Contact us for Your requirement.
Or Visit www.ladhanimetal.com , www.ladhanimetal.in , www.ladhanimetals.com
List Of Specs Available for Molybdenum . :
|
JIS G 4103 - Nickel Chromium Molybdenum Steels |
|
SAE AMS6410 - STEEL Nickel Chromium Molybdenum |
|
ASTM UOP391-09 - Trace Metals in Organics by AAS |
|
JIS G 4202 - Aluminium Chromium Molybdenum Steels |
|
HN 1387 - COLLOIDAL MOLYBDENUM DISULPHIDE ADDITIVE |
|
ASTM E174 - Method of Test for Osygen in Molybdenum |
|
ASTM UOP303-19 - Impurities in Catalysts by ICP-OES |
|
HN 1739 - ASSEMBLY PASTE - 50% MOLYBDENUM DISULPHIDE |
|
9985997 - GREASE, MOLYBDENUM DISULFIDE MULTI-PURPOSE |
|
ASTM UOP1005-14 - Trace Metals in Organics by ICP-MS |
|
ASTM UOP389-10 - Trace Metals in Organics by ICP-OES |
|
ASTM UOP389-15 - Trace Metals in Organics by ICP-OES |
|
ASTM UOP389-14 - Trace Metals in Organics by ICP-OES |
|
MIL-S-20146 - STEEL,CHROMIUM-MOLYBDENUM-ALLOY,WROUGHT |
|
9985612 - GREASE, SYNTHETIC WITH MOLYBDENUM DISULFIDE |
|
HN 1329 - MOLYBDENUM DISULPHIDE AIR - DRYING COMPOUND |
|
MIL-R-45449 - MOLYBDENUM, UNALLOYED, BARS, RODS, SHEET |
|
MIL-T-20155 - TUBING, STEEL, ALLOY MOLYBDENUM, SEAMLESS |
|
HN 1416 - GREASE - LITHIUM SOAP
- MOLYBDENUM DISULPHATE |
|
ASTM UOP715-85 - Rhenium Catalysts by Spectrophotometry |
|
SAE AMS7805 - MOLYBDENUM BARS ARC CAST, STRESS
RELIEVED |
|
NAVY 47-S-14 - STEEL, CHROME-MOLYBDENUM, SHEET OR STRIP |
|
HN 2299 - OIL ASSEMBLY,
CONTAINING MOLYBDENUM DISULPHIDE |
|
ASTM D3372 - Standard Test Method
for Molybdenum in Water |
|
MIL-DTL-25681 - LUBRICANT, MOLYBDENUM DISULFIDE,
SILICONE |
|
MIL-S-15464 - STEEL, ALLOY, CHROMIUM-MOLYBDENUM; CASTINGS |
|
HN 1190 - GREASE - MOLYBDENUM DISULPHIDE/ GRAPHITE
GREASE |
|
ASTM STP656 - INTERGRANULAR CORROSION OF STAINLESS ALLOYS |
|
MIL-T-6734 - TUBING;CHROME-NICKEL-MOLYBDENUM STEEL WELDED |
|
MIL-M-48146 - MOLYBDENUM TRIOXIDE (FOR USE IN
AMMUNITION) |
|
ASTM DS70 - Handbook of Steel Data: American and European |
|
MIL-S-81242 - STEEL, CHROME-MOLYBDENUM (4130 OR 8630) BARS |
|
MIL-T-6731 - TUBING; CHROME-MOLYBDENUM (4130) STEEL WELLED |
|
ASTM UOP389-86 - Trace Metals in Oils by Wet Ash / ICP—AES |
|
FORD WSE-M1A324-A1 - VALVE INSERT - MO-CR-V-CO-NI-FE ALLOY |
|
HN 1331 - LUBRICANT - BONDED MOLYBDENUM DISULPHIDE DRY
FILM |
|
ASTM F681 - Standard Practice for Use of Branch Connections |
|
1 Scope This specification is inactive with no replacement. |
|
ASTM UOP714-07 - Metals in Miscellaneous Samples by ICP-OES |
|
ASTM D3372-12 - Standard Test Method
for Molybdenum in Water |
|
ASTM D3372-17 - Standard Test Method
for Molybdenum in Water |
|
ASTM D3372-02 - Standard Test Method
for Molybdenum in Water |
|
MIL-C-85455 - CHROMIUM-MOLYBDENUM PLATING
(ELECTRODEPOSITED) |
|
ASTM A156 - Specification for Molybdenum Salts
and Compounds |
|
MIL-L-24478 - LUBRICANT, MOLYBDENUM DISULFIDE IN
ISOPROPANOL |
|
ASTM A600 - Standard Specification for Tool Steel High
Speed |
|
SAE AMS7807 - MOLYBDENUM FORGINGS, ARC CAST, STRESS
RELIEVED |
|
JIS M 8131 - Methods for Determination
of Molybdenum in Ores |
|
MIL-N-3182 - NICKEL-MOLYBDENUM ALLOY STEEL FORGINGS AND
BARS |
|
FORD U-MC002-8011 - LUBRICANT, CONVEYOR, AMBIENT TEMPERATURE |
|
BS 2S 120 - 2 1/2 Per Cent Nickel-
Chromium-Molybdenum Steel |
|
ISO 16968 - Solid biofuels - Determination of minor elements |
|
ASTM A209 - SEAMLESS CARBON - MOLYBDENUM ALLOY -
STEEL BOILER |
|
GME QK 001188 - Polyamide 66 Modified
with Molybdenum Sulfide |
|
MIL-N-18088 - NICKEL-MOLYBDENUM-CHROMIUM ALLOY PLATES, SHEETS |
|
CSA Z310.5 - CAST COBALT - CHROMIUM MOLYBDENUM BASE
ALLOY FOR |
|
ASTM UOP961-12 - Elemental Composition of Zeolites by
ICP-OES |
|
ASTM A144-04(2019) - Standard Specification for
Ferrotungsten |
|
ASTM A324-08(2019) - Standard Specification for
Ferrotitanium |
|
DELPHI DX280098 - LUBRICANT, GRAPHITE FILLED, LOW-TEMPERATURE |
|
ASTM A144-04(2014) - Standard Specification for
Ferrotungsten |
|
ASTM A250 - ELECTRIC-RESISTANCE-WELDED
CARBON-MOLYBDENUM ALLOY |
|
MIL-S-8695 - STEEL, BARS AND WIRE, MOLYBDENUM (4037)
(AIRCRAFT |
|
MIL-M-7866 - MOLYBDENUM DISULFIDE, TECHNICAL,
LUBRICATION GRADE |
|
HN 1185 - OIL - SUSPENSION - MOLYBDENUM DISULPHIDE
IMPREGNATING |
|
MIL-S-81081 - STEEL: SHEET, CHROMIUM-NICKEL-MOLYBDENUM-VANADIUM |
|
MIL-T-18165 - TUBE AND PIPE, CHROMIUM
- MOLYBDENUM ALLOY STEEL, |
|
MIL-S-8690 - STEEL, CHROME-NICKEL-MOLYBDENUM,8620,BARS AIRCRAFT |
|
JIS G 3221 - CHROMIUM MOLYBDENUM STEEL FORGINGS FOR
GENERAL USE |
|
ASTM UOP389-04 - Trace Metals in Oils by Wet Ashing and
ICP-OES |
|
ASTM A132-04(2019) - Standard Specification for
Ferromolybdenum |
|
GMP.PA66.059 - Nylon 66 - 2.5% MoS2 Lubricated, Heat Stabilized |
|
ASTM B564-22 - Standard Specification for Nickel Alloy
Forgings |
|
ASTM A132-04(2014) - Standard Specification for
Ferromolybdenum |
|
ASTM A132-04(2009) - Standard Specification for
Ferromolybdenum |
|
ASTM A146 - Standard Specification
for Molybdenum Oxide Products |
|
MIL-S-62470 - STEEL, CHROME-NICKEL-MOLYBDENUM, 8620, BARS, FORGI |
|
HN 1587 - MOLYBDENUM DISULPHIDE GREASE - CLAY
THICKENED MATERIAL |
|
MIL-DTL-32286 - MATERIAL, BALL VALVE SEAT SEAL AND THRUST WASHER |
|
HN 2262 - CALCIUM GREASE, NLGI NO. 2,
WITH MOLYBDENUM DISULPHIDE |
|
CSA ISO 16968 - Solid biofuels - Determination of minor elements |
|
HN 1332 - LUBRICANT - BONDED MOLYBDENUM DISULPHIDE
SURFACE FINISH |
|
ASTM UOP274-94 - Platinum in Fresh Catalysts by
Spectrophotometry |
|
ASTM UOP407-09 - Trace Metals in Organics by Dry Ashing -
ICP-OES |
|
ASTM UOP389-09 - Trace Metals in Organics by Wet Ashing -
ICP-OES |
|
ASTM B561-94(2018) - Standard Specification for Refined
Platinum |
|
ASTM B335 - Standard Specification for
Nickel-Molybdenum Alloy Rod |
|
ASTM D3372-92(1996) - Standard Test Method
for Molybdenum in Water |
|
JIS H 1404 - Methods for chemical analysis
of molybdenum materials |
|
MIL-C-24615 - CASTINGS, NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM
ALLOY |
|
MS 39348 - RING, PISTON, MOLYBDENUM FACING: ENGINE TOP
COMPRESSION |
|
9985486 - COATING -
PHOSPHATE/MOLYBDENUM DISULPHIDE/PHENOLIC RESIN |
|
MIL-P-24691/2 - PIPE AND TUBE, CHROMIUM-MOLYBDENUM STEEL,
SEAMLESS |
|
FORD U-MC002-8005 - LUBRICANT - CONVEYOR HIGH TEMP NON
CARBONISING |
|
DELPHI DX300095 - NYLON 66 - 2.5% MOS2 LUBRICATED, HEAT
STABILIZED |
|
BS 3127 - Specification for Ferrous and non-ferrous Bourdon
tubing |
|
ASTM UOP389-09a - Trace Metals in Organics by Wet Ashing -
ICP-OES |
|
ASTM A146-04 - Standard Specification
for Molybdenum Oxide Products |
|
SAE AMS-M-7866 - Molybdenum Disulfide, Technical,
Lubrication Grade |
|
ASTM B977 - Standard Specification for Titanium and
Titanium Ingots |
|
JIS H 4482 - Molybdenum Rods for Lighting and
Electronic Equipments |
|
ASTM D3372-02(2007)e1 - Standard Test Method for Molybdenum in
Water |
|
JIS H 4481 - Molybdenum Wires for Lighting and
Electronic Equipments |
|
MIL-T-6733 - TUBING, CHROME NICKEL MOLYBDENUM (8735)
STEEL STAINLESS |
|
ASTM F681-82(2014) - Standard Practice for Use of Branch
Connections |
|
ASTM F681-82(2004) - Standard Practice for Use of Branch
Connections |
|
ASTM F681-82(1998) - Standard Practice for Use of Branch
Connections |
|
ASTM F681-82(2018) - Standard Practice for Use of Branch
Connections |
|
JIS H 1280 - Method for determination of molybdenum in
nickel alloys |
|
ASTM F681-82(2008) - Standard Practice for Use of Branch
Connections |
|
ASTM F541-12(2020) - Standard Specification for Alloy Steel
Eyebolts |
|
ASTM E315 - Standard Test Methods for Chemical Analysis
of Molybdenum |
|
ASTM B335-98 - Standard Specification for Nickel-Molybdenum Alloy
Rod |
|
ASTM B335-03 - Standard Specification for
Nickel-Molybdenum Alloy Rod |
|
JIS H 4483 - Molybdenum Sheets for Lighting and
Electronic Equipments |
|
MIL-T-6732 - TUBING, CHROME-NICKEL-MOLYBDENUM (8630),
STEEL, SEAMLESS |
|
ASTM A597/A597M-14(2020) - Standard Specification for Cast
Tool Steel |
|
ASTM E396-17 - Standard Test Methods for Chemical Analysis
of Cadmium |
|
SAE AMS7813 - MOLYBDENUM ALLOY BARS, 0.5TI, ARC CAST,
STRESS RELIEVED |
|
ASTM E396-12 - Standard Test Methods for Chemical Analysis
of Cadmium |
|
ASTM A483/A483M-10(2020) - Standard Specification for
Silicomanganese |
|
ASTM E396-05 - Standard Test Methods for Chemical Analysis
of Cadmium |
|
ASTM E396-04 - Standard Test Methods for Chemical Analysis
of Cadmium |
|
ASTM E396-98 - Standard Test Methods for Chemical Analysis
of Cadmium |
|
ASTM A483/A483M-10(2015) - Standard Specification for
Silicomanganese |
|
ASTM B848-10 - Specification for Powder Forged (P/F)
Ferrous Materials |
|
ASTM B848-05 - Specification for Powder Forged (P/F) Ferrous
Materials |
|
ASTM A600-92a(2016) - Standard Specification for Tool Steel
High Speed |
|
FORD FLTM AJ 150-02 - MOLYBDENUM DISULFIDE AND
POLYETHYLENE IN GREASES |
|
FORD FLTM AJ 005-01 - DETERMINATION
OF MOLYBDENUM DISULFIDE IN GREASES |
|
ASTM A600-92a(2010) - Standard Specification for Tool Steel
High Speed |
|
ASTM B977-13 - Standard Specification for Titanium and
Titanium Ingots |
|
ASTM A600-92a(2004) - Standard Specification for Tool Steel
High Speed |
|
ASTM B977-11 - Standard Specification for Titanium and
Titanium Ingots |
|
ASTM A600-92a(1999) - Standard Specification for Tool Steel
High Speed |
|
ASTM C560-20 - Standard Test Methods for Chemical Analysis
of Graphite |
|
ASTM C560-15 - Standard Test Methods for Chemical Analysis
of Graphite |
|
JIS G 3222 - NICKEL CHROMIUM MOLYBDENUM STEEL FORGINGS
FOR GENERAL USE |
|
ASTM A494 - Standard Specification for Nickel and Nickel
Alloy Castings |
|
ASTM B863 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM STP1591 - Modularity and Tapers in Total Joint Replacement
Devices |
|
FORD U-MA003-8517 - CAST IRON - ALLOY - MEDIUM AND HIGH
PRODUCTION DIES |
|
ASTM E396-12e1 - Standard Test Methods for Chemical
Analysis of Cadmium |
|
ASTM A992/A992M-20 - Standard Specification for Structural
Steel Shapes |
|
ASTM UOP927-92 - Trace Metallic Impurities in Fresh
Catalysts by ICP-AES |
|
ASTM C560-15e1 - Standard Test Methods for Chemical
Analysis of Graphite |
|
AN-QQ-S-685 - STEEL; CHROME-MOLYBDENUM (X 4130), PLATE,
SHEET, AND STRIP |
|
MIL-PRF-83483 - ANTISEIZE THREAD
COMPOUND, MOLYBDENUM DISULFIDEPETROLATUM |
|
ASTM A146-64(2000) - Standard Specification
for Molybdenum Oxide Products |
|
ASTM A146-04(2014) - Standard Specification
for Molybdenum Oxide Products |
|
ASTM A146-04(2009) - Standard Specification
for Molybdenum Oxide Products |
|
ASTM A146-04(2019) - Standard Specification
for Molybdenum Oxide Products |
|
ASTM F49 - Standard Specification
for Molybdenum Strip for Electron Tubes |
|
SAE AMS7801 - MOLYBDENUM SHEET, STRIP AND PLATE ARC
CAST, STRESS RELIEVED |
|
ASTM A482/A482M-11(2021) - Standard Specification for
Ferrochrome-Silicon |
|
ASTM A492-95(2019) - Standard Specification for Stainless
Steel Rope Wire |
|
ASTM A482/A482M-11(2016) - Standard Specification for
Ferrochrome-Silicon |
|
9985861 - Grease, Molybdenum Disulfide Containing,
Initial Engine Assembly |
|
NAVISTAR MPAPS BT-49 - Determination
Of Molybdenum Disulfide In Lubricants |
|
ASTM B863-19 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-06 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-05 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
FORD FLTM EU AJ 005-01 - DETERMINATION
OF MOLYBDENUM DISULPHIDE IN GREASES |
|
AFNOR NF A32-501 - FOUNDRY PRODUCTS,
SILICON MOLYBDENUM FERRITIC CAST IRON |
|
FORD FLTM EU-AJ 005-01 - DETERMINATION OF MOLYBDENUM DISULPHIDE
IN GREASES |
|
ASTM B863-14 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-03 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-02 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-13 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-12 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-10 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-09 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-08 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM A131/A131M-19 - Standard Specification for Structural
Steel for Ships |
|
ASTM A391/A391M-21 - Standard Specification for Grade 80
Alloy Steel Chain |
|
ISO 3907 - Hardmetals - Determination of total carbon -
Gravimetric method |
|
ASTM D2218-67(2019) - Standard Specification for Molybdate
Orange Pigments |
|
ASTM A131/A131M-14 - Standard Specification for Structural
Steel for Ships |
|
ASTM A131/A131M-13 - Standard Specification for Structural
Steel for Ships |
|
GMW18206 - Grease, Molybdenum Disulfide Containing,
Initial Engine Assembly |
|
ASTM B335-03(2008) - Standard Specification for
Nickel-Molybdenum Alloy Rod |
|
ASTM B335-03(2013) - Standard Specification for
Nickel-Molybdenum Alloy Rod |
|
ASTM B335-03(2018) - Standard Specification for
Nickel-Molybdenum Alloy Rod |
|
ASTM B848 - Standard Specification for Powder Forged (PF)
Ferrous Materials |
|
ASTM B381 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B863-13a - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-08a - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-06a - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B863-99a - Standard Specification for Titanium and
Titanium Alloy Wire |
|
ASTM B367 - Standard Specification for Titanium and
Titanium Alloy Castings |
|
ASTM B668-05 - Standard Specification for UNS N08028
Seamless Pipe and Tube |
|
ASTM A255-20 - Standard Test Methods for Determining
Hardenability of Steel |
|
ASTM A313/A313M-18 - Standard Specification for Stainless
Steel Spring Wire |
|
FORD ESE-M1P71-A - MOLYBDENUM & NICKEL, CHROMIUM
ALLOY FACING - CO-DEPOSITED |
|
ASTM A1025-02 - Standard Specification for Ferroalloys,
General Requirements |
|
ASTM B863-05e1 - Standard Specification for Titanium and
Titanium Alloy Wire |
|
QPL-15716 - ELECTRODES, WELDING,
COVERED, MOLYBDENUM ALLOY STEEL APPLICATION |
|
GMP.PA66.028 - Nylon 66 - MoS2, Lubricated, Impact Modified,
Heat Stabilized |
|
ASTM A255-20a - Standard Test Methods for Determining
Hardenability of Steel |
|
SAE AMS-S-18728 - Steel Plate, Sheet and Strip, Alloy 8630,
Aircraft Quality |
|
ASTM C560-88(2005) - Standard Test Methods for Chemical
Analysis of Graphite |
|
ASTM C560-88(1998) - Standard Test Methods for Chemical
Analysis of Graphite |
|
ASTM STP503 - Elevated Temperature Static Properties of
Wrought Carbon Steel |
|
ASTM B364-18 - Standard Specification for Tantalum and
Tantalum Alloy Ingots |
|
SAE AMS-S-8690 - Steel, Chrome-Nickel-Molybdenum, 8620, Bars
Aircraft Quality |
|
MIL-E-15716 - ELECTRODE, WELDING,
COVERED, MOLYBDENUM ALLOY STEEL APPLICATION |
|
ASTM UOP836-82 - Sulfur in Distillate and Residual Oils by
X-Ray Fluorescence |
|
MIL-T-6735 - TUBING, CHROME-MOLYBDENUM, A135 STEEL, SEAMLESS
AIRCRAFT QUALITY |
|
SAE AMS-S-18729 - Steel Plate, Sheet, and Strip, Alloy 4130,
Aircraft Quality |
|
ASTM A159-83(2020) - Standard Specification for Automotive
Gray Iron Castings |
|
ASTM A436-84(2020) - Standard Specification for Austenitic
Gray Iron Castings |
|
ASTM E315-88(1999) - Standard Test Methods for Chemical
Analysis of Molybdenum |
|
ASTM A494/A494M - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM B848-15 - Standard Specification for Powder Forged (PF)
Ferrous Materials |
|
ASTM B862 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B381-06 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-05 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-03 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-02 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
SAE AMS7806 - MOLYBDENUM FORGINGS POWDER METALLURGY,
SINTERED, STRESS RELIEVED |
|
ASTM B381-00 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-21 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-10 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-09 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-08 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-13 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B367-22 - Standard Specification for Titanium and
Titanium Alloy Castings |
|
ASTM A788-03 - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM A788-02 - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM C560-88(2005)e1 - Standard Test Methods for Chemical
Analysis of Graphite |
|
ASTM A788-04 - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM B367-13 - Standard Specification for Titanium and
Titanium Alloy Castings |
|
ASTM F1431-92(2021) - Standard Specification for Water Trap
for Diesel Exhaust |
|
ASTM B977/B977M - Standard Specification for Titanium and
Titanium Alloy Ingots |
|
ASTM B384 - STANDARD SPECIFICATION
FOR MOLYBDENUM AND MOLYBDENUM ALLOY FORGINGS |
|
ASTM A332 - Specification for
Nickel-Chromium-Molybdenum Steel Bars for Springs |
|
ASTM D3974 - Standard Practices for Extraction of Trace
Elements from Sediments |
|
IPC-CF-152 - Composite Metallic Material Specification for
Printed Wiring Board |
|
ASTM B381-08a - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
ASTM B381-06a - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
BS T 76 - Specification for Chromium-molybdenum steel tube
(770 MPa) (Weldable) |
|
ASTM A788-04a - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM A788-03a - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM A788-98a - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM A756-17 - Standard Specification for Stainless
Anti-Friction Bearing Steel |
|
ASTM B861 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
NAVISTAR CEMS BT-49 - VOID - Determination
Of Molybdenum Disulfide In Lubricants |
|
ASTM B381-05e1 - Standard Specification for Titanium and
Titanium Alloy Forgings |
|
MIL-E-22200/7 - ELECTRODES, WELDING,
COVERED, MOLYBDENUM ALLOY STEEL APPLICATION |
|
ASTM D7126 - Standard Test Method for On-Line Colorimetric
Measurement of Silica |
|
ASTM B408-06 - Standard Specification for
Nickel-Iron-Chromium Alloy Rod and Bar |
|
ASTM E371-99 - Standard Test Method for the Determination
of Boron in Ferroboron |
|
9985547 - Lubricant, Dry Film, Iron Manganese Phosphate
and Molybdenum Disulfide |
|
ASTM B883-19 - Standard Specification for Metal Injection
Molded (MIM) Materials |
|
SAE AMS7821 - MOLYBDENUM ALLOY FORGINGS, 0.5TI-0.08ZR,
ARC CAST, STRESS RELIEVED |
|
BS HC 7 - Specification for 3% Chromium-Molybdenum Steel
Castings (880-1080 Mpa) |
|
MIL-N-24687 - MICKEL-CHROMIUM-MOLYBDENUM-IRON-COLUMBIUM ALLOY
BARS, AND FORGINGS |
|
ASTM A788-02e1 - Standard Specification for Steel Forgings,
General Requirements |
|
ASTM B883-17 - Standard Specification for Metal Injection
Molded (MIM) Materials |
|
ASTM B883-15 - Standard Specification for Metal Injection
Molded (MIM) Materials |
|
DS/EN ISO 3907 - Hardmetals - Determination of total carbon -
Gravimetric method |
|
ASTM B289 - Tentative Specification
for MOLYBDENUM WIRE UNDER 20 MILS IN DIAMETER |
|
SAE AMS-T-6735 - Tubing, Chrome-Molybdenum, 4135 Steel, Seamless
Aircraft Quality |
|
ASTM A494/A494M-17 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-15 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-14 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-22 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-13 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM E351-13 - Standard Test Methods for Chemical Analysis
of Cast Iron—All Types |
|
ASTM A494/A494M-12 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-09 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-08 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-18 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-07 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-05 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-04 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-03 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-01 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-00 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM E351-18 - Standard Test Methods for Chemical Analysis
of Cast Iron—All Types |
|
ASTM B862-06 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-05 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-19 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-02 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-99 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-01 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-14 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B668-05(2010) - Standard Specification for UNS N08028
Seamless Pipe and Tube |
|
ASTM B862-13 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-08 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
SAE AMS-S-5000 - Steel, Chrome-Nickel-Molybdenum (E4340)
Bars and Reforging Stock |
|
MIL-DTL-24528 - STEEL BARS AND FORGINGS,
CHROMIUM-NICKEL- MOLYBDENUM (UNS G43406) |
|
MIL-T-6736 - TUBING, CHROME-MOLYBDENUM, (4130 OR 8630) STEEL,
SEAMLESS AND WELDED |
|
ASTM A255-10(2018) - Standard Test Methods for Determining
Hardenability of Steel |
|
ASTM A255-10(2014) - Standard Test Methods for Determining
Hardenability of Steel |
|
ASTM B862-09 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B515-22 - Standard Specification for Welded
Nickel-Iron-Chromium Alloy Tubes |
|
FORD WSD-M1P84-A2 - COATING – MOLYBDENUM ***TO BE USED
WITH FORD WSS-M99P1111-A*** |
|
JIS Z 3223 - Covered electrodes for molybdenum steel
and chromium molybdenum steel |
|
ASTM A494/A494M-14a - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-18a - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-17a - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM B977/B977M-19 - Standard Specification for Titanium
and Titanium Alloy Ingots |
|
ASTM A494/A494M-03a - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A494/A494M-01a - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM A332-56 - Specification for
Nickel-Chromium-Molybdenum Steel Bars for Springs |
|
ASTM UOP823-90 - Platinum in Fresh Platinum-Rhenium
Catalysts by Spectrophotometry |
|
ASTM D3974-09 - Standard Practices for Extraction of Trace
Elements from Sediments |
|
ASTM B862-06b - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B862-06a - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
FORD M1C179-A - GREASE - HEAVY DUTY MILL ***TO BE USED WITH FORD
WSS-M99P1111-A*** |
|
ASTM B862-08a - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
MS 14296 - BAR, METAL, FLAT, ALLOY STEEL 4130
CHROME MOLYBDENUM (AIRCRAFT QUALITY) |
|
ASTM B463-21 - Standard Specification for UNS N08020 Alloy
Plate, Sheet, and Strip |
|
ASTM A554-21 - Standard Specification for Welded Stainless
Steel Mechanical Tubing |
|
ASTM B862-13a - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM B464/B464M-15(2020) - Standard Specification for
Welded UNS N08020 Alloy Pipe |
|
ASTM B621-21 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy Rod |
|
ASTM F364 - Standard Specification for Molybdenum Flattened
Wire for Electron Tubes |
|
ASTM B348 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM A494/A494M-09e1 - Standard Specification for Castings,
Nickel and Nickel Alloy |
|
ASTM B861-19 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-06 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-05 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-03 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-02 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-14 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-13 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-01 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-00 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-10 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-09 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-08 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B862-05e1 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
ASTM D7126-15 - Standard Test Method for On-Line
Colorimetric Measurement of Silica |
|
JIS H 4471 - Tungsten-Molybdenum Alloy Wires for Lighting
and Electronic Equipments |
|
MS 14294 - BAR, METAL, ROUND, ALLOY STEEL 4130
CHROME-MOLYBDENUM (AIRCRAFT QUALITY) |
|
ASTM D7126-10 - Standard Test Method for On-Line
Colorimetric Measurement of Silica |
|
ASTM D7126-06 - Standard Test Method for On-Line
Colorimetric Measurement of Silica |
|
ASTM B662 - Standard Specification for Silver-Molybdenum Electrical
Contact Material |
|
SAE AMS-T-6736 - Tubing, Chrome-Molybdenum (4130 or 8630)
Steel, Seamless and Welded |
|
JIS G 4109 - Chromium-molybdenum alloy steel plates for
boilers and pressure vessels |
|
ASTM B848/B848M-21 - Standard Specification for Powder
Forged (PF) Ferrous Materials |
|
ASTM A494/A494M-03ae1 - Standard Specification for
Castings, Nickel and Nickel Alloy |
|
ASTM A494/A494M-01ae1 - Standard Specification for
Castings, Nickel and Nickel Alloy |
|
ASTM B381-13(2019) - Standard Specification for Titanium
and Titanium Alloy Forgings |
|
ASTM B861-08a - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ASTM B861-06a - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
SAE AMS2261 - Tolerances Nickel, Nickel Alloy, and Cobalt Alloy
Bars, Rods, and Wire |
|
ASTM B862-06be1 - Standard Specification for Titanium and
Titanium Alloy Welded Pipe |
|
SAE AMS7811 - MOLYBDENUM ALLOY SHEET, STRIP, PLATE,
0.5TI, ARC CAST, STRESS RELIEVED |
|
BS HC 8 - Specification for 3 % chromium-molybdenum steel
castings (1150 - 1300 MPa) |
|
MS 14297 - BAR, METAL, HEXAGON ALLOY STEEL 4130
CHROME MOLYBDENUM (AIRCRAFT QUALITY) |
|
ASTM B367-13(2017) - Standard Specification for Titanium
and Titanium Alloy Castings |
|
DIN EN ISO 16968 - Solid biofuels - Determination of minor
elements (ISO 16968:2015) |
|
ASTM A788/A788M-15 - Standard Specification for Steel
Forgings, General Requirements |
|
ASTM A788/A788M-14 - Standard Specification for Steel
Forgings, General Requirements |
|
ASTM A788/A788M-13 - Standard Specification for Steel
Forgings, General Requirements |
|
ASTM A788/A788M-11 - Standard Specification for Steel
Forgings, General Requirements |
|
SAE AMS7819 - Molybdenum Alloy Bars 0.48Ti - 0.09Zr -
0.02C Arc Cast, Stress Relieved |
|
SAE AMS2526 - Molybdenum Disulfide Coating, Thin
Lubricating Film Impingement Applied |
|
ASTM D874 - Standard Test Method for Sulfated Ash from
Lubricating Oils and Additives |
|
ISO 4173 - Ferromolybdenum - Determination
of Molybdenum Content - Gravimetric Method |
|
ASTM B861-05e1 - Standard Specification for Titanium and
Titanium Alloy Seamless Pipe |
|
ISO 439 - Steel and cast iron — Determination of silicon content
— Gravimetric method |
|
FORD FLTM AJ 106-02 - MOLYBDENUM DISULFIDE, LITHIUM
SOAP, AND POLYETHYLENE IN GREASES |
|
JIS H 1401 - Methods for Chemical Analysis of Tungsten
and Molybdenum Alloy Materials |
|
MS 14295 - BAR, METAL, SQUARE, ALLOY STEEL 4130
CHROME MOLYBDENUM (AIRCRAFT QUAALITY) |
|
MIL-L-25681 - LUBRICATING OIL, MOLYBDENUM DISULLFIDE,
SILICONE BASE, HIGH TEMPERATURE |
|
ASTM A756-17(2022) - Standard Specification for Stainless
Anti-Friction Bearing Steel |
|
ASTM A788/A788M-14a - Standard Specification for Steel
Forgings, General Requirements |
|
ISO 3908 - Hardmetals — Determination of insoluble (free) carbon
— Gravimetric method |
|
ASTM B333 - Standard Specification for
Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
|
ASTM D3943 - Standard Test Method for
Total Molybdenum in Fresh Alumina-Base Catalysts |
|
ASTM A1095 - Standard Specification for High-Silicon Molybdenum Ferritic
Iron Castings |
|
DS/EN 2491 - Aerospace series - Molybdenum disulphide
dry lubricants - Coating methods |
|
ASTM F364-96 - Standard Specification
for Molybdenum Flattened Wire for Electron Tubes |
|
ASTM B385 - STANDARD SPECIFICATION
FOR MOLYBDENUM AND MOLYBDENUM BILLETS FOR REFORGING |
|
ASTM A204 - Standard Specification for Pressure Vessel
Plates, Alloy Steel, Molybdenum |
|
ASTM B848-00 - Standard Specification for Powder Forged
(P/F) Ferrous Structural Parts |
|
ASTM B848-01 - Standard Specification for Powder Forged
(P/F) Ferrous Structural Parts |
|
ASTM B348-06 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-05 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-03 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-02 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-00 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-13 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-11 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-10 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-09 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-08 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B408-06(2016) - Standard Specification for
Nickel-Iron-Chromium Alloy Rod and Bar |
|
ASTM B408-06(2011) - Standard Specification for
Nickel-Iron-Chromium Alloy Rod and Bar |
|
ASTM B668-14 - Standard Specification for UNS N08028 and
N08029 Seamless Pipe and Tube |
|
BS EN 2491 - Aerospace series - Molybdenum disulphide
dry lubricants - Coating methods |
|
BS HC 9 - Specification for
Nickel-chromium-molybdenum steel castings (880 - 1080 MPa) |
|
ASTM A705/A705M-22 - Standard Specification for
Age-Hardening Stainless Steel Forgings |
|
ASTM A314-19 - Standard Specification for Stainless Steel
Billets and Bars for Forging |
|
ASTM E360-96 - Standard Test Methods for Chemical Analysis
of Silicon and Ferrosilicon |
|
ASTM A705/A705M-20 - Standard Specification for
Age-Hardening Stainless Steel Forgings |
|
ASTM A314-15 - Standard Specification for Stainless Steel
Billets and Bars for Forging |
|
ASTM B581 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
|
ASTM UOP887-89 - Rhenium in Perrhenic Acid and Ammonium
Perrhenate by Spectrophotometry |
|
ASTM B348-08a - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B348-06a - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
SAE AMS2262 - Tolerances Nickel, Nickel Alloy, and Cobalt Alloy
Sheet, Strip, and Plate |
|
FORD WSD-M1C227-A - GREASE, LONG LIFE, NLGI 2 ***TO BE USED WITH
FORD WSS-M99P1111-A*** |
|
MIL-S-6098 - STEEL, CHROME-NICKEL-MOLYBDENUM (8735) BARS
AND REFORGING STOCK (AIRCRAFT) |
|
ASTM A534-17 - Standard Specification for Carburizing
Steels for Anti-Friction Bearings |
|
FORD WSE-M10A75-A - SINTERED IRON - MOLYBDENUM ***TO
BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B336 - Standard Specification for
Nickel-Molybdenum-Chromium Alloy (UNS N10002) Rod |
|
ASTM B348-05e1 - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM E2626 - Standard Guide for Spectrometric Analysis of
Reactive and Refractory Metals |
|
ASTM D3974-09(2015) - Standard Practices for Extraction of
Trace Elements from Sediments |
|
ASTM E363-16 - Standard Test Methods for Chemical Analysis
of Chromium and Ferrochromium |
|
ASTM D3974-81(2008) - Standard Practices for Extraction of
Trace Elements from Sediments |
|
ASTM D874-13 - Standard Test Method for Sulfated Ash from
Lubricating Oils and Additives |
|
ASTM D3974-81(1999) - Standard Practices for Extraction of Trace
Elements from Sediments |
|
ASTM D874-07 - Standard Test Method for Sulfated Ash from
Lubricating Oils and Additives |
|
ASTM D874-06 - Standard Test Method for Sulfated Ash from
Lubricating Oils and Additives |
|
ASTM D874-00 - Standard Test Method for Sulfated Ash from
Lubricating Oils and Additives |
|
ASTM E363-09 - Standard Test Methods for Chemical Analysis
of Chromium and Ferrochromium |
|
BS HC 10 - Specification for
Nickel-chromium-molybdenum steel castings (1150 - 1300 MPa) |
|
MIL-S-6758 - STEEL, CHROME-MOLYBDENUM (4130) BARS AND
REFORGING STOCK (AIRCRAFT QUALITY) |
|
ASTM B365-12(2019) - Standard Specification for Tantalum
and Tantalum Alloy Rod and Wire |
|
ASTM A1002-16(2020) - Standard Specification for Castings,
Nickel-Aluminum Ordered Alloy |
|
ASTM A705/A705M-20e1 - Standard Specification for
Age-Hardening Stainless Steel Forgings |
|
ASTM B387 - Standard Specification
for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire |
|
ASTM E315-04 - Standard Test Methods for Chemical Analysis
of Molybdenum (Withdrawn 2010) |
|
ASTM D3943-21 - Standard Test Method for
Total Molybdenum in Fresh Alumina-Base Catalysts |
|
ASTM D3943-10 - Standard Test Method for
Total Molybdenum in Fresh Alumina-Base Catalysts |
|
ASTM B333-98 - Standard Specification for Nickel-Molybdenum Alloy
Plate, Sheet, and Strip |
|
ASTM D3943-04 - Standard Test Method for
Total Molybdenum in Fresh Alumina-Base Catalysts |
|
ASTM D3943-00 - Standard Test Method for
Total Molybdenum in Fresh Alumina-Base Catalysts |
|
ASTM A1095-15 - Standard Specification for
High-Silicon Molybdenum Ferritic Iron Castings |
|
ASTM B333-03 - Standard Specification for
Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
|
ASTM B348/B348M - Standard Specification for Titanium and
Titanium Alloy Bars and Billets |
|
ASTM B883-05 - Standard Specification for Metal Injection
Molding (MIM) Ferrous Materials |
|
ASTM D874-13a - Standard Test Method for Sulfated Ash from
Lubricating Oils and Additives |
|
DS/ISO 439 - Steel and cast irons – Determination of silicon
content – Gravimetric method |
|
GMSA EMS 9309906 - GREASE MADE OF LITHIUM SOAP, BISULFIDE
OF MOLYBDENUM, AND POLYETHYLENE |
|
ASTM B883-10 - Standard Specification for Metal Injection
Molding (MIM) Ferrous Materials |
|
ASTM F289 - Standard Specification
for Molybdenum Wire and Rod for Electronic Applications |
|
ASTM B662/B662M - Standard Specification for
Silver-Molybdenum Electrical Contact Material |
|
ASTM B581-17 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
|
ASD-STAN PREN 2491 - Aerospace
series Molybdenum disulphide dry lubricants Coating methods |
|
ASTM B581-02 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
|
FORD SQ-M1A9440-A28H - STEEL, MOLYBDENUM ALLOYED ***TO
BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B265 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B581-97 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
|
ASTM B384-74 - Specification
for Molybdenum and Molybdenum Alloy Forgings (Withdrawn
1984) |
|
ASTM F49-68(1972) - Specification
for Molybdenum Strip for Electron Tubes (Withdrawn 1978) |
|
ASTM D3974-81(2003)e1 - Standard Practices for Extraction
of Trace Elements from Sediments |
|
ASTM E351-93(2000)e1 - Standard Test Methods for Chemical
Analysis of Cast Iron--All Types |
|
SAE AMS7800 - MOLYBDENUM SHEET, STRIP, PLATE, POWDER
METALLURGY, SINTERED, STRESS RELIEVED |
|
ASTM D129-00 - Standard Test Method for Sulfur in Petroleum
Products (General Bomb Method) |
|
1. SCOPE This specification defines the flame spraying of
hard molybdenum on ferrous parts. |
|
The material defined by this specification is a sintered and
heat treated molybdenum steel. |
|
API PUBL 959 - Characterization Study of Temper Embrittlement of
Chromium-Molybdenum Steels |
|
ASTM B334 - Specification for Nickel-Molybdenum-Chromium
Alloy (UNS N10002) Plate and Sheet |
|
ASTM B424-11 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Alloy (UNS N08825, UNS N08221, and |
|
ASTM E2626-08 - Standard Guide for Spectrometric Analysis
of Reactive and Refractory Metals |
|
ISO 18496 - Brazing — Fluxes for brazing — Classification and
technical delivery conditions |
|
ASTM B883-10e1 - Standard Specification for Metal Injection
Molding (MIM) Ferrous Materials |
|
DS/EN ISO 3908 - Hardmetals - Determination of insoluble (free)
carbon - Gravimetric method |
|
ASTM B407-22 - Standard Specification for
Nickel-Iron-Chromium Alloy Seamless Pipe and Tube |
|
ASTM B387-18 - Standard Specification
for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire |
|
ASTM B387-10 - Standard Specification for Molybdenum and Molybdenum Alloy
Bar, Rod, and Wire |
|
UOP925 - Nickel, Molybdenum, Phosphorous, Cobalt, and
Aluminum in Fresh Catalysts by ICP-OES |
|
ASTM A204/A204M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Molybdenum |
|
ASTM F364-96(2014) - Standard Specification
for Molybdenum Flattened Wire for Electron Tubes |
|
ASTM F364-96(2009) - Standard Specification
for Molybdenum Flattened Wire for Electron Tubes |
|
ASTM F364-96(2019) - Standard Specification
for Molybdenum Flattened Wire for Electron Tubes |
|
ASTM F364-96(2002) - Standard Specification
for Molybdenum Flattened Wire for Electron Tubes |
|
SAE AMS-S-6758 - Steel, Chrome-Molybdenum (4130) Bars and
Reforging Stock (Aircraft Quality) |
|
ASTM B518 - SPECIFICATION FOR NICKEL-CHROMIUM-IRON-COLUMBIUM-MOLYBDENUM TUNGSTEN
ALLOY SHEET |
|
JIS G 3103 - Carbon steel and molybdenum alloy steel
plates for boilers and pressure vessels |
|
ASTM B348/B348M-21 - Standard Specification for Titanium
and Titanium Alloy Bars and Billets |
|
ASTM B348/B348M-19 - Standard Specification for Titanium
and Titanium Alloy Bars and Billets |
|
ASTM B668-14(2019) - Standard Specification for UNS N08028
and N08029 Seamless Pipe and Tube |
|
FORD WSE-M1A330-A1 - CAST STEEL, VALVE SEAT INSERT ***TO BE USED
WITH FORD WSS-M99P1111-A*** |
|
ASTM A487/A487M-21 - Standard Specification for Steel
Castings Suitable for Pressure Service |
|
MS 14291 - WIRE, NONELECTRICAL, ROUND, ALLOY STEEL 4130
CHROME-MOLYBDENUM (AIRCRAFT QUALITY) |
|
ASTM A487/A487M-20 - Standard Specification for Steel
Castings Suitable for Pressure Service |
|
FORD ESA-M99C38-A - LUBRICANT, SOLID FILM - MEDIUM ***TO BE USED
WITH FORD WSS-M99P1111-A*** |
|
ASTM A487/A487M-14 - Standard Specification for Steel
Castings Suitable for Pressure Service |
|
D10.8:1996 - Recommended practices for welding of
chromium-molybdenum steel piping and tubing |
|
ASTM B621 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
|
ASTM B662-94(2000) - Standard Specification for
Silver-Molybdenum Electrical Contact Material |
|
ASTM F289-96 - Standard Specification
for Molybdenum Wire and Rod for Electronic Applications |
|
ASTM B662-94(2006) - Standard Specification for
Silver-Molybdenum Electrical Contact Material |
|
ASTM B662-94(2012) - Standard Specification for
Silver-Molybdenum Electrical Contact Material |
|
ASTM B662/B662M-20 - Standard Specification for
Silver-Molybdenum Electrical Contact Material |
|
UOP833 - MOLYBDENUM IN PLATFORMING CATALYSTS AND FINES
BY ATOMIC ABSORPTION SPECTROPHOTOMETRY |
|
ASTM B265-06 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-05 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-03 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-02 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-15 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-13 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-11 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-10 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-09 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-08 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-07 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-20 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-99 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM F1376 - Standard Guide for Metallurgical Analysis for
Gas Distribution System Components |
|
BS 3531-2 - Surgical Implants Part 2: Specification for
Materials for Metal Surgical Implants |
|
ASTM A909 - Standard Specification for Steel Forgings,
Microalloy, for General Industrial Use |
|
ASTM A534-17(2022) - Standard Specification for Carburizing
Steels for Anti-Friction Bearings |
|
ASTM A485-17(2022) - Standard Specification for High
Hardenability Antifriction Bearing Steel |
|
SAE MAM2261 - Tolerances, Metric Nickel, Nickel Alloys, and
Cobalt Alloy Bars, Rods, and Wire |
|
ASTM A105/A105M-21 - Standard Specification for Carbon
Steel Forgings for Piping Applications |
|
ASTM A105/A105M-18 - Standard Specification for Carbon
Steel Forgings for Piping Applications |
|
ASD-STAN TR 4070 - Aerospace
Series Molybdenum Disulphide Coatings List of Commercial Products |
|
FORD WSE-M10A89-A - SINTERED IRON - MOLYBDENUM STEEL
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B265-13a - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-09a - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-08b - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-08a - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-06b - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-20a - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-06a - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
FORD WSS-M1C270-A - GREASE, NLGI GRADE 2, PARK BRAKE ***TO BE
USED WITH FORD WSS-M99P1111-A*** |
|
MS 14293 - WIRE, NONELECTRICAL, HEXAGON, ALLOY STEEL 4130
CHROME-MOLYBDENUM (AIRCRAFT QUALITY) |
|
ASTM A487/A487M-14e1 - Standard Specification for Steel
Castings Suitable for Pressure Service |
|
ASTM B333-03(2008) - Standard Specification for
Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
|
ASTM D3943-10(2015) - Standard Test Method for
Total Molybdenum in Fresh Alumina-Base Catalysts |
|
ASTM A1095-15(2019) - Standard Specification for
High-Silicon Molybdenum Ferritic Iron Castings |
|
ASTM B333-03(2013) - Standard Specification for
Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
|
ASTM B333-03(2018) - Standard Specification for
Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
|
ASTM A204/A204M-17 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Molybdenum |
|
ASTM A204/A204M-12 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Molybdenum |
|
ASTM A204/A204M-03 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Molybdenum |
|
JIS Z 3318 - Flux cored wires for MAG welding
of molybdenum steel and chromium molybdenum steel |
|
ASTM B265-05e1 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
QPL-21164 - Grease, Molybdenum Disulfide, for Low and
High Temperatures, NATO Code Number G-353 |
|
ASTM B265-11e1 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-99e1 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM D874-13a(2018) - Standard Test Method for Sulfated Ash
from Lubricating Oils and Additives |
|
ASTM D1404 - Standard Test Method for Estimation of
Deleterious Particles in Lubricating Grease |
|
ASTM F1715 - Standard Guide for Wear Assessment of
Prosthetic Knee Designs in Simulator Devices |
|
SAE MAM2262 - Tolerances, Metric Nickel, Nickel Alloy, and
Cobalt Alloy Sheet, Strip, and Plate |
|
DS/EN 16964 - Fertilizers – Extraction of total micro-nutrients
in fertilizers using aqua regia |
|
ASTM B581-02(2008) - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
|
ASTM A832 - SPECIFICATION FOR PRESSURE VESSEL PLATES, ALLOY
STEEL, CHROMIUM- MOLYBDENUM-VANADIUM |
|
ASTM B621-02 - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy
(UNS N08320) Rod |
|
ASTM B425 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar |
|
ASTM B265-13ae1 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM B265-09ae1 - Standard Specification for Titanium and
Titanium Alloy Strip, Sheet, and Plate |
|
ASTM E363-83(2003)e1 - Standard Test Methods for Chemical
Analysis of Chromium and Ferrochromium |
|
FORD ESA-M1C156-A - GREASE - BENTONE/LITHIUM SOAP BASE ***TO BE
USED WITH FORD WSS-M99P1111-A*** |
|
ASTM D129-00(2005) - Standard Test Method for Sulfur in
Petroleum Products (General Bomb Method) |
|
DIN EN 16964 - Fertilizers - Extraction of total micro-nutrients
in fertilizers using aqua regia |
|
ASTM B621-95a - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
|
ASTM E371-00 - Standard Test Method for the Determination
of Boron in Ferroboron (Withdrawn 2006) |
|
FORD ESA-M1C47-A - GREASE - LONG LIFE - GENERAL CHASSIS ***TO BE
USED WITH FORD WSS-M99P1111-A*** |
|
ASTM UOP925-16 - Nickel, Molybdenum, Phosphorus,
Cobalt and Aluminum in Fresh Catalysts by ICP-OES |
|
ASTM UOP925-92 - Nickel, Molybdenum, Phosphorus,
Cobalt and Aluminum in Fresh Catalysts by ICP-AES |
|
ASTM B581-02(2013)e1 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
|
ASTM A387 - Standard Specification for
CHROMIUM-MOLYBDENUM ALLOY STEEL PLATES FOR PRESSURE VESSELS |
|
FORD WSE-M1A324-A2 - VALVE INSERT, MO-CR-W-V-CO-FE ALLOY ***TO
BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM D1404-99 - Standard Test Method for Estimation of
Deleterious Particles in Lubricating Grease |
|
ASTM A403/A403M-22 - Standard Specification for Wrought
Austenitic Stainless Steel Piping Fittings |
|
ASTM F290-94(2020) - Standard Specification for Round Wire
for Winding Electron Tube Grid Laterals |
|
ASTM F289-96(2019) - Standard Specification
for Molybdenum Wire and Rod for Electronic Applications |
|
ASTM F289-96(2014) - Standard Specification
for Molybdenum Wire and Rod for Electronic Applications |
|
ASTM F289-96(2009) - Standard Specification
for Molybdenum Wire and Rod for Electronic Applications |
|
ASTM F289-96(2002) - Standard Specification
for Molybdenum Wire and Rod for Electronic Applications |
|
The material defined by this specification is a sintered molybdenum steel
with copper infiltration. |
|
FORD SQ-M1A9441-A20H - STEEL, CHROMIUM-MOLYBDENUM ALLOYED
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B425-19 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar |
|
SAE AMS-S-6049 - Steel, Chrome-Nickel-Molybdenum (8740)
Bars and Reforging Stock (Aircraft Quality) |
|
FORD WSE-M1A303-A1 - GRAY CAST IRON - HARDENABLE CAMSHAFT ***TO
BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M1A303-A2 - GRAY CAST IRON - HARDENABLE CAMSHAFT ***TO
BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM A909/A909M - Standard Specification for Steel
Forgings, Microalloy, for General Industrial Use |
|
ASTM B336-71 - Specification for Nickel-Molybdenum-Chromium
Alloy (UNS N10002) Rod (Withdrawn 1979) |
|
ISO 7834 - Iron Ores - Determination of Arsenic Content
- Molybdenum Blue Spectrophotometric Method |
|
ASTM D820-93 - Standard Test Methods for Chemical Analysis
of Soaps Containing Synthetic Detergents |
|
ASTM A837/A837M-17 - Standard Specification for Steel Forgings,
Alloy, for Carburizing Applications |
|
ASTM B386 - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
and Foil |
|
ASTM B387-90(1995)e1 - Standard Specification
for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire |
|
FORD WSD-M1P84-A1 - COATING - MOLYBDENUM/ALLOY, CO-DEPOSIT
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B629 - Standard Practice for Preparation
of Molybdenum and Molybdenum Alloys for Electroplating |
|
FORD WSD-M10A87-A - SINTERED IRON
- MOLYBDENUM INFILTRATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B872 - Standard Specification for
Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip |
|
ASTM A873 - SPECIFICATION FOR STEEL SHEET AND STRIP,
CHROMIUM-MOLYBDENUM ALLOY, FOR PRESSURE VESSELS |
|
ASTM E1999-18 - Standard Test Method for Analysis of Cast
Iron by Spark Atomic Emission Spectrometry |
|
ASTM A518/A518M-99(2012) - Standard Specification for
Corrosion-Resistant High-Silicon Iron Castings |
|
ASTM A518/A518M-99(2008) - Standard Specification for
Corrosion-Resistant High-Silicon Iron Castings |
|
ASTM E1999-11 - Standard Test Method for Analysis of Cast
Iron by Spark Atomic Emission Spectrometry |
|
ASTM A518/A518M-99(2018) - Standard Specification for
Corrosion-Resistant High-Silicon Iron Castings |
|
ASTM UOP833-82 - Molybdenum in Platforming
Catalysts and Fines by Atomic Absorption Spectrophotometry |
|
ASTM A204/A204M-03(2007) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Molybdenum |
|
ASTM A204/A204M-93(1999) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Molybdenum |
|
FORD WSD-M1C230-A - GREASE, MOLYBDENUM DISULFIDE, CV
JOINTS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM E3047 - Standard Test Method for Analysis of Nickel
Alloys by Spark Atomic Emission Spectrometry |
|
ASTM DS6S1 - Supplemental Report on the
Elevated-Temperature Properties Of Chromium-Molybdenum Steels |
|
ASTM A301 - Specification for
Chromium-Molybdenum Steel Plates for Boilers and Other Pressure Vessels |
|
FORD ESE-M2C160-A - LUBRICANT, SOLID FILM - SOLVENT CARRIED
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM A960/A960M-20 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-19 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-16 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-15 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-14 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-13 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-10 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-08 - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A387/A387M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium- Molybdenum |
|
SAE AMS2465 - Disilicide Diffusion Coating
of Molybdenum and Molybdenum Alloys Pack Cementation
Method |
|
FORD WSE-M10A95-A1 - SINTERED IRON, MOLYBDENUM, NICKEL
ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B573 - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod |
|
ASTM B621-02(2016) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
|
ASTM B621-02(2011) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
|
ASTM B621-02(2006) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
|
ASTM F1376-92(2020) - Standard Guide for Metallurgical
Analysis for Gas Distribution System Components |
|
ASTM D1404/D1404M - Standard Test Method for Estimation of
Deleterious Particles in Lubricating Grease |
|
1. SCOPE The material defined by this standard is a lithium soap
and molybdenum disulfide base grease. |
|
ASTM E539-11 - Standard Test Method for Analysis of
Titanium Alloys by X-Ray Fluorescence Spectrometry |
|
FORD M1C145-A - GREASE, BEARING, HIGH TEMPERATURE, SYNTHETIC
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM A960/A960M-19a - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM B425-99 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Alloy (UNS N08825 and UNS N08221) Rod and Bar |
|
ASTM F1376-92(2012) - Standard Guide for Metallurgical
Analysis for Gas Distribution System Components |
|
ASTM A960/A960M-16a - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A960/A960M-14a - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM F1376-92(2005) - Standard Guide for Metallurgical
Analysis for Gas Distribution System Components |
|
ASTM F1376-92(1999) - Standard Guide for Metallurgical Analysis
for Gas Distribution System Components |
|
ASTM A960/A960M-08a - Standard Specification for Common
Requirements for Wrought Steel Piping Fittings |
|
ASTM A909/A909M-06 - Standard Specification for Steel
Forgings, Microalloy, for General Industrial Use |
|
ASTM B386-03 - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
and Foil |
|
FORD ESB-M1C112-A - GREASE - 8% MOLYBDENUM DISULFIDE
ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM D3372 + REDLINE - STANDARD TEST METHOD FOR MOLYBDENUM IN
WATER - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B872-19 - Standard Specification for
Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip |
|
FORD WSS-M1C281-A1 - GREASE, SILICONE, LITHIUM SOAP, NLGI 2-3
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B385-74 - Specification
for Molybdenum and Molybdenum Alloy Billets for Reforging
(Withdrawn 1985) |
|
ASTM A387/A387M-11 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A387/A387M-10 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A20/A20M-20 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-18 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-17 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-19 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A387/A387M-17 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A20/A20M-15 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-14 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-13 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-11 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A387/A387M-05 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A387/A387M-03 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A387/A387M-99 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A20/A20M-04 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-02 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-01 - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A387/A387M-06 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM E3047-16 - Standard Test Method for Analysis of Nickel
Alloys by Spark Atomic Emission Spectrometry |
|
ASTM B719 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar |
|
ASTM B815 - Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten
Alloy (UNS R31233) Rod |
|
ASTM E364-94(2000) - Standard Test Methods for Chemical
Analysis of Ferrochrome-Silicon (Withdrawn 2006) |
|
ASTM E1085-95(2004) - Standard Test Method for X-Ray
Emission Spectrometric Analysis of Low-Alloy Steels |
|
ASTM E1085-95(2000) - Standard Test Method for X-Ray
Emission Spectrometric Analysis of Low-Alloy Steels |
|
ISO 4941 - Steels and Iron - Determination
of Molybdenum Content - Thiocyanate Spectrophotometric Method |
|
GMSA LTP.QG.256 - Spectrophotometric determination
of molybdenum by thiocianate-stannous chloride method |
|
ASTM A469/A469M-07(2022) - Standard Specification for
Vacuum-Treated Steel Forgings for Generator Rotors |
|
ASTM A387/A387M-17a - Standard Specification for Pressure Vessel
Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A387/A387M-05a - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM A20/A20M-01b - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-00a - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-00b - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A20/A20M-01a - Standard Specification for General
Requirements for Steel Plates for Pressure Vessels |
|
ASTM A387/A387M-06a - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM B573-00 - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003, N10242)* Rod |
|
ISO 5832-4 - Implants for surgery - Metallic materials - Part 4:
Cobalt-chromium-molybdenum casting alloy |
|
ASTM A200 - Standard Specification for Seamless
Intermediate Alloy-Steel Still Tubes for Refinery Service |
|
ASTM E1473-16 - Standard Test Methods for Chemical Analysis
of Nickel, Cobalt and High-Temperature Alloys |
|
ASTM B853 - Standard Specification for Powder Metallurgy
(PM) Boron Stainless Steel Structural Components |
|
ASTM B756 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten
Alloy (UNS N06110) Rod and Bar |
|
ASTM B436 - Specification for
Nickel-Chromium-Molybdenum-Iron-Columbium Alloy (UNS NO6001) Sheet and Plat |
|
1. SCOPE The material defined by this specification is
a molybdenum, tungsten, chromium alloy cast steel. |
|
ASTM D820-93(2016) - Standard Test Methods for Chemical
Analysis of Soaps Containing Synthetic Detergents |
|
ASD-STAN PREN 4603 - Aerospace
Series Molybdenum Disulphide Coatings of Fasteners Technical
Specification |
|
ASTM A837/A837M-17(2022) - Standard Specification for Steel
Forgings, Alloy, for Carburizing Applications |
|
ASTM D820-93(2009) - Standard Test Methods for Chemical
Analysis of Soaps Containing Synthetic Detergents |
|
BS 2690-105 - Methods of testing water used in industry. Soluble
phosphate and organophosphorus compounds |
|
ASTM D820-93(2003) - Standard Test Methods for Chemical
Analysis of Soaps Containing Synthetic Detergents |
|
ASTM A837/A837M-06(2016) - Standard Specification for Steel
Forgings, Alloy, for Carburizing Applications |
|
ASTM A387/A387M-99e1 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum |
|
ASTM B573-06 - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod |
|
SAE AMS-S-5626 - Steel: Chrome-Molybdenum (4140) Bars,
Rods, and Forging Stock (For Aircraft Applications) |
|
ASTM E1473-09 - Standard Test Methods for Chemical Analysis
of Nickel, Cobalt, and High-Temperature Alloys |
|
ASTM E1473-03 - Standard Test Methods for Chemical Analysis
of Nickel, Cobalt, and High-Temperature Alloys |
|
ASTM B758 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
|
ASTM B757 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
|
ASTM F732-17 - Standard Test Method for Wear Testing of
Polymeric Materials Used in Total Joint Prostheses |
|
ASTM E1085-95(2004)e1 - Standard Test Method for X-Ray
Emission Spectrometric Analysis of Low-Alloy Steels |
|
ASTM F1714 - Standard Guide for Gravimetric Wear Assessment
of Prosthetic Hip Designs in Simulator Devices |
|
ISO 5832-12 - Implants for surgery - Metallic materials - Part
12: Wrought cobalt-chromiummolybdenum alloy |
|
ASTM A529/A529M-19 - Standard Specification for
High-Strength Carbon-Manganese Steel of Structural Quality |
|
ASTM B582 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
|
ASTM B688 - Standard Specification for
Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip |
|
ASTM B815-97 - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
|
ASTM B815-02 - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
|
DS/EN ISO 439 - Steel and cast irons – Determination of silicon
content – Gravimetric method (ISO 439:2020) |
|
ASTM E120-00 - Standard Test Methods for Chemical Analysis
of Titanium and Titanium Alloys (Withdrawn 2003) |
|
ISO 8556 - Aluminium Ores - Determination of Phosphorus Content
- Molybdenum Blue Spectrophotometric Method |
|
ASTM B424 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and Strip |
|
MIL-DTL-32101 - Carbon, Activated, Impregnated,
Copper-Silver-Zinc-Molybdenum-Triethylenediamine (ASZM-TEDA) |
|
ASTM B759 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
|
ASTM B691 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire |
|
ASTM B756-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
|
ASTM B853-07 - Standard Specification for Powder Metallurgy
(PM) Boron Stainless Steel Structural Components |
|
DS/ISO 5832-4 - Implants for surgery - Metallic materials - Part
4: Cobalt-chromium-molybdenum casting alloy |
|
DEF STAN 68-62 - Molybdenum Disulphide Powder,
Lubricating NATO Code: S-740 Joint Service Designation: ZX-35 |
|
UOP1037 - Trace Metals Analysis in Liquefied Petroleum Gases by
Inductively Coupled Plasma-Mass Spectrometry |
|
ASTM A723 - Standard Specification for Alloy Steel Forgings
for High-Strength Pressure Component Application |
|
ASTM B853-16 - Standard Specification for Powder Metallurgy
(PM) Boron Stainless Steel Structural Components |
|
ASTM B853-12 - Standard Specification for Powder Metallurgy
(PM) Boron Stainless Steel Structural Components |
|
ASTM B425-99(2009) - Standard Specification for
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar |
|
FORD ESA-M1C75-B - GREASE, GENERAL CHASSIS - LONG LIFE LUBRICATION
***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B425-99(2005) - Standard Specification for
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar |
|
ASTM A909/A909M-06(2021) - Standard Specification for Steel
Forgings, Microalloy, for General Industrial Use |
|
ASTM C1022-17 - Standard Test Methods for Chemical and
Atomic Absorption Analysis of Uranium-Ore Concentrate |
|
ASTM A909/A909M-06(2016) - Standard Specification for Steel
Forgings, Microalloy, for General Industrial Use |
|
ASTM E2209-02 - Standard Test Method for Analysis of High
Manganese Steel Using Atomic Emission Spectrometry |
|
ASTM C1022-93 - Standard Test Methods for Chemical and
Atomic Absorption Analysis of Uranium-Ore Concentrate |
|
ASTM C1022-02 - Standard Test Methods for Chemical and
Atomic Absorption Analysis of Uranium-Ore Concentrate |
|
ASTM A909/A909M-06(2011) - Standard Specification for Steel
Forgings, Microalloy, for General Industrial Use |
|
ASTM B386-03(2011) - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
and Foil |
|
ASTM B386-91(1997) - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
and Foil |
|
ASTM B629-77(2019) - Standard Practice for Preparation
of Molybdenum and Molybdenum Alloys for Electroplating |
|
ASTM B629-77(2013) - Standard Practice for Preparation
of Molybdenum and Molybdenum Alloys for Electroplating |
|
ASTM B629-77(2008) - Standard Practice for Preparation
of Molybdenum and Molybdenum Alloys for Electroplating |
|
ASTM B629-77(2003) - Standard Practice for Preparation
of Molybdenum and Molybdenum Alloys for Electroplating |
|
ASTM B423-22 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy Seamless Pipe and Tube |
|
ASTM B629-77(1997) - Standard Practice for Preparation
of Molybdenum and Molybdenum Alloys for Electroplating |
|
FORD WSD-M1A316-A - NODULAR CAST IRON -
SILICON, MOLYBDENUM ALLOYED ***TO BE USED WITH FORD
WSS-M99P1111-A*** |
|
ASTM B718-22 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Plate |
|
CSA ISO 5832-4 - Implants for Surgery - Metallic Materials -
Part 4: Cobalt-Chromium-Molybdenum Casting Alloy |
|
ASTM B853-02 - Standard Specification for Powder Metallurgy
(P/M) Boron Stainless Steel Structural Components |
|
ASTM B853-98 - Standard Specification for Powder Metallurgy
(P/M) Boron Stainless Steel Structural Components |
|
ASTM B757-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
|
ASTM B758-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
|
9986551 - Low Viscosity Full Hypoid Gear Lubricant with Limited
Slip Performance, Product Name; SAF-EH MOD LV |
|
SO 11433 - Nickel alloys — Determination of titanium content —
Diantipyrylmethane molecular absorption method |
|
ASTM E360-96(2001) - Standard Test Methods for Chemical
Analysis of Silicon and Ferrosilicon (Withdrawn 2006) |
|
ASTM B163-22 - Standard Specification for Seamless Nickel
and Nickel Alloy Condenser and Heat-Exchanger Tubes |
|
JIS G 1317-1 - Method for chemical analysis of ferromolybdenum
-- Part 1: Determination of molybdenum content |
|
ASTM B582-97 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
|
ASTM B688-18 - Standard Specification for Chromium-Nickel-Molybdenum-Iron
(UNS N08367) Plate, Sheet, and Strip |
|
ASTM A146 + REDLINE - STANDARD SPECIFICATION
FOR MOLYBDENUM OXIDE PRODUCTS - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B582-07 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
|
DS/ISO 5832-12 - Implants for surgery – Metallic materials –
Part 12: Wrought cobalt-chromium-molybdenum alloy |
|
ASTM B582-02 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
|
ASTM A859/A859M - Standard Specification for Age-Hardening
Alloy Steel Forgings for Pressure Vessel Components |
|
ASTM E2626-08e1 - Standard Guide for Spectrometric Analysis
of Reactive and Refractory Metals (Withdrawn 2017) |
|
ASTM A699-77 - Specification for Low-Carbon
Manganese-Molybdenum-Columbium Alloy Steel Plates (Withdrawn 1985) |
|
ASTM B424-19 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and Strip |
|
ASTM B691-18 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire |
|
ASTM B759-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
|
DEF STAN 02-864 - Carbon, Carbon-Manganese, and
Chromium-Molybdenum Steel Pipes and Tubes for Pressure Purposes |
|
ASTM B573-06(2016) - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod |
|
DEF STAN 91-57 - Grease,
Synthetic, Molybdenum Disulphide NATO Code No: G-353 Joint Service
Designation: XG-276 |
|
ASTM F1238 - Standard Specification for Refractory Silicide
Sputtering Targets for Microelectronic Applications |
|
ASTM A832/A832M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium- Molybdenum-Vanadium |
|
ASTM E2209-21 - Standard Test Method for Analysis of High
Manganese Steel by Spark Atomic Emission Spectrometry |
|
ASTM B163-11e1 - Standard Specification for Seamless Nickel
and Nickel Alloy Condenser and Heat-Exchanger Tubes |
|
ASTM D1404/D1404M-99(2019) - Standard Test Method for
Estimation of Deleterious Particles in Lubricating Grease |
|
ASTM B334-71 - Specification for Nickel-Molybdenum-Chromium
Alloy (UNS N10002) Plate and Sheet (Withdrawn 1980) |
|
DS/EN 24503 - Hardmetals - Determination of contents of metallic
elements by X-ray fluorescence - Fusion method |
|
DS/ISO 4503 - Hardmetals - Determination of contents of metallic
elements by X-ray fluorescence - Fusion method |
|
ASTM D1404/D1404M-99(2014) - Standard Test Method for
Estimation of Deleterious Particles in Lubricating Grease |
|
ASTM E2209-13 - Standard Test Method for Analysis of High
Manganese Steel by Spark Atomic Emission Spectrometry |
|
ASTM D1404/D1404M-99(2008) - Standard Test Method for
Estimation of Deleterious Particles in Lubricating Grease |
|
ASTM D1404/D1404M-99(2003) - Standard Test Method for
Estimation of Deleterious Particles in Lubricating Grease |
|
ASTM G209 - Standard Practice for Detecting mu-phase in
Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
|
ASTM B690 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and
Tube |
|
ASTM A209/A209M - Standard Specification for Seamless
Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A1017/A1017M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM F3273 - Standard Specification for
Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
|
ASTM B573-06(2011) - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod |
|
ISO 5832-6 - Implants for Surgery - Metallic Materials - Part 6:
Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy |
|
ASTM B723 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe |
|
ASTM A357 - Specification for Pressure Vessel Plates, Alloy
Steel, Five Percent Chromium, 0.5 percent Molybdenum |
|
ASTM A206 - Tentative Specification for Seamless
Carbon-Molybdenum Alloy-Steel Pipe for HIgh-Temperature Service |
|
ASTM B335 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-MOLYBDENUM ALLOY ROD - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B475-07 - Standard Specification for UNS N08020, UNS
N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
|
ASTM A29/A29M-20 - Standard Specification for General
Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
|
ASTM F732-00(2011) - Standard Test Method for Wear Testing
of Polymeric Materials Used in Total Joint Prostheses |
|
ASTM A29/A29M-16 - Standard Specification for General
Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
|
ASTM A29/A29M-15 - Standard Specification for General
Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
|
ASTM F732-00(2006) - Standard Test Method for Wear Testing
of Polymeric Materials Used in Total Joint Prostheses |
|
ASTM B620 - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy
(UNS N08320) Plate, Sheet, and Strip |
|
ASTM B424-19e1 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and Strip |
|
ASTM A832/A832M-17 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM B815-02(2016) - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
|
ASTM B815-02(2011) - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
|
ASTM A832/A832M-10 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM B815-02(2006) - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
|
ASTM A832/A832M-06 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM A832/A832M-99 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM B729 - Standard Specification for Seamless
Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube |
|
ASTM B709 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and
Strip |
|
ASTM D7751-16 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM D7751-14 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM D7751-12 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM D7751-11 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM A29/A29M-12 - Standard Specification for Steel Bars,
Carbon and Alloy, Hot-Wrought, General Requirements for |
|
ASTM E361-99 - Standard Test Methods for the Determination
of Arsenic and Lead in Ferromanganese (Withdrawn 2005) |
|
ASTM A29/A29M-11 - Standard Specification for Steel Bars,
Carbon and Alloy, Hot-Wrought, General Requirements for |
|
FORD SL-M8A9101-A - BEARING, DRY IMPREGNATED - SINTERED BRONZE
ON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM E1473-94a(2003) - Standard Test Methods for Chemical
Analysis of Nickel, Cobalt, and High-Temperature Alloys |
|
DS/ISO 4883 - Hardmetals - Determination of contents of metallic
elements by x-ray fluorescence - Solution method |
|
DS/EN 24883 - Hardmetals - Determination of contents of metallic
elements by x-ray fluorescence - Solution method |
|
FORD M1C157-A - GREASE - HIGH TEMPERATURE WATER RESISTANT - NO.
2 GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM E1473-94a(1998) - Standard Test Methods for Chemical
Analysis of Nickel, Cobalt, and High-Temperature Alloys |
|
ASTM A29/A29M-05 - Standard Specification for Steel Bars,
Carbon and Alloy, Hot-Wrought, General Requirements for |
|
ASTM A53/A53M-20 - Standard Specification for Pipe, Steel,
Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
|
ASTM B386/B386M - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
Foil, and Ribbon |
|
ASTM B829-19 - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM B829-18 - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM B829-99 - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM B756-00(2006) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
|
ASTM B756-00(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
|
ASTM A723/A723M - Standard Specification for Alloy Steel
Forgings for High-Strength Pressure Component Application |
|
ASTM B590 - Specification for Nickel-Iron-Chromium-Manganese-Molybdenum Alloy
(UNS NO8245) Plate, Sheet, and Strip |
|
ASTM A262 - Standard Practices for Detecting Susceptibility
to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM E572-02a - Standard Test Method for Analysis of
Stainless and Alloy Steels by X-ray Fluorescence Spectrometry |
|
ASTM A29/A29M-12e1 - Standard Specification for General
Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
|
ASTM A29/A29M-11a - Standard Specification for Steel Bars,
Carbon and Alloy, Hot-Wrought, General Requirements for |
|
ASTM E322-96e1 - Standard Test Method for X-Ray Emission
Spectrometric Analysis of Low-Alloy Steels and Cast Irons |
|
ASTM A875/A875M-21 - Standard Specification for Steel
Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
|
ASTM E2209-02(2006) - Standard Test Method for Analysis of
High Manganese Steel Using Atomic Emission Spectrometry |
|
DSF/PREN ISO 439 - Steel and cast irons – Determination of
silicon content – Gravimetric method (ISO/DIS 439:2019) |
|
ASTM B387-90(2001) - Standard Specification
for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
(Withdrawn 2010) |
|
ASTM G209-14 - Standard Practice for Detecting mu-phase in
Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
|
ASTM G209-13 - Standard Practice for Detecting mu-phase in
Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
|
ASTM G209-12 - Standard Practice for Detecting mu-phase in
Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
|
ASTM B829-19a - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM A1017/A1017M-11 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A1017/A1017M-17 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A1017/A1017M-05 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A1017/A1017M-01 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A1017/A1017M-07 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A873/A873M - Standard Specification for Steel Sheet
and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels |
|
ASTM B690-18 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and
Tube |
|
ASTM A1017/A1017M-06 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A209/A209M-03 - Standard Specification for Seamless
Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A209/A209M-98 - Standard Specification for Seamless
Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM F3273-17 - Standard Specification for
Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
|
DS/ISO 5832-6 - Implants for surgery – Metallic materials – Part
6: Wrought cobalt-nickel-chromium-molybdenum alloy |
|
ASTM B723-20 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy Welded Pipe |
|
ASTM A832/A832M-99e1 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM B758-00(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
|
DSF/ISO/DIS 5832-12 - Implants for surgery – Metallic materials
– Part 12: Wrought cobalt-chromium-molybdenum alloy |
|
ASTM B758-00(2006) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
|
ASTM D7751-14e1 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM D7751-11e1 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM B757-00(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
|
ASTM B425-11 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar |
|
ASTM B757-00(2006) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
|
ASTM B424-05 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip |
|
ASTM A357-72 - Specification for Pressure Vessel Plates,
Alloy Steel, Five Percent Chromium, 0.5 percent Molybdenum |
|
ASTM F1714-96(2013) - Standard Guide for Gravimetric Wear
Assessment of Prosthetic Hip Designs in Simulator Devices |
|
ASTM F1714-96(2018) - Standard Guide for Gravimetric Wear
Assessment of Prosthetic Hip Designs in Simulator Devices |
|
ASTM A792/A792M-21 - Standard Specification for Steel
Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
ASTM F1714-96(2008) - Standard Guide for Gravimetric Wear
Assessment of Prosthetic Hip Designs in Simulator Devices |
|
ASTM G209-12a - Standard Practice for Detecting mu-phase in
Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
|
ASTM B582-07(2013) - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
|
ASTM B582-07(2018) - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
|
ASTM B620-03 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and
Strip |
|
ASTM B709-17 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and
Strip |
|
MIL-DTL-32477 - ROD AND BAR,
COBALT-NICKEL-CHROMIUM-IRON-MOLYBDENUM ALLOY, FOR USE IN CRITICAL
SEAWATER APPLICATIONS |
|
CSA ISO 5832-6 - Implants for Surgery - Metallic Materials -
Part 6: Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy |
|
ASTM B424-98a - Standard Specification for Ni-Fe-Cr-Mo-Cu
Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip |
|
ASTM B853-16(2021)e1 - Standard Specification for Powder
Metallurgy (PM) Boron Stainless Steel Structural Components |
|
ASTM B729-20 - Standard Specification for Seamless
Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube |
|
ASTM B729-19 - Standard Specification for Seamless
Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube |
|
ASTM A484/A484M-21 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-20 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-19 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM E415-21 - Standard Test Method for Analysis of Carbon
and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
|
ASTM A484/A484M-18 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM E2209-02(2006)e1 - Standard Test Method for Analysis
of High Manganese Steel Using Atomic Emission Spectrometry |
|
ASTM E2209-02(2006)e2 - Standard Test Method for Analysis
of High Manganese Steel Using Atomic Emission Spectrometry |
|
ASTM A484/A484M-16 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM E2060 - Standard Guide for Use of Coal Combustion
Products for Solidification/Stabilization of Inorganic Wastes |
|
ASTM A484/A484M-15 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-14 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A537/A537M-20 - Standard Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
|
ASTM A484/A484M-13 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-12 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM B983-12 - Standard Specification for Precipitation
Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube |
|
ASTM A792/A792M-21a - Standard Specification for Steel
Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
|
ASTM A484/A484M-11 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM E415-17 - Standard Test Method for Analysis of Carbon
and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
|
ASTM A484/A484M-10 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-09 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-08 - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
BS EN ISO 5832-6 - Implants for surgery - Metallic materials
Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
|
ASTM B932 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip |
|
ASTM B386/B386M-19 - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
Foil, and Ribbon |
|
ASTM B709-98 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and
Strip |
|
ASTM B620-98a - Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy
(UNS N08320) Plate, Sheet, and Strip |
|
ASTM B709-04 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and
Strip |
|
JIS G 3119 - Manganese-molybdenum and
manganese-molybdenum-nickel alloy steel plates for boilers and pressure
vessels |
|
ASTM B759-00(2006) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
|
ASTM B759-00(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
|
ASTM E1834-18 - Standard Test Method for Analysis of Nickel
Alloys by Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM E1834-11 - Standard Test Method for Analysis of Nickel
Alloys by Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM A262-10 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM D129 - Standard Test Method for Sulfur in Petroleum
Products (General High Pressure Decomposition Device Method) |
|
ASTM A262-02 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A262-98 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A262-01 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A723/A723M-10 - Standard Specification for Alloy Steel
Forgings for High-Strength Pressure Component Application |
|
ASTM A723/A723M-08 - Standard Specification for Alloy Steel
Forgings for High-Strength Pressure Component Application |
|
ASTM A723/A723M-18 - Standard Specification for Alloy Steel
Forgings for High-Strength Pressure Component Application |
|
ASTM A723/A723M-02 - Standard Specification for Alloy Steel
Forgings for High-Strength Pressure Component Application |
|
ASTM A484/A484M-20b - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-20a - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
FORD ESW-M1A125-B - STEEL, 130,000 PSI (896 MPA) YIELD STRENGTH
- SAE 4140 *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM E1086-14 - Standard Test Method for Analysis of
Austenitic Stainless Steel by Spark Atomic Emission Spectrometry |
|
ASTM A484/A484M-18a - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A451/A451M-14 - Standard Specification for
Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service |
|
ASTM A484/A484M-14a - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
SN EN 15297 - Solid biofuels - Determination of minor elements -
As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
|
ASTM A484/A484M-13a - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
ASTM A484/A484M-06b - Standard Specification for General
Requirements for Stainless Steel Bars, Billets, and Forgings |
|
MIL-C-24707/6 - CASTINGS, FERROUS, CHROMIUM STEEL, FOR
PRESSURE-CONTAINING PARTS SUITABLE FOR HIGH-TEMPERATURE SERVICE |
|
FORD SA-M1A9101-A - STEEL, RUSTLESS FOR EXTERIOR TRIM,
CONTAINING MOLYBDENUM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
DS/EN 16963 - Fertilizers – Determination of boron, cobalt,
copper, iron, manganese, molybdenum and zinc using ICP-AES |
|
ASTM A1025/A1025M-10(2015) - Standard Specification for
Ferroalloys and Other Alloying Materials, General Requirements |
|
ASTM A1025/A1025M-10(2020) - Standard Specification for
Ferroalloys and Other Alloying Materials, General Requirements |
|
ASTM B475-07(2018) - Standard Specification for UNS N08020,
UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
|
ASTM B755 - Standard Specification for Nickel-Chromium-Molybdenum-Tungsten
Alloys (UNS N06110) Plate, Sheet, and Strip |
|
ASTM A280 - Tentative Specification for SEAMLESS
CHROMIUM-MOLYBDENUM ALLOY-STEEL PIPE FOR SERVICE AT HIGH TEMPERATURES |
|
ASTM B475-07(2013) - Standard Specification for UNS N08020,
UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
|
ASTM A262-02a - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A723/A723M-18a - Standard Specification for Alloy
Steel Forgings for High-Strength Pressure Component Application |
|
ASTM E322-96(2004) - Standard Test Method for X-Ray
Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons |
|
DIN EN 15297 - Solid biofuels - Determination of minor elements
- As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
|
ASTM B386/B386M-19e1 - Standard Specification
for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip,
Foil, and Ribbon |
|
ASTM A161 - Standard Specification for Seamless Low-Carbon
and Carbon-Molybdenum Steel Still Tubes for Refinery Service |
|
ASTM B599 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and
Strip |
|
FORD WSS-M1C261-A - GREASE, SYNTHETIC HYDROCARBON,
PTFE, MOLYBDENUM DISULFIDE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
DIN EN 16963 - Fertilizers - Determination of boron, cobalt,
copper, iron, manganese, molybdenum and zinc using ICP-AES |
|
ASTM A1084 - Standard Test Method for Detecting Detrimental
Phases in Lean Duplex Austenitic/ Ferritic Stainless Steels |
|
ASTM D7751-16(2021) - Standard Test Method for
Determination of Additive Elements in Lubricating Oils by EDXRF Analysis |
|
ASTM A744/A744M-21 - Standard Specification for Castings,
Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
|
ASTM A744/A744M-20 - Standard Specification for Castings,
Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
|
ASTM A859/A859M-04(2014) - Standard Specification for
Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
|
ASTM A859/A859M-04(2009) - Standard Specification for
Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
|
FORD WSE-M1P92-A2 - MOLYBDENUM AND NICKEL, CHROMIUM
ALLOY FACING, CO-DEPOSITED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M1P92-A1 - MOLYBDENUM AND NICKEL, CHROMIUM
ALLOY FACING, CO-DEPOSITED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B932-04 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip |
|
ASTM E1938 - Standard Test Method for Determination of
Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry |
|
ASTM F1238-95(1999) - Standard Specification for Refractory
Silicide Sputtering Targets for Microelectronic Applications |
|
ASTM F1238-95(2003) - Standard Specification for Refractory
Silicide Sputtering Targets for Microelectronic Applications |
|
ASTM A920/A920M - Standard Specification for Steel Bars,
Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A262-02ae1 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A262-02ae3 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A262-02ae2 - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM B719-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Bar |
|
ASTM A744/A744M-21a - Standard Specification for Castings,
Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
|
ASTM D129-13 - Standard Test Method for Sulfur in Petroleum
Products (General High Pressure Decomposition Device Method) |
|
ASTM D129-18 - Standard Test Method for Sulfur in Petroleum
Products (General High Pressure Decomposition Device Method) |
|
ASTM D129-11 - Standard Test Method for Sulfur in Petroleum
Products (General High Pressure Decomposition Device Method) |
|
ASTM A744/A744M-20a - Standard Specification for Castings,
Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
|
ASTM A875/A875M-13(2021) - Standard Specification for Steel
Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
|
ASTM G209-14(2018) - Standard Practice for Detecting
mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys |
|
ASTM B829-04a(2017) - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM B755-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and
Strip |
|
ASTM B829-04a(2009) - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM A1017/A1017M-11(2015) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
|
ASTM A209/A209M-03(2017) - Standard Specification for
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A209/A209M-03(2022) - Standard Specification for
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A209/A209M-03(2012) - Standard Specification for
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A209/A209M-03(2007) - Standard Specification for
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A832/A832M-10(2015)e1 - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM E352-18 - Standard Test Methods for Chemical Analysis
of Tool Steels and Other Similar Medium- and High-Alloy Steels |
|
ASTM A832/A832M-99(2004)e1 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
|
ASTM E352-13 - Standard Test Methods for Chemical Analysis
of Tool Steels and Other Similar Medium- and High-Alloy Steels |
|
ASTM A250/A250M - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A1084-13 - Standard Test Method for Detecting
Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels |
|
ASTM A1084-15 - Standard Test Method for Detecting
Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels |
|
ASTM B424-05(2009) - Standard Specification for
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip |
|
ASTM B425-11(2017) - Standard Specification for
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and
Bar |
|
ASTM A859/A859M-04(2019)e1 - Standard Specification for
Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
|
ASTM E2926-17 - Standard Test Method for Forensic
Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry |
|
ASTM A803/A803M-16(2021) - Standard Specification for
Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes |
|
ASTM A692 - Standard Specification for Seamless
Medium-Strength Carbon-Molybdenum Alloy-Steel Boiler and Superheater
Tubes |
|
ASTM B709-04(2014) - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and
Strip |
|
FORD WSD-M1C237-A - GREASE,
POLYUREA, MOLYBDENUM DISULPHIDE, HIGH HEAT RESISTANT ***TO BE USED
WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M1C112-B - GREASE, CALCIUM COMPLEX -
8% MOLYBDENUM DISULFIDE ADDITIVE - ***TO BE USED WITH FORD
WSS-M99P1111-A*** |
|
ASTM B620-03(2018) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and
Strip |
|
ASTM E2941 - Standard Practices for Extraction of Elements
from Ores and Related Metallurgical Materials by Acid Digestion |
|
ASTM B620-03(2013) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and
Strip |
|
ASTM B620-03(2008) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and
Strip |
|
DSF/ISO/DIS 5832-6 - Implants for surgery -- Metallic materials
-- Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
|
DSF/FPREN 16963 - Fertilizers – Determination of boron, cobalt,
copper, iron, manganese, molybdenum and zinc using ICP-AES |
|
ASTM A781/A781M-16 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-14 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-13 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-21 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-12 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-11 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-20 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-08 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B814 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and
Strip |
|
ASTM A781/A781M-03 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-02 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-01 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-00 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-18 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-17 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A1084-15a - Standard Test Method for Detecting
Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels |
|
ASTM A781/A781M-04 - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A312/A312M-21 - Standard Specification for Seamless,
Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
|
ASTM A537/A537M-13(2019) - Standard Specification for
Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
|
ASTM E885-88(1996) - Standard Test Methods for Analyses of
Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy |
|
ASTM F2066 - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM DS47 - EVALUATIONS OF THE ELEVATED TEMPERATURE TENSILE
AND CREEP-RUPTURE PROPERTIES OF C-Mo, Mn-Mo and Mn-Mo-Ni STEELS |
|
ASTM B829-04A(2009)e1 - Standard Specification for General
Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM B672 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar
and Wire |
|
ASTM F3273-17(2021)e1 - Standard Specification for
Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
|
ASTM B709-04(2009) - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and
Strip |
|
ASTM E352-18e1 - Standard Test Methods for Chemical
Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
|
ASTM E1070 - Standard Test Method for Determination of
Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry |
|
ASTM A781/A781M-14b - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM E1938-13 - Standard Test Method for Determination of
Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry |
|
ASTM A781/A781M-14a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-13a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-12b - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-12a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-20a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B818 - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet
and Strip |
|
ASTM A781/A781M-01a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-18c - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-18b - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-18a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A781/A781M-03a - Standard Specification for Castings,
Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A723/A723M-10(2015) - Standard Specification for Alloy
Steel Forgings for High-Strength Pressure Component Application |
|
ASTM A723/A723M-94(1999) - Standard Specification for Alloy
Steel Forgings for High-Strength Pressure Component Application |
|
ASTM A920/A920M-14 - Standard Specification for Steel Bars,
Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A920/A920M-07 - Standard Specification for Steel Bars,
Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A920/A920M-02 - Standard Specification for Steel Bars,
Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A920/A920M-97 - Standard Specification for Steel Bars,
Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM A1010/A1010M-13(2018) - Standard Specification for
Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip |
|
ASTM A262-15(2021) - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM B599-19 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy Plate, Sheet, and
Strip |
|
ASTM A199/A199M - Standard Specification for Seamless
Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and Condenser Tubes |
|
ASTM A262-02a(2008) - Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
ASTM A250/A250M-05 - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A250/A250M-04 - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A250/A250M-95 - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM A250/A250M-95 - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM E2465-19 - Standard Test Method for Analysis of
Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
|
ASTM E539-19 - Standard Test Method for Analysis of
Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
|
ASTM E2465-13 - Standard Test Method for Analysis of
Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
|
ASTM A920/A920M-02a - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM B688-96 - Standard Specification for Chromium-Nickel-Molybdenum-Iron
(UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
|
SAE AMS3050/4 - Performance Specification Anti-Seize Thread
Compound, High Temperature - Molybdenum Disulphide; Graphite Only |
|
ASTM B814-06 - Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten
Alloy (UNS N06920) Plate, Sheet, and Strip |
|
ASTM B814-02 - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and
Strip |
|
FORD WSS-M3P30-A2 - PHOSPHATE BASE, BONDED PTFE
RESIN, MOLYBDENUM DISULFIDE COATING ***TO BE USED WITH FORD
WSS-M99P1111-A*** |
|
DS/EN 3021 - Aerospace series – Molybdenum disulphide
dry film lubricants graphite and halogen free – Technical specification |
|
SAE AMS3678/3 - Type 3 15% Glass, 5% Molybdenum Disulfide
Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
|
ASTM STP28691S - Effects of Ferrite and Sensitization on
Intergranular and Stress-Corrosion Behavior of Cast Stainless Steels |
|
ASTM E2941-21 - Standard Practices for Extraction of
Elements from Ores and Related Metallurgical Materials by Acid Digestion |
|
ASTM B726 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM E2941-14 - Standard Practices for Extraction of
Elements from Ores and Related Metallurgical Materials by Acid Digestion |
|
ASTM A921/A921M - Standard Specification for Steel Bars,
Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM A985/A985M-21 - Standard Specification for Steel Investment
Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-20 - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-11 - Standard Specification for Steel Investment
Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-19 - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM B834-22 - Standard Specification for Pressure Consolidated
Powder Nickel Alloy Pipe Flanges, Fittings, Valves, and Parts |
|
ASTM A985/A985M-16 - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-18 - Standard Specification for Steel Investment
Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-14 - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-13 - Standard Specification for Steel Investment
Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-12 - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-08 - Standard Specification for Steel Investment
Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A506-16(2021) - Standard Specification for Alloy and
Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
|
ASTM E2060-06(2014) - Standard Guide for Use of Coal
Combustion Products for Solidification/Stabilization of Inorganic Wastes |
|
ASTM A288-18 - Standard Specification for Carbon and Alloy
Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
|
ASTM B672-95 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar
and Wire |
|
ASTM F2066-11 - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM F2066-08 - Standard Specification for Wrought Titanium-15 Molybdenum Alloy
for Surgical Implant Applications (UNS R58150) |
|
ASTM F2066-07 - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM F2066-00 - Standard Specification for Wrought Titanium-15 Molybdenum Alloy
for Surgical Implant Applications (UNS R58150) |
|
ASTM F2066-01 - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM F2066-18 - Standard Specification for Wrought Titanium-15 Molybdenum Alloy
for Surgical Implant Applications (UNS R58150) |
|
ASTM B672-02 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar
and Wire |
|
ASTM B814-95 - Standard Specification for :Nickel-Chromium-Iron-Molybdenum-Tungsten
Alloy (UNS N06920) Plate, Sheet, and Strip |
|
ASTM B818-03 - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet
and Strip |
|
ISO 5832-8 - Implants for Surgery - Metallic Materials - Part 8:
Wrought Cobalt-Nickel-Chromium-Molybdenum-Tungsten-Iron Alloy |
|
ASTM B434 - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet,
and Strip |
|
ASTM E1070-17 - Standard Test Method for Determination of
Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry |
|
ASTM E1070-11 - Standard Test Method for Determination of
Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry |
|
ASTM B719-00(2009) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Bar |
|
ASTM B719-00(2005) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Bar |
|
ASTM B436-71 - Specification for Nickel-Chromium-Molybdenum-Iron-Columbium
Alloy (UNS NO6001) Sheet and Plate (Withdrawn 1979) |
|
ASTM A985/A985M-18a - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM E1085-16 - Standard Test Method for Analysis of
Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
|
ASTM A985/A985M-12a - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-11a - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM A985/A985M-04a - Standard Specification for Steel
Investment Castings General Requirements, for Pressure-Containing Parts |
|
ASTM B755-00(2006) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and
Strip |
|
ASTM B818-98a - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet
and Strip |
|
ASTM B755-00(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and
Strip |
|
FORD ESF-M96B70-A - BERYLLIUM OXIDE - MOLYBDENUM/MANGANESE
METALLIZED - NICKEL PLATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
JIS G 3120 - Manganese-molybdenum and
manganese-molybdenum-nickel alloy steel plates quenched and tempered for
pressure vessels |
|
DIN ISO 5832-4 - Implants for surgery - Metallic materials -
Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:2014) |
|
ISO 5832-14 - Implants for surgery - Metallic materials - Part
14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
|
ASTM B691-02 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod,
Bar, and Wire |
|
ASTM B691-95 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod,
Bar, and Wire |
|
ASTM B338 - Standard Specification for Seamless and Welded
Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM E1070-17a - Standard Test Method for Determination of
Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry |
|
ASTM A957-05 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957-03 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957-96 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957-01 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM E1898-21 - Standard Test Method for Determination of
Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
|
ASTM B719-00(2014) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten- Iron-Silicon Alloy (UNS N06333)
Bar |
|
ASTM E1898-13 - Standard Test Method for Determination of
Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
|
ASTM E1898-97 - Standard Test Method for Determination of
Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
|
ASTM E1898-02 - Standard Test Method for Determination of
Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
|
ASTM D3610 - Standard Test Method for Total Cobalt in
Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration
Method |
|
ASTM F2066-13e1 - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM B673-21 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum and
Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe |
|
ASTM B674-21 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum and
Iron-Nickel-Chromium-Molybdenum-Copper Welded Tube |
|
The material defined by this specification is a sintered carbon,
copper molybdenum steel with machinability enhancing additives. |
|
DIN EN 2491 - Aerospace series - Molybdenum disulphide
dry lubricants - Coating methods; German and English version EN 2491:2011 |
|
ASTM A1041/A1041M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
|
ASTM E343 - Standard Test Method for Measuring Reaction
Rates by Analysis of Molybdenum-99 Radioactivity from Fission Dosimeters |
|
ASTM A957-01a - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B726-95 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM B726-02 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM B726-01 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM B723-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Pipe |
|
ISO 11435 - Nickel alloys — Determination
of molybdenum content — Inductively coupled plasma/atomic emission
spectrometric method |
|
ASD-STAN PREN 3021 - Aerospace
series Molybdenum disulphide dry film lubricants graphite and
halogen free Technical specification |
|
JIS Z 3317 - Solid wire electrodes, wires and rods for
gas-shielded arc welding of molybdenum steel and
chromium molybdenum steel |
|
ASTM E1938-13(2018) - Standard Test Method for
Determination of Titanium in Nickel Alloys by Diantipyrylmethane
Spectrophotometry |
|
ASTM B430 - Standard Test Method for Particle Size
Distribution of Refractory Metal Powders and Related Compounds by
Turbidimetry |
|
ASTM E352-93(2000)e1 - Standard Test Methods for Chemical
Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
|
ASTM A920/A920M-14(2019) - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
|
ASTM F1813-21 - Standard Specification for Wrought
Titanium-12Molybdenum-6Zirconium-2Iron Alloy for Surgical Implant (UNS
R58120) |
|
FORD ESA-M21P24-A1 - CORROSION PROTECTIVE COATING, SOLID FILM
LUBRICANT 96 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM A1014/A1014M-16(2021) - Standard Specification for
Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service |
|
ASTM F2066/F2066M - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM F1377-98a - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Powder for Coating of Orthopedic Implants
(UNS-R30075) |
|
ASTM B434-00 - Standard Specification for Nickel-Molybdenum-Chromium-Iron
Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip |
|
FORD WSS-M10A102-A1 - SINTERED IRON, CARBON
COPPER MOLYBDENUM STEEL, MACHINING ADDITIVES ***TO BE USED WITH
FORD WSS-M99P1111-A*** |
|
ASTM B434-06 - Standard Specification for Nickel-Molybdenum-Chromium-Iron
Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip |
|
DS/ISO 5832-14 - Implants for surgery – Metallic materials –
Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
|
DS/ISO 5832-8 - Implants for surgery – Metallic materials – Part
8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy |
|
ASTM A450/A450M-96a - Standard Specification for General
Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
|
ASTM A543/A543M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
|
ASTM B859 - Standard Practice for De-Agglomeration of
Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
|
ASTM E975 - Standard Practice for X-Ray Determination of
Retained Austenite in Steel with Near Random Crystallographic Orientation |
|
ASTM A250/A250M-05(2009) - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
|
ASTM B338-05 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-06 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM A369/A369M-11 - Standard Specification for Carbon and
Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
|
ASTM B338-13 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-10 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-09 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-17 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-14 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM A693-16(2022) - Standard Specification for
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and
Strip |
|
ASTM B338-08 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
DIN ISO 5832-12 - Implants for surgery - Metallic materials -
Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:2019) |
|
ASTM A514/A514M-18 - Standard Specification for
High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for
Welding |
|
ASTM A789/A789M-22 - Standard Specification for Seamless
and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
|
ASTM D3610-00 - Standard Test Method for Total Cobalt In
Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration
Method |
|
ASTM B756-00(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar (Withdrawn
2021) |
|
FORD WSK-M4D852-A - ACETAL (POM)
COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND ***TO BE
USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B814-06(2020) - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and
Strip |
|
ASTM B688-96(2009) - Standard Specification for Chromium-Nickel-Molybdenum-Iron
(UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
|
ASTM B688-96(2004) - Standard Specification for
Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and
Strip |
|
ASTM B814-06(2016) - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and
Strip |
|
ASTM B688-96(2014) - Standard Specification for
Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and
Strip |
|
ASTM B814-06(2011) - Standard Specification for
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and
Strip |
|
FORD ESF-M4D159-A - NYLON (TYPE 66), GLASS FIBER REINFORCED
- MOLYBDENUM DISULFIDE FILLED ***TO BE USED WITH FORD
WSS-M99P1111-A*** |
|
ASTM A1041/A1041M-04 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
|
ASTM B690-96 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367)
Seamless Pipe and Tube |
|
SAE AMS3678/12 - Type 12 10% Mineral,
2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene
(PTFE) Moldings or Extrusions |
|
ASTM B690-02 - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367)
Seamless Pipe and Tube |
|
ASTM A490M-14 - Standard Specification for High-Strength
Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) |
|
ASTM A490M-12 - Standard Specification for High-Strength
Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) |
|
ASTM B338-05a - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-05b - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B518-87 - Specification for
Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Rod and
Bar (Withdrawn 1995) |
|
ASTM A605/A605M-82 - Specification for Pressure Vessel
Plates, Alloy Steel, Quenched-and-Tempered Nickel-Cobalt-Molybdenum-Chromium |
|
ASTM A6/A6M-21 - Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling |
|
ASTM B338-08b - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-06a - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM A6/A6M-19 - Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling |
|
ASTM A505-16(2021) - Standard Specification for Steel,
Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
|
ASTM A6/A6M-17 - Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling |
|
ASTM B338-13a - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-08a - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM A291/A291M-19 - Standard Specification for Steel
Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
|
ASTM A369/A369M-18a - Standard Specification for Carbon and
Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
|
ASTM A291/A291M-18 - Standard Specification for Steel
Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
|
ASTM F562-00 - Standard Specification for Wrought Cobalt-35
Nickel-20 Chromium-10 Molybdenum Alloy for Surgical Implant
Applications |
|
ASTM B672-02(2007) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar
and Wire |
|
ASTM B672-02(2013) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar
and Wire |
|
ASTM B672-02(2018) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar
and Wire |
|
ASTM B818-03(2018) - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet
and Strip |
|
ASTM DS58 - EVALUATION OF THE ELEVATED TEMPERATURE TENSILE
AND CREEP-RUPTURE PROPERTIES OF 3 TO 9 PERCENT
CHROMIUM-MOLYBDENUM STEELS |
|
ASTM B818-03(2013) - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet
and Strip |
|
ASTM B818-03(2008) - Standard Specification for
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet
and Strip |
|
ASTM F1813-06 - Standard Specification for Wrought
Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant
(UNS R58120) |
|
ASTM B758-00(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube (Withdrawn
2021) |
|
ASTM B519 - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-IRON-COLUMBIUM-MOLYBDENUM-TUNGSTEN ALLOY (UNS N06102) PLATE,
SHEET, AND STRIP |
|
ASTM B333 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-MOLYBDENUM ALLOY PLATE, SHEET, AND STRIP - INCLUDES STANDARD +
REDLINE (PDF) |
|
ASTM D3943 + REDLINE - STANDARD TEST METHOD FOR
TOTAL MOLYBDENUM IN FRESH ALUMINA-BASE CATALYSTS - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B757-00(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
(Withdrawn 2021) |
|
ASTM B338-10e1 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM B338-17e1 - Standard Specification for Seamless and
Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
|
ASTM A6/A6M-17a - Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling |
|
ASTM A6/A6M-16a - Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling |
|
ASTM B430-97 - Standard Test Method for Particle Size
Distribution of Refractory Metal Powders and Related Compounds by
Turbidimetry |
|
ASTM A794/A794M-18 - Standard Specification for Commercial Steel
(CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled |
|
ASTM A514/A514M-18e1 - Standard Specification for
High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for
Welding |
|
ASTM A291/A291M-18a - Standard Specification for Steel
Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
|
ASTM F2066/F2066M-13 - Standard Specification for Wrought
Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS
R58150) |
|
ASTM A739 - Standard Specification for Steel Bars, Alloy,
Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
|
ASTM B691-02(2013) - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod,
Bar, and Wire |
|
ASTM A543/A543M-09 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
|
ASTM B691-02(2007) - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod,
Bar, and Wire |
|
ASTM F1350 - Standard Specification for Wrought
18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS
S31673) |
|
ASTM A957/A957M-21 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-12 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-20 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B581 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-IRON-MOLYBDENUM-COPPER ALLOY ROD - INCLUDES STANDARD +
REDLINE (PDF) |
|
ASTM A957/A957M-18 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-15 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-14 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-13 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B859-21 - Standard Practice for De-Agglomeration of
Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
|
ASTM A957/A957M-09 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-08 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B424-11(2016) - Standard Specification for
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate,
Sheet, and Strip |
|
ASTM A957/A957M-11 - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B859-03 - Standard Practice for De-Agglomeration of
Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
|
ASTM B859-13 - Standard Practice for De-Agglomeration of
Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
|
ASTM E975-03 - Standard Practice for X-Ray Determination of
Retained Austenite in Steel with Near Random Crystallographic Orientation |
|
ASTM A409/A409M-15 - Standard Specification for Welded
Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature
Service |
|
ASTM E975-00 - Standard Practice for X-Ray Determination of
Retained Austenite in Steel with Near Random Crystallographic Orientation |
|
ASTM A409/A409M-14 - Standard Specification for Welded
Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature
Service |
|
ASTM A995/A995M-20 - Standard Specification for Castings,
Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
|
ASTM A995/A995M-19 - Standard Specification for Castings,
Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
|
ASTM F961-96 - Standard Specification for Cobalt-35
Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical
Implants [UNS R30035] |
|
ASTM B423-05 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)*
Seamless Pipe and Tube |
|
ASTM B759-00(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
(Withdrawn 2021) |
|
ASTM B423-03 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)*
Seamless Pipe and Tube |
|
ASTM B423-99 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)*
Seamless Pipe and Tube |
|
ASTM B723-00(2009) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Pipe |
|
ASTM B723-00(2005) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy (UNS N06333) Welded Pipe |
|
ASTM A957/A957M-11a - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B723-00(2014) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Pipe |
|
MIL-S-23284 - STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS,
SLEEVES, PROPELLER NUTS, COUPLINGS, AND STOCKS (RUDDERS AND DIVING PLANES) |
|
ASTM A957/A957M-18a - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B726-02(2021) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM A957/A957M-15a - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM A957/A957M-12a - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM E2823-17 - Standard Test Method for Analysis of Nickel
Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
|
ASTM A957/A957M-09a - Standard Specification for Investment
Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
ASTM B726-02(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM A921/A921M-93(2022) - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM B726-02(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM B726-02(2006) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Welded Tube |
|
ASTM B590-73 - Specification for
Nickel-Iron-Chromium-Manganese-Molybdenum Alloy (UNS NO8245) Plate,
Sheet, and Strip (Withdrawn 1980) |
|
ASTM F3018 - Standard Guide for Assessment of Hard-on-Hard
Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices |
|
ASTM A921/A921M-93(2016) - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM A921/A921M-93(2011) - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM F961-03 - Standard Specification for Cobalt-35
Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical
Implants [UNS R30035] |
|
ASTM A872/A872M-21 - Standard Specification for
Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive
Environments |
|
ASTM A921/A921M-93(2005) - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM A921/A921M-93(1999) - Standard Specification for Steel
Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
|
ASTM A995/A995M-18a - Standard Specification for Castings,
Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
|
DS/CEN/TS 17060 - Fertilizers – Determination
of molybdenum in concentrations > 10 % using a gravimetric
method with 8-hydroxyquinoline |
|
ASTM B434-06(2016) - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet,
and Strip |
|
ASTM B387 + REDLINE - STANDARD SPECIFICATION
FOR MOLYBDENUM AND MOLYBDENUM ALLOY BAR, ROD, AND WIRE -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM E572-21 - Standard Test Method for Analysis of
Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence
Spectrometry |
|
ASTM E572-13 - Standard Test Method for Analysis of
Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence
Spectrometry |
|
ASTM E572-12 - Standard Test Method for Analysis of
Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence
Spectrometry |
|
ISO 21814 - Fine ceramics (advanced ceramics, advanced technical
ceramics) - Methods for chemical analysis of aluminium nitride powders |
|
FORD ESA-M21P24-A2 - CORROSION PROTECTIVE COATING, SOLID FILM
LUBRICANT 500 h SALT SPRAY *** TO BE USED WITH FORD WSS - M99P1111 - A*** |
|
ASTM B677 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum and
Iron-Nickel-Chromium-Molybdenum-Copper Seamless Pipe and Tube |
|
ASTM F799 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS
R31537, R31538, R31539) |
|
ASTM B434-06(2011) - Standard Specification for
Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate,
Sheet, and Strip |
|
DS/EN ISO 5832-6 - Implants for surgery – Metallic materials –
Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO
5832-6:1997) |
|
ASTM D8207 - Standard Test Method for Determination of
Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA)
Spectrometry |
|
ASTM A450/A450M-96a(2001) - Standard Specification for
General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel
Tubes |
|
ASTM F1350-08 - Standard Specification for Wrought
18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS
S31673) |
|
ASTM B662/B662M + REDLINE - STANDARD SPECIFICATION FOR
SILVER-MOLYBDENUM ELECTRICAL CONTACT MATERIAL - INCLUDES STANDARD +
REDLINE (PDF) |
|
ASTM A782 - SPECIFICATION FOR PRESSURE-VESSEL PLATES,
QUENCHED-AND-TEMPERED, MANGANESE-CHROMIUM-MOLYBDENUM-SILICON ZIRCONIUM ALLOY
STEEL |
|
ASTM F1350-15 - Standard Specification for Wrought
18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS
S31673) |
|
ASTM B722 - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy (UNS N06333) Seamless Pipe and Tube |
|
ASTM B338-17(2021) - Standard Specification for Seamless
and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat
Exchangers |
|
ASTM A952/A952M-02(2022) - Standard Specification for
Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment
Links |
|
ASTM F75 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical
Implants (UNS R30075) |
|
ASTM D3610-00(2015) - Standard Test Method for Total Cobalt
in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration
Method |
|
ASTM D3610-00(2004) - Standard Test Method for Total Cobalt
In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration
Method |
|
ASTM D3610-00(2010) - Standard Test Method for Total Cobalt
In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration
Method |
|
ASTM A302/A302M-03 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel |
|
DSF/ISO/DIS 5832-14 - Implants for surgery -- Metallic materials
-- Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
|
ASTM B690-02(2013) - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367)
Seamless Pipe and Tube |
|
ASTM B690-02(2007) - Standard Specification for
Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367)
Seamless Pipe and Tube |
|
ASTM F1238-95(2011) - Standard Specification for Refractory
Silicide Sputtering Targets for Microelectronic Applications (Withdrawn 2020) |
|
ASTM A605/A605M - STANDARD SPECIFICATION FOR PRESSURE
VESSEL PLATES, ALLOY STEEL, QUENCHED-AND-TEMPERED
NICKEL-COBALT-MOLYBDENUM-CHROMIUM |
|
ASTM B718 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Plate, Sheet, and Strip |
|
ASTM A699 - STANDARD SPECIFICATION FOR LOW-CARBON
MANGANESE-MOLYBDENUM- COLUMBIUM ALLOY STEEL PLATES, SHAPES, AND BARS (R 1981)
(E1-1984) |
|
ASTM A302/A302M-93 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel |
|
ASTM F3018-17 - Standard Guide for Assessment of
Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing
Arthroplasty Devices |
|
ASTM E2371-04 - Standard Test Method for Analysis of
Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
(Withdrawn 2013) |
|
DS/EN 17043 - Fertilizers – Determination
of molybdenum in concentrations ≤ 10 % using spectrometry of a
complex with ammonium thiocyanate |
|
ASTM F1813-01 - Standard Specification for Wrought Titanium
- 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical Implant
(UNS R58120) |
|
DS/ISO 5832-7 - Implants for surgery – Metallic materials – Part
7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
|
FORD ESB-M99C107-A - LUBRICANT, SOLID FILM, RESIN
BONDED MOLYBDENUM DISULFIDE/PTFE, HEAT CURABLE ***TO BE USED WITH
FORD WSS-M99P1111-A*** |
|
ASTM DS6S2 - SUPPLEMENTAL REPORT ON THE ELEVATED-TEMPERATURE
PROPERTIES OF CHROMIUM-MOLYBDENUM STEELS (An Evaluation of 2 1/4Cr-1Mo
Steel) |
|
ASTM A204/A204M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, MOLYBDENUM - INCLUDES STANDARD
+ REDLINE (PDF) |
|
ASTM B430-97(2001) - Standard Test Method for Particle Size
Distribution of Refractory Metal Powders and Related Compounds by
Turbidimetry |
|
ASTM A794/A794M-12(2017) - Standard Specification for
Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum),
Cold-Rolled |
|
DIN EN 17043 - Fertilizers - Determination
of molybdenum in concentrations ≤ 10 % using spectrometry of a
complex with ammonium thiocyanate |
|
ASTM A302/A302M-97e1 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel |
|
ASTM F1350-02 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation
Wire (UNS S31673) |
|
ASTM A543/A543M-09(2021) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered
Nickel-Chromium-Molybdenum |
|
ASTM B677-21 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum and
Iron-Nickel-Chromium-Molybdenum-Copper Seamless Pipe and Tube |
|
ASTM A543/A543M-09(2014) - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
|
DEF STAN 02-822 - Requirements for Nickel
Chromium Molybdenum Niobium Alloy 625 Sand Castings and Ingots,
Centrifugal Castings, and Welding |
|
ASTM F799-19 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS
R31537, R31538, R31539) |
|
ASTM A543/A543M-93(1999) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered
Nickel-Chromium-Molybdenum |
|
ASTM B722-06 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Seamless Pipe and Tube |
|
ASTM E1938-08 - Standard Test Method for Determination of
Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption
Spectrometry |
|
ASTM D8207-18 - Standard Test Method for Determination of
Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA)
Spectrometry |
|
ASTM B621 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM ALLOY (UNS N08320) ROD - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B423 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845)
Seamless Pipe and Tube |
|
ASTM B859-13(2018) - Standard Practice for De-Agglomeration
of Refractory Metal Powders and Their Compounds Prior to Particle Size
Analysis |
|
ASTM B859-95(2000) - Standard Practice for De-Agglomeration
of Refractory Metal Powders and Their Compounds Prior to Particle Size
Analysis |
|
ASTM E975-03(2008) - Standard Practice for X-Ray
Determination of Retained Austenite in Steel with Near Random
Crystallographic Orientation |
|
ASTM B722-02 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Seamless Pipe and Tube |
|
ASTM F799-02 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS
R31537, R31538, R31539) |
|
ASTM F1350-01 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation
Wire (UNS S31673) |
|
ASTM F799-99 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS
R31537, R31538, R31539) |
|
ASTM B833-20 - Standard Specification for Zinc and Zinc
Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of
Steel |
|
ASTM F1813-97e1 - Standard Specification for Wrought
Titanium - 12 Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical
Implant (UNS R58120) |
|
ASTM F75-07 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical
Implants (UNS R30075) |
|
ASTM F75-98 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical
Implants (UNS R30075) |
|
ASTM F75-01 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical
Implants (UNS R30075) |
|
ASTM F75-12 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical
Implants (UNS R30075) |
|
ASTM F75-18 - Standard Specification for Cobalt-28
Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical
Implants (UNS R30075) |
|
FORD WSE-M10A98-A1 - SINTERED IRON, NICKEL, MOLYBDENUM,
CHROMIUM, TUNGSTEN, VANADIUM, COPPER ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B423-05(2009) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)*
Seamless Pipe and Tube |
|
DSF/FPREN ISO 5832-6 - Implants for surgery – Metallic materials
– Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO
5832-6:1997) |
|
ASTM B625-05 - Standard Specification for UNS N08925, UNS
N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and
Strip |
|
ASTM B718-00 - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Plate, Sheet, and Strip |
|
ASTM B430-97(2001)e1 - Standard Test Method for Particle
Size Distribution of Refractory Metal Powders and Related Compounds by
Turbidimetry |
|
ASTM A543/A543M-93(2004)e1 - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered
Nickel-Chromium-Molybdenum |
|
ASTM DS50 - EVALUATION OF THE ELEVATED TEMPERATURE TENSILE
AND CREEP-RUPTURE PROPERTIES OF 1/2Cr-1/2Mo, ICr-1/2Mo, and I1/4Cr-1/2Mo-Si
STEELS |
|
ASTM E362-99 - Standard Test Methods for the Determination
of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese (Withdrawn
2005) |
|
ASTM E2823-11 - Standard Test Method for Analysis of Nickel
Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based
Method) |
|
ASTM B859-03(2008)e1 - Standard Practice for
De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to
Particle Size Analysis |
|
BS ISO 5832-12 - TC - Tracked Changes (Redline) - Implants for
surgery - Metallic materials Part 12: Wrought
cobalt-chromium-molybdenum alloy |
|
DSF/FPREN 17043 - Fertilizers – Determination
of molybdenum in concentrations ≤ 10 % using spectrometry of a
complex with ammonium thiocyanate |
|
ASTM A873/A873M-87a(1993) - Standard Specification for
Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels
(Withdrawn 1997) |
|
ASTM B423-11 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845)
Seamless Pipe and Tube |
|
ASTM B425 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM-COPPER ALLOYS ROD AND BAR - INCLUDES STANDARD
+ REDLINE (PDF) |
|
ASTM B445-87 - Specification for
Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102)
Seamless Pipe and Tube (Withdrawn 1995) |
|
ASTM B932-04(2010) - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
(Withdrawn 2015) |
|
ASTM A739-90a(2016) - Standard Specification for Steel
Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both |
|
ASTM D7303 - Standard Test Method for Determination of
Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission
Spectrometry |
|
ASTM A739-90a(2022) - Standard Specification for Steel
Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both |
|
ASTM A739-90a(2012) - Standard Specification for Steel
Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both |
|
ASTM A739-90a(2006) - Standard Specification for Steel
Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both |
|
ASTM A739-90a(2000) - Standard Specification for Steel
Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing
Parts, or Both |
|
DSF/PREN ISO 5832-6 - Implants for surgery – Metallic materials
– Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO/DIS
5832-6:2021) |
|
ASTM B877-96(2018) - Standard Test Method for Gross Defects
and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA)
Method |
|
ASTM B877-96(2013) - Standard Test Method for Gross Defects
and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA)
Method |
|
ASTM B877-96(2008) - Standard Test Method for Gross Defects
and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA)
Method |
|
ASTM B599-92(1997) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700)
Plate, Sheet, and Strip |
|
ASTM D126-87(2019) - Standard Test Methods for Analysis of
Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium
Oxide Green |
|
ASTM D126-87(2012) - Standard Test Methods for Analysis of
Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium
Oxide Green |
|
ASTM A297/A297M-21 - Standard Specification for Steel
Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General
Application |
|
ASTM B519-92 - Specification for
Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Plate,
Sheet, and Strip (Withdrawn 1995) |
|
ASTM D126-87(1997) - Standard Test Methods for Analysis of
Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium
Oxide Green |
|
ASTM A297/A297M-20 - Standard Specification for Steel
Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General
Application |
|
ASTM D126-87(2002) - Standard Test Methods for Analysis of
Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium
Oxide Green |
|
ASTM A297/A297M-19 - Standard Specification for Steel
Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General
Application |
|
ASTM D126-87(2006) - Standard Test Methods for Analysis of
Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium
Oxide Green |
|
ASTM E353-19 - Standard Test Methods for Chemical Analysis
of Stainless, Heat-Resisting, Maraging, and Other Similar
Chromium-Nickel-Iron Alloys |
|
ASTM B755-00(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
(Withdrawn 2021) |
|
FORD WSK-M4D795-A - POLYAMIDE 66 (PA66), HEAT
STABILIZED, MOLYBDENUM DISULFIDE FILLED MOLDING COMPOUND ***TO BE
USED WITH FORD WSS-M99P1111-A*** |
|
ASTM E353-14 - Standard Test Methods for Chemical Analysis
of Stainless, Heat-Resisting, Maraging, and Other Similar
Chromium-Nickel-Iron Alloys |
|
ASTM B670-07 - Standard Specification for
Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for
High-Temperature Service |
|
ASTM B761-98 - Standard Test Method for Particle Size
Distribution of Powders and Related Compounds by X-Ray Monitoring of Gravity
Sedimentation |
|
ASTM D6247 - Standard Test Method for Determination of
Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence
Spectrometry |
|
ASTM E50-17 - Standard Practices for Apparatus, Reagents,
and Safety Considerations for Chemical Analysis of Metals, Ores, and Related
Materials |
|
DS/EN 16962 - Fertilizers – Extraction of water soluble
micro-nutrients in fertilizers and removal of organic compounds from
fertilizer extracts |
|
ASTM A297/A297M-21a - Standard Specification for Steel
Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General
Application |
|
ASTM B599-92(2003)e1 - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700)
Plate, Sheet, and Strip |
|
DEF STAN 95-14 - Bars, Billets, Plates and Forgings, Weldable
Chromium-Nickel-Copper-Molybdenum Precipitation Hardening Corrosion
Resisting Steel |
|
ASTM B722-06(2011) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy (UNS N06333) Seamless Pipe and Tube |
|
ASTM E2594-20 - Standard Test Method for Analysis of Nickel
Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
(Performance-Based) |
|
ASTM D7691 - Standard Test Method for Multielement Analysis
of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry
(ICP-AES) |
|
ASTM D7441-08 - Standard Practice for Separation of
Beryllium from Other Metals in Digestion and Extraction Solutions from
Workplace Dust Samples |
|
DIN EN 16962 - Fertilizers - Extraction of water soluble
micro-nutrients in fertilizers and removal of organic compounds from
fertilizer extracts |
|
ASTM A961/A961M-21 - Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications |
|
ASTM A961/A961M-20 - Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications |
|
ASTM A659/A659M-18 - Standard Specification for Commercial
Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent),
Hot-Rolled |
|
ASTM F1350-91(2000) - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation
Wire (UNS S31673) |
|
ASTM B722-95(2000) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Seamless Pipe and Tube |
|
ASTM A961/A961M-19 - Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications |
|
ASTM A961/A961M-16 - Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications |
|
ASTM E353-19e1 - Standard Test Methods for Chemical
Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar
Chromium-Nickel-Iron Alloys |
|
ASTM A710/A710M-00 - Standard Specification for
Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy
Structural Steel Plates |
|
ASTM A710/A710M-01 - Standard Specification for
Age-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy
Structural Steel Plates |
|
ASTM B718-00(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Plate, Sheet, and Strip |
|
ASTM A1016/A1016M-18 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM B718-00(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Plate, Sheet, and Strip |
|
ASTM A1016/A1016M-17 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM B718-00(2006) - Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon
Alloy (UNS N06333) Plate, Sheet, and Strip |
|
ASTM A1016/A1016M-14 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-13 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-08 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-04 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-02 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-01 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM D7303-17 - Standard Test Method for Determination of
Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission
Spectrometry |
|
ASTM B625-05(2011) - Standard Specification for UNS N08925,
UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet,
and Strip |
|
ASTM D7303-12 - Standard Test Method for Determination of
Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission
Spectrometry |
|
ASTM D7303-06 - Standard Test Method for Determination of
Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission
Spectrometry |
|
ASTM A961/A961M-19a - Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications |
|
ASTM A961/A961M-16a - Standard Specification for Common
Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping
Applications |
|
ASTM E350-18 - Standard Test Methods for Chemical Analysis
of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and
Wrought Iron |
|
ASTM A1016/A1016M-18a - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-17a - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM E350-12 - Standard Test Methods for Chemical Analysis
of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and
Wrought Iron |
|
ASTM A387/A387M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, CHROMIUM-MOLYBDENUM - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM A1016/A1016M-04a - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-02a - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A1016/A1016M-01a - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM A250/A250M-05(2014) - Standard Specification for
Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
(Withdrawn 2017) |
|
ASTM E1938-02 - Standard Test Method for Determination of
Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption
Spectrometric Method |
|
ASTM B761 - Standard Test Method for Particle Size
Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of
Gravity Sedimentation |
|
ASTM C761-11 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Uranium Hexafluoride |
|
ASTM C761-18 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Uranium Hexafluoride |
|
ASTM C761-04 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Uranium Hexafluoride |
|
ASTM D6247-18 - Standard Test Method for Determination of
Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence
Spectrometry |
|
ASTM B423-11(2021) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845)
Seamless Pipe and Tube |
|
ASTM B423-11(2016) - Standard Specification for
Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845)
Seamless Pipe and Tube |
|
ASTM A1016/A1016M-14e1 - Standard Specification for General
Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes |
|
ASTM D7691-16 - Standard Test Method for Multielement
Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission
Spectrometry (ICP-AES) |
|
ASTM D7691-11 - Standard Test Method for Multielement
Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission
Spectrometry (ICP-AES) |
|
ASTM E343-96 - Standard Test Method for Measuring Reaction
Rates by Analysis of Molybdenum-99 Radioactivity From Fission Dosimeters
(Withdrawn 2002) |
|
DSF/FPREN 16962 - Fertilizers – Extraction of water soluble
micro-nutrients in fertilizers and removal of organic compounds from
fertilizer extracts |
|
FORD ESP-M1C187-A - GREASE, LONG LIFE LUBRICATION
- MOLYBDENUM DISULFIDE ADDITIVE - CONSTANT VELOCITY JOINT ***TO BE
USED WITH FORD WSS-M99P1111-A*** |
|
ASTM C761-04e1 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Uranium Hexafluoride |
|
ASTM E1086-08 - Standard Test Method for Optical Emission
Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane
Excitation Technique |
|
ASTM F138-03 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for
Surgical Implants (UNS S31673) |
|
ASTM F138-97 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for
Surgical Implants (UNS S31673) |
|
ASTM F138-00 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for
Surgical Implants (UNS S31673) |
|
ASTM B443 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium
Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip |
|
ASTM A296 - Standard Specification for Corrosion-Resistant
Iron-Chromium, Iron-Chromium-Nickel, and Nickel-Base Alloy Castings for
General Application |
|
JIS G 4110 - High strength chromium-molybdenum and
chromium-molybdenum-vanadium alloy steel plates for pressure vessels under
high-temperature service |
|
DOD-F-24669/4 - FORGINGS AND FORGING STOCK, STEEL BARS AND
BILLETS, NICKEL AND NICKEL-MOLYBDENUM MODIFIED HADFIELD; LOW MAGNETIC
PERMEABILITY (METRIC) |
|
ASTM B670-07(2018) - Standard Specification for
Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for
High-Temperature Service |
|
ASTM B670-07(2013) - Standard Specification for
Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for
High-Temperature Service |
|
ASTM B815 + REDLINE - STANDARD SPECIFICATION FOR
COBALT-CHROMIUM-NICKEL-MOLYBDENUM-TUNGSTEN ALLOY (UNS R31233) ROD - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B719 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COBALT-TUNGSTEN-IRON-SILICON ALLOY BAR - INCLUDES
STANDARD + REDLINE (PDF) |
|
QPL-24355 - ELECTRODES, WELDING, BARE, SOLID NICKEL MANGANESE
CHROMIUM MOLYBDENUM ALLOY STEEL FOR PRODUCING HY 130 WELDMENTS FOR
ASWELDED APPLICATIONS |
|
ASTM F1537-00 - Standard Specification for Wrought
Cobalt-28-Chromium-6-Molybdenum Alloy for Surgical Implants (UNS R31537,
UNS R31538, and UNS R31539) |
|
ASTM E354-21 - Standard Test Methods for Chemical Analysis
of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel,
and Cobalt Alloys |
|
ASTM E354-14 - Standard Test Methods for Chemical Analysis
of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel,
and Cobalt Alloys |
|
ASTM A782/A782M - Standard Specification for
Pressure-Vessel Plates, Quenched-and-Tempered,
Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
|
ASTM D4951 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic
Emission Spectrometry |
|
ASTM B756 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN ALLOY (UNS N06110) ROD AND BAR - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B573 + REDLINE - STANDARD SPECIFICATION FOR NICKEL-MOLYBDENUM-CHROMIUM-IRON
ALLOYS (UNS N10003, N10242) ROD - INCLUDES STANDARD + REDLINE (PDF) 18 |
|
ASTM A659/A659M-12(2017) - Standard Specification for
Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum
Percent), Hot-Rolled |
|
ASTM A608/A608M-20 - Standard Specification for
Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure
Application at High Temperatures |
|
ASTM A736/A736M-12 - Standard Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium
Alloy Steel |
|
ASTM B758 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN ALLOYS (UNS N06110) WELDED TUBE -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM E353-93(2000)e1 - Standard Test Methods for Chemical
Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar
Chromium-Nickel-Iron Alloys |
|
ASTM B625-14 - Standard Specification for UNS N08925, UNS
N08031, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033
Plate, Sheet, and Strip |
|
ASTM E2594-09 - Standard Test Method for Analysis of Nickel
Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
(Performance-Based Method) |
|
ASTM F139-03 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip
for Surgical Implants (UNS S31673) |
|
ASTM F139-00 - Standard Specification for Wrought 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip
for Surgical Implants (UNS S31673) |
|
ASTM B443-19 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium
Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip |
|
ASTM E354-21e1 - Standard Test Methods for Chemical
Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron,
Nickel, and Cobalt Alloys |
|
ASTM E2941-13 - Standard Practice for Nitric
Acid-Extraction of Elements from Ores and Related Metallurgical Materials by
Closed Vessel Microwave Heating |
|
ASTM B757 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN- ALLOYS (UNS N06110) WELDED PIPE -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM A1017/A1017M + RL - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, CHROMIUM-MOLYBDENUM-TUNGSTEN - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B688 + REDLINE - STANDARD SPECIFICATION FOR
CHROMIUM-NICKEL-MOLYBDENUM-IRON (UNS N08367) PLATE, SHEET, AND STRIP -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B582 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-IRON-MOLYBDENUM-COPPER ALLOY PLATE, SHEET, AND STRIP -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B690 + REDLINE - STANDARD SPECIFICATION FOR
IRON-NICKEL-CHROMIUM-MOLYBDENUM ALLOYS (UNS N08367) SEAMLESS PIPE AND
TUBE - INCLUDES STANDARD + REDLINE |
|
ASTM A453/A453M-08 - Standard Specification for
High-Temperature Bolting Materials, with Expansion Coefficients Comparable to
Austenitic Stainless Steels |
|
ASTM A1041/A1041M-04(2009) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Higher Strength
Chromium-Molybdenum-Tungsten (Withdrawn 2013) |
|
ASTM F745 - Standard Specification for 18 Chromium-12.5
Nickel-2.5 Molybdenum Stainless Steel for Cast and
Solution-Annealed Surgical Implant Applications |
|
ASTM B759 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN ALLOYS (UNS N06110) PIPE AND TUBE -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B691 + REDLINE - STANDARD SPECIFICATION FOR
IRON-NICKEL-CHROMIUM-MOLYBDENUM ALLOY (UNS N08367) ROD, BAR, AND WIRE -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B424 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM-COPPER ALLOYS PLATE, SHEET, AND STRIP -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM D4951-14 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic
Emission Spectrometry |
|
ASTM D4951-09 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic
Emission Spectrometry |
|
ASTM D4951-06 - Standard Test Method for Determination of
Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic
Emission Spectrometry |
|
JIS G 1257-5 - Iron and steel-Atomic absorption spectrometric
method - Part 5: Determination of molybdenum-Flame atomization after
decomposition with acids |
|
ASTM F688-00 - Standard Specification for Wrought Cobalt-35
Nickel-20 Chromium-10 Molybdenum Alloy Plate, Sheet, and Foil for
Surgical Implants(UNS R30035) |
|
ASTM E350-95(2000)e1 - Standard Test Methods for Chemical
Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot
Iron, and Wrought Iron |
|
ASTM A832/A832M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, CHROMIUM-MOLYBDENUM-VANADIUM - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B761-17(2021) - Standard Test Method for Particle Size
Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of
Gravity Sedimentation |
|
DIN ISO 5832-7 - Implants for surgery - Metallic materials -
Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron
alloy (ISO 5832-7:2016) |
|
ASTM A890 - STANDARD SPECIFICATION FOR CASTINGS, IRON-
CHROMIUM-NICKEL- MOLYBDENUM CORROSION- RESISTANT, DUPLEX
(AUSTENITIC/FERRITIC) FOR GENERAL APPLICATION |
|
ASTM E322-12 - Standard Test Method for Analysis of
Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence
Spectrometry (Withdrawn 2021) |
|
ASTM B430-97(2006)e1 - Standard Test Method for Particle
Size Distribution of Refractory Metal Powders and Related Compounds by
Turbidimetry (Withdrawn 2011) |
|
ASTM F745-95 - Standard Specification for 18 Chromium-12.5
Nickel-2.5 Molybdenum Stainless Steel for Cast and
Solution-Annealed Surgical Implant Applications |
|
ASTM F745-00 - Standard Specification for 18 Chromium-12.5
Nickel-2.5 Molybdenum Stainless Steel for Cast and
Solution-Annealed Surgical Implant Applications |
|
ISO 20649 - Infant formula and adult nutritionals -
Determination of chromium, selenium and molybdenum - Inductively
coupled plasma mass spectrometry (ICP-MS) |
|
DS/EN 10184 - Chemical analysis of ferrous materials -
Determination of phosphorus in non-alloyed steels and irons
- Molybdenum blue spectrophotometric method |
|
ASTM A542/A542M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and
Chromium-Molybdenum-Vanadium |
|
ASTM A209/A209M + REDLINE - STANDARD SPECIFICATION FOR
SEAMLESS CARBON-MOLYBDENUM ALLOY-STEEL BOILER AND SUPERHEATER TUBES -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM A533/A533M - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese- Molybdenum-Nickel |
|
ASTM B723 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COBALT-TUNGSTEN-IRON-SILICON ALLOY WELDED PIPE -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM G209 + REDLINE - STANDARD PRACTICE FOR DETECTING
MU-PHASE IN WROUGHT NICKEL-RICH, CHROMIUM, MOLYBDENUM-BEARING ALLOYS -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM E2594-09(2014) - Standard Test Method for Analysis of
Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
(Performance-Based Method) |
|
DS/EN ISO 5832-7 - Implants for surgery – Metallic materials –
Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron
alloy (ISO 5832-7:2016) |
|
ASTM A710/A710M-02 - Standard Specification for
Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium
Alloy Structural Steel Plates |
|
ASTM B709 + REDLINE - STANDARD SPECIFICATION FOR
IRON-NICKEL-CHROMIUM-MOLYBDENUM ALLOY (UNS N08028) PLATE, SHEET, AND
STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B729 + REDLINE - STANDARD SPECIFICATION FOR SEAMLESS
NICKEL-IRON-CHROMIUM-MOLYBDENUM-COPPER NICKEL ALLOY PIPE AND TUBE - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B620 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM ALLOY (UNS N08320) PLATE, SHEET, AND
STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM E354-93(2000)e1 - Standard Test Methods for Chemical
Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron,
Nickel, and Cobalt Alloys |
|
ASTM A736/A736M - Standard Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening Nickel-
Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel |
|
ASTM A533/A533M-16 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM A533/A533M-09 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM B386/B386M + REDLINE - STANDARD SPECIFICATION
FOR MOLYBDENUM AND MOLYBDENUM ALLOY PLATE, SHEET, STRIP,
FOIL, AND RIBBON - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM D4951-14(2019) - Standard Test Method for
Determination of Additive Elements in Lubricating Oils by Inductively Coupled
Plasma Atomic Emission Spectrometry |
|
ASTM A782/A782M-90(2001) - Standard Specification for
Pressure-Vessel Plates, Quenched-and-Tempered,
Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
|
ASTM A724/A724M-09(2018) - Standard Specification for
Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and
Tempered, for Welded Pressure Vessels |
|
ASTM F3213-17 - Standard for Additive Manufacturing -
Finished Part Properties - Standard Specification for Cobalt-28
Chromium-6 Molybdenum via Powder Bed Fusion |
|
ASTM A542/A542M-19 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and
Chromium-Molybdenum-Vanadium |
|
ASTM A890/A890M - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion- Resistant, Duplex (Austenitic/Ferritic)
for General Application |
|
ASTM A542/A542M-13 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and
Chromium-Molybdenum-Vanadium |
|
ASTM A542/A542M-09 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and
Chromium-Molybdenum-Vanadium |
|
ASTM B546 - Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy,
Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe |
|
ASTM A542/A542M-99 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and
Chromium-Molybdenum-Vanadium |
|
ASTM A533/A533M-09e1 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM B722-06(2016) - Standard Specification for
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333)
Seamless Pipe and Tube (Withdrawn 2021) |
|
ASTM A736/A736M-17 - Standard Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel |
|
ASTM A782/A782M-90(1996)e1 - Standard Specification for
Pressure-Vessel Plates, Quenched-and-Tempered,
Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
|
ASTM B890-07(2012) - Standard Test Method for Determination
of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray
Fluorescence Spectrometry |
|
ASTM A1048/A1048M - Standard Specification for Pressure
Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
for Elevated Temperature Service |
|
ASTM A890/A890M-18 - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM A890/A890M-13 - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM A890/A890M-12 - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM A890/A890M-10 - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic)
for General Application |
|
DSF/FPREN ISO 5832-7 - Implants for surgery – Metallic materials
– Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron
alloy (ISO 5832-7:2016) |
|
ASTM A890/A890M-99 - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM A542/A542M-99e1 - Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and
Chromium-Molybdenum-Vanadium |
|
ASTM A890/A890M-18a - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
DEF STAN 05-50: PART 37 - Methods for Testing Fuels, Lubricants
and Associated Products Part 37: The Assessment of the Abrasiveness
of Molybdenum Disulphide Powders |
|
ASTM A890/A890M-12a - Standard Specification for Castings,
Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM D8130 - Standard Test Method for Determination of
Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma
Atomic Emission Spectrometric Method |
|
ASTM B625-17 - Standard Specification for UNS N08925, UNS
N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS
R20033 Plate, Sheet, and Strip |
|
ASTM B755 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN ALLOYS (UNS N06110) PLATE, SHEET, AND
STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B546-19 - Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy,
Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe |
|
ASTM A710/A710M-02(2007) - Standard Specification for
Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium
Alloy Structural Steel Plates |
|
ASTM A710/A710M-02(2013) - Standard Specification for
Precipitation–Strengthened Low-Carbon
Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
|
ASTM C799-19 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Nuclear-Grade Uranyl Nitrate Solutions |
|
ASTM C799-12 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Nuclear-Grade Uranyl Nitrate Solutions |
|
ASTM B599 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM-NIOBIUM STABILIZED ALLOY PLATE, SHEET, AND
STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM A217/A217M-22 - Standard Specification for Steel
Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts,
Suitable for High-Temperature Service |
|
ASTM A958/A958M-17 - Standard Specification for Steel
Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements
Similar to Standard Wrought Grades |
|
ASTM A217/A217M-20 - Standard Specification for Steel
Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts,
Suitable for High-Temperature Service |
|
ASTM A533/A533M-93(1999) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM A710/A710M - Standard Specification for
Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium
(Niobium) Alloy Structural Steel Plates |
|
ASTM A533/A533M-09(2014) - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM A1048/A1048M-06 - Standard Specification for Pressure
Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
for Elevated Temperature Service |
|
ASTM F3301 - Standard for Additive Manufacturing – Post
Processing Methods – Standard Specification for Thermal Post-Processing Metal
Parts Made Via Powder Bed Fusion |
|
ASTM A735/A735M - Standard Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for
Moderate and Lower Temperature Service |
|
ASTM D8130-17 - Standard Test Method for Determination of
Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma
Atomic Emission Spectrometric Method |
|
FORD ESP-M1C216-A - GREASE, LITHIUM COMPLEX - LONG LIFE
LUBRICATION - MOLYBDENUM DISULFIDE ADDITIVE - CONSTANT VELOCITY
JOINT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM C799-99e1 - Standard Test Methods for Chemical, Mass
Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Nuclear-Grade Uranyl Nitrate Solutions |
|
ASTM A533/A533M-93(2004)e1 - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
FORD ESP-M1C216-A2 - GREASE, LITHIUM COMPLEX - LONG LIFE
LUBRICATION - MOLYBDENUM DISULFIDE ADDITIVE - CONSTANT VELOCITY
JOINT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
ASTM B814 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-IRON-MOLYBDENUM-TUNGSTEN ALLOY (UNS N06920) PLATE, SHEET, AND
STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM D7441-08(2013) - Standard Practice for Separation of
Beryllium from Other Metals in Digestion and Extraction Solutions from
Workplace Dust Samples (Withdrawn 2018) |
|
ASTM A710/A710M-19 - Standard Specification for
Precipitation-Strengthened Low-Carbon
Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel
Plates |
|
ASTM A890/A890M-99(2007) - Standard Specification for
Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM A735/A735M-03 - Standard Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for
Moderate and Lower Temperature Service |
|
ASTM A542/A542M-99(2004)e1 - Standard Specification for
Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum,
and Chromium-Molybdenum-Vanadium |
|
ASTM A735/A735M-99 - Standard Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for
Moderate and Lower Temperature Service |
|
ASTM E1070 + REDLINE - STANDARD TEST METHOD FOR
DETERMINATION OF PHOSPHORUS IN IRON ORES BY PHOSPHO-MOLYBDENUM-BLUE
SPECTROPHOTOMETRY - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B672 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM-COLUMBIUM STABILIZED ALLOY (UNS N08700) BAR
AND WIRE - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM F2066 + REDLINE - STANDARD SPECIFICATION FOR WROUGHT
TITANIUM-15 MOLYBDENUM ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS
R58150) - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM A890/A890M-99(2003) - Standard Specification for
Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application |
|
ASTM F3301-18 - Standard for Additive Manufacturing - Post
Processing Methods - Standard Specification for Thermal Post-Processing Metal
Parts Made Via Powder Bed Fusion |
|
ASTM B637-12 - Standard Specification for
Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and
Forging Stock for Moderate or High Temperature Service |
|
ASTM B637-18 - Standard Specification for
Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and
Forging Stock for Moderate or High Temperature Service |
|
ASTM B444-04 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon
Alloy (UNS N06219) Pipe and Tube |
|
ASTM B444-03 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM F2066/F2066M + RL - STANDARD SPECIFICATION FOR WROUGHT
TITANIUM-15 MOLYBDENUM ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS
R58150) - INCLUDES STANDARD+ REDLINE (PDF) |
|
ASTM B818 + REDLINE - STANDARD SPECIFICATION FOR
COBALT-CHROMIUM-NICKEL-MOLYBDENUM- TUNGSTEN ALLOY (UNS R31233) PLATE, SHEET
AND STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM F3301-18a - Standard for Additive Manufacturing - Post
Processing Methods - Standard Specification for Thermal Post-Processing Metal
Parts Made Via Powder Bed Fusion |
|
ASTM A782/A782M-06 - Standard Specification for
Pressure-Vessel Plates, Quenched-and-Tempered,
Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel (Withdrawn 2010) |
|
ASTM B726 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COBALT-TUNGSTEN-IRON-SILICON ALLOY (UNS N06333)
WELDED TUBE - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM C799-99(2005) - Standard Test Methods for Chemical,
Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of
Nuclear-Grade Uranyl Nitrate Solutions |
|
ASTM A588/A588M-19 - Standard Specification for
High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum
Yield Point, with Atmospheric Corrosion Resistance |
|
ASTM B637-12e1 - Standard Specification for
Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and
Forging Stock for Moderate or High Temperature Service |
|
ASTM A182/A182M-21 - Standard Specification for Forged or
Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves
and Parts for High-Temperature Service |
|
ASTM B434 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-MOLYBDENUM-CHROMIUM-IRON ALLOYS (UNS N10003, UNS N10242) PLATE, SHEET,
AND STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B444-00e1 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Pipe and Tube |
|
ASTM C1637-13 - Standard Test Method for the Determination
of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled
Plasma-Mass Spectroscopy (ICP-MS) Analysis |
|
ASTM A735/A735M-03(2007) - Standard Specification for
Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy
Steel, for Moderate and Lower Temperature Service |
|
FORD WSS-M1C259-A1 - GREASE, LITHIUM 12-HYDROXYSTEARATE, MOLYBDENUM DISULFIDE
ADDITIVE LONG LIFE LUBRICATION, CONSTANT VELOCITY JOINT ***TO BE USED WITH
FORD WSS-M99P1111-A*** |
|
ASTM D3610 + REDLINE - STANDARD TEST METHOD FOR TOTAL
COBALT IN ALUMINA-BASE COBALT- MOLYBDENUM CATALYST BY
POTENTIOMETRIC TITRATION METHOD - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM F1586-95 - Standard Specification for Wrought Nitrogen
Strengthened 21 Chromium—10 Nickel—3
Manganese—2.5 Molybdenum Stainless Steel Bar for Surgical Implants
(UNS S31675) |
|
ASTM F1586-02 - Standard Specification for Wrought Nitrogen
Strengthened 21 Chromium—10 Nickel—3
Manganese—2.5 Molybdenum Stainless Steel Bar for Surgical Implants
(UNS S31675) |
|
ASTM A543/A543M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, QUENCHED AND TEMPERED NICKEL-CHROMIUM-MOLYBDENUM -
INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM D8186 - Standard Test Method for Measurement of
Impurities in Graphite by Electrothermal Vaporization Inductively Coupled
Plasma Optical Emission Spectrometry (ETV-ICP OES) |
|
ASTM D7035-21 - Standard Test Method for Determination of
Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled
Plasma Atomic Emission Spectrometry (ICP-AES) |
|
ASTM D7035-16 - Standard Test Method for Determination of
Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled
Plasma Atomic Emission Spectrometry (ICP-AES) |
|
ASTM A302/A302M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, MANGANESE-MOLYBDENUM AND
MANGANESE-MOLYBDENUM-NICKEL - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM D8186-18 - Standard Test Method for Measurement of
Impurities in Graphite by Electrothermal Vaporization Inductively Coupled
Plasma Optical Emission Spectrometry (ETV-ICP OES) |
|
ASTM B443-00e1 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium
Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)*
Plate, Sheet, and Strip |
|
ASTM B444 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM B677 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM AND
IRON-NICKEL-CHROMIUM-MOLYBDENUM-COPPER SEAMLESS PIPE AND TUBE - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM F799 + REDLINE - STANDARD SPECIFICATION FOR COBALT-28
CHROMIUM-6 MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS
R31537, R31538, R31539) - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B722 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COBALT-TUNGSTEN-IRON-SILICON ALLOY (UNS N06333)
SEAMLESS PIPE AND TUBE - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B718 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COBALT-TUNGSTEN-IRON-SILICON ALLOY (UNS N06333)
PLATE, SHEET, AND STRIP - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM F75 + REDLINE - STANDARD SPECIFICATION FOR COBALT-28
CHROMIUM-6 MOLYBDENUM ALLOY CASTINGS AND CASTING ALLOY FOR SURGICAL
IMPLANTS (UNS R30075) - INCLUDES STANDARD + REDLINE (PDF) |
|
DS/EN 27627-4 - Hardmetals - Chemical analysis by flame atomic
absorption spectrometry - Part 4: Determination of molybdenum, titanium
and vanadium in contents from 0,01 to 0,5 % (m/m) |
|
ASTM B444-16 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM B443-00(2014) - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Plate, Sheet, and Strip |
|
ASTM B444-18 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM B444-06 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium
Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon
Alloy (UNS N06219) Pipe and Tube |
|
ASTM B423 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-IRON-CHROMIUM-MOLYBDENUM-COPPER ALLOY (UNS N08825, N08221, AND N06845)
SEAMLESS PIPE AND TUBE - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B443-00(2009) - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and
Strip |
|
ASTM B443-00(2005) - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and
Strip |
|
ASTM A735/A735M-12 - Standard Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for
Moderate and Lower Temperature Service (Withdrawn 2017) |
|
ASTM B444-16e1 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM C1301-95(2009)e1 - Standard Test Method for Major and
Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic
Emission Spectroscopy (ICP) and Atomic Absorption (AA) |
|
ASTM F1314 - Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium–13 Nickel–5
Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for
Surgical Implants (UNS S20910) |
|
ASTM B649-05 - Standard Specification for Ni-Fe-Cr-Mo-Cu-N
Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and
Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire |
|
ASTM A1048/A1048M-06(2011) - Standard Specification for
Pressure Vessel Forgings, Alloy Steel, Higher Strength
Chromium-Molybdenum-Tungsten for Elevated Temperature Service (Withdrawn
2016) |
|
ASTM F2229-21 - Standard Specification for Wrought,
Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless
Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
|
ASTM F2229-20 - Standard Specification for Wrought,
Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless
Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
|
ASTM B444-06(2011) - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM F1314-13 - Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium–13 Nickel–5
Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for
Surgical Implants (UNS S20910) |
|
ASTM F1314-18 - Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium-13 Nickel-5
Manganese-2.5 Molybdenum Stainless Steel Alloy Bar and Wire for
Surgical Implants (UNS S20910) |
|
ASTM E2994 - Standard Test Method for Analysis of Titanium
and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge
Atomic Emission Spectrometry (Performance-Based Method) |
|
ISO 27085 - Animal feeding stuffs — Determination of calcium,
sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese,
cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES |
|
ASTM A945/A945M-16(2021) - Standard Specification for
High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted
Sulfur for Improved Weldability, Formability, and Toughness |
|
ASTM E1019-18 - Standard Test Methods for Determination of
Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt
Alloys by Various Combustion and Inert Gas Fusion Techniques |
|
ASTM B639-02(2018) - Standard Specification for
Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816)
Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
|
DS/EN 15510 - Animal feeding stuffs – Determination of calcium,
sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese,
cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES |
|
ASTM F1314-13ae1 - Standard Specification for Wrought
Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless
Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
|
ASTM E2994-16 - Standard Test Method for Analysis of
Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow
Discharge Atomic Emission Spectrometry (Performance-Based Method) |
|
ASTM E2994-21 - Standard Test Method for Analysis of
Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow
Discharge Atomic Emission Spectrometry (Performance-Based Method) |
|
ASTM F1314/F1314M - Standard Specification for Wrought
Nitrogen Strengthened 22 Chromium–13 Nickel–5
Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for
Surgical Implants (UNS S20910) |
|
ASTM A736/A736M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, LOW-CARBON AGE-HARDENING NICKEL-COPPER-CHROMIUM-MOLYBDENUM-COLUMBIUM
ALLOY STEEL - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B625-21 - Standard Specification for Ni-Fe-Cr-Mo-Cu-N
Low-Carbon Alloy, Ni-Fe-Cr-Si Alloy, Cr-Ni-Fe-N Low-Carbon Alloy,
Fe-Ni-Cr-Mo-Cu-N Alloy, and Ni-Fe-Cr-Mo-N Alloy Plate, Sheet, and Strip |
|
ASTM B443 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM ALLOY AND
NICKEL-CHROMIUM-MOLYBDENUM-SILICON ALLOY PLATE, SHEET, AND STRIP - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM F1314-07 - Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium - 13 Nickel - 5 Manganese -
2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical
Implants (UNS S20910) |
|
ASTM F1314-01 - Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium - 13 Nickel - 5 Manganese -
2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical
Implants (UNS S20910) |
|
ASTM F1314-95 - Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium - 13 Nickel - 5 Manganese -
2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical
Implants (UNS S20910) |
|
ASTM F1314/F1314M-13a - Standard Specification for Wrought
Nitrogen Strengthened 22 Chromium–13 Nickel–5
Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for
Surgical Implants (UNS S20910) |
|
BS 5600-4.15 - Powder metallurgical materials and products.
Methods of testing and chemical analysis of hardmetals. Determination of
contents of metallic elements by X-ray fluorescence: fusion method |
|
DS/EN 14083 - Foodstuffs - Determination of trace elements -
Determination og lead, cadmium, chromium and molybdenum by graphite
furnace atomic absorption spectrometry (GFAAS) after pressure digestion |
|
ASTM A736/A736M-03 - Standard Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium
and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
|
BS 5600-4.10 - Powder metallurgical materials and products.
Methods of testing and chemical analysis of hardmetals. Determination of
contents of metallic elements by X-ray fluorescence: solution method |
|
ASTM E2371-21 - Standard Test Method for Analysis of
Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled
Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
|
ASTM A533/A533M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, QUENCHED AND TEMPERED,
MANGANESE-MOLYBDENUM AND MANGANESE-MOLYBDENUM-NICKEL - INCLUDES STANDARD
+ REDLINE (PDF) |
|
ASTM E2371-13 - Standard Test Method for Analysis of
Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled
Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
|
DS/EN ISO 21424 - Milk, milk products, infant formula and adult
nutritionals – Determination of minerals and trace elements – Inductively
coupled plasma mass spectrometry (ICP-MS) method (ISO 21424:2018) |
|
ASTM E2371-21a - Standard Test Method for Analysis of
Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled
Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
|
ASTM A890/A890M + REDLINE - STANDARD SPECIFICATION FOR
CASTINGS, IRON-CHROMIUM-NICKEL-MOLYBDENUM CORROSION-RESISTANT, DUPLEX
(AUSTENITIC/FERRITIC) FOR GENERAL APPLICATION - INCLUDES STANDARD + REDLINE
(PDF) |
|
ASTM A542/A542M + REDLINE - STANDARD SPECIFICATION FOR
PRESSURE VESSEL PLATES, ALLOY STEEL, QUENCHED-AND- TEMPERED,
CHROMIUM-MOLYBDENUM, AND CHROMIUM- MOLYBDENUM-VANADIUM - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B166-00 - Standard Specification Nickel-Chromium-Iron
Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire |
|
ASTM B166-01 - Standard Specification Nickel-Chromium-Iron
Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire |
|
ASTM A736/A736M-03(2007) - Standard Specification for
Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium
and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
|
ASTM A736/A736M-88(2000) - Standard Specification for
Pressure Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium and
Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
|
ASTM C1441 - Standard Test Method for the Analysis of
Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing
Compounds in Uranium Hexafluoride Via Fourier-Transform Infrared (FTIR) Spectroscopy |
|
ASTM B166-06 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Rod, Bar, and Wire |
|
ASTM B166-04 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Rod, Bar, and Wire |
|
DIN EN 15510 - Animal feeding stuffs - Methods of sampling and
analysis - Determination of calcium, sodium, phosphorus, magnesium,
potassium, iron, zinc, copper, manganese, cobalt, molybdenum and
lead by ICP-AES |
|
ASTM D7417-17 - Standard Test Method for Analysis of
In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic
Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle
Counter) |
|
ASTM A710/A710M + REDLINE - STANDARD SPECIFICATION FOR
PRECIPITATION-STRENGTHENED LOW-CARBON
NICKEL-COPPER-CHROMIUM-MOLYBDENUM-COLUMBIAN (NIOBIUM) ALLOY STRUCTURAL STEEL
PLATES - INCLUDES STANDARD + REDLINE (PDF) |
|
This part of ISO 7627 specifies the method to be used for the
determination of molybdenum, titanium and vanadium contents of
hardmetals within the range 0,01 to 0,5 % (m/m) by flame atomic absorption spectrometry. |
|
ASTM B167-06 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Seamless Pipe and Tube |
|
ASTM B168-06 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Plate, Sheet, and Strip |
|
ASTM B167-05 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Seamless Pipe and Tube |
|
ASTM B168-00 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Plate, Sheet, and Strip |
|
ASTM B167-00 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Seamless Pipe and Tube |
|
ASTM B167-01 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Seamless Pipe and Tube |
|
ASTM B168-01 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Plate, Sheet, and Strip |
|
ASTM B167-05a - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Seamless Pipe and Tube |
|
ASTM B168-01(2005) - Standard Specification
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS
N06617) Plate, Sheet, and Strip |
|
ASTM B166-08 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617) Rod, Bar, and Wire |
|
ASTM B446 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon
Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS
N06650) Rod and Bar |
|
ASTM B649-95 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925,
UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar
and Wire |
|
ASTM B649-04 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS
N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS
R20033) Bar and Wire |
|
ASTM B649-02 - Standard Specification for Ni-Fe-Cr-Mo-Cu
Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS
N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS
R20033) Bar and Wire |
|
ASTM B168-08 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617) Plate, Sheet, and Strip |
|
ASTM B167-08 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617) Seamless Pipe and Tube |
|
ASTM B446-19 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar |
|
ASTM B446-03 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
|
ASTM B446-02 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
|
ASTM B446-00e1 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon
Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS
N06650)* Rod and Bar |
|
ASTM B444 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM ALLOYS (UNS N06625 AND UNS N06852) AND NICKEL-CHROMIUM-MOLYBDENUM-SILICON
ALLOY (UNS N06219) PIPE AND TUBE - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B446-03(2014) - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar |
|
ASTM B649-06 - Standard Specification for Ni-Fe-Cr-Mo-Cu-N
Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and
Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N
Alloy (UNS N08936) Wire |
|
ASTM B446-03(2008) - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
|
ASTM B446-03(2008)e1 - Standard Specification for
Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and
Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
|
ASTM B834-95 - Standard Specification for Pressure
Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS
N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe
Flanges, Fittings, Valves, and Parts |
|
ASTM B834-13 - Standard Specification for Pressure
Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS
N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe
Flanges, Fittings, Valves, and Parts |
|
ASTM B574-06 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum,
Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B574-05 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum,
Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B574-04 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum,
Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
DS/EN 27627-5 - Hardmetals - Chemical analysis by flame atomic
absorption spectrometry - Part 5: Determination of cobalt, iron, manganese,
molybden, manganese, molybdenum, nickel, titanium and vanadium in
contents from 0,5 to 2 % (m/m) |
|
ASTM B649-06(2016) - Standard Specification for
Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354,
and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and
Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
|
ASTM B649-06(2011) - Standard Specification for
Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and
UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and
Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
|
ASTM B574-06e1 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum,
Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM F1314/F1314M + RL - STANDARD SPECIFICATION FOR WROUGHT
NITROGEN STRENGTHENED 22 CHROMIUM�-13
NICKEL-5 MANGANESE-2.5 MOLYBDENUM STAINLESS STEEL ALLOY BAR AND
WIRE FOR SURGICAL IMPLANTS (UNS S20910) - INCLUDES STANDARD + REDLINE (PDF) |
|
ASTM B834-95(2009) - Standard Specification for Pressure
Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS
N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe
Flanges, Fittings, Valves, and Parts |
|
ASTM B834-95(2003) - Standard Specification for Pressure
Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS
N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe
Flanges, Fittings, Valves, and Parts |
|
ASTM B166 - Standard Specification for
Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys,
Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel- Iron-Chromium-Tungsten
Alloy, and Nickel-Chromium- Molybdenum-Copper Alloy Rod, Bar, and Wire |
|
ASTM F1314 + REDLINE - STANDARD SPECIFICATION FOR WROUGHT
NITROGEN STRENGTHENED 22 CHROMIUM�1 -
13 NICKEL - 5 MANGANESE - 2.5 MOLYBDENUM STAINLESS STEEL ALLOY BAR
AND WIRE FOR SURGICAL IMPLANTS (UNS S20910) - INCLUDES STANDARD + REDLINE
(PDF) |
|
ASTM B649-17 - Standard Specification for Ni-Fe-Cr-Mo-Cu-N
Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08034, UNS N08354, and
UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N
Alloy (UNS N08936) Wire |
|
ASTM B166-19 - Standard Specification for
Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys,
Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten
Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire |
|
ASTM B546-98 - Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330
and UNS N08332),Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025),
and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM B546-04 - Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330
and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025),
and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM B575-04 - Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip |
|
ASTM B166 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-ALUMINUM ALLOY, NICKEL-CHROMIUM-IRON ALLOYS,
NICKEL-CHROMIUM-COBALT-MOLYBDENUM ALLOY, NICKEL-IRON-CHROMIUM-TUNGSTEN
ALLOY, AND NICKEL-CHROMIUM-MOLYBDENUM-COPPER ALLOY ROD, BAR, AND WIRE |
|
ASTM B167 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-ALUMINUM ALLOYS (UNS N06699), NICKEL-CHROMIUM-IRON ALLOYS
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, AND N06696),
NICKEL-CHROMIUM-COBALT-MOLYBDENUM ALLOY (UNS N06617), |
|
ASTM B168 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-ALUMINUM ALLOYS (UNS N06699), NICKEL-CHROMIUM-IRON ALLOYS
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, AND N06696),
NICKEL-CHROMIUM-COBALT-MOLYBDENUM ALLOY (UNS N06617), |
|
ASTM B546-04(2014) - Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330
and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025),
and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM B546-04(2009) - Standard Specification for Electric
Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330
and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025),
and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
|
ASTM D5185-09 - Standard Test Method for Determination of
Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and
Determination of Selected Elements in Base Oils by Inductively Coupled Plasma
Atomic Emission Spectrometry (ICP-AES) |
|
ASTM B574-99a - Spec for Low-Carbon
Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B575-99a - Spec for Low-Carbon
Nickel-Molydbdenum-Chromium,Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, Low-Carbon
Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Plate |
|
ASTM B575-06 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip |
|
ASTM B166-11 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar, |
|
ASTM B462-10 - Standard Specification for Forged or Rolled
UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS
N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS
N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, |
|
ASTM D6357-11 - Test Methods for Determination of Trace
Elements in Coal, Coke, & Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled
Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM D6357-04 - Test Methods for Determination of Trace
Elements in Coal, Coke, & Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled
Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM B575-10 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon
Nickel-Molybdenum-Chromium |
|
ASTM B168-11 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate,
Sheet, |
|
ASTM B167-11 - Specification for Nickel-Chromium-Iron
Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and
N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten
Alloy (UNS N06674) Seamless Pipe and Tube |
|
ASTM D6357-00a - Test Methods for Determination of Trace
Elements in Coal, Coke, & Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled
Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
|
ASTM B574 + REDLINE - STANDARD SPECIFICATION FOR LOW-CARBON
NICKEL-CHROMIUM-MOLYBDENUM, LOW-CARBON NICKEL-MOLYBDENUM-CHROMIUM, LOW-CARBON
NICKEL- MOLYBDENUM-CHROMIUM-TANTALUM, LOW-CARBON
NICKEL-CHROMIUM- MOLYBDENUM-COPPER, AND LOW-CARBON
NICKEL-CHROMIUM-MOLYBDENUM |
|
ASTM B574-10 - Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B446 + REDLINE - STANDARD SPECIFICATION FOR
NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM ALLOY (UNS N06625),
NICKEL-CHROMIUM-MOLYBDENUM-SILICON ALLOY (UNS N06219), AND
NICKEL-CHROMIUM-MOLYDBENUM-TUNGSTEN ALLOY (UNS N06650) ROD AND BAR - INCLUDES
STANDARD + REDLINE (PDF) |
|
ASTM B575 + REDLINE - STANDARD SPECIFICATION FOR LOW-CARBON
NICKEL-CHROMIUM-MOLYBDENUM, LOW-CARBON NICKEL-CHROMIUM-MOLYBDENUM-COPPER, LOW-CARBON
NICKEL- CHROMIUM-MOLYBDENUM-TANTALUM, LOW-CARBON
NICKEL-CHROMIUM- MOLYBDENUM-TUNGSTEN, AND LOW-CARBON
NICKEL-MOLYBDENUM-CHROMIUM |
|
ASTM B574 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon
Nickel- Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-
Chromium-Molybdenum-Copper, and Low-Carbon Nickel-
Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B574-18 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B574-15 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B574-17 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum,
Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, and Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
|
ASTM B167-11(2016) - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless
Pipe and Tube |
|
ASTM B834 + REDLINE - STANDARD SPECIFICATION FOR PRESSURE
CONSOLIDATED POWDER METALLURGY IRON-NICKEL-CHROMIUM-MOLYBDENUM (UNS
N08367), NICKEL-CHROMIUM- MOLYBDENUM-COLUMBIUM (NB) (UNS N06625),
NICKEL-CHROMIUM-IRON ALLOYS (UNS N06600 AND N06690), AND NICKEL-CHROMIUM-IRON-COLUMBIUM |
|
ASTM B168-11(2016) - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate,
Sheet, and Strip |
|
ASTM B575-14 - Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon
Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
|
ASTM B575-15 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon
Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
|
ASTM B575 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel- Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-
Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel- Molybdenum-Chromium
Alloy Plate, Sheet, and Strip |
|
ASTM B575-17 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon
Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
|
ASTM B575-15e1 - Standard Specification for Low-Carbon
Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,
Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon
Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon
Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
|
ASTM D6357 - Standard Test Methods for Determination of
Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission Spectrometry,
Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic
Absorption Spectrometry |
|
ASTM D6357-21 - Standard Test Methods for Determination of
Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission Spectrometry,
Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic
Absorption Spectrometry |
|
ASTM D6357-19 - Standard Test Methods for Determination of
Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission Spectrometry,
Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic
Absorption Spectrometry |
|
ASTM D6357-21b - Standard Test Methods for Determination of
Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission Spectrometry,
Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic
Absorption Spectrometry |
|
ASTM D6357-21a - Standard Test Methods for Determination of
Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization
Processes by Inductively Coupled Plasma Atomic Emission Spectrometry,
Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic
Absorption Spectrometry |
|
ASTM B168-18 - Standard Specification for
Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),
Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), Plate, Sheet, and Strip |
|
ASTM B166-18 - Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693,
N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy
(UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and
Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Rod, Bar, and Wire |
|
ASTM B834 - Standard Specification for Pressure
Consolidated Powder Metallurgy Iron-Nickel- Chromium-Molybdenum (UNS
N08367), Nickel-Chromium- Molybdenum-Columbium (Nb) (UNS N06625),
Nickel- Chromium-Iron Alloys (UNS N06600 and N06690), and
Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe
Flanges, Fittings, Valves, and Parts |
|
ASTM B834-17 - Standard Specification for Pressure Consolidated
Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367),
Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron
Alloys (UNS N06600 and N06690), and
Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges,
Fittings, Valves, and Parts |
|
ASTM B834-15 - Standard Specification for Pressure
Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS
N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625),
Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and
Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe
Flanges, Fittings, Valves, and Parts |
|
ASTM B167-18 - Standard Specification for
Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),
Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and
Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube |
|
ASTM B167 - Standard Specification for
Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel- Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel- Iron-Chromium-Tungsten
Alloy (UNS N06674), and Nickel- Chromium-Molybdenum-Copper Alloy (UNS N06235)
Seamless Pipe and Tube |
|
ASTM B168-19 - Standard Specification for
Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),
Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and
Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip |
|
ASTM B168 - Standard Specification for
Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel- Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),
Nickel- Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-
Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-
Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip |
|
ASTM B462-10e1 - Standard Specification for Forged or
Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS
N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS
N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, UNS
N06025, UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts
for Corrosive High-Temperature Service |
AVAILABLE AT FOLLOWING LOCATION :-
Adilabad, Agartala, Agra, Ahmedabad, Ahmednagar, Ajmer, Akola , Aligarh , Alipore , Allahabad , Alleppey , Almora , Alwar , Alwaye , Amalapuram , Amaravati , Ambala , Amreli , Amritsar , Anakapalle , Anand , Anantapur , Andhra Pradesh , Anna Road , Arakkonam , Arunachal Pradesh , Asansol , Aska , Assam , Aurangabad , Azamgarh , Bagalkot , Bahraich , Balaghat , Balangir , Balasore , Ballia , Banasanktha , Banda , Bangalore , Bankura , Barabanki , Barabazaar , Baramulla , Barasat , Bardoli , Bareilly , Barmer , Bastar , Basti , Beawar , Beed , Begusarai , Belgaum , Bellary , Berhampur , Bhadrak , Bhagalpur , Bharatpur , Bharuch , Bhatinda , Bhavnagar , Bhilwara , Bhimavaram , Bhiwani , Bhojpur , Bhopal , Bhubaneswar , Bhusaval , Bidar , Bihar , Bijapur , Bijnor , Bikaner , Bilaspur , Birbhum , Budaun , Bulandshahar , Buldana , Burdwan , Cachar , Calcutta , Calicut , Cannanore , Chamba , Chamoli , Chandigarh , Chandrapur , Changanacherry , Channapatna , Chattisgarh , Chengalpattu , Chennai , Chhatarpur , Chhindwara , Chikmagalur , Chikodi , Chitradurga , Chittoor , Chittorgarh , Churu , Coimbatore , Contai , Cooch Behar , Cuddalore , Cuddapah , Cuttack , Darbhanga , Darjeeling , Darrang , Dehra Gopipur , Dehradun , Delhi , Delhi , Deoria , Dhanbad , Dharamsala , Dharmanagar , Dharmapuri , Dharwad , Dhenkanal , Dholpur , Dhule , Dibrugarh , Dinajpur , Dindigul , divisionname , Dungarpur , Durg , Eluru , Ernakulam , Erode , Etah , Etawah , Faizabad , Faridabad , Faridkot , Fatehgarh , Fatehpur , Ferozpur , Gadag , Gandhinagar , Gaya , Ghaziabad , Ghazipur , Giridih , Goa , Goalpara , Gokak , Gonda , Gondal , Gorakhpur , Gudivada , Gudur , Gujarat , Gulbarga , Guna , Guntur , Gurdaspur , Gurgaon , Guwahati , Gwalior , Hamirpur , Hanamkonda , Hardoi , Haryana , Hassan , Haveri , Hazaribagh , Himachal Pradesh , Hindupur , Hissar , Hooghly , Hoshangabad , Hoshiarpur , Howrah , Hyderabad , Idukki , Indore , Irinjalakuda , Jabalpur , Jaipur , Jalandhar , Jalgaon , Jalpaiguri , Jammu , Jammu kashmir , Jamnagar , Jaunpur , Jhansi , Jharkhand , Jhunjhunu , Jodhpur , Junagadh , Kakinada , Kalahandi , Kanchipuram , Kanniyakumari , Kanpur , Kapurthala , Karaikudi , Karimnagar , Karnal , Karnataka , Karur , Karwar , Kasaragod , Keonjhar , Kerala , Khammam , Khandwa , Kheda , Kheri , Kodagu , Kolar , Kolhapur , Kolkata , Koraput , Kota , Kottayam , Kovilpatti , Krishnagiri , Kumbakonam , Kurnool , Kurukshetra , Kutch , Lakshadweep , Leh , Lucknow , Ludhiana , Machilipatnam , Madhubani , Madhya Pradesh , Madurai , Mahabubnagar , Maharashtra , Mahesana , Mainpuri , Malda , Malegaon , Mandi , Mandsaur , Mandya , Mangalore , Manipur , Manjeri , Mathura , Mavelikara , Mayiladuthurai , Mayurbhanj , Medak , Meerut , Meghalaya , Midnapore , Mirzapur , Mizoram , Monghyr , Moradabad , Morena , Mumbai , Murshidabad , Muzaffarnagar , Muzaffarpur , Mysore , Nadia , Nagaland , Nagaon , Nagapattinam , Nagaur , Nagpur , Nainital , Nalanda , Nalbari , Nalgonda , Namakkal , Nanded , Nandyal , Nanjangud , Narasaraopet , Nasik , Navsari , Nawadha , Nellore , New Delhi , New Mumbai , Nilgiris , Nizamabad , North Eastern , Odisha , Osmanabad , Ottapalam , Palamau , Palghat , Pali , Panchmahals , Pandharpur , Parvathipuram , Patan , Pathanamthitta , Patiala , Patna , Pattukottai , Pauri , Peddapalli , Pharbhani , Phulbani , Pithoragarh , Pollachi , Pondicherry , Porbandar , Prakasam , Pratapgarh , Proddatur , Pudukkottai , Pune , Punjab , Puri , Purnea , Purulia , Puttur , Quilon , Rae Bareilly , Raichur , Raigad , Raigarh , Raipur , Rajahmundry , Rajasthan , Rajkot , Rajouri , Ramanathapuram , Rampur Bushahr , Ranchi , Ratlam , Ratnagiri , Rewa , Rohtak , Rohtas , Sabarkantha , Sagar , Saharanpur , Saharsa , Salem , Samastipur , Sambalpur , Sangareddy , Sangli , Sangrur , Santhal Parganas , Saran , Satara , Sawaimadhopur , Secunderabad , Sehore , Shahdol , Shahjahanpur , Shimla , Shimoga , Shrirampur , Sibsagar , Sikar , Sikkim , Sindhudurg , Singhbhum , Sirohi , Sirsi , Sitamarhi , Sitapur , Sivaganga , Siwan , Solan , Solapur , Sonepat , Sriganganagar , Srikakulam , Srinagar , Srirangam , Sultanpur , Sundargarh , Surat , Surendranagar , Suryapet , Tadepalligudem , Tambaram , Tamilnadu , Tamluk , Tehri , Tenali , Thalassery , Thane , Thanjavur , Theni , Tinsukia , Tiruchirapalli , Tirunelveli , Tirupati , Tirupattur , Tirupur , Tirur , Tiruvalla , Tiruvannamalai , Tonk , Trichur , Trivandrum , Tumkur , Tuticorin , Udaipur , Udhampur , Udupi , Ujjain , Una , Uttar Pradesh , Uttarakhand , Vadakara , Vadodara , Vaishali , Valsad , Varanasi , Vellore , Vidisha , Vijayawada , Virudhunagar , Visakhapatnam , Vizianagaram , Vriddhachalam , Wanaparthy , Warangal , Wardha , West Bengal , Yeotmal , Bangalore , Hyderabad , Chennai , Kolkata , Jaipur , Indore , Thane , Pimpri-Chinchwad , Nashik , Kalyan-Dombivli , Vasai-Virar , Varanasi , Navi Mumbai , Hubli–Dharwad , Tiruchirappalli , Tiruppur , Salem , Mira-Bhayandar , Bhiwandi , Amravati , Noida , Jamshedpur , Bhilai , Cuttack , Firozabad , Kochi , Durgapur , Rourkela , Loni , Siliguri , Ulhasnagar , Sangli-Miraj & Kupwad , Ambattur , Thiruvananthapuram , Davanagere , Kozhikode , Maheshtala , Rajpur Sonarpur , Bokaro , South Dumdum , Gopalpur , Bhatpara , Panihati , Latur , Korba , Kollam , Avadi , Kadapa , Kamarhati , Rampur , Thrissur , Bardhaman , Kulti , Parbhani , Ozhukarai , Bihar Sharif , Panipat , Bally , Aizawl , Dewas , Ichalkaranji , Bathinda , Jalna , Kirari Suleman Nagar , Purnia , Satna , Mau , Sonipat , Farrukhabad , Imphal , Hapur , Arrah , Ambarnath , North Dumdum , New Delhi , Gandhidham , Baranagar , Tiruvottiyur , Thoothukudi , Ramagundam , Silchar , Haridwar , Vijayanagaram , Nagercoil , Sri Ganganagar , Karawal Nagar , Mango , Bulandshahr , Uluberia , Katni , Sambhal , Singrauli , Nadiad , Naihati , Yamunanagar , Bidhannagar , Pallavaram , Munger , Panchkula , Burhanpur , Raurkela Industrial Township , Kharagpur , Hospet , Nangloi Jat , Ongole , Deoghar , Chapra , Haldia , Amroha , Bhind , Bhalswa Jahangir Pur , Madhyamgram , Berhampore , Morbi , Raebareli , Khora, Ghaziabad , Bhusawal , Orai , Phusro , Mehsana , Raiganj , Sirsa , Danapur , Serampore , Sultan Pur Majra , Panvel , Shivpuri , Surendranagar Dudhrej , Unnao , Chinsurah , Alappuzha , Adoni , Katihar , Mahbubnagar , Jorhat , Sasaram , Hajipur , Bongaigaon , Dehri , Madanapalle , Bettiah , Ramgarh , Guntakal , Motihari , Dharmavaram , Medininagar , Phagwara , Hosur , Miryalaguda , Tadipatri , Kishanganj , Jamalpur , Kavali , Buxar , Tezpur , Jehanabad , Gangtok , Assam , Bihar , Chattisgarh , Delhi , Gujarat , Haryana , Himachal Pradesh , Jammu kashmir , Jharkhand , Karnataka , Kerala , Madhya Pradesh , Maharashtra , Odisha , Punjab , Rajasthan , Tamilnadu , Uttar Pradesh , Uttarakhand , west Bengal
WE EXPORT TO FOLLOWING COUTRIES
Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen , Zambia , Zimbabwe , Estonia , Nepal
