en 10025 4 sheet plate coil strip

EN 10025-4 S460ML is a high-strength thermomechanically rolled fine-grain structural steel grade developed for demanding structural and fabrication applications requiring excellent impact toughness at low temperatures. Supplied in strip, plate, sheet, and coil form, S460ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure, consistent mechanical performance, and reliable low-temperature toughness. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S460ML steel strips, along with plates, sheets, and coils. Our materials are sourced from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S460M, S460ML Explanation of Designation: • S – Structural steel • 460 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.80 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 540 – 720 MPa • Yield Strength: ≥ 460 MPa • Elongation: 17% (for thickness ≤ 16 mm) Key Features: • Excellent impact toughness at −50°C • Very high yield strength for demanding structures • Thermo mechanically rolled for uniform fine-grain structure • Very good weldability with controlled welding procedures • Stable mechanical properties across thickness ranges • Available in strip, plate, sheet, and coil forms Material Characteristics: S460ML steel strip combines very high strength with superior low-temperature toughness. The fine-grain structure achieved through thermomechanical rolling ensures consistent mechanical behavior, good formability, and dependable performance in cold-climate and heavy-duty structural applications. Applications: • Structural steel fabrication in cold and sub-zero environments • Offshore and marine structures • Bridges and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S460ML steel strips along with plates, sheets, and coils for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and full compliance with EN 10025-4 standards, S460ML steel strip is a reliable and economical solution for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S460M is a high-strength thermomechanically rolled fine-grain structural steel grade developed for demanding structural and fabrication applications where higher load-bearing capacity, good toughness, and excellent weldability are required. Supplied in coil, plate, sheet, and strip form, S460M steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and stable mechanical properties across thickness ranges. This grade complies with the EN 10025-4 standard and is suitable for heavy-duty structural applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S460M steel coils, along with plates, sheets, and strips. Our materials are sourced from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S460M, S460ML Explanation of Designation: • S – Structural steel • 460 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.80 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 540 – 720 MPa • Yield Strength: ≥ 460 MPa • Elongation: 17% (for thickness ≤ 16 mm) Key Features: • High yield strength for heavy and highly loaded structures • Thermo mechanically rolled for refined fine-grain structure • Good toughness combined with excellent strength • Very good weldability with controlled welding procedures • Consistent mechanical properties across thickness ranges • Available in coil, plate, sheet, and strip forms Material Characteristics: S460M steel coil offers significantly higher strength compared to lower-grade structural steels while maintaining good toughness and fabrication performance. The thermomechanically rolled fine-grain structure ensures reliable performance under high stress and makes the material suitable for complex and weight-optimized structural designs. Applications: • Heavy structural steel fabrication • Bridges and large-span constructions • Industrial plants and power generation structures • Offshore and onshore structural components • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-4 S460M steel coils along with plates, sheets, and strips for high-strength structural applications. With thermomechanically rolled delivery, reliable mechanical properties, and full compliance with EN 10025-4 standards, S460M steel coil is an excellent solution for modern engineering and construction requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S420ML is a thermomechanically rolled fine-grain structural steel grade designed for high-strength structural and fabrication applications requiring excellent impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S420ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure, consistent mechanical properties, and reliable performance in demanding environments. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S420ML steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S420M, S420ML Explanation of Designation: • S – Structural steel • 420 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.18 • Manganese (Mn): ≤ 1.70 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 520 – 680 MPa • Yield Strength: ≥ 420 MPa • Elongation: 19% (for thickness ≤ 16 mm) Key Features: • Excellent impact toughness at −50°C • High yield strength for demanding structural applications • Thermo mechanically rolled for uniform fine-grain structure • Very good weldability with controlled welding procedures • Stable mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S420ML steel plate combines high strength with superior low-temperature toughness. The fine-grain structure achieved through thermomechanical rolling ensures consistent performance, good fabrication characteristics, and reliability in cold and heavy-duty structural applications. Applications: • Structural steel fabrication in cold and sub-zero environments • Offshore and marine structures • Bridges and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S420ML steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and full compliance with EN 10025-4 standards, S420ML steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S420M is a thermomechanically rolled fine-grain structural steel grade developed for high-strength structural and fabrication applications where superior load-bearing capacity, good toughness, and excellent weldability are required. Supplied in sheet, plate, coil, and strip form, S420M steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and stable mechanical properties. This grade complies with the EN 10025-4 standard and is suitable for demanding structural applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN Forms Available: plate, sheet, coil, strip Grades Available: S420M, S420ML Explanation of Designation: • S – Structural steel • 420 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.18 • Manganese (Mn): ≤ 1.70 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 520 – 680 MPa • Yield Strength: ≥ 420 MPa • Elongation: 19% (for thickness ≤ 16 mm) Key Features: • High yield strength for heavy-duty structural applications • Thermo mechanically rolled for refined fine-grain structure • Good toughness and strength balance • Excellent weldability with appropriate procedures • Consistent mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S420M steel sheet offers higher strength compared to S355 grades while maintaining good toughness and fabrication performance. The thermomechanically rolled fine-grain structure ensures reliable performance under high stress and makes the material suitable for complex structural components. Applications: • Heavy structural steel fabrication • Bridges and large-span constructions • Industrial plants and power generation structures • Offshore and onshore structural components • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-4 S420M steel sheets along with plates, coils, and strips for high-strength structural applications. With thermomechanically rolled delivery, reliable mechanical properties, and full compliance with EN 10025-4 standards, S420M steel sheet is an excellent choice for demanding engineering and construction requirements. For customized sizes, grade selection, or technical support, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S355ML is a thermomechanically rolled fine-grain structural steel grade developed for high-strength structural and fabrication applications requiring excellent low-temperature impact toughness. Supplied in strip, plate, sheet, and coil form, S355ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure, consistent mechanical performance, and dependable toughness at low temperatures. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S355ML steel strips, along with plates, sheets, and coils. Our materials are sourced from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S355M, S355ML Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.16 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Excellent impact toughness at −50°C • High yield strength with reliable low-temperature performance • Thermo mechanically rolled for uniform fine-grain structure • Very good weldability with controlled welding procedures • Stable mechanical properties across thickness ranges • Available in strip, plate, sheet, and coil forms Material Characteristics: S355ML steel strip offers a combination of high strength and superior low-temperature toughness. The fine-grain structure achieved through thermomechanical rolling provides consistent mechanical behavior, good formability, and reliable performance in demanding and cold-environment structural applications. Applications: • Structural steel fabrication in cold and sub-zero environments • Offshore and marine structures • Bridges and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S355ML steel strips along with plates, sheets, and coils for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and full compliance with EN 10025-4 standards, S355ML steel strip is a reliable and economical solution for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S355M is a thermomechanically rolled fine-grain structural steel grade designed for demanding structural and fabrication applications where higher strength, good weldability, and reliable toughness are required. Supplied in coil, plate, sheet, and strip form, S355M steel is delivered in thermo mechanically rolled (M) condition, providing a refined grain structure and consistent mechanical properties across thickness ranges. This grade complies with the EN 10025-4 standard and is suitable for structural applications requiring controlled strength and toughness. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S355M steel coils, along with plates, sheets, and strips. Our materials are procured from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S355M, S355ML Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.16 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Higher yield strength for demanding structural applications • Thermo mechanically rolled for fine-grain and uniform structure • Good toughness and strength balance • Excellent weldability with proper welding practices • Stable and reliable mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S355M steel coil provides higher strength compared to lower-grade structural steels while maintaining good toughness and fabrication performance. The thermomechanically rolled fine-grain structure ensures consistent behavior under load and reliable service performance in heavy-duty structural applications. Applications: • Structural steel fabrication • Bridges and heavy steel construction • Industrial plants and power generation structures • Offshore and onshore structural components • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-4 S355M steel coils along with plates, sheets, and strips for high-strength structural applications. With thermomechanically rolled delivery, reliable mechanical properties, and full compliance with EN 10025-4 standards, S355M steel coil is an excellent choice for modern structural and fabrication requirements. For customized sizes, grade selection, or technical support, contact Ladhani Metal Corporation.

EN 10025-4 S275ML Steel Plate EN 10025-4 S275ML is a thermomechanically rolled fine-grain structural steel grade developed for structural and fabrication applications requiring reliable strength and excellent impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S275ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and consistent mechanical performance. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S275ML steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S275M, S275ML Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.16 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • impact toughness at −50°C • Thermo mechanically rolled for uniform fine-grain structure • Good strength combined with excellent low-temperature toughness • Very good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S275ML steel plate offers enhanced low-temperature toughness along with reliable strength and good fabrication characteristics. The fine-grain structure achieved through thermomechanical rolling ensures dependable performance in cold climates and demanding structural applications. Applications: • Structural steel fabrication in cold and sub-zero environments • Offshore and marine structures • Bridges and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S275ML steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and compliance with EN 10025-4 standards, S275ML steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S275M is a thermomechanically rolled fine-grain structural steel grade designed for structural and fabrication applications where good strength, excellent toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S275M steel is delivered in thermomechanically rolled (M) condition, providing a refined grain structure and reliable performance. This grade complies with the EN 10025-4 standard and is suitable for structures subjected to moderate and low-temperature service conditions. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-4 S275M steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in thermomechanically rolled condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: sheet, plate, coil, strip Grades Available: S275M, S275ML Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • M – Thermomechanically rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.16 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Thermomechanically rolled for fine-grain structure • Good strength combined with excellent toughness • Improved weldability and formability • Uniform mechanical properties across thickness ranges • Suitable for low-temperature structural applications • Available in sheet, plate, coil, and strip forms Material Characteristics: S275M steel sheet offers a fine-grain microstructure achieved through thermomechanical rolling, resulting in reliable strength, good ductility, and enhanced toughness. The controlled rolling process ensures consistent performance and makes the material suitable for demanding structural applications. Applications: • Structural steel fabrication for buildings and bridges • Industrial structures and load-bearing components • Construction and civil engineering projects • Machinery frames and support structures • Outdoor and low-temperature service structures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S275M steel sheets along with plates, coils, and strips for structural and engineering applications. With thermomechanically rolled delivery, dependable mechanical properties, and compliance with EN 10025-4 standards, S275M steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.