en 10088 3 ss bar rod

EN 10088-3 X3CrNiCu19-9-2 is a precipitation-hardening austenitic stainless steel grade designed for applications requiring good corrosion resistance combined with higher strength achieved through age hardening. The controlled addition of copper enables precipitation strengthening, while chromium and nickel provide reliable resistance to general corrosion and oxidation. Supplied in bar and rod form, X3CrNiCu19-9-2 stainless steel is widely used in engineering and industrial components where strength, toughness, and corrosion resistance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiCu19-9-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiCu19-9-2 – Approx. 19% chromium, 9% nickel, 2% copper Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 8.0 – 10.0 • Copper (Cu): 1.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 600 – 900 MPa (higher after aging) • Yield Strength: ≥ 300 MPa (can be significantly increased by precipitation hardening) • Elongation: 20 – 35% • Hardness: Typically 180 – 280 HB (after aging) Key Features: • Precipitation-hardening austenitic stainless steel • Good general corrosion resistance • Higher strength achievable through age hardening • Good toughness and fatigue resistance • Good weldability in solution-annealed condition • Suitable for structural and mechanical components Material Characteristics: EN 10088-3 X3CrNiCu19-9-2 stainless steel rod and bar offers a useful combination of corrosion resistance and enhanced strength through precipitation hardening. Its austenitic structure ensures good toughness and formability, while copper addition enables strength improvement for demanding service conditions. Applications: • Shafts, fasteners, and structural components • Mechanical and engineering parts • Pump and valve components • Aerospace and industrial hardware • Components requiring higher strength with corrosion resistance Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiCu19-9-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, precipitation-hardening capability, and reliable mechanical performance, X3CrNiCu19-9-2 stainless steel bar is a dependable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoCuN20-18-7 is a high-alloy austenitic stainless steel grade engineered for severe corrosive environments where excellent resistance to pitting, crevice corrosion, and stress corrosion cracking is required. The balanced addition of chromium, nickel, molybdenum, copper, and nitrogen provides superior performance in acidic, chloride-rich, and chemically aggressive conditions. Supplied in rod and bar form, X1CrNiMoCuN20-18-7 stainless steel is commonly used in chemical processing and critical industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN20-18-7): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN20-18-7 – Approx. 20% chromium, 18% nickel, 7% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 19.0 – 21.0 • Nickel (Ni): 17.0 – 19.0 • Molybdenum (Mo): 6.0 – 7.5 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with excellent corrosion resistance • Outstanding resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-containing environments • High ductility and toughness • Very good weldability • Suitable for severe chemical and industrial applications Material Characteristics: EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rod and bar offers exceptional corrosion resistance combined with excellent mechanical properties. Its austenitic microstructure ensures long service life, high toughness, and reliable performance in aggressive service conditions. Applications: • Chemical and petrochemical processing equipment • Acid handling and storage systems • Offshore and marine components • Desalination and seawater treatment plants • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN20-18-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN20-18-7 stainless steel rod is an excellent choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrNiTi18-10 is a titanium-stabilized austenitic stainless steel grade designed for applications requiring good corrosion resistance, excellent weldability, and improved resistance to intergranular corrosion. The addition of titanium stabilizes carbon, preventing chromium carbide precipitation during welding or exposure to elevated temperatures. Supplied in bar and rod form, X6CrNiTi18-10 stainless steel is widely used in engineering, chemical, and structural applications where thermal stability and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrNiTi18-10 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrNiTi18-10): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • CrNi18-10 – Approx. 18% chromium and 10% nickel • Ti – Titanium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 12.0 • Titanium (Ti): ≥ 5 × C (stabilizing addition) • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 210 MPa • Elongation: 40 – 45% • Hardness: Typically 160 – 200 HB Key Features: • Austenitic stainless steel with titanium stabilization • Excellent resistance to intergranular corrosion • Good general corrosion resistance • Excellent weldability without post-weld heat treatment • High ductility and toughness • Suitable for elevated temperature applications Material Characteristics: EN 10088-3 X6CrNiTi18-10 stainless steel rod and bar provides reliable corrosion resistance and thermal stability. Its titanium-stabilized austenitic structure ensures long service life, especially in welded components exposed to moderately high temperatures. Applications: • Chemical processing equipment • Heat exchangers and pressure vessels • Exhaust systems and high-temperature components • Structural and engineering applications • Food processing and industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrNiTi18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent weldability, resistance to intergranular corrosion, and dependable mechanical performance, X6CrNiTi18-10 stainless steel bar is a reliable choice for chemical, structural, and high-temperature applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoCuN25-25-5 is a high-alloy austenitic stainless steel grade engineered for extremely aggressive environments where superior resistance to corrosion, pitting, crevice attack, and stress corrosion cracking is essential. The high chromium and nickel content, combined with molybdenum, copper, and nitrogen, provides excellent performance in acidic, chloride-rich, and chemically aggressive media. Supplied in rod and bar form, X1CrNiMoCuN25-25-5 stainless steel is commonly used in critical chemical and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN25-25-5): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN25-25-5 – Approx. 25% chromium, 25% nickel, 5% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 24.0 – 26.0 • Molybdenum (Mo): 4.5 – 6.0 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with outstanding corrosion resistance • Excellent resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-rich environments • High ductility and toughness • Very good weldability • Suitable for severe chemical processing applications Material Characteristics: EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rod and bar offers exceptional resistance to a wide range of aggressive chemicals while maintaining excellent mechanical properties. Its austenitic microstructure ensures long service life, high toughness, and reliability under demanding service conditions. Applications: • Chemical and petrochemical processing equipment • Acid production and handling systems • Offshore and marine components • Desalination and seawater treatment plants • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiMoCuN25-25-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1CrNiMoCuN25-25-5 stainless steel rod is an ideal choice for critical industrial and chemical applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1NiCrMoCuN25-20-7 is a high-alloy austenitic stainless steel grade developed for extremely aggressive corrosive environments where exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking is required. With very high nickel and chromium content, combined with molybdenum, copper, and nitrogen, this grade provides outstanding resistance to acids, chlorides, and reducing environments. Supplied in bar and rod form, X1NiCrMoCuN25-20-7 stainless steel is widely used in chemical processing and severe service applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent corrosion resistance, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1NiCrMoCuN25-20-7): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • NiCrMoCuN25-20-7 – Approx. 25% nickel, 20% chromium, 7% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Nickel (Ni): 24.0 – 26.0 • Chromium (Cr): 19.0 – 21.0 • Molybdenum (Mo): 6.0 – 7.5 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 230 HB Key Features: • High-alloy austenitic stainless steel with exceptional corrosion resistance • Excellent resistance to pitting, crevice, and stress corrosion cracking • Superior performance in acidic and chloride-rich environments • High ductility and toughness • Very good weldability • Suitable for severe chemical processing conditions Material Characteristics: EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rod and bar offers outstanding resistance to a wide range of aggressive chemicals while maintaining excellent mechanical properties. Its austenitic microstructure ensures high toughness, formability, and long-term reliability in critical service conditions. Applications: • Chemical and petrochemical processing equipment • Acid handling systems and reactors • Offshore and marine components • Desalination and seawater systems • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1NiCrMoCuN25-20-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, high alloy content, and dependable performance in aggressive environments, X1NiCrMoCuN25-20-7 stainless steel bar is an excellent choice for critical chemical, marine, and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrMoTiS18-2 is a free-machining ferritic stainless steel grade stabilized with titanium and alloyed with molybdenum to enhance corrosion resistance and machinability. The addition of sulphur significantly improves cutting performance, making this grade suitable for high-speed machining and precision components. X2CrMoTiS18-2 offers good resistance to general corrosion, oxidation, and mild chemical environments, along with stable mechanical properties. Supplied in rod and bar form, this grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrMoTiS18-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable machinability, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrMoTiS18-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Mo2 – Approx. 2% molybdenum • Ti – Titanium stabilized • S – Sulphur added for improved machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Molybdenum (Mo): 1.5 – 2.5 • Titanium (Ti): Stabilizing addition • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 450 – 650 MPa • Yield Strength: ≥ 280 MPa • Elongation: 18 – 22% • Hardness: Typically 160 – 210 HB Key Features: • Free-machining ferritic stainless steel • Excellent machinability due to sulphur addition • Improved corrosion resistance with molybdenum • Titanium stabilization prevents intergranular corrosion • Good oxidation resistance • Suitable for automatic and CNC machining Material Characteristics: EN 10088-3 X2CrMoTiS18-2 stainless steel rod and bar provides a combination of good corrosion resistance, stable mechanical performance, and superior machinability. Its ferritic structure with titanium stabilization ensures reliability in service, particularly for precision-machined components. Applications: • Precision-machined components • Automotive and engineering parts • Fasteners, shafts, and fittings • Industrial hardware and connectors • Components requiring high machinability Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrMoTiS18-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, good corrosion resistance, and stable performance, X2CrMoTiS18-2 stainless steel rod is an ideal choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNb17 is a ferritic stainless steel grade stabilized with niobium, designed for applications requiring good corrosion resistance, excellent resistance to intergranular corrosion, and stable mechanical properties at elevated temperatures. The niobium addition prevents carbide precipitation, improving weldability and high-temperature performance. Supplied in bar and rod form, X3CrNb17 stainless steel is commonly used in automotive, industrial, and structural applications where oxidation resistance and thermal stability are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and other long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNb17 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNb17): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr17 – Approx. 17% chromium • Nb – Niobium stabilized Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 16.0 – 18.0 • Niobium (Nb): 0.20 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 450 – 600 MPa • Yield Strength: ≥ 280 MPa • Elongation: 20 – 25% • Hardness: Typically 160 – 200 HB Key Features: • Ferritic stainless steel with niobium stabilization • Good resistance to general and intergranular corrosion • Excellent oxidation resistance at elevated temperatures • Good weldability without risk of sensitization • Stable mechanical properties during thermal cycling • Cost-effective alternative to austenitic grades Material Characteristics: EN 10088-3 X3CrNb17 stainless steel rod and bar offers reliable corrosion resistance combined with good thermal stability. Its ferritic structure and niobium stabilization make it suitable for components exposed to heat, oxidation, and moderate corrosive environments. Applications: • Automotive exhaust systems and components • Heat-resistant structural parts • Industrial furnace and heat exchanger components • Structural and engineering applications • Mechanical parts exposed to elevated temperatures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNb17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good corrosion resistance, thermal stability, and reliable mechanical performance, X3CrNb17 stainless steel bar is a dependable choice for automotive, industrial, and heat-resistant applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoCuN25-6-3 is a super duplex stainless steel grade developed for highly aggressive environments requiring exceptional corrosion resistance, high mechanical strength, and excellent resistance to stress corrosion cracking. The addition of chromium, nickel, molybdenum, copper, and nitrogen provides outstanding resistance to pitting, crevice corrosion, and corrosion in acidic and chloride-rich environments. Supplied in rod and bar form, X2CrNiMoCuN25-6-3 stainless steel is widely used in offshore, chemical, and marine applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and other long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoCuN25-6-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoCuN25-6-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMoCuN25-6-3 – Approx. 25% chromium, 6% nickel, 3% molybdenum, with copper and nitrogen additions Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 24.0 – 26.0 • Nickel (Ni): 5.5 – 7.5 • Molybdenum (Mo): 2.5 – 3.5 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.20 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 550 MPa • Elongation: 20 – 25% • Hardness: Typically 260 – 320 HB Key Features: • Super duplex stainless steel with very high strength • Excellent resistance to pitting, crevice, and general corrosion • Superior resistance to stress corrosion cracking • Good performance in acidic and chloride-containing environments • High fatigue strength and toughness • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMoCuN25-6-3 stainless steel rod and bar combines very high mechanical strength with exceptional corrosion resistance. Its super duplex microstructure ensures long service life and reliable performance under high pressure, high stress, and aggressive chemical conditions. Applications: • Offshore platforms and subsea components • Oil and gas processing equipment • Chemical and petrochemical plants • Desalination and seawater systems • Heat exchangers, pressure vessels, and shafts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoCuN25-6-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With outstanding corrosion resistance, high strength, and dependable performance in extreme environments, X2CrNiMoCuN25-6-3 stainless steel rod is an ideal solution for critical industrial, marine, and offshore applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN29-7-2 is a super duplex stainless steel grade engineered for extremely demanding environments requiring exceptional corrosion resistance, very high mechanical strength, and outstanding resistance to stress corrosion cracking. With very high chromium content, combined with nickel, molybdenum, and nitrogen, this grade offers superior resistance to pitting, crevice corrosion, and chloride-induced corrosion. Supplied in bar and rod form, X2CrNiMoN29-7-2 stainless steel is widely used in critical industrial, marine, and offshore applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN29-7-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN29-7-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMoN29-7-2 – Approx. 29% chromium, 7% nickel, 2% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 28.0 – 30.0 • Nickel (Ni): 6.0 – 8.0 • Molybdenum (Mo): 1.5 – 2.5 • Nitrogen (N): 0.20 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 550 MPa • Elongation: 20 – 25% • Hardness: Typically 260 – 320 HB Key Features: • Super duplex stainless steel with very high strength • Exceptional resistance to pitting and crevice corrosion • Excellent resistance to stress corrosion cracking • High fatigue strength and toughness • Suitable for extreme chloride-rich and aggressive environments • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMoN29-7-2 stainless steel rod and bar provides outstanding mechanical strength and corrosion resistance. Its super duplex microstructure ensures reliable performance under high pressure, high stress, and severely corrosive conditions. Applications: • Offshore platforms and subsea equipment • Oil and gas processing systems • Chemical and petrochemical plants • Desalination and seawater handling systems • Pressure vessels, shafts, and structural components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoN29-7-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, very high strength, and reliable performance in extreme environments, X2CrNiMoN29-7-2 stainless steel bar is a superior choice for critical industrial, marine, and offshore applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN22-5-3 is a duplex stainless steel grade designed to deliver an excellent combination of high mechanical strength, superior corrosion resistance, and outstanding resistance to stress corrosion cracking. The balanced austenitic–ferritic microstructure, along with chromium, molybdenum, and nitrogen alloying, provides enhanced resistance to pitting and crevice corrosion in chloride-rich and aggressive environments. Supplied in rod and bar form, X2CrNiMoN22-5-3 stainless steel is widely used in demanding industrial, marine, and offshore applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN22-5-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN22-5-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMoN22-5-3 – Approx. 22% chromium, 5% nickel, 3% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 21.0 – 23.0 • Nickel (Ni): 4.5 – 6.5 • Molybdenum (Mo): 2.5 – 3.5 • Nitrogen (N): 0.14 – 0.22 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 620 – 850 MPa • Yield Strength: ≥ 450 MPa • Elongation: 25 – 30% • Hardness: Typically 230 – 280 HB Key Features: • Duplex stainless steel with high strength • Excellent resistance to pitting and crevice corrosion • Outstanding resistance to stress corrosion cracking • Good toughness and fatigue strength • Better strength-to-weight ratio than austenitic grades • Good weldability with controlled procedures Material Characteristics: EN 10088-3 X2CrNiMoN22-5-3 stainless steel rod and bar offers a superior balance of strength and corrosion resistance. Its duplex microstructure ensures reliable performance in high-pressure, high-stress, and aggressive service environments. Applications: • Offshore platforms and subsea components • Oil and gas industry equipment • Chemical processing and desalination plants • Marine and seawater handling systems • Pressure vessels, shafts, and structural components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiMoN22-5-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high mechanical strength, and reliable performance in aggressive environments, X2CrNiMoN22-5-3 stainless steel rod is a dependable solution for industrial, marine, and offshore applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-13-5 is a nitrogen-alloyed austenitic stainless steel grade developed to provide excellent corrosion resistance, high mechanical strength, and superior resistance to pitting and crevice corrosion. The addition of molybdenum and nitrogen significantly enhances performance in chloride-containing and aggressive environments while maintaining good weldability and toughness. Supplied in bar and rod form, X2CrNiMoN17-13-5 stainless steel is widely used in demanding industrial, chemical, and marine applications where enhanced corrosion resistance and strength are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-13-5 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-13-5): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNiMoN17-13-5 – Approx. 17% chromium, 13% nickel, 5% molybdenum, with nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 12.0 – 14.0 • Molybdenum (Mo): 4.5 – 5.5 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 350 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Outstanding resistance to pitting and crevice corrosion • High strength combined with excellent toughness • Very good weldability and resistance to intergranular corrosion • Non-magnetic in annealed condition • Suitable for highly aggressive chemical environments Material Characteristics: EN 10088-3 X2CrNiMoN17-13-5 stainless steel rod and bar offers exceptional corrosion resistance and enhanced mechanical strength. Nitrogen strengthening enables superior performance in severe service conditions while maintaining fabrication flexibility. Applications: • Chemical and petrochemical processing equipment • Offshore and marine components • Heat exchangers and pressure vessels • Pharmaceutical and food processing equipment • Shafts, fasteners, and high-strength machined parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNiMoN17-13-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With outstanding corrosion resistance, high strength, and reliable performance in aggressive environments, X2CrNiMoN17-13-5 stainless steel bar is an excellent choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiMo17-13-3 is a low-carbon austenitic stainless steel grade engineered for excellent corrosion resistance, high toughness, and reliable mechanical strength. With balanced additions of chromium, nickel, and molybdenum, this grade offers strong resistance to pitting and crevice corrosion in chloride-bearing and aggressive environments while maintaining good weldability. Supplied in rod and bar form, X3CrNiMo17-13-3 stainless steel is widely used in industrial, chemical, and marine applications where durability and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMo17-13-3 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and dependable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMo17-13-3): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiMo17-13-3 – Approx. 17% chromium, 13% nickel, and 3% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 12.0 – 14.0 • Molybdenum (Mo): 2.5 – 3.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with molybdenum addition • Excellent resistance to pitting and crevice corrosion • Very good weldability and resistance to intergranular corrosion • High toughness and ductility • Non-magnetic in annealed condition • Suitable for aggressive chemical and marine environments Material Characteristics: EN 10088-3 X3CrNiMo17-13-3 stainless steel rod and bar provides enhanced corrosion resistance along with stable mechanical properties. Its alloy design ensures dependable performance in harsh service environments requiring long-term reliability. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Food processing and pharmaceutical equipment • Shafts, fasteners, and machined parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X3CrNiMo17-13-3 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good weldability, and reliable mechanical performance, X3CrNiMo17-13-3 stainless steel rod is a dependable choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar