Top EN 10088 SS sheet plate coil strip,EN 10088-3 ss bar & rod,EN 10084 round bars Products in Mumbai at best prices

EN 10025-3 S420N Steel Sheet

EN 10025-3 S420N is a high-strength normalized fine-grain structural steel grade developed for demanding structural and fabrication applications where higher yield strength, good toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S420N steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and reliable performance. This grade complies with EN 10025-3 and is suitable for structures subjected to moderate and low-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S420N steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: sheet, plate, coil, strip Grades Available: S420N, S420NL Explanation of Designation: • S – Structural steel • 420 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.70 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.60 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 520 – 680 MPa • Yield Strength: ≥ 420 MPa • Elongation: 19% (for thickness ≤ 16 mm) Key Features: • Normalized delivery for stable and consistent properties • High yield strength for demanding load-bearing applications • Good impact toughness at lower temperatures • Excellent weldability with controlled heat input • Fine-grain structure for enhanced strength and toughness • Available in sheet, plate, coil, and strip forms Material Characteristics: S420N steel sheet offers a strong balance of high strength, ductility, and toughness. The fine-grain microstructure obtained through normalization ensures predictable fabrication behavior and dependable structural performance in demanding environments. Applications: • Heavy structural fabrication and steel construction • Bridges, cranes, and lifting equipment • Industrial plants and machinery structures • Construction and civil engineering projects • Load-bearing components in low-temperature service Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S420N steel sheets along with plates, coils, and strips for high-strength structural applications. With normalized delivery, excellent mechanical properties, and compliance with EN 10025-3 standards, S420N steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 sheet, plate, coil & strip

EN 10025-3 S275NL Steel Plate

EN 10025-3 S275NL is a normalized fine-grain structural steel grade designed for structural and fabrication applications requiring reliable strength and enhanced impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S275NL steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for use in applications where impact testing at −50°C is specified. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S275NL steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, uniform mechanical properties, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S275N, S275NL Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Guaranteed impact toughness at −50°C • Normalized delivery for consistent mechanical properties • Excellent weldability with standard welding procedures • Fine-grain structure for improved toughness and strength • Suitable for low-temperature and offshore applications • Available in plate, sheet, coil, and strip forms Material Characteristics: S275NL steel plate offers enhanced low-temperature toughness combined with reliable strength and good fabrication properties. The fine-grain microstructure and normalized condition ensure stable performance in demanding service environments, including cold climates. Applications: • Structural steel fabrication in cold and sub-zero environments • Bridges, offshore structures, and heavy steel construction • Industrial and power plant structures • Storage tanks and pressure-related structural components • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S275NL steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S275NL steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-2 sheet, plate, coil & strip

EN 10025-2 S355JR Steel Coil

EN 10025-2 S355JR is a high-strength non-alloy structural steel grade designed for demanding structural and fabrication applications where higher load-bearing capacity is required. Supplied in coil, sheet, plate, and strip form, S355JR steel offers excellent weldability, good formability, and superior mechanical properties compared to S235 and S275 grades. This grade complies with the EN 10025-2 standard and is suitable for general structural use under normal atmospheric conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S355JR steel coils, sheets, plates, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications. Forms Available: coil, sheet, plate, strip Grades Available: S355JR, S355J0, S355J2, S355K2 Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • JR – Impact test at +20°C • J0 – Impact test at 0°C • J2 – Impact test at −20°C • K2 – Impact test at −20°C with higher impact energy (40 J) Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.24 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Higher strength compared to S235 and S275 grades • Excellent weldability using standard welding processes • Good formability for rolling and fabrication • Uniform mechanical properties across thickness ranges • Suitable for heavy-duty structural applications • Available in coil, sheet, plate, and strip forms Material Characteristics: S355JR steel coil offers a strong balance of high strength, toughness, and fabrication ease. The steel can be efficiently processed into structural components, profiles, and fabricated parts while maintaining excellent mechanical performance and structural reliability. Applications: • Structural steel fabrication for buildings and bridges • Heavy-duty frames, beams, and supports • Industrial machinery and equipment • Construction and civil engineering projects • Automotive and transportation components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-2 S355JR steel coils along with sheets, plates, and strips for high-strength structural applications. With excellent weldability, superior mechanical properties, and compliance with EN 10025-2 standards, S355JR steel coil is a reliable and economical choice for demanding engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 S420N Steel Sheet

EN 10025-3 S275NL Steel Plate

EN 10025-2 S355JR Steel Coil

civilengineeringsteel

Subcategory Tags

Contact Us