceptional stability across a wide temperature range, 1.4419 is widely used for pressure equipment and critical industrial components. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4419 in plate, sheet, coil, and strip forms. Our plates are produced with precision hot rolling, controlled heat treatment, and consistent finishing to deliver accurate thickness, superior flatness, and stable mechanical properties for engineering and industrial applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.030 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 15.0 – 17.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Nitrogen (N): 0.10 – 0.20 Mechanical Properties (Solution Annealed Condition): • Tensile Strength: 650 – 850 MPa • Yield Strength (0.2% Proof): ≥ 320 MPa • Elongation: ≥ 30% • Hardness (HB): typically ≤ 230 Key Features: • Excellent corrosion resistance in chloride and acidic environments • High strength and toughness, even at low temperatures • Good resistance to pitting and crevice corrosion due to molybdenum content • Superior weldability and formability • Stable mechanical performance under high stress and pressure • Suitable for temperature-critical and corrosion-intensive applications Material Characteristics: EN 10088 SS 1.4419 Plate is an austenitic alloy known for its excellent corrosion resistance and mechanical strength. The high nickel and molybdenum content ensures enhanced resistance to chlorides, while nitrogen increases strength without compromising ductility. The material maintains dimensional stability, uniform microstructure, and dependable performance across a wide operating range, making it ideal for pressure vessels, chemical processing equipment, and structural components. Applications: • Pressure vessels, heat exchangers, and boilers • Chemical and petrochemical processing equipment • Marine and offshore structures • Pump housings, shafts, and industrial components • Paper and pulp industry equipment • Food processing and pharmaceutical machinery • Cryogenic applications requiring toughness and strength Conclusion: Ladhani Metal Corporation supplies premium-grade EN 10088 SS 1.4419 Plate designed for strength, corrosion resistance, and long-term durability. Manufactured to international quality standards, these plates are ideal for pressure, chemical, and engineering applications. For custom dimensions, technical guidance, or grade selection support, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4034 is a high-carbon martensitic stainless steel containing approximately 12.5–14.5% chromium and an elevated carbon content that allows it to achieve very high hardness and strength after heat treatment. Known for its excellent wear resistance, good corrosion resistance in mildly aggressive environments, and sharp edge retention, 1.4034 is widely used in applications requiring durability, precision cutting, and reliable mechanical performance. The grade responds well to quenching and tempering, giving it a fine martensitic structure with superior hardness levels. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4034 in sheet, coil, plate, and strip forms. Our sheets are produced through controlled rolling, precise heat treatment, and high-quality surface finishing to ensure dimensional accuracy, consistent hardness, and stable mechanical properties for industrial and engineering applications. Forms Available: sheet, coil, plate, strip Chemical Composition (%): • Carbon (C): 0.43 – 0.50 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.030 • Chromium (Cr): 12.5 – 14.5 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 800 – 1100 MPa • Yield Strength (0.2% Proof): ≥ 500 MPa • Elongation: ≥ 6–10% • Hardness (HB): typically 240 – 295 in annealed condition; up to 52 HRC after hardening Key Features: • High hardness and strength after quenching and tempering • Good corrosion resistance in mildly corrosive environments • Excellent wear resistance and edge-holding capability • Good polishability for decorative or precision applications • Suitable for fine forming, machining, and precision cutting Material Characteristics: EN 10088 SS 1.4034 Sheet features a martensitic microstructure that achieves high hardness and mechanical strength after heat treatment. Its chromium content provides moderate corrosion resistance, making it suitable for environments that require a balance of durability and corrosion protection. The material maintains uniform mechanical behavior, dependable wear resistance, and excellent dimensional stability, making it suitable for precision-engineered and high-performance components. Applications: • Cutlery, knives, and high-performance blades • Surgical and dental instruments • Pump shafts, mechanical parts, and wear components • Automotive and engineering parts • Precision tools and industrial cutting instruments • Hardware and machine elements requiring high hardness Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4034 Sheet produced for superior hardness, strength, and reliable corrosion performance. Manufactured to international standards, these sheets are ideal for precision, engineering, and industrial applications. For custom sizes, technical guidance, or assistance with grade selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4031 is a high-carbon martensitic stainless steel containing approximately 12.5–14.5% chromium and a relatively higher carbon content to achieve superior hardness after heat treatment. This grade offers good corrosion resistance in mildly aggressive environments, combined with excellent wear resistance, high strength, and the ability to attain a sharp, durable edge. Due to its favorable response to quenching and tempering, 1.4031 is widely used in applications requiring strong mechanical performance and precision cutting capability. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4031 in strip, sheet, coil, and plate forms. Our 1.4031 strips are produced with controlled rolling, heat treatment, and finishing processes to ensure tight dimensional tolerances, uniform hardness, and consistent mechanical characteristics suited for industrial and engineering applications. Forms Available: strip, sheet, coil, plate Chemical Composition (%): • Carbon (C): 0.36 – 0.45 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.5 – 14.5 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 750 – 1050 MPa • Yield Strength (0.2% Proof): ≥ 450 MPa • Elongation: ≥ 8–10% • Hardness (HB): typically 230 – 300 depending on heat treatment Key Features: • High hardness and strength after quenching and tempering • Good corrosion resistance in mildly corrosive conditions • Superior wear resistance and cutting-edge retention • Good polishability for aesthetic and functional finishing • Suitable for fine stamping, forming, and precision machining Material Characteristics: EN 10088 SS 1.4031 Strip exhibits a hardened martensitic microstructure that provides excellent mechanical strength, edge durability, and stable wear performance. Its chromium content ensures moderate corrosion resistance, making it ideal for applications where hardness and abrasion resistance are prioritized. With a fine grain structure and consistent heat-treatment response, the material ensures dependable performance in precision-engineered components. Applications: • Cutting tools, blades, and industrial knives • Surgical instruments and fine-edged tools • Springs, clips, and precision stamped parts • Pump components, mechanical parts, and shafts • Automotive and engineering applications • Wear-resistant machine elements and hardware Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4031 Strip engineered for superior hardness, wear resistance, and dependable corrosion performance. Manufactured to international quality standards, these strips are ideal for precision components and high-strength applications. For custom sizes, technical assistance, or material selection support, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4028, also known as X30Cr13, is a high-carbon martensitic stainless steel with a chromium content of 12–14% and higher carbon levels for superior hardenability. This grade offers excellent hardness, strength, and abrasion resistance after heat treatment, along with moderate corrosion resistance. It is widely used for cutting tools, precision mechanical parts, and components requiring strong edge retention. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4028 in coil, sheet, plate, and strip forms. Our coils are produced using controlled heat treatment, precision rolling, and advanced finishing to achieve uniform hardness, accurate thickness, and high surface quality required for machining and industrial fabrication. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): 0.26 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.0 – 14.0 Mechanical Properties: • Tensile Strength: 750 – 1000 MPa • Yield Strength (0.2% Proof): ≥ 350 MPa • Elongation: ≥ 10% • Hardness (HB): 240 – 290 (annealed), significantly higher when hardened Key Features: • Very high hardness and wear resistance • Strong edge retention and cutting performance • Good corrosion resistance in clean or mildly corrosive conditions • Excellent durability after heat treatment • Suitable for precision-machined and sharp-edged components Material Characteristics: EN 10088 SS 1.4028 Coil features a hardenable martensitic structure with elevated carbon content, enabling high surface hardness, wear resistance, and mechanical strength. The alloy maintains dimensional stability and strong performance in components requiring long-term durability under mechanical stress. Applications: • Cutlery, knives, and cutting tools • Valve components and precision instruments • Pump shafts and mechanical spindles • Wear-resistant machine parts • Industrial blades and tools Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4028 Coil designed for applications requiring high hardness, strength, and dependable wear resistance. Manufactured to international standards, our coils deliver consistent results across industrial, mechanical, and tooling sectors. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4021 is a medium-carbon martensitic stainless steel containing approximately 12–14% chromium. This grade provides a good balance of strength, hardness, and corrosion resistance, especially after quenching and tempering. It is widely used for parts requiring high mechanical strength, moderate corrosion resistance, and excellent surface finish. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088 SS 1.4021 in plate, sheet, coil, and strip forms. Our plates are heat-treated, precisely rolled, and finished to maintain consistent hardness, accurate thickness, and dimensional stability suited for mechanical, industrial, and engineering applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): 0.16 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.0 – 14.0 Mechanical Properties: • Tensile Strength: 650 – 900 MPa (after heat treatment) • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 12% • Hardness: 200 – 260 HB, depending on heat treatment Key Features: • Good hardness and strength after quenching and tempering • Moderate corrosion resistance in mildly corrosive environments • Suitable for precision machining and polishing • Improved wear resistance compared to lower-carbon martensitic grades • Reliable mechanical performance for industrial applications Material Characteristics: EN 10088 SS 1.4021 Plate offers a martensitic microstructure that delivers high strength and hardness while maintaining adequate toughness. Its chromium content ensures moderate corrosion resistance, making it suitable for environments where wear and mechanical loading are primary concerns. The material provides excellent response to heat treatment and maintains dimensional stability during machining and fabrication. Applications: • Pump and valve components • Shafts, spindles, and mechanical assemblies • Blades, knives, and cutting tools • Automotive and engineering parts • Industrial machine components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4021 Plate manufactured for high strength, wear resistance, and dependable corrosion performance. Our plates are produced to meet industrial and engineering demands with precision and durability. For technical support, customized sizes, or assistance in material selection, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4006, also known as X12Cr13, is a martensitic stainless steel containing approximately 12–14% chromium. This grade offers good corrosion resistance in mildly corrosive environments along with high hardness and strength after heat treatment. With strong mechanical performance, moderate wear resistance, and good machinability, 1.4006 is widely used for components requiring strength, durability, and moderate corrosion resistance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4006 in strip, coil, sheet, and plate forms. Our precision-processed strips are produced through controlled rolling, heat treatment, and finishing to ensure accurate thickness, consistent hardness, and a smooth surface suitable for machining, cutting, and fabrication applications. Forms Available: strip, coil, sheet, plate Chemical Composition (%): • Carbon (C): 0.08 – 0.15 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 12.0 – 14.0 Mechanical Properties (Annealed or QT Condition): • Tensile Strength: 550 – 800 MPa • Yield Strength (0.2% Proof): ≥ 300 MPa • Elongation: ≥ 15% • Hardness (HB): typically 170 – 240 depending on heat treatment Key Features: • Good corrosion resistance in mildly aggressive environments • High strength and hardness after quenching and tempering • Good machinability compared to other stainless grades • Suitable for polishing and precision finishing • Reliable wear resistance for mechanical applications Material Characteristics: EN 10088 SS 1.4006 Strip features a martensitic microstructure that provides enhanced strength and hardness when heat treated. The chromium content ensures moderate corrosion resistance, while the controlled carbon level allows for good hardenability. The material offers dimensional stability, consistent mechanical behavior, and reliable performance in applications requiring strength and moderate corrosion resistance. Applications: • Turbine blades and compressor parts • Pump shafts, valve components, and spindles • Cutlery and kitchen tools • Mechanical and structural components • Wear-resistant machine parts • Automotive and engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4006 Strip engineered for strength, durability, and dependable corrosion resistance. Manufactured to international standards, our strips deliver reliable performance across mechanical, industrial, and engineering applications. For customized sizes, technical support, or material selection assistance, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4592, also known as X2CrTiCuNb18, is a stabilized ferritic stainless steel alloyed with titanium, niobium, and copper. The chromium content of 17.0–19.0% provides strong corrosion resistance, while copper enhances resistance to atmospheric and mildly acidic environments. Titanium and niobium work together to prevent sensitization, improve weldability, and stabilize the microstructure during thermal cycling. This grade offers good formability, reliable corrosion performance, and stable mechanical properties, making it suitable for industrial, architectural, and automotive applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4592 in coil, sheet, plate, and strip forms. Our coils are produced through precise rolling and controlled annealing to achieve excellent flatness, smooth surface finish, and consistent mechanical behavior ideal for fabrication and processing industries. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.03 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Titanium (Ti): ≥ 5 × C • Niobium (Nb): 0.15 – 0.60 • Copper (Cu): 0.30 – 1.00 Mechanical Properties: • Tensile Strength: 430 – 600 MPa • Yield Strength (0.2% Proof): ≥ 260 MPa • Elongation: ≥ 20% • Hardness (HB): ≤ 200 Key Features: • Enhanced corrosion resistance due to copper addition • Titanium and niobium stabilization prevents carbide precipitation • Good weldability and reduced risk of sensitization • Strong oxidation resistance and thermal stability • Reliable formability for bending, shaping, and fabrication Material Characteristics: EN 10088 SS 1.4592 Coil offers a ferritic microstructure strengthened and stabilized by Ti and Nb, providing durable grain control and resistance to thermal degradation. Copper improves resistance to atmospheric corrosion and mildly acidic environments. The material exhibits uniform thickness, smooth surface quality, and dependable mechanical behavior, making it suitable for components requiring long-term performance in corrosive or heated conditions. Applications: • Automotive exhaust and heat protection components • Architectural cladding, panels, and decorative elements • Heat exchangers, ventilation systems, and industrial housings • Household appliances and kitchen equipment • Fabricated parts for industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4592 Coil designed for corrosion resistance, stability, and long-term durability. Manufactured to international standards, our coils provide excellent performance across automotive, industrial, and architectural applications. For custom sizes, technical guidance, or specialized material support, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4509, also known as X2CrTiNb18, is a titanium- and niobium-stabilized ferritic stainless steel containing approximately 17.0–19.0% chromium. The combination of Ti and Nb enhances weldability, prevents intergranular corrosion, and improves stability during thermal exposure. This grade offers good corrosion resistance, excellent oxidation resistance, and reliable mechanical properties, making it suitable for automotive, industrial, and architectural applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4509 in plate, sheet, coil, and strip forms. Our plates are produced through controlled rolling and annealing processes to ensure uniform surface finish, accurate thickness, and stable mechanical performance, meeting the requirements of fabrication and industrial processing industries. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.03 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Titanium (Ti): ≥ 4 × C • Niobium (Nb): 0.10 – 0.60 Mechanical Properties: • Tensile Strength: 430 – 600 MPa • Yield Strength (0.2% Proof): ≥ 260 MPa • Elongation: ≥ 20% • Hardness (HB): ≤ 200 Key Features: • Strong corrosion resistance in mildly aggressive environments • Titanium and niobium stabilization prevents sensitization during welding • Excellent oxidation and scaling resistance • Good formability and fabrication characteristics • Stable performance at elevated temperatures Material Characteristics: EN 10088 SS 1.4509 Plate features a ferritic microstructure with a high chromium content that provides excellent corrosion and heat resistance. The presence of Ti and Nb binds carbon and nitrogen, preventing carbide formation and ensuring structural stability during welding and thermal cycling. The alloy maintains a uniform grain structure, smooth surface finish, and dependable mechanical performance suitable for long-term industrial applications. Applications: • Automotive exhaust systems and heat shields • Kitchen equipment and household appliances • Architectural cladding and structural panels • Heat exchangers and ventilation systems • Industrial fabrication and processing equipment Conclusion: Ladhani Metal Corporation offers high-quality EN 10088 SS 1.4509 Plate designed for durability, corrosion resistance, and stable performance in thermal environments. Manufactured according to international standards, our plates deliver consistent and reliable results across automotive, architectural, and industrial applications. For custom dimensions, technical support, or material selection guidance, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4526, also known as X2CrMoTi18-2-Cu, is a copper- and titanium-stabilized ferritic stainless steel containing approximately 17.0–18.0% chromium, 1.8–2.5% molybdenum, and a small copper addition. The combination of molybdenum and copper significantly enhances resistance to pitting, crevice corrosion, and stress corrosion cracking, especially in chloride-containing environments. Titanium stabilization improves weldability, prevents carbide precipitation, and ensures structural stability under thermal exposure. EN 10088 1.4526 offers excellent corrosion resistance, good mechanical performance, and reliable fabrication characteristics. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4526 in strip, coil, sheet, and plate forms. Our precision-rolled strips undergo controlled annealing and advanced finishing processes to deliver uniform thickness, excellent flatness, and consistent mechanical properties suitable for industrial, architectural, and chemical processing applications. Forms Available: strip, coil, sheet, plate Chemical Composition (%): • Carbon (C): ≤ 0.03 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 18.0 • Molybdenum (Mo): 1.80 – 2.50 • Titanium (Ti): ≥ 5 × C • Copper (Cu): 0.30 – 1.00 Mechanical Properties: • Tensile Strength: 450 – 600 MPa • Yield Strength (0.2% Proof): ≥ 260 MPa • Elongation: ≥ 20% • Hardness (HB): ≤ 200 Key Features: • Excellent pitting and crevice corrosion resistance due to molybdenum and copper • Titanium stabilization enhances weldability and prevents sensitization • High resistance to chloride-induced corrosion • Good formability and reliable behavior during bending and shaping • Strong thermal stability and oxidation resistance Material Characteristics: EN 10088 SS 1.4526 Strip features a robust ferritic microstructure enriched with molybdenum and copper for enhanced corrosion performance. Copper improves resistance in reducing and acidic environments, while titanium prevents the formation of chromium carbides during welding. The material maintains a smooth surface, uniform grain structure, and excellent dimensional stability, making it suitable for forming, welding, and long-term service in demanding conditions. Applications: • Heat exchangers and condenser components • Chemical processing and industrial equipment • Architectural cladding and decorative structures • Automotive exhaust components • Kitchen equipment and household appliances • Marine and coastal environment applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4526 Strip engineered for superior corrosion resistance, weldability, and long-term stability. Manufactured to international standards, our strips are ideal for chemical, architectural, industrial, and marine applications. For custom sizes, detailed technical assistance, or material selection support, contact Ladhani Metal Corporation #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4589, also known as X8CrNiTi18-10, is a titanium-stabilized austenitic stainless steel containing approximately 17.0–19.0% chromium and 9.0–12.0% nickel. Titanium stabilization provides excellent resistance to intergranular corrosion, especially after welding or prolonged exposure to elevated temperatures. This grade offers good corrosion resistance in a wide range of environments, combined with high toughness, good formability, and excellent weldability. EN 10088 1.4589 performs reliably in heat-exposed and corrosive industrial applications. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4589 in coil, sheet, plate, and strip forms. Our coils are produced using advanced rolling, solution annealing, and finishing techniques to ensure precise thickness control, smooth surface quality, and consistent mechanical properties suitable for industrial processing, forming, and fabrication. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.08 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 12.0 • Titanium (Ti): ≥ 5 × C Mechanical Properties: • Tensile Strength: 500 – 750 MPa • Yield Strength (0.2% Proof): ≥ 190 MPa • Elongation: ≥ 40% • Hardness (HB): ≤ 215 Key Features: • Excellent corrosion resistance in atmospheric, chemical, and mildly aggressive environments • Titanium stabilization prevents carbide precipitation and improves weldability • High toughness and ductility across a wide temperature range • Good formability for deep drawing, bending, and fabrication • Reliable performance during heat cycling and continuous thermal exposure Material Characteristics: EN 10088 SS 1.4589 Coil features a stable austenitic microstructure with titanium stabilization, providing exceptional resistance to intergranular corrosion even after welding. The balanced chromium and nickel content ensures strong corrosion resistance, while titanium binds carbon to prevent sensitization. The grade maintains excellent toughness, thermal stability, and surface quality, making it suitable for demanding industrial and structural applications. Applications: • Heat exchangers and boiler components • Food processing and pharmaceutical equipment • Chemical and petrochemical plant installations • Architectural cladding and structural elements • Automotive exhaust and heat-resistant parts • Industrial fabrication exposed to heat and moisture Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088 SS 1.4589 Coil manufactured to international specifications, ensuring durability, corrosion resistance, and reliable mechanical performance. Our coils are ideal for industrial, structural, and high-temperature applications. For custom dimensions, technical support, or material selection guidance, contact Ladhani Metal Corporation — your trusted stainless steel manufacturing and export partner. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4017, also known as X6Cr17, is a ferritic stainless steel containing approximately 16.0–18.0% chromium. This grade offers good corrosion resistance, especially in mildly aggressive environments, along with excellent resistance to oxidation and scaling at elevated temperatures. With stable mechanical properties, good formability, and improved resistance to stress corrosion cracking compared to austenitic grades, EN 10088 1.4017 is widely used in industrial, structural, and decorative applications. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4017 in plate, sheet, coil, and strip forms. Our plates are produced using controlled rolling, precision annealing, and high-quality surface finishing to ensure uniform thickness, dimensional accuracy, and reliable mechanical performance suitable for fabrication and engineering applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.08 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.0 – 18.0 Mechanical Properties: • Tensile Strength: 450 – 650 MPa • Yield Strength (0.2% Proof): ≥ 280 MPa • Elongation: ≥ 18% • Hardness (HB): ≤ 200 Key Features: • Good corrosion resistance in mildly corrosive and atmospheric environments • Excellent resistance to oxidation and scaling at high temperatures • Good formability and ease of fabrication • Lower susceptibility to stress corrosion cracking compared to austenitic grades • Stable mechanical performance and dimensional reliability Material Characteristics: EN 10088 SS 1.4017 Plate has a ferritic microstructure that provides stable mechanical behavior, good thermal conductivity, and moderate corrosion resistance. Its high chromium content enhances resistance to oxidation and provides a protective surface layer that improves durability. The grade offers predictable forming characteristics and maintains stability during fabrication, making it suitable for structural and decorative uses. Applications: • Kitchen and household equipment • Automotive trim and exhaust components • Industrial equipment and fabricated assemblies • Architectural panels and interior design elements • Heat-resistant components and general engineering applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4017 Plate manufactured to international standards, ensuring durability, corrosion resistance, and reliable mechanical performance. Our plates are suitable for industrial, architectural, and automotive applications requiring stability and moderate corrosion resistance. For customized sizes, technical information, or assistance in material selection, contact Ladhani Metal Corporation — your trusted stainless steel manufacturing and export partner. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4595, also known as X6CrNiMoTi17-12-2, is a titanium-stabilized austenitic stainless steel containing approximately 16.5–18.5% chromium, 11.0–13.0% nickel, and 2.0–2.5% molybdenum. The addition of molybdenum significantly improves resistance to pitting and crevice corrosion, especially in chloride-rich environments. Titanium stabilization enhances weldability, prevents carbide precipitation, and ensures long-term structural stability under thermal exposure. EN 10088 1.4595 offers an excellent combination of corrosion resistance, toughness, and formability. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4595 in strip, coil, sheet, and plate forms. Our precision-engineered strips are produced through controlled rolling, solution annealing, and advanced finishing processes to ensure excellent surface quality, dimensional accuracy, and consistent mechanical properties ideal for high-performance industrial applications. Forms Available: strip, coil, sheet, plate Chemical Composition (%): • Carbon (C): ≤ 0.08 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 11.0 – 13.0 • Molybdenum (Mo): 2.00 – 2.50 • Titanium (Ti): ≥ 5 × C Mechanical Properties: • Tensile Strength: 520 – 720 MPa • Yield Strength (0.2% Proof): ≥ 210 MPa • Elongation: ≥ 40% • Hardness (HB): ≤ 215 Key Features: • Excellent corrosion resistance, especially in chloride-containing environments • Superior pitting and crevice corrosion resistance due to molybdenum • Titanium stabilization improves weldability and prevents sensitization • Exceptional toughness and ductility • Good formability and suitability for deep drawing and bending • Stable performance at both low and elevated temperatures Material Characteristics: EN 10088 SS 1.4595 Strip features a stable austenitic microstructure with titanium stabilization, providing excellent resistance to intergranular corrosion and thermal degradation. The combination of chromium, nickel, and molybdenum ensures high resistance to chemical attack, making the material ideal for harsh operating conditions. Its high toughness and formability allow efficient processing in demanding industrial and architectural applications. Applications: • Chemical processing equipment • Heat exchangers and condenser components • Food and pharmaceutical processing machinery • Marine environments and saltwater applications • Architectural and structural fabrication • Industrial components requiring high corrosion resistance Conclusion: Ladhani Metal Corporation supplies top-quality EN 10088 SS 1.4595 Strip designed for superior corrosion resistance, excellent weldability, and long-term mechanical performance. Manufactured to international quality standards, our strips are ideal for chemical, marine, architectural, and industrial applications. For custom sizes, detailed technical support, or material selection guidance, contact Ladhani Metal Corporation — your reliable stainless steel manufacturing and export partner. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4520, also known as X2CrTi18, is a titanium-stabilized ferritic stainless steel containing approximately 17.0–18.0% chromium. The titanium addition enhances stabilization, prevents carbide precipitation during welding, and significantly improves resistance to intergranular corrosion. With reliable corrosion resistance, good formability, and excellent scaling resistance at elevated temperatures, EN 10088 1.4520 is suitable for industrial, structural, and decorative applications exposed to moisture and mild corrosive conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088 SS 1.4520 in coil, sheet, plate, and strip forms. Our coils are produced through controlled rolling, precision annealing, and high-quality finishing processes to deliver uniform thickness, excellent surface finish, and stable mechanical properties ideal for fabrication and automated processing. Forms Available: coil, sheet, plate, strip Chemical Composition (%): • Carbon (C): ≤ 0.03 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 18.0 • Titanium (Ti): ≥ 5 × C, ≤ 0.80 Mechanical Properties: • Tensile Strength: 430 – 630 MPa • Yield Strength (0.2% Proof): ≥ 260 MPa • Elongation: ≥ 20% • Hardness (HB): ≤ 200 Key Features: • Good corrosion resistance in mild atmospheric and industrial environments • Titanium stabilization ensures improved weldability and prevents sensitization • Excellent resistance to oxidation and scaling at elevated temperatures • Good formability and ease of fabrication • Stable mechanical performance under heat cycling Material Characteristics: EN 10088 SS 1.4520 Coil features a ferritic microstructure supported by titanium stabilization, ensuring superior resistance to intergranular corrosion and thermal degradation. The high chromium content provides enhanced oxidation and corrosion resistance, while the low carbon content ensures stable grain structure during welding and heat exposure. These attributes make 1.4520 ideal for applications requiring durability, dimensional stability, and clean surface finish. Applications: • Automotive components and exhaust systems • Kitchen equipment and household appliances • Heat exchangers and HVAC systems • Architectural cladding and interior decorative elements • Industrial fabrication and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088 SS 1.4520 Coil manufactured to international standards for durability, corrosion resistance, and reliable performance. Our coils are well-suited for industrial, architectural, and automotive applications. For customized sizes, technical specifications, or guidance on material selection, contact Ladhani Metal Corporation #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts

EN 10088 SS 1.4521, also known as X2CrMoTi18-2, is a dual-stabilized ferritic stainless steel containing approximately 17.0–18.0% chromium and 1.8–2.5% molybdenum. Stabilized with titanium and niobium, this grade offers excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. Its molybdenum content significantly increases corrosion performance in chloride-containing environments, while titanium and niobium ensure improved weldability and structural stability during thermal cycles. EN 10088 1.4521 is widely used in applications that demand corrosion resistance, strength, and long-term durability. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10088 SS 1.4521 in plate, sheet, coil, and strip forms. Our plates are produced through controlled rolling, precision annealing, and high-quality finishing to deliver uniform thickness, superior flatness, and excellent mechanical properties suited for industrial fabrication and structural applications. Forms Available: plate, sheet, coil, strip Chemical Composition (%): • Carbon (C): ≤ 0.03 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Chromium (Cr): 17.0 – 18.0 • Molybdenum (Mo): 1.80 – 2.50 • Titanium (Ti): ≥ 5 × C • Niobium (Nb): ≤ 0.80 Mechanical Properties: • Tensile Strength: 450 – 600 MPa • Yield Strength (0.2% Proof): ≥ 260 MPa • Elongation: ≥ 20% • Hardness (HB): ≤ 200 Key Features: • Excellent corrosion resistance due to molybdenum addition • High resistance to pitting and crevice corrosion in chloride environments • Titanium and niobium stabilization for improved weldability • Good formability and fabrication characteristics • Enhanced resistance to stress corrosion cracking • Stable performance even at elevated temperatures Material Characteristics: EN 10088 SS 1.4521 Plate features a ferritic microstructure with dual stabilization, offering superior corrosion resistance and thermal stability. The molybdenum content strengthens its protective passive layer, while titanium and niobium additions prevent carbide precipitation during welding. This results in improved toughness, lower risk of grain coarsening, and reliable performance in mildly aggressive and chloride-rich environments. Applications: • Heat exchangers and pressure vessel equipment • Automotive exhaust systems • Architectural facades and cladding • Chemical processing equipment • Industrial kitchen equipment and appliances • Water treatment and desalination systems Conclusion: Ladhani Metal Corporation offers premium-quality EN 10088 SS 1.4521 Plate designed for corrosion resistance, thermal stability, and long-term mechanical performance. Manufactured according to international standards, our plates are ideal for industrial, architectural, and engineering applications. For custom sizes, technical details, or material selection support, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar #EN10088 #EN10088StainlessSteel #En10088SheetPlateCoilStrip #SSSheet #SSPlate #SSCoil #SSStrip #ColdRolledSteel #HotRolledSteel #CustomFabrication #CorrosionResistantSteel #DurableSteel #PrecisionEngineered #EN10088SSManufacturer #EN10088SSSupplier #EN10088SSExporter #ISOApproved #InternationalGradeSteel #HighPerformanceSteel #IndustrialSheet #IndustrialPlate #IndustrialCoil #IndustrialStrip #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelExporter #MetalFabrication #IndustrialApplications #ConstructionMaterials #EngineeringMaterials #OEMApplications #LadhaniMetals #MetalSupplier #MetalExporter #SteelIndustry #MarineSteelApplications #AutomotiveSteelApplications #ChemicalProcessingSteel #FoodProcessingSteel #PharmaGradeSteel #PowerGenerationSteel #HeatExchangerSteel #WaterTreatmentSteel #ArchitecturalSteel #IndustrialEquipmentSteel #CustomMetalSolutions #GlobalExporter #IndianManufacturer #TechnicalSpecifications #MaterialStandards #SteelFabricator #IndustrialSupplier #StainlessSteelIndia #StainlessSteelExporters #IndustrialMetals #MetalSheets #MetalPlates #MetalCoils #MetalStrips #SheetMetalProcessing #SteelFabrication #EngineeringProjects #OEMMetalSolutions #HighQualitySteel #LongLifeMaterial #FabricationMaterials #IndustrialSteel #StainlessSteelProducts