m s

ASTM A36 Carbon Structural Steel is a widely used low-carbon structural steel known for its excellent strength, weldability, machinability, and versatility. This material is extensively used in structural and construction applications where dependable mechanical properties and economical performance are required. Manufactured in accordance with ASTM A36, this specification covers carbon structural steel shapes, plates, bars, and other structural components intended for welded, bolted, or riveted construction. The standard ensures controlled chemical composition, mechanical properties, and dimensional tolerances for reliable structural performance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A36 Carbon Structural Steel, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Plates, Sheets, Coils, Round bars, Flat bars, Square bars, Hex bars, Angles, Channels, Beams, H-Beams, I-Beams, T-Beams, Structural sections, Pipes, Tubes, Hollow sections, Strips, Chequered plates, Forged components, Custom fabricated components Available Grades (as per ASTM A36): ASTM A36 Carbon Steel Scope of Specification: • Covers carbon structural steel products for structural applications • Suitable for welded, bolted, and riveted structures • Includes plates, bars, shapes, and structural sections • Supplied in hot rolled, normalized, or fabricated condition Typical Chemical Composition: • Carbon (C): Max 0.26% • Manganese (Mn): 0.60 – 0.90% • Phosphorus (P): Max 0.040% • Sulphur (S): Max 0.050% • Silicon (Si): Max 0.40% • Copper (Cu): Min 0.20% (when copper steel is specified) Mechanical Properties: • Tensile Strength: 400 – 550 MPa • Yield Strength: Min 250 MPa • Elongation: Min 20% • Good weldability and machinability • Excellent formability for fabrication Key Features: • Good strength and toughness • Excellent weldability and machinability • Easy fabrication and forming • Cost-effective structural material • Widely available in multiple forms and sizes Material Characteristics: ASTM A36 carbon structural steel provides an excellent balance of strength, ductility, and fabrication properties. Its low carbon content allows easy welding, cutting, and machining, making it suitable for a broad range of structural and engineering applications. Applications: • Structural construction • Bridges and buildings • Industrial platforms and walkways • Machinery and equipment frames • Storage tanks and supports • General engineering and fabrication work • Infrastructure and commercial projects Conclusion: Ladhani Metal Corporation supplies high-quality ASTM A36 Carbon Structural Steel in a wide range of forms, sizes, and specifications. With excellent structural performance, weldability, and fabrication properties, this material is widely used in construction, industrial, and engineering applications. For stock availability, customized specifications, or technical details, contact Ladhani Metal Corporation. #ASTMA36 #ASTMA36Steel #ASTMA36Plate #ASTMA36Sheet #ASTMA36Bar #ASTMA36RoundBar #ASTMA36CarbonSteel #ASTMA36StructuralSteel #ASTMA36Material #ASTMA36Specification #ASTMA36Equivalent #ASTMA36Properties #ASTMA36ChemicalComposition #ASTMA36MechanicalProperties #ASTMA36SteelPlate #ASTMA36HotRolledPlate #ASTMA36MildSteel #ASTMA36MSPlate #ASTMA36FlatBar #ASTMA36SteelBar #ASTMA36Angle #ASTMA36Channel #ASTMA36Beam #ASTMA36StructuralPlate #ASTMA36SteelSupplier #ASTMA36Stockist #ASTMA36Exporter #ASTMA36Manufacturer #ASTMA36CarbonPlate #ASTMA36IndustrialSteel #ASTMA36EngineeringSteel #ASTMA36ConstructionSteel #ASTMA36FabricationSteel #ASTMA36HeavyEngineering #ASTMA36PressureParts #ASTMA36BoilerSteel #ASTMA36IndustrialApplications #CarbonSteelPlate #CarbonSteelBars #StructuralSteelPlate #HotRolledSteel #SteelPlateSupplier #IndustrialSteelSupplier #MildSteelPlate #SteelStockholder #SteelEngineering #SteelFabrication #ASTMStandards #StructuralSteel #CarbonSteelProducts #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ASTM A322 Alloy Steel Bars are hot-wrought alloy steel bars designed for applications requiring high strength, toughness, and wear resistance. These bars are widely used in engineering and industrial components where enhanced mechanical properties and durability are essential. Manufactured in accordance with ASTM A322, this specification covers hot-wrought alloy steel bars with controlled chemical composition and mechanical properties. The standard ensures consistent quality, dimensional accuracy, and reliable performance for critical applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A322 Alloy Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Round bars, Square bars, Hex bars, Flat bars, Hot rolled bars, Forged bars, Peeled bars Available Grades (as per ASTM A322): 1330, 1335, 1340, 1345, 4023, 4024, 4027, 4028, 4037, 4047, 4118, 4120, 4121, 4130, 4137, 4140, 4142, 4145, 4147, 4150, 4161, 4320, 4340, E4340, 4615, 4620, 4621, 4626, 4720, 4815, 4817, 4820, 5117, 5120, 5130, 5132, 5135, 5140, 5150, 5155, 5160, E52100, 6118, 6150, 8615, 8617, 8620, 8622, 8625, 8627, 8630, 8637, 8640, 8642, 8645, 8655, 8720, 8740, 8822, 9259, 9260, 50B44, 50B46, 50B50, 50B60, 51B60, 81B45, 94B17, 94B30 Scope of Specification: • Covers hot-wrought alloy steel bars for engineering applications • Suitable for heat treatment processes such as quenching and tempering • Includes a wide range of alloy compositions for different strength levels • Supplied in hot rolled, annealed, or heat-treated conditions Typical Chemical Composition (varies by grade): • Carbon (C): Provides strength and hardness • Chromium (Cr): Improves hardenability and wear resistance • Nickel (Ni): Enhances toughness and impact resistance • Molybdenum (Mo): Increases strength and high-temperature performance • Manganese (Mn) & Silicon (Si): Improve strength and deoxidation • Phosphorus (P) & Sulphur (S): Restricted to specified limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength and yield strength • Excellent toughness and impact resistance • Good fatigue resistance • Suitable for heat-treated applications Key Features: • Superior strength and toughness • Excellent wear and fatigue resistance • Good machinability and heat treatment capability • Wide range of alloy grades available • Reliable performance in demanding conditions Material Characteristics: ASTM A322 alloy steel bars provide a balance of strength, toughness, and wear resistance. Alloying elements such as chromium, nickel, and molybdenum enhance hardenability and mechanical performance, making these bars suitable for high-stress and heavy-duty applications. Applications: • Automotive components (shafts, gears, axles) • Oil and gas equipment • Machinery and heavy equipment • Power transmission components • Aerospace and defense applications • General engineering components Conclusion: Ladhani Metal Corporation supplies high-quality ASTM A322 Alloy Steel Bars in a wide range of grades, sizes, and finishes. With excellent mechanical properties and durability, these bars are widely used in industrial, automotive, and engineering applications. For stock availability, customized specifications, or technical details, contact Ladhani Metal Corporation. #ASTMA322 #ASTMA322AlloySteelBars #AlloySteelBars #SteelBars #HotRolledSteelBars #AlloySteel #EngineeringSteel #IndustrialSteel #CarbonSteelBars #ForgedSteelBars #RoundBars #SteelRoundBars #AlloyBars #ASTMSteel #SteelSupplier #SteelManufacturer #MetalIndustry #IndustrialMaterials #ConstructionSteel #MechanicalSteel #HighStrengthSteel #HeatTreatableSteel #MachiningSteel #PrecisionSteel #ToolSteel #SpringSteel #BearingSteel #AutomotiveSteel #AISI4140 #AISI4340 #AISI8620 #AISI52100 #NickelChromiumSteel #MolybdenumSteel #ChromiumSteel #SteelStockist #SteelExporter #SteelIndia #MumbaiSteelSupplier #LadhaniMetals #IndustrialSupply #HeavyEngineering #MachineComponents #OilAndGasSteel #AerospaceSteel #ForgingMaterial #SteelProducts #AlloySteelSupplier #SteelDistributors #Metallurgy #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ASTM A204 / A204M Alloy Steel Plates are molybdenum alloy steel plates designed for use in pressure vessels and boilers operating at moderate and elevated temperatures. These plates provide improved strength, creep resistance, and durability compared to standard carbon steel plates, making them suitable for high-temperature service conditions. Manufactured in accordance with ASTM A204/A204M, this specification covers molybdenum alloy steel plates intended for pressure vessel applications. The addition of molybdenum enhances high-temperature strength and resistance to creep deformation. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A204 / A204M Alloy Steel Plates, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled plates, Pressure vessel plates, Boiler plates, Normalized plates, Heat-treated plates Available Grades (as per ASTM A204 / A204M): Grade A, Grade B, Grade C Scope of Specification: • Covers molybdenum alloy steel plates for pressure vessels • Suitable for moderate and elevated temperature service • Supplied in normalized or heat-treated condition • Designed for improved creep resistance Typical Chemical Composition (varies by grade): • Carbon (C): Controlled for weldability and strength • Molybdenum (Mo): Enhances high-temperature strength and creep resistance • Manganese (Mn): Improves strength and toughness • Silicon (Si): Used as a deoxidizer • Phosphorus (P) & Sulphur (S): Restricted to specified maximum limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Good yield strength • Improved creep resistance • Suitable for pressure-containing applications Key Features: • Excellent high-temperature strength • Improved resistance to creep deformation • Good weldability • Reliable performance in pressure vessels • Suitable for thermal and industrial applications Material Characteristics: ASTM A204 / A204M alloy steel plates are specifically engineered for pressure vessel service at elevated temperatures. The presence of molybdenum enhances strength and resistance to thermal stress, ensuring durability and long service life under demanding operating conditions. Applications: • Pressure vessels • Boilers • Heat exchangers • Petrochemical plants • Refinery equipment • Power generation systems Conclusion: Ladhani Metal Corporation supplies high-quality ASTM A204 / A204M Alloy Steel Plates in various grades and thicknesses. With excellent high-temperature properties and reliable mechanical performance, these plates are widely used in pressure vessel and industrial applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ASTMA204 #ASTMA204M #ASTMA204Plates #AlloySteelPlates #MolybdenumSteel #MolySteelPlates #PressureVesselSteel #BoilerPlates #AlloySteelSheets #IndustrialSteel #SteelPlates #HeavySteelPlates #HighTemperatureSteel #HeatResistantSteel #PressureVesselPlates #EngineeringSteel #IndustrialMaterials #SteelManufacturers #SteelSuppliers #SteelExporters #PlateManufacturers #BoilerQualitySteel #FabricationSteel #OilAndGasSteel #PetrochemicalSteel #PowerPlantSteel #RefinerySteel #StructuralSteelPlates #SteelIndustry #MetalIndustry #CarbonAlloySteel #HighStrengthSteel #WeldableSteel #IndustrialApplications #SteelSolutions #QualitySteel #GlobalSteel #MadeInIndiaSteel #LadhaniMetal #LadhaniMetalCorporation #B2BSteel #SteelTrading #PlateStockist #AlloySteelSupplier #PressureEquipmentSteel #ThermalPowerSteel #IndustrialSupply #MetalFabrication #SteelEngineering #HeavyEngineering#Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ASTM A202/A202M Pressure Vessel Plates are alloy steel plates designed for use in welded pressure vessels and boilers where improved notch toughness and resistance to moderate temperature service are required. These plates are typically chromium-manganese-silicon alloy steels that provide enhanced strength and durability compared to standard carbon steel plates. Manufactured in accordance with ASTM A202/A202M, this specification covers alloy steel plates intended for pressure vessel applications, particularly where better toughness and mechanical performance are necessary under varying temperature conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A202/A202M Pressure Vessel Plates, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled plates, Pressure vessel plates, Boiler quality plates, Normalized plates, Heat-treated plates Available Grades (as per ASTM A202/A202M): Grade A, Grade B Scope of Specification: • Covers chromium-manganese-silicon alloy steel plates • Intended for welded pressure vessels and boilers • Suitable for moderate temperature service • Supplied in normalized or heat-treated condition Typical Chemical Composition (varies by grade): • Carbon (C): Controlled for strength and weldability • Manganese (Mn): Improves strength and toughness • Silicon (Si): Enhances strength and oxidation resistance • Chromium (Cr): Improves corrosion resistance and hardenability • Phosphorus (P) & Sulphur (S): Limited to specified maximum levels Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Good yield strength • Improved notch toughness • Suitable for pressure-containing applications Key Features: • Enhanced strength compared to carbon steel plates • Good weldability • Improved toughness at moderate temperatures • Reliable performance in pressure vessel applications • Suitable for fabrication and forming Material Characteristics: ASTM A202/A202M plates are alloy steels specifically designed for pressure vessel use. The presence of chromium, manganese, and silicon improves strength, toughness, and resistance to service conditions, making these plates suitable for critical industrial applications. Applications: • Pressure vessels • Boilers • Heat exchangers • Petrochemical equipment • Storage tanks • Industrial process equipment Conclusion: Ladhani Metal Corporation supplies high-quality ASTM A202/A202M Pressure Vessel Plates in various thicknesses and grades. With excellent mechanical properties and reliable performance, these plates are widely used in pressure vessel fabrication and industrial applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ASTMA202 #ASTMA202M #ASTMA202Plate #AlloySteelPlates #PressureVesselPlates #CrMnSiSteel #ChromiumSteel #ManganeseSteel #SiliconSteel #AlloySteel #BoilerPlate #PressureVesselSteel #SteelPlates #IndustrialSteel #HighStrengthSteel #EngineeringSteel #ConstructionSteel #FabricationSteel #HeavyEngineering #MetalIndustry #SteelIndustry #SteelProducts #PlateManufacturer #PlateSupplier #PlateStockist #SteelManufacturer #SteelSupplier #SteelStockist #IndustrialSupply #PowerPlantSteel #PetrochemicalSteel #OilAndGasSteel #EnergySectorSteel #InfrastructureSteel #ManufacturingSteel #SteelFabrication #GlobalSteel #IndiaSteel #MumbaiSteel #SteelExport #SteelTrading #QualitySteel #SteelSolutions #CarbonAlloySteel #FlatSteel #MetalPlates #PlateIndustry #EngineeringMaterials #IndustrialMaterials #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly @Mumbai @Delhi @Chennai @Kolkata @Hyderabad @Bengaluru

EN 10083-3 42CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade developed for applications requiring very high strength, excellent hardenability, and improved machinability. With a nominal carbon content of approximately 0.42%, this grade delivers superior tensile strength and wear resistance after quenching and tempering, while the addition of sulphur (S) enhances machining efficiency compared to 42CrMo4. Manufactured in accordance with EN 10083-3, 42CrMoS4 steel is widely used in heavy-duty engineering applications where components must withstand high stress and dynamic loading. Chromium improves hardenability and wear resistance, while molybdenum increases strength and resistance to tempering softening. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 42CrMoS4 alloy steel bars, supplied with mill test certificates and strict quality assurance as per international standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars Explanation of Designation (42CrMoS4): • 42 – Approx. 0.42% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1200 MPa • Yield Strength: ≥ 850 MPa • Elongation: ≥ 9 – 11% • Hardness: 280 – 340 HB (depending on section size and heat treatment) Key Features: • Very high tensile and yield strength • Excellent hardenability for thick sections • Improved machinability compared to 42CrMo4 • Good fatigue and impact resistance • Suitable for heavy-duty, precision-machined components Material Characteristics: EN 10083-3 42CrMoS4 alloy steel bar combines the high strength and deep hardening capability of chromium-molybdenum steel with enhanced machinability due to sulphur addition. It ensures consistent mechanical properties across large cross-sections and performs reliably under cyclic and heavy loads. Applications: • Heavy-duty shafts and axles • Gear shafts and transmission components • Crankshafts and connecting rods • High-strength bolts and studs • Oil and gas equipment parts • Construction and mining machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 42CrMoS4 alloy steel bars in a wide range of diameters and finishes. With superior strength, hardenability, and improved machinability, 42CrMoS4 steel bars are ideal for demanding automotive, mechanical, and heavy engineering applications. For stock details, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade developed for components requiring high strength, good hardenability, and improved machinability. With a nominal carbon content of approximately 0.34%, this grade offers a strong balance between strength and toughness, while the addition of sulphur (S) enhances machining performance compared to non-resulphurized grades such as 34CrMo4. Manufactured in accordance with EN 10083-3, 34CrMoS4 steel is suitable for quenching and tempering applications where both mechanical strength and efficient machining are required. Chromium improves hardenability and wear resistance, while molybdenum increases strength and resistance to tempering softening. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrMoS4 alloy steel bars, supplied with mill test certificates and strict quality assurance. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars Explanation of Designation (34CrMoS4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10 – 12% • Hardness: 260 – 320 HB (depending on section size and heat treatment) Key Features: • High strength Cr-Mo alloy steel • Improved machinability due to sulphur addition • Excellent hardenability for thick sections • Good fatigue and impact resistance • Suitable for heavily machined components Material Characteristics: EN 10083-3 34CrMoS4 alloy steel bar combines the strength and hardenability of chromium-molybdenum steel with enhanced machining performance. It provides uniform mechanical properties after quenching and tempering, making it ideal for precision-machined heavy-duty components. Applications: • Machined shafts and spindles • Automotive drivetrain components • Gear shafts • High-strength bolts and studs • Oil and gas mechanical parts • Heavy engineering machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrMoS4 alloy steel bars in a wide range of diameters and finishes. With high strength, reliable hardenability, and improved machinability, 34CrMoS4 is an excellent choice for demanding engineering and industrial applications. For stock availability, custom sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrMo4 is a chromium-molybdenum alloy steel grade designed for components requiring high strength, good toughness, and excellent hardenability after quenching and tempering. With a nominal carbon content of approximately 0.34%, this grade provides higher strength levels compared to 25CrMo4 while maintaining reliable impact resistance and fatigue performance. Manufactured in accordance with EN 10083-3, 34CrMo4 steel is widely used in engineering and heavy-duty mechanical applications. The presence of chromium improves hardenability and wear resistance, while molybdenum enhances strength and resistance to tempering softening, especially in thicker sections. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrMo4 alloy steel plates and bars, supplied with mill test certificates and strict quality inspection. Forms of Supply (as per grade): Hot rolled plates, Quenched and tempered plates, Normalized plates, Annealed plates, Flame cut plates, Cut-to-size plates, Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Square bars, Flat bars, Hex bars Explanation of Designation (34CrMo4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 11% • Hardness: 260 – 320 HB (depending on section size and heat treatment) Key Features: • High strength Cr-Mo alloy steel • Excellent hardenability for thick sections • Good impact strength and fatigue resistance • Reliable performance after quenching and tempering • Suitable for both plate fabrication and machined bar components Material Characteristics: EN 10083-3 34CrMo4 alloy steel offers a strong combination of mechanical strength and toughness. The chromium and molybdenum content ensures deep and uniform hardening, making it suitable for heavily stressed components in both plate and bar forms. It performs well under cyclic loading and dynamic stresses. Applications: • Pressure vessel and high-strength structural plates • Shafts and spindles • Automotive drivetrain components • Oil and gas equipment parts • Heavy machinery components • Bolts and high-strength fasteners Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrMo4 alloy steel plates and bars in a wide range of sizes and heat-treated conditions. With superior strength, toughness, and hardenability, 34CrMo4 is widely used in demanding engineering and industrial applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 25CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade designed for applications requiring good strength, reliable hardenability, and enhanced machinability. Due to the addition of sulphur (S), this grade offers improved machining performance, making it highly suitable for components that require extensive machining after processing in both plate and bar forms. With a nominal carbon content of approximately 0.25% and alloying elements such as chromium and molybdenum, 25CrMoS4 provides a balanced combination of strength, toughness, and wear resistance after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 25CrMoS4 alloy steel plates and bars, supplied with mill test certificates and strict quality assurance as per international standards. Forms of Supply (as per grade): Hot rolled plates Quenched and tempered plates Normalized plates Annealed plates Flame cut plates Cut-to-size plates Hot rolled round bars Black round bars Forged bars Bright bars Peeled bars Square bars Flat bars Hex bars Explanation of Designation (25CrMoS4): • 25 – Approx. 0.25% carbon content • Cr – Chromium for improved strength and hardenability • Mo – Molybdenum for enhanced hardenability and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.22 – 0.29 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: ≥ 12% • Hardness: 200 – 280 HB (depending on section size and heat treatment) Key Features: • Resulphurized Cr-Mo alloy steel with superior machinability • Good strength and toughness after heat treatment • Improved hardenability compared to carbon steels • Reliable fatigue resistance • Suitable for both plate fabrication and machined bar components Material Characteristics: EN 10083-3 25CrMoS4 alloy steel offers a strong combination of mechanical performance and machining efficiency. The chromium and molybdenum content enhances hardenability and strength, while sulphur addition improves chip formation during machining operations. It performs well in quenched and tempered conditions for structural and mechanical applications. Applications: • Machined shafts and transmission components • Structural and fabricated engineering parts • Automotive components • Industrial machinery parts • Heat-treated mechanical plates and bars Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 25CrMoS4 alloy steel plates and bars in a wide range of sizes and heat-treated conditions. With enhanced machinability, good strength, and dependable performance, 25CrMoS4 is an excellent choice for demanding engineering and industrial applications. For stock availability, custom sizes, or technical assistance, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 39MnCrB6-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high strength, superior hardenability, and excellent wear resistance after quenching and tempering. The addition of boron (B) in controlled amounts significantly increases hardenability, allowing deep and uniform hardening even in large diameter bars. With a nominal carbon content of approximately 0.39%, along with manganese and chromium as key alloying elements, 39MnCrB6-2 steel provides enhanced tensile strength and improved fatigue performance compared to lower carbon boron steels. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 39MnCrB6-2 alloy steel bars, supplied with certified mill test certificates and strict quality assurance. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (39MnCrB6-2): • 39 – Approx. 0.39% carbon content • Mn – Manganese for strength and improved hardenability • Cr – Chromium for enhanced wear resistance and depth of hardening • B – Boron for significantly increased hardenability • 6-2 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.42 • Manganese (Mn): 1.20 – 1.50 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.30 – 0.60 • Boron (B): 0.0008 – 0.0050 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 950 – 1150 MPa • Yield Strength: ≥ 750 MPa • Elongation: ≥ 9 – 11% • Hardness: 280 – 340 HB (depending on heat treatment and section size) Key Features: • High carbon boron-alloyed steel with superior hardenability • High strength and improved fatigue resistance • Uniform mechanical properties in thick sections • Good wear resistance after heat treatment • Suitable for heavily loaded mechanical components Material Characteristics: EN 10083-3 39MnCrB6-2 alloy steel bar offers enhanced hardenability due to boron addition, ensuring deep hardening capability and consistent strength throughout the cross section. The higher carbon content provides increased hardness and tensile strength, making it suitable for demanding engineering applications. Applications: • Heavy-duty shafts and axles • Automotive drivetrain and suspension components • Gears and transmission parts • Agricultural and construction machinery components • High-strength bolts and mechanical fasteners Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 39MnCrB6-2 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With high strength, superior hardenability, and reliable performance after heat treatment, 39MnCrB6-2 steel bars are an ideal choice for automotive and heavy engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 33MnCrB5-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high strength, excellent hardenability, and reliable toughness after quenching and tempering. The controlled addition of boron (B) significantly improves hardenability, enabling deep and uniform hardening even in medium to large cross-section bars. With a nominal carbon content of approximately 0.33%, along with manganese and chromium as the primary alloying elements, 33MnCrB5-2 steel offers a strong combination of strength, wear resistance, and fatigue performance. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 33MnCrB5-2 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (33MnCrB5-2): • 33 – Approx. 0.33% carbon content • Mn – Manganese for improved strength and hardenability • Cr – Chromium for enhanced wear resistance and deeper hardening • B – Boron for significantly increased hardenability • 5-2 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.36 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.30 – 0.60 • Boron (B): 0.0008 – 0.0050 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10 – 12% • Hardness: 260 – 330 HB (depending on heat treatment and section size) Key Features: • Boron-alloyed steel with superior hardenability • Higher strength due to increased carbon content • Uniform mechanical properties across larger sections • Good fatigue and wear resistance • Suitable for demanding heat-treated applications Material Characteristics: EN 10083-3 33MnCrB5-2 alloy steel bar provides enhanced hardenability through boron addition, ensuring deep hardening capability and consistent mechanical properties. It combines high strength with adequate toughness, making it suitable for dynamically loaded components. Applications: • Automotive suspension and drivetrain components • Shafts and axles • Gears and transmission parts • High-strength fasteners and bolts • Agricultural and heavy-duty machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 33MnCrB5-2 alloy steel bars in various sizes and finishes to meet industrial and automotive requirements. With high strength, enhanced hardenability, and reliable performance after heat treatment, 33MnCrB5-2 steel bars are an excellent choice for engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 41CrS4 is a resulphurized chromium alloy steel grade developed for applications requiring high strength, improved hardenability, and excellent machinability. The controlled addition of sulphur (S) enhances cutting performance and chip formation, making this grade particularly suitable for high-speed machining and large-scale production of precision components. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41CrS4 steel delivers higher strength and hardness compared to lower carbon chromium grades, while maintaining good toughness after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41CrS4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 9 – 11% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with superior machinability • Higher strength due to increased carbon content • Good hardenability and wear resistance • Suitable for quenching and tempering • Reliable performance in dynamic and torsional load conditions Material Characteristics: EN 10083-3 41CrS4 alloy steel bar combines high strength with improved machinability. The sulphur addition enhances tool life and cutting efficiency, while chromium improves hardenability and wear resistance. It is well-suited for precision machined components requiring strength and production efficiency. Applications: • High-strength machined shafts and spindles • Automotive transmission components • Gear blanks and drive parts • Bolts, studs, and fasteners • Mass-produced precision engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41CrS4 alloy steel bars in various sizes and finishes to meet demanding industrial and machining requirements. With enhanced machinability and strong mechanical properties, 41CrS4 steel bars are ideal for high-volume and precision engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrS4 is a resulphurized chromium alloy steel grade developed for applications requiring good strength, improved machinability, and reliable hardenability after heat treatment. The addition of sulphur (S) enhances machinability, making this grade particularly suitable for high-speed machining and mass production of components. With a nominal carbon content of approximately 0.34% and chromium as the primary alloying element, 34CrS4 steel provides a good balance of strength, toughness, and wear resistance after quenching and tempering. This material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (34CrS4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 (improved machinability range) • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 10% • Hardness: 230 – 300 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with enhanced machinability • Good strength and wear resistance after heat treatment • Improved cutting performance in automatic machining • Suitable for mass production components • Reliable hardenability compared to plain carbon steels Material Characteristics: EN 10083-3 34CrS4 alloy steel bar offers improved machinability due to sulphur addition while maintaining good mechanical strength and hardenability. It is ideal for components requiring precision machining along with adequate strength and wear resistance. Applications: • Machined shafts and spindles • Automotive components • Transmission and gear parts • Bolts, studs, and fasteners • High-volume precision machined parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrS4 alloy steel bars in various sizes and finishes to meet industrial machining requirements. With enhanced machinability and reliable mechanical properties, 34CrS4 steel bars are an excellent choice for high-speed machining and engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 41Cr4 is a chromium alloy steel grade designed for applications requiring high strength, good toughness, and improved hardenability after heat treatment. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41Cr4 steel delivers enhanced mechanical performance and wear resistance compared to lower carbon alloy steels. 41Cr4 alloy steel bars are widely used in components subjected to high torsional stress, bending loads, and dynamic forces. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality assurance to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41Cr4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength, hardenability, and wear resistance • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with higher carbon content for improved strength • Good hardenability and wear resistance • Suitable for quenching and tempering • Good fatigue resistance under dynamic loading • Reliable mechanical performance in heat-treated condition Material Characteristics: EN 10083-3 41Cr4 alloy steel bar provides a strong combination of strength, toughness, and abrasion resistance. The higher carbon content allows for greater hardness after heat treatment, while chromium enhances depth of hardening and wear resistance. Applications: • Shafts, spindles, and axles • Gears and pinions • High-strength bolts and fasteners • Automotive transmission components • Heat-treated engineering parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41Cr4 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With high strength, good hardenability, and reliable wear resistance, 41Cr4 steel bars are suitable for a wide range of industrial and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 37Cr4 is a chromium alloy steel grade designed for applications requiring good strength, enhanced hardenability, and reliable wear resistance after heat treatment. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37Cr4 steel provides improved mechanical properties compared to non-alloy carbon steels. 37Cr4 alloy steel bars are widely used in engineering components subjected to torsion, bending, and moderate to high dynamic loads. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (37Cr4): • 37 – Approx. 0.37% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.34 – 0.41 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 11% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and toughness • Improved hardenability over plain carbon steels • Good wear and fatigue resistance • Suitable for quenching and tempering applications • Reliable performance under dynamic loading Material Characteristics: EN 10083-3 37Cr4 alloy steel bar offers a strong balance between strength and toughness. The chromium addition enhances hardenability, allowing uniform mechanical properties in medium-sized sections after heat treatment. It is suitable for components that require both surface hardness and core toughness. Applications: • Shafts and axles • Gears and transmission components • Automotive and machinery parts • Bolts, studs, and fasteners • General engineering and heat-treated mechanical components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 37Cr4 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With reliable strength, good wear resistance, and excellent heat treatment response, 37Cr4 steel bars are suitable for a wide range of engineering and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34Cr4 is a chromium alloy steel grade developed for applications requiring good strength, improved hardenability, and enhanced wear resistance after heat treatment. With a nominal carbon content of approximately 0.34% and chromium as the principal alloying element, 34Cr4 steel offers a reliable balance of toughness and mechanical strength. 34Cr4 alloy steel plates are widely used in structural and mechanical components subjected to moderate to high stress conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34Cr4 alloy steel plates, supplied with certified chemical composition and controlled mechanical properties as per EN standards. Forms of Supply (as per grade): Hot rolled plates, normalized plates, annealed plates, quenched and tempered plates, flame cut plates, cut-to-size plates Explanation of Designation (34Cr4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 12% • Hardness: 230 – 300 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and toughness • Improved hardenability compared to carbon steels • Good wear and fatigue resistance • Suitable for quenching and tempering • Reliable mechanical performance in structural applications Material Characteristics: EN 10083-3 34Cr4 alloy steel plate provides a dependable combination of strength, toughness, and wear resistance. The chromium content enhances hardenability and allows the material to achieve improved mechanical properties after heat treatment, making it suitable for load-bearing components. Applications: • Structural and fabricated engineering parts • Shafts and mechanical components • Automotive and heavy machinery parts • Heat-treated plates for high-strength applications • General engineering and industrial uses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 34Cr4 alloy steel plates in various thicknesses and heat-treated conditions. With good strength, enhanced hardenability, and reliable performance, 34Cr4 steel plates are suitable for a wide range of engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 46Cr2 is a chromium alloy steel grade developed for applications requiring high strength, improved wear resistance, and good hardenability after heat treatment. With a nominal carbon content of approximately 0.46%, this grade provides higher strength and hardness compared to lower carbon chromium steels. The addition of chromium enhances hardenability, surface hardness, and resistance to abrasion. 46Cr2 alloy steel bars are widely used in components subjected to high mechanical loads, torsion, and wear conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 46Cr2 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (46Cr2): • 46 – Approx. 0.46% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 2 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.43 – 0.50 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.40 – 0.70 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 10% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Higher carbon chromium steel with improved hardness • Good hardenability and wear resistance • Suitable for surface hardening applications • Good fatigue resistance under dynamic loading • Reliable performance in heat-treated condition Material Characteristics: EN 10083-3 46Cr2 alloy steel bars offer a strong combination of strength and abrasion resistance. The higher carbon content allows the material to achieve greater hardness after heat treatment, while chromium enhances hardenability and durability. Applications: • Shafts and axles • Gears and pinions • High-strength mechanical components • Automotive transmission parts • Wear-resistant engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 46Cr2 alloy steel bars in various sizes and finishes to meet industrial and engineering requirements. With high strength, good wear resistance, and reliable heat treatment response, 46Cr2 steel bars are suitable for demanding mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30NiCrMo16-6 is a high-strength nickel-chromium-molybdenum alloy steel grade developed for applications requiring exceptional toughness, very high hardenability, and superior fatigue resistance after quenching and tempering. With a nominal carbon content of approximately 0.30% and higher nickel content compared to standard Cr-Ni-Mo grades, this steel offers outstanding impact strength and uniform mechanical properties even in heavy sections. 30NiCrMo16-6 is widely used in critical engineering, defense, heavy machinery, and power transmission components where reliability under extreme loading conditions is essential. The material is produced in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 30NiCrMo16-6 alloy steel plates and bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, flame cut plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (30NiCrMo16-6): • 30 – Approx. 0.30% carbon content • Ni – Nickel for superior toughness and impact resistance • Cr – Chromium for strength and hardenability • Mo – Molybdenum for improved fatigue resistance and tempering stability • 16-6 – Indicates alloying content range as per EN standard (higher nickel content category) Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.34 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 3.50 – 4.00 • Chromium (Cr): 1.30 – 1.70 • Molybdenum (Mo): 0.30 – 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1200 MPa (depending on section size and heat treatment) • Yield Strength: ≥ 850 MPa • Elongation: ≥ 11% • Hardness: 300 – 360 HB • Excellent impact strength even at low temperatures Key Features: • High Ni-Cr-Mo alloy steel with exceptional toughness • Excellent hardenability for thick plates and large diameter bars • Superior fatigue and impact resistance • Good resistance to temper brittleness • Suitable for highly stressed and safety-critical components Material Characteristics: EN 10083-3 30NiCrMo16-6 alloy steel in plate and bar form provides outstanding mechanical performance in heavy sections due to its high nickel content. It ensures deep hardening capability and uniform strength distribution after heat treatment, making it ideal for critical load-bearing applications. Applications: • Heavy-duty shafts and axles • High-strength gears and transmission components • Defense and aerospace structural parts • Large forged components • Power generation and heavy machinery equipment Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 30NiCrMo16-6 alloy steel plates and bars in various sizes, finishes, and heat-treated conditions. With its exceptional toughness, high strength, and superior hardenability, this grade is a reliable choice for demanding industrial and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrNiMo6 is a high-strength chromium-nickel-molybdenum alloy steel grade designed for components subjected to heavy dynamic loads and high stress conditions. With a nominal carbon content of approximately 0.34% and alloying additions of chromium, nickel, and molybdenum, this grade offers excellent hardenability, superior toughness, and outstanding fatigue resistance after quenching and tempering. EN 10083-3 34CrNiMo6 alloy steel bars are widely used in automotive, heavy engineering, oil & gas, and power transmission applications. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrNiMo6 alloy steel bars, supplied with certified chemical composition and controlled mechanical properties to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (34CrNiMo6): • 34 – Approx. 0.34% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for improved toughness and impact strength • Mo – Molybdenum for enhanced hardenability, fatigue strength, and resistance to tempering softening • 6 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.38 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.30 – 1.70 • Nickel (Ni): 1.30 – 1.70 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa (can reach higher depending on section size and heat treatment) • Yield Strength: ≥ 750 MPa • Elongation: ≥ 12% • Impact Strength: Excellent toughness even at low temperatures • Hardness: 280 – 320 HB (after heat treatment) Key Features: • High-strength Cr-Ni-Mo alloy steel • Excellent hardenability for large diameter bars • Superior fatigue and impact resistance • Very good machinability in normalized or annealed condition • Reliable performance in heavy-duty and safety-critical components Material Characteristics: EN 10083-3 34CrNiMo6 alloy steel bar combines high strength with excellent toughness and fatigue resistance. Due to its strong hardenability, it maintains uniform mechanical properties across large cross sections. The presence of molybdenum improves resistance to temper brittleness and enhances high-temperature strength. Applications: • Crankshafts and camshafts • Heavy-duty shafts and axles • Gears, pinions, and couplings • Oil & gas components • Bolts, studs, and high-strength fasteners • Forged and machined mechanical parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrNiMo6 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With its excellent strength, toughness, and fatigue resistance, 34CrNiMo6 is an ideal choice for critical mechanical and structural applications. For size availability, technical data, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 35NiCr6 is a nickel-chromium alloy steel grade designed for applications requiring very high strength, excellent toughness, and good hardenability after heat treatment. With a nominal carbon content of around 0.35% and alloying elements such as nickel and chromium, 35NiCr6 steel offers superior mechanical performance, fatigue strength, and impact resistance compared to plain carbon steels. Supplied in plate and bar form, EN 10083-3 35NiCr6 alloy steel is widely used in heavy engineering, automotive, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 35NiCr6 alloy steel plates and bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (35NiCr6): • 35 – Approx. 0.35% carbon content • Ni – Nickel for improved toughness and impact strength • Cr – Chromium for increased strength, wear resistance, and hardenability • 6 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.38 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.30 – 1.70 • Chromium (Cr): 0.60 – 0.90 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 11% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Nickel-chromium alloy steel with excellent toughness • High strength and fatigue resistance after quenching and tempering • Good hardenability for thick plates and large bar sections • Excellent impact resistance at low temperatures • Suitable for heavily loaded and dynamically stressed components Material Characteristics: EN 10083-3 35NiCr6 alloy steel in plate and bar form provides an outstanding combination of strength, toughness, and hardenability due to its nickel and chromium content. It responds very well to heat treatment, achieving high and uniform mechanical properties even in thicker sections, making it ideal for critical load-bearing and fatigue-resistant applications. Applications: • Heavy-duty machine components • Gears, shafts, and drive components • Power transmission plates and bars • Automotive and defense components • Heavy engineering and industrial equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 35NiCr6 alloy steel plates and bars in various heat-treated and cut-to-size conditions with consistent quality and reliable performance. With excellent toughness, high strength, and superior hardenability, 35NiCr6 steel is a dependable choice for demanding engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30MnB5 is a boron-alloyed steel grade developed for applications requiring high strength, excellent hardenability, and good toughness after heat treatment. With a nominal carbon content of around 0.30% and the controlled addition of boron and manganese, 30MnB5 steel provides significantly improved hardenability compared to conventional carbon steels, allowing uniform mechanical properties even in thicker sections. Supplied in bar form, EN 10083-3 30MnB5 alloy steel is widely used in automotive, forging, and heavy engineering applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 30MnB5 alloy steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar, hot rolled plates, quenched and tempered plates Explanation of Designation (30MnB5): • 30 – Approx. 0.30% carbon content • Mn – Manganese alloying element for strength and hardenability • B – Boron addition for enhanced hardenability • 5 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.27 – 0.33 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Boron (B): 0.0008 – 0.0050 • Chromium (Cr): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 11% • Hardness: 250 – 320 HB (after heat treatment) Key Features: • Boron alloy steel with excellent hardenability • High strength and good toughness after quenching and tempering • Uniform mechanical properties in bars and plates • Suitable for hot forging and press hardening applications • Cost-effective alternative to higher alloy steels Material Characteristics: EN 10083-3 30MnB5 alloy steel in bar and plate form offers a strong combination of strength, toughness, and hardenability due to controlled boron addition and manganese content. It responds very well to heat treatment, achieving high and uniform hardness even in thicker sections, making it suitable for safety-critical and heavily loaded components. Applications: • Automotive structural and safety components • Forged and press-hardened parts • Shafts, axles, and suspension components • High-strength plates for fabricated assemblies • Heavy engineering and industrial machinery parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 30MnB5 alloy steel bars and plates in relevant industrial forms with consistent quality and reliable performance. With excellent hardenability, high strength after heat treatment, and proven performance in automotive and forging applications, 30MnB5 alloy steel is a dependable choice for demanding engineering requirements. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

SA 387 Grade 91 is a high-strength chromium-molybdenum-vanadium alloy steel developed for high-temperature and high-pressure service. Supplied in plate and sheet form (sheet cut from plate), this grade is widely used in advanced power generation, petrochemical, and refinery applications where superior creep resistance, elevated temperature strength, and long-term microstructural stability are essential. The addition of vanadium and niobium (columbium) provides exceptional resistance to creep and thermal fatigue under prolonged service conditions. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 387 Grade 91 alloy steel plates and sheets. Our materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, excellent mechanical performance, and full compliance with ASME SA 387 / ASTM A387 standards for critical pressure equipment. Forms Available: plate, sheet (cut from plate) Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22, Grade 91 Chemical Composition (% – SA 387 Grade 91): • Carbon (C): 0.08 – 0.12 • Chromium (Cr): 8.00 – 9.50 • Molybdenum (Mo): 0.85 – 1.05 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): 0.20 – 0.50 • Vanadium (V): 0.18 – 0.25 • Niobium (Nb): 0.06 – 0.10 • Nitrogen (N): 0.03 – 0.07 • Phosphorus (P): ≤ 0.020 • Sulphur (S): ≤ 0.010 Mechanical Properties (SA 387 Grade 91 – typical, vary by thickness): • Tensile Strength: 585 – 760 MPa • Yield Strength: minimum 415 MPa • Elongation: minimum 18% Key Features: • Outstanding creep resistance at elevated temperatures • Excellent strength retention up to approximately 600°C • Superior resistance to thermal fatigue and oxidation • High-pressure capability for critical service environments • Requires controlled welding procedures with mandatory PWHT • Long service life in severe operating conditions Material Characteristics: SA 387 Grade 91 alloy steel is a modified 9Cr-1Mo steel strengthened with vanadium and niobium for improved creep rupture strength and microstructural stability. It is specifically designed for long-term exposure to high temperature and pressure, making it a preferred material for next-generation power plants and critical refinery equipment. Applications: • High-temperature pressure vessels • Boilers and superheater components • Heat recovery steam generators (HRSG) • Power plant headers and piping components • Refinery and petrochemical reactors • Oil & gas high-pressure processing units Conclusion: Ladhani Metal Corporation supplies premium-quality SA 387 Grade 91 alloy steel plates and sheets for the most demanding high-temperature and high-pressure applications. With superior chemical stability, exceptional mechanical performance, and compliance with international standards, SA 387 Grade 91 is the material of choice for critical service environments. For customized sizes, technical consultation, or grade comparison, contact Ladhani Metal Corporation. #SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

SA 387 Grade 22 is a chromium-molybdenum alloy steel grade developed for high-temperature and high-pressure service conditions. Supplied in plate and sheet form (sheet cut from plate), this material is extensively used in pressure vessels, boilers, and heat exchangers operating in elevated temperature environments. The 2.25% chromium and 1.0% molybdenum content provides excellent creep resistance, oxidation resistance, and long-term strength stability. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SA 387 Grade 22 alloy steel plates and sheets. All materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME SA 387 / ASTM A387 standards for pressure equipment. Forms Available: plate, sheet (cut from plate) Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22 Chemical Composition (% – SA 387 Grade 22): • Carbon (C): 0.05 – 0.15 • Chromium (Cr): 2.00 – 2.50 • Molybdenum (Mo): 0.90 – 1.10 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): up to 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (SA 387 Grade 22 – typical, vary by thickness): • Tensile Strength: 415 – 585 MPa • Yield Strength: minimum 205 MPa • Elongation: minimum 18% Key Features: • Excellent strength retention at elevated temperatures • Superior creep resistance for long-term service • Good resistance to oxidation and hydrogen attack • Designed for high-pressure and high-temperature environments • Good weldability with controlled preheating and post-weld heat treatment • High structural stability and toughness Material Characteristics: SA 387 Grade 22 alloy steel is engineered for prolonged service under high temperature and pressure. The chromium content enhances oxidation and corrosion resistance, while molybdenum improves tensile strength and creep resistance. This grade offers a stable microstructure, making it suitable for critical pressure-retaining components. Applications: • Pressure vessels and boilers • Heat exchangers and condensers • Refinery and petrochemical equipment • Power plant components • Reactors, separators, and drums • Oil & gas and chemical processing units Conclusion: Ladhani Metal Corporation supplies high-quality SA 387 Grade 22 alloy steel plates and sheets for demanding industrial applications. With excellent chemical stability, reliable mechanical performance, and compliance with international standards, SA 387 Grade 22 remains a preferred material for high-temperature and high-pressure service. For customized sizes, technical assistance, or grade selection, contact Ladhani Metal Corporation. #SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

SA 387 Grade 11 is a chromium-molybdenum alloy steel grade developed for pressure vessels and equipment operating at elevated temperatures. Supplied in plate and sheet form (sheet cut from plate), SA 387 Grade 11 alloy steel provides excellent high-temperature strength, good oxidation resistance, and improved creep resistance, making it suitable for severe service conditions in power plants, refineries, and petrochemical industries. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 387 alloy steel plates and sheets, including SA 387 Grade 11. Our materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for pressure vessel and high-temperature applications. Forms Available: plate, sheet (cut from plate) Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22 Chemical Composition (% – as per SA 387 Grade 11 specification): • Carbon (C): 0.05 – 0.15 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): 0.50 max • Chromium (Cr): 1.00 – 1.50 • Molybdenum (Mo): 0.45 – 0.65 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: approx. 415 – 585 MPa • Yield Strength: approx. 205 MPa • Elongation: approx. 20 – 24% Key Features: • Excellent strength and stability at elevated temperatures • Improved oxidation and corrosion resistance • Enhanced creep resistance for long-term service • Good weldability with proper preheating and PWHT • Reliable mechanical performance under pressure • Suitable for high-temperature and high-pressure environments Material Characteristics: SA 387 Grade 11 alloy steel contains higher chromium content compared to Grade 5, providing better oxidation resistance and thermal stability at elevated temperatures. The addition of molybdenum improves creep resistance and high-temperature strength, making this grade ideal for critical pressure-containing components. Applications: • Pressure vessels and boilers • Heat exchangers and condensers • Refinery and petrochemical equipment • Power plant components • Reactors, drums, and separators • Oil & gas and process industry units Conclusion: Ladhani Metal Corporation supplies premium-quality SA 387 Grade 11 alloy steel plates and sheets for demanding high-temperature and pressure service applications. With verified chemical composition, dependable mechanical properties, and strict compliance with international standards, SA 387 Grade 11 remains a preferred material for critical industrial equipment. For customized sizes, grade comparison, or technical assistance, contact Ladhani Metal Corporation. #SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

SA 387 Grade 5 is a chromium-molybdenum alloy steel grade designed for high-temperature and pressure service applications. Supplied in plate and sheet form (sheet cut from plate), SA 387 Grade 5 alloy steel is widely used in pressure vessels, boilers, and heat exchangers where reliable strength, good oxidation resistance, and stable performance at elevated temperatures are required. Its balanced chemical composition provides improved mechanical properties compared to carbon steels, making it suitable for demanding industrial environments. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SA 387 alloy steel plates and sheets, including SA 387 Grade 5. Our materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for pressure vessel and high-temperature applications. Forms Available: plate, sheet (cut from plate) Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22 Chemical Composition (% – as per SA 387 Grade 5 specification): • Carbon (C): 0.05 – 0.15 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): 0.50 max • Chromium (Cr): 0.50 – 1.00 • Molybdenum (Mo): 0.45 – 0.65 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: approx. 415 – 585 MPa • Yield Strength: approx. 205 MPa • Elongation: approx. 22 – 25% Key Features: • Good strength retention at elevated temperatures • Resistance to oxidation and hydrogen-induced damage • Good weldability with proper preheating and PWHT • Improved creep resistance over carbon steels • Stable mechanical properties under pressure service • Suitable for moderate to high-temperature environments Material Characteristics: SA 387 Grade 5 alloy steel combines chromium and molybdenum to enhance high-temperature strength, oxidation resistance, and long-term service stability. This grade is commonly selected for pressure-containing components operating at moderate to high temperatures, where dependable performance and compliance with pressure vessel codes are essential. Applications: • Pressure vessels and boilers • Heat exchangers and condensers • Refinery and petrochemical equipment • Power plant components • Reactors, separators, and drums • Oil & gas processing systems Conclusion: Ladhani Metal Corporation supplies premium-quality SA 387 Grade 5 alloy steel plates and sheets for high-temperature and pressure service applications. With reliable mechanical performance, excellent thermal stability, and adherence to international standards, SA 387 Grade 5 remains a practical and economical choice for demanding industrial requirements. For customized sizes, grade comparison, or technical assistance, contact Ladhani Metal Corporation. #SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

SA 387 is a chromium-molybdenum alloy steel specification primarily intended for high-temperature and pressure service applications. Supplied in plate and sheet form (sheet cut from plate), SA 387 alloy steel is widely used in pressure vessels, boilers, and heat exchangers where elevated temperature strength, oxidation resistance, and creep resistance are critical. The addition of chromium and molybdenum enhances mechanical strength, corrosion resistance, and long-term stability under severe operating conditions. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 387 alloy steel plates and sheets. Our SA 387 materials are sourced from approved mills and supplied in normalized and tempered condition, ensuring consistent quality, excellent mechanical performance, and full compliance with ASME / ASTM standards for pressure equipment and high-temperature applications. Forms Available: plate, sheet (cut from plate) Grades Available: SA 387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22 Chemical Composition (% – typical limits, vary by grade): • Carbon (C): up to 0.15 • Chromium (Cr): 1.00 – 2.25 • Molybdenum (Mo): 0.45 – 1.00 • Manganese (Mn): up to 0.60 • Silicon (Si): up to 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, vary by grade and thickness): • Tensile Strength: approx. 415 – 690 MPa • Yield Strength: approx. 205 – 415 MPa • Elongation: approx. 18 – 25% Key Features: • Excellent strength at elevated temperatures • Good resistance to oxidation and hydrogen attack • Improved creep resistance for long-term service • Good weldability with controlled preheat and post-weld heat treatment • High toughness and structural stability • Suitable for high-pressure and high-temperature environments Material Characteristics: SA 387 alloy steel is engineered for applications involving sustained exposure to high temperatures and pressures. The chromium content improves oxidation and corrosion resistance, while molybdenum enhances strength and creep resistance. Different grades within the SA 387 specification allow flexibility in material selection based on operating temperature, pressure, and service conditions. Applications: • Pressure vessels and boilers • Heat exchangers and condensers • Refinery and petrochemical equipment • Power plant components • Reactors and separators • Oil & gas processing units Conclusion: Ladhani Metal Corporation supplies high-quality SA 387 alloy steel plates and sheets for critical high-temperature and pressure applications. With excellent mechanical strength, superior thermal stability, and compliance with international standards, SA 387 alloy steel remains a preferred choice for demanding industrial environments. For grade selection, customized dimensions, or technical assistance, contact Ladhani Metal Corporation. #SA387 #SA387AlloySteel #ASTMA387 #ChromiumMolybdenumSteel #CrMoSteel #AlloySteelPlate #AlloySteelSheet #PressureVesselSteel #BoilerSteel #HighTemperatureSteel #HighPressureSteel #HeatResistantSteel #RefinerySteel #PetrochemicalSteel #PowerPlantSteel #OilAndGasSteel #ThermalPlantSteel #ReactorSteel #HeatExchangerSteel #HeavyEngineeringSteel #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableAlloySteel #SteelPlates #SteelSheets #AlloySteelProducts #SteelForRefineries #SteelForBoilers #SteelForPressureVessels #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #AlloySteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialFabrication #PowerGenerationSteel #EnergySectorSteel #ASTMSteel #ASMESteel #AlloySteel Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

SA 283 Grade C is a low to intermediate tensile strength carbon steel grade widely used for structural-quality applications that require higher strength than Grades A and B while maintaining good ductility and weldability. Supplied in plate and sheet form (sheet cut from plate), SA 283 Grade C is commonly selected for general fabrication and construction where reliable mechanical performance is required under normal atmospheric conditions. It offers uniform strength, ease of forming, and dependable service life, making it one of the most popular grades in the SA 283 specification. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets, including SA 283 Grade C. Our materials are sourced from approved mills and supplied in as-rolled or normalized condition, ensuring consistent quality, dimensional accuracy, and full compliance with ASME / ASTM standards for structural and pressure-related applications. Forms Available: plate, sheet (cut from plate) Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D Chemical Composition (% – typical limits, vary by grade): • Carbon (C): up to 0.28 • Manganese (Mn): up to 0.90 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.040 • Silicon (Si): ≤ 0.40 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: approx. 415 – 550 MPa • Yield Strength: approx. 205 MPa • Elongation: approx. 20 – 24% Key Features: • Excellent weldability using standard welding processes • Higher strength compared to Grades A and B • Good formability for rolling, bending, and fabrication • Uniform mechanical properties across thickness ranges • Cost-effective alternative to higher alloy structural steels • Suitable for low to moderate stress applications Material Characteristics: SA 283 Grade C carbon steel offers a well-balanced combination of strength and ductility, making it ideal for structural components that require improved load-bearing capacity without sacrificing ease of fabrication. This grade is the most commonly used within the SA 283 series due to its versatility and consistent performance in general engineering applications. Applications: • General structural fabrication • Storage tanks and non-critical pressure vessels • Industrial buildings and heavy-duty supports • Bridges and civil engineering structures • Frames, base plates, and fabricated components • Oil & gas and power plant auxiliary structures Conclusion: Ladhani Metal Corporation supplies premium-quality SA 283 Grade C carbon steel plates and sheets for a wide range of structural and fabrication applications. With dependable mechanical properties, excellent weldability, and compliance with international standards, SA 283 Grade C remains a practical and economical choice for general engineering requirements. For sizing, grade comparison, or technical assistance, contact Ladhani Metal Corporation. #SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

SA 283 is a low and intermediate tensile strength carbon steel specification intended for structural-quality plates used in general fabrication and construction. It offers good weldability, formability, and uniform mechanical properties, making it suitable for applications where moderate strength and reliable performance are required under normal atmospheric conditions. SA 283 is commonly supplied in Grades A, B, C, and D, with increasing strength levels across the grades. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SA 283 carbon steel plates and sheets. Our SA 283 materials are sourced from approved mills and supplied in as-rolled or normalized condition, ensuring consistent quality, dimensional accuracy, and compliance with ASME / ASTM standards for structural and pressure-related applications. Forms Available: plate, sheet (cut from plate) Grades Available: SA 283 Grade A, Grade B, Grade C, Grade D Chemical Composition (% – typical limits, vary by grade): • Carbon (C): up to 0.23 – 0.28 • Manganese (Mn): up to 0.90 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.040 • Silicon (Si): ≤ 0.40 Mechanical Properties (Typical, vary by grade and thickness): • Tensile Strength: 310 – 550 MPa • Yield Strength: 165 – 230 MPa • Elongation: 20 – 27% Key Features: • Good weldability without complex preheating • Excellent formability for bending and fabrication • Uniform strength and ductility across thickness ranges • Cost-effective solution for structural applications • Suitable for low to moderate stress environments • Easy machinability and fabrication Material Characteristics: SA 283 carbon steel is designed for structural-quality applications where high alloying or extreme mechanical performance is not required. The steel exhibits a fine balance of strength and ductility, allowing it to be easily cut, welded, and formed. Grades A through D provide flexibility in selection depending on required strength levels, with Grade C being the most widely used for general structural work. Applications: • General structural fabrication • Storage tanks and non-critical pressure vessels • Industrial buildings and supports • Bridges and civil engineering structures • Base plates, frames, and fabricated components • Oil & gas and power plant auxiliary structures Conclusion: Ladhani Metal Corporation supplies high-quality SA 283 carbon steel plates and sheets suitable for a wide range of structural and fabrication applications. With dependable mechanical performance, ease of fabrication, and compliance with international standards, SA 283 remains a practical and economical choice for general engineering needs. For grade selection, customized sizes, or technical assistance, contact Ladhani Metal Corporation. #SA283 #SA283CarbonSteel #ASTMA283 #CarbonSteelPlate #CarbonSteelSheet #MildSteelPlate #StructuralSteel #BoilerSteel #PressureVesselSteel #LowCarbonSteel #SteelPlates #SteelSheets #IndustrialSteel #EngineeringSteel #FabricationSteel #WeldableSteel #SteelForConstruction #SteelForFabrication #SteelForBoilers #HeatExchangerSteel #ShipbuildingSteel #TankFabrication #SteelForStorageTanks #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #CarbonSteelSupplier #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #HeavyEngineering #IndustrialMaterials #StructuralPlates #CarbonSteelProducts #SteelStockist #SteelTrading #SteelBusiness #SteelApplications #IndustrialFabrication #SteelEngineering #ASTMSteel #ASMESteel #CarbonSteelIndustry #SteelSolutions #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai

DIN 2627 Titanium Flanges PN 400 are high-integrity blind flanges manufactured from corrosion-resistant titanium alloys, engineered for extreme pressure applications. These flanges conform to the DIN 2627 standard and are specifically designed to close the end of a piping system, providing a reliable, leak-tight seal. With a pressure rating of PN 400 (400 bar / 5800 psi), these titanium blind flanges are ideal for high-pressure systems operating in chemically aggressive or high-temperature environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, offering top-quality components that comply with stringent international specifications. The DIN 2627 PN 400 titanium flanges are especially suited for high-demand sectors where superior material performance is essential under extreme mechanical and corrosive conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for ultra-high-pressure systems requiring secure isolation and sealing. These flanges ensure operational safety and long-term durability in critical gas, fluid, or chemical applications. Flange Type: • Blind Flanges These solid disk flanges are used to terminate the flow in a pipeline or vessel and can be easily removed for inspection or system modification. They are essential in high-pressure systems for ensuring tight sealing without any flow path. • Flat Face (FF) Flanges Utilized with full-face gaskets and flat mating surfaces, flat face blind flanges distribute bolt load evenly to prevent flange deformation, particularly when paired with brittle or non-metallic components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Trace Elements: Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H) Applications: Grade 2 titanium offers excellent corrosion resistance, good ductility, and weldability, making it suitable for high-pressure chemical processing, marine systems, and water treatment environments. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium delivers superior tensile strength and resistance to fatigue, high temperatures, and corrosion. It is the preferred material for aerospace, defense, offshore drilling, and pressurized chemical applications requiring durability under extreme conditions. Applications of DIN 2627 Titanium Flanges PN 400: • High-Pressure Chemical and Petrochemical Systems Used to terminate pipelines in systems transporting reactive or corrosive chemicals under high pressure. • Offshore Oil and Gas Platforms Ideal for sealing high-pressure flowlines and isolation points exposed to seawater and mechanical stress. • Aerospace Hydraulic and Fuel Systems Applied in high-performance systems requiring lightweight, pressure-resistant sealing. • Marine Engineering and Subsea Installations Deployed in subsea structures and marine piping where both high pressure and chloride-induced corrosion are concerns. • Nuclear and Power Generation Suited for extreme environments involving radioactive, corrosive, or high-temperature media. • Industrial Process Systems Used in closed-loop systems, autoclaves, reactors, and high-pressure vessels. Key Features: • Manufactured according to DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure environments • Exceptional corrosion resistance in seawater and chemical exposure • Titanium Grade 2 and Grade 5 options for specific strength and application needs • Blind flange design for secure system termination • Flat face flanges ensure optimal gasket compatibility and load balance • High strength-to-weight ratio and long service life • Suitable for offshore, aerospace, chemical, and power industries • Custom configurations, sizes, and finishes available upon request Conclusion: DIN 2627 Titanium Flanges PN 400 by Ladhani Metal Corporation are engineered to meet the highest standards of performance in ultra-high-pressure systems. Whether in offshore drilling, aerospace, or advanced chemical processes, these flanges offer unmatched reliability, corrosion resistance, and structural integrity. Contact Ladhani Metal Corporation for technical guidance, material selection, or customized solutions for your specific project needs.

DIN 2569 Titanium Flanges PN 100 are precision-engineered welding neck flanges manufactured from premium-grade titanium, designed for exceptional performance in high-pressure and corrosive industrial applications. Built to DIN 2569 standards, these flanges offer outstanding corrosion resistance, high strength-to-weight ratio, and excellent thermal stability, making them suitable for critical systems across industries such as chemical processing, offshore engineering, aerospace, pharmaceuticals, marine, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of titanium flanges, delivering high-quality products that comply with rigorous international standards. The welding neck design ensures secure, leak-proof connections, ideal for high-stress environments and systems requiring permanent joints that withstand both pressure and temperature extremes. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring superior corrosion resistance, structural reliability, and long-term sealing performance in aggressive environments. Flange Types: • Welding Neck Flanges Ensure high-strength, welded connections ideal for systems with continuous pressure and thermal cycling. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Welding Neck Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and titanium grades tailored to customer requirements. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Widely used in chemical processing, desalination plants, and marine environments due to its excellent corrosion resistance and formability. 2. Grade 5 (Ti-6Al-4V, Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Ideal for aerospace, offshore, and high-performance applications due to its high strength, low density, and corrosion resistance. Applications of DIN 2569 Titanium Flanges: • Chemical and Petrochemical Plants: Used in highly corrosive processes involving acids, chlorides, and oxidizing agents. • Marine and Offshore Engineering: Ideal for submerged and saltwater applications due to excellent resistance to seawater corrosion. • Aerospace and Defense: Employed in lightweight, high-strength components that require resistance to fatigue and corrosion. • Pharmaceutical and Medical Equipment: Used in ultra-clean and biocompatible systems where corrosion and contamination must be minimized. • Power Generation and Desalination: Applied in condenser systems, heat exchangers, and evaporators handling brine and other corrosive fluids. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Exceptional corrosion resistance, including seawater and chemical environments • Lightweight, high-strength construction for improved efficiency and durability • Strong welded neck design for secure, permanent pipe connections • Supplied with test certificates, quality documents, and full traceability • Compatible with custom surface treatments including pickling, polishing, and passivation Conclusion: DIN 2569 Titanium Flanges PN 100 from Ladhani Metal Corporation are engineered for the highest levels of corrosion resistance, strength, and performance under pressure. Designed for extreme environments and demanding applications, these titanium flanges offer reliable, long-lasting service and are available in customized sizes and titanium grades. For project-specific requirements, technical support, or detailed specifications, contact Ladhani Metal Corporation today.

DIN 2568 Titanium Flanges PN 64 are precision-engineered threaded flanges manufactured from high-performance titanium alloys, designed to meet the rigorous demands of high-pressure and highly corrosive industrial environments. Built to DIN 2568 specifications, these flanges deliver exceptional corrosion resistance, high strength-to-weight ratio, and thermal stability, making them ideal for use in specialized sectors such as chemical processing, marine systems, aerospace, medical, and desalination plants. Ladhani Metal Corporation is a trusted manufacturer and exporter of titanium flanges, offering products that conform to international quality and dimensional standards. The threaded design supports easy, weld-free installation and disassembly, particularly beneficial in applications requiring frequent maintenance or rapid assembly in corrosive settings. Pressure Rating: • PN 64 (64 bar / 928 psi): Specifically engineered for high-pressure applications in harsh environments where both mechanical reliability and corrosion resistance are critical. Flange Types: • Threaded (Screwed) Flanges Facilitates easy assembly and removal, suitable for systems under routine inspection or component replacement. • Raised Face (RF) Flanges Improves gasket performance and leak-proof sealing in high-pressure and high-temperature applications. • Flat Face (FF) Flanges Ideal for use with equipment made from brittle or non-metallic materials to ensure even load distribution. • Forged Threaded Flanges Offers superior strength, precise tolerances, and excellent fatigue resistance. • Custom-Machined Flanges Available in multiple sizes, titanium grades, and configurations to meet project-specific requirements. Available Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Widely used in chemical processing, desalination, and medical systems due to excellent corrosion resistance, formability, and weldability. 2. Grade 5 (Ti-6Al-4V, Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, marine, and high-performance engineering applications due to its high strength, lightweight nature, and resistance to fatigue and cracking. Applications of DIN 2568 Titanium Flanges: • Chemical and Petrochemical Plants: Used in aggressive chemical environments including acid production and chlor-alkali plants. • Marine and Offshore Engineering: Ideal for seawater exposure, underwater pipelines, and offshore installations. • Aerospace and Defense: Applied in fuel systems, hydraulics, and high-stress structural components. • Medical and Pharmaceutical Industry: Suitable for biocompatible and sterile processing systems. • Water Treatment and Desalination Plants: Used in brine handling systems and long-service, corrosion-prone environments. Key Features: • Manufactured to DIN 2568 standard • Available in PN 64 pressure rating • Outstanding resistance to corrosion, erosion, and seawater attack • High strength-to-weight ratio and excellent fatigue performance • Threaded design allows weld-free, fast installation and maintenance • Supplied with material test certificates and full traceability • Can be supplied with specialized surface finishes including anodizing or pickling Conclusion: DIN 2568 Titanium Flanges PN 64 from Ladhani Metal Corporation combine advanced material properties with precision engineering to offer a premium solution for high-pressure, corrosive, and high-performance applications. These flanges are engineered for longevity, reliability, and ease of use in the most demanding environments. For detailed specifications, custom machining, or technical support, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a trusted manufacturer and exporter of DIN 2561 titanium flanges, meticulously engineered for performance in low-pressure piping systems. The DIN 2561 standard outlines specifications for weld neck flanges with a nominal pressure rating of PN6, but we also offer extended options including PN10, PN16, PN25, and PN40 based on customer requirements. Our titanium flanges are crafted using premium-grade titanium alloys, ensuring exceptional corrosion resistance, lightweight strength, and reliability in critical environments such as chemical processing, marine systems, aerospace, and offshore operations. Flange types: • Weld neck flanges: Designed for high-integrity and stress-intensive piping systems • Raised face (RF): Enhances gasket performance and leak-proof sealing • Flat face (FF): Suitable where mating with brittle or non-metallic flange surfaces Grades, chemical composition, and applications: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium Chemical composition: Titanium (Ti): ≥ 98.90% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Applications: Ideal for chemical processing, desalination, marine applications, and medical equipment. Excellent resistance to seawater, chlorides, and oxidizing environments. Lightweight and biocompatible, widely used in offshore platforms, heat exchangers, and aerospace structures. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) – Titanium Alloy Chemical composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications: Common in high-performance and structural applications including aerospace, automotive, and deep-sea systems. High strength-to-weight ratio, excellent corrosion resistance, and thermal stability make it ideal for demanding engineering environments. Applications of DIN 2561 Titanium Flanges: Marine & Offshore Industries: titanium flanges ideal for offshore drilling rigs, subsea equipment, and desalination plants, ensuring reliable performance in marine environments. Chemical Processing: The superior corrosion resistance of titanium in aggressive chemicals makes it an excellent choice for reactors, pressure vessels, and pipelines used in chemical processing plants. Aerospace & Aviation: Titanium is used in aerospace applications due to its lightweight, high strength, and ability to withstand extreme temperatures. . Power Generation: In nuclear and thermal power plants, where materials must withstand high temperatures and corrosive conditions. Key features: • Manufactured as per DIN 2561 standard • High dimensional accuracy and surface finish • Custom sizes, face types, and drilling options available Conclusion: DIN 2561 titanium flanges from Ladhani Metal Corporation offer reliable, long-lasting performance in aggressive and weight-sensitive environments. With availability in grades like Titanium Grade 2 and Grade 5, these flanges meet international standards and suit a wide range of industrial applications. Our commitment to quality, precision, and customer satisfaction makes our titanium flanges a preferred choice across global industries. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

Product Name: Gr7 Titanium sheet Standard: ASTM B265 Material: Gr7 Unit Price: $222.5usd/kg-$285.7usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting Gr7 titanium sheet is high palladium content, and it is very resistant to corrosion. For example, titanium grade 7 is resistant to salt water and is also suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts. plate usually used for Pressure vessel, fastener, frame, Aerospace vehicle, Chemical industry, ocean engineering etc.

Product Name: Titanium Stud Bolts Standard: DIN938 DIN939 Material: Gr2 Gr5 Size: M3-M52 Surface: Polished

Standard: DIN127 Material: Gr5 Size: M2-M52 Surface: Polished Gr5 Titanium Spring Lock Washer DIN127 Titanium spring lock washer is the most commonly used part to prevent assembly components from loosening. They apply greater bolt tension per unit of applied torque, and provide protection against loosening resulting from vibration and corrosion. Product Information of Gr5 Titanium Spring Lock Washer DIN127 Material: GR2 GR5 Standard: DIN127 Technique: CNC/Forged Surface: Polished Size: M2-M52 Titanium grade 5 is the commonly used titanium alloy that is accounting about 50% of usage throughout the globe. This material is covering 6% aluminum and 4% of vanadium. This material is a good combination of various properties like corrosion-resistant, lightweight, high strength. This alloy is stronger in addition to having thermal properties and stiffness. Among its advantages, this alloy is heat treatable. Also, this grade possesses good weldability and fabricability.

Product Name:Titanium Sheet AMS 4901 Standard: AMS 4911 Material: Gr5 Unit Price: $18.5usd/kg-$48usd/kg Thickness: 0.3-6mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting

Name: Titanium sheet Standard: ASTM B265 Grade: Gr3

Product name:Titanium sheet Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr12, Gr23 Standard: ASTM B265/ASME B265 AMS 4911 ASTM F67 ASTM F136 Dimension： Thickness*Width:200-3000mm*Length:500-6000mm Supply status: Annealed(M) Package: Carton or plywood case. MTC: EN10204.3.1 certificate There is Grade 1, Grade 2, Grade 3, Grade4, Grade5, Grade 7, Grade 12 titanium plates in stock. Titanium plate is widely used in various fields, including metallurgy, electronics, medical, chemical, petroleum, medicine, aerospace, etc.. We offer competitive prices online, available incutting size as customers' requets. 1, Specifications Thickness range: 0.5mm-200mm Titanium coil plate/titanium coil strip: 0.1mm-0.5mm thick *1m/1.2m/1.5m wide. Standard plate: 0.5mm-20mm thick *1m*2m. Cold rolled plate: 1mm-4mm*1m*2m hot rolled plate: above 4mm thick wide and thick plate: above 5mm *2m*6m is a common specification, and specific specifications can also be customized according to customer requirements. 2, Material TA1 (Grade 1), TA2 (Grade 2), TA9 (Grade 7), TA10 (Grade 12), TA18 TC4 (Grade 5), TC6 and TC11 3.Standard dimension in stock: 1000 mm Width * 2000 mm Length 1500 mm Width* 6000 mm Length 2000 mm Width* 6000 mm Length 4,Surface:Pickled, polished, sand-blasted

Product Name: Gr7 Titanium sheet Standard: ASTM B265 Material: Gr7 Unit Price: $222.5usd/kg-$285.7usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting Gr7 titanium sheet is high palladium content, and it is very resistant to corrosion. For example, titanium grade 7 is resistant to salt water and is also suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts. plate usually used for Pressure vessel, fastener, frame, Aerospace vehicle, Chemical industry, ocean engineering etc. Product Name: Gr7 Titanium sheet Standard: ASTM B265 Material: Grade 7 (Ti-0.2Pd) Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting Quality inspections: Flaw detection, eddy current test, etc Grade Chemicai composition(WT%) (Ti) (Fe) (C) (N) (H) (O) (Pd) (Al) (Sn) Others Each Total Gr7 Ti-0.2Pd Remainder ≤0.30 ≤0.08 ≤0.03 ≤0.015 ≤0.25 0.12～0.25 / / ≤0.1 ≤0.4

Product name:Titanium sheet for knife making Grades: Gr5(Ti6Al4V) Standard: ASTM B265/ASME B265 Dimension： Thickness*Width:200-3000mm*Length:500-6000mm Supply status: Annealed(M) Package: Carton or plywood case Usually, the titanium alloy plate used for knife is Grade 5 (Ti6Al4V). This grade titanium material is one of the most widely used materials in titanium alloys. It has the same advantages as pure titanium: corrosion resistance, non-toxic, light weight, etc. There are also many of other advantages over pure titanium: higher hardness, tensile strength, yield strength and elongation. Can meet the needs of making knife. Titanium is a good material for knives if your main concern is light weight and corrosion resistance. Titanium knives are ideal for anyone who spends a lot of time around water or performs jobs that require frequent blade cleaning. Product name:Titanium sheet for knife making Grades: Gr5(Ti6Al4V) Standard: ASTM B265/ASME B265 Dimension： Thickness1-150mm*Width:200-3000mm*Length:500-6000mm Supply status: Annealed(M) Package: Carton or plywood case. MTC: EN10204.3.1 certificate MOQ : 10kgs Titanium plate applications

Product name:Titanium sheet metal Unit price:$14-$36.9/kg Material: Titanium grade 1 grade 2 grade 3 grade 4 Grade 5 (Ti6al4v),grade 7,grade 12 etc. Standard: ASTM/ASME B265 AMS 4911 ASTM F136 ASTM F67 etc. Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) Titanium has many obviously superior characteristics: small density (4.5kg/m3), high melting point (1660℃), strong corrosion resistance, high specific strength, good plasticity, but also through alloying and heat treatment methods to produce a variety of alloys with high mechanical properties, is an ideal aerospace engineering structural materials. Titanium sheet metal are commonly used in today's manufacturing industry, and the most commonly used grades are 2 and 5. Grade 2 titanium Grade 2 is commercial pure titanium used in most chemical processing plants and can be cold formed. Ultimate tensile strength of grade 2 plates and sheets up to 40,000 psi and above. Grade 5 titanium Class 5 is an aerospace class that does not allow cold molding and is therefore used more often when molding is not required. Grade 5 aerospace alloys have ultimate tensile strength of 120,000 psi and above. Usually the purpose of using Titanium sheet metal is to really approximate the final size of the part being manufactured. The material is processed to the nearest size of the required parts and the grain structure of the finished product is more uniform. Titanium plates are often used as insulation because titanium prevents heat from being transferred to the rest of the assembly. The titanium plate and titanium plate are bulletproof and provide good protection for the driver during the race. Application example: in addition to the use of industrial pure titanium manufacturing parts, a large number of titanium alloy is used. It is increasingly widely used in aerospace, aerospace, chemical, shipbuilding and other industrial sectors, manufacturing gas turbine components, the production of prosthetic devices and other biological materials

Product name:Titanium Shell and Tube Heat Exchangers Materials: stainless stainll Shell/gr2 titanium shell + Gr2 Pure Titanium Tube Special Use: Cooling, Evaporator Net Weight: Customizable Application: High temperature and pressure corrode fluids,seawater,saltwater,brine water etc. Titanium Shell and Tube Heat Exchangers Shell and tube heat exchanger, It is an inter wall heat exchanger with the wall of the tube bundle enclosed in the shell as the heat transfer surface. This kind of heat exchanger is simple in structure and reliable in operation. It can be made of various structural materials (mainly metal materials)It is composed of tube plate, shell, tube bundle and other parts. and can be used under high temperature and high pressure. It is the most widely used type at present -this is mainly due to their versatility. Applicable Industry: it plays an important role in chemical, petroleum, power, food and many other industrial production. In chemical production, it can be used as heater, cooler, condenser, evaporator and reboiler. Titanium Shell and Tube Heat Exchangers 17 Dimension(L*W*H) Customized Set Tempreture Customized Transport Package Wooden Packing Takeover Diameter Customized Liquid Flow Customized Plate Material Titanium/Stainless steel etc. Plate Thickness Heat exchange tube Customized A heat exchanger system facilitates the transfer of heat energy from one system to another. You can use them for both heating and cooling processes. Although you can make heat exchangers from different metals, these systems are made from titanium metal. Unlike the other predecessors, titanium heat exchangers are totally immune to corrosion. However, to work at full efficiency the device requires more surface area and a higher fluid flow rate. In most cases, you will find coil patterns. This is because they maximize the surface area of the tubes.

Product Name: Titanium seamless pipe for heat exchanger Standard: ASTM B338 Material: Gr1, Gr2 Unit Price: $25usd/kg-$40usd/kg Type: Seamless Shape: Round Outer Diameter: 21.3mm-609.6mm etc. Wall Thickness: 1.24-30mm Length: Max 16000mm Surface: Bright Titanium seamless pipe for heat exchanger The grade 2 titanium tube consists of commercial pure titanium or Unalloyed titanium. The oxygen content of grade 2 is standard. ASTM b861 GR 2 pipes can be easily welded. It also has excellent strength and ductility. The natural strength of metal is used for applications requiring very high strength, and the corrosion resistance is used for long-term appliances. Although most use cases are in industrial standards, titanium grade 2 seamless pipes can also be used in aesthetic and home applications. Due to the cost of raw materials and production costs, the cost is very high. The content of titanium in commercial pure CP grade 2 titanium welded pipe exceeds 99%. It can be cold drawn into titanium seamless pipe or hot rolled into welded pipe. They are used in high temperature applications, such as titanium 2-stage exhaust pipes, which can maintain their shape due to their high thermal conductivity, low thermal expansion and high oxidation resistance at high temperatures.

Product Name: Gr1 Titanium Shell & Tube Heat Exchangers Material:Titanium Gr1 Structure: Tube heat exchanger Types: Straight tubes, U-tube, kettle, coils etc. Size: Customized Tests: X ray, DP, UT, MT, PMI, helium leak etc. Gr1 Titanium Shell & Tube Heat Exchangers Relying on various excellent properties of industrial pure titanium, titanium heat exchanger is widely used in many industries and fields, such as seafood breeding, seawater heat exchange, brine heat exchange, chemical industry, food, metallurgy, refrigeration, light industry, electroplating industry, aluminum oxidation tank, salt making, papermaking, acoustic wave, electronic communication, central heating and so on. Product Name: Gr1 Titanium Shell & Tube Heat Exchangers Core Components:titanium tube, shell Condition:New Structure:Tube Heat Exchanger Maximum Working Pressure:0.1MPa Voltage:design as your need Weight:light in weight Dimension(L*W*H):customized Titanium tube material:gr1 titanium Tube thickness:0.9mm/1.2mm/2mm Shell material:titanium or titanium clad material Tube type:seamless or welded Titanium density:4.51g/cm3 MOQ:1set Video outgoing-inspection:Provided Machinery Test Report:Provided Marketing Type:Ordinary Product Warranty of core components:1 Year After Warranty Service:Video technical support Applicable Industries:Hotels, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Food Shop, Construction works , Energy & Mining, Food & Beverage Shops, other

Porduct name : Titanium steel clad tube sheet Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium steel clad tube sheet The tubesheet is in contact with both fluids and must therefore be corrosion-resistant and have metal-metallurgical and electrochemical properties suitable for fluid and velocity. Titanium is a good material to meet this, it has a good corrosion resistance to salt water and chromic acid. Tubesheet is widely used in tubular heat exchanger, boiler, pressure vessel, steam turbine, large central air conditioning and other industries. Tubeplate is mainly used in chemical vessels, such as tubular heat exchanger, pressure vessel, boiler, condenser, central air conditioning, evaporator, seawater desalination, to support the role of fixed tube, metal material makes it not only has strong rigidity, but also has great heat conduction performance.

Porduct name : Titanium Steel Clad Tube plate Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Gr12 Titanium Tube plate Heat exchanger tube plate generally adopts titanium steel composite material, titanium thickness is generally: 5.0mm 6.0mm 8.0mm 10 mm material: titanium Gr1,Gr2,Gr12, the thickness of the steel plate is :20,25, 30, 35, 40,45,50,60,80,100 mm, the thicker the thickness of the corresponding heat exchanger tube plate diameter is larger. The titanium steel composite tubesheet provided by our company is mainly used for heater and heat exchanger tubesheet in evaporating crystallization industry. It can be processed and punched according to customers' drawings. Customers only need to purchase and assemble it.

Porduct name : Titanium steel clad tube sheet for hear exchanger Material: Gr2 Titanium +steel,Gr2 Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium steel clad tube sheet for hear exchanger Porduct name : Gr2 titanium tube plate Material: Gr2 Titanium +steel,Gr2 Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Tube plate material: according to the need to use different environment, the use of different materials, carbon steel material generally use Q345R container plate, such as first and second pressure vessels, no corrosive medium flow, the use of carbon steel composite plate. In the case of strong acid, high pressure and high temperature, nuclear energy and other environments, stainless steel, 16 manganese, titanium alloy and other corrosion-resistant materials are needed. The application of new synthetic materials brings new vitality to tube-sheet products. With high pressure environment, but also to the case of corrosion resistance, considering the use of cost, generally choose high strength steel and corrosion resistant materials of composite material structure.

Porduct name : Titanium Steel Composite Tube plate Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium steel composite tube plate Name Clad Metal Base Metal Specification Standard Application Titanium-Steel Cladding plate TA1, TA2, TA9, TA10 Q235, Q245R Q345R Coating metal thickness: 0.5~50mm Base material thickness: 0.5~500mm ASME, ASTM petrochemical, vacuum salt making, Chlor-alkali, food, fertilizer, hydrometallurgy, electroplate and etc. Main applications: Titanium clad steel plate tube sheet is mainly used in two aspects: heat exchanger tube sheet and processing container plate. The total thickness of the tube sheet is 75-100mm and the thickness of the coating is 12-15mm. The total thickness of the processing vessel plate is 19-25mm and the coating thickness is 2-3mm. Titanium-steel clad plate has a good application prospect in the manufacture of heat exchanger tube sheet, large diameter (1800 mm) seamless head and reactor. Titanium clad steel plate tube sheet is used more in the reactor and terephthalic acid plant equipment, as well as ethylene glycol, maleic acid and rust remover production equipment. Some reservoirs have operating temperatures up to 200℃, internal pressure of 9 MPa, equipment diameters of 700 mm, length of 1080 mm, and composite plate thickness of (2 + 15) mm.For petrochemical equipment operating at ordinary high pressures and temperatures, the lining must provide good heat conduction and must withstand heat cycles, pressure differences and other pressures. Therefore, loose lining or spot welding additional lining is not satisfactory, but the titanium-steel clad plate can meet the above requirements. Titanium clad steel plates tube sheets are used not only in pressure vessels, heat exchangers and tubesheets, but also in the following applications: A. containers for municipal sewage treatment, which contain larger chloride. B. chemical distillation tanks for high temperature applications. C. water storage containers and containers for nuclear waste disposal

Product Name: Titanium Pipe Standard: ASTM B338 Material: Gr1, Gr2 Unit Price: $25usd/kg-$40usd/kg Type: Welded/Seamless Shape: Round Outer Diameter: 9.52mm/12.7mm/15.9mm/19mm/21.7mm/25.4mm/32mm/33.4mm/38mm/45mm etc. Wall Thickness: 0.5-3.0mm Length: Max 12000mm Surface: Bright

Product name: Gr1 Titanium seamless tube Standard:ASTM B338 Material:Grade 1 titanium Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr1 Titanium seamless tube The production process of titanium seamless pipe is complex. Three roll or multi roll rolling mill and drawing machine are usually used to roll or draw a certain specification of pipe blank through multiple passes, and finally produce seamless pipe after reducing diameter and wall. The production efficiency and yield of this process are low. Titanium seamless pipe from sponge titanium to pipe, through rolling or drawing, the material waste is large, the yield is only about 50%, and can not achieve mass production, and the production cycle is relatively long. Product name Titanium seamless tube Standard ASTM B861, ASTM B337, ASTM B338 Size OD5.0-114.0mmxWT0.5-7.0mmx1000-12000mm OD55mm-914mmxWT1.0-10.0mmx1000-6000mm Or according customer’s requirement. Material Titanium(Gr1, Gr2, Gr5, Gr7,Gr9,GR12) Technique Rolled Status Annealled Surface Acid wash,bright Application Exhaust pipe; exhaust pipe, petroleum pipeline;Sea farming; electroplating equipment;Fluid Transportation Piping etc. Certificate ISO9001:2008, TUV, EN10204.3.1 Types Out diameter Sizes Length NB Sizes (in stock) .0035” ~ 8” 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" Cut to length Titanium Seamless Tube (Custom Sizes) 6.35 mm OD To 101.6 mm OD As per requirement Cut to length Titanium seamless pipe features: 1. The thicker the wall thickness is, the more economical and practical it is. The thinner the wall thickness is, the higher its processing cost will be 2. The process of titanium seamless pipe determines its limited performance. Generally, the precision of seamless steel pipe is low, the wall thickness is uneven, the brightness of the inner and outer surface of the pipe is low, the sizing cost is high, and there are pockmarks and black spots on the inner and outer surface, which are not easy to remove 3. Its detection and shaping must be processed offline. Therefore, it embodies its advantages in high pressure, high strength and mechanical structure materials.

Product Name: Gr12 Titanium Seamless Tube Standard: ASTM B337,ASTM B338,ASTM B861, ASTM B862 Material: Titanium Gr12 Unit Price: $25usd/kg-$40usd/kg Type: Welded/Seamless Shape: Round Outer Diameter: 3-508mm Wall Thickness: 0.1-20mm Length: Max 12000mm Surface: Bright Gr12 Titanium Seamless Tube Titanium tubes have been widely used in chemical, petroleum, petrochemical, vacuum salt making, preparation, marine engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide, etc. titanium materials are widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve pipeline corrosion problems. Place of Origin:Shaanxi, China Material:ASTM B337,ASTM B338,ASTM B861, ASTM B862 Outer Diameter:3-508mm Wall Thickness:0.2-20mm Length:Max 15Meter Standard:ASTM B861 Application:Industrial Technique:Seamless Grade:Titanium Alloy Key Words:titanium tube Type:Titanium Round Tube Certificates:SO9001:2015 Processing:Drawing Surface:Bright Finished Shape:Round.square.Rectangle Package:plywood Case Titanium grade 12 pipe (Ti-0.3Mo-0.8Ni) Chemical compositions(weight%,<=) Mo Ni Fe C N 0.2-0.4 0.6-0.9 0.30 0.08 0.03 H O Ti Others Total 0.015 0.25 Remainder 0.10 0.40 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 440 345 18 ------- Titanium is widely used in chemical industry because of its high strength, light weight, good heat transfer performance and corrosion resistance. These characteristics of titanium make it a relatively economic method to solve engineering problems related to chemical industry. Although the investment cost of titanium is higher than that of general performance materials, titanium has been widely used in the chemical industry. According to the life cycle analysis, using it can reduce the production cost by reducing maintenance, shortening downtime, increasing product quality and increasing product life.