en10088stainlesssteel

EN 10088-3 X5NiCrTiMoVB25-15-2 is a high-alloy, precipitation-hardenable stainless steel grade engineered for applications requiring very high strength, excellent toughness, and good corrosion resistance under demanding service conditions. Alloyed with nickel, chromium, molybdenum, titanium, vanadium, and boron, this grade offers superior mechanical performance, enhanced hardenability, and stability at elevated temperatures. Supplied in rod form, X5NiCrTiMoVB25-15-2 stainless steel is suitable for advanced engineering, aerospace, and high-stress industrial applications. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5NiCrTiMoVB25-15-2 stainless steel rods. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy in accordance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5NiCrTiMoVB25-15-2): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Ni25 – Approx. 25% nickel • Cr15 – Approx. 15% chromium • Mo – Molybdenum alloyed for strength and corrosion resistance • Ti – Titanium for stabilization and precipitation hardening • V – Vanadium for grain refinement and strength • B – Boron for improved hardenability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 14.0 – 16.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 1.5 – 2.5 • Titanium (Ti): 0.3 – 0.7 • Vanadium (V): 0.1 – 0.3 • Boron (B): ≤ 0.010 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution treated and aged): • Tensile Strength: 900 – 1,300 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: Typically 300 – 420 HB after aging Key Features: • High-alloy precipitation-hardenable stainless steel • Very high strength and toughness • Good corrosion resistance in aggressive environments • Excellent hardenability and thermal stability • Suitable for high-stress and high-temperature service • Good structural integrity after heat treatment Material Characteristics: EN 10088-3 X5NiCrTiMoVB25-15-2 stainless steel rod delivers an exceptional combination of strength, toughness, and corrosion resistance. Its complex alloying system and precipitation-hardening capability make it suitable for components subjected to extreme mechanical loads and demanding operating conditions. Applications: • Aerospace and defense components • High-strength shafts, rods, and fasteners • Turbine and power-generation parts • Heavy engineering and structural components • Specialized industrial machinery Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X5NiCrTiMoVB25-15-2 stainless steel rods with reliable mechanical performance and consistent quality. With very high strength, excellent toughness, and advanced alloy design, X5NiCrTiMoVB25-15-2 stainless steel rod is an ideal choice for critical engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiCuMo17-11-3-2 is a high-alloy austenitic stainless steel grade with chromium, nickel, copper, and molybdenum additions, designed for excellent corrosion resistance, mechanical strength, and toughness. The copper improves resistance to oxidizing acids, while molybdenum enhances pitting and crevice corrosion resistance. Supplied in bar form, X3CrNiCuMo17-11-3-2 stainless steel is suitable for chemical, marine, and industrial applications requiring superior corrosion resistance and structural integrity. This grade complies with the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCuMo17-11-3-2 stainless steel bars. All materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy in full compliance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCuMo17-11-3-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr17 – Approx. 17% chromium • Ni11 – Approx. 11% nickel • Cu3 – Approx. 3% copper for improved corrosion resistance • Mo – Molybdenum for enhanced pitting and crevice corrosion resistance • 2 – Optional notation for specific temper or property Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 16.5 – 17.5 • Nickel (Ni): 10.0 – 12.0 • Copper (Cu): 2.5 – 3.5 • Molybdenum (Mo): 2.5 – 3.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 250 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 220 HB Key Features: • Austenitic stainless steel with Cu and Mo alloying • Excellent resistance to oxidizing acids and chloride environments • High pitting and crevice corrosion resistance • Good toughness, ductility, and mechanical strength • Good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiCuMo17-11-3-2 stainless steel bar combines superior corrosion resistance with reliable mechanical properties. Copper and molybdenum alloying ensures durability in chemical, marine, and industrial applications while maintaining good fabrication performance. Applications: • Chemical and petrochemical process equipment • Seawater and marine components • Acid-resistant piping and fittings • Pressure vessels and heat exchangers • Industrial and structural components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiCuMo17-11-3-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high mechanical performance, and full EN 10088-3 compliance, X3CrNiCuMo17-11-3-2 stainless steel bar is a reliable choice for demanding chemical, marine, and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrNiCuS18-9-2 is an austenitic stainless steel grade with copper and sulfur additions, designed to provide excellent corrosion resistance, good machinability, and moderate mechanical strength. The copper enhances resistance to oxidizing acids, while sulfur improves machinability for precision components. Supplied in rod form, X6CrNiCuS18-9-2 stainless steel is suitable for chemical, marine, and general engineering applications requiring both corrosion resistance and ease of machining. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiCuS18-9-2 stainless steel rods. All materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy in full compliance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiCuS18-9-2): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel • Cu – Copper addition for improved corrosion resistance • S – Sulfur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 1.5 – 3.0 • Sulfur (S): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 200 HB Key Features: • Austenitic stainless steel with copper and sulfur alloying • Excellent corrosion resistance in oxidizing acids and mild environments • Improved machinability due to sulfur addition • Good toughness and ductility • Easy to weld and fabricate with proper procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X6CrNiCuS18-9-2 stainless steel rod combines corrosion resistance with enhanced machinability and mechanical stability. Copper improves resistance to oxidizing acids, while sulfur allows precision machining for industrial and chemical applications. Applications: • Chemical processing equipment and fittings • Marine and seawater handling components • Precision shafts, pins, and fasteners • Industrial machinery and tooling components • General engineering and fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrNiCuS18-9-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, enhanced machinability, and full EN 10088-3 compliance, X6CrNiCuS18-9-2 stainless steel rod is a reliable choice for demanding industrial, chemical, and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiCu18-9-4 is a high-alloy austenitic stainless steel grade with copper addition, designed for excellent corrosion resistance and moderate mechanical strength. The copper enhances resistance to acidic environments, particularly nitric acid, while the combination of chromium and nickel provides general corrosion resistance and good toughness. Supplied in bar form, X3CrNiCu18-9-4 stainless steel is suitable for chemical, marine, and industrial applications where reliable corrosion resistance is required. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCu18-9-4 stainless steel bars. All materials are sourced from approved mills and supplied with consistent chemical composition, stable mechanical properties, and precise dimensional accuracy according to EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCu18-9-4): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel • Cu4 – Approx. 4% copper for enhanced corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 3.5 – 4.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 200 HB Key Features: • Austenitic stainless steel with copper addition • Excellent resistance to nitric acid and oxidizing environments • Good general corrosion resistance and toughness • Good weldability and formability • Stable mechanical properties in fabricated components • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiCu18-9-4 stainless steel bar provides a reliable combination of corrosion resistance, mechanical stability, and workability. Copper alloying enhances its performance in acidic environments while maintaining general-purpose corrosion protection for industrial and marine applications. Applications: • Chemical processing equipment • Marine and offshore components • Industrial piping and fittings • Acidic process vessels and heat exchangers • General engineering and structural components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiCu18-9-4 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With enhanced corrosion resistance, copper alloying, and full EN 10088-3 compliance, X3CrNiCu18-9-4 stainless steel bar is a reliable choice for demanding chemical and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1NiCrMoCu31-27-4 is a high-alloy austenitic stainless steel grade designed for extreme corrosion resistance in highly aggressive environments, including oxidizing and reducing acids, chloride-rich solutions, and seawater. The combination of nickel, chromium, molybdenum, and copper provides outstanding resistance to pitting, crevice corrosion, and general corrosion while maintaining high mechanical strength and toughness. Supplied in rod form, X1NiCrMoCu31-27-4 stainless steel is ideal for critical chemical, marine, and industrial applications. This grade complies with the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1NiCrMoCu31-27-4 stainless steel rods. Our materials are sourced from approved mills and supplied with controlled chemistry, consistent mechanical properties, and precise dimensional accuracy in full compliance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1NiCrMoCu31-27-4): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • Ni31 – Approx. 31% nickel • Cr27 – Approx. 27% chromium • Mo – Molybdenum alloyed • Cu4 – Approx. 4% copper for improved resistance to oxidizing acids Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 26.0 – 28.0 • Nickel (Ni): 30.0 – 32.0 • Molybdenum (Mo): 4.0 – 6.0 • Copper (Cu): 3.5 – 4.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 900 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 30% • Hardness: Typically ≤ 240 HB Key Features: • Highly alloyed austenitic stainless steel for extremely aggressive environments • Exceptional resistance to pitting, crevice, and general corrosion • High mechanical strength and toughness • Excellent resistance to oxidizing and reducing acids • Good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X1NiCrMoCu31-27-4 stainless steel rod combines superior corrosion resistance with excellent mechanical performance. Its alloying design ensures reliable long-term service in highly corrosive chemical, marine, and industrial environments. Applications: • Chemical and petrochemical processing equipment • Seawater and marine components • Acidic process equipment and piping systems • Pressure vessels and heat exchangers • Industrial and structural components in highly corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X1NiCrMoCu31-27-4 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With outstanding corrosion resistance, high mechanical strength, and full EN 10088-3 compliance, X1NiCrMoCu31-27-4 stainless steel rod is a reliable choice for demanding industrial and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrNiNb18-10 is a stabilized austenitic stainless steel grade with niobium addition for improved resistance to intergranular corrosion and excellent mechanical performance. The combination of chromium, nickel, and niobium provides high corrosion resistance, good toughness, and reliable performance in welded and fabricated components. Supplied in bar form, X6CrNiNb18-10 stainless steel is widely used in chemical, petrochemical, marine, and industrial applications where stability and durability are critical. This grade complies with the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiNb18-10 stainless steel bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiNb18-10): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel • Nb – Niobium stabilized for intergranular corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 11.0 • Niobium (Nb): 0.15 – 0.45 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 200 HB Key Features: • Austenitic stainless steel stabilized with niobium • Excellent resistance to intergranular corrosion • Good toughness and ductility over a wide temperature range • High corrosion resistance in chemical and marine environments • Good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X6CrNiNb18-10 stainless steel bar combines excellent corrosion resistance, stabilization against intergranular attack, and reliable mechanical performance. Its niobium stabilization ensures structural integrity in welded components and long-term service in aggressive environments. Applications: • Chemical and petrochemical equipment • Marine and offshore structural components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • General fabrication and engineering applications Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X6CrNiNb18-10 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, niobium stabilization, and full EN 10088-3 compliance, X6CrNiNb18-10 stainless steel bar is a reliable material for demanding industrial and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNiCuNb16-4 is a precipitation-hardened austenitic stainless steel grade designed for applications requiring high strength, good corrosion resistance, and excellent toughness. The alloying combination of chromium, nickel, copper, and niobium provides enhanced mechanical strength after age hardening while maintaining good corrosion resistance in moderately aggressive environments. Supplied in rod form, X5CrNiCuNb16-4 stainless steel is ideal for engineering, aerospace, and structural components requiring a balance of strength and corrosion performance. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNiCuNb16-4 stainless steel rods. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNiCuNb16-4): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr16 – Approx. 16% chromium • Ni4 – Approx. 4% nickel • Cu – Copper for precipitation hardening • Nb – Niobium for stabilization and age hardening Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 15.0 – 17.0 • Nickel (Ni): 3.0 – 5.0 • Copper (Cu): 3.0 – 5.0 • Niobium (Nb): 0.3 – 0.6 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed, aged condition): • Tensile Strength: 800 – 1,200 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 10% • Hardness: Typically 280 – 380 HB after aging Key Features: • Precipitation-hardened stainless steel with high strength • Good corrosion resistance in mildly aggressive environments • Excellent toughness and ductility after aging • High mechanical performance for structural and aerospace components • Good weldability and formability in annealed condition • Non-magnetic after solution annealing Material Characteristics: EN 10088-3 X5CrNiCuNb16-4 stainless steel rod combines high strength, corrosion resistance, and toughness. Its precipitation-hardening ability allows components to achieve superior mechanical performance while maintaining good corrosion resistance in industrial, marine, and engineering applications. Applications: • Aerospace and automotive components • High-strength shafts, rods, and fasteners • Structural and engineering assemblies • Springs, blades, and mechanical parts • Marine and offshore structural components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X5CrNiCuNb16-4 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high strength, and full EN 10088-3 compliance, X5CrNiCuNb16-4 stainless steel rod is a reliable material for demanding engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1NiCrMoCu25-20-5 is a high-alloy austenitic stainless steel grade designed for extreme corrosion resistance in highly aggressive environments, including oxidizing and reducing acids, chloride-rich media, and seawater. The combination of nickel, chromium, molybdenum, and copper provides outstanding resistance to pitting, crevice corrosion, and general corrosion, while maintaining good mechanical strength and toughness. Supplied in bar form, X1NiCrMoCu25-20-5 stainless steel is ideal for critical chemical, marine, and industrial applications. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1NiCrMoCu25-20-5 stainless steel bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1NiCrMoCu25-20-5): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • Ni25 – Approx. 25% nickel • Cr20 – Approx. 20% chromium • Mo – Molybdenum alloyed • Cu5 – Approx. 5% copper for improved resistance to oxidizing acids Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 4.0 – 6.0 • Copper (Cu): 4.0 – 5.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 850 MPa • Yield Strength: ≥ 250 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Highly alloyed austenitic stainless steel for extreme corrosive environments • Exceptional resistance to pitting, crevice, and general corrosion • High mechanical strength and toughness • Excellent resistance to oxidizing and reducing acids • Good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X1NiCrMoCu25-20-5 stainless steel bar combines outstanding corrosion resistance with excellent mechanical performance. Its alloying design ensures dependable long-term service in highly aggressive chemical, marine, and industrial environments. Applications: • Chemical and petrochemical processing equipment • Seawater and marine components • Acidic process equipment and piping systems • Pressure vessels and heat exchangers • Industrial and structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X1NiCrMoCu25-20-5 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high mechanical strength, and full EN 10088-3 compliance, X1NiCrMoCu25-20-5 stainless steel bar is a reliable solution for demanding industrial and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoAlTi12-9-2 is a highly alloyed austenitic stainless steel grade stabilized with aluminum and titanium. This combination of alloying elements provides excellent corrosion resistance, improved high-temperature strength, and prevention of intergranular corrosion. The titanium and aluminum stabilization prevents carbide precipitation during welding and service at elevated temperatures. Supplied in rod form, X1CrNiMoAlTi12-9-2 stainless steel is widely used in chemical, marine, and high-temperature industrial applications. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoAlTi12-9-2 stainless steel rods. All materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy according to EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoAlTi12-9-2): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • Cr12 – Approx. 12% chromium • Ni9 – Approx. 9% nickel • Mo – Molybdenum alloyed • Al – Aluminum stabilized • Ti – Titanium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 11.5 – 12.5 • Nickel (Ni): 8.0 – 10.0 • Molybdenum (Mo): 1.0 – 2.0 • Aluminum (Al): 0.20 – 0.60 • Titanium (Ti): 0.30 – 0.70 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 850 MPa • Yield Strength: ≥ 250 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Austenitic stainless steel with aluminum and titanium stabilization • Excellent resistance to general and localized corrosion • High-temperature strength and oxidation resistance • Good weldability and prevention of intergranular corrosion • Stable mechanical properties over a wide temperature range • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X1CrNiMoAlTi12-9-2 stainless steel rod provides a combination of corrosion resistance, high-temperature performance, and structural stability. Its dual stabilization with aluminum and titanium ensures reliable performance in welded constructions and demanding service environments. Applications: • Chemical and petrochemical equipment • Marine and offshore components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • High-temperature structural and engineering components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X1CrNiMoAlTi12-9-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high-temperature strength, and stabilization against intergranular corrosion, X1CrNiMoAlTi12-9-2 stainless steel rod is a reliable choice for demanding industrial and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrMoNb17-1 is a ferritic stainless steel grade alloyed with molybdenum and niobium, designed to provide enhanced corrosion resistance, good high-temperature stability, and improved resistance to intergranular corrosion. The addition of molybdenum improves resistance to pitting and crevice corrosion, while niobium stabilization enhances weldability and prevents grain boundary carbide precipitation. Supplied in bar form, X6CrMoNb17-1 stainless steel is widely used in industrial and engineering applications where durability, corrosion resistance, and structural stability are essential. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrMoNb17-1 stainless steel bars. Our products are sourced from approved mills and supplied with controlled chemistry, consistent mechanical properties, and dimensional accuracy in full compliance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrMoNb17-1): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr17 – Approx. 17% chromium • Mo – Molybdenum alloyed • Nb – Niobium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.80 – 1.50 • Niobium (Nb): ≤ 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 1.00 Mechanical Properties (Typical, annealed): • Tensile Strength: 450 – 650 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 20% • Hardness: Typically ≤ 220 HB Key Features: • Ferritic stainless steel with molybdenum and niobium addition • Improved resistance to pitting and crevice corrosion • Excellent resistance to intergranular corrosion • Good weldability and fabrication characteristics • Stable mechanical properties at elevated temperatures • Resistant to stress corrosion cracking Material Characteristics: EN 10088-3 X6CrMoNb17-1 stainless steel bar provides a reliable combination of corrosion resistance, thermal stability, and structural integrity. Its stabilized ferritic microstructure makes it suitable for welded constructions and long-term service in corrosive and high-temperature environments. Applications: • Chemical processing and industrial equipment • Heat exchangers and pressure components • Automotive exhaust systems • Structural components exposed to corrosive atmospheres • General engineering and fabrication applications Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X6CrMoNb17-1 stainless steel bars for demanding industrial and engineering applications. With enhanced corrosion resistance, niobium stabilization, and dependable mechanical performance, X6CrMoNb17-1 stainless steel bar is a reliable material choice. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.

EN 10088-3 X2CrTi17 is a titanium-stabilized ferritic stainless steel grade developed for applications requiring good corrosion resistance, improved weldability, and resistance to intergranular corrosion. The addition of titanium stabilizes carbon and nitrogen, preventing carbide precipitation during welding or exposure to elevated temperatures. Supplied in rod form, X2CrTi17 stainless steel is commonly used in fabrication and engineering applications where moderate strength, good formability, and long-term corrosion resistance are required. This grade is manufactured in accordance with EN 10088-3, which specifies technical delivery conditions for stainless steel bars and rods. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrTi17 stainless steel rods. Our materials are sourced from approved mills, ensuring controlled chemical composition, consistent mechanical properties, and full compliance with EN 10088-3 standards. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrTi17): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ti – Titanium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Titanium (Ti): ≤ 0.8 (stabilized, typically ≥ 5 × C) • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.60 Mechanical Properties (Typical, annealed): • Tensile Strength: 450 – 600 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 20% • Hardness: Typically ≤ 200 HB Key Features: • Titanium-stabilized ferritic stainless steel • Good resistance to intergranular corrosion • Good weldability without post-weld heat treatment • Good oxidation and scaling resistance • Stable mechanical properties at moderate temperatures • Cost-effective alternative to austenitic grades Material Characteristics: EN 10088-3 X2CrTi17 stainless steel rod offers reliable corrosion resistance and structural stability, especially in welded constructions. Its ferritic structure provides good resistance to stress corrosion cracking and makes it suitable for long-term service in mildly corrosive and elevated-temperature environments. Applications: • Automotive exhaust and emission system components • Heat-resistant rods and supports • Industrial fabrication and welded assemblies • Structural and architectural components • General engineering and manufacturing applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrTi17 stainless steel rods with consistent quality and reliable performance. With titanium stabilization, good corrosion resistance, and excellent weldability, X2CrTi17 stainless steel rod is well suited for fabrication and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrTiNb18 is a stabilized ferritic stainless steel grade containing chromium with titanium and niobium additions. These stabilizing elements improve resistance to intergranular corrosion and enhance weldability by preventing carbide precipitation. X2CrTiNb18 stainless steel offers good corrosion resistance in mildly aggressive environments, along with good formability and oxidation resistance. Supplied in bar form, this grade is widely used for structural and fabrication applications requiring dimensional stability and resistance to scaling at elevated temperatures. The material is manufactured in accordance with EN 10088-3 specifications for stainless steel bars and rods. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrTiNb18 stainless steel bars. Our products are sourced from certified mills and supplied with consistent quality, accurate chemistry, and dependable mechanical performance suitable for industrial and engineering uses. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar Explanation of Designation (X2CrTiNb18): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ti – Titanium stabilized • Nb – Niobium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.5 – 18.5 • Titanium (Ti): ≤ 0.8 (stabilized, typically ≥ 5 × C) • Niobium (Nb): ≤ 0.8 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.60 Mechanical Properties (Typical, annealed): • Tensile Strength: 450 – 600 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 20% • Hardness: Typically ≤ 200 HB Key Features: • Stabilized ferritic stainless steel with Ti and Nb • Good resistance to intergranular corrosion • Good oxidation and scaling resistance • Improved weldability compared to unstabilized ferritic grades • Good formability and dimensional stability • Cost-effective alternative to austenitic stainless steels Material Characteristics: EN 10088-3 X2CrTiNb18 stainless steel bar combines good corrosion resistance with stable mechanical properties. The dual stabilization with titanium and niobium ensures reliable performance during welding and service at moderately elevated temperatures, making it suitable for fabricated and welded components. Applications: • Automotive exhaust and structural components • Heat-resistant parts and supports • Industrial fabrication and welded structures • Appliances and equipment frames • General engineering and construction applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrTiNb18 stainless steel bars in round, hex, square, rectangular, and flat forms. With good corrosion resistance, stabilization against intergranular corrosion, and compliance with EN 10088-3 standards, X2CrTiNb18 stainless steel bar is a dependable choice for fabrication and structural applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoCuWN25-7-4 is a highly alloyed austenitic stainless steel grade designed for severe corrosive environments where exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking is required. The combined alloying of molybdenum, copper, tungsten, and nitrogen significantly enhances corrosion resistance and mechanical strength, especially in chloride-containing and acidic media. Supplied in rod form, X2CrNiMoCuWN25-7-4 stainless steel is suitable for critical chemical, marine, and industrial applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoCuWN25-7-4 stainless steel rods. Our materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoCuWN25-7-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr25 – Approx. 25% chromium • Ni7 – Approx. 7% nickel • Mo4 – Approx. 4% molybdenum • Cu – Copper alloyed for improved resistance to acidic corrosion • W – Tungsten alloyed for enhanced pitting and crevice corrosion resistance • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 6.0 – 8.0 • Molybdenum (Mo): 3.5 – 4.5 • Copper (Cu): 0.5 – 1.5 • Tungsten (W): 0.5 – 1.5 • Nitrogen (N): 0.20 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: ≥ 30% • Hardness: Typically ≤ 240 HB Key Features: • Highly alloyed stainless steel for extreme corrosive environments • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • Nitrogen-enhanced mechanical strength • Improved resistance to acidic and chloride-rich media • Good toughness and ductility • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMoCuWN25-7-4 stainless steel rod provides outstanding corrosion resistance combined with high mechanical strength. Its complex alloying system ensures reliable performance in highly aggressive chemical and marine environments while maintaining good fabrication properties. Applications: • Chemical and petrochemical processing equipment • Marine and offshore structures • Desalination and seawater handling systems • Acidic process equipment • Pressure-containing and structural components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoCuWN25-7-4 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, advanced alloying, and full EN 10088-3 compliance, X2CrNiMoCuWN25-7-4 stainless steel rod is an excellent choice for the most demanding industrial and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoN25-22-2 is a high-alloy austenitic stainless steel grade with very high chromium and nickel content, enhanced with nitrogen for improved mechanical strength and corrosion resistance. This grade offers excellent resistance to general corrosion, pitting, and crevice corrosion, particularly in aggressive and chloride-rich environments. Supplied in bar form, X1CrNiMoN25-22-2 stainless steel is suitable for critical industrial, chemical, and marine applications. This grade complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoN25-22-2 stainless steel bars. Our materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoN25-22-2): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • Cr25 – Approx. 25% chromium • Ni22 – Approx. 22% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 21.0 – 23.0 • Molybdenum (Mo): 1.5 – 2.5 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Very high corrosion resistance in aggressive environments • Nitrogen-enhanced mechanical strength • Excellent resistance to pitting and crevice corrosion • High toughness and ductility • Very good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X1CrNiMoN25-22-2 stainless steel bar provides an exceptional combination of corrosion resistance, strength, and structural stability. Its high alloy content and nitrogen strengthening ensure reliable performance in severe chemical and marine environments while maintaining excellent fabrication characteristics. Applications: • Chemical and petrochemical processing equipment • Marine and offshore structures • Desalination plants and seawater handling systems • Heat exchangers and pressure vessels • Industrial piping systems and fittings Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X1CrNiMoN25-22-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X1CrNiMoN25-22-2 stainless steel bar is a reliable solution for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiMoN27-5-2 is a high-alloy austenitic stainless steel grade with elevated chromium and nitrogen content, designed for applications requiring exceptional corrosion resistance, high strength, and excellent resistance to pitting and crevice corrosion. The addition of molybdenum and nitrogen significantly enhances performance in aggressive and chloride-rich environments while improving mechanical strength. Supplied in rod form, X3CrNiMoN27-5-2 stainless steel is suitable for demanding industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMoN27-5-2 stainless steel rods. All materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMoN27-5-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr27 – Approx. 27% chromium • Ni5 – Approx. 5% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.04 • Chromium (Cr): 26.0 – 28.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Nitrogen (N): 0.20 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: ≥ 30% • Hardness: Typically ≤ 240 HB Key Features: • High-chromium, nitrogen-alloyed stainless steel • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength due to nitrogen strengthening • Good toughness and ductility • Good weldability with controlled procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiMoN27-5-2 stainless steel rod combines very high corrosion resistance with enhanced mechanical strength. Its alloying design ensures reliable performance in highly aggressive service environments while maintaining good formability and toughness. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Desalination plants and seawater systems • Pressure-containing parts • Structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiMoN27-5-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X3CrNiMoN27-5-2 stainless steel rod is an excellent choice for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMo18-15-4 is a high-alloy austenitic stainless steel grade engineered for applications requiring excellent corrosion resistance, high toughness, and superior resistance to pitting and crevice corrosion. The increased molybdenum content enhances performance in chloride-rich and aggressive environments, while balanced chromium and nickel levels ensure a stable austenitic structure and good formability. Supplied in bar form, X2CrNiMo18-15-4 stainless steel is widely used in critical industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo18-15-4 stainless steel bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dependable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMo18-15-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni15 – Approx. 15% nickel • Mo4 – Approx. 4% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 14.0 – 16.0 • Molybdenum (Mo): 3.5 – 4.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 220 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Austenitic stainless steel with high molybdenum content • Excellent resistance to pitting and crevice corrosion • High toughness and ductility over a wide temperature range • Very good weldability and formability • Non-magnetic in annealed condition • Suitable for severe corrosive environments Material Characteristics: EN 10088-3 X2CrNiMo18-15-4 stainless steel bar offers a robust combination of corrosion resistance, toughness, and fabrication flexibility. Its high molybdenum content ensures superior performance in aggressive chemical and marine environments while maintaining excellent mechanical stability and workability. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • Structural components exposed to corrosive media Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMo18-15-4 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high toughness, and reliable mechanical performance, X2CrNiMo18-15-4 stainless steel bar is a dependable solution for demanding industrial, chemical, and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMo18-14-3 is a high-alloy austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, high toughness, and reliable performance in aggressive environments. With increased chromium, nickel, and molybdenum content, this grade offers strong resistance to pitting and crevice corrosion, particularly in chloride-containing media. Supplied in rod form, X2CrNiMo18-14-3 stainless steel is suitable for critical industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo18-14-3 stainless steel rods. Our products are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dependable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMo18-14-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni14 – Approx. 14% nickel • Mo3 – Approx. 3% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 13.0 – 15.0 • Molybdenum (Mo): 2.5 – 3.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 220 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Austenitic stainless steel with high chromium and molybdenum content • Excellent resistance to pitting and crevice corrosion • High toughness and ductility over a wide temperature range • Very good weldability and formability • Non-magnetic in annealed condition • Suitable for severe corrosive environments Material Characteristics: EN 10088-3 X2CrNiMo18-14-3 stainless steel rod provides a robust combination of corrosion resistance, toughness, and fabrication flexibility. Its alloy composition ensures stable performance in aggressive chemical and marine conditions while maintaining excellent mechanical integrity. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • Structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMo18-14-3 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, strong mechanical properties, and full EN 10088-3 compliance, X2CrNiMo18-14-3 stainless steel rod is a reliable solution for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-13-3 is a nitrogen-alloyed austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, high mechanical strength, and superior resistance to pitting and crevice corrosion. The combined addition of molybdenum and nitrogen enhances performance in chloride-bearing and aggressive environments while maintaining excellent toughness and ductility. Supplied in bar form, X2CrNiMoN17-13-3 stainless steel is widely used in chemical, marine, and heavy industrial applications where durability and long service life are essential. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-13-3 stainless steel bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-13-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ni13 – Approx. 13% nickel • Mo3 – Approx. 3% molybdenum • N – Nitrogen alloyed for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 12.0 – 14.0 • Molybdenum (Mo): 2.5 – 3.5 • Nitrogen (N): 0.10 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 320 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 240 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Excellent resistance to pitting and crevice corrosion • Higher strength than conventional austenitic grades • Excellent toughness and ductility • Very good weldability using standard procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiMoN17-13-3 stainless steel bar offers an excellent balance of corrosion resistance and mechanical strength. Nitrogen strengthening combined with molybdenum alloying ensures reliable performance in aggressive service environments while maintaining good formability and toughness. Applications: • Chemical and petrochemical processing equipment • Marine and offshore structures • Pressure vessels and heat exchangers • Industrial piping systems and fittings • Structural and load-bearing components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoN17-13-3 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X2CrNiMoN17-13-3 stainless steel bar is a dependable choice for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X38CrMo14 is a martensitic stainless steel grade alloyed with chromium and molybdenum, developed for applications requiring high strength, good wear resistance, and improved corrosion resistance compared to standard martensitic steels. The molybdenum addition enhances hardenability and resistance to pitting and crevice corrosion, while the martensitic structure allows the material to be heat treated to achieve high hardness and strength. Supplied in rod form, X38CrMo14 stainless steel is widely used in engineering and industrial components where mechanical performance and durability are critical. This grade complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X38CrMo14 stainless steel rods. Our materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X38CrMo14): • X – High-alloy steel • 38 – Approx. 0.38% carbon content • Cr14 – Approx. 14% chromium • Mo – Molybdenum alloyed for improved hardenability and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.42 • Chromium (Cr): 13.0 – 14.5 • Molybdenum (Mo): 0.50 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, quenched and tempered): • Tensile Strength: 900 – 1,100 MPa • Yield Strength: ≥ 700 MPa • Elongation: 10 – 14% • Hardness: Approx. 280 – 340 HB (depending on heat treatment) Key Features: • Martensitic stainless steel with high strength • Good wear and abrasion resistance • Improved corrosion resistance due to molybdenum • Heat-treatable to achieve high hardness • Good dimensional stability after heat treatment • Suitable for high-stress applications Material Characteristics: EN 10088-3 X38CrMo14 stainless steel rod provides a strong combination of strength, wear resistance, and corrosion performance. Its martensitic structure and molybdenum alloying allow reliable performance in demanding mechanical environments where durability and load-bearing capability are essential. Applications: • Shafts, spindles, and axles • Valve components and pump parts • Tooling and mechanical components • Industrial machinery parts • Wear-resistant engineering components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X38CrMo14 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With high strength, good wear resistance, and reliable corrosion performance, X38CrMo14 stainless steel rod is a dependable choice for demanding engineering and industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoV13-5-2 is a martensitic stainless steel grade alloyed with nickel, molybdenum, and vanadium, developed for applications requiring high strength, good toughness, and improved corrosion resistance compared to conventional martensitic steels. The addition of vanadium refines the grain structure and enhances wear resistance, while nickel improves toughness and molybdenum increases resistance to localized corrosion. Supplied in bar form, X2CrNiMoV13-5-2 stainless steel is widely used in high-performance engineering and industrial components. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoV13-5-2 stainless steel bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoV13-5-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr13 – Approx. 13% chromium • Ni5 – Approx. 5% nickel • Mo2 – Approx. 2% molybdenum • V – Vanadium alloyed for grain refinement and wear resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 12.0 – 14.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Vanadium (V): 0.10 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, quenched and tempered): • Tensile Strength: 850 – 1,050 MPa • Yield Strength: ≥ 650 MPa • Elongation: 12 – 15% • Hardness: Approx. 260 – 320 HB (depending on heat treatment) Key Features: • High-strength martensitic stainless steel • Good toughness due to nickel addition • Improved wear resistance from vanadium • Better corrosion resistance than standard martensitic grades • Heat-treatable for tailored mechanical properties • Suitable for demanding mechanical applications Material Characteristics: EN 10088-3 X2CrNiMoV13-5-2 stainless steel bar offers an excellent balance of strength, toughness, and corrosion resistance. Its alloying elements and martensitic structure allow it to perform reliably under high mechanical loads and dynamic stresses while maintaining reasonable corrosion performance. Applications: • Turbine and power generation components • Shafts, spindles, and high-stress machine parts • Oil and gas equipment • Engineering and industrial components • Wear-resistant mechanical parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiMoV13-5-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good toughness, and reliable corrosion resistance, X2CrNiMoV13-5-2 stainless steel bar is a dependable choice for advanced engineering and industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-11-2 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring enhanced strength, excellent corrosion resistance, and good resistance to pitting and crevice corrosion. The combined addition of molybdenum and nitrogen improves performance in chloride-containing and aggressive environments while maintaining good toughness and ductility. Supplied in rod form, X2CrNiMoN17-11-2 stainless steel is suitable for demanding industrial, marine, and chemical applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-11-2 stainless steel rods. Materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemistry, controlled mechanical properties, and precise dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-11-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ni11 – Approx. 11% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 10.0 – 12.0 • Molybdenum (Mo): 2.0 – 2.5 • Nitrogen (N): 0.10 – 0.22 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Improved strength compared to conventional austenitic grades • Excellent resistance to pitting and crevice corrosion • Good toughness and ductility • Very good weldability with standard procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiMoN17-11-2 stainless steel rod combines high corrosion resistance with enhanced mechanical strength due to nitrogen alloying. The molybdenum content further improves resistance to localized corrosion, making this grade suitable for severe service environments while retaining good formability and toughness. Applications: • Chemical and petrochemical equipment • Marine and offshore components • Pressure-containing parts • Industrial piping systems and fittings • Structural and load-bearing components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoN17-11-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X2CrNiMoN17-11-2 stainless steel rod is a dependable solution for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNiMo17-12-2 is an austenitic stainless steel grade alloyed with molybdenum, designed for applications requiring excellent corrosion resistance, good mechanical strength, and high toughness. The presence of molybdenum significantly improves resistance to pitting and crevice corrosion, especially in chloride-containing environments. Supplied in bar form, X5CrNiMo17-12-2 stainless steel is widely used in chemical, marine, and industrial applications where reliability and corrosion performance are critical. This grade complies with the EN 10088-3 standard, covering technical delivery conditions for stainless steel long products. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088-3 X5CrNiMo17-12-2 stainless steel bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent quality, accurate dimensions, and stable mechanical properties. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNiMo17-12-2): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr17 – Approx. 17% chromium • Ni12 – Approx. 12% nickel • Mo2 – Approx. 2% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.0 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 215 HB Key Features: • Austenitic stainless steel with molybdenum addition • Excellent resistance to pitting and crevice corrosion • Good toughness and ductility at low and high temperatures • Very good weldability and formability • Non-magnetic in annealed condition • Suitable for aggressive and chloride-rich environments Material Characteristics: EN 10088-3 X5CrNiMo17-12-2 stainless steel bar provides a reliable combination of corrosion resistance, mechanical strength, and fabrication flexibility. Its molybdenum-enhanced chemistry ensures superior performance in harsh chemical and marine conditions while maintaining excellent toughness and weldability. Applications: • Chemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Pharmaceutical and food processing equipment • Industrial piping systems and fittings Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X5CrNiMo17-12-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, strong mechanical performance, and full EN 10088-3 compliance, X5CrNiMo17-12-2 stainless steel bar is a trusted solution for demanding industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiN23-4 is a high-alloy austenitic stainless steel grade characterized by high chromium content, nitrogen alloying, and very low carbon levels. This composition provides excellent resistance to general corrosion, improved pitting resistance compared to standard austenitic grades, and enhanced mechanical strength due to nitrogen strengthening. Supplied in rod form, X2CrNiN23-4 stainless steel is suitable for demanding industrial and engineering applications where corrosion resistance, strength, and structural stability are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN23-4 stainless steel rods. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN23-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr23 – Approx. 23% chromium • Ni4 – Approx. 4% nickel • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 22.0 – 24.0 • Nickel (Ni): 3.0 – 5.0 • Nitrogen (N): 0.10 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 800 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 240 HB Key Features: • High-chromium austenitic stainless steel • Nitrogen-enhanced strength and pitting resistance • Excellent resistance to general and localized corrosion • Good toughness and ductility • Good weldability with appropriate procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiN23-4 stainless steel rod offers a combination of high corrosion resistance and improved mechanical strength compared to conventional austenitic grades. Nitrogen alloying enhances structural stability while maintaining good formability and toughness, making this grade suitable for demanding service environments. Applications: • Chemical processing equipment • Pressure-containing components • Structural and load-bearing parts • Marine and offshore applications • Industrial machinery and fabricated components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiN23-4 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With high chromium content, nitrogen strengthening, and reliable corrosion resistance, X2CrNiN23-4 stainless steel rod is an excellent choice for advanced industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X9CrNi18-9 is an austenitic stainless steel grade offering good corrosion resistance, reliable mechanical strength, and excellent formability. With a balanced chromium–nickel composition, this grade provides good resistance to oxidation and general corrosive environments while maintaining good toughness over a wide temperature range. Supplied in bar and rod form, X9CrNi18-9 stainless steel is suitable for general engineering and industrial applications where consistent performance and ease of fabrication are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088-3 X9CrNi18-9 stainless steel bars and rods. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X9CrNi18-9): • X – High-alloy steel • 9 – Approx. 0.09% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.030 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Austenitic stainless steel with balanced Cr–Ni content • Good general corrosion and oxidation resistance • Excellent formability and weldability • Good toughness at low and elevated temperatures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X9CrNi18-9 stainless steel bar and rod provides a reliable combination of corrosion resistance, strength, and workability, making it suitable for a wide range of fabricated and machined components. Applications: • General engineering components • Shafts, fasteners, and machined parts • Chemical and process equipment • Food processing and handling machinery • Architectural and industrial fabrications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X9CrNi18-9 stainless steel bars and rods in round, hex, square, rectangular, flat, and rod forms. With dependable corrosion resistance and excellent fabrication characteristics, X9CrNi18-9 stainless steel bar is a practical choice for diverse industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNiN19-9 is a nitrogen-alloyed austenitic stainless steel grade designed for applications requiring improved strength, excellent corrosion resistance, and good weldability. The controlled nitrogen addition increases yield strength and enhances resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in rod and bar form, X5CrNiN19-9 stainless steel is suitable for structural, engineering, and industrial applications where higher mechanical performance than standard austenitic grades is required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNiN19-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNiN19-9): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr19 – Approx. 19% chromium • Ni9 – Approx. 9% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 8.0 – 10.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 780 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength than conventional 18-8 grades • Excellent corrosion and pitting resistance • Good weldability and formability • Non-magnetic in annealed condition • Suitable for structural and pressure applications Material Characteristics: EN 10088-3 X5CrNiN19-9 stainless steel rod and bar combines enhanced mechanical strength with excellent corrosion resistance. Its nitrogen-strengthened austenitic structure ensures reliable performance in demanding service environments. Applications: • Structural and load-bearing components • Pressure vessels and piping systems • Chemical and petrochemical equipment • Food processing and pharmaceutical machinery • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X5CrNiN19-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With improved strength, excellent corrosion resistance, and dependable weldability, X5CrNiN19-9 stainless steel rod is a reliable choice for advanced engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiN18-10 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, improved strength, and good weldability. The controlled nitrogen addition enhances yield strength and resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in bar and rod form, X2CrNiN18-10 stainless steel is widely used in structural, engineering, and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN18-10 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN18-10): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 11.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength compared to standard X2CrNi18-9 • Excellent corrosion and pitting resistance • Good weldability with reduced risk of intergranular corrosion • Non-magnetic in annealed condition • Suitable for structural and load-bearing applications Material Characteristics: EN 10088-3 X2CrNiN18-10 stainless steel rod and bar offers an excellent combination of strength, corrosion resistance, and ductility. The nitrogen-enhanced austenitic structure ensures superior mechanical performance without sacrificing corrosion resistance. Applications: • Structural and load-bearing components • Chemical and petrochemical equipment • Pressure vessels and piping systems • Food processing and pharmaceutical industries • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiN18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, excellent corrosion resistance, and reliable weldability, X2CrNiN18-10 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNi18-9 is a low-carbon austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, good formability, and improved weldability. With reduced carbon content compared to standard austenitic grades, this steel minimizes the risk of intergranular corrosion after welding. Supplied in rod and bar form, X2CrNi18-9 stainless steel is widely used in fabrication and engineering applications where corrosion resistance and weld integrity are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi18-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent surface finish, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNi18-9): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nitrogen (N): ≤ 0.11 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 45% • Hardness: Typically ≤ 215 HB Key Features: • Low-carbon austenitic stainless steel • Excellent corrosion resistance • Improved weldability with reduced risk of intergranular corrosion • Good ductility and formability • Non-magnetic in annealed condition • Suitable for cold working and fabrication Material Characteristics: EN 10088-3 X2CrNi18-9 stainless steel rod and bar provides excellent corrosion resistance combined with good mechanical properties and weldability. Its austenitic microstructure ensures reliable performance in a wide range of industrial and environmental conditions. Applications: • Welded structures and fabricated components • Chemical and petrochemical equipment • Food processing and pharmaceutical equipment • Architectural and structural applications • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNi18-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, low carbon content, and good weldability, X2CrNi18-9 stainless steel rod is a dependable choice for fabrication and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X8CrNiS18-9 is a free-machining austenitic stainless steel grade developed for applications requiring good corrosion resistance, excellent machinability, and reliable mechanical properties. The controlled sulphur addition significantly improves chip breaking and machining performance compared to standard austenitic grades, while maintaining good resistance to atmospheric and mildly corrosive environments. Supplied in bar and rod form, X8CrNiS18-9 stainless steel conforms to the EN 10088-3 standard for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X8CrNiS18-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X8CrNiS18-9): • X – High-alloy steel • 8 – Approx. 0.08% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel • S – Sulphur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 750 MPa • Yield Strength: ≥ 230 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Free-machining austenitic stainless steel • Excellent machinability due to sulphur addition • Good corrosion resistance in mildly corrosive environments • Non-magnetic in annealed condition • Good formability and weldability with suitable procedures • Ideal for high-speed machining operations Material Characteristics: EN 10088-3 X8CrNiS18-9 stainless steel rod and bar offers a combination of good corrosion resistance and superior machinability. Its austenitic structure ensures toughness and ductility, making it suitable for precision-machined components with tight tolerances. Applications: • Precision-machined shafts and fittings • Fasteners, screws, and turned components • Automotive and engineering parts • Instrumentation and mechanical assemblies • General machining and industrial components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X8CrNiS18-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, reliable corrosion resistance, and consistent quality, X8CrNiS18-9 stainless steel bar is a preferred choice for precision machining and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNi18-10 is a widely used austenitic stainless steel grade known for its excellent corrosion resistance, good formability, and reliable mechanical properties. Equivalent to the commonly recognized AISI 304 grade, this steel contains approximately 18% chromium and 10% nickel, providing outstanding resistance to atmospheric corrosion and a wide range of chemical environments. Supplied in rod and bar form, X5CrNi18-10 stainless steel is suitable for general-purpose engineering, fabrication, and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNi18-10 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent surface finish, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNi18-10): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 17.5 – 19.5 • Nickel (Ni): 8.0 – 10.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nitrogen (N): ≤ 0.11 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 720 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 45% • Hardness: Typically ≤ 215 HB Key Features: • Austenitic stainless steel with excellent corrosion resistance • Good formability and ductility • Non-magnetic in annealed condition • Good weldability without preheating • Suitable for cold working and fabrication • Excellent surface finish capability Material Characteristics: EN 10088-3 X5CrNi18-10 stainless steel rod and bar offers excellent corrosion resistance combined with good mechanical strength and formability. Its fully austenitic structure ensures reliable performance in a wide range of industrial and environmental conditions. Applications: • Shafts, fasteners, and fittings • Food processing and pharmaceutical equipment • Chemical and petrochemical components • Architectural and decorative applications • General engineering and fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X5CrNi18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good mechanical properties, and wide usability, X5CrNi18-10 stainless steel rod is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X40CrMoVN16-2 is a martensitic stainless steel grade designed for applications requiring high strength, excellent toughness, good corrosion resistance, and superior fatigue performance. The combined addition of chromium, molybdenum, vanadium, and nitrogen improves hardenability, wear resistance, and grain refinement, making this grade suitable for demanding mechanical and engineering applications. Supplied in bar and rod form, X40CrMoVN16-2 stainless steel complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X40CrMoVN16-2 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X40CrMoVN16-2): • X – High-alloy steel • 40 – Approx. 0.40% carbon content • Cr16 – Approx. 16% chromium • Mo – Molybdenum addition for improved strength and corrosion resistance • V – Vanadium addition for grain refinement and wear resistance • N – Nitrogen addition for enhanced strength and toughness Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.44 • Chromium (Cr): 15.0 – 17.0 • Molybdenum (Mo): 0.80 – 1.20 • Vanadium (V): 0.10 – 0.30 • Nitrogen (N): 0.03 – 0.10 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 900 – 1,100 MPa • Yield Strength: ≥ 700 MPa • Elongation: 10 – 14% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-strength martensitic stainless steel • Excellent toughness and fatigue resistance • Improved wear resistance due to Mo and V additions • Good corrosion resistance compared to standard martensitic grades • Heat-treatable for enhanced mechanical performance • Suitable for high-load and dynamic applications Material Characteristics: EN 10088-3 X40CrMoVN16-2 stainless steel rod and bar offers a strong combination of strength, toughness, and corrosion resistance. Its martensitic microstructure, refined by vanadium and nitrogen, ensures reliable performance under high stress and cyclic loading conditions. Applications: • Turbine and power plant components • Shafts, rotors, and spindles • High-performance mechanical and structural parts • Pump and valve components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X40CrMoVN16-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent mechanical strength, toughness, and wear resistance, X40CrMoVN16-2 stainless steel bar is a reliable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X90CrMoV18 is a high-carbon martensitic stainless steel grade developed for applications requiring extremely high hardness, superior wear resistance, and excellent edge retention. Alloyed with chromium, molybdenum, and vanadium, this grade provides outstanding hardenability and enhanced abrasion resistance after heat treatment. Supplied in bar and rod form, X90CrMoV18 stainless steel is widely used in demanding tooling and precision engineering applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X90CrMoV18 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X90CrMoV18): • X – High-alloy steel • 90 – Approx. 0.90% carbon content • Cr18 – Approx. 18% chromium • Mo – Molybdenum addition for improved hardenability and wear resistance • V – Vanadium addition for grain refinement and enhanced abrasion resistance Chemical Composition (% – typical limits): • Carbon (C): 0.85 – 0.95 • Chromium (Cr): 17.0 – 19.0 • Molybdenum (Mo): 0.80 – 1.20 • Vanadium (V): 0.10 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 1,000 – 1,300 MPa • Yield Strength: ≥ 800 MPa • Elongation: 5 – 8% • Hardness: Can be significantly increased by quenching and tempering Key Features: • Ultra-high-carbon martensitic stainless steel • Exceptional hardness and wear resistance • Excellent edge retention and abrasion resistance • Good corrosion resistance for a martensitic grade • Heat-treatable for extreme mechanical performance • Suitable for heavy-duty tooling and precision applications Material Characteristics: EN 10088-3 X90CrMoV18 stainless steel rod and bar delivers outstanding wear resistance and hardness due to its high carbon and alloy content. Its martensitic microstructure, enhanced by molybdenum and vanadium, ensures long service life in severe operating conditions. Applications: • Industrial cutting tools and blades • Dies, punches, and wear plates • Precision tooling and machine components • Bearing and wear-resistant parts • High-load mechanical and engineering applications Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X90CrMoV18 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional hardness potential, superior wear resistance, and reliable corrosion performance, X90CrMoV18 stainless steel bar is an excellent choice for demanding tooling and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X70CrMo15 is a high-carbon martensitic stainless steel grade engineered for applications requiring very high hardness, excellent wear resistance, and good corrosion resistance. With high carbon content and alloying elements such as chromium and molybdenum, this grade delivers outstanding edge retention and mechanical strength after heat treatment. Supplied in rod and bar form, X70CrMo15 stainless steel is commonly used in precision, tooling, and wear-resistant components. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X70CrMo15 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X70CrMo15): • X – High-alloy steel • 70 – Approx. 0.70% carbon content • Cr15 – Approx. 15% chromium • Mo – Molybdenum addition for improved hardenability and wear resistance Chemical Composition (% – typical limits): • Carbon (C): 0.65 – 0.75 • Chromium (Cr): 14.0 – 15.5 • Molybdenum (Mo): 0.50 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 900 – 1,150 MPa • Yield Strength: ≥ 700 MPa • Elongation: 6 – 10% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance • Good corrosion resistance compared to standard martensitic grades • Outstanding edge retention after heat treatment • Heat-treatable for maximum mechanical performance • Suitable for precision and high-wear applications Material Characteristics: EN 10088-3 X70CrMo15 stainless steel rod and bar combines very high hardness potential with good corrosion resistance and mechanical strength. Its martensitic microstructure enables superior wear performance, making it ideal for components subjected to continuous abrasion and mechanical stress. Applications: • Cutting tools and industrial blades • Bearing components and wear parts • Shafts, pins, and spindles • Pump and valve components • Precision engineering and tooling Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X70CrMo15 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional wear resistance, high hardness capability, and reliable corrosion resistance, X70CrMo15 stainless steel rod is an excellent choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X46CrS13 is a free-machining martensitic stainless steel grade designed for applications requiring high hardness, good wear resistance, and improved machinability. The controlled sulphur addition enhances chip formation, making this grade especially suitable for precision machining and mass-production components. With higher carbon content than X39Cr13, X46CrS13 can achieve very high hardness after quenching and tempering while maintaining moderate corrosion resistance. Supplied in rod and bar form, this grade complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X46CrS13 stainless steel rods and bars. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X46CrS13): • X – High-alloy steel • 46 – Approx. 0.46% carbon content • Cr13 – Approx. 13% chromium • S – Sulphur addition for improved machinability Chemical Composition (% – typical limits): • Carbon (C): 0.42 – 0.50 • Chromium (Cr): 12.0 – 14.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 950 – 1,150 MPa • Yield Strength: ≥ 750 MPa • Elongation: 6 – 10% • Hardness: Can be significantly increased by quenching and tempering Key Features: • Free-machining martensitic stainless steel • Very high hardness and wear resistance after heat treatment • Improved machinability due to sulphur addition • Moderate corrosion resistance in mildly corrosive environments • Suitable for precision-machined components Material Characteristics: EN 10088-3 X46CrS13 stainless steel rod and bar offers a combination of very high hardness, good wear resistance, and enhanced machinability. Its martensitic microstructure allows efficient heat treatment, making it ideal for components requiring tight tolerances and high surface finish. Applications: • Precision-machined shafts and pins • Valve parts and pump components • Fasteners and fittings • Industrial tooling and wear parts • Mechanical and engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X46CrS13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, high hardness potential, and reliable mechanical performance, X46CrS13 stainless steel rod is a preferred choice for demanding machining and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X39Cr13 is a high-carbon martensitic stainless steel grade developed for applications requiring very high hardness, excellent wear resistance, and good mechanical strength, along with moderate corrosion resistance. With higher carbon content than X30Cr13, this grade can achieve superior hardness after quenching and tempering, making it suitable for demanding mechanical, tooling, and wear-resistant applications. Supplied in bar and rod form, X39Cr13 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X39Cr13 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X39Cr13): • X – High-alloy steel • 39 – Approx. 0.39% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.42 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 900 – 1,100 MPa • Yield Strength: ≥ 700 MPa • Elongation: 8 – 10% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance • Good strength and edge retention • Moderate corrosion resistance in atmospheric and mildly corrosive environments • Heat-treatable for maximum performance • Suitable for heavy-duty mechanical and tooling applications Material Characteristics: EN 10088-3 X39Cr13 stainless steel rod and bar offers very high hardness potential with strong mechanical properties. Its martensitic microstructure provides excellent wear resistance, making it ideal for components subjected to abrasion, friction, and high mechanical loads. Applications: • Cutting tools and blades • Shafts, pins, and spindles • Pump and valve components • Industrial tooling and wear parts • Mechanical and engineering assemblies Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X39Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior hardness potential, excellent wear resistance, and reliable mechanical strength, X39Cr13 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X30Cr13 is a high-carbon martensitic stainless steel grade designed for applications requiring very high hardness, excellent wear resistance, and good edge retention along with moderate corrosion resistance. With increased carbon content compared to X20Cr13, this grade achieves superior hardness after quenching and tempering, making it suitable for precision mechanical and tooling components. Supplied in rod and bar form, X30Cr13 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X30Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X30Cr13): • X – High-alloy steel • 30 – Approx. 0.30% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.35 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 850 – 1,050 MPa • Yield Strength: ≥ 650 MPa • Elongation: 8 – 12% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance • Good edge retention and strength • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for maximum mechanical performance • Suitable for precision and high-stress components Material Characteristics: EN 10088-3 X30Cr13 stainless steel rod and bar provides very high hardness potential combined with good mechanical strength. Its martensitic microstructure enables superior wear resistance, making it ideal for components exposed to friction, cutting, or repeated mechanical loading. Applications: • Cutting tools and blades • Shafts, pins, and spindles • Pump and valve components • Industrial tooling and machine parts • Mechanical and engineering assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X30Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness potential, strong mechanical properties, and dependable corrosion resistance, X30Cr13 stainless steel rod is a reliable choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X20Cr13 is a martensitic stainless steel grade developed for applications requiring higher strength, hardness, and wear resistance along with moderate corrosion resistance. With increased carbon content compared to X12Cr13, this grade can achieve higher hardness levels after heat treatment, making it suitable for demanding mechanical and tooling applications. Supplied in bar and rod form, X20Cr13 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X20Cr13 stainless steel rods and bars. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 specifications, ensuring consistent quality, precise chemical composition, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X20Cr13): • X – High-alloy steel • 20 – Approx. 0.20% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.16 – 0.25 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 550 MPa • Elongation: 10 – 14% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with higher carbon content • Excellent hardness and wear resistance after heat treatment • Moderate corrosion resistance in atmospheric and mildly corrosive environments • Good machinability in annealed condition • Suitable for high-stress mechanical components Material Characteristics: EN 10088-3 X20Cr13 stainless steel rod and bar offers high strength and hardness with reliable corrosion resistance. Its martensitic structure enables effective heat treatment, making it ideal for components subjected to heavy loads and wear. Applications: • Shafts, spindles, and axles • Valve parts and pump components • Tooling and mechanical parts • Turbine and power plant components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X20Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high hardness potential, good mechanical strength, and dependable corrosion resistance, X20Cr13 stainless steel bar is a strong choice for demanding engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X12Cr13 is a martensitic stainless steel grade designed for applications requiring good strength, wear resistance, and moderate corrosion resistance. With approximately 12–13% chromium content, this grade offers reliable resistance to atmospheric corrosion and mild chemical environments while providing good mechanical properties after heat treatment. Supplied in rod and bar form, X12Cr13 stainless steel is widely used in engineering and industrial components where durability and dimensional stability are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel bars, rods, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X12Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X12Cr13): • X – High-alloy steel • 12 – Approx. 0.12% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.08 – 0.15 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 450 MPa • Elongation: 12 – 18% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with good strength and wear resistance • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved hardness and mechanical performance • Good machinability in annealed condition • Suitable for precision-machined and structural components Material Characteristics: EN 10088-3 X12Cr13 stainless steel rod and bar offers a practical balance between mechanical strength and corrosion resistance. Its martensitic microstructure allows for flexibility in heat treatment, making it suitable for components subjected to mechanical stress and wear. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners and mechanical fittings • Industrial tools and equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X12Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With dependable mechanical properties, heat-treatable characteristics, and moderate corrosion resistance, X12Cr13 stainless steel rod is a reliable choice for engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNi12 is a martensitic stainless steel grade designed for applications requiring a combination of good mechanical strength, moderate corrosion resistance, and excellent toughness. With chromium and nickel additions, this grade offers improved hardenability and better impact properties compared to straight chromium martensitic steels. Supplied in bar and rod form, X2CrNi12 stainless steel is widely used in mechanical and structural applications where strength and durability are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel bars, rods, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi12 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNi12): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNi12 – Approx. 12% chromium with nickel addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 11.0 – 13.0 • Nickel (Ni): 0.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: 12 – 18% • Hardness: Can be increased by quenching and tempering Key Features: • Martensitic stainless steel with nickel addition • Good strength and toughness • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved hardness and wear resistance • Good impact properties compared to standard 12% Cr steels • Suitable for mechanical and structural components Material Characteristics: EN 10088-3 X2CrNi12 stainless steel rod and bar provides a balanced combination of strength, toughness, and corrosion resistance. Its martensitic structure allows heat treatment to achieve higher mechanical strength while maintaining reliable performance in service. Applications: • Shafts, rotors, and spindles • Turbine and power plant components • Mechanical and structural parts • Pump and valve components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNi12 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good mechanical strength, heat-treatable properties, and dependable corrosion resistance, X2CrNi12 stainless steel bar is a reliable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoCuN24-22-8 is a high-alloy austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, high strength, and superior performance in aggressive environments. With high chromium and nickel content, along with molybdenum, copper, and nitrogen additions, this grade offers outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking. Supplied in rod and bar form, X1CrNiMoCuN24-22-8 stainless steel is widely used in chemical processing, offshore, marine, and high-performance industrial applications. This grade conforms to the EN 10088-3 standard, which defines technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rods and bars. All materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring precise chemical composition, consistent mechanical properties, and excellent dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN24-22-8): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN24-22-8 – Approx. 24% chromium, 22% nickel, 8% molybdenum, with copper and nitrogen Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 23.0 – 25.0 • Nickel (Ni): 21.0 – 23.0 • Molybdenum (Mo): 7.0 – 9.0 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 220 HB Key Features: • Super austenitic stainless steel with very high alloy content • Exceptional resistance to pitting, crevice corrosion, and chloride attack • High strength due to nitrogen addition • Excellent toughness and ductility • Good weldability with appropriate procedures • Suitable for severe corrosive and high-temperature environments Material Characteristics: EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rod and bar combines superior corrosion resistance with high mechanical strength and excellent structural stability. Its fully austenitic microstructure ensures outstanding performance in harsh chemical and marine environments. Applications: • Chemical processing equipment • Offshore and marine components • Heat exchangers and condensers • Pressure vessels and piping systems • Oil & gas and petrochemical applications • Desalination and seawater handling systems Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high alloy strength, and reliable performance in aggressive environments, X1CrNiMoCuN24-22-8 stainless steel rod is an ideal choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoCuS17-10-2 is a free-machining austenitic stainless steel grade developed for applications requiring good corrosion resistance, improved machinability, and reliable mechanical performance. The addition of sulphur significantly enhances machinability, while chromium, nickel, and molybdenum provide resistance to general and localized corrosion. Copper improves resistance in certain acidic environments. Supplied in bar and rod form, X2CrNiMoCuS17-10-2 stainless steel is widely used for precision-machined components in industrial and engineering applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoCuS17-10-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent machinability, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoCuS17-10-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMoCu17-10-2 – Approx. 17% chromium, 10% nickel, 2% molybdenum, with copper • S – Sulphur added for improved machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 9.0 – 11.0 • Molybdenum (Mo): 1.5 – 2.5 • Copper (Cu): 0.5 – 2.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 220 MPa • Elongation: 30 – 40% • Hardness: Typically 160 – 220 HB Key Features: • Free-machining austenitic stainless steel • Excellent machinability for automatic and CNC machining • Good resistance to general and localized corrosion • Copper addition improves resistance in certain acidic environments • Good weldability (machining grades require controlled procedures) • Suitable for precision-machined components Material Characteristics: EN 10088-3 X2CrNiMoCuS17-10-2 stainless steel rod and bar combines good corrosion resistance with superior machinability. Its austenitic structure ensures good toughness and dimensional stability, making it ideal for high-productivity machining applications. Applications: • Precision-machined components • Shafts, fittings, and connectors • Valves, pump parts, and fasteners • Automotive and engineering components • Industrial hardware requiring high machinability Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoCuS17-10-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, reliable corrosion resistance, and stable mechanical properties, X2CrNiMoCuS17-10-2 stainless steel bar is a dependable choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoAlTi12-10-2 is a high-alloy austenitic stainless steel grade developed for applications requiring good corrosion resistance, excellent mechanical stability, and improved performance at elevated temperatures. The combined addition of molybdenum enhances resistance to pitting and general corrosion, while aluminium and titanium provide stabilization and improved oxidation resistance. Supplied in rod and bar form, X1CrNiMoAlTi12-10-2 stainless steel is suitable for demanding industrial and engineering applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoAlTi12-10-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoAlTi12-10-2): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMo12-10-2 – Approx. 12% chromium, 10% nickel, 2% molybdenum • AlTi – Aluminium and titanium additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 11.0 – 13.0 • Nickel (Ni): 9.0 – 11.0 • Molybdenum (Mo): 1.5 – 2.5 • Aluminium (Al): 0.30 – 1.00 • Titanium (Ti): Stabilizing addition • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 240 MPa • Elongation: 30 – 40% • Hardness: Typically 170 – 220 HB Key Features: • Austenitic stainless steel with aluminium and titanium additions • Good resistance to general and localized corrosion • Improved oxidation resistance at elevated temperatures • Good weldability and structural stability • High ductility and toughness • Suitable for thermal and corrosive service environments Material Characteristics: EN 10088-3 X1CrNiMoAlTi12-10-2 stainless steel rod and bar offers a balanced combination of corrosion resistance, thermal stability, and mechanical reliability. Its stabilized austenitic structure ensures dependable performance in industrial and high-temperature service conditions. Applications: • Chemical and petrochemical equipment • Heat exchangers and pressure vessels • Industrial furnace and high-temperature components • Structural and engineering parts • Power generation and process industry equipment Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoAlTi12-10-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, thermal stability, and reliable mechanical performance, X1CrNiMoAlTi12-10-2 stainless steel rod is a dependable choice for industrial and high-temperature applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrNiMoNb17-12-2 is a niobium-stabilized austenitic stainless steel grade designed for applications requiring good corrosion resistance, excellent resistance to intergranular corrosion, and reliable performance at moderately elevated temperatures. The combination of chromium, nickel, and molybdenum provides strong resistance to general and localized corrosion, while niobium stabilization prevents chromium carbide precipitation during welding and thermal exposure. Supplied in bar and rod form, X6CrNiMoNb17-12-2 stainless steel is widely used in chemical, industrial, and structural applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiMoNb17-12-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiMoNb17-12-2): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • CrNiMo17-12-2 – Approx. 17% chromium, 12% nickel, 2% molybdenum • Nb – Niobium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 11.0 – 13.0 • Molybdenum (Mo): 1.5 – 2.5 • Niobium (Nb): Stabilizing addition • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 220 MPa • Elongation: 35 – 45% • Hardness: Typically 160 – 200 HB Key Features: • Niobium-stabilized austenitic stainless steel • Excellent resistance to intergranular corrosion • Good resistance to pitting and general corrosion • Very good weldability without post-weld heat treatment • High ductility and toughness • Suitable for moderately elevated temperature service Material Characteristics: EN 10088-3 X6CrNiMoNb17-12-2 stainless steel rod and bar offers a reliable combination of corrosion resistance, thermal stability, and mechanical performance. Its niobium-stabilized austenitic structure ensures long service life, especially in welded components exposed to corrosive and thermal environments. Applications: • Chemical processing equipment • Heat exchangers and pressure vessels • Piping systems, flanges, and fittings • Industrial and structural components • Food processing and pharmaceutical equipment Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X6CrNiMoNb17-12-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent weldability, strong corrosion resistance, and stable mechanical properties, X6CrNiMoNb17-12-2 stainless steel bar is a dependable choice for chemical, industrial, and structural applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrNiMoTi17-12-2 is a titanium-stabilized austenitic stainless steel grade developed for applications requiring good corrosion resistance, improved resistance to intergranular corrosion, and reliable performance at moderately elevated temperatures. The combined alloying of chromium, nickel, and molybdenum enhances resistance to general and localized corrosion, while titanium stabilization prevents chromium carbide precipitation during welding or thermal exposure. Supplied in rod and bar form, X6CrNiMoTi17-12-2 stainless steel is widely used in chemical, industrial, and structural applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiMoTi17-12-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiMoTi17-12-2): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • CrNiMo17-12-2 – Approx. 17% chromium, 12% nickel, 2% molybdenum • Ti – Titanium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 11.0 – 13.0 • Molybdenum (Mo): 1.5 – 2.5 • Titanium (Ti): ≥ 5 × C (stabilizing addition) • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 220 MPa • Elongation: 35 – 45% • Hardness: Typically 160 – 200 HB Key Features: • Titanium-stabilized austenitic stainless steel • Improved resistance to intergranular corrosion • Good resistance to pitting and general corrosion • Excellent weldability without post-weld heat treatment • High ductility and toughness • Suitable for moderately elevated temperature service Material Characteristics: EN 10088-3 X6CrNiMoTi17-12-2 stainless steel rod and bar provides a balanced combination of corrosion resistance, thermal stability, and mechanical reliability. Its titanium-stabilized austenitic structure ensures long service life, particularly in welded components exposed to corrosive environments. Applications: • Chemical processing equipment • Heat exchangers and pressure vessels • Piping systems and fittings • Industrial and structural components • Food processing and pharmaceutical equipment Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X6CrNiMoTi17-12-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, excellent weldability, and stable mechanical properties, X6CrNiMoTi17-12-2 stainless steel rod is a dependable choice for chemical, industrial, and structural applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMnMoN25-18-6-5 is a high-alloy austenitic stainless steel grade developed for demanding environments requiring excellent corrosion resistance, high mechanical strength, and improved resistance to stress corrosion cracking. The combined alloying of chromium, nickel, manganese, molybdenum, and nitrogen enhances resistance to pitting, crevice corrosion, and general corrosion, particularly in chloride-containing environments. Supplied in rod and bar form, X2CrNiMnMoN25-18-6-5 stainless steel is suitable for critical industrial and chemical processing applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMnMoN25-18-6-5): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMnMoN25-18-6-5 – Approx. 25% chromium, 18% nickel, 6% manganese, 5% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 17.0 – 19.0 • Manganese (Mn): 5.0 – 7.0 • Molybdenum (Mo): 4.5 – 5.5 • Nitrogen (N): 0.20 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • High-alloy austenitic stainless steel with enhanced strength • Excellent resistance to pitting and crevice corrosion • Improved resistance to stress corrosion cracking • Good toughness and ductility • Suitable for aggressive chloride-containing environments • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rod and bar provides a strong combination of corrosion resistance, high strength, and durability. The nitrogen-alloyed austenitic structure ensures stable mechanical performance and long service life in aggressive chemical and industrial environments. Applications: • Chemical and petrochemical processing equipment • Offshore and marine components • Desalination and seawater systems • Heat exchangers, pressure vessels, and shafts • Industrial and structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high alloy content, and dependable mechanical performance, X2CrNiMnMoN25-18-6-5 stainless steel rod is an ideal choice for demanding industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMnMoN25-18-6-5 is a high-alloy austenitic stainless steel grade developed for demanding environments requiring excellent corrosion resistance, high mechanical strength, and improved resistance to stress corrosion cracking. The combined alloying of chromium, nickel, manganese, molybdenum, and nitrogen enhances resistance to pitting, crevice corrosion, and general corrosion, particularly in chloride-containing environments. Supplied in rod and bar form, X2CrNiMnMoN25-18-6-5 stainless steel is suitable for critical industrial and chemical processing applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMnMoN25-18-6-5): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMnMoN25-18-6-5 – Approx. 25% chromium, 18% nickel, 6% manganese, 5% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 17.0 – 19.0 • Manganese (Mn): 5.0 – 7.0 • Molybdenum (Mo): 4.5 – 5.5 • Nitrogen (N): 0.20 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • High-alloy austenitic stainless steel with enhanced strength • Excellent resistance to pitting and crevice corrosion • Improved resistance to stress corrosion cracking • Good toughness and ductility • Suitable for aggressive chloride-containing environments • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rod and bar provides a strong combination of corrosion resistance, high strength, and durability. The nitrogen-alloyed austenitic structure ensures stable mechanical performance and long service life in aggressive chemical and industrial environments. Applications: • Chemical and petrochemical processing equipment • Offshore and marine components • Desalination and seawater systems • Heat exchangers, pressure vessels, and shafts • Industrial and structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high alloy content, and dependable mechanical performance, X2CrNiMnMoN25-18-6-5 stainless steel rod is an ideal choice for demanding industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiCu19-9-2 is a precipitation-hardening austenitic stainless steel grade designed for applications requiring good corrosion resistance combined with higher strength achieved through age hardening. The controlled addition of copper enables precipitation strengthening, while chromium and nickel provide reliable resistance to general corrosion and oxidation. Supplied in bar and rod form, X3CrNiCu19-9-2 stainless steel is widely used in engineering and industrial components where strength, toughness, and corrosion resistance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCu19-9-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiCu19-9-2 – Approx. 19% chromium, 9% nickel, 2% copper Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 1.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 600 – 900 MPa (higher after aging) • Yield Strength: ≥ 300 MPa (can be significantly increased by precipitation hardening) • Elongation: 20 – 35% • Hardness: Typically 180 – 280 HB (after aging) Key Features: • Precipitation-hardening austenitic stainless steel • Good general corrosion resistance • Higher strength achievable through age hardening • Good toughness and fatigue resistance • Good weldability in solution-annealed condition • Suitable for structural and mechanical components Material Characteristics: EN 10088-3 X3CrNiCu19-9-2 stainless steel rod and bar offers a useful combination of corrosion resistance and enhanced strength through precipitation hardening. Its austenitic structure ensures good toughness and formability, while copper addition enables strength improvement for demanding service conditions. Applications: • Shafts, fasteners, and structural components • Mechanical and engineering parts • Pump and valve components • Aerospace and industrial hardware • Components requiring higher strength with corrosion resistance Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, precipitation-hardening capability, and reliable mechanical performance, X3CrNiCu19-9-2 stainless steel bar is a dependable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoCuN20-18-7 is a high-alloy austenitic stainless steel grade engineered for severe corrosive environments where excellent resistance to pitting, crevice corrosion, and stress corrosion cracking is required. The balanced addition of chromium, nickel, molybdenum, copper, and nitrogen provides superior performance in acidic, chloride-rich, and chemically aggressive conditions. Supplied in rod and bar form, X1CrNiMoCuN20-18-7 stainless steel is commonly used in chemical processing and critical industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN20-18-7): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN20-18-7 – Approx. 20% chromium, 18% nickel, 7% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 17.0 – 19.0 • Molybdenum (Mo): 6.0 – 7.5 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with excellent corrosion resistance • Outstanding resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-containing environments • High ductility and toughness • Very good weldability • Suitable for severe chemical and industrial applications Material Characteristics: EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rod and bar offers exceptional corrosion resistance combined with excellent mechanical properties. Its austenitic microstructure ensures long service life, high toughness, and reliable performance in aggressive service conditions. Applications: • Chemical and petrochemical processing equipment • Acid handling and storage systems • Offshore and marine components • Desalination and seawater treatment plants • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN20-18-7 stainless steel rod is an excellent choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrNiTi18-10 is a titanium-stabilized austenitic stainless steel grade designed for applications requiring good corrosion resistance, excellent weldability, and improved resistance to intergranular corrosion. The addition of titanium stabilizes carbon, preventing chromium carbide precipitation during welding or exposure to elevated temperatures. Supplied in bar and rod form, X6CrNiTi18-10 stainless steel is widely used in engineering, chemical, and structural applications where thermal stability and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiTi18-10 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiTi18-10): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • CrNi18-10 – Approx. 18% chromium and 10% nickel • Ti – Titanium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 12.0 • Titanium (Ti): ≥ 5 × C (stabilizing addition) • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 210 MPa • Elongation: 40 – 45% • Hardness: Typically 160 – 200 HB Key Features: • Austenitic stainless steel with titanium stabilization • Excellent resistance to intergranular corrosion • Good general corrosion resistance • Excellent weldability without post-weld heat treatment • High ductility and toughness • Suitable for elevated temperature applications Material Characteristics: EN 10088-3 X6CrNiTi18-10 stainless steel rod and bar provides reliable corrosion resistance and thermal stability. Its titanium-stabilized austenitic structure ensures long service life, especially in welded components exposed to moderately high temperatures. Applications: • Chemical processing equipment • Heat exchangers and pressure vessels • Exhaust systems and high-temperature components • Structural and engineering applications • Food processing and industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrNiTi18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent weldability, resistance to intergranular corrosion, and dependable mechanical performance, X6CrNiTi18-10 stainless steel bar is a reliable choice for chemical, structural, and high-temperature applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1NiCrMoCuN25-20-7 is a high-alloy austenitic stainless steel grade developed for extremely aggressive corrosive environments where exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking is required. With very high nickel and chromium content, combined with molybdenum, copper, and nitrogen, this grade provides outstanding resistance to acids, chlorides, and reducing environments. Supplied in bar and rod form, X1NiCrMoCuN25-20-7 stainless steel is widely used in chemical processing and severe service applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1NiCrMoCuN25-20-7): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • NiCrMoCuN25-20-7 – Approx. 25% nickel, 20% chromium, 7% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Nickel (Ni): 24.0 – 26.0 • Chromium (Cr): 19.0 – 21.0 • Molybdenum (Mo): 6.0 – 7.5 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with exceptional corrosion resistance • Excellent resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-rich environments • High ductility and toughness • Very good weldability • Suitable for severe chemical processing conditions Material Characteristics: EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rod and bar offers outstanding resistance to a wide range of aggressive chemicals while maintaining excellent mechanical properties. Its austenitic microstructure ensures high toughness, formability, and long-term reliability in critical service conditions. Applications: • Chemical and petrochemical processing equipment • Acid handling systems and reactors • Offshore and marine components • Desalination and seawater systems • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1NiCrMoCuN25-20-7 stainless steel bar is an excellent choice for critical chemical, marine, and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNb17 is a ferritic stainless steel grade stabilized with niobium, designed for applications requiring good corrosion resistance, excellent resistance to intergranular corrosion, and stable mechanical properties at elevated temperatures. The niobium addition prevents carbide precipitation, improving weldability and high-temperature performance. Supplied in bar and rod form, X3CrNb17 stainless steel is commonly used in automotive, industrial, and structural applications where oxidation resistance and thermal stability are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and other long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNb17 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNb17): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr17 – Approx. 17% chromium • Nb – Niobium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 16.0 – 18.0 • Niobium (Nb): 0.20 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 450 – 600 MPa • Yield Strength: ≥ 280 MPa • Elongation: 20 – 25% • Hardness: Typically 160 – 200 HB Key Features: • Ferritic stainless steel with niobium stabilization • Good resistance to general and intergranular corrosion • Excellent oxidation resistance at elevated temperatures • Good weldability without risk of sensitization • Stable mechanical properties during thermal cycling • Cost-effective alternative to austenitic grades Material Characteristics: EN 10088-3 X3CrNb17 stainless steel rod and bar offers reliable corrosion resistance combined with good thermal stability. Its ferritic structure and niobium stabilization make it suitable for components exposed to heat, oxidation, and moderate corrosive environments. Applications: • Automotive exhaust systems and components • Heat-resistant structural parts • Industrial furnace and heat exchanger components • Structural and engineering applications • Mechanical parts exposed to elevated temperatures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNb17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, thermal stability, and reliable mechanical performance, X3CrNb17 stainless steel bar is a dependable choice for automotive, industrial, and heat-resistant applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar