Top EN 10088 SS sheet plate coil strip,EN 10088-3 ss bar & rod,EN 10084 round bars Products in Kolkata at best prices

EN 10088-3 X6CrNiCuS18-9-2 Stainless Steel Rod

EN 10088-3 X6CrNiCuS18-9-2 is an austenitic stainless steel grade with copper and sulfur additions, designed to provide excellent corrosion resistance, good machinability, and moderate mechanical strength. The copper enhances resistance to oxidizing acids, while sulfur improves machinability for precision components. Supplied in rod form, X6CrNiCuS18-9-2 stainless steel is suitable for chemical, marine, and general engineering applications requiring both corrosion resistance and ease of machining. This grade conforms to the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiCuS18-9-2 stainless steel rods. All materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy in full compliance with EN 10088-3 specifications. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiCuS18-9-2): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel • Cu – Copper addition for improved corrosion resistance • S – Sulfur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 1.5 – 3.0 • Sulfur (S): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 200 HB Key Features: • Austenitic stainless steel with copper and sulfur alloying • Excellent corrosion resistance in oxidizing acids and mild environments • Improved machinability due to sulfur addition • Good toughness and ductility • Easy to weld and fabricate with proper procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X6CrNiCuS18-9-2 stainless steel rod combines corrosion resistance with enhanced machinability and mechanical stability. Copper improves resistance to oxidizing acids, while sulfur allows precision machining for industrial and chemical applications. Applications: • Chemical processing equipment and fittings • Marine and seawater handling components • Precision shafts, pins, and fasteners • Industrial machinery and tooling components • General engineering and fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrNiCuS18-9-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, enhanced machinability, and full EN 10088-3 compliance, X6CrNiCuS18-9-2 stainless steel rod is a reliable choice for demanding industrial, chemical, and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X6CrNiNb18-10 Stainless Steel Bar

EN 10088-3 X6CrNiNb18-10 is a stabilized austenitic stainless steel grade with niobium addition for improved resistance to intergranular corrosion and excellent mechanical performance. The combination of chromium, nickel, and niobium provides high corrosion resistance, good toughness, and reliable performance in welded and fabricated components. Supplied in bar form, X6CrNiNb18-10 stainless steel is widely used in chemical, petrochemical, marine, and industrial applications where stability and durability are critical. This grade complies with the EN 10088-3 standard for stainless steel bars and rods. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiNb18-10 stainless steel bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiNb18-10): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel • Nb – Niobium stabilized for intergranular corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 11.0 • Niobium (Nb): 0.15 – 0.45 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 200 HB Key Features: • Austenitic stainless steel stabilized with niobium • Excellent resistance to intergranular corrosion • Good toughness and ductility over a wide temperature range • High corrosion resistance in chemical and marine environments • Good weldability and formability • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X6CrNiNb18-10 stainless steel bar combines excellent corrosion resistance, stabilization against intergranular attack, and reliable mechanical performance. Its niobium stabilization ensures structural integrity in welded components and long-term service in aggressive environments. Applications: • Chemical and petrochemical equipment • Marine and offshore structural components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • General fabrication and engineering applications Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X6CrNiNb18-10 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, niobium stabilization, and full EN 10088-3 compliance, X6CrNiNb18-10 stainless steel bar is a reliable material for demanding industrial and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X14CrMoS17 Stainless Steel Bar

EN 10088-3 X14CrMoS17 is a free-machining martensitic stainless steel grade designed for applications requiring good strength, enhanced machinability, improved wear resistance, and moderate corrosion resistance. The addition of molybdenum improves hardenability and resistance to pitting, while sulphur enhances machinability, making this grade ideal for precision machining and mass-produced components. Supplied in bar and rod form, X14CrMoS17 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X14CrMoS17 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X14CrMoS17): • X – High-alloy steel • 14 – Approx. 0.14% carbon content • Cr17 – Approx. 17% chromium • Mo – Molybdenum addition for improved strength and corrosion resistance • S – Sulphur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.30 – 0.60 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: 10 – 14% • Hardness: Can be increased by quenching and tempering Key Features: • Free-machining martensitic stainless steel • Improved machinability due to sulphur addition • Good strength and wear resistance • Better pitting resistance compared to standard 13% Cr grades • Heat-treatable for enhanced mechanical performance • Suitable for precision-machined components Material Characteristics: EN 10088-3 X14CrMoS17 stainless steel rod and bar offers a balanced combination of strength, machinability, and corrosion resistance. Its martensitic structure allows effective heat treatment while maintaining excellent machining performance for high-volume production. Applications: • Precision-machined shafts and pins • Valve and pump components • Fasteners and fittings • Automotive and engineering parts • Industrial machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X14CrMoS17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced machinability, reliable strength, and improved corrosion resistance, X14CrMoS17 stainless steel bar is a dependable choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X20Cr13 Stainless Steel Bar

EN 10088-3 X20Cr13 is a martensitic stainless steel grade developed for applications requiring higher strength, hardness, and wear resistance along with moderate corrosion resistance. With increased carbon content compared to X12Cr13, this grade can achieve higher hardness levels after heat treatment, making it suitable for demanding mechanical and tooling applications. Supplied in bar and rod form, X20Cr13 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X20Cr13 stainless steel rods and bars. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 specifications, ensuring consistent quality, precise chemical composition, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X20Cr13): • X – High-alloy steel • 20 – Approx. 0.20% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.16 – 0.25 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 550 MPa • Elongation: 10 – 14% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with higher carbon content • Excellent hardness and wear resistance after heat treatment • Moderate corrosion resistance in atmospheric and mildly corrosive environments • Good machinability in annealed condition • Suitable for high-stress mechanical components Material Characteristics: EN 10088-3 X20Cr13 stainless steel rod and bar offers high strength and hardness with reliable corrosion resistance. Its martensitic structure enables effective heat treatment, making it ideal for components subjected to heavy loads and wear. Applications: • Shafts, spindles, and axles • Valve parts and pump components • Tooling and mechanical parts • Turbine and power plant components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X20Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high hardness potential, good mechanical strength, and dependable corrosion resistance, X20Cr13 stainless steel bar is a strong choice for demanding engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X2CrNiMnMoN25-18-6-5 Stainless Steel Rod

EN 10088-3 X2CrNiMnMoN25-18-6-5 is a high-alloy austenitic stainless steel grade developed for demanding environments requiring excellent corrosion resistance, high mechanical strength, and improved resistance to stress corrosion cracking. The combined alloying of chromium, nickel, manganese, molybdenum, and nitrogen enhances resistance to pitting, crevice corrosion, and general corrosion, particularly in chloride-containing environments. Supplied in rod and bar form, X2CrNiMnMoN25-18-6-5 stainless steel is suitable for critical industrial and chemical processing applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMnMoN25-18-6-5): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMnMoN25-18-6-5 – Approx. 25% chromium, 18% nickel, 6% manganese, 5% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 17.0 – 19.0 • Manganese (Mn): 5.0 – 7.0 • Molybdenum (Mo): 4.5 – 5.5 • Nitrogen (N): 0.20 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • High-alloy austenitic stainless steel with enhanced strength • Excellent resistance to pitting and crevice corrosion • Improved resistance to stress corrosion cracking • Good toughness and ductility • Suitable for aggressive chloride-containing environments • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rod and bar provides a strong combination of corrosion resistance, high strength, and durability. The nitrogen-alloyed austenitic structure ensures stable mechanical performance and long service life in aggressive chemical and industrial environments. Applications: • Chemical and petrochemical processing equipment • Offshore and marine components • Desalination and seawater systems • Heat exchangers, pressure vessels, and shafts • Industrial and structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMnMoN25-18-6-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high alloy content, and dependable mechanical performance, X2CrNiMnMoN25-18-6-5 stainless steel rod is an ideal choice for demanding industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X2CrNiMnMoN25-18-6-5 Stainless Steel Rod

EN 10088-3 ss bar & rod

EN 10088-3 X1CrNiMoCuN25-25-5 Stainless Steel Rod

EN 10088-3 X1CrNiMoCuN25-25-5 is a high-alloy austenitic stainless steel grade engineered for extremely aggressive environments where superior resistance to corrosion, pitting, crevice attack, and stress corrosion cracking is essential. The high chromium and nickel content, combined with molybdenum, copper, and nitrogen, provides excellent performance in acidic, chloride-rich, and chemically aggressive media. Supplied in rod and bar form, X1CrNiMoCuN25-25-5 stainless steel is commonly used in critical chemical and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN25-25-5): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN25-25-5 – Approx. 25% chromium, 25% nickel, 5% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 4.5 – 6.0 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with outstanding corrosion resistance • Excellent resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-rich environments • High ductility and toughness • Very good weldability • Suitable for severe chemical processing applications Material Characteristics: EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rod and bar offers exceptional resistance to a wide range of aggressive chemicals while maintaining excellent mechanical properties. Its austenitic microstructure ensures long service life, high toughness, and reliability under demanding service conditions. Applications: • Chemical and petrochemical processing equipment • Acid production and handling systems • Offshore and marine components • Desalination and seawater treatment plants • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN25-25-5 stainless steel rod is an ideal choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X2CrMoTiS18-2 Stainless Steel Rod

EN 10088-3 X2CrMoTiS18-2 is a free-machining ferritic stainless steel grade stabilized with titanium and alloyed with molybdenum to enhance corrosion resistance and machinability. The addition of sulphur significantly improves cutting performance, making this grade suitable for high-speed machining and precision components. X2CrMoTiS18-2 offers good resistance to general corrosion, oxidation, and mild chemical environments, along with stable mechanical properties. Supplied in rod and bar form, this grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrMoTiS18-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable machinability, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrMoTiS18-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Mo2 – Approx. 2% molybdenum • Ti – Titanium stabilized • S – Sulphur added for improved machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Molybdenum (Mo): 1.5 – 2.5 • Titanium (Ti): Stabilizing addition • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 450 – 650 MPa • Yield Strength: ≥ 280 MPa • Elongation: 18 – 22% • Hardness: Typically 160 – 210 HB Key Features: • Free-machining ferritic stainless steel • Excellent machinability due to sulphur addition • Improved corrosion resistance with molybdenum • Titanium stabilization prevents intergranular corrosion • Good oxidation resistance • Suitable for automatic and CNC machining Material Characteristics: EN 10088-3 X2CrMoTiS18-2 stainless steel rod and bar provides a combination of good corrosion resistance, stable mechanical performance, and superior machinability. Its ferritic structure with titanium stabilization ensures reliability in service, particularly for precision-machined components. Applications: • Precision-machined components • Automotive and engineering parts • Fasteners, shafts, and fittings • Industrial hardware and connectors • Components requiring high machinability Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrMoTiS18-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, good corrosion resistance, and stable performance, X2CrMoTiS18-2 stainless steel rod is an ideal choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X17CrNi16-2 Stainless Steel Rod

EN 10088-3 X17CrNi16-2 is an austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, good strength, and superior toughness. Supplied in rod and bar form, X17CrNi16-2 stainless steel is widely used in engineering and industrial components where durability, formability, and resistance to corrosion in moderately aggressive environments are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X17CrNi16-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X17CrNi16-2): • X – High-alloy steel • 17 – Approx. 0.17% carbon content • CrNi16-2 – Approx. 16% chromium, 2% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.17 • Chromium (Cr): 15.5 – 17.5 • Nickel (Ni): 1.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 170 – 230 HB Key Features: • Austenitic stainless steel with excellent corrosion resistance • Good toughness and ductility even at low temperatures • Non-magnetic in annealed condition • Easy to form, bend, and machine • Heat-treatable to enhance strength if required • Suitable for rods and bars requiring high corrosion resistance Material Characteristics: EN 10088-3 X17CrNi16-2 stainless steel rod and bar combines excellent corrosion resistance with high toughness and formability. Its austenitic structure ensures reliable performance under mechanical stress and in mildly corrosive to aggressive environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Food processing and chemical equipment • Marine and offshore components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X17CrNi16-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, toughness, and mechanical properties, X17CrNi16-2 stainless steel is a reliable choice for industrial, engineering, and chemical applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 ss bar & rod

EN 10088-3 X15Cr13 Stainless Steel Bar

EN 10088-3 X15Cr13 is a martensitic stainless steel grade designed for applications requiring good corrosion resistance, high hardness, and moderate strength after heat treatment. Supplied in rod and bar form, X15Cr13 stainless steel is widely used in engineering and industrial components where wear resistance and mechanical performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X15Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X15Cr13): • X – High-alloy steel • 15 – Approx. 0.15% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.50 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 600 – 800 MPa • Yield Strength: ≥ 400 MPa • Elongation: 10 – 13% • Hardness: Can be significantly increased by quenching and tempering Key Features: • Martensitic stainless steel with moderate corrosion resistance • Excellent hardness and wear resistance after heat treatment • Good machinability in annealed condition • Heat-treatable for higher strength and hardness • Suitable for shafts, spindles, and precision components • Available in multiple bar and rod shapes Material Characteristics: EN 10088-3 X15Cr13 stainless steel rod and bar combines high hardness, moderate strength, and corrosion resistance. Its martensitic structure allows hardening by heat treatment, making it suitable for components subject to wear, mechanical stress, and moderate corrosion environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • Precision-engineered components requiring hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X15Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, reliable mechanical properties, and moderate corrosion resistance, X15Cr13 stainless steel is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar