Mumbai
08048040025
+919029362692
EN 10083-3 alloy bars and plates

EN 10083-3 42CrMoS4 Alloy Steel Bar

In stock•cod not available
Phone Number

08048040025

Please keep 0 before dialling the number.

Email Address ladhanimetal@gmail.com

Mon-Thu: 10 AM - 2 PM • Fri: 3 PM - 7AM

Other Website Visit our other website
Address 435, Pathe Bapurao Marg , Mumbai 400004 , INDIA

Mumbai, India, 400004

Description

EN 10083-3 42CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade developed for applications requiring very high strength, excellent hardenability, and improved machinability. With a nominal carbon content of approximately 0.42%, this grade delivers superior tensile strength and wear resistance after quenching and tempering, while the addition of sulphur (S) enhances machining efficiency compared to 42CrMo4. Manufactured in accordance with EN 10083-3, 42CrMoS4 steel is widely used in heavy-duty engineering applications where components must withstand high stress and dynamic loading. Chromium improves hardenability and wear resistance, while molybdenum increases strength and resistance to tempering softening. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 42CrMoS4 alloy steel bars, supplied with mill test certificates and strict quality assurance as per international standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars Explanation of Designation (42CrMoS4): • 42 – Approx. 0.42% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1200 MPa • Yield Strength: ≥ 850 MPa • Elongation: ≥ 9 – 11% • Hardness: 280 – 340 HB (depending on section size and heat treatment) Key Features: • Very high tensile and yield strength • Excellent hardenability for thick sections • Improved machinability compared to 42CrMo4 • Good fatigue and impact resistance • Suitable for heavy-duty, precision-machined components Material Characteristics: EN 10083-3 42CrMoS4 alloy steel bar combines the high strength and deep hardening capability of chromium-molybdenum steel with enhanced machinability due to sulphur addition. It ensures consistent mechanical properties across large cross-sections and performs reliably under cyclic and heavy loads. Applications: • Heavy-duty shafts and axles • Gear shafts and transmission components • Crankshafts and connecting rods • High-strength bolts and studs • Oil and gas equipment parts • Construction and mining machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 42CrMoS4 alloy steel bars in a wide range of diameters and finishes. With superior strength, hardenability, and improved machinability, 42CrMoS4 steel bars are ideal for demanding automotive, mechanical, and heavy engineering applications. For stock details, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

standard EN 10083-3
material alloy steel
grade 42CrMoS4
Length 2000 mm to 6000 mm; custom lengths available
Thickness / Diameter Range 3 mm to 300 mm
Manufactured / Supplied by Ladhani Metal Corporation

Keywords

Other Products

view all
product image
Carbon Steel Pipes

Introduction JIS G 3452 specifies carbon steel pipes for ordinary piping purposes. These pipes are commonly used for conveying water, air, steam, gas, oil, and other fluids at relatively low operating pressures in industrial and general-purpose piping systems. The standard covers carbon steel pipes designed for general piping applications where reliable performance, weldability, and mechanical strength are required. These pipes are widely used in buildings, industrial facilities, utilities, and infrastructure projects. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of carbon steel products, including carbon steel pipes for industrial and general-purpose piping applications. Products can be sourced according to the required dimensions, quantity, and applicable technical specifications. Available Grades SGP (Steel Gas Pipe) Forms of Supply - Seamless carbon steel pipes, where specified and agreed - Electric resistance welded (ERW) carbon steel pipes - Black carbon steel pipes - Galvanized carbon steel pipes - Round carbon steel pipes - Cut-to-length carbon steel pipes - Threaded and plain-end carbon steel pipes - Customized carbon steel pipes according to project requirements Availability of each form depends on the required dimensions, manufacturing method, and project specifications. Chemical Composition and Mechanical Properties Grade: SGP Chemical composition (%): - Phosphorus (P): 0.040% maximum - Sulphur (S): 0.040% maximum Mechanical properties: - Tensile strength: 290 MPa minimum - Elongation: 30% minimum for applicable longitudinal test specimens - Elongation: 25% minimum for applicable transverse test specimens - Elongation requirements vary according to wall thickness and test specimen. The standard specifies phosphorus and sulphur limits for chemical composition. Mechanical properties and testing requirements depend on pipe dimensions, wall thickness, and applicable test conditions. Final acceptance should be based on the applicable JIS G 3452 edition, purchase specification, and material test certificate. Key Features - Designed for ordinary piping applications - Good mechanical strength and durability - Suitable for conveying water, air, steam, gas, and oil - Available in black and galvanized finishes - Suitable for industrial and general-purpose piping systems - Good weldability and fabrication characteristics - Custom dimensions and specifications according to project requirements Applications - Water supply and distribution systems - Gas distribution pipelines - Industrial piping systems - Air and steam piping - Oil transportation systems - Building and construction services - Plumbing and utility installations - Industrial plants and infrastructure - General-purpose fluid transportation Conclusion JIS G 3452 carbon steel pipes are used in ordinary piping systems requiring mechanical strength, durability, and reliable fluid transportation. SGP pipes are available in black and galvanized options for different piping requirements. To place an order or make an enquiry for JIS G 3452 carbon steel pipes, contact Ladhani Metal Corporation with your required grade, dimensions, heat-treatment condition, testing requirements, and quantity. #JISG3452 #JISG3452Steel #JISG3452Standard #JISG3452CarbonSteelPipes #CarbonSteelPipes #CarbonSteelTubes #GalvanizedSteelPipes #WeldedSteelPipes #ERWSteelPipes #BlackSteelPipes #WhiteSteelPipes #GeneralPiping #PipingMaterials #SteelPipes #MildSteelPipes #MSPipes #WaterSupplyPipes #IndustrialPiping #ConstructionPipes #PlumbingPipes #CarbonSteel #SteelPipeManufacturer #SteelPipeSupplier #SteelPipeExporter #SteelManufacturer #SteelSupplier #SteelStockist #JapaneseSteelStandards #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh

product image
Stainless Steel Pipes

Introduction JIS G 3446 specifies stainless steel pipes for machine and structural purposes. These pipes are designed for applications requiring corrosion resistance, mechanical strength, durability, and dimensional reliability in industrial and engineering environments. The standard covers stainless steel pipes used in machinery, structural components, equipment, and general engineering applications. Grade selection depends on the required corrosion resistance, mechanical properties, operating environment, and intended application. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of stainless steel products, including stainless steel pipes for mechanical, structural, and industrial applications. Products can be sourced according to the required grade, dimensions, quantity, and applicable technical specifications. Available Grades SUS303TKA | SUS304TKA | SUS304LTKA | SUS316TKA | SUS316LTKA | SUS321TKA | SUS347TKA | SUS304TKC | SUS316TKC | SUS405TKA | SUS430TKA | SUS430TKC | SUS444TKA | SUS403TKA | SUS410TKA | SUS416TKA | SUS420J1TKA | SUS420J2TKA | SUS431TKA | SUS440CTKA | SUS410TKC | SUS630TKA | SUS631TKA | SUS821L1TKA | SUS323LTKA | SUS329J1TKA | SUS329J3LTKA | SUS329J4LTKA Forms of Supply - Seamless stainless steel pipes - Electric resistance welded (ERW) stainless steel pipes - Hot-finished stainless steel tubes - Cold-finished stainless steel tubes - Round stainless steel pipes - Austenitic stainless steel tubes - Ferritic and martensitic stainless steel tubes - Duplex stainless steel tubes - Cut-to-length stainless steel pipes - Customized stainless steel pipes according to project requirements Availability of each form depends on the required grade, dimensions, and manufacturing specifications. Chemical Composition and Mechanical Properties Example grade: SUS304TKA Chemical composition (%): - Carbon (C): 0.08% maximum - Silicon (Si): 1.00% maximum - Manganese (Mn): 2.00% maximum - Phosphorus (P): 0.045% maximum - Sulphur (S): 0.030% maximum - Nickel (Ni): 8.00–10.50% - Chromium (Cr): 18.00–20.00% Mechanical properties: - Minimum proof stress: 205 MPa - Tensile strength: 520 MPa minimum - Elongation: 30% minimum for applicable longitudinal specimens - Elongation: 22% minimum for applicable transverse specimens Mechanical properties and elongation requirements depend on the manufacturing method, specimen type, tube dimensions, and wall thickness. Final acceptance should be based on the applicable JIS G 3446 edition, purchase specification, and material test certificate. Key Features - Designed for machine and structural applications - Available in austenitic, ferritic, martensitic, and duplex stainless steel grades - Good corrosion resistance in suitable operating environments - Excellent mechanical strength and durability - Suitable for automotive and engineering applications - Available in seamless and welded manufacturing options - Custom dimensions and specifications according to project requirements Applications - Automobile components and parts - Machinery and mechanical equipment - Bicycle frames and components - Furniture and structural assemblies - Industrial equipment and machinery - Mechanical shafts and structural components - Construction and infrastructure - General engineering applications - Corrosion-resistant equipment and structures Conclusion JIS G 3446 stainless steel pipes are used in machinery, automotive, and structural applications requiring corrosion resistance, mechanical strength, and durability. Grade selection depends on the required mechanical properties and operating conditions. To place an order or make an enquiry for JIS G 3446 stainless steel pipes, contact Ladhani Metal Corporation with your required grade, dimensions, heat-treatment condition, testing requirements, and quantity. #JISG3446 #JISG3446Steel #JISG3446Standard #JISG3446StainlessSteelTubes #StainlessSteelTubes #StainlessSteelPipes #StainlessSteel #SeamlessStainlessSteelTubes #WeldedStainlessSteelTubes #HeatResistantSteelTubes #CorrosionResistantSteel #IndustrialSteelTubes #MechanicalSteelTubes #StructuralSteelTubes #SteelPipes #SteelTubes #StainlessSteelPipesSupplier #StainlessSteelTubeManufacturer #StainlessSteelTubeSupplier #StainlessSteelExporter #SteelTubeExporter #EngineeringSteel #IndustrialMaterials #JapaneseSteelStandards #SteelProducts #SteelManufacturer #SteelSupplier #SteelStockist #SteelDistributor #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh

product image
Carbon Steel Tubes

Introduction JIS G 3445 specifies carbon steel tubes for machine structural purposes. These tubes are designed for applications requiring good machinability, dimensional accuracy, mechanical strength, and reliable performance in automotive, machinery, and general engineering components. The standard covers different grades of carbon steel tubes manufactured for mechanical and structural applications. These tubes are suitable for machining, fabrication, and further processing according to the requirements of the intended application. Ladhani Metal Corporation is a manufacturer, supplier, and exporter of carbon steel products, including carbon steel tubes for mechanical and industrial applications. Products can be sourced according to the required grade, dimensions, quantity, and applicable technical specifications. Available Grades STKM11A | STKM11B | STKM11C | STKM12A | STKM12B | STKM12C | STKM13A | STKM13B | STKM13C | STKM14A | STKM14B | STKM14C | STKM15A | STKM15C | STKM16A | STKM16C | STKM17A | STKM17C | STKM18A | STKM18B | STKM18C | STKM19A | STKM19C | STKM20A | STKM20C Forms of Supply - Seamless carbon steel tubes - Electric resistance welded (ERW) carbon steel tubes - Hot-finished carbon steel tubes - Cold-finished carbon steel tubes - Round carbon steel tubes - Precision carbon steel tubes - Cut-to-length carbon steel tubes - Customized carbon steel tubes according to project requirements Availability of each form depends on the required grade, dimensions, and manufacturing specifications. Chemical Composition and Mechanical Properties Example grade: STKM13A Chemical composition (%): - Carbon (C): 0.25% maximum - Silicon (Si): 0.35% maximum - Manganese (Mn): 0.30–0.90% - Phosphorus (P): 0.040% maximum - Sulphur (S): 0.040% maximum Mechanical properties: - Minimum yield strength: 215 MPa - Tensile strength: 370 MPa minimum - Elongation: 30% minimum for applicable longitudinal test specimens Mechanical properties and elongation requirements depend on tube dimensions, wall thickness, manufacturing method, and test specimen. Final acceptance should be based on the applicable JIS G 3445 edition, purchase specification, and material test certificate. Key Features - Designed for machine structural applications - Available in multiple carbon steel grades - Good machinability and mechanical strength - Suitable for cold working and machining operations - Offers dimensional accuracy and structural reliability - Suitable for automotive and industrial components - Custom dimensions and specifications according to project requirements Applications - Automobile components and parts - Machinery and mechanical equipment - Bicycle components and frames - Furniture and equipment structures - Drive shafts and machine shafts - Hydraulic and pneumatic components - Industrial machinery and equipment - General engineering components - Mechanical structural assemblies Conclusion JIS G 3445 carbon steel tubes are used in automotive, machinery, and engineering applications requiring mechanical strength, machinability, and dimensional accuracy. Grade selection depends on the required mechanical properties and application requirements. To place an order or make an enquiry for JIS G 3445 carbon steel tubes, contact Ladhani Metal Corporation with your required grade, dimensions, heat-treatment condition, testing requirements, and quantity.