Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect boiler coils, heat exchanger tubes, and superheaters from erosion, scaling, slag deposition, and high-temperature damage. These shields are used extensively in thermal power plants, waste heat recovery systems, and process industries to extend tube life, reduce maintenance costs, and maintain thermal efficiency. Their semi-cylindrical design allows for easy and secure installation over straight or curved tube surfaces. 1Cr13 U Type Inner Half Round Tube Shield The 1Cr13 U Type Inner Half Round Tube Shield is fabricated from martensitic stainless steel 1Cr13, offering good mechanical strength, moderate corrosion resistance, and excellent wear resistance. This grade performs well in thermal systems subject to moderate chemical exposure and mechanical erosion. The inner U-type configuration is engineered to shield the inner arc of U-bend tubes, where turbulent flow, thermal cycling, and slag buildup are most intense and damaging. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, protecting against erosion, slag impact, and thermal degradation in high-flow areas. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr13 U Type Inner Half Round Tube Shields, offering durable and cost-effective solutions for general-purpose heat protection in industrial systems. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and abrasive environments with thermal exposure, where strength and erosion resistance are required. Uses • Installed on the inner arc of U-bend tubes in boilers and reheaters to resist erosion from flue gas flow • Shields inner bends in WHRBs and HRSGs subjected to scale buildup and thermal fatigue • Applied in curved tube sections of heat exchangers and evaporators operating under fluctuating temperatures • Used in process industries for protection against moderate corrosion and mechanical wear • Ideal for thermal units in power, petrochemical, and refining applications Features • Good wear and erosion resistance – Suitable for high-velocity gas flow zones • Inner arc protection – Shields critical U-bend areas where slag, turbulence, and thermal load are most severe • Moderate corrosion resistance – Performs well in mildly aggressive gas environments • Tailored fit – Custom-fabricated to match tube size and bend radius for precise protection • Easy installation – Compatible with clamp-on, weld-on, or banding methods • Cost-effective – An economical solution for routine protection of thermal system tube bends Applications • power generation – Inner U-bend protection in superheaters and economizers facing gas flow and scaling • waste heat recovery – Used in WHRBs to protect return bends from erosion and thermal damage • petrochemical processing – Applied in internal bends of steam reformers and exchangers • chemical industry – Suitable for use in reactors and thermal units operating under moderate heat and chemical exposure • industrial furnaces – Protects tube bends from slag deposits and temperature fluctuations Conclusion The 1Cr13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for U-bend tubes exposed to moderate thermal and erosive conditions. With its martensitic strength, wear resistance, and affordable performance, it is well-suited for a wide range of thermal and industrial process applications. For custom sizes, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.

DIN 2544 Carbon Steel flanges are flanges manufactured according to the DIN 2544 standard, specifically designed for use with carbon steel pipes. Carbon steel is a commonly used material in the manufacturing of flanges due to its strength, durability, and cost-effectiveness. These flanges are widely used in various industries such as oil and gas, chemical processing, power plants, and water treatment, where high strength and reliability are required in medium to high-pressure systems. Key Features: Material: Carbon steel (typically grades like ASTM A105, A350 LF2, and A234 WPB). Pressure Rating (PN 25): These flanges are rated for pressure class PN 25, meaning they can withstand pressures up to 25 bar (2500 kPa). Strength: Carbon steel flanges are known for their high tensile strength, making them suitable for high-pressure applications. Durability: Carbon steel flanges are durable and can withstand harsh operating conditions, such as high temperatures and mechanical stresses. Cost-Effective: Compared to other materials, carbon steel flanges are more affordable, offering a balance between strength, performance, and cost. Types of DIN 2544 Carbon Steel Flanges: Weld Neck Flange (WN): These flanges are used in high-pressure applications where a strong, leak-proof connection is necessary. The flange neck is welded to the pipe, ensuring a secure and reliable joint. Slip-On Flange (SO): These flanges are easy to install by slipping them over the pipe and welding both inside and outside. They are commonly used in low to medium-pressure applications. Blind Flange (BL): These flanges are used to close the ends of pipes, vessels, or other openings, providing a secure seal. Threaded Flange (TH): These flanges are screwed onto the pipe, which eliminates the need for welding. They are ideal for applications where welding is not feasible. Socket Weld Flange (SW): These flanges are designed for smaller pipe sizes, where the pipe is inserted into the socket and welded into place for a secure joint. Grades of Carbon Steel: ASTM A105: A common grade of carbon steel used in flanges, ideal for low- to medium-pressure applications in the oil, gas, and petrochemical industries. It contains approximately 0.35% carbon (C), 0.60-0.90% manganese (Mn), 0.03% phosphorus (P), 0.05% sulfur (S), with the balance being iron (Fe). ASTM A350 LF2: A low-temperature carbon steel that is commonly used in the construction of flanges for applications in low-temperature environments. it includes around 0.30% carbon (C), 1.00-1.50% manganese (Mn), 0.03% phosphorus (P), 0.03% sulfur (S), with the balance being iron (Fe). A234 WPB: A material used for manufacturing carbon steel flanges in piping systems, particularly for use in high-temperature and high-pressure systems.the composition typically consists of 0.30% carbon (C), 1.00-1.20% manganese (Mn), 0.03% phosphorus (P), 0.03% sulfur (S), and the balance being iron (Fe). Pressure Rating (PN 25): PN 25 means the flange is rated to withstand pressures of up to 25 bar (2500 kPa), making it suitable for moderate to high-pressure applications. Summary: DIN 2544 Carbon Steel flanges are strong, durable, and cost-effective components used in various industries, including oil and gas, chemical processing, and power plants. Ladhani Metal Corporation offers a wide variety of carbon steel flanges, including weld neck, slip-on, blind, threaded, and socket weld types, with pressure ratings up to PN 25.

LADHANI METAL CORPORATION In order to fulfill the more specified and increasing demands of our clients, we are offering a collective range of Super Duplex Elbolet. The offered range of products is specially designed keeping petrochemical, chemical, pharmaceutical, beverage and hydraulic industries requirements in mind. Along with this, these products are manufactured using advanced machinery and cutting edge technology in strict conformation with industry established standards and norms. Offered products are highly demanded for their dimensional accuracy, rigid construction and corrosion resistance. Range: 15 NB up to 100 NB 3000 LBS & 6000, 6 NB unto 600 NB (Weldolet / Sweepolet) SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS. Specifications: Size: 1/2"NB to 24"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS & required schedule Type: Socket Weld (S/W) & screwed (SCRD) - NPT, BSP, BSPT,

LADHANI METAL CORPORATION In order to fulfill the more specified and increasing demands of our clients, we are offering a collective range of Super Duplex Elbolet. The offered range of products is specially designed keeping petrochemical, chemical, pharmaceutical, beverage and hydraulic industries requirements in mind. Along with this, these products are manufactured using advanced machinery and cutting edge technology in strict conformation with industry established standards and norms. Offered products are highly demanded for their dimensional accuracy, rigid construction and corrosion resistance. Range: 15 NB up to 100 NB 3000 LBS & 6000, 6 NB unto 600 NB (Weldolet / Sweepolet) SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS. Specifications: Size: 1/2"NB to 24"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS & required schedule Type: Socket Weld (S/W) & screwed (SCRD) - NPT, BSP, BSPT,

LADHANI METAL CORPORATION In order to fulfill the more specified and increasing demands of our clients, we are offering a collective range of Super Duplex Elbolet. The offered range of products is specially designed keeping petrochemical, chemical, pharmaceutical, beverage and hydraulic industries requirements in mind. Along with this, these products are manufactured using advanced machinery and cutting edge technology in strict conformation with industry established standards and norms. Offered products are highly demanded for their dimensional accuracy, rigid construction and corrosion resistance. Range: 15 NB up to 100 NB 3000 LBS & 6000, 6 NB unto 600 NB (Weldolet / Sweepolet) SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS. Specifications: Size: 1/2"NB to 24"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS & required schedule Type: Socket Weld (S/W) & screwed (SCRD) - NPT, BSP, BSPT,

LADHANI METAL CORPORATION In order to fulfill the more specified and increasing demands of our clients, we are offering a collective range of Super Duplex Elbolet. The offered range of products is specially designed keeping petrochemical, chemical, pharmaceutical, beverage and hydraulic industries requirements in mind. Along with this, these products are manufactured using advanced machinery and cutting edge technology in strict conformation with industry established standards and norms. Offered products are highly demanded for their dimensional accuracy, rigid construction and corrosion resistance. Range: 15 NB up to 100 NB 3000 LBS & 6000, 6 NB unto 600 NB (Weldolet / Sweepolet) SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS. Specifications: Size: 1/2"NB to 24"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS & required schedule Type: Socket Weld (S/W) & screwed (SCRD) - NPT, BSP, BSPT,

LADHANI METAL CORPORATION In order to fulfill the more specified and increasing demands of our clients, we are offering a collective range of Super Duplex Elbolet. The offered range of products is specially designed keeping petrochemical, chemical, pharmaceutical, beverage and hydraulic industries requirements in mind. Along with this, these products are manufactured using advanced machinery and cutting edge technology in strict conformation with industry established standards and norms. Offered products are highly demanded for their dimensional accuracy, rigid construction and corrosion resistance. Range: 15 NB up to 100 NB 3000 LBS & 6000, 6 NB unto 600 NB (Weldolet / Sweepolet) SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS. Specifications: Size: 1/2"NB to 24"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS & required schedule Type: Socket Weld (S/W) & screwed (SCRD) - NPT, BSP, BSPT,