Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

DIN 2628 Inconel flanges PN 250 are high-strength weld neck flanges manufactured in accordance with the DIN 2628 standard. Designed to operate in high-pressure systems up to 250 bar (3625 psi), these flanges offer outstanding performance in extreme environments involving high temperatures, corrosive chemicals, and mechanical stress. Made from Inconel superalloys, they provide excellent resistance to oxidation, thermal fatigue, and pitting, making them ideal for critical applications in demanding industries. Ladhani Metal Corporation is a globally trusted manufacturer and exporter of premium Inconel flanges. Our DIN 2628 PN 250 Inconel weld neck flanges are widely used in sectors such as chemical processing, offshore drilling, aerospace, power generation, and marine engineering. Known for precision engineering, reliability, and resistance to harsh service conditions, these flanges are a preferred choice in pressure-intensive and corrosion-prone systems. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure pipelines requiring superior sealing, thermal resistance, and structural integrity. Flange Type: • Weld Neck Flanges Designed with a tapered hub to reduce stress concentration at the weld point. Ideal for high-pressure and high-temperature environments. • Flat Face (FF) Flanges Flat face design ensures even gasket compression, preventing flange warping and providing secure sealing, especially when used with cast or brittle materials. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Excellent resistance to heat and corrosion by acids and chlorides. Commonly used in heat exchangers, reactors, and high-temperature furnace parts. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.50% • Silicon (Si): ≤ 0.50% Applications: Exceptional corrosion resistance in chloride-bearing environments. Ideal for offshore oil and gas, marine exhaust systems, and chemical plants. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.20 – 0.80% • Carbon (C): ≤ 0.08% Applications: A precipitation-hardened superalloy with outstanding strength, creep resistance, and corrosion resistance at temperatures up to 700°C. Widely used in aerospace turbine engines, nuclear reactors, and high-pressure chemical systems. Applications of DIN 2628 Inconel Flanges PN 250: • Chemical and Petrochemical Plants Ideal for piping systems exposed to aggressive chemicals, high pressures, and temperature fluctuations. • Power Generation Used in nuclear, thermal, and gas-fired power plants where heat and pressure resistance are critical. • Aerospace and Jet Engine Systems 718-grade flanges are suitable for turbine casings, fuel lines, and other high-temperature aircraft components. • Marine and Offshore Engineering Highly corrosion-resistant in saltwater environments, suitable for subsea manifolds, pipelines, and ballast systems. • Heat Treatment and Thermal Processing Used in furnaces, reactors, and pressure vessels subjected to rapid thermal cycling and oxidation. Key Features: • Manufactured according to DIN 2628 standards • PN 250 pressure rating for high-pressure system integrity • Weld neck design ensures optimal strength and flow performance • Available in Inconel 600, 625, and 718 grades • Flat face option for uniform sealing and safety in brittle systems • Excellent resistance to high temperatures, oxidation, and chlorides • Suitable for extreme chemical, thermal, and marine environments • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2628 Inconel Flanges PN 250 from Ladhani Metal Corporation offer the ideal solution for industries demanding high-performance materials under extreme conditions. With options in Inconel 600, 625, and 718, these weld neck flanges combine corrosion resistance, strength, and thermal stability for reliable operation across a wide range of high-pressure applications. Contact Ladhani Metal Corporation for detailed specifications, technical assistance, or to request a tailored quotation.

DIN 2576 Inconel Flanges PN 10 are high-performance, slip-on flanges engineered from nickel-chromium-based superalloys designed for use in corrosive and high-temperature industrial environments. Manufactured to the DIN 2576 standard, these flanges are well-suited for low to medium-pressure applications requiring exceptional resistance to oxidation, thermal stress, and chemical attack. The slip-on design allows the flange to slide over the pipe and be welded in place, providing accurate alignment and strong mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, offering precision-engineered components that meet international quality and dimensional standards. DIN 2576 Inconel flanges are ideal for challenging applications in aerospace, chemical processing, power generation, and marine systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for low to moderate pressure operations, delivering reliable sealing and long-term performance in fluid and gas transport systems. Flange Types: • Slip-On Flanges Designed to fit over the pipe and be welded on both sides, offering simplified installation and secure mechanical performance. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, providing uniform gasket compression and sealing integrity, especially with brittle or non-metallic components. Inconel Grades and Composition: Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Trace elements: Manganese, Silicon, Copper Applications: Inconel 600 offers excellent resistance to high-temperature oxidation, chloride-ion stress corrosion cracking, and acidic environments. Commonly used in furnace components, chemical process heaters, and nuclear reactors. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% Applications: Inconel 625 is known for its outstanding corrosion resistance in harsh conditions, including seawater, acid baths, and high-pressure environments. It is used extensively in marine hardware, offshore oil and gas systems, and aerospace exhaust systems. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti) + Aluminum (Al): ~1% Applications: Inconel 718 is a high-strength, precipitation-hardenable alloy with excellent corrosion and oxidation resistance. It performs well in cryogenic to high-temperature environments and is widely used in jet engines, high-temperature bolting, power generation turbines, and downhole oil and gas equipment. Applications of DIN 2576 Inconel Flanges: • Chemical and Petrochemical Processing Ideal for use in systems handling strong acids, solvents, and oxidizing agents at elevated temperatures. • Power Generation Used in heat exchangers, boiler systems, and turbine piping exposed to thermal cycling and steam corrosion. • Marine and Offshore Industries Excellent choice for seawater-cooled systems, marine risers, and subsea components due to its resistance to pitting and crevice corrosion. • Aerospace and Defense Applied in engine exhausts, combustion chambers, and other high-heat zones requiring structural integrity under extreme conditions. • Nuclear and High-Risk Industrial Systems Reliable in applications with radioactive or caustic media, where corrosion and temperature resistance are critical. Key Features: • Manufactured to DIN 2576 standard • PN 10 pressure rating suitable for moderate-pressure piping systems • Outstanding resistance to corrosion, oxidation, and high temperatures • Available in Inconel 600, 625, and other grades upon request • Slip-on design for ease of welding and proper pipe alignment • Flat face options for compatibility with a variety of gaskets and joint materials • Ideal for harsh chemical, thermal, and marine environments • Custom sizes, face types, and finishes available as per project requirements Conclusion: DIN 2576 Inconel Flanges PN 10 from Ladhani Metal Corporation are engineered for the toughest industrial environments, delivering performance, durability, and corrosion resistance where stainless steel or other materials may fail. For material selection support, technical data sheets, or customized orders, contact Ladhani Metal Corporation today.

DIN 2567 Inconel flanges PN 25 and PN 40 are high-performance threaded flanges manufactured from nickel-chromium-based superalloys designed to perform under extreme temperatures, high pressures, and aggressive chemical environments. Built to DIN 2567 standards, these flanges offer superior resistance to oxidation, corrosion, and thermal fatigue, making them ideal for applications in aerospace, power generation, chemical processing, and marine environments. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, delivering precision-engineered components with exceptional strength and metallurgical stability. The threaded design ensures easy, weld-free installation, making these flanges suitable for maintenance-driven or high-integrity systems. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for high-performance systems requiring chemical resistance and thermal stability. • PN 40 (40 bar / 580 psi): Engineered for high-pressure systems exposed to extreme conditions, offering outstanding mechanical integrity. Flange Types: • Threaded (Screwed) Flanges Allows easy installation and removal, especially in systems requiring regular maintenance. • Raised Face (RF) Flanges Enhances sealing performance under elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially when brittle or non-metallic components are involved. • Forged Threaded Flanges Provide superior strength, resistance to impact, and tight dimensional tolerances. • Custom-Machined Flanges Available in various sizes, pressure classes, and Inconel grades as per customer specifications. Available Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) o Composition:  Nickel (Ni): ≥ 72.0%  Chromium (Cr): 14.0 – 17.0%  Iron (Fe): 6.0 – 10.0%  Carbon (C): ≤ 0.15%  Manganese (Mn): ≤ 1.0%  Silicon (Si): ≤ 0.5% o Applications: Heat exchangers, furnace components, and systems exposed to high temperatures and oxidizing conditions. 2. Inconel 625 (UNS N06625) o Composition:  Nickel (Ni): 58.0 min  Chromium (Cr): 20.0 – 23.0%  Molybdenum (Mo): 8.0 – 10.0%  Niobium (Nb + Ta): 3.15 – 4.15%  Iron (Fe): ≤ 5.0%  Carbon (C): ≤ 0.10%  Manganese (Mn): ≤ 0.50%  Silicon (Si): ≤ 0.50% o Applications: Seawater systems, marine exhausts, chemical processing, and nuclear environments with high chloride exposure. 3. Inconel 718 (UNS N07718) o Composition:  Nickel (Ni): 50.0 – 55.0%  Chromium (Cr): 17.0 – 21.0%  Iron (Fe): Balance  Niobium + Tantalum (Nb + Ta): 4.75 – 5.50%  Molybdenum (Mo): 2.80 – 3.30%  Titanium (Ti): 0.65 – 1.15%  Aluminum (Al): 0.20 – 0.80%  Cobalt (Co): ≤ 1.0% o Applications: Aerospace engines, high-temperature bolts, nuclear reactors, and gas turbines where exceptional fatigue strength, creep resistance, and stability under extreme heat are required. Applications of DIN 2567 Inconel Flanges: • Aerospace Industry: Jet engines, gas turbines, and components requiring strength and heat resistance. • Chemical and Petrochemical Plants: For systems involving aggressive acids, solvents, or high-chloride environments. • Power Generation: Used in high-pressure steam lines, heat exchangers, and nuclear reactors. • Marine and Offshore: Performs reliably in seawater, brine, and corrosion-prone offshore structures. • Oil & Gas Industry: Suitable for sour gas service, downhole tubing, and high-pressure production lines. Key Features: • Conforms to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • Exceptional high-temperature strength and oxidation resistance • Superior resistance to pitting, crevice, and stress corrosion • High fatigue strength and excellent structural stability • Threaded design enables non-welded, easy assembly and maintenance • Supplied with test certificates, quality documentation, and full traceability Conclusion: DIN 2567 Inconel flanges PN 25 and PN 40 from Ladhani Metal Corporation are designed for the most extreme industrial conditions. Whether you're operating in aerospace, offshore, chemical, or power generation environments, these flanges provide unmatched performance, safety, and durability. For custom sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 Inconel flanges, engineered for high-performance, corrosion-resistant, and heat-resistant piping connections in low-pressure systems. These flanges are manufactured in accordance with DIN 2565 standards and are typically available with a PN 6 pressure rating, making them ideal for threaded piping connections where welding is not required. Inconel flanges are made from a family of nickel-chromium-based superalloys known for their excellent resistance to oxidation, high temperatures, and corrosive environments. They are especially suitable for critical applications in extreme operating conditions, including chemical processing, marine, aerospace, and high-temperature industrial systems. Flange Types: • Threaded (Screwed) Flanges: Allow for quick and easy installation without welding, suitable for systems requiring periodic disassembly. • Raised Face (RF) Flanges: Provides enhanced gasket compression, ensuring a tight and reliable seal in corrosive and high-temperature applications. • Flat Face (FF) Flanges: Commonly used in low-pressure piping systems, especially when paired with non-metallic gaskets. • Forged Threaded Flanges: Forging enhances mechanical strength and resistance to fatigue and stress. • Custom-Machined Flanges: Precision-machined to meet specific dimensional, material, and pressure requirements for specialized uses. Available Inconel Grades and Chemical Composition: 1. Inconel 600 (UNS N06600) o Nickel (Ni): ≥ 72.0% o Chromium (Cr): 14.0 – 17.0% o Iron (Fe): 6.0 – 10.0% Applications: Resistant to high temperatures and oxidizing environments; ideal for furnace components, chemical processing, and heat exchangers. 2. Inconel 625 (UNS N06625) o Nickel (Ni): ≥ 58.0% o Chromium (Cr): 20.0 – 23.0% o Molybdenum (Mo): 8.0 – 10.0% o Niobium (Nb): 3.15 – 4.15% Applications: Offers outstanding fatigue strength and chloride corrosion resistance; used in marine systems, nuclear reactors, and aerospace components. Applications of DIN 2565 Inconel Flanges: • Chemical Processing: Excellent resistance to a wide range of corrosive chemicals and high-temperature oxidation. • Marine and Offshore: Withstands saltwater corrosion and extreme marine conditions. • Power and Heat Generation: Suitable for high-temperature boiler systems and superheaters. • Aerospace Industry: Ideal for jet engines, turbine components, and exhaust systems. • Nuclear and Defense: Used in systems exposed to radiation, high pressure, and corrosive environments. Key Features: • Manufactured in compliance with DIN 2565 specifications and PN 6 pressure rating • Excellent resistance to oxidation, carburization, and chloride stress corrosion • High mechanical strength at elevated temperatures • Non-magnetic and corrosion-resistant in both oxidizing and reducing environments • Supplied with complete material traceability, test certificates, and quality assurance documents Conclusion: DIN 2565 Inconel flanges from Ladhani Metal Corporation are engineered to meet the highest standards of performance, durability, and corrosion resistance. Ideal for demanding industries where reliability under extreme conditions is essential, these flanges deliver long-term performance and safety. Backed by stringent quality control and precision manufacturing, our Inconel flanges are a trusted choice for critical applications worldwide. For technical details, pricing information, or to place a bulk order, contact Ladhani Metal Corporation today.

DIN 2544 Inconel flanges are flanges manufactured according to the DIN 2544 standard, specifically designed for use with Inconel alloys. Inconel is a family of high-performance nickel-chromium-based superalloys that are known for their exceptional strength and resistance to high temperatures and corrosion. These flanges are primarily used in industries that involve extreme conditions such as aerospace, chemical processing, and high-temperature applications. Ladhani Metal Corporation is a prominent supplier and distributor of high-quality industrial products, including DIN 2544 Inconel flanges. The company specializes in offering a wide range of flanges, fittings, and pipes made from high-performance materials such as Inconel, duplex stainless steel, and other super alloys. Key Features: Material: Inconel alloys (typically Inconel 600, 625, or 718). Pressure Rating (PN 25): These flanges are rated for pressure class PN 25, meaning they can handle pressures up to 25 bar (2500 kPa). High Temperature Resistance: Inconel alloys are well-suited for high-temperature environments, maintaining strength and stability even at temperatures above 1000°C (1832°F). Corrosion Resistance: Inconel offers superior resistance to oxidation, corrosion, and carburization, particularly in high-temperature environments, making them ideal for harsh industrial conditions. Strength: Known for excellent mechanical properties, Inconel alloys retain high tensile and creep-rupture strength even under extreme temperatures. Types of DIN 2544 Inconel Flanges: Weld Neck Flange (WN): Used for high-pressure and high-temperature applications, where a strong, leak-proof joint is essential. Slip-On Flange (SO): Easy to install, these flanges slide over the pipe and are welded both inside and outside. Blind Flange (BL): Used to seal the ends of pipes, vessels, or openings. Threaded Flange (TH): These are screwed onto the pipe without welding, making them easier to remove. Socket Weld Flange (SW): Designed for smaller pipe sizes, where the pipe is inserted into the socket and welded in place. Grades of Inconel: Inconel 600: Contains 72% nickel, 14-17% chromium, and 6-10% iron. It offers excellent resistance to oxidation and carburization at high temperatures, making it ideal for applications in furnace components, heat exchangers, and chemical processing. Inconel 625: A nickel-chromium alloy with added molybdenum and niobium for increased strength and corrosion resistance in marine and chemical environments. It is highly resistant to both oxidation and carburization. Inconel 718: A precipitation-hardenable superalloy with high yield, tensile, and creep-rupture properties at temperatures up to 700°C (1292°F). It is widely used in aerospace, gas turbines, and high-performance engines. Pressure Rating (PN 25): PN 25 means the flange is rated for pressure up to 25 bar (2500 kPa), making it suitable for moderate to high-pressure applications. Summary: DIN 2544 Inconel flanges are robust, high-performance components made from Inconel alloys, designed for use in extremely high-temperature and corrosive environments. They come in various types, These flanges offer excellent resistance to oxidation, corrosion, and high temperatures, making them ideal for demanding applications in aerospace, chemical processing, and high-temperature industries. PN 25 flanges are rated for pressures up to 25 bar.

Product Name: Titanium Plate Standard: ASTM B265 Material: GR1, GR2, Gr3,Gr4 GR5, GR7, GR12,GR23 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting ASTM B265 covers annealed titanium and titanium alloy strips, sheets and plates. ASTM B265 Ti and Ti-based alloy plates are widely used in equipment for high-temperature environment, including aircraft equipment, petroleum and petrochemical, biological materials, marine and chemical industries, such as: blades, storage tanks, targets, pipes and heat exchanger equipment. Product Titanium sheet Standard ASTM B265 Material GR1, GR2, GR3,GR4 GR5, GR7, GR12,GR23 Surface Pickling, Polishing, Sand blasting etc. Application Industry Size The size of standard sheet is usually Thickness × Width 1000mm × Length 2000mm. We can also cut it as you require. Type Sheet, plate, foil; Straight & roll Certificate Certificate of Origin, Material Test Certificate as per EN10204.3.1 and 10204.3.2 are all available

Product Name: Titanium racks Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished

Product Name: Titanium Welding Wire Standard: AWS A5.16 Material: ERTi-2 Unit Price: $25usd/kg-$60usd/kg Diameter: 0.8mm/1mm/1.2mm/1.6mm/2mm/2.4mm/3mm/3.2mm etc. Surface: Bright