Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler tubes, superheaters, and heat exchanger coils from erosion, corrosion, scaling, and ash deposition. These shields are widely used in thermal power stations, steam generation units, and waste heat recovery systems to prolong tube life and maintain energy efficiency. Their semi-cylindrical shape enables secure coverage of curved or straight tube surfaces, particularly in high-wear and abrasive flow regions. SS 316L Half Round Tube Shield for LTSH Tube The SS 316L Half Round Tube Shield is manufactured using low-carbon austenitic stainless steel grade 316L, known for its excellent resistance to chloride-induced corrosion, pitting, and crevice attack. Its lower carbon content minimizes the risk of carbide precipitation during welding, making it highly suitable for environments with frequent thermal cycling and corrosive gas exposure. Specifically designed for Low Temperature Superheater (LTSH) applications, this shield safeguards boiler tubes from soot erosion, acidic flue gases, and surface degradation. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L Half Round Tube Shields for LTSH systems, delivering corrosion-resistant, durable, and performance-oriented solutions tailored to thermal protection needs. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Designed for LTSH and low-temperature convection zones exposed to acidic gas environments, moisture, or chlorides, where enhanced corrosion resistance is required. Uses • Installed on LTSH tube surfaces in utility boilers to guard against flue gas corrosion and thermal wear • Shields tubes in HRSGs, economizers, and convection coil banks exposed to ash-laden gas flow • Used in waste heat recovery units operating with corrosive fuel byproducts • Ideal for process boilers in coastal, marine, or high-humidity environments • Protects tube surfaces in low to moderate heat applications where weldability is a concern Features • Excellent corrosion resistance – Resists chloride, acidic gas, and flue-induced degradation • Enhanced weldability – Low carbon content minimizes sensitization during installation • Precision fabrication – Custom-sized to match LTSH tube geometry and coil configuration • Quick installation – Compatible with clamp-on, tack weld, or banding methods • Reduced maintenance – Extends tube service life in flue gas zones, minimizing replacement costs • Available in varied thicknesses and lengths per system specifications Applications • thermal power plants – Shields LTSH tubes from moisture corrosion and fly ash erosion • chemical and refinery boilers – Protects superheater coils exposed to process gases and acidic residues • waste heat recovery – Installed in WHRBs to protect low-temperature return bends and convection sections • steam generation systems – Guards against corrosion in zones with flue gas condensation • marine and coastal facilities – Effective in chloride-laden environments requiring enhanced protection Conclusion The SS 316L Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-quality protection for boiler and superheater tubes in corrosive, low-temperature applications. With outstanding corrosion resistance and excellent performance under thermal stress, it ensures long-term durability and minimal maintenance in critical energy systems. For custom sizes, material consultation, or pricing details, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger, boiler, and superheater tubes from erosion, scaling, slag deposition, and corrosion under high-temperature operating conditions. These shields are widely used in industries such as power generation, petrochemical processing, waste heat recovery, and chemical manufacturing. Their half-round structure allows for quick installation over curved or straight tube sections, providing dependable protection and extending equipment lifespan without requiring major disassembly. SS 316L U Type Inner Half Round Tube Shield The SS 316L U Type Inner Half Round Tube Shield is fabricated from low-carbon austenitic stainless steel grade 316L. It offers superior corrosion resistance, particularly in chloride-rich or acidic environments, and improved weldability with reduced risk of intergranular corrosion after welding. The inner U-type configuration is specifically engineered to shield the inner arc of U-bend tubes—an area highly vulnerable to turbulence-induced erosion, scaling, and thermal fatigue. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from flue gas turbulence, localized corrosion, and heat-induced scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316L U Type Inner Half Round Tube Shields, providing durable and customizable shielding solutions for demanding thermal and corrosive applications. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for welded systems and high-temperature environments exposed to chlorides, acidic gases, or steam, where resistance to corrosion and thermal degradation is essential. Uses • Shields inner arcs of U-bend tubes in boilers, superheaters, and reheaters operating in corrosive and high-heat zones • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs subjected to scaling and slag formation • Used in curved tube sections of steam reformers, condensers, and marine heat exchangers • Applied in chemical and fertilizer plants with exposure to acidic, chloride-rich, or humid gases • Suitable for welded assemblies where protection against intergranular corrosion is necessary Features • Excellent corrosion resistance – Enhanced performance in acidic, chloride-laden, and high-moisture environments • Low carbon content – Minimizes risk of intergranular corrosion after welding or high-temperature service • Inner bend protection – Shields areas affected by turbulence, localized heat, and erosion • High-temperature durability – Performs reliably in oxidizing environments up to 870°C • Custom fabrication – Tailored to match specific tube diameters and bend radii for a secure, gap-free fit • Easy installation – Suitable for clamp-on, banding, or weld-on mounting without requiring full system disassembly Applications • power generation – Inner U-type shields for protecting boiler and economizer bends in thermal power stations • petrochemical facilities – Guards internal tube bends exposed to chlorides and hot process gases in reformers • waste heat recovery systems – Applied to WHRBs and HRSGs for inner arc protection from flue gas scaling • chemical processing units – Used in reactors and exchanger coils to resist chemical and thermal corrosion • marine and offshore systems – Ensures long-term durability of U-bends exposed to saltwater-laden environments Conclusion The SS 316L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant protective component designed for inner arc shielding in U-bend tubes operating under harsh thermal and chemical conditions. With its superior weldability, resistance to pitting, and high-temperature strength, it is ideal for critical service in energy, chemical, and marine applications. For technical support, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-designed components used to protect boiler, superheater, and heat exchanger tubes from erosion, slag accumulation, scaling, and high-temperature oxidation. These shields are essential for industrial systems exposed to intense thermal cycling, high-velocity flue gases, and corrosive atmospheres. Their half-round form ensures quick and secure installation over curved or straight tube surfaces, significantly enhancing tube durability and reducing downtime. 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield is made from a high-performance austenitic stainless steel alloy containing 20% chromium, 14% nickel, and approximately 2% silicon. This alloy provides excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue, especially in oxidizing and carburizing environments. The outer U-type design is specifically intended to protect the outer arc of U-bend tubes in boilers, reformers, and heat exchangers, where flame, gas flow, and slag buildup cause the most wear. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes from flame impingement, gas erosion, slag attack, and thermal scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Outer Half Round Tube Shields, offering custom-built shielding solutions for critical high-temperature and industrial systems. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing environments in power generation, chemical processing, and furnace systems where excellent thermal and scaling resistance are required. Uses • Outer arc protection for U-bend tubes in superheaters and reheaters in thermal power plants • Shields return bends in heat exchangers and steam reformers exposed to hot gases and flame • Used in waste heat recovery boilers (WHRBs) and HRSGs to prevent surface oxidation and slag damage • Suitable for petrochemical and chemical reactors operating under oxidizing or mildly carburizing conditions • Applied in high-temperature industrial furnaces, incinerators, and reforming equipment Features • Excellent high-temperature resistance – Withstands service temperatures up to 1100°C with minimal deformation or scaling • Oxidation and corrosion resistance – High Cr-Ni-Si composition forms a stable oxide layer for prolonged exposure protection • Outer bend coverage – Provides critical protection for the most exposed and erosion-prone section of U-bend tubes • Custom fabrication – Manufactured to match exact tube radius and diameter, ensuring a precise and stable fit • Easy installation – Secured with clamps, tack welds, or stainless steel banding without disassembly • Long-lasting performance – Enhances operational life and minimizes costly tube replacements in aggressive environments Applications • thermal and power generation – Protects outer U-bend tube surfaces from slag, soot, and flue gas corrosion • petrochemical and refining – Shields return bends in reformers and heaters exposed to oxidizing and sulfur-rich gases • waste heat recovery – Guards outer tube arcs in WHRBs and HRSGs against scaling and erosion • metallurgy and cement processing – Used in high-temperature pipelines and ducts in furnaces and kilns • process heating systems – Ideal for environments involving intense flame exposure and cyclic thermal loads Conclusion The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a highly durable, heat-resistant shielding solution for protecting U-bend tube outer surfaces in extreme industrial environments. With superior resistance to oxidation, scaling, and thermal fatigue, it ensures long-term reliability and efficiency in power plants, reformers, and furnace systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

DIN 2634 titanium flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium titanium grades, offering exceptional corrosion resistance, low density, and outstanding mechanical strength even in the most demanding environments. Their lightweight yet highly durable nature makes them ideal for aggressive service conditions where conventional metal flanges may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Titanium Grades and Typical Composition: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in seawater service, chemical processing, and marine equipment where high corrosion resistance in oxidizing environments is required. Titanium Grade 5 (Ti-6Al-4V / UNS R56400) – Alloyed Titanium • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Used in high-strength and high-temperature applications, including aerospace systems, pressure vessels, and heat exchangers due to its superior strength-to-weight ratio and fatigue resistance. Applications of DIN 2634 Titanium Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater and brine solutions while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as chlorine, acids, and alkalis at elevated pressures. • Desalination Plants Performs exceptionally in salt-laden and high-pressure water processing systems. • Aerospace and Defense Equipment Used in high-performance fluid systems requiring lightweight and high-strength components. • Pharmaceutical and Medical Systems Applied in ultra-clean and sterile environments where corrosion-free operation is essential. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Lightweight construction reduces system weight without compromising strength • Exceptional resistance to corrosion, erosion, and high-temperature oxidation • Weld neck configuration ensures strong, vibration-resistant joints • Available in commercially pure and alloyed titanium grades • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 titanium flanges PN 25 from Ladhani Metal Corporation are engineered to perform in extreme conditions where high pressure, aggressive media, and corrosion resistance are critical. With superior mechanical strength and long-term durability, these titanium flanges are ideal for advanced applications in marine, chemical, aerospace, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 super duplex steel flanges PN 16 are high-performance weld neck flanges manufactured in accordance with the DIN 2633 standard. Engineered for medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are made from super duplex stainless steels, which offer a superior combination of high mechanical strength and outstanding corrosion resistance. They are specifically designed for critical applications in aggressive environments where standard stainless or duplex steels may not provide sufficient durability. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of super duplex steel flanges, known for precision manufacturing, strict quality control, and compliance with international material and dimensional standards. Each flange is tested for performance, safety, and resistance to harsh operating conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for systems requiring secure, corrosion-resistant, and high-strength connections under moderate pressure. Flange Type: • Weld Neck Flanges Featuring a long tapered hub, these flanges offer optimal stress distribution, reduce turbulence at the joint, and ensure reliable pipe alignment in high-stress environments. • Flat Face (FF) Flanges Designed for uniform gasket compression, particularly effective when used with soft gaskets or cast iron mating components. Super Duplex Steel Grades and Full Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Ideal for offshore platforms, subsea systems, desalination plants, chemical process systems, and high-chloride environments requiring superior corrosion and pitting resistance. Super Duplex S32760 • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Commonly used in seawater systems, heat exchangers, fire-fighting systems, and oil & gas equipment due to excellent resistance to erosion, stress corrosion cracking, and fatigue. Applications of DIN 2633 Super Duplex Steel Flanges PN 16: • Offshore Oil and Gas Platforms Resists chloride-induced corrosion and high mechanical loads in topside and subsea installations. • Desalination and Marine Systems Performs well in high-salinity environments where other alloys may suffer from pitting or crevice corrosion. • Chemical and Petrochemical Plants Suitable for handling strong acids, caustic solutions, and oxidizing environments at elevated temperatures and pressures. • Fire Protection and Water Injection Systems Ensures reliability and corrosion resistance in safety-critical and high-pressure fluid delivery systems. • Pulp and Paper Industry Used in bleach plant systems and recovery boilers where exposure to corrosive agents is routine. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for medium-pressure service • Weld neck design ensures secure, vibration-resistant connections • Available in high-strength super duplex grades S32750 and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength and fatigue resistance • Custom sizes, coatings, and pressure classes available upon request Conclusion: DIN 2633 super duplex steel flanges PN 16 from Ladhani Metal Corporation are designed to meet the most demanding operational requirements in highly corrosive and high-pressure environments. With unmatched strength and corrosion resistance, these flanges are ideal for offshore, marine, chemical, and industrial applications. For technical specifications, custom designs, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 duplex steel flanges PN 16 are precision-manufactured weld neck flanges designed according to the DIN 2633 standard, ideal for medium-pressure piping systems operating up to 16 bar (232 psi). These flanges are crafted from duplex stainless steels that combine the benefits of austenitic and ferritic microstructures, offering excellent mechanical strength, superior resistance to stress corrosion cracking, and enhanced durability in aggressive chemical and chloride-containing environments. They are ideal for applications where both corrosion resistance and high strength are essential. Ladhani Metal Corporation is a leading global manufacturer and supplier of duplex steel flanges, recognized for high-quality production, dimensional accuracy, and strict compliance with international standards. All flanges undergo rigorous inspection and testing to ensure reliable performance in challenging industrial conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure pipelines requiring corrosion resistance and increased mechanical integrity. Flange Type: • Weld Neck Flanges These flanges feature a long tapered hub for improved flow characteristics and reduced mechanical stress at the weld area, ensuring stable and secure connections. • Flat Face (FF) Flanges Designed to provide a consistent sealing surface, especially effective when used with soft gaskets or when connecting to cast components. Duplex Steel Grades and Full Composition: Duplex 2205 (UNS S31803/S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.03% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Widely used in desalination plants, chemical process vessels, marine environments, and pulp and paper industries due to high strength and resistance to localized corrosion. Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Preferred in highly corrosive offshore, oil and gas, chemical, and high-chloride environments where superior strength and corrosion resistance are essential. Applications of DIN 2633 Duplex Steel Flanges PN 16: • Chemical and Petrochemical Plants Provides strong and corrosion-resistant connections for chemical reactors, storage tanks, and acid-handling systems. • Marine and Offshore Engineering Suitable for submerged systems, seawater cooling, and ballast water piping due to excellent resistance to chloride-induced corrosion. • Pulp and Paper Industry Performs reliably in bleaching and chemical recovery processes where both chemical resistance and strength are required. • Desalination and Water Treatment Ideal for high-salinity water systems and reverse osmosis pipelines requiring durable, corrosion-resistant components. • Oil and Gas Refineries Used in pipelines, pressure vessels, and heat exchangers subjected to sour gas and high-pressure operating environments. Key Features: • Manufactured to DIN 2633 standard • PN 16 pressure class for medium-pressure service • Weld neck configuration supports vibration resistance and proper alignment • Available in Duplex 2205 and Super Duplex 2507 grades • High resistance to stress corrosion cracking, pitting, and crevice corrosion • Excellent mechanical strength and fatigue resistance • Custom sizes, finishes, and specifications available upon request Conclusion: DIN 2633 duplex steel flanges PN 16 from Ladhani Metal Corporation offer an optimal combination of strength, corrosion resistance, and reliability for use in harsh industrial conditions. With high-performance duplex and super duplex materials, these flanges are the preferred choice for applications in chemical processing, offshore platforms, and desalination plants. For detailed technical support, customized configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2633 Inconel flanges PN 16 are precision-engineered weld neck flanges manufactured to the DIN 2633 standard, specifically designed for use in high-temperature and highly corrosive industrial environments. These flanges offer secure, pressure-resistant connections for pipeline systems operating at up to 16 bar (232 psi). Fabricated from premium Inconel alloys such as 600, 625, and 718, they provide excellent resistance to oxidation, thermal stress, and corrosive chemicals, making them ideal for extreme service conditions across various industries. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Inconel flanges, known for its commitment to material integrity, precision engineering, and strict compliance with international quality standards. Each flange is subjected to thorough inspections to meet performance, safety, and durability expectations. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for high-performance pipeline systems requiring resistance to thermal cycling, corrosion, and pressure fluctuation. Flange Type: • Weld Neck Flanges Long tapered hub design ensures smooth fluid transitions and reduces mechanical stress at the base, offering strong and vibration-resistant joints. • Flat Face (FF) Flanges Promotes even gasket loading and is compatible with soft or cast-mating components, enhancing sealing efficiency and system longevity. Inconel Grades and Full Composition: Inconel 600 • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% • Sulfur (S): ≤ 0.015% Applications: Ideal for high-temperature furnace components, chemical processing, and food equipment exposed to acidic and alkaline environments. Inconel 625 • Nickel (Ni): 58.0% min • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Suitable for seawater systems, offshore oil and gas equipment, aerospace ducting, and high-strength chemical processing. Inconel 718 • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% • Carbon (C): ≤ 0.08% Applications: Extensively used in aerospace engines, turbine components, cryogenic storage tanks, and high-strength fasteners due to excellent fatigue, creep, and rupture resistance. Applications of DIN 2633 Inconel Flanges PN 16: • Petrochemical and Refining Industries Withstands exposure to high-temperature hydrocarbons, acids, and corrosive gases. • Marine and Offshore Installations Corrosion-resistant in saltwater and high-pressure environments, ideal for subsea and topside systems. • Aerospace and Power Generation Used in turbine and exhaust systems where strength retention at elevated temperatures is critical. • Chemical Processing Plants Stable under acidic, oxidizing, and reducing agents in continuous and batch processing systems. • Heat Exchangers and Reactors Reliable performance in thermal cycling and aggressive fluid handling applications. Key Features: • Designed in accordance with DIN 2633 specifications • Rated PN 16 for secure medium-pressure operation • Weld neck design improves alignment and minimizes mechanical stress • Available in Inconel grades 600, 625, and 718 • Exceptional resistance to high-temperature oxidation and corrosion • High tensile strength and fatigue resistance under mechanical loads • Tailored dimensions, surface finishes, and specifications available upon request Conclusion: DIN 2633 Inconel Flanges PN 16 from Ladhani Metal Corporation are engineered to meet the toughest demands of modern industry. Offering excellent resistance to high-temperature and corrosive environments, these flanges made from Inconel 600, 625, and 718 are ideal for critical applications across aerospace, petrochemical, marine, and power generation sectors. For detailed product options, technical support, or a customized quote, contact Ladhani Metal Corporation today.

DIN 2633 Monel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. Designed for pipeline systems operating at pressures up to 16 bar (232 psi), these flanges provide exceptional resistance to corrosive environments, including seawater, acids, and alkalis. Manufactured from high-performance Monel alloys such as Monel 400 and Monel K500, they combine outstanding mechanical strength with excellent corrosion resistance, making them suitable for demanding industrial and marine applications. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for superior material quality, dimensional accuracy, and strict compliance with international standards. Each flange undergoes rigorous quality checks and testing to ensure consistent performance in critical service conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring corrosion resistance and structural reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure smooth flow transitions, proper pipe alignment, and minimized stress concentration for high-integrity connections. • Flat Face (FF) Flanges Provides a uniform sealing surface ideal for systems with soft gasket materials or cast mating components, ensuring optimal gasket compression. Monel Grades and Full Composition: Monel 400 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Widely used in marine engineering, chemical processing, pump and valve components, and environments exposed to hydrofluoric and sulfuric acids. Monel K500 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Suitable for high-strength applications in marine, oil and gas, and sour gas service environments. Offers improved mechanical properties over Monel 400 while retaining excellent corrosion resistance. Applications of DIN 2633 Monel Flanges PN 16: • Marine and Offshore Systems Ideal for saltwater piping, desalination systems, and submerged components due to excellent resistance to chloride stress corrosion. • Chemical Processing Industries Used in systems handling strong acids, alkalis, and organic solvents, especially hydrofluoric acid. • Oil and Gas Exploration Resistant to sour gas environments, high pressures, and corrosive drilling fluids. • Heat Exchangers and Condensers Monel flanges are preferred for their stability under fluctuating thermal loads and corrosive fluids. • Power Generation Used in cooling water and fuel handling systems where reliability under stress and corrosion is essential. Key Features: • Manufactured to DIN 2633 specifications • PN 16 rating for medium-pressure pipelines • Weld neck design for stress-distributed, leak-proof connections • Available in Monel 400 and K500 grades for tailored performance • Excellent resistance to corrosion in marine, acidic, and alkaline environments • High tensile strength and resistance to mechanical fatigue • Custom sizes, pressure classes, and finishes available on request Conclusion: DIN 2633 Monel Flanges PN 16 from Ladhani Metal Corporation offer robust performance in highly corrosive and pressure-sensitive applications. With superior resistance to seawater, acids, and harsh industrial chemicals, these flanges are engineered for longevity and strength in marine, chemical, and oil and gas systems. For custom configurations, technical advice, or pricing details, contact Ladhani Metal Corporation today.