en 10088 3 ss bar rod

EN 10088-3 X2CrNiMo17-12-3 is a low-carbon austenitic stainless steel grade offering excellent corrosion resistance, particularly in chloride-containing and aggressive environments. With higher molybdenum content than standard Mo-alloyed austenitic grades, this steel provides improved resistance to pitting and crevice corrosion while maintaining very good weldability and toughness. Supplied in bar and rod form, X2CrNiMo17-12-3 stainless steel is widely used in demanding industrial and engineering applications where enhanced corrosion performance and reliable mechanical properties are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo17-12-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and dependable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMo17-12-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMo17-12-3 – Approx. 17% chromium, 12% nickel, and 3% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.5 – 3.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Low-carbon austenitic stainless steel • Excellent resistance to pitting and crevice corrosion • Superior weldability and resistance to intergranular corrosion • High toughness and ductility • Non-magnetic in annealed condition • Suitable for aggressive and chloride-rich environments Material Characteristics: EN 10088-3 X2CrNiMo17-12-3 stainless steel rod and bar delivers enhanced corrosion resistance combined with stable mechanical properties. Its higher molybdenum content ensures long-term reliability in harsh and corrosive service conditions. Applications: • Chemical and petrochemical equipment • Marine and offshore components • Food processing and pharmaceutical equipment • Heat exchangers and pressure vessels • Shafts, fasteners, and machined parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMo17-12-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, outstanding weldability, and reliable mechanical performance, X2CrNiMo17-12-3 stainless steel bar is an ideal choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X4CrNiMo16-5-1 is a martensitic–austenitic stainless steel grade combining high mechanical strength, good toughness, and improved corrosion resistance. The addition of nickel enhances toughness, while molybdenum improves resistance to pitting and general corrosion. Supplied in bar and rod form, X4CrNiMo16-5-1 stainless steel is widely used in demanding engineering and industrial applications where strength, corrosion resistance, and dimensional stability are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X4CrNiMo16-5-1 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X4CrNiMo16-5-1): • X – High-alloy steel • 4 – Approx. 0.04% carbon content • CrNiMo16-5-1 – Approx. 16% chromium, 5% nickel, and 1% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.06 • Chromium (Cr): 15.0 – 17.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 0.8 – 1.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 800 – 1,050 MPa • Yield Strength: ≥ 600 MPa • Elongation: 14 – 18% • Hardness: Can be adjusted by quenching and tempering Key Features: • High-strength martensitic–austenitic stainless steel • Improved corrosion resistance due to molybdenum addition • Good toughness and impact strength • Heat-treatable for a wide range of mechanical properties • Good weldability with suitable procedures • Suitable for highly stressed components Material Characteristics: EN 10088-3 X4CrNiMo16-5-1 stainless steel rod and bar provides an excellent balance of strength, toughness, and corrosion resistance. Its alloy design ensures reliable performance under high loads and moderately corrosive environments. Applications: • Hydraulic and mechanical shafts • Pump and valve components • Turbine parts and power generation equipment • Marine and offshore components • Heavy engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X4CrNiMo16-5-1 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good corrosion resistance, and excellent toughness, X4CrNiMo16-5-1 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN25-7-4 is a super duplex stainless steel grade developed for applications requiring extremely high corrosion resistance, excellent mechanical strength, and outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking. The balanced austenitic–ferritic microstructure, combined with high chromium, molybdenum, and nitrogen content, provides superior performance in aggressive and chloride-rich environments. Supplied in rod and bar form, X2CrNiMoN25-7-4 stainless steel is widely used in critical industrial, marine, and offshore applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN25-7-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN25-7-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMoN25-7-4 – Approx. 25% chromium, 7% nickel, 4% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 6.0 – 8.0 • Molybdenum (Mo): 3.5 – 4.5 • Nitrogen (N): 0.24 – 0.32 • Silicon (Si): ≤ 0.80 • Manganese (Mn): ≤ 1.20 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 550 MPa • Elongation: 25 – 30% • Hardness: Typically 250 – 300 HB Key Features: • Super duplex stainless steel with very high strength • Exceptional resistance to pitting and crevice corrosion • Excellent stress corrosion cracking resistance • Good fatigue strength and toughness • Suitable for highly aggressive and chloride-rich environments • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMoN25-7-4 stainless steel rod and bar offers an outstanding combination of strength and corrosion resistance. Its duplex microstructure ensures superior performance under high pressure, high stress, and severe corrosive conditions. Applications: • Offshore platforms and subsea components • Oil and gas industry equipment • Chemical processing and desalination plants • Marine and seawater handling systems • Pressure vessels, shafts, and structural components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoN25-7-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high mechanical strength, and reliable performance in aggressive environments, X2CrNiMoN25-7-4 stainless steel rod is a dependable solution for critical industrial, marine, and offshore applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMo17-12-2 is a low-carbon austenitic stainless steel grade offering excellent corrosion resistance, particularly against pitting and crevice corrosion, due to the addition of molybdenum. Its low carbon content provides improved resistance to intergranular corrosion after welding, making this grade suitable for fabricated and welded components. Supplied in bar and rod form, X2CrNiMo17-12-2 stainless steel is widely used in demanding industrial and engineering applications where high corrosion resistance and good mechanical properties are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo17-12-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMo17-12-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMo17-12-2 – Approx. 17% chromium, 12% nickel, and 2% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.0 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Low-carbon austenitic stainless steel • Excellent resistance to pitting and crevice corrosion • Superior weldability and resistance to intergranular corrosion • High toughness and ductility • Non-magnetic in annealed condition • Suitable for aggressive and chloride-containing environments Material Characteristics: EN 10088-3 X2CrNiMo17-12-2 stainless steel rod and bar delivers outstanding corrosion resistance combined with reliable mechanical properties. Its molybdenum-enhanced composition ensures long-term performance in harsh and corrosive service conditions. Applications: • Chemical and petrochemical equipment • Marine and offshore components • Food processing and pharmaceutical equipment • Pressure vessels and heat exchangers • Shafts, fasteners, and machined parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMo17-12-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, superior weldability, and dependable mechanical properties, X2CrNiMo17-12-2 stainless steel bar is an ideal choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X8CrMnNiN18-9-5 is a nitrogen-alloyed austenitic stainless steel grade engineered to deliver high strength, excellent toughness, and good corrosion resistance. The combined addition of manganese and nitrogen significantly enhances yield strength while maintaining the ductility and formability typical of austenitic stainless steels. Supplied in rod and bar form, X8CrMnNiN18-9-5 stainless steel is well suited for demanding engineering and structural applications where higher mechanical strength and reliable corrosion performance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X8CrMnNiN18-9-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X8CrMnNiN18-9-5): • X – High-alloy steel • 8 – Approx. 0.08% carbon content • CrMnNiN18-9-5 – Approx. 18% chromium, 9% nickel, with manganese and nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Manganese (Mn): 4.0 – 6.0 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 400 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • Nitrogen-strengthened austenitic stainless steel • High yield and tensile strength • Excellent toughness and ductility • Good resistance to general corrosion • Non-magnetic in annealed condition • Good formability and weldability Material Characteristics: EN 10088-3 X8CrMnNiN18-9-5 stainless steel rod and bar provides an excellent balance of strength, toughness, and corrosion resistance. Nitrogen alloying enables higher mechanical performance while retaining the processing advantages of austenitic stainless steels. Applications: • Structural and load-bearing components • Shafts, fasteners, and machined parts • Pressure vessels and engineering equipment • Construction and industrial machinery • Chemical and process industry components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X8CrMnNiN18-9-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, good corrosion resistance, and excellent toughness, X8CrMnNiN18-9-5 stainless steel rod is a reliable choice for demanding engineering and structural applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X11CrNiMnN19-8-6 is a nitrogen-alloyed austenitic stainless steel grade designed to provide high strength, excellent toughness, and good corrosion resistance. The addition of nitrogen and manganese significantly enhances yield strength while maintaining the ductility and formability typical of austenitic stainless steels. Supplied in bar and rod form, X11CrNiMnN19-8-6 stainless steel is suitable for demanding engineering and structural applications where higher mechanical strength is required without sacrificing corrosion performance. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X11CrNiMnN19-8-6 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X11CrNiMnN19-8-6): • X – High-alloy steel • 11 – Approx. 0.11% carbon content • CrNiMnN19-8-6 – Approx. 19% chromium, 8% nickel, with manganese and nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.15 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 7.0 – 9.0 • Manganese (Mn): 5.0 – 7.0 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • Nitrogen-alloyed austenitic stainless steel with high strength • Excellent toughness and ductility • Good resistance to general corrosion • Non-magnetic in annealed condition • Good formability and weldability • Suitable for high-load structural applications Material Characteristics: EN 10088-3 X11CrNiMnN19-8-6 stainless steel rod and bar offers a superior combination of strength, toughness, and corrosion resistance. Nitrogen strengthening allows thinner sections and weight reduction while maintaining excellent mechanical performance. Applications: • Structural and load-bearing components • Shafts, fasteners, and machined parts • Pressure vessels and engineering equipment • Chemical and process industry components • Construction and industrial assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X11CrNiMnN19-8-6 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, good corrosion resistance, and reliable toughness, X11CrNiMnN19-8-6 stainless steel bar is a dependable solution for demanding engineering and structural applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiSi18-15-4 is a high-alloy austenitic stainless steel grade characterized by excellent oxidation resistance, good corrosion resistance, and stable mechanical properties at elevated temperatures. The addition of silicon significantly enhances resistance to scaling and oxidation, making this grade suitable for high-temperature and thermal cycling applications. Supplied in rod and bar form, X1CrNiSi18-15-4 stainless steel is widely used in industrial and engineering components exposed to heat, corrosive gases, and demanding service conditions. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiSi18-15-4): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiSi18-15-4 – Approx. 18% chromium, 15% nickel, and 4% silicon Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 14.0 – 16.0 • Silicon (Si): 3.0 – 4.5 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 35 – 45% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with high silicon content • Excellent oxidation and scaling resistance at elevated temperatures • Good corrosion resistance in many environments • High toughness and ductility • Non-magnetic in annealed condition • Suitable for continuous high-temperature service Material Characteristics: EN 10088-3 X1CrNiSi18-15-4 stainless steel rod and bar offers reliable performance in high-temperature and oxidizing environments. Its silicon-enhanced alloy design ensures resistance to scaling and thermal degradation while maintaining good mechanical strength. Applications: • Furnace components and heat treatment fixtures • Exhaust systems and thermal equipment • Chemical processing and petrochemical equipment • Power generation and industrial heaters • High-temperature engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent oxidation resistance, good corrosion performance, and stable high-temperature properties, X1CrNiSi18-15-4 stainless steel rod is an ideal choice for demanding thermal and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNi17-7 is a precipitation-hardening stainless steel grade that offers a unique combination of high strength, good corrosion resistance, and excellent fatigue properties. With balanced chromium and nickel content, this grade can be strengthened through suitable heat treatment, making it ideal for applications requiring higher mechanical strength than conventional austenitic stainless steels. Supplied in rod and bar form, X5CrNi17-7 stainless steel is widely used in engineering and industrial applications where strength, corrosion resistance, and dimensional stability are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNi17-7 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNi17-7): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • CrNi17-7 – Approx. 17% chromium and 7% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 6.5 – 7.8 • Aluminium (Al): 0.75 – 1.50 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 900 – 1,200 MPa • Yield Strength: ≥ 700 MPa • Elongation: 6 – 12% • Hardness: Can be significantly increased by precipitation hardening Key Features: • Precipitation-hardening stainless steel • High strength and good fatigue resistance • Good corrosion resistance in many environments • Excellent dimensional stability after heat treatment • Suitable for high-performance spring and structural components Material Characteristics: EN 10088-3 X5CrNi17-7 stainless steel rod and bar combines high strength with good corrosion resistance and fatigue performance. Its precipitation-hardening capability allows it to meet demanding mechanical requirements while maintaining dimensional accuracy. Applications: • Springs and spring components • Shafts and precision mechanical parts • Aerospace and automotive components • Fasteners and high-strength fittings • Industrial and engineering assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X5CrNi17-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good corrosion resistance, and excellent fatigue properties, X5CrNi17-7 stainless steel bar is a reliable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiMo13-4 is a low-carbon martensitic–austenitic (martensitic stainless steel with nickel and molybdenum) grade offering high strength, excellent toughness, and improved corrosion resistance compared to standard martensitic steels. The addition of nickel enhances toughness, while molybdenum improves resistance to pitting and crevice corrosion. Supplied in rod and bar form, X3CrNiMo13-4 stainless steel is widely used in demanding engineering and industrial applications requiring a combination of strength, corrosion resistance, and weldability. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMo13-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMo13-4): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiMo13-4 – Approx. 13% chromium, 4% nickel, with molybdenum addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 12.0 – 14.0 • Nickel (Ni): 3.5 – 4.5 • Molybdenum (Mo): 0.4 – 0.7 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 800 – 1,000 MPa • Yield Strength: ≥ 650 MPa • Elongation: 15 – 18% • Hardness: Can be adjusted by quenching and tempering Key Features: • High-strength martensitic stainless steel with nickel and molybdenum • Improved corrosion resistance compared to standard martensitic grades • Excellent toughness, even at lower temperatures • Good weldability with proper procedures • Heat-treatable to achieve a wide range of mechanical properties • Suitable for critical engineering components Material Characteristics: EN 10088-3 X3CrNiMo13-4 stainless steel rod and bar combines high mechanical strength with good corrosion resistance and toughness. Its balanced alloying ensures reliable performance under high stress, dynamic loads, and moderately corrosive environments. Applications: • Hydraulic and mechanical shafts • Pump and valve components • Turbine parts and power generation equipment • Marine and offshore components • Heavy engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X3CrNiMo13-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, excellent toughness, and enhanced corrosion resistance, X3CrNiMo13-4 stainless steel rod is a dependable solution for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X10CrNi18-8 is an austenitic stainless steel grade offering excellent corrosion resistance, good mechanical strength, and high toughness. With balanced chromium and nickel content, this grade provides reliable performance in oxidizing and mildly corrosive environments. Supplied in rod and bar form, X10CrNi18-8 stainless steel is widely used in engineering, fabrication, and industrial applications where formability, weldability, and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X10CrNi18-8 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X10CrNi18-8): • X – High-alloy steel • 10 – Approx. 0.10% carbon content • CrNi18-8 – Approx. 18% chromium and 8% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.15 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 7.5 – 9.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.030 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: 40 – 45% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with good corrosion resistance • Excellent formability and weldability • High toughness over a wide temperature range • Non-magnetic in annealed condition • Suitable for machined and fabricated bar components Material Characteristics: EN 10088-3 X10CrNi18-8 stainless steel rod and bar provides a combination of corrosion resistance, strength, and ductility. Its austenitic structure ensures stable performance in demanding industrial and fabrication environments. Applications: • Shafts, fasteners, and machined components • Food processing and dairy equipment • Chemical and process industry components • Architectural and structural applications • General engineering and fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X10CrNi18-8 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With reliable corrosion resistance, good mechanical properties, and excellent fabricability, X10CrNi18-8 stainless steel bar is a dependable choice for industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNi19-11 is a low-carbon austenitic stainless steel grade known for excellent corrosion resistance, very good weldability, and high toughness. Due to its low carbon content, this grade offers improved resistance to intergranular corrosion, making it suitable for welded constructions and corrosive environments. Supplied in rod and bar form, X2CrNi19-11 stainless steel is widely used in industrial, engineering, and fabrication applications where durability, hygiene, and corrosion resistance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi19-11 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dimensional accuracy, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNi19-11): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNi19-11 – Approx. 19% chromium and 11% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 10.0 – 12.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Low-carbon austenitic stainless steel • Excellent corrosion resistance in a wide range of environments • Very good weldability without risk of intergranular corrosion • High toughness and ductility • Non-magnetic in annealed condition • Suitable for hygienic and corrosive service applications Material Characteristics: EN 10088-3 X2CrNi19-11 stainless steel rod and bar provides excellent resistance to corrosion, high toughness, and stable mechanical properties. Its low-carbon austenitic structure ensures reliable performance in welded and corrosive industrial environments. Applications: • Chemical and petrochemical equipment • Food processing and dairy equipment • Pharmaceutical and medical components • Shafts, fasteners, and machined parts • Architectural and structural applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNi19-11 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, excellent weldability, and dependable mechanical properties, X2CrNi19-11 stainless steel rod is an ideal choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X4CrNi18-12 is a low-carbon austenitic stainless steel grade offering excellent corrosion resistance, good strength, and outstanding toughness. With high chromium and nickel content, this grade provides reliable performance in oxidizing and mildly aggressive environments. Supplied in rod and bar form, X4CrNi18-12 stainless steel is widely used in engineering and industrial components where durability, formability, and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X4CrNi18-12 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X4CrNi18-12): • X – High-alloy steel • 4 – Approx. 0.04% carbon content • CrNi18-12 – Approx. 18% chromium and 12% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 10.5 – 13.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with excellent corrosion resistance • Good toughness and ductility at low and high temperatures • Non-magnetic in annealed condition • Good formability and weldability • Suitable for rods and bars requiring high corrosion resistance Material Characteristics: EN 10088-3 X4CrNi18-12 stainless steel rod and bar provides excellent corrosion resistance, high toughness, and good mechanical properties. Its austenitic structure ensures stable performance in demanding industrial and corrosive environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Chemical and process equipment • Food processing equipment • Marine and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X4CrNi18-12 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, toughness, and versatility, X4CrNi18-12 stainless steel bar is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar