Mumbai
08048040025
Mumbai
08048040025
+919029362692
  Chat with us

Chat with us on WhatsApp

×
Home
products
Quote
Menu

SS 430 U Type Inner Half Round Tube Shield

U Type Inner Half Round Tube Shield

SS 430 U Type Inner Half Round Tube Shield

In stock•cod not available

Contact Us

Phone Number

Email Address ladhanimetal@gmail.com

Mon-Thu: 10 AM - 2 PM • Fri: 3 PM - 7AM

Other Website Visit our other website
Address 435, Pathe Bapurao Marg , Mumbai 400004 , INDIA

Mumbai, India, 400004

Description

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, and surface degradation in high-temperature and corrosive environments. These shields are used extensively in power plants, chemical processing units, and industrial heating systems. Their half-round construction enables fast and secure installation over both straight and curved tube surfaces, providing an effective barrier against damage from flue gas, slag, and particulate impact. SS 430 U Type Inner Half Round Tube Shield The SS 430 U Type Inner Half Round Tube Shield is manufactured from ferritic stainless steel grade 430, known for its good corrosion resistance, excellent thermal conductivity, and oxidation resistance. It performs reliably in moderate-temperature applications and provides dependable protection against scaling and surface deterioration. The inner U-type configuration is specifically engineered to cover the inside arc of U-bend tubes, which are particularly vulnerable to high-velocity gas flow and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes to guard against turbulence-driven erosion, slag buildup, and scaling in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 U Type Inner Half Round Tube Shields, offering reliable protection components for heat-exposed industrial systems. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and oxidizing environments where high thermal conductivity and scaling resistance are required, especially in non-welded systems. Uses • Installed on inner arc of U-bend tubes in boiler and superheater coils subject to flue gas turbulence • Protects return bends in WHRBs and HRSGs from surface degradation and slag impact • Used in heat exchangers and process heaters with moderate corrosion and temperature exposure • Applied in thermal processing plants, food-grade heating systems, and chemical units • Effective for curved coil protection in dryers, economizers, and incinerator heat recovery sections Features • Good corrosion and oxidation resistance – Performs well in moderately aggressive environments • Inner arc coverage – Specifically shields areas affected by heat, scale, and turbulent flow • Cost-effective – Offers a balance between performance and affordability for general-purpose applications • Thermal stability – Maintains structural integrity at service temperatures up to 815°C • Custom-fabricated – Tailored to match specific tube bend radius and outer diameter for secure fit • Easy installation – Compatible with clamp-on, banding, or weld-on mounting for fast and efficient assembly Applications • power generation – Used in superheater and economizer return bends to prevent scale and erosion • chemical and food industry – Applied in heat recovery systems requiring corrosion-resistant inner arc protection • waste heat recovery – Installed in WHRB and HRSG curved tubes to reduce slag and flue gas impact • dryers and kilns – Shields inner U-bend tubes in rotating or stationary heating equipment • process heating units – Provides mechanical and thermal protection for tubes exposed to oxidizing gas streams Conclusion The SS 430 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and economical solution for protecting the inner arcs of U-bend tubes in moderately corrosive and thermal environments. With its ferritic composition, good thermal performance, and ease of installation, it is ideal for general-purpose heat system applications. For technical assistance, customized dimensions, or quotations, please contact Ladhani Metal Corporation

Manufactured By Ladhani Metal Corporation
country of origin Made in India
material Stainless steel
grade SS 430
Configuration Inner U Type (designed to cover the internal curve of U-bend tubes)
Bend Radius Custom-matched to tube coil geometry
Length 50 mm to 1500 mm (or as per application)
Installation Weld-on, clamp-on, or banding methods available

Other Products

view all

68179d65be22ee500d53ff54 Card 2

product image
EN 10083-2 steel bars

EN 10083-2 C22E Steel Bars

EN 10083-2 C22E is a low carbon non-alloy steel grade designed for applications requiring good toughness, moderate strength, and excellent machinability. With a nominal carbon content of around 0.22% and controlled sulphur and phosphorus levels (E quality), C22E steel offers improved ductility and reliability compared to higher carbon grades. Supplied in bar form, EN 10083-2 C22E steel is widely used for general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C22E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C22E): • C – Carbon steel • 22 – Approx. 0.22% carbon content • E – Special quality steel with controlled phosphorus and sulphur content Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.24 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, normalized): • Tensile Strength: 430 – 560 MPa • Yield Strength: ≥ 275 MPa • Elongation: ≥ 20% • Hardness: 120 – 170 HB Key Features: • Low carbon steel with good toughness and ductility • Excellent machinability and formability • Suitable for surface hardening processes such as carburizing • Good weldability compared to medium and high carbon steels • Cost-effective material for general engineering applications Material Characteristics: EN 10083-2 C22E steel bar provides a balanced combination of strength, toughness, and machinability. Its low carbon content makes it easy to machine and form, while the controlled impurity levels ensure consistent performance and improved reliability in mechanically loaded components. Applications: • Shafts and pins • Bolts, studs, and fasteners • Bushes and sleeves • Forged and machined components • General engineering and structural parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C22E steel bars in various industrial bar forms with consistent quality and reliable performance. With good machinability, toughness, and versatility, C22E steel bars are a dependable choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

68179d65be22ee500d53ff54 Card 2

product image
EN 10083-2 steel bars

EN 10083-2 C60 Steel Bars

EN 10083-2 C60 is a high carbon non-alloy steel grade intended for applications that require very high strength, hardness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.60%, C60 steel offers superior mechanical performance compared to lower carbon grades and is suitable for components exposed to heavy loads and severe operating conditions. Supplied in bar form, EN 10083-2 C60 steel is widely used in demanding mechanical, automotive, and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C60 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C60): • C – Carbon steel • 60 – Approx. 0.60% carbon content Chemical Composition (% – typical limits): • Carbon (C): 0.57 – 0.65 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, normalized / quenched & tempered): • Tensile Strength: 750 – 900 MPa • Yield Strength: ≥ 400 MPa • Elongation: ≥ 9% • Hardness: 220 – 270 HB (can be significantly increased by heat treatment) Key Features: • High carbon steel with very high strength and hardness • Excellent response to quenching and tempering • Outstanding wear resistance for heavy-duty applications • Suitable for induction hardening and surface hardening • Cost-effective alternative to alloy steels in high-wear components Material Characteristics: EN 10083-2 C60 steel bar provides very high hardness, strength, and wear resistance due to its higher carbon content. It can be effectively heat treated to achieve high surface and core hardness, making it ideal for highly stressed and wear-prone components where durability and long service life are critical. Applications: • Shafts, axles, and crankshafts • Gears, cams, and rollers • Pins, keys, and couplings • Forged and machined components • Heavy-duty mechanical and industrial parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C60 steel bars in a wide range of industrial bar forms with consistent quality and reliable performance. With very high strength, excellent wear resistance, and superior heat-treatability, C60 steel bars are a dependable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

68179d65be22ee500d53ff54 Card 2

product image
EN 10083-2 steel bars

EN 10083-2 C55 Steel Bars

EN 10083-2 C55 is a high carbon non-alloy steel grade developed for applications that demand high strength, hardness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.55%, C55 steel offers superior mechanical performance compared to lower carbon grades and is suitable for components subjected to heavy loads and severe wear conditions. Supplied in bar form, EN 10083-2 C55 steel is commonly used in demanding mechanical and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C55 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C55): • C – Carbon steel • 55 – Approx. 0.55% carbon content Chemical Composition (% – typical limits): • Carbon (C): 0.52 – 0.60 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, normalized / quenched & tempered): • Tensile Strength: 700 – 850 MPa • Yield Strength: ≥ 380 MPa • Elongation: ≥ 10% • Hardness: 200 – 250 HB (can be significantly increased by heat treatment) Key Features: • High carbon steel with excellent strength and hardness • Outstanding response to quenching and tempering • Good wear resistance for heavy-duty applications • Suitable for induction hardening and surface hardening • Cost-effective alternative to alloy steels in wear-resistant components Material Characteristics: EN 10083-2 C55 steel bar delivers high hardness, strength, and wear resistance due to its higher carbon content. It can be heat treated to achieve very high surface and core hardness, making it ideal for highly stressed and wear-prone mechanical components where durability is critical. Applications: • Shafts, axles, and crankshafts • Gears, cams, and rollers • Pins, keys, and couplings • Forged and machined components • Heavy-duty mechanical and industrial parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C55 steel bars in a wide range of industrial bar forms with consistent quality and dependable performance. With high strength, excellent wear resistance, and superior heat-treatability, C55 steel bars are a reliable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar