EN 10084 C10E is a low carbon case hardening steel grade designed for components that require a hard, wear-resistant surface with a tough and ductile core. With a nominal carbon content of approximately 0.10%, this grade is ideal for carburizing applications where surface hardness is developed through heat treatment while maintaining core strength. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for case hardening steels, C10E steel is widely used in automotive and mechanical engineering industries. The low carbon content ensures good formability and weldability before carburizing, while surface carbon enrichment during heat treatment significantly improves wear resistance. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10084 C10E round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C10E): • C – Carbon steel • 10 – Approx. 0.10% carbon content • E – Special quality steel with controlled sulphur and phosphorus (low impurity level) Chemical Composition (% – typical limits): • Carbon (C): 0.07 – 0.13 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 340 – 470 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 27% • Hardness (Core): 100 – 160 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on treatment conditions. Key Features: • Excellent case hardening response • Good machinability in annealed condition • Good weldability before carburizing • Tough and ductile core after heat treatment • Suitable for surface wear-resistant applications Material Characteristics: EN 10084 C10E round bars are primarily used where surface hardness and wear resistance are critical while maintaining a shock-resistant core. The material offers uniform carburizing characteristics and consistent mechanical performance after heat treatment. Applications: • Gears and pinions • Bushings and sleeves • Shafts and spindles • Cam components • Automotive transmission parts • Small mechanical components requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C10E round bars in various diameters and finishes. With excellent carburizing capability and reliable core toughness, C10E steel is widely used in automotive and general engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly