infrastructuresteel

EN 10083-3 25CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade designed for applications requiring good strength, reliable hardenability, and enhanced machinability. Due to the addition of sulphur (S), this grade offers improved machining performance, making it highly suitable for components that require extensive machining after processing in both plate and bar forms. With a nominal carbon content of approximately 0.25% and alloying elements such as chromium and molybdenum, 25CrMoS4 provides a balanced combination of strength, toughness, and wear resistance after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 25CrMoS4 alloy steel plates and bars, supplied with mill test certificates and strict quality assurance as per international standards. Forms of Supply (as per grade): Hot rolled plates Quenched and tempered plates Normalized plates Annealed plates Flame cut plates Cut-to-size plates Hot rolled round bars Black round bars Forged bars Bright bars Peeled bars Square bars Flat bars Hex bars Explanation of Designation (25CrMoS4): • 25 – Approx. 0.25% carbon content • Cr – Chromium for improved strength and hardenability • Mo – Molybdenum for enhanced hardenability and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.22 – 0.29 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: ≥ 12% • Hardness: 200 – 280 HB (depending on section size and heat treatment) Key Features: • Resulphurized Cr-Mo alloy steel with superior machinability • Good strength and toughness after heat treatment • Improved hardenability compared to carbon steels • Reliable fatigue resistance • Suitable for both plate fabrication and machined bar components Material Characteristics: EN 10083-3 25CrMoS4 alloy steel offers a strong combination of mechanical performance and machining efficiency. The chromium and molybdenum content enhances hardenability and strength, while sulphur addition improves chip formation during machining operations. It performs well in quenched and tempered conditions for structural and mechanical applications. Applications: • Machined shafts and transmission components • Structural and fabricated engineering parts • Automotive components • Industrial machinery parts • Heat-treated mechanical plates and bars Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 25CrMoS4 alloy steel plates and bars in a wide range of sizes and heat-treated conditions. With enhanced machinability, good strength, and dependable performance, 25CrMoS4 is an excellent choice for demanding engineering and industrial applications. For stock availability, custom sizes, or technical assistance, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 37CrS4 is a resulphurized chromium alloy steel grade designed for applications requiring good strength, improved hardenability, and enhanced machinability. The addition of sulphur (S) improves cutting performance, making this grade particularly suitable for high-speed machining and large-scale production of precision components. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37CrS4 steel provides a reliable balance of strength, wear resistance, and machinability after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (37CrS4): • 37 – Approx. 0.37% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.34 – 0.41 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9 – 11% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with improved machinability • Good strength and wear resistance after heat treatment • Better cutting performance for automatic machining • Suitable for medium to high-strength applications • Reliable hardenability compared to plain carbon steels Material Characteristics: EN 10083-3 37CrS4 alloy steel bar offers a strong combination of strength and machinability. The sulphur addition enhances chip formation and tool life during machining, while chromium improves hardenability and wear resistance. It is suitable for precision components requiring both mechanical strength and efficient production. Applications: • Machined shafts and spindles • Automotive transmission components • Gear blanks and mechanical parts • High-strength fasteners • Mass-produced engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 37CrS4 alloy steel bars in various sizes and finishes to meet industrial and machining requirements. With enhanced machinability and reliable mechanical properties, 37CrS4 steel bars are ideal for precision and high-volume engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.

EN 10083-3 41Cr4 is a chromium alloy steel grade designed for applications requiring high strength, good toughness, and improved hardenability after heat treatment. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41Cr4 steel delivers enhanced mechanical performance and wear resistance compared to lower carbon alloy steels. 41Cr4 alloy steel bars are widely used in components subjected to high torsional stress, bending loads, and dynamic forces. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality assurance to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41Cr4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength, hardenability, and wear resistance • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with higher carbon content for improved strength • Good hardenability and wear resistance • Suitable for quenching and tempering • Good fatigue resistance under dynamic loading • Reliable mechanical performance in heat-treated condition Material Characteristics: EN 10083-3 41Cr4 alloy steel bar provides a strong combination of strength, toughness, and abrasion resistance. The higher carbon content allows for greater hardness after heat treatment, while chromium enhances depth of hardening and wear resistance. Applications: • Shafts, spindles, and axles • Gears and pinions • High-strength bolts and fasteners • Automotive transmission components • Heat-treated engineering parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41Cr4 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With high strength, good hardenability, and reliable wear resistance, 41Cr4 steel bars are suitable for a wide range of industrial and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 20MnB5 is a boron-alloyed steel grade designed for applications requiring high strength, excellent hardenability, and good toughness after heat treatment. With a nominal carbon content of around 0.20% and the addition of boron, manganese, and chromium, 20MnB5 steel achieves significantly improved hardenability compared to conventional carbon steels. Supplied in bar and plate form, EN 10083-3 20MnB5 alloy steel is widely used in automotive, forging, and mechanical engineering applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for quenched and tempered alloy steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 20MnB5 alloy steel bars and plates. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar, hot rolled plates, quenched and tempered plates Explanation of Designation (20MnB5): • 20 – Approx. 0.20% carbon content • Mn – Manganese alloying element for strength and hardenability • B – Boron addition for enhanced hardenability • 5 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Boron (B): 0.0008 – 0.0050 • Chromium (Cr): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 12% • Hardness: 230 – 300 HB (after heat treatment) Key Features: • Boron alloy steel with excellent hardenability • High strength and good toughness after quenching and tempering • Uniform mechanical properties across bars and plates • Suitable for hot forging and press hardening • Cost-effective alternative to higher alloy steels Material Characteristics: EN 10083-3 20MnB5 alloy steel in bar and plate form offers a strong combination of strength, toughness, and hardenability due to its boron addition and controlled alloy content. It responds very well to heat treatment, enabling high and uniform hardness even in thicker sections, making it ideal for safety-critical and load-bearing components. Applications: • Automotive structural and safety components • Forged parts and press-hardened components • Shafts, axles, and suspension parts • High-strength plates for fabricated components • Heavy engineering and industrial applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 20MnB5 alloy steel bars and plates in relevant industrial forms with consistent quality and reliable performance. With excellent hardenability, high strength after heat treatment, and proven performance in automotive and forging applications, 20MnB5 alloy steel is a dependable choice for demanding engineering requirements. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-2 C55 is a high carbon non-alloy steel grade developed for applications that demand high strength, hardness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.55%, C55 steel offers superior mechanical performance compared to lower carbon grades and is suitable for components subjected to heavy loads and severe wear conditions. Supplied in bar form, EN 10083-2 C55 steel is commonly used in demanding mechanical and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C55 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C55): • C – Carbon steel • 55 – Approx. 0.55% carbon content Chemical Composition (% – typical limits): • Carbon (C): 0.52 – 0.60 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, normalized / quenched & tempered): • Tensile Strength: 700 – 850 MPa • Yield Strength: ≥ 380 MPa • Elongation: ≥ 10% • Hardness: 200 – 250 HB (can be significantly increased by heat treatment) Key Features: • High carbon steel with excellent strength and hardness • Outstanding response to quenching and tempering • Good wear resistance for heavy-duty applications • Suitable for induction hardening and surface hardening • Cost-effective alternative to alloy steels in wear-resistant components Material Characteristics: EN 10083-2 C55 steel bar delivers high hardness, strength, and wear resistance due to its higher carbon content. It can be heat treated to achieve very high surface and core hardness, making it ideal for highly stressed and wear-prone mechanical components where durability is critical. Applications: • Shafts, axles, and crankshafts • Gears, cams, and rollers • Pins, keys, and couplings • Forged and machined components • Heavy-duty mechanical and industrial parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C55 steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With high strength, excellent wear resistance, and superior heat-treatability, C55 steel bars are a reliable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10088-3 X5NiCrTiMoVB25-15-2 is a high-alloy, precipitation-hardenable stainless steel grade engineered for applications requiring very high strength, excellent toughness, and good corrosion resistance under demanding service conditions. Alloyed with nickel, chromium, molybdenum, titanium, vanadium, and boron, this grade offers superior mechanical performance, enhanced hardenability, and stability at elevated temperatures. Supplied in rod form, X5NiCrTiMoVB25-15-2 stainless steel is suitable for advanced engineering, aerospace, and high-stress industrial applications. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5NiCrTiMoVB25-15-2 stainless steel rods. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy in accordance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5NiCrTiMoVB25-15-2): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Ni25 – Approx. 25% nickel • Cr15 – Approx. 15% chromium • Mo – Molybdenum alloyed for strength and corrosion resistance • Ti – Titanium for stabilization and precipitation hardening • V – Vanadium for grain refinement and strength • B – Boron for improved hardenability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 14.0 – 16.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 1.5 – 2.5 • Titanium (Ti): 0.3 – 0.7 • Vanadium (V): 0.1 – 0.3 • Boron (B): ≤ 0.010 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution treated and aged): • Tensile Strength: 900 – 1,300 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: Typically 300 – 420 HB after aging Key Features: • High-alloy precipitation-hardenable stainless steel • Very high strength and toughness • Good corrosion resistance in aggressive environments • Excellent hardenability and thermal stability • Suitable for high-stress and high-temperature service • Good structural integrity after heat treatment Material Characteristics: EN 10088-3 X5NiCrTiMoVB25-15-2 stainless steel rod delivers an exceptional combination of strength, toughness, and corrosion resistance. Its complex alloying system and precipitation-hardening capability make it suitable for components subjected to extreme mechanical loads and demanding operating conditions. Applications: • Aerospace and defense components • High-strength shafts, rods, and fasteners • Turbine and power-generation parts • Heavy engineering and structural components • Specialized industrial machinery Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X5NiCrTiMoVB25-15-2 stainless steel rods with reliable mechanical performance and consistent quality. With very high strength, excellent toughness, and advanced alloy design, X5NiCrTiMoVB25-15-2 stainless steel rod is an ideal choice for critical engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiCuMo17-11-3-2 is a high-alloy austenitic stainless steel grade with chromium, nickel, copper, and molybdenum additions, designed for excellent corrosion resistance, mechanical strength, and toughness. The copper improves resistance to oxidizing acids, while molybdenum enhances pitting and crevice corrosion resistance. Supplied in bar form, X3CrNiCuMo17-11-3-2 stainless steel is suitable for chemical, marine, and industrial applications requiring superior corrosion resistance and structural integrity. This grade complies with the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCuMo17-11-3-2 stainless steel bars. All materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy in full compliance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCuMo17-11-3-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr17 – Approx. 17% chromium • Ni11 – Approx. 11% nickel • Cu3 – Approx. 3% copper for improved corrosion resistance • Mo – Molybdenum for enhanced pitting and crevice corrosion resistance • 2 – Optional notation for specific temper or property Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 16.5 – 17.5 • Nickel (Ni): 10.0 – 12.0 • Copper (Cu): 2.5 – 3.5 • Molybdenum (Mo): 2.5 – 3.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 250 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 220 HB Key Features: • Austenitic stainless steel with Cu and Mo alloying • Excellent resistance to oxidizing acids and chloride environments • High pitting and crevice corrosion resistance • Good toughness, ductility, and mechanical strength • Good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiCuMo17-11-3-2 stainless steel bar combines superior corrosion resistance with reliable mechanical properties. Copper and molybdenum alloying ensures durability in chemical, marine, and industrial applications while maintaining good fabrication performance. Applications: • Chemical and petrochemical process equipment • Seawater and marine components • Acid-resistant piping and fittings • Pressure vessels and heat exchangers • Industrial and structural components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiCuMo17-11-3-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high mechanical performance, and full EN 10088-3 compliance, X3CrNiCuMo17-11-3-2 stainless steel bar is a reliable choice for demanding chemical, marine, and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiCu18-9-4 is a high-alloy austenitic stainless steel grade with copper addition, designed for excellent corrosion resistance and moderate mechanical strength. The copper enhances resistance to acidic environments, particularly nitric acid, while the combination of chromium and nickel provides general corrosion resistance and good toughness. Supplied in bar form, X3CrNiCu18-9-4 stainless steel is suitable for chemical, marine, and industrial applications where reliable corrosion resistance is required. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCu18-9-4 stainless steel bars. All materials are sourced from approved mills and supplied with consistent chemical composition, stable mechanical properties, and precise dimensional accuracy according to EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCu18-9-4): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel • Cu4 – Approx. 4% copper for enhanced corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 3.5 – 4.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 200 HB Key Features: • Austenitic stainless steel with copper addition • Excellent resistance to nitric acid and oxidizing environments • Good general corrosion resistance and toughness • Good weldability and formability • Stable mechanical properties in fabricated components • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiCu18-9-4 stainless steel bar provides a reliable combination of corrosion resistance, mechanical stability, and workability. Copper alloying enhances its performance in acidic environments while maintaining general-purpose corrosion protection for industrial and marine applications. Applications: • Chemical processing equipment • Marine and offshore components • Industrial piping and fittings • Acidic process vessels and heat exchangers • General engineering and structural components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiCu18-9-4 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With enhanced corrosion resistance, copper alloying, and full EN 10088-3 compliance, X3CrNiCu18-9-4 stainless steel bar is a reliable choice for demanding chemical and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiMoN27-5-2 is a high-alloy austenitic stainless steel grade with elevated chromium and nitrogen content, designed for applications requiring exceptional corrosion resistance, high strength, and excellent resistance to pitting and crevice corrosion. The addition of molybdenum and nitrogen significantly enhances performance in aggressive and chloride-rich environments while improving mechanical strength. Supplied in rod form, X3CrNiMoN27-5-2 stainless steel is suitable for demanding industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMoN27-5-2 stainless steel rods. All materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMoN27-5-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr27 – Approx. 27% chromium • Ni5 – Approx. 5% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.04 • Chromium (Cr): 26.0 – 28.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Nitrogen (N): 0.20 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: ≥ 30% • Hardness: Typically ≤ 240 HB Key Features: • High-chromium, nitrogen-alloyed stainless steel • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength due to nitrogen strengthening • Good toughness and ductility • Good weldability with controlled procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiMoN27-5-2 stainless steel rod combines very high corrosion resistance with enhanced mechanical strength. Its alloying design ensures reliable performance in highly aggressive service environments while maintaining good formability and toughness. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Desalination plants and seawater systems • Pressure-containing parts • Structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiMoN27-5-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X3CrNiMoN27-5-2 stainless steel rod is an excellent choice for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-13-3 is a nitrogen-alloyed austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, high mechanical strength, and superior resistance to pitting and crevice corrosion. The combined addition of molybdenum and nitrogen enhances performance in chloride-bearing and aggressive environments while maintaining excellent toughness and ductility. Supplied in bar form, X2CrNiMoN17-13-3 stainless steel is widely used in chemical, marine, and heavy industrial applications where durability and long service life are essential. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-13-3 stainless steel bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-13-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ni13 – Approx. 13% nickel • Mo3 – Approx. 3% molybdenum • N – Nitrogen alloyed for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 12.0 – 14.0 • Molybdenum (Mo): 2.5 – 3.5 • Nitrogen (N): 0.10 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 320 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 240 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Excellent resistance to pitting and crevice corrosion • Higher strength than conventional austenitic grades • Excellent toughness and ductility • Very good weldability using standard procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiMoN17-13-3 stainless steel bar offers an excellent balance of corrosion resistance and mechanical strength. Nitrogen strengthening combined with molybdenum alloying ensures reliable performance in aggressive service environments while maintaining good formability and toughness. Applications: • Chemical and petrochemical processing equipment • Marine and offshore structures • Pressure vessels and heat exchangers • Industrial piping systems and fittings • Structural and load-bearing components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoN17-13-3 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X2CrNiMoN17-13-3 stainless steel bar is a dependable choice for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoV13-5-2 is a martensitic stainless steel grade alloyed with nickel, molybdenum, and vanadium, developed for applications requiring high strength, good toughness, and improved corrosion resistance compared to conventional martensitic steels. The addition of vanadium refines the grain structure and enhances wear resistance, while nickel improves toughness and molybdenum increases resistance to localized corrosion. Supplied in bar form, X2CrNiMoV13-5-2 stainless steel is widely used in high-performance engineering and industrial components. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoV13-5-2 stainless steel bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoV13-5-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr13 – Approx. 13% chromium • Ni5 – Approx. 5% nickel • Mo2 – Approx. 2% molybdenum • V – Vanadium alloyed for grain refinement and wear resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 12.0 – 14.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Vanadium (V): 0.10 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, quenched and tempered): • Tensile Strength: 850 – 1,050 MPa • Yield Strength: ≥ 650 MPa • Elongation: 12 – 15% • Hardness: Approx. 260 – 320 HB (depending on heat treatment) Key Features: • High-strength martensitic stainless steel • Good toughness due to nickel addition • Improved wear resistance from vanadium • Better corrosion resistance than standard martensitic grades • Heat-treatable for tailored mechanical properties • Suitable for demanding mechanical applications Material Characteristics: EN 10088-3 X2CrNiMoV13-5-2 stainless steel bar offers an excellent balance of strength, toughness, and corrosion resistance. Its alloying elements and martensitic structure allow it to perform reliably under high mechanical loads and dynamic stresses while maintaining reasonable corrosion performance. Applications: • Turbine and power generation components • Shafts, spindles, and high-stress machine parts • Oil and gas equipment • Engineering and industrial components • Wear-resistant mechanical parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiMoV13-5-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good toughness, and reliable corrosion resistance, X2CrNiMoV13-5-2 stainless steel bar is a dependable choice for advanced engineering and industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-11-2 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring enhanced strength, excellent corrosion resistance, and good resistance to pitting and crevice corrosion. The combined addition of molybdenum and nitrogen improves performance in chloride-containing and aggressive environments while maintaining good toughness and ductility. Supplied in rod form, X2CrNiMoN17-11-2 stainless steel is suitable for demanding industrial, marine, and chemical applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-11-2 stainless steel rods. Materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemistry, controlled mechanical properties, and precise dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-11-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ni11 – Approx. 11% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 10.0 – 12.0 • Molybdenum (Mo): 2.0 – 2.5 • Nitrogen (N): 0.10 – 0.22 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Improved strength compared to conventional austenitic grades • Excellent resistance to pitting and crevice corrosion • Good toughness and ductility • Very good weldability with standard procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiMoN17-11-2 stainless steel rod combines high corrosion resistance with enhanced mechanical strength due to nitrogen alloying. The molybdenum content further improves resistance to localized corrosion, making this grade suitable for severe service environments while retaining good formability and toughness. Applications: • Chemical and petrochemical equipment • Marine and offshore components • Pressure-containing parts • Industrial piping systems and fittings • Structural and load-bearing components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoN17-11-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X2CrNiMoN17-11-2 stainless steel rod is a dependable solution for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X9CrNi18-9 is an austenitic stainless steel grade offering good corrosion resistance, reliable mechanical strength, and excellent formability. With a balanced chromium–nickel composition, this grade provides good resistance to oxidation and general corrosive environments while maintaining good toughness over a wide temperature range. Supplied in bar and rod form, X9CrNi18-9 stainless steel is suitable for general engineering and industrial applications where consistent performance and ease of fabrication are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088-3 X9CrNi18-9 stainless steel bars and rods. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X9CrNi18-9): • X – High-alloy steel • 9 – Approx. 0.09% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.030 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Austenitic stainless steel with balanced Cr–Ni content • Good general corrosion and oxidation resistance • Excellent formability and weldability • Good toughness at low and elevated temperatures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X9CrNi18-9 stainless steel bar and rod provides a reliable combination of corrosion resistance, strength, and workability, making it suitable for a wide range of fabricated and machined components. Applications: • General engineering components • Shafts, fasteners, and machined parts • Chemical and process equipment • Food processing and handling machinery • Architectural and industrial fabrications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X9CrNi18-9 stainless steel bars and rods in round, hex, square, rectangular, flat, and rod forms. With dependable corrosion resistance and excellent fabrication characteristics, X9CrNi18-9 stainless steel bar is a practical choice for diverse industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiN18-10 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, improved strength, and good weldability. The controlled nitrogen addition enhances yield strength and resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in bar and rod form, X2CrNiN18-10 stainless steel is widely used in structural, engineering, and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN18-10 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN18-10): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 11.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength compared to standard X2CrNi18-9 • Excellent corrosion and pitting resistance • Good weldability with reduced risk of intergranular corrosion • Non-magnetic in annealed condition • Suitable for structural and load-bearing applications Material Characteristics: EN 10088-3 X2CrNiN18-10 stainless steel rod and bar offers an excellent combination of strength, corrosion resistance, and ductility. The nitrogen-enhanced austenitic structure ensures superior mechanical performance without sacrificing corrosion resistance. Applications: • Structural and load-bearing components • Chemical and petrochemical equipment • Pressure vessels and piping systems • Food processing and pharmaceutical industries • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiN18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, excellent corrosion resistance, and reliable weldability, X2CrNiN18-10 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X40CrMoVN16-2 is a martensitic stainless steel grade designed for applications requiring high strength, excellent toughness, good corrosion resistance, and superior fatigue performance. The combined addition of chromium, molybdenum, vanadium, and nitrogen improves hardenability, wear resistance, and grain refinement, making this grade suitable for demanding mechanical and engineering applications. Supplied in bar and rod form, X40CrMoVN16-2 stainless steel complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X40CrMoVN16-2 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X40CrMoVN16-2): • X – High-alloy steel • 40 – Approx. 0.40% carbon content • Cr16 – Approx. 16% chromium • Mo – Molybdenum addition for improved strength and corrosion resistance • V – Vanadium addition for grain refinement and wear resistance • N – Nitrogen addition for enhanced strength and toughness Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.44 • Chromium (Cr): 15.0 – 17.0 • Molybdenum (Mo): 0.80 – 1.20 • Vanadium (V): 0.10 – 0.30 • Nitrogen (N): 0.03 – 0.10 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 900 – 1,100 MPa • Yield Strength: ≥ 700 MPa • Elongation: 10 – 14% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-strength martensitic stainless steel • Excellent toughness and fatigue resistance • Improved wear resistance due to Mo and V additions • Good corrosion resistance compared to standard martensitic grades • Heat-treatable for enhanced mechanical performance • Suitable for high-load and dynamic applications Material Characteristics: EN 10088-3 X40CrMoVN16-2 stainless steel rod and bar offers a strong combination of strength, toughness, and corrosion resistance. Its martensitic microstructure, refined by vanadium and nitrogen, ensures reliable performance under high stress and cyclic loading conditions. Applications: • Turbine and power plant components • Shafts, rotors, and spindles • High-performance mechanical and structural parts • Pump and valve components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X40CrMoVN16-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent mechanical strength, toughness, and wear resistance, X40CrMoVN16-2 stainless steel bar is a reliable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X14CrMoS17 is a free-machining martensitic stainless steel grade designed for applications requiring good strength, enhanced machinability, improved wear resistance, and moderate corrosion resistance. The addition of molybdenum improves hardenability and resistance to pitting, while sulphur enhances machinability, making this grade ideal for precision machining and mass-produced components. Supplied in bar and rod form, X14CrMoS17 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X14CrMoS17 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X14CrMoS17): • X – High-alloy steel • 14 – Approx. 0.14% carbon content • Cr17 – Approx. 17% chromium • Mo – Molybdenum addition for improved strength and corrosion resistance • S – Sulphur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.30 – 0.60 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: 10 – 14% • Hardness: Can be increased by quenching and tempering Key Features: • Free-machining martensitic stainless steel • Improved machinability due to sulphur addition • Good strength and wear resistance • Better pitting resistance compared to standard 13% Cr grades • Heat-treatable for enhanced mechanical performance • Suitable for precision-machined components Material Characteristics: EN 10088-3 X14CrMoS17 stainless steel rod and bar offers a balanced combination of strength, machinability, and corrosion resistance. Its martensitic structure allows effective heat treatment while maintaining excellent machining performance for high-volume production. Applications: • Precision-machined shafts and pins • Valve and pump components • Fasteners and fittings • Automotive and engineering parts • Industrial machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X14CrMoS17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced machinability, reliable strength, and improved corrosion resistance, X14CrMoS17 stainless steel bar is a dependable choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X30Cr13 is a high-carbon martensitic stainless steel grade designed for applications requiring very high hardness, excellent wear resistance, and good edge retention along with moderate corrosion resistance. With increased carbon content compared to X20Cr13, this grade achieves superior hardness after quenching and tempering, making it suitable for precision mechanical and tooling components. Supplied in rod and bar form, X30Cr13 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X30Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X30Cr13): • X – High-alloy steel • 30 – Approx. 0.30% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.35 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 850 – 1,050 MPa • Yield Strength: ≥ 650 MPa • Elongation: 8 – 12% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance • Good edge retention and strength • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for maximum mechanical performance • Suitable for precision and high-stress components Material Characteristics: EN 10088-3 X30Cr13 stainless steel rod and bar provides very high hardness potential combined with good mechanical strength. Its martensitic microstructure enables superior wear resistance, making it ideal for components exposed to friction, cutting, or repeated mechanical loading. Applications: • Cutting tools and blades • Shafts, pins, and spindles • Pump and valve components • Industrial tooling and machine parts • Mechanical and engineering assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X30Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness potential, strong mechanical properties, and dependable corrosion resistance, X30Cr13 stainless steel rod is a reliable choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X20Cr13 is a martensitic stainless steel grade developed for applications requiring higher strength, hardness, and wear resistance along with moderate corrosion resistance. With increased carbon content compared to X12Cr13, this grade can achieve higher hardness levels after heat treatment, making it suitable for demanding mechanical and tooling applications. Supplied in bar and rod form, X20Cr13 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X20Cr13 stainless steel rods and bars. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 specifications, ensuring consistent quality, precise chemical composition, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X20Cr13): • X – High-alloy steel • 20 – Approx. 0.20% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.16 – 0.25 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 550 MPa • Elongation: 10 – 14% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with higher carbon content • Excellent hardness and wear resistance after heat treatment • Moderate corrosion resistance in atmospheric and mildly corrosive environments • Good machinability in annealed condition • Suitable for high-stress mechanical components Material Characteristics: EN 10088-3 X20Cr13 stainless steel rod and bar offers high strength and hardness with reliable corrosion resistance. Its martensitic structure enables effective heat treatment, making it ideal for components subjected to heavy loads and wear. Applications: • Shafts, spindles, and axles • Valve parts and pump components • Tooling and mechanical parts • Turbine and power plant components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X20Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high hardness potential, good mechanical strength, and dependable corrosion resistance, X20Cr13 stainless steel bar is a strong choice for demanding engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiCu19-9-2 is a precipitation-hardening austenitic stainless steel grade designed for applications requiring good corrosion resistance combined with higher strength achieved through age hardening. The controlled addition of copper enables precipitation strengthening, while chromium and nickel provide reliable resistance to general corrosion and oxidation. Supplied in bar and rod form, X3CrNiCu19-9-2 stainless steel is widely used in engineering and industrial components where strength, toughness, and corrosion resistance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCu19-9-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiCu19-9-2 – Approx. 19% chromium, 9% nickel, 2% copper Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 1.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 600 – 900 MPa (higher after aging) • Yield Strength: ≥ 300 MPa (can be significantly increased by precipitation hardening) • Elongation: 20 – 35% • Hardness: Typically 180 – 280 HB (after aging) Key Features: • Precipitation-hardening austenitic stainless steel • Good general corrosion resistance • Higher strength achievable through age hardening • Good toughness and fatigue resistance • Good weldability in solution-annealed condition • Suitable for structural and mechanical components Material Characteristics: EN 10088-3 X3CrNiCu19-9-2 stainless steel rod and bar offers a useful combination of corrosion resistance and enhanced strength through precipitation hardening. Its austenitic structure ensures good toughness and formability, while copper addition enables strength improvement for demanding service conditions. Applications: • Shafts, fasteners, and structural components • Mechanical and engineering parts • Pump and valve components • Aerospace and industrial hardware • Components requiring higher strength with corrosion resistance Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, precipitation-hardening capability, and reliable mechanical performance, X3CrNiCu19-9-2 stainless steel bar is a dependable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoCuN20-18-7 is a high-alloy austenitic stainless steel grade engineered for severe corrosive environments where excellent resistance to pitting, crevice corrosion, and stress corrosion cracking is required. The balanced addition of chromium, nickel, molybdenum, copper, and nitrogen provides superior performance in acidic, chloride-rich, and chemically aggressive conditions. Supplied in rod and bar form, X1CrNiMoCuN20-18-7 stainless steel is commonly used in chemical processing and critical industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN20-18-7): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN20-18-7 – Approx. 20% chromium, 18% nickel, 7% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 17.0 – 19.0 • Molybdenum (Mo): 6.0 – 7.5 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with excellent corrosion resistance • Outstanding resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-containing environments • High ductility and toughness • Very good weldability • Suitable for severe chemical and industrial applications Material Characteristics: EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rod and bar offers exceptional corrosion resistance combined with excellent mechanical properties. Its austenitic microstructure ensures long service life, high toughness, and reliable performance in aggressive service conditions. Applications: • Chemical and petrochemical processing equipment • Acid handling and storage systems • Offshore and marine components • Desalination and seawater treatment plants • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN20-18-7 stainless steel rod is an excellent choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiMo17-13-3 is a low-carbon austenitic stainless steel grade engineered for excellent corrosion resistance, high toughness, and reliable mechanical strength. With balanced additions of chromium, nickel, and molybdenum, this grade offers strong resistance to pitting and crevice corrosion in chloride-bearing and aggressive environments while maintaining good weldability. Supplied in rod and bar form, X3CrNiMo17-13-3 stainless steel is widely used in industrial, chemical, and marine applications where durability and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMo17-13-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and dependable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMo17-13-3): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiMo17-13-3 – Approx. 17% chromium, 13% nickel, and 3% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 12.0 – 14.0 • Molybdenum (Mo): 2.5 – 3.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with molybdenum addition • Excellent resistance to pitting and crevice corrosion • Very good weldability and resistance to intergranular corrosion • High toughness and ductility • Non-magnetic in annealed condition • Suitable for aggressive chemical and marine environments Material Characteristics: EN 10088-3 X3CrNiMo17-13-3 stainless steel rod and bar provides enhanced corrosion resistance along with stable mechanical properties. Its alloy design ensures dependable performance in harsh service environments requiring long-term reliability. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Food processing and pharmaceutical equipment • Shafts, fasteners, and machined parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiMo17-13-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good weldability, and reliable mechanical performance, X3CrNiMo17-13-3 stainless steel rod is a dependable choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiSi18-15-4 is a high-alloy austenitic stainless steel grade characterized by excellent oxidation resistance, good corrosion resistance, and stable mechanical properties at elevated temperatures. The addition of silicon significantly enhances resistance to scaling and oxidation, making this grade suitable for high-temperature and thermal cycling applications. Supplied in rod and bar form, X1CrNiSi18-15-4 stainless steel is widely used in industrial and engineering components exposed to heat, corrosive gases, and demanding service conditions. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiSi18-15-4): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiSi18-15-4 – Approx. 18% chromium, 15% nickel, and 4% silicon Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 14.0 – 16.0 • Silicon (Si): 3.0 – 4.5 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 35 – 45% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with high silicon content • Excellent oxidation and scaling resistance at elevated temperatures • Good corrosion resistance in many environments • High toughness and ductility • Non-magnetic in annealed condition • Suitable for continuous high-temperature service Material Characteristics: EN 10088-3 X1CrNiSi18-15-4 stainless steel rod and bar offers reliable performance in high-temperature and oxidizing environments. Its silicon-enhanced alloy design ensures resistance to scaling and thermal degradation while maintaining good mechanical strength. Applications: • Furnace components and heat treatment fixtures • Exhaust systems and thermal equipment • Chemical processing and petrochemical equipment • Power generation and industrial heaters • High-temperature engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent oxidation resistance, good corrosion performance, and stable high-temperature properties, X1CrNiSi18-15-4 stainless steel rod is an ideal choice for demanding thermal and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10025-3 S420N is a high-strength normalized fine-grain structural steel grade developed for demanding structural and fabrication applications where higher yield strength, good toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S420N steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and reliable performance. This grade complies with EN 10025-3 and is suitable for structures subjected to moderate and low-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S420N steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: sheet, plate, coil, strip Grades Available: S420N, S420NL Explanation of Designation: • S – Structural steel • 420 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.70 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.60 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 520 – 680 MPa • Yield Strength: ≥ 420 MPa • Elongation: 19% (for thickness ≤ 16 mm) Key Features: • Normalized delivery for stable and consistent properties • High yield strength for demanding load-bearing applications • Good impact toughness at lower temperatures • Excellent weldability with controlled heat input • Fine-grain structure for enhanced strength and toughness • Available in sheet, plate, coil, and strip forms Material Characteristics: S420N steel sheet offers a strong balance of high strength, ductility, and toughness. The fine-grain microstructure obtained through normalization ensures predictable fabrication behavior and dependable structural performance in demanding environments. Applications: • Heavy structural fabrication and steel construction • Bridges, cranes, and lifting equipment • Industrial plants and machinery structures • Construction and civil engineering projects • Load-bearing components in low-temperature service Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S420N steel sheets along with plates, coils, and strips for high-strength structural applications. With normalized delivery, excellent mechanical properties, and compliance with EN 10025-3 standards, S420N steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-2 S235J0 is a low carbon structural steel grade designed for general structural applications in construction, fabrication, and engineering projects. Supplied in sheet, plate, coil, and strip form, S235J0 steel offers excellent weldability, good formability, and uniform mechanical properties, making it suitable for components that require moderate strength and verified impact performance at lower temperatures. This grade is part of the EN 10025-2 standard for non-alloy structural steels. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S235J0 steel sheets, plates, coils, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and compliance with EN 10025-2 standards for structural applications. Forms Available: sheet, plate, coil, strip Grades Available: S235JR, S235J0, S235J2, S235K2 Explanation of Designation: • S – Structural steel • 235 – Minimum yield strength in MPa (other options include 185, 275, 355) • J0 – Impact test at 0°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.40 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 360 – 510 MPa • Yield Strength: ≥ 235 MPa • Elongation: 26% (for thickness ≤ 16 mm) Key Features: • Excellent weldability using standard welding processes • Good formability and ease of fabrication • Uniform mechanical properties across thickness ranges • Suitable for moderate temperature and low-stress structural applications • Cost-effective solution for general structural projects • Available in multiple forms: sheet, plate, coil, and strip Material Characteristics: S235J0 steel provides a balanced combination of strength, ductility, and toughness with verified impact performance at 0°C. The steel is easily cut, welded, rolled, and fabricated into structural components such as beams, plates, frames, and industrial assemblies. Applications: • Structural steel fabrication for buildings and bridges • Industrial machinery bases and supports • Frames, beams, and plates for construction projects • Pressure vessels for non-critical applications • Automotive and transportation components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-2 S235J0 steel in sheet, plate, coil, and strip forms for structural and fabrication applications. With excellent weldability, verified impact performance at 0°C, and compliance with EN 10025-2 standards, S235J0 is a reliable and economical choice for general structural engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj