EN 10088 SS X1NiCrMoCu31-27-4 Sheet

EN 10083-2 C45R is a medium carbon non-alloy steel grade supplied in the as-rolled (R) condition, suitable for applications requiring high strength, good toughness, and economical processing without additional heat treatment. With a nominal carbon content of around 0.45%, C45R steel provides higher strength and hardness than C35 and C40 grades, making it suitable for components subjected to moderate to high mechanical stress. Supplied in bar form, EN 10083-2 C45R steel is widely used in general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C45R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C45R): • C – Carbon steel • 45 – Approx. 0.45% carbon content • R – Supplied in as-rolled condition Chemical Composition (% – typical limits): • Carbon (C): 0.42 – 0.50 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, as-rolled): • Tensile Strength: 600 – 750 MPa • Yield Strength: ≥ 340 MPa • Elongation: ≥ 14% • Hardness: 180 – 220 HB Key Features: • Medium carbon steel supplied in as-rolled condition • High strength and hardness without heat treatment • Cost-effective and readily available material • Good machinability for standard machining operations • Suitable for welding with proper precautions Material Characteristics: EN 10083-2 C45R steel bar provides a strong balance of strength, toughness, and machinability in the as-rolled condition. Its higher carbon content ensures superior mechanical performance for moderately to heavily loaded components while maintaining economical processing. Applications: • Shafts, axles, and pins • Gears, couplings, and keys • Mechanical and structural components • Forged and machined parts • Automotive and general engineering parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C45R steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With high strength, ease of processing, and economical pricing, C45R steel bars are a reliable choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-2 C45E is a medium carbon non-alloy steel grade designed for applications requiring high strength, good toughness, and reliable performance with enhanced chemical quality. With a nominal carbon content of around 0.45% and controlled phosphorus and sulphur levels (E quality), C45E steel provides more consistent mechanical properties and improved reliability compared to standard C45 grades. Supplied in bar form, EN 10083-2 C45E steel is widely used in demanding mechanical and engineering applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C45E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C45E): • C – Carbon steel • 45 – Approx. 0.45% carbon content • E – Special quality steel with controlled phosphorus and sulphur content Chemical Composition (% – typical limits): • Carbon (C): 0.42 – 0.50 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, normalized / quenched & tempered): • Tensile Strength: 620 – 800 MPa • Yield Strength: ≥ 355 MPa • Elongation: ≥ 14% • Hardness: 190 – 230 HB (can be increased by heat treatment) Key Features: • Medium carbon steel with improved quality consistency • High strength and hardness with good toughness • Excellent response to quenching and tempering • Good machinability in normalized condition • Suitable for precision and load-bearing components Material Characteristics: EN 10083-2 C45E steel bar provides a strong combination of strength, toughness, and wear resistance with enhanced purity levels. Its medium carbon content enables effective heat treatment to achieve increased hardness and tensile strength, making it ideal for heavily stressed and precision-engineered components. Applications: • Shafts, axles, and crankshafts • Gears, pins, and keys • High-strength bolts and studs • Forged and machined components • Automotive and general engineering parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C45E steel bars in various industrial bar forms with consistent quality and dependable performance. With controlled chemistry, excellent heat-treatability, and wide industrial usability, C45E steel bars are a reliable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.

EN 10083-2 C40E is a medium carbon non-alloy steel grade designed for applications requiring higher strength, good toughness, and reliable performance with improved chemical quality. With a nominal carbon content of around 0.40% and controlled phosphorus and sulphur levels (E quality), C40E steel offers more consistent mechanical properties and better reliability than standard C40 grades. Supplied in bar form, EN 10083-2 C40E steel is widely used in mechanical engineering and industrial manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C40E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C40E): • C – Carbon steel • 40 – Approx. 0.40% carbon content • E – Special quality steel with controlled phosphorus and sulphur content Chemical Composition (% – typical limits): • Carbon (C): 0.37 – 0.44 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, normalized / quenched & tempered): • Tensile Strength: 600 – 750 MPa • Yield Strength: ≥ 350 MPa • Elongation: ≥ 14% • Hardness: 180 – 220 HB (can be increased by heat treatment) Key Features: • Medium carbon steel with improved quality consistency • Higher strength and hardness than C35 grades • Excellent response to quenching and tempering • Good machinability in normalized condition • Suitable for precision and load-bearing components Material Characteristics: EN 10083-2 C40E steel bar provides a strong combination of strength, toughness, and wear resistance with enhanced purity levels. Its medium carbon content allows effective heat treatment to achieve increased hardness and tensile strength, making it suitable for mechanically stressed and precision-engineered components. Applications: • Shafts, axles, and crankshafts • Gears, pins, and keys • High-strength bolts and studs • Forged and machined components • Automotive and general engineering parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C40E steel bars in various industrial bar forms with consistent quality and dependable performance. With controlled chemistry, excellent heat-treatability, and wide industrial usability, C40E steel bars are a reliable choice for engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation.