'ss 430 u type inner half round tube shield'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, and surface degradation in high-temperature and corrosive environments. These shields are used extensively in power plants, chemical processing units, and industrial heating systems. Their half-round construction enables fast and secure installation over both straight and curved tube surfaces, providing an effective barrier against damage from flue gas, slag, and particulate impact. SS 430 U Type Inner Half Round Tube Shield The SS 430 U Type Inner Half Round Tube Shield is manufactured from ferritic stainless steel grade 430, known for its good corrosion resistance, excellent thermal conductivity, and oxidation resistance. It performs reliably in moderate-temperature applications and provides dependable protection against scaling and surface deterioration. The inner U-type configuration is specifically engineered to cover the inside arc of U-bend tubes, which are particularly vulnerable to high-velocity gas flow and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes to guard against turbulence-driven erosion, slag buildup, and scaling in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 U Type Inner Half Round Tube Shields, offering reliable protection components for heat-exposed industrial systems. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and oxidizing environments where high thermal conductivity and scaling resistance are required, especially in non-welded systems. Uses • Installed on inner arc of U-bend tubes in boiler and superheater coils subject to flue gas turbulence • Protects return bends in WHRBs and HRSGs from surface degradation and slag impact • Used in heat exchangers and process heaters with moderate corrosion and temperature exposure • Applied in thermal processing plants, food-grade heating systems, and chemical units • Effective for curved coil protection in dryers, economizers, and incinerator heat recovery sections Features • Good corrosion and oxidation resistance – Performs well in moderately aggressive environments • Inner arc coverage – Specifically shields areas affected by heat, scale, and turbulent flow • Cost-effective – Offers a balance between performance and affordability for general-purpose applications • Thermal stability – Maintains structural integrity at service temperatures up to 815°C • Custom-fabricated – Tailored to match specific tube bend radius and outer diameter for secure fit • Easy installation – Compatible with clamp-on, banding, or weld-on mounting for fast and efficient assembly Applications • power generation – Used in superheater and economizer return bends to prevent scale and erosion • chemical and food industry – Applied in heat recovery systems requiring corrosion-resistant inner arc protection • waste heat recovery – Installed in WHRB and HRSG curved tubes to reduce slag and flue gas impact • dryers and kilns – Shields inner U-bend tubes in rotating or stationary heating equipment • process heating units – Provides mechanical and thermal protection for tubes exposed to oxidizing gas streams Conclusion The SS 430 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and economical solution for protecting the inner arcs of U-bend tubes in moderately corrosive and thermal environments. With its ferritic composition, good thermal performance, and ease of installation, it is ideal for general-purpose heat system applications. For technical assistance, customized dimensions, or quotations, please contact Ladhani Metal Corporation

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 430 U Type Half Round Tube Shield The SS 430 U Type Half Round Tube Shield is designed to safeguard U-bend sections in boilers, heat exchangers, and steam systems operating under moderate temperature and corrosion conditions. Made from SS 430, a ferritic stainless steel with high chromium content, it provides excellent resistance to oxidation and thermal scaling while offering good structural stability. The U-type configuration ensures comprehensive protection of both the inner and outer arcs of curved tubes, which are often the most vulnerable to wear, gas impact, and thermal fatigue. • Outer U Type Half Round Tube Shield – Protects the outer radius of the U-bend from flue gas impingement, thermal degradation, and mechanical erosion. • Inner U Type Half Round Tube Shield – Shields the inner curve of the bend from turbulence-induced wear, slag buildup, and scaling caused by repeated thermal cycling. Ladhani Metal Corporation manufactures and supplies SS 430 U Type Half Round Tube Shields for industrial systems requiring reliable heat resistance, cost-effectiveness, and mechanical protection in dry or mildly corrosive environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for systems exposed to dry heat, oxidation, and light chemical environments where resistance to scaling and thermal distortion is required. Uses • Protection of U-bend tube sections in superheaters, reheaters, and heat exchangers • Shielding tube bends in economizers, condensers, and air preheaters • Coverage for curved tubes in HRSGs and WHRBs operating under mild corrosive and high-temperature service • Erosion and scale resistance in return bends of process heaters and utility boilers • Ideal for food processing, petrochemical, and utility sectors where performance and economy are balanced Features • Excellent oxidation resistance – SS 430 performs well in dry air and moderately hot environments, resisting thermal scale formation. • Good dimensional stability – Maintains shape and strength under cyclic heating without excessive warping or fatigue. • Inner and outer protection – Offered in both U-type configurations to provide full coverage for return bends and critical curvature zones. • Precision engineered – Designed to fit tube radius and diameter for a secure, vibration-resistant fit that maintains consistent coverage. • Easy to install – Mounted using banding, tack welds, or clamping without the need to disassemble tube systems. • Economical and reliable – Combines good heat resistance and mechanical protection with cost-effectiveness for general industrial use. Applications • thermal power plants – Installed on U-bend tubes in superheaters and reheaters to protect against thermal fatigue and surface scaling. Improves tube longevity and efficiency. • petrochemical units – Used in systems where moderate corrosion resistance and high-temperature stability are required without the need for molybdenum or nickel alloys. • waste heat recovery systems – Shields curved tubes in WHRBs from slag buildup and gas erosion under high but controlled temperature conditions. • food and beverage processing – Suitable for heat exchangers and boilers where hygiene and thermal stability are essential with minimal corrosion risk. • utility and industrial boilers – Provides reliable protection for U-bend tubes exposed to hot combustion gases in moderate-duty systems. Conclusion The SS 430 U Type Half Round Tube Shield from Ladhani Metal Corporation is a dependable and cost-effective solution for protecting U-bend tube sections in systems operating under dry heat and light chemical exposure. With strong oxidation resistance, good structural stability, and precision-fit configurations, these shields are ideal for various industrial applications, including power generation, heat recovery, and process heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, and thermal damage in high-temperature environments. These shields are essential in applications where tube surfaces are exposed to abrasive flue gases, slag buildup, and turbulent flow conditions. Their half-round design allows secure placement over straight or curved tube sections, offering durable protection and prolonging service life without requiring major system modifications. SS 420 U Type Inner Half Round Tube Shield The SS 420 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, known for its high surface hardness, excellent wear resistance, and fair corrosion resistance. This grade is ideal for applications where mechanical erosion is a concern. The inner U-type configuration is engineered to protect the internal curvature of U-bend tubes, which are commonly affected by localized turbulence, scale accumulation, and repeated thermal cycling. • Inner U Type Half Round Tube Shield – Specifically designed to guard the internal arc of U-bend tubes from erosion, slag impact, and high-temperature scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 420 U Type Inner Half Round Tube Shields, offering durable and cost-effective protective components for demanding industrial environments. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for systems where tubes are exposed to abrasive gases, slag, and scaling, especially where high surface hardness and moderate corrosion resistance are required. Uses • Installed on the inner arc of U-bend tubes in high-temperature boiler and superheater sections • Shields return bends in WHRBs, HRSGs, and industrial furnace coils exposed to abrasive or turbulent flow • Applied in curved tube sections of heat exchangers and reformers subject to slag and scale deposits • Used in chemical and petrochemical units handling combustion gases and steam • Effective in power and process plants where mechanical wear and erosion resistance are crucial Features • High wear resistance – Excellent surface hardness provides long-lasting protection in abrasive environments • Inner arc coverage – Shields areas prone to turbulence, scale buildup, and gas erosion • Thermal durability – Performs reliably in elevated temperature service conditions up to 650°C • Custom design – Tailored to match the exact tube bend radius and diameter for optimal protection • Simple installation – Compatible with clamp-on, weld-on, or banding methods for secure fitment • Economical solution – Combines durability and affordability for routine and critical tube protection needs Applications • thermal power plants – Protects inner surfaces of U-bends in superheaters and economizers from erosion • petrochemical processing – Shields tube bends exposed to acidic and particulate-laden gases • waste heat recovery units – Guards against scale and slag accumulation in WHRB and HRSG return bends • chemical industries – Provides erosion resistance in heat exchanger bends carrying corrosive vapors • furnaces and process heaters – Used on return coil sections exposed to direct flame or hot gases Conclusion The SS 420 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers robust inner arc protection for U-bend tubes in high-wear and high-temperature applications. Its excellent hardness and mechanical resilience make it well-suited for thermal systems facing abrasive and corrosive environments. For technical assistance, customization, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger, boiler, and superheater tubes from erosion, scaling, slag deposition, and corrosion under high-temperature operating conditions. These shields are widely used in industries such as power generation, petrochemical processing, waste heat recovery, and chemical manufacturing. Their half-round structure allows for quick installation over curved or straight tube sections, providing dependable protection and extending equipment lifespan without requiring major disassembly. SS 316L U Type Inner Half Round Tube Shield The SS 316L U Type Inner Half Round Tube Shield is fabricated from low-carbon austenitic stainless steel grade 316L. It offers superior corrosion resistance, particularly in chloride-rich or acidic environments, and improved weldability with reduced risk of intergranular corrosion after welding. The inner U-type configuration is specifically engineered to shield the inner arc of U-bend tubes—an area highly vulnerable to turbulence-induced erosion, scaling, and thermal fatigue. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from flue gas turbulence, localized corrosion, and heat-induced scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316L U Type Inner Half Round Tube Shields, providing durable and customizable shielding solutions for demanding thermal and corrosive applications. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for welded systems and high-temperature environments exposed to chlorides, acidic gases, or steam, where resistance to corrosion and thermal degradation is essential. Uses • Shields inner arcs of U-bend tubes in boilers, superheaters, and reheaters operating in corrosive and high-heat zones • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs subjected to scaling and slag formation • Used in curved tube sections of steam reformers, condensers, and marine heat exchangers • Applied in chemical and fertilizer plants with exposure to acidic, chloride-rich, or humid gases • Suitable for welded assemblies where protection against intergranular corrosion is necessary Features • Excellent corrosion resistance – Enhanced performance in acidic, chloride-laden, and high-moisture environments • Low carbon content – Minimizes risk of intergranular corrosion after welding or high-temperature service • Inner bend protection – Shields areas affected by turbulence, localized heat, and erosion • High-temperature durability – Performs reliably in oxidizing environments up to 870°C • Custom fabrication – Tailored to match specific tube diameters and bend radii for a secure, gap-free fit • Easy installation – Suitable for clamp-on, banding, or weld-on mounting without requiring full system disassembly Applications • power generation – Inner U-type shields for protecting boiler and economizer bends in thermal power stations • petrochemical facilities – Guards internal tube bends exposed to chlorides and hot process gases in reformers • waste heat recovery systems – Applied to WHRBs and HRSGs for inner arc protection from flue gas scaling • chemical processing units – Used in reactors and exchanger coils to resist chemical and thermal corrosion • marine and offshore systems – Ensures long-term durability of U-bends exposed to saltwater-laden environments Conclusion The SS 316L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant protective component designed for inner arc shielding in U-bend tubes operating under harsh thermal and chemical conditions. With its superior weldability, resistance to pitting, and high-temperature strength, it is ideal for critical service in energy, chemical, and marine applications. For technical support, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler tubes, superheaters, and heat exchangers operating under harsh thermal and corrosive conditions. Designed for installation over curved or straight tube sections, these shields help prevent erosion, slag accumulation, scaling, and high-temperature corrosion. Their half-round shape allows for quick and secure mounting, extending tube service life and minimizing unplanned maintenance in power plants, petrochemical facilities, and other high-temperature industrial systems. SS 316 U Type Inner Half Round Tube Shield The SS 316 U Type Inner Half Round Tube Shield is manufactured from molybdenum-bearing austenitic stainless steel grade 316, offering enhanced resistance to pitting, crevice corrosion, and chloride-induced attack. The inner U-type configuration is specifically designed to cover the internal arc of U-bend tubes, where gas turbulence and heat concentration tend to cause localized wear and scaling. This makes it an ideal choice for systems operating in corrosive, chloride-rich, or marine environments. • Inner U Type Half Round Tube Shield – Protects the internal curvature of U-bend tubes from high-temperature scaling, erosion, and corrosion due to turbulent gas flow and thermal cycling. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 316 U Type Inner Half Round Tube Shields, offering precision-fabricated shielding solutions tailored to the needs of critical high-performance industries. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Best suited for environments with exposure to chlorides, acidic gases, or steam, where advanced corrosion resistance and heat performance are required. Uses • Protection of inner arcs of U-bend tubes in superheaters and reheaters exposed to flue gas turbulence • Installed in return bends of heat exchangers, condensers, and WHRBs where inner surfaces face scaling and erosion • Ideal for curved tube sections in petrochemical reactors, steam reformers, and coastal or offshore installations • Applied in high-temperature systems exposed to chloride-laden or acidic process gases • Used in chemical and fertilizer plants where welded tube bends are prone to localized corrosion Features • Superior corrosion resistance – Molybdenum content enhances resistance to pitting, crevice corrosion, and aggressive chemicals • Inner arc coverage – Designed specifically for areas affected by turbulence and localized heat attack • Excellent high-temperature performance – Maintains mechanical strength and oxidation resistance up to 870°C • Custom fitment – Precisely fabricated to match tube diameter and bend radius for secure installation • Versatile mounting – Installed using clamps, bands, or tack welding, without needing system disassembly • Long-term reliability – Reduces tube degradation, downtime, and maintenance in harsh service conditions Applications • power generation – Used in U-bend tubes of superheaters and economizers in chloride-containing flue gas environments • petrochemical industry – Shields tube bends in reformers and exchangers exposed to acidic gases and steam • waste heat recovery – Protects inner arcs of tube coils in WHRBs and HRSGs from scaling and corrosion • chemical processing – Ideal for tube protection in corrosive media with high moisture and heat • marine and coastal systems – Provides corrosion defense in return bends of heat exchangers exposed to salt-laden air Conclusion The SS 316 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance shielding solution for protecting the inner curvature of U-bend tubes exposed to heat and corrosive environments. With its molybdenum-enhanced resistance and precision engineering, this shield is ideal for applications requiring superior durability, thermal stability, and corrosion protection. For custom dimensions, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect heat exchanger, boiler, and superheater tubes from erosion, thermal scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical systems, and high-temperature industrial equipment where tubes are exposed to direct flame, turbulent gas flow, and particulate matter. Their half-round shape ensures easy installation over curved or straight tube surfaces, providing an effective layer of protection without the need for equipment disassembly. SS 310S U Type Inner Half Round Tube Shield The SS 310S U Type Inner Half Round Tube Shield is made from stainless steel grade 310S, a low-carbon variant of SS 310. It offers excellent resistance to oxidation and high-temperature corrosion while providing improved weldability and reduced risk of sensitization during thermal cycling. This inner U-type shield is specifically designed to cover the inside arc of U-bend tubes, an area commonly affected by accelerated wear due to turbulence, heat concentration, and gas flow deflection. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from erosion, slag buildup, and oxidation caused by high-velocity gas flow and thermal cycling. Ladhani Metal Corporation is a recognized manufacturer, supplier, and exporter of SS 310S U Type Inner Half Round Tube Shields, providing tailored solutions for heat-exposed systems in demanding industrial environments. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for oxidizing and high-temperature environments where welded structures are used and resistance to thermal fatigue is critical. Uses • Inner arc shielding for U-bend tubes in high-temperature boilers and superheaters • Installed in the return bends of HRSGs and waste heat recovery boilers (WHRBs) • Used in curved sections of heat exchangers exposed to combustion gases and fluctuating heat • Protects tube bends in petrochemical reactors, reformers, and process furnaces • Ideal for inner arc protection in high-temperature flue gas zones and incinerator coils Features • Excellent high-temperature oxidation resistance – Effective performance in environments up to 1050°C • Low carbon content – Reduces risk of intergranular corrosion after welding or extended service • Focused protection – Shields the inner bend surface most prone to gas turbulence and scaling • Accurate fitment – Custom-fabricated to match specific tube sizes and radii for optimal coverage • Fast installation – Can be securely mounted using stainless steel clamps, bands, or welds • Reliable performance – Enhances the lifespan of U-bend tubes and minimizes maintenance in heat-affected areas Applications • power plants – Used on U-bend inner surfaces in superheaters and reheaters to resist scale and corrosion • petrochemical industry – Shields inside tube arcs in reformers and exchangers exposed to hot process gases • waste heat systems – Protects internal tube bends in WHRBs and HRSGs from slag and thermal fatigue • chemical plants – Provides corrosion protection for return bends in reactors and condensers • high-temperature industrial units – Installed in curved tube coils subjected to flame exposure and oxidizing gases Conclusion The SS 310S U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable, high-temperature protective solution for shielding the inner arc of U-bend tubes. With its excellent oxidation resistance, low carbon content, and suitability for welded environments, this shield is ideal for critical systems operating under thermal stress and corrosive gas flow. For technical consultation, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated protective components used to extend the life of boiler, superheater, and heat exchanger tubes exposed to extreme heat, flue gas erosion, scaling, and corrosive environments. These shields are installed on curved or straight sections of tubes, helping to prevent mechanical wear and oxidation damage while ensuring reliable performance in thermal power, petrochemical, and industrial heat recovery systems. The half-round structure offers a secure fit and easy installation, eliminating the need for system disassembly. SS 310 U Type Inner Half Round Tube Shield The SS 310 U Type Inner Half Round Tube Shield is made from high-temperature austenitic stainless steel grade 310, which contains elevated levels of chromium and nickel. This alloy provides excellent resistance to oxidation, scaling, and thermal fatigue at service temperatures up to 1100°C. The inner U-type configuration is specifically designed to shield the inner curvature of U-bend tubes, which are susceptible to accelerated degradation due to turbulence, corrosive combustion gases, and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the inside arc of U-bend tubes, offering robust protection against turbulent flow erosion, slag buildup, and high-temperature scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 U Type Inner Half Round Tube Shields, offering custom-built solutions for high-temperature tube protection in demanding process and energy systems. Chemical Composition of SS 310 – Austenitic High-Temperature Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and oxidizing environments such as boilers, reformers, kilns, and heat exchangers where scaling, corrosion, and thermal stress are prevalent. Uses • Installed on inner arcs of U-bend tubes in power plant superheaters and reheaters exposed to extreme temperatures • Applied in return bends of steam reformers and heat exchangers handling oxidizing and acidic gases • Shields inner curves in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Used in chemical process units, incinerators, and high-temperature furnace systems • Suitable for curved tube coils in metallurgical, cement, and process gas heating applications Features • Excellent oxidation resistance – Performs at temperatures up to 1100°C without significant scaling • Inner arc protection – Guards against erosion and heat damage caused by turbulent flue gas flow • High structural stability – Maintains strength and surface integrity under thermal cycling and load conditions • Precision fit – Custom-engineered to match tube diameter and bend radius for secure, long-lasting placement • Easy installation – Can be attached using stainless bands, clamps, or tack welding methods • Extended service life – Minimizes tube replacement and reduces maintenance frequency in high-heat systems Applications • thermal and power plants – Protects U-bend tubes in superheaters from flame impingement and slag attack • petrochemical industries – Shields return bends in reformers and exchangers from high-temperature gas streams • waste heat recovery – Used in WHRBs and HRSGs to defend tube bends from scaling and erosion • high-temperature process plants – Provides inner arc coverage in systems handling oxidizing combustion byproducts • furnace systems – Installed in curved tube coils subjected to high radiant heat and thermal cycling Conclusion The SS 310 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance shielding solution for protecting the inner bend of tubes operating under intense heat and oxidation stress. Designed for precise fitment and long-term durability, this shield is ideal for boilers, reformers, and heat exchangers in power generation, petrochemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered protective components designed to safeguard heat exchanger, boiler, and superheater tubes from erosion, scaling, thermal stress, and corrosion. These shields are commonly applied in power generation, petrochemical, and high-temperature industrial systems where tube surfaces are subjected to flue gas turbulence, slag buildup, and elevated temperatures. Their half-round configuration ensures secure installation and reliable performance over curved or straight tube sections, extending equipment life and reducing maintenance costs. SS 304L U Type Inner Half Round Tube Shield The SS 304L U Type Inner Half Round Tube Shield is manufactured from stainless steel grade 304L, a low-carbon version of SS 304. It offers improved weldability and resistance to intergranular corrosion without sacrificing strength or oxidation resistance. The inner U-type design is specifically tailored to protect the inner arc of U-bend tubes, an area frequently exposed to turbulent flow, localized scaling, and corrosive gases that accelerate material degradation. • Inner U Type Half Round Tube Shield – Covers the inner curvature of U-bend tubes, shielding against erosion, scaling, and corrosion caused by turbulent gas flow and heat concentration. Ladhani Metal Corporation is a well-known manufacturer, supplier, and exporter of SS 304L U Type Inner Half Round Tube Shields, offering high-quality and custom-built protection for thermal and chemical process applications. Chemical Composition of SS 304L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 13.0% • Iron (Fe): Balance Applications: Best suited for environments requiring corrosion resistance and thermal stability, especially where welding is involved or where intergranular corrosion must be minimized. Uses • Inner bend protection in superheaters, reheaters, and economizer tubes exposed to flue gas turbulence • Installed in the return bends of waste heat recovery boilers (WHRBs) and HRSGs • Applied in curved tube sections of steam reformers and heat exchangers handling moderately corrosive gases • Used in condensers and evaporators in power and process plants • Ideal for environments where welded tube components are at risk of intergranular corrosion Features • Superior corrosion resistance – Excellent protection against oxidation and scaling in high-temperature service • Low carbon content – Reduces carbide precipitation during welding, minimizing risk of corrosion at weld zones • Inner arc shielding – Specifically designed to protect the internal arc of U-bends from erosion and thermal fatigue • Precision fabrication – Manufactured to fit the exact radius and diameter of the tube bend • Quick and easy installation – Mountable using clamps, stainless steel bands, or tack welding • Enhanced durability – Extends the life of tubes in cyclic and corrosive operating environments Applications • power plants – Protects inner U-bend surfaces in superheaters and heat recovery sections from slag and heat exposure • petrochemical industries – Shields internal arcs in process heaters and reactors operating with acidic gases • waste heat recovery – Prevents inner arc degradation in WHRBs and HRSGs under variable temperature loads • chemical plants – Installed in corrosive media systems where steam and acidic vapors cause wear • industrial heaters – Used in return bends subjected to thermal cycling and corrosive combustion products Conclusion The SS 304L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant solution for protecting the inner curvature of U-bend tubes in moderate to high-temperature environments. With its low-carbon composition and excellent thermal performance, it is ideal for systems requiring welded components and long-term durability in corrosive service conditions. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED