supplier

ASTM A176-99 Stainless Steel Plate, Sheet & Strip are flat-rolled heat-resisting chromium stainless steels designed for applications requiring good oxidation resistance, moderate corrosion resistance, and reliable performance at elevated temperatures. These steels are primarily ferritic and martensitic grades used in industrial and thermal environments. Manufactured in accordance with ASTM A176-99, this specification covers stainless steel plate, sheet, and strip intended for heat-resisting and corrosion-resisting applications. The standard ensures controlled chemical composition and mechanical properties suitable for high-temperature service. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A176-99 Stainless Steel Plate, Sheet & Strip, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Stainless steel plates, Sheets, Coils, Strips, Slit coils, Cut-to-length sheets Available Grades (as per ASTM A176-99): 403 | 410 | 420 | 422 | 431 | 442 | 446 Scope of Specification: • Covers heat-resisting chromium stainless steel flat products • Includes ferritic and martensitic stainless steel grades • Suitable for high-temperature and moderate corrosion environments • Supplied in annealed or heat-treated conditions Typical Chemical Composition (varies by grade): • Chromium (Cr): Provides oxidation and corrosion resistance • Carbon (C): Controls hardness and strength • Silicon (Si): Improves oxidation resistance • Manganese (Mn): Enhances hot working properties • Phosphorus (P) & Sulphur (S): Limited to specified maximum levels Mechanical Properties (Typical – Grade Dependent): • Good tensile strength • Moderate corrosion resistance • High temperature oxidation resistance • Hardness varies depending on heat treatment Key Features: • Excellent heat and oxidation resistance • Good mechanical strength at elevated temperatures • Suitable for thermal and industrial applications • Wide range of chromium stainless steel grades • Reliable performance in harsh environments Material Characteristics: ASTM A176-99 stainless steel plate, sheet, and strip are designed for applications involving heat exposure and oxidation conditions. The chromium content enhances resistance to scaling and oxidation, while martensitic grades offer higher strength and hardness after heat treatment. Applications: • Furnace parts and heat treatment equipment • Boiler components • Petrochemical equipment • Industrial heating systems • Exhaust systems • High-temperature structural components Conclusion: Ladhani Metal Corporation supplies premium quality ASTM A176-99 Stainless Steel Plate, Sheet & Strip in various grades, sizes, and finishes. With excellent heat resistance and dependable performance, these materials are widely used in thermal, industrial, and engineering applications. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #ASTMA176 #ASTMA176Steel #ASTMA176SS #StainlessSteelPlate #StainlessSteelSheet #StainlessSteelStrip #SSPlate #SSSheet #SSStrip #FerriticStainlessSteel #MartensiticStainlessSteel #SS403 #SS420 #SS422 #SS431 #SS442 #SS446 #HeatResistantSteel #CorrosionResistantSteel #HighTemperatureSteel #IndustrialSteel #SteelPlate #SteelSheet #SteelStrip #FlatSteel #MetalPlate #MetalSheet #MetalStrip #SteelManufacturer #SteelSupplier #SteelStockist #StainlessSteelSupplier #StainlessSteelManufacturer #SteelIndustry #MetalIndustry #EngineeringSteel #HeavyEngineering #PowerPlantSteel #ChemicalIndustrySteel #FurnaceSteel #OxidationResistant #SteelProducts #SteelSolutions #GlobalSteel #IndiaSteel #MumbaiSteel #SteelExport #SteelTrading #IndustrialSupply #QualitySteel#Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru

ASTM A167-99 Stainless Steel Sheet, Plate & Strip are flat-rolled stainless steel products designed for applications requiring excellent corrosion resistance, heat resistance, and good mechanical properties. These materials are widely used in chemical processing, food processing, heat exchangers, and high-temperature applications. Manufactured in accordance with ASTM A167-99, this specification covers stainless steel sheet, plate, and strip in various finishes and conditions. The standard ensures controlled chemical composition, mechanical properties, and surface quality suitable for industrial and commercial applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A167-99 Stainless Steel Sheet, Plate & Strip, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Stainless steel sheets, Plates, Coils, Strips, Slit coils, Cut-to-length sheets Available Grades (as per ASTM A167-99): 302B | 308 | 309 | 310 Scope of Specification: • Covers stainless steel sheet, plate, and strip • Suitable for high-temperature and corrosion-resistant applications • Available in various finishes and thickness ranges • Supplied in annealed and heat-treated conditions Typical Chemical Composition (varies by grade): • Chromium (Cr): Provides corrosion and oxidation resistance • Nickel (Ni): Enhances toughness and corrosion resistance • Carbon (C): Controlled for strength and heat resistance • Manganese (Mn): Improves hot working properties • Silicon (Si): Enhances oxidation resistance • Phosphorus (P) & Sulphur (S): Limited to specified maximum levels Mechanical Properties (Typical – Grade Dependent): • Good tensile strength • Excellent corrosion resistance • High temperature strength • Good ductility and formability Key Features: • Excellent corrosion and oxidation resistance • Good heat resistance at elevated temperatures • Suitable for fabrication and welding • Available in multiple grades for varied applications • Reliable performance in aggressive environments Material Characteristics: ASTM A167-99 stainless steel sheet, plate, and strip offer a combination of corrosion resistance, heat resistance, and mechanical strength. These materials are suitable for environments exposed to high temperatures and corrosive media, ensuring durability and long service life. Applications: • Heat exchangers • Furnace components • Chemical processing equipment • Food processing equipment • Petrochemical industries • Industrial fabrication Conclusion: Ladhani Metal Corporation supplies high-quality ASTM A167-99 Stainless Steel Sheet, Plate & Strip in various grades, sizes, and finishes. With excellent corrosion resistance and high-temperature performance, these stainless steel products are widely used in industrial and engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ASTMA167 #ASTMA167Steel #ASTMA167SS #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelStrip #SSSheet #SSPlate #SSStrip #AusteniticStainlessSteel #SS302 #SS308 #SS309 #SS310 #HeatResistantSteel #CorrosionResistantSteel #IndustrialSteel #SteelSheet #SteelPlate #SteelStrip #FlatSteel #MetalSheet #MetalPlate #MetalStrip #SteelManufacturer #SteelSupplier #SteelStockist #StainlessSteelSupplier #StainlessSteelManufacturer #StainlessSteelStockist #SteelIndustry #MetalIndustry #EngineeringSteel #HighTemperatureSteel #OxidationResistant #ChemicalIndustrySteel #FoodGradeSteel #ConstructionSteel #HeavyEngineering #SteelProducts #SteelSolutions #GlobalSteel #IndiaSteel #MumbaiSteel #SteelExport #SteelTrading #IndustrialSupply #QualitySteel #FlatProducts #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly @Mumbai @Delhi @Chennai @Kolkata @Hyderabad @Bengaluru

ASTM A108 Carbon Steel Bars are high-quality cold-finished steel bars designed for precision applications requiring improved dimensional accuracy, enhanced surface finish, and consistent mechanical properties. These bars are widely used in automotive, machinery, and engineering industries where close tolerances and excellent machinability are essential. Manufactured in accordance with ASTM A108, this specification covers cold-finished carbon steel bars in round, square, and hexagonal shapes. The standard defines chemical composition, mechanical properties, dimensional tolerances, and surface quality requirements for a wide range of carbon steel grades. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A108 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Cold drawn round bars, Bright bars, Turned bars, Ground bars, Polished bars, Square bars, Hex bars Available Grades (as per ASTM A108): 1008, 1010, 1012, 1015, 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1025, 1026, 1030, 1035, 1040, 1045, 1050 Explanation of Designation: • First two digits (10xx, 11xx, 12xx) indicate carbon steel series • Last two digits represent approximate carbon content in hundredths of a percent • “L” indicates leaded steel for improved machinability Typical Chemical Composition (varies by grade): • Carbon (C): 0.08% – 1.00% depending on grade • Manganese (Mn): Improves strength and machinability • Silicon (Si): Present as deoxidizer • Phosphorus (P): Limited to specified maximum values • Sulphur (S): Controlled or higher in free-machining grades Mechanical Properties (Typical – Grade Dependent): • High dimensional accuracy and improved strength • Good yield strength • Excellent machinability • Controlled hardness depending on condition Key Features: • Superior surface finish • Tight dimensional tolerances • Improved machinability • Consistent chemical composition • Suitable for precision components Material Characteristics: ASTM A108 carbon steel bars are produced through cold finishing processes that enhance surface quality and mechanical properties compared to hot-rolled bars. These steels provide excellent performance in machining operations and are ideal for applications requiring precision and uniformity. Applications: • Automotive components • Shafts and fasteners • Machine parts • Hydraulic fittings • Precision engineering components • Industrial equipment parts Conclusion: Ladhani Metal Corporation supplies premium quality ASTM A108 Carbon Steel Bars in various grades, sizes, and finishes. With excellent machinability, superior surface finish, and reliable performance, ASTM A108 bars are widely used in automotive, engineering, and industrial applications. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #ASTMA108 #ASTMA108Bars #CarbonSteelBars #SteelBars #ColdFinishedBars #ColdDrawnBars #BrightBars #CarbonSteel #AlloySteelBars #SteelRoundBars #SteelHexBars #SteelSquareBars #EngineeringSteel #IndustrialSteel #SteelManufacturer #SteelSupplier #SteelStockist #MetalIndustry #SteelIndustry #SteelProducts #BarStock #MachiningSteel #FreeCuttingSteel #PrecisionSteel #HighStrengthSteel #ConstructionSteel #InfrastructureSteel #AutomotiveSteel #ManufacturingSteel #SteelFabrication #HeavyEngineering #SteelTrading #GlobalSteel #IndiaSteel #MumbaiSteel #SteelExport #SteelImport #QualitySteel #SteelSolutions #IndustrialSupply #BarManufacturer #SteelDistributors #SteelWholesaler #SteelMarket #ColdFinishedSteel #BrightBarSupplier #SteelApplications #CarbonSteelProducts #EngineeringMaterials #MetalProducts #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ISO 683-11 Carbon Steel Bars are case hardening (carburizing) non-alloy steels designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. These steels are widely used in automotive and engineering applications where surface hardness and core strength are essential. Manufactured in accordance with ISO 683-11, this specification defines the technical delivery conditions, chemical composition, and mechanical properties for non-alloy case hardening steels supplied in the form of bars, rods, and other semi-finished products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ISO 683-11 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per ISO 683-11): C10, C15E4, C15E M2 (2a), C16E4, C16E M2 (3a), 20Cr4 (4), 20CrS4, 16MnCr5 (5), 16MnCrS5 (5a), 20MnCr5 (6), 20MnCrS5, 18CrMo4 (7), 18CrMoS4 (7a), 15NiCr13 (11), 20NiCrMo2 (12), 20NiCrMoS2 (12a), 17NiCrMo6 (13), 18CrNiMo7 (14) Explanation of Designation: • C – Carbon steel • Number – Approximate carbon content multiplied by 100 • Alloying elements (Cr, Mn, Ni, Mo) indicate alloy steel variants for improved hardenability • E – Special quality steel with controlled phosphorus and sulphur • S – Free machining variant with higher sulphur • Numbers in brackets – Reference to standard grade grouping Typical Chemical Composition (varies by grade): • Carbon (C): 0.10 – 0.25 depending on grade • Manganese (Mn): Improves strength and hardenability • Chromium (Cr), Nickel (Ni), Molybdenum (Mo): Present in alloy grades for enhanced performance • Silicon (Si): Used as deoxidizer • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 (higher in S grades) Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 350 – 700 MPa (depending on grade) • Yield Strength: ≥ 220 MPa • Elongation: ≥ 20% • Hardness (Core): 110 – 200 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Wide range of carbon and alloy case hardening grades • Good machinability in annealed condition • Tough and ductile core after heat treatment • Uniform case hardening characteristics Material Characteristics: ISO 683-11 steel bars include both plain carbon and low alloy case hardening steels. These materials are designed to develop a hard outer layer while maintaining a tough inner core, ensuring wear resistance combined with impact strength and durability. Applications: • Gears and pinions • Shafts and spindles • Automotive transmission components • Bushings and pins • Couplings and mechanical parts • Heavy-duty engineering components Conclusion: Ladhani Metal Corporation supplies high-quality ISO 683-11 Carbon Steel Bars in a wide range of grades, sizes, and finishes. With excellent carburizing properties and enhanced mechanical performance, these steels are widely used in automotive and industrial engineering sectors. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ISO68311 #ISO68311Steel #CaseHardeningSteel #CaseHardeningSteelBars #AlloySteelBars #EngineeringSteel #CarburizingSteel #SurfaceHardeningSteel #IndustrialSteelBars #SteelBarsSupplier #AlloySteelSupplier #SteelManufacturer #SteelExporter #SteelStockist #SteelIndia #ENSteelGrades #16MnCr5 #20MnCr5 #18CrNiMo7 #17CrNiMo6 #GearSteel #AutomotiveSteel #ForgingSteel #MachiningSteel #HighStrengthSteel #HeatTreatableSteel #QuenchedAndTemperedSteel #SteelRoundBar #SteelFlatBar #SteelSquareBar #SteelHexBar #BrightBars #HotRolledBars #ColdDrawnBars #AnnealedSteel #NormalizedSteel #HeavyEngineering #ConstructionSteel #IndustrialMaterials #MetalIndustry #PrecisionEngineering #MechanicalComponents #SteelGrades #AlloySteelRoundBar #SteelApplications #EngineeringMaterials #SteelProducts #SteelSupply #GlobalSteel #SteelBusiness#Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ISO 683-1 Carbon Steel Bars are high-quality heat-treatable non-alloy steels designed for general engineering and mechanical applications requiring reliable strength, toughness, and wear resistance. These steels are widely used for manufacturing machine parts that undergo machining, forming, and heat treatment processes. Manufactured in accordance with ISO 683-1, this specification defines the technical delivery conditions, chemical composition, and mechanical properties for non-alloy heat-treatable steels supplied in various product forms including bars, rods, plates, and sections. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ISO 683-1 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per ISO 683-1): C10, C15, C15E, C16E, C22, C25, C30, C35, C35E, C40, C45, C45E, C50, C55, C60, C67, C70, C75, C80 Explanation of Designation: • C – Carbon steel • Number – Approximate carbon content multiplied by 100 • E – Special quality steel with controlled phosphorus and sulphur Typical Chemical Composition (varies by grade): • Carbon (C): 0.10 – 0.80 depending on grade • Manganese (Mn): Improves strength and hardenability • Silicon (Si): Used as a deoxidizer • Phosphorus (P): Restricted to specified maximum limits • Sulphur (S): Controlled to maintain ductility and machinability Mechanical Properties (Typical – Grade Dependent): • Tensile Strength: Increases with carbon content • Yield Strength: Varies according to grade • Elongation: Controlled for ductility • Hardness: Depends on carbon content and heat treatment Key Features: • Wide range of heat-treatable carbon steels • Good machinability and formability • Suitable for quenching and tempering • Consistent chemical composition • Reliable mechanical performance Material Characteristics: ISO 683-1 carbon steel bars provide a versatile selection of low to high carbon steels suitable for various engineering applications. The controlled composition ensures predictable performance during machining and heat treatment, making these steels ideal for structural and mechanical components. Applications: • Shafts and axles • Gears and machine components • Bolts and fasteners • Automotive parts • Structural components • General engineering applications Conclusion: Ladhani Metal Corporation supplies premium quality ISO 683-1 Carbon Steel Bars in a wide range of grades, sizes, and finishes. With excellent mechanical properties, consistent quality, and versatility, ISO 683-1 steel bars are widely used in automotive, industrial, and engineering sectors. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ISO6831 #ISO6831Steel #ISO6831CarbonSteel #CarbonSteelBars #SteelBars #EngineeringSteel #CarbonSteelRoundBar #CarbonSteelFlatBar #CarbonSteelSquareBar #CarbonSteelHexBar #C45Steel #C40Steel #C35Steel #C30Steel #C25Steel #C50Steel #C55Steel #C60Steel #ENCarbonSteel #HeatTreatableSteel #QuenchedAndTemperedSteel #AlloySteelSupplier #CarbonSteelSupplier #SteelBarSupplier #IndustrialSteel #MechanicalSteel #ForgingSteel #MachiningSteel #AutomotiveSteel #HighStrengthSteel #SteelStockist #SteelManufacturer #SteelExporter #SteelIndia #BrightBars #HotRolledBars #ColdDrawnBars #AnnealedSteel #NormalizedSteel #SteelProducts #MetalIndustry #HeavyEngineering #ConstructionSteel #IndustrialMaterials #SteelGrades #CarbonSteelRod #SteelRoundBar #SteelFlatBar #SteelHexBar #SteelSquareBar #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10016-2 Non-Alloy Steel Rods are high-quality non-alloy steel wire rods designed for drawing and cold forming applications. These rods are produced through controlled hot rolling processes to ensure excellent surface quality, uniform microstructure, and reliable mechanical properties, making them suitable for the production of wires, fasteners, and other cold-formed components. Manufactured in accordance with EN 10016-2, this specification defines technical delivery conditions for non-alloy steel rods intended primarily for wire drawing and cold heading processes. The standard ensures consistent chemical composition, dimensional accuracy, and surface quality required for further processing. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10016-2 Non-Alloy Steel Rods, supplied with mill test certificates and strict quality inspection in compliance with European standards. Forms of Supply (as per specification): Hot rolled wire rods, Coiled rods, Drawn rods, Pickled rods, Shot blasted rods Available Grades (as per EN 10016-2): C4D, C7D, C9D, C10D, C12D, C15D, C18D, C20D Explanation of Designation: • C – Carbon steel • Number – Approximate carbon content multiplied by 100 • D – Steel suitable for drawing applications Typical Chemical Composition (varies by grade): • Carbon (C): 0.04 – 0.22 depending on grade • Manganese (Mn): Controlled to improve strength and drawing performance • Silicon (Si): Present in small amounts for deoxidation • Phosphorus (P): Limited to specified maximum levels • Sulphur (S): Controlled to maintain formability and surface quality Mechanical Properties (Typical – Grade Dependent): • Good ductility for cold forming • Moderate tensile strength • Excellent drawability • Uniform microstructure for consistent processing Key Features: • Excellent surface quality for wire drawing • Good cold forming properties • Consistent chemical composition • Reliable mechanical performance • Suitable for high-speed wire drawing processes Material Characteristics: EN 10016-2 non-alloy steel rods are specifically designed for wire drawing and cold heading operations. The controlled composition and hot rolling process provide a clean surface, uniform structure, and excellent ductility, ensuring efficient processing into wires and cold-formed components. Applications: • Wire drawing • Fasteners and bolts manufacturing • Nails and screws production • Springs and wire products • Cold heading components • Industrial wire applications Conclusion: Ladhani Metal Corporation supplies premium quality EN 10016-2 Non-Alloy Steel Rods in various grades and coil sizes. With excellent drawability, consistent quality, and reliable performance, EN 10016-2 steel rods are widely used in wire manufacturing, fasteners, and cold forming industries. For stock availability, customized specifications, or technical details, contact Ladhani Metal Corporation. #EN10016 #EN100162 #EN100162Rod #EN100162SteelRod #EN100162SteelBars #EN100162CarbonSteel #EN100162WireRod #EN100162ColdHeadingSteel #EN100162IndustrialSteel #EN100162EngineeringSteel #CarbonSteelRod #CarbonSteelBars #SteelRodSupplier #SteelBarSupplier #IndustrialSteelBars #HotRolledSteelRod #ColdHeadingSteelRod #WireRodSteel #FastenerSteelRod #AutomotiveSteelRod #EngineeringSteelBars #SteelRodManufacturer #SteelRodExporter #SteelRodStockist #SteelRodIndia #CarbonSteelRodSupplier #CarbonSteelBarStockist #AlloySteelRodSupplier #IndustrialSteelSupplier #MechanicalSteelBars #PrecisionSteelRod #ForgingSteelRod #MachineGradeSteelRod #ColdFormingSteelRod #SteelRodStock #SteelRodSupply #SteelBarExporter #RoundSteelRod #RoundSteelBar #StructuralSteelRod #SteelProductsIndia #EngineeringMaterials #SteelIndustry #SteelManufacturing #SteelDistribution #SteelRodTrading #BulkSteelSupply #IndustrialRawMaterials #SteelSolutions #MetalSupply #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

JIS G 4105 Alloy Steel Bars are high-performance alloy steels developed for machine structural applications requiring excellent strength, hardenability, and toughness. These steels typically contain chromium and molybdenum alloying elements that improve wear resistance, fatigue strength, and heat treatment response, making them suitable for demanding engineering components. Manufactured in accordance with JIS G 4105, this specification defines the chemical composition, mechanical properties, and technical delivery conditions for chromium-molybdenum alloy steels used in mechanical and structural applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of JIS G 4105 Alloy Steel Bars, supplied with mill test certificates and strict quality inspection to meet international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per JIS G 4105): SCM415H, SCM420H, SCM430H, SCM435H, SCM440H Explanation of JIS Designation: • S – Steel • C – Chromium • M – Molybdenum • H – Hardenability guaranteed steel • Numbers – Indicate approximate carbon content and strength classification Typical Chemical Composition (varies by grade): • Carbon (C): Controlled according to grade designation • Manganese (Mn): Improves strength and hardenability • Chromium (Cr): Enhances wear resistance and strength • Molybdenum (Mo): Improves hardenability and high-temperature strength • Silicon (Si): Used as a deoxidizer • Phosphorus (P) & Sulphur (S): Restricted to specified maximum limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Excellent yield strength • Good fatigue resistance • Superior toughness • Hardness varies depending on heat treatment condition Key Features: • Guaranteed hardenability • Excellent strength and toughness • Good machinability in annealed condition • Suitable for quenching and tempering • Reliable performance under heavy loads Material Characteristics: JIS G 4105 alloy steel bars provide improved hardenability control compared to standard alloy steels. The presence of chromium and molybdenum enhances strength, wear resistance, and heat treatment performance, making these steels suitable for critical engineering components requiring consistent mechanical properties. Applications: • Automotive gears and shafts • Transmission components • Crankshafts and axles • Heavy-duty fasteners • Industrial machinery components • Engineering structural parts Conclusion: Ladhani Metal Corporation supplies premium quality JIS G 4105 Alloy Steel Bars in various grades, sizes, and finishes. With guaranteed hardenability and superior mechanical performance, JIS G 4105 steel bars are widely used in automotive, machinery, and heavy engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #JISG4105 #JISG4105Steel #JISG4105AlloySteel #JISG4105SteelBars #JISG4105RoundBars #SCMSteel #SCMAlloySteel #SCM415 #SCM420 #SCM430 #SCM432 #SCM435 #SCM440 #SCM445 #SCM822 #AlloySteelBars #AlloySteelRoundBars #AlloySteelSupplier #AlloySteelManufacturer #EngineeringSteel #IndustrialSteel #SteelBars #SteelRoundBars #ForgedSteelBars #HotRolledSteelBars #SpecialSteel #MachineSteel #HeatTreatableSteel #HighStrengthSteel #StructuralSteel #AutomotiveSteel #MechanicalEngineering #EngineeringMaterials #SteelIndustry #MetalIndustry #SteelExport #SteelStockist #SteelDistributor #SteelSupplier #AlloySteelIndia #IndustrialMaterials #ManufacturingSteel #PrecisionSteel #HeavyEngineering #MetalProcessing #SteelApplications #JISSteel #JISStandard #QualitySteel #IndustrialAlloySteel #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

JIS G 4103 Alloy Steel Bars are high-strength alloy steels designed primarily for machine structural applications requiring excellent hardenability, toughness, and fatigue resistance. These steels contain alloying elements such as chromium, molybdenum, and manganese that enhance mechanical performance and improve response to heat treatment processes. Manufactured in accordance with JIS G 4103, this specification defines the chemical composition, mechanical properties, and technical delivery requirements for chromium-molybdenum alloy steels used in mechanical and structural components. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of JIS G 4103 Alloy Steel Bars, supplied with mill test certificates and strict quality inspection to meet international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per JIS G 4103): SCM415, SCM418, SCM420, SCM430, SCM435, SCM440, SCM445 Explanation of JIS Designation: • S – Steel • C – Chromium alloy steel • M – Molybdenum • Numbers – Indicate approximate carbon content and strength classification Typical Chemical Composition (varies by grade): • Carbon (C): Controlled according to grade designation • Manganese (Mn): Improves strength and hardenability • Chromium (Cr): Enhances wear resistance and strength • Molybdenum (Mo): Improves hardenability and high-temperature strength • Silicon (Si): Used as a deoxidizer • Phosphorus (P) & Sulphur (S): Restricted to specified maximum limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Excellent yield strength • Good fatigue resistance • Superior toughness • Hardness varies depending on heat treatment condition Key Features: • Excellent hardenability • High strength and toughness • Good machinability in annealed condition • Suitable for quenching and tempering • Reliable performance under heavy loads Material Characteristics: JIS G 4103 alloy steel bars provide excellent mechanical properties due to the presence of chromium and molybdenum. These steels are capable of achieving high strength and wear resistance after heat treatment while maintaining good toughness, making them ideal for demanding industrial applications. Applications: • Automotive transmission components • Gears and shafts • Crankshafts and axles • Heavy-duty fasteners • Industrial machinery components • Engineering structural parts Conclusion: Ladhani Metal Corporation supplies premium quality JIS G 4103 Alloy Steel Bars in various grades, sizes, and finishes. With excellent strength, durability, and heat treatment response, JIS G 4103 steel bars are widely used in automotive, heavy engineering, and industrial machinery applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #JISG4103 #JISG4103Steel #JISG4103AlloySteel #JISG4103SteelBars #JISG4103RoundBars #AlloySteelBars #AlloySteelRoundBars #AlloySteelSupplier #AlloySteelManufacturer #EngineeringSteel #IndustrialSteel #SteelBars #SteelRoundBars #ForgedSteelBars #HotRolledSteelBars #AlloySteelProducts #SpecialSteel #MachineSteel #StructuralSteel #HighStrengthSteel #HeatTreatableSteel #AutomotiveSteel #ConstructionSteel #EngineeringMaterials #SteelIndustry #MetalIndustry #SteelExport #SteelStockist #SteelDistributor #SteelSupplierIndia #AlloySteelIndia #IndustrialMaterials #ManufacturingSteel #PrecisionSteel #HeavyEngineering #MechanicalEngineering #MetalProcessing #SteelApplications #AlloySteelGrades #JISSteel #JISStandard #JISSteelBars #SCMSteel #SCM415 #SCM420 #SCM435 #SCM440 #QualitySteel #IndustrialAlloySteel #SteelSolutions #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli

JIS G 4053 Alloy Steel Bars are high-performance alloy steels designed for machine structural applications that require higher strength, toughness, and hardenability compared to plain carbon steels. These steels contain alloying elements such as chromium, molybdenum, and nickel that improve wear resistance, fatigue strength, and heat treatment response. Manufactured in accordance with JIS G 4053, this specification defines the chemical composition, mechanical properties, and technical delivery conditions for alloy steels used in structural and mechanical components. These steels are widely used in automotive, heavy machinery, and industrial engineering applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of JIS G 4053 Alloy Steel Bars, supplied with mill test certificates and strict quality inspection to meet international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per JIS G 4053): SCr415, SCr420, SCr430, SCM415, SCM418, SCM420, SCM430, SNC415, SNC631, SNCM220, SNCM420, SNCM431, SNCM439, SMn420, SMn433, SACM645 Explanation of JIS Designation: • S – Steel • Cr – Chromium alloy steel • CM – Chromium Molybdenum steel • NC – Nickel Chromium steel • NCM – Nickel Chromium Molybdenum steel • Mn – Manganese steel • Numbers – Indicate approximate composition and strength classification Typical Chemical Composition (varies by grade): • Carbon (C): Controlled according to grade designation • Manganese (Mn): Improves strength and hardenability • Chromium (Cr): Enhances wear resistance and strength • Nickel (Ni): Improves toughness and impact resistance • Molybdenum (Mo): Increases hardenability and high temperature strength • Phosphorus (P) & Sulphur (S): Restricted to specified maximum limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Excellent yield strength • Good fatigue resistance • Superior toughness • Hardness varies depending on heat treatment condition Key Features: • Excellent hardenability • High strength and wear resistance • Good machinability in annealed condition • Suitable for carburizing and heat treatment • Reliable performance under heavy loads Material Characteristics: JIS G 4053 alloy steel bars provide superior mechanical properties due to alloying elements such as chromium, nickel, and molybdenum. These steels are capable of achieving high hardness after heat treatment while maintaining toughness, making them suitable for demanding engineering applications. Applications: • Automotive gears and transmission parts • Shafts and axles • Crankshafts and connecting rods • Heavy-duty fasteners • Industrial machinery components • Engineering structural parts Conclusion: Ladhani Metal Corporation supplies premium quality JIS G 4053 Alloy Steel Bars in various grades, sizes, and finishes. With excellent strength, toughness, and heat treatment response, JIS G 4053 steel bars are widely used in automotive, machinery, and heavy engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #JISG4053 #JISG4053Steel #JISG4053AlloySteel #JISG4053SteelBars #JISG4053AlloySteelBars #JISG4053RoundBars #JISG4053SteelSupplier #JISG4053SteelManufacturer #JISG4053SteelStockist #JISAlloySteel #AlloySteelBars #AlloySteelRoundBars #AlloySteelBarSupplier #AlloySteelManufacturer #AlloySteelStockist #EngineeringAlloySteel #EngineeringSteelBars #AlloyStructuralSteel #MachineStructuralAlloySteel #IndustrialAlloySteel #IndustrialSteelBars #IndustrialSteelSupplier #IndustrialSteelProducts #PrecisionSteelBars #HighStrengthSteelBars #HeatTreatedSteelBars #SteelBarManufacturer #SteelBarSupplier #SteelBarStockist #SteelRoundBarSupplier #SteelRoundBarManufacturer #AlloySteelProducts #SteelForEngineering #SteelForMachining #SteelForAutomotive #MetalIndustry #SteelIndustry #SpecialSteelBars #HighQualityAlloySteel #SteelBarsIndia #SteelSupplierIndia #ManufacturingMaterials #HeavyEngineeringSteel #MachinerySteelBars #IndustrialMachiningSteel #SteelMaterialSupplier #EngineeringSteelSupplier #MetalManufacturing #SteelSolutions #LadhaniMetalCorporation #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

JIS G 4051 Carbon Steel Bars JIS G 4051 Carbon Steel Bars are high-quality carbon steels widely used for machine structural applications where reliable strength, toughness, and machinability are required. These steels are designed for components that undergo machining, forging, and heat treatment processes in automotive, machinery, and engineering industries. Manufactured in accordance with JIS G 4051, this specification defines chemical composition, mechanical properties, and technical requirements for carbon steels used in machine parts and structural components. The standard covers a wide range of carbon steel grades supplied in hot rolled, normalized, annealed, or heat-treated conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of JIS G 4051 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection to meet international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per JIS G 4051): S9CK, S10C, S12C, S15C, S17C, S20C, S22C, S25C, S28C, S30C, S33C, S35C, S38C, S40C, S43C, S45C, S48C, S50C, S53C, S55C, S58C Explanation of JIS Designation: • S – Steel • Number – Approximate carbon content multiplied by 100 • C – Carbon steel Typical Chemical Composition (varies by grade): • Carbon (C): 0.08% – 0.60% depending on grade • Manganese (Mn): Controlled for strength and hardenability • Silicon (Si): Used as a deoxidizer • Phosphorus (P): Limited to specified maximum values • Sulphur (S): Restricted to maintain quality and machinability Mechanical Properties (Typical – Grade Dependent): • Tensile Strength: Increases with carbon content • Yield Strength: Varies according to grade and heat treatment • Elongation: Controlled for ductility requirements • Hardness: Depends on carbon content and processing condition Key Features: • Wide range of machine structural carbon steels • Good machinability and formability • Suitable for heat treatment processes • Consistent chemical composition • Reliable mechanical performance Material Characteristics: JIS G 4051 carbon steel bars provide dependable strength and durability for mechanical components. The wide variety of grades allows engineers to select suitable carbon content depending on the required hardness, strength, and machinability. Applications: • Automotive shafts and axles • Machine components • Gears and pins • Bolts and fasteners • Structural machine parts • Industrial equipment components Conclusion: Ladhani Metal Corporation supplies premium quality JIS G 4051 Carbon Steel Bars in various grades, sizes, and finishes. With excellent machinability, reliable mechanical properties, and wide industrial usage, JIS G 4051 steel bars are widely used in automotive, engineering, and manufacturing industries. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #JISG4051 #JISG4051Steel #JISG4051CarbonSteel #JISG4051SteelBars #JISG4051RoundBars #JISG4051CarbonSteelBars #JISG4051MachineStructuralSteel #JISG4051SteelSupplier #JISG4051SteelManufacturer #JISG4051SteelStockist #CarbonSteelBars #CarbonSteelRoundBars #CarbonSteelBarSupplier #CarbonSteelManufacturer #CarbonSteelStockist #CarbonSteelProducts #EngineeringSteelBars #MachineStructuralSteel #MachineStructuralSteelBars #IndustrialSteelBars #IndustrialSteelSupplier #IndustrialSteelProducts #StructuralCarbonSteel #StructuralSteelBars #EngineeringMaterials #SteelBarManufacturer #SteelBarSupplier #SteelBarStockist #SteelRoundBarSupplier #SteelRoundBarManufacturer #AlloyAndCarbonSteel #SteelForEngineering #SteelForMachining #SteelForIndustrialUse #MetalIndustry #SteelIndustry #PrecisionSteelBars #HighQualitySteelBars #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

SAE J404 Alloy Steel Bars are high-quality alloy steel bars defined by the SAE system for alloy steels used in structural and mechanical applications. These steels contain alloying elements such as chromium, nickel, molybdenum, and manganese that enhance strength, hardenability, toughness, and wear resistance compared to plain carbon steels. Manufactured in accordance with SAE J404, this specification establishes the chemical composition limits for SAE alloy steels used in semifinished products, hot-rolled bars, cold-finished bars, wire rods, plates, sheets, strip, welded tubing, and seamless tubing. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SAE J404 Alloy Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per SAE J404): 1330, 1335, 1340, 1345, 4023, 4024, 4027, 4028, 4037, 4047, 4118, 4120, 4121, 4130, 4135, 4137, 4140, 4142, 4145, 4147, 4150, 4161, 4320, 4340, 4615, 4620, 4621, 4626, 4720, 4815, 4820, 5115, 5117, 5120, 5130, 5140, 5150, 5160, 52100, 6118, 6150, 8615, 8620, 8630, 8640, 8645, 8655, 8720, 8740, 8822, 9255, 9259, 9260 Explanation of SAE Designation: • The first digit indicates the principal alloying element • The second digit indicates the alloy series or modification • The last two digits represent the approximate carbon content in hundredths of a percent Typical Chemical Composition (varies by grade): • Carbon (C): As per grade designation • Manganese (Mn): Improves strength and hardenability • Chromium (Cr): Enhances wear resistance and corrosion resistance • Nickel (Ni): Increases toughness and impact strength • Molybdenum (Mo): Improves hardenability and high-temperature strength • Phosphorus (P) & Sulphur (S): Restricted to specified maximum limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Excellent yield strength • Good fatigue resistance • Improved toughness • Hardness varies according to heat treatment condition Key Features: • Excellent hardenability • High strength and toughness • Good machinability in annealed condition • Suitable for carburizing and heat treatment • Reliable performance in heavy-duty applications Material Characteristics: SAE J404 alloy steel bars provide superior mechanical performance due to the presence of alloying elements such as chromium, nickel, and molybdenum. These steels are designed to perform well under high stress, impact, and wear conditions, making them suitable for demanding industrial applications. Applications: • Automotive gears and shafts • Crankshafts and axles • Heavy-duty fasteners • Industrial machinery components • Oil and gas equipment parts • Structural engineering components Conclusion: Ladhani Metal Corporation supplies high-quality SAE J404 Alloy Steel Bars in a wide range of grades, sizes, and finishes. With excellent strength, durability, and heat treatment response, SAE J404 steel bars are widely used in automotive, heavy engineering, and industrial machinery sectors. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #SAEJ404 #SAEJ404Steel #SAEJ404AlloySteel #SAEJ404SteelBars #SAEJ404AlloySteelBars #AlloySteelBars #AlloySteel #EngineeringSteel #IndustrialSteel #AlloySteelSupplier #SteelBarSupplier #AlloySteelManufacturer #SteelStockist #SteelBarStockist #SteelProducts #AlloySteelGrades #AlloySteelSpecifications #SteelIndustry #MetalsIndustry #SteelManufacturing #AlloySteelApplications #HighStrengthSteel #HeatTreatableSteel #ForgingSteel #EngineeringMaterials #MechanicalEngineeringMaterials #IndustrialMaterials #SteelForEngineering #SteelForManufacturing #IndustrialEngineering #SteelSolutions #QualitySteel #AlloySteelMaterial #EngineeringAlloySteel #IndustrialSteelBars #CarbonAlloySteel #PrecisionSteelBars #SteelBarManufacturing #AlloySteelEngineering #HeavyDutySteel #SteelForMachining #IndustrialMetal #GlobalSteelMarket #SteelSupply #SteelDistribution #MetalProducts #SteelProcessing #EngineeringComponents #StructuralSteel #ManufacturingIndustry #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada

SAE J403 Carbon Steel Bars are widely used carbon steel products designed to meet the chemical composition requirements defined by the SAE system for carbon steels. These steels are commonly used for manufacturing mechanical and structural components where reliable strength, machinability, and heat treatment response are required. Manufactured in accordance with SAE J403, this specification establishes the chemical composition limits for a wide range of carbon steels used in semifinished products, hot-rolled bars, cold-finished bars, wire rods, plates, sheets, strip, welded tubing, and seamless tubing. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SAE J403 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per SAE J403): 1005, 1006, 1008, 1010, 1012, 1015, 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1025, 1026, 1030, 1035, 1040, 1045, 1050, 1055, 1060, 1070, 1075, 1080, 1085, 1090, 1095, 1110, 1117, 1118, 1119, 1120, 1126, 1137, 1141, 1144, 1146, 1151, 1155, 1157, 1159, 1211, 1212, 1213, 1215, 1218, 1221 Explanation of SAE Designation: • The first two digits indicate the steel type (10xx – plain carbon steel) • The last two digits indicate the approximate carbon content in hundredths of a percent Typical Chemical Composition (varies by grade): • Carbon (C): 0.05% – 1.00% depending on grade • Manganese (Mn): Controlled to improve strength and hardenability • Silicon (Si): Present in small amounts for deoxidation • Phosphorus (P): Restricted to specified maximum limits • Sulphur (S): Controlled depending on machinability requirements Mechanical Properties (Typical – Grade Dependent): • Tensile Strength: Varies with carbon content • Yield Strength: Grade dependent • Elongation: Controlled for ductility • Hardness: Increases with carbon content and heat treatment Key Features: • Wide range of carbon steel grades • Good machinability and formability • Suitable for heat treatment • Consistent chemical composition • Reliable mechanical performance Material Characteristics: SAE J403 carbon steel bars provide a broad selection of low, medium, and high carbon steels suitable for various industrial applications. The standardized chemical composition ensures consistent material performance and compatibility with machining, forging, and heat treatment processes. Applications: • Automotive components • Shafts and axles • Fasteners and bolts • Machinery parts • Structural components • General engineering applications Conclusion: Ladhani Metal Corporation supplies high-quality SAE J403 Carbon Steel Bars in multiple grades, sizes, and finishes. With dependable chemical composition control and versatile mechanical properties, SAE J403 bars are widely used in automotive, construction, and industrial manufacturing sectors. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #SAEJ403 #SAEJ403Steel #SAEJ403CarbonSteel #SAEJ403Bars #CarbonSteelBars #CarbonSteelBarSupplier #CarbonSteelManufacturer #EngineeringSteel #CarbonSteelGrades #SteelBars #AlloySteelBars #IndustrialSteel #ForgingSteel #HotRolledSteelBars #ColdFinishedSteelBars #SteelBarStockist #SteelBarSupplier #SteelIndustry #MetalIndustry #IndustrialMaterials #SteelProducts #MechanicalSteel #SteelForForging #SteelForMachining #AutomotiveSteel #ConstructionSteel #ManufacturingMaterials #SAEStandards #SteelSpecifications #SteelGrades #CarbonSteelProducts #BarStockist #SteelDistributors #EngineeringMaterials #IndustrialApplications #SteelSolutions #HighQualitySteel #PrecisionSteelBars #SteelProcessing #SteelManufacturing #MaterialEngineering #SteelComponents #MetalProducts #SteelSupply #SteelExporters #IndustrialSupply #SteelMarket #MetalEngineering #BarMaterials #SteelTechnology #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur

ASTM A355 Nitriding Alloy Steel Bars are special alloy steel bars developed for nitriding heat treatment processes to produce a hard, wear-resistant surface while maintaining a tough and strong core. These steels contain alloying elements such as aluminum, chromium, molybdenum, and vanadium that promote the formation of stable nitrides during nitriding, resulting in excellent surface hardness and fatigue resistance. Manufactured in accordance with ASTM A355, this specification covers alloy steel bars intended specifically for nitriding applications. The controlled chemical composition ensures uniform nitriding response, high surface hardness, and improved resistance to wear and fatigue. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ASTM A355 Nitriding Alloy Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Forged bars, Peeled bars, Turned bars, Ground bars Available Grades (as per ASTM A355): Class A, Class B, Class C, Class D Scope of Specification: • Covers alloy steel bars intended for nitriding heat treatment • Designed to develop very high surface hardness without distortion • Contains aluminum and other alloying elements that form stable nitrides • Suitable for precision components requiring wear resistance Typical Chemical Composition (varies by class): • Carbon (C): Controlled low to medium carbon content • Manganese (Mn): Provides strength and hardenability • Chromium (Cr): Improves wear resistance and strength • Molybdenum (Mo): Enhances high-temperature strength and hardenability • Aluminum (Al): Promotes formation of hard nitrides during nitriding • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.040 Mechanical Properties (Typical – Class Dependent): • High core strength • Excellent fatigue resistance • Good toughness • Surface hardness up to approximately 900–1100 HV after nitriding Key Features: • Excellent nitriding response • Very high surface hardness after treatment • Superior wear resistance • Minimal distortion during heat treatment • Excellent fatigue strength Material Characteristics: ASTM A355 nitriding alloy steel bars are specifically engineered to develop a hard nitrided surface layer while maintaining a tough and ductile core. The alloying elements present in the steel promote stable nitride formation, which significantly improves wear resistance, fatigue strength, and service life in demanding applications. Applications: • Gears and gear shafts • Crankshafts • Camshafts • Cylinder liners • Valve parts • Dies and tooling components • Precision mechanical parts Conclusion: Ladhani Metal Corporation supplies premium quality ASTM A355 Nitriding Alloy Steel Bars in various sizes and finishes. With excellent nitriding properties, superior wear resistance, and reliable mechanical performance, ASTM A355 steel bars are widely used in automotive, aerospace, and heavy engineering industries. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #ASTMA355 #ASTMA355Steel #ASTMA355Bars #ASTMA355NitridingSteel #ASTMA355SteelBars #ASTMA355Specification #ASTMA355AlloySteel #ASTMA355RoundBars #ASTMA355FlatBars #ASTMA355ForgedBars #ASTMA355Supplier #ASTMA355Manufacturer #ASTMA355Stockist #ASTMA355Exporters #ASTMA355Material #ASTMA355Grade #ASTMA355HeatTreatmentSteel #ASTMA355NitridingBars #NitridingSteelBars #NitridingAlloySteel #AlloySteelBars #AlloySteelSupplier #EngineeringSteelBars #IndustrialSteelBars #HeatTreatmentSteel #CaseHardeningSteel #NitridedSteel #PrecisionSteelBars #MechanicalSteelBars #HighStrengthSteel #WearResistantSteel #SurfaceHardeningSteel #HeavyEngineeringSteel #MachineComponentSteel #AutomotiveSteelBars #GearSteelBars #ShaftSteelBars #ForgingSteelBars #IndustrialAlloySteel #ASTMSteelBars #ASTMAlloySteel #SteelBarSupplier #SteelBarManufacturer #SteelBarStockist #SteelBarExporters #QualitySteelBars #HighPerformanceSteel #EngineeringAlloySteel #IndustrialMaterials #MetalSupplier #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot#Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ASTM A322 Alloy Steel Bars are hot-wrought alloy steel bars designed for applications requiring enhanced strength, toughness, and hardenability compared to carbon steel grades. These bars are widely used in automotive, heavy engineering, and machinery components where superior mechanical performance is essential. Manufactured in accordance with ASTM A322, this specification covers hot-wrought alloy steel bars intended for structural and mechanical applications. The standard defines chemical composition limits, quality requirements, and manufacturing conditions for various alloy steel grades. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of ASTM A322 Alloy Steel Bars, offering consistent quality material with mill test certificates and strict inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Forged bars, Peeled bars, Turned bars, Ground bars Available Grades (as per ASTM A322): 1330, 1335, 1340, 1345, 4023, 4024, 4027, 4028, 4037, 4047, 4118, 4120, 4121, 4130, 4137, 4140, 4142, 4145, 4147, 4150, 4161, 4320, 4340, E4340, 4615, 4620, 4621, 4626, 4720, 4815, 4820, 5117, 5130, 5140, 5160, 6118, 6150, 8615, 8620, 8640, 8645, 8655, 8720, 8740, 8822, 9259, 9260, 50B44, 50B46, 50B50, 50B60, 51B60, 81B45, 94B17, 94B30 Scope of Specification: • Covers hot-wrought alloy steel bars • Includes chromium, nickel, molybdenum, boron and other alloying elements • Suitable for heat treatment processes such as quenching and tempering • Designed for applications requiring high strength and fatigue resistance Typical Chemical Composition (varies by grade): • Carbon (C): As per grade designation • Manganese (Mn): Controlled for strength and hardenability • Chromium (Cr): Improves wear resistance and strength • Nickel (Ni): Enhances toughness and impact resistance • Molybdenum (Mo): Increases hardenability and high-temperature strength • Boron (B): Present in boron grades for improved hardenability • Phosphorus (P) & Sulphur (S): Restricted to specified maximum limits Mechanical Properties (Typical – Grade Dependent): • High tensile strength • Excellent yield strength • Good impact resistance • Enhanced fatigue strength • Hardness varies according to heat treatment condition Key Features: • Superior strength-to-weight ratio • Excellent hardenability • Good machinability in annealed condition • Suitable for carburizing and heat treatment • Reliable performance under dynamic loads Material Characteristics: ASTM A322 alloy steel bars provide improved mechanical performance due to alloying elements such as chromium, nickel, molybdenum, and boron. These elements enhance hardenability, wear resistance, and toughness, making the bars suitable for demanding structural and mechanical applications. Applications: • Automotive transmission components • Gears and shafts • Crankshafts and axles • Heavy-duty fasteners • Industrial machinery parts • Oil and gas equipment components Conclusion: Ladhani Metal Corporation supplies high-quality ASTM A322 Alloy Steel Bars in a wide range of grades and sizes to meet diverse industrial requirements. With excellent strength, durability, and heat treatment response, ASTM A322 steel bars are widely used in automotive, engineering, and heavy equipment sectors. For stock availability, customized dimensions, or technical specifications, contact Ladhani Metal Corporation. #ASTMA322 #ASTMA322Bars #AlloySteelBars #ASTMA322AlloySteel #HotWroughtSteel #AlloySteelRoundBars #AlloySteelManufacturer #AlloySteelSupplier #AlloySteelStockist #EngineeringSteel #CarbonAlloySteel #SteelBarsIndia #AlloySteelExport #IndustrialSteel #MechanicalSteel #UNSSteelGrades #SAESteelGrades #AlloySteelApplications #HeavyEngineeringSteel #AutomotiveSteel #GearSteel #ShaftSteel #ForgingSteel #PowerPlantSteel #OilAndGasSteel #ConstructionSteel #HeatTreatableSteel #HighStrengthSteel #SteelIndustry #MetalIndustry #SteelProducts #AlloySteelIndia #ASTMSpecification #ASTMSteel #SteelStandards #RoundBarsSupplier #SteelBarManufacturer #IndustrialRawMaterial #PrecisionEngineeringSteel #MachinerySteel #ToolingSteel #SteelDistributors #MetalStockist #AlloySteelRoundBar #ASTMA322RoundBars #SteelMaterial #EngineeringMaterials #InfrastructureSteel #ManufacturingIndustry #QualitySteel #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20NiCrMo13-4 is a high-alloy nickel-chromium-molybdenum carburizing steel grade designed for components requiring an extremely hard, wear-resistant surface combined with a very tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon and elevated alloy content, this grade offers excellent hardenability, deep case hardening capability, superior fatigue strength, and high resistance to shock loading in demanding applications. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMo13-4 steel is widely used in heavy-duty gear manufacturing, power transmission systems, mining equipment, and critical automotive components. Nickel significantly enhances core toughness and impact resistance, chromium improves wear resistance and case depth, while molybdenum increases hardenability and resistance to tempering, ensuring long service life under severe operating conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMo13-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20NiCrMo13-4): • 20 – Approx. 0.20% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • 13-4 – Alloy content classification (nickel/chromium and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 3.00 – 3.50 • Chromium (Cr): 1.20 – 1.60 • Molybdenum (Mo): 0.25 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 1050 – 1250 MPa • Yield Strength: ≥ 850 MPa • Elongation: ≥ 7% • Hardness (Core): 320 – 380 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent deep case hardening capability • Very high core toughness due to elevated nickel content • Superior hardenability and wear resistance • Enhanced resistance to tempering and thermal softening • Suitable for critical and heavily loaded components Material Characteristics: EN 10084 20NiCrMo13-4 round bars provide an exceptional balance of deep surface hardness and strong core strength. The higher alloy content ensures consistent case depth, improved load-bearing capacity, and reliable long-term performance in demanding mechanical environments. Applications: • Heavy-duty gears and gear shafts • Mining and cement plant gear systems • Industrial gearbox and drive components • Power transmission shafts • High-load pinions and couplings • Case hardened components subjected to severe cyclic and shock stresses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMo13-4 round bars in various diameters and finishes. With superior hardenability, deep carburizing response, and outstanding mechanical performance, 20NiCrMo13-4 steel is widely preferred for demanding industrial and automotive engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 18CrNiMo7-6 is a premium chromium-nickel-molybdenum alloy carburizing steel grade designed for highly stressed components requiring an extremely hard, wear-resistant surface combined with a very tough and high-strength core after carburizing and heat treatment. With approximately 0.18% carbon and high alloy content, this grade offers exceptional hardenability, deep case hardening capability, and outstanding fatigue strength under heavy dynamic and shock loading conditions. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrNiMo7-6 steel is widely used in heavy-duty gear manufacturing, wind turbine gearboxes, mining equipment, and critical automotive transmission applications. Nickel enhances core toughness and impact resistance, chromium improves wear resistance and case depth, while molybdenum increases hardenability and resistance to tempering, ensuring long service life under severe operating conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrNiMo7-6 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18CrNiMo7-6): • 18 – Approx. 0.18% carbon content • Cr – Chromium alloyed steel • Ni – Nickel alloyed steel • Mo – Molybdenum alloyed steel • 7-6 – Alloy content classification (chromium/nickel and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.15 – 0.21 • Manganese (Mn): 0.50 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.50 – 1.80 • Nickel (Ni): 1.40 – 1.70 • Molybdenum (Mo): 0.25 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 1000 – 1200 MPa • Yield Strength: ≥ 800 MPa • Elongation: ≥ 8% • Hardness (Core): 300 – 360 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent deep case hardening capability • Superior hardenability and uniform case depth • Outstanding core toughness and fatigue strength • High resistance to wear and shock loading • Suitable for critical heavy-duty applications Material Characteristics: EN 10084 18CrNiMo7-6 round bars provide an exceptional combination of deep surface hardness and robust core strength. The balanced alloy composition ensures enhanced wear resistance, high load-bearing capacity, and long-term performance in demanding mechanical environments. Applications: • Heavy-duty gears and gear shafts • Wind turbine gearbox components • Mining and cement plant gear systems • Automotive transmission and differential components • Industrial drive systems • High-load pinions and shafts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18CrNiMo7-6 round bars in various diameters and finishes. With superior hardenability, deep carburizing capability, and exceptional mechanical strength, 18CrNiMo7-6 steel is widely preferred for demanding industrial and automotive engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 18CrNiMo7-6 is a premium chromium-nickel-molybdenum alloy carburizing steel grade designed for highly stressed components requiring an extremely hard, wear-resistant surface combined with a very tough and high-strength core after carburizing and heat treatment. With approximately 0.18% carbon and high alloy content, this grade offers exceptional hardenability, deep case hardening capability, and outstanding fatigue strength under heavy dynamic and shock loading conditions. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrNiMo7-6 steel is widely used in heavy-duty gear manufacturing, wind turbine gearboxes, mining equipment, and critical automotive transmission applications. Nickel enhances core toughness and impact resistance, chromium improves wear resistance and case depth, while molybdenum increases hardenability and resistance to tempering, ensuring long service life under severe operating conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrNiMo7-6 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18CrNiMo7-6): • 18 – Approx. 0.18% carbon content • Cr – Chromium alloyed steel • Ni – Nickel alloyed steel • Mo – Molybdenum alloyed steel • 7-6 – Alloy content classification (chromium/nickel and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.15 – 0.21 • Manganese (Mn): 0.50 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.50 – 1.80 • Nickel (Ni): 1.40 – 1.70 • Molybdenum (Mo): 0.25 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 1000 – 1200 MPa • Yield Strength: ≥ 800 MPa • Elongation: ≥ 8% • Hardness (Core): 300 – 360 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent deep case hardening capability • Superior hardenability and uniform case depth • Outstanding core toughness and fatigue strength • High resistance to wear and shock loading • Suitable for critical heavy-duty applications Material Characteristics: EN 10084 18CrNiMo7-6 round bars provide an exceptional combination of deep surface hardness and robust core strength. The balanced alloy composition ensures enhanced wear resistance, high load-bearing capacity, and long-term performance in demanding mechanical environments. Applications: • Heavy-duty gears and gear shafts • Wind turbine gearbox components • Mining and cement plant gear systems • Automotive transmission and differential components • Industrial drive systems • High-load pinions and shafts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18CrNiMo7-6 round bars in various diameters and finishes. With superior hardenability, deep carburizing capability, and exceptional mechanical strength, 18CrNiMo7-6 steel is widely preferred for demanding industrial and automotive engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.

EN 10084 20NiCrMoS6-4 is a high-performance nickel-chromium-molybdenum alloy carburizing steel with controlled sulphur content, designed for components requiring a very hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon and higher alloy content, this grade offers excellent hardenability, deep case hardening capability, superior fatigue strength, and improved machinability due to sulphur addition. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMoS6-4 steel is widely used in automotive, heavy-duty gearbox manufacturing, and critical engineering applications. Nickel enhances core toughness and impact resistance, chromium improves wear resistance and case depth, molybdenum increases hardenability and tempering resistance, while sulphur ensures efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMoS6-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20NiCrMoS6-4): • 20 – Approx. 0.20% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • S – Increased sulphur content for improved machinability • 6-4 – Alloy content classification (nickel/chromium and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.40 – 1.70 • Chromium (Cr): 1.50 – 1.80 • Molybdenum (Mo): 0.25 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 1000 – 1200 MPa • Yield Strength: ≥ 750 MPa • Elongation: ≥ 8% • Hardness (Core): 300 – 360 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent deep case hardening capability • Improved machinability due to controlled sulphur content • Superior hardenability from nickel, chromium, and molybdenum • High fatigue strength under heavy cyclic loads • Enhanced resistance to tempering and softening Material Characteristics: EN 10084 20NiCrMoS6-4 round bars combine deep carburizing response with strong core strength and improved machining efficiency. The higher alloy content ensures consistent case depth and superior wear resistance, while sulphur supports precision machining prior to heat treatment. Applications: • Heavy-duty gears and gear shafts • Automotive transmission and differential components • Industrial gearbox parts • High-load drive shafts • Pinions and precision machined components • Case hardened parts subjected to severe dynamic stresses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMoS6-4 round bars in various diameters and finishes. With excellent hardenability, deep case hardening properties, improved machinability, and superior mechanical performance, 20NiCrMoS6-4 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 17NiCrMo6-4 is a high-performance nickel-chromium-molybdenum alloy carburizing steel grade developed for components requiring a very hard, wear-resistant surface combined with an exceptionally tough and high-strength core after carburizing and heat treatment. With approximately 0.17% carbon and higher alloy content, this grade offers superior hardenability, deep case hardening capability, and outstanding fatigue strength under heavy dynamic loads. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 17NiCrMo6-4 steel is widely used in automotive, heavy-duty gear manufacturing, and critical engineering applications. Nickel enhances core toughness and impact resistance, chromium improves wear resistance and case depth, while molybdenum increases hardenability and resistance to tempering, ensuring reliable performance under severe service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 17NiCrMo6-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (17NiCrMo6-4): • 17 – Approx. 0.17% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • 6-4 – Alloy content classification (nickel/chromium and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.40 – 1.70 • Chromium (Cr): 1.50 – 1.80 • Molybdenum (Mo): 0.25 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 950 – 1150 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 8% • Hardness (Core): 280 – 340 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent deep case hardening capability • Superior hardenability due to higher alloy content • Outstanding core toughness and fatigue strength • Improved resistance to tempering and thermal softening • Suitable for heavily loaded and shock-resistant components Material Characteristics: EN 10084 17NiCrMo6-4 round bars provide an optimal balance of deep surface hardness and strong, ductile core properties. The combined addition of nickel, chromium, and molybdenum ensures enhanced wear resistance, consistent case depth, and reliable performance in high-stress mechanical applications. Applications: • Heavy-duty gears and gear shafts • Automotive transmission components • Industrial gearbox and drive systems • Pinions and differential shafts • High-load machine components • Case hardened parts subjected to cyclic and shock loading Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 17NiCrMo6-4 round bars in various diameters and finishes. With excellent hardenability, deep carburizing capability, and superior mechanical strength, 17NiCrMo6-4 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20NiCrMoS2-2 is a nickel-chromium-molybdenum alloy carburizing steel with controlled sulphur content, developed for components requiring a very hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon along with nickel, chromium, and molybdenum additions, this grade provides excellent hardenability, improved fatigue strength, and enhanced machinability due to sulphur addition. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMoS2-2 steel is widely used in automotive, gearbox manufacturing, and heavy engineering industries. Nickel improves core toughness, chromium enhances wear resistance and depth of hardening, molybdenum increases hardenability and tempering resistance, while sulphur ensures better machinability before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMoS2-2 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20NiCrMoS2-2): • 20 – Approx. 0.20% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • S – Increased sulphur content for improved machinability • 2-2 – Alloy content classification (nickel/chromium and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.40 – 0.70 • Chromium (Cr): 0.40 – 0.70 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9% • Hardness (Core): 250 – 320 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing and deep case hardening capability • Improved machinability due to sulphur addition • Enhanced hardenability from molybdenum content • Good core toughness and fatigue resistance • Suitable for heavily loaded and precision-machined components Material Characteristics: EN 10084 20NiCrMoS2-2 round bars combine strong hardenability with improved machining performance. The addition of molybdenum enhances resistance to tempering and softening, while sulphur ensures efficient machining prior to carburizing, making this grade ideal for precision components requiring high strength and wear resistance. Applications: • Heavy-duty gears and gear shafts • Automotive transmission components • Differential and pinion shafts • Industrial gearbox parts • High-load drivetrain components • Case hardened components subjected to cyclic and shock loads Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMoS2-2 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance after heat treatment, 20NiCrMoS2-2 steel is widely used in demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation.

EN 10084 20NiCrMo2-2 is a nickel-chromium-molybdenum alloy carburizing steel grade designed for components requiring a very hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon along with nickel, chromium, and molybdenum additions, this grade offers excellent hardenability, improved fatigue strength, and enhanced resistance to impact and dynamic loading. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20NiCrMo2-2 steel is widely used in automotive, gearbox, and heavy engineering industries. Nickel improves core toughness, chromium enhances wear resistance and depth of hardening, while molybdenum increases hardenability and resistance to tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20NiCrMo2-2 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20NiCrMo2-2): • 20 – Approx. 0.20% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • 2-2 – Alloy content classification (nickel/chromium and molybdenum levels) Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.40 – 0.70 • Chromium (Cr): 0.40 – 0.70 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9% • Hardness (Core): 250 – 320 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing and deep case hardening capability • Improved hardenability due to molybdenum addition • Good core toughness and fatigue strength • Enhanced resistance to tempering and softening • Suitable for heavily loaded and high-stress components Material Characteristics: EN 10084 20NiCrMo2-2 round bars provide a balanced combination of surface hardness and core strength. The addition of molybdenum enhances hardenability and resistance to thermal softening, making this grade suitable for demanding engineering applications requiring reliable long-term performance. Applications: • Heavy-duty gears and gear shafts • Transmission and differential components • Automotive drivetrain parts • Industrial gearbox components • High-load shafts and pinions • Case hardened components subjected to cyclic stresses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20NiCrMo2-2 round bars in various diameters and finishes. With strong hardenability, reliable fatigue performance, and excellent mechanical properties after heat treatment, 20NiCrMo2-2 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 15NiCr13 is a nickel-chromium alloy carburizing steel grade developed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.15% carbon and higher nickel content, this grade offers excellent hardenability, superior core toughness, and high fatigue strength, making it suitable for heavily loaded and shock-resistant mechanical parts. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 15NiCr13 steel is widely used in automotive, gearbox manufacturing, and heavy engineering industries. Nickel significantly enhances toughness and resistance to impact, while chromium improves wear resistance and depth of hardening, ensuring reliable performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 15NiCr13 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (15NiCr13): • 15 – Approx. 0.15% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • 13 – Alloy content classification (higher nickel and chromium levels) Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 3.00 – 3.50 • Chromium (Cr): 0.80 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 950 – 1150 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 8% • Hardness (Core): 280 – 340 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent deep case hardening capability • Very high core toughness due to elevated nickel content • Good hardenability and wear resistance • High fatigue strength under cyclic loading • Suitable for critical and heavy-duty case hardened components Material Characteristics: EN 10084 15NiCr13 round bars provide a strong combination of deep carburizing response and exceptional core strength. The higher nickel content significantly improves ductility and resistance to shock loading, while chromium ensures uniform case hardness and enhanced wear resistance. Applications: • Heavy-duty gears and gear shafts • Aerospace and high-performance transmission components • Differential and pinion shafts • Industrial gearbox parts • High-load automotive drivetrain components • Engineering parts subjected to severe dynamic stresses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 15NiCr13 round bars in various diameters and finishes. With superior hardenability, excellent fatigue resistance, and outstanding core toughness, 15NiCr13 steel is widely preferred for demanding automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 18NiCr5-4 is a nickel-chromium alloy carburizing steel grade developed for components requiring a hard, wear-resistant surface with a strong and tough core after carburizing and heat treatment. With approximately 0.18% carbon along with nickel and chromium additions, this grade offers excellent hardenability, improved fatigue strength, and superior impact resistance, making it suitable for highly stressed mechanical components. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18NiCr5-4 steel is widely used in automotive, heavy engineering, and transmission industries. Nickel enhances core toughness and resistance to shock loading, while chromium improves wear resistance and depth of hardening, ensuring reliable mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18NiCr5-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18NiCr5-4): • 18 – Approx. 0.18% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • 5-4 – Alloy content classification (nickel and chromium levels) Chemical Composition (% – typical limits): • Carbon (C): 0.16 – 0.21 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.00 – 1.40 • Chromium (Cr): 0.80 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 9% • Hardness (Core): 230 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior core toughness due to nickel content • Good hardenability and wear resistance • High fatigue strength under dynamic loads • Suitable for heavy-duty case hardened components Material Characteristics: EN 10084 18NiCr5-4 round bars combine deep case hardening capability with enhanced core strength and ductility. The higher nickel content improves impact resistance, while chromium ensures uniform hardness distribution and wear resistance after carburizing and quenching. Applications: • Heavy-duty gears and gear shafts • Transmission and differential components • Drive shafts and pinions • Automotive drivetrain parts • Industrial machinery components requiring case hardening • Components subjected to high cyclic stresses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18NiCr5-4 round bars in various diameters and finishes. With reliable hardenability, excellent fatigue resistance, and strong core toughness, 18NiCr5-4 steel is widely used in demanding automotive and engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 16NiCrS4 is a nickel-chromium alloy carburizing steel with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a tough and impact-resistant core after carburizing and heat treatment. With approximately 0.16% carbon along with nickel and chromium additions, this grade offers excellent hardenability and core strength, while the sulphur addition improves machinability compared to 16NiCr4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16NiCrS4 steel is widely used in automotive, heavy engineering, and transmission industries. The nickel improves toughness and fatigue resistance, chromium enhances depth of hardening and wear resistance, and the sulphur addition ensures efficient machining prior to heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16NiCrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (16NiCrS4): • 16 – Approx. 0.16% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.90 – 1.20 • Chromium (Cr): 0.60 – 0.90 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 500 MPa • Elongation: ≥ 10% • Hardness (Core): 200 – 260 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Good hardenability from chromium content • High core toughness due to nickel addition • Enhanced fatigue and impact resistance Material Characteristics: EN 10084 16NiCrS4 round bars combine strong hardenability with enhanced machining performance. The nickel addition improves ductility and resistance to shock loading, chromium supports uniform case depth, and sulphur allows efficient machining before carburizing and heat treatment. Applications: • Gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 16NiCrS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance, 16NiCrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCrS4 is a low alloy molybdenum-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MoCr4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCrS4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, molybdenum enhances strength and tempering resistance, and the sulphur addition ensures efficient machining prior to heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCrS4): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.20 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 8% • Hardness (Core): 240 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Superior hardenability from higher Cr and Mo content • High core strength with good toughness • Enhanced resistance to wear and temper softening Material Characteristics: EN 10084 20MoCrS4 round bars combine strong hardenability with enhanced machining performance. The increased chromium and molybdenum content enables deeper and more uniform case hardening, while sulphur supports efficient machining before carburizing and heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCrS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance, 20MoCrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCr4 is a low alloy molybdenum-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue compared to lower alloy carburizing steels. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCr4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength, tempering resistance, and overall mechanical stability after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCr4): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.20 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9% • Hardness (Core): 240 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to higher Cr and Mo content • High core strength with good toughness • Improved resistance to wear, fatigue, and temper softening • Suitable for heavily loaded components Material Characteristics: EN 10084 20MoCr4 round bars provide enhanced hardenability and strength compared to lower alloy grades. The increased chromium and molybdenum content allows deeper and more uniform case hardening, making the material suitable for high-stress and heavy-duty mechanical applications. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCr4 round bars in various diameters and finishes. With improved hardenability, strong core properties, and reliable performance after heat treatment, 20MoCr4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCrS3 is a low alloy molybdenum-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MoCr3. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCrS3 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, molybdenum enhances strength and tempering resistance, and the sulphur addition ensures efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCrS3 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCrS3): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 3 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 8% • Hardness (Core): 220 – 280 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Superior hardenability from Mo and Cr additions • High core strength with good toughness • Enhanced resistance to wear and fatigue Material Characteristics: EN 10084 20MoCrS3 round bars combine strong hardenability with enhanced machining performance. The molybdenum improves tempering resistance and strength retention, while chromium enhances wear resistance and case depth. The sulphur addition supports efficient machining prior to heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCrS3 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical properties, 20MoCrS3 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 22CrMoS3-5 is a low alloy chromium-molybdenum carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface along with a strong and tough core after carburizing and heat treatment. With approximately 0.22% carbon and alloying elements such as chromium and molybdenum, this grade provides enhanced hardenability, improved core strength, and excellent fatigue resistance. The added sulphur improves machinability compared to non-sulphurized grades. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 22CrMoS3-5 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, molybdenum enhances tempering resistance and strength, and the sulphur content ensures efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 22CrMoS3-5 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (22CrMoS3-5): • 22 – Approx. 0.22% carbon content • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • S – Increased sulphur content for improved machinability • 3-5 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.19 – 0.25 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 8% • Hardness (Core): 240 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • High hardenability due to Cr and Mo additions • Improved machinability from controlled sulphur content • High core strength and fatigue resistance • Good tempering resistance Material Characteristics: EN 10084 22CrMoS3-5 round bars provide a combination of deep case hardening capability and strong core properties. The chromium and molybdenum improve wear resistance and strength retention, while sulphur ensures better machining efficiency before heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 22CrMoS3-5 round bars in various diameters and finishes. With enhanced hardenability, strong core strength, and improved machinability, 22CrMoS3-5 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 18CrMoS4 is a low alloy chromium-molybdenum carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a tough, high-strength core after carburizing and heat treatment. With approximately 0.18% carbon along with chromium and molybdenum additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 18CrMo4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrMoS4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium enhances depth of hardening and wear resistance, molybdenum improves strength and tempering resistance, and the sulphur addition supports efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrMoS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18CrMoS4): • 18 – Approx. 0.18% carbon content • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • S – Increased sulphur content for improved machinability • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.15 – 0.21 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 8% • Hardness (Core): 230 – 290 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to Cr and Mo additions • Improved machinability from controlled sulphur content • High core strength with good toughness • Enhanced resistance to wear and fatigue Material Characteristics: EN 10084 18CrMoS4 round bars combine strong hardenability and enhanced machining performance. The molybdenum addition improves strength retention and resistance to temper softening, while sulphur ensures better machinability prior to carburizing and heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18CrMoS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong core properties, 18CrMoS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 16MnCr5 is a low alloy manganese-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.16% carbon along with manganese and chromium additions, this grade offers excellent hardenability and improved core strength compared to plain carbon carburizing steels. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16MnCr5 steel is widely used in automotive, transmission, and general engineering industries. The balanced alloy composition ensures uniform case hardening, reliable core toughness, and consistent mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16MnCr5 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (16MnCr5): • 16 – Approx. 0.16% carbon content • Mn – Manganese alloyed steel • Cr – Chromium alloyed steel • 5 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 1.00 – 1.30 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.80 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: ≥ 10% • Hardness (Core): 190 – 240 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Good hardenability due to Mn and Cr content • High core strength with good toughness • Uniform case depth and hardness distribution • Suitable for dynamically loaded components Material Characteristics: EN 10084 16MnCr5 round bars provide a strong combination of surface hardness and core toughness. The manganese improves hardenability and strength, while chromium enhances wear resistance and case depth, making the grade ideal for heavily stressed mechanical components. Applications: • Gears and gear shafts • Transmission components • Camshafts • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 16MnCr5 round bars in various diameters and finishes. With excellent hardenability and reliable performance after heat treatment, 16MnCr5 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 28CrS4 is a low alloy chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a strong, tough core after carburizing and heat treatment. With approximately 0.28% carbon and chromium addition, this grade offers higher core strength and improved hardenability, while the increased sulphur content enhances machinability compared to 28Cr4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 28CrS4 steel is widely used in automotive, heavy engineering, and general mechanical industries. The balanced chemical composition ensures efficient machining in the annealed condition and consistent hardening characteristics after carburizing and quenching. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 28CrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (28CrS4): • 28 – Approx. 0.28% carbon content • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 4 – Chromium content range classification Chemical Composition (% – typical limits): • Carbon (C): 0.25 – 0.30 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.70 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: ≥ 10% • Hardness (Core): 190 – 240 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Higher core strength compared to lower carbon grades • Good hardenability from chromium addition • Reliable wear resistance after case hardening Material Characteristics: EN 10084 28CrS4 round bars combine enhanced strength and machinability with strong carburizing performance. The chromium addition supports deeper case hardening, while the sulphur content ensures efficient machining prior to heat treatment. Applications: • Gears and gear shafts • Axles and spindles • Transmission components • Heavy-duty pins and bushings • Mechanical couplings • Industrial machinery components requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 28CrS4 round bars in various diameters and finishes. With improved strength, machinability, and hardenability, 28CrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 28Cr4 is a low alloy chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface with a strong and tough core after carburizing and heat treatment. With approximately 0.28% carbon and chromium addition, this grade offers higher core strength and improved hardenability compared to lower carbon carburizing steels such as 17Cr3. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 28Cr4 steel is widely used in automotive, heavy machinery, and general engineering industries. The chromium content enhances depth of hardening and wear resistance, ensuring consistent mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 28Cr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (28Cr4): • 28 – Approx. 0.28% carbon content • Cr – Chromium alloyed steel • 4 – Chromium content range classification Chemical Composition (% – typical limits): • Carbon (C): 0.25 – 0.30 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.70 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: ≥ 11% • Hardness (Core): 190 – 240 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing characteristics • Higher core strength due to increased carbon content • Improved hardenability from chromium addition • Good wear resistance after case hardening • Suitable for dynamically loaded components Material Characteristics: EN 10084 28Cr4 round bars provide enhanced strength and hardenability compared to lower carbon grades. The chromium content supports deeper case hardening and uniform hardness distribution, making the material suitable for medium to heavily stressed components. Applications: • Gears and gear shafts • Axles and spindles • Transmission components • Heavy-duty pins and bushings • Mechanical couplings • Industrial machinery parts requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 28Cr4 round bars in various diameters and finishes. With improved strength and hardenability, 28Cr4 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 17Cr3 is a low alloy chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and shock-resistant core after carburizing and heat treatment. With approximately 0.17% carbon and added chromium content, this grade offers improved hardenability and enhanced wear resistance compared to plain carbon carburizing steels. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 17Cr3 steel is widely used in automotive, mechanical, and general engineering industries. The controlled chromium addition improves depth of hardening and core strength, ensuring consistent mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 17Cr3 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (17Cr3): • 17 – Approx. 0.17% carbon content • Cr – Chromium alloyed steel • 3 – Approx. 0.70 – 1.00% chromium content range classification Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.70 – 1.00 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 540 – 780 MPa • Yield Strength: ≥ 350 MPa • Elongation: ≥ 11% • Hardness (Core): 160 – 220 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved hardenability due to chromium content • Higher wear resistance compared to plain carbon grades • Good toughness and shock resistance • Reliable performance after quenching and tempering Material Characteristics: EN 10084 17Cr3 round bars provide a combination of high surface hardness and strong core properties, making them suitable for dynamically loaded components. The chromium addition enhances case depth and uniform hardness distribution. Applications: • Gears and pinions • Camshafts • Shafts and axles • Bushings and sleeves • Automotive transmission components • General engineering components requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 17Cr3 round bars in various diameters and finishes. With enhanced hardenability and wear resistance, 17Cr3 steel is widely used in automotive and heavy engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 C16R is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.16%, this grade provides reliable core strength while maintaining excellent response to carburizing processes. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C16R steel is widely used in automotive, mechanical, and general engineering industries. The controlled chemical composition ensures good machinability and consistent hardening characteristics, resulting in high surface hardness and dependable core toughness after treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C16R round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C16R): • C – Carbon steel • 16 – Approx. 0.16% carbon content • R – Special quality steel with specified sulphur range for improved machinability Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 380 – 520 MPa • Yield Strength: ≥ 250 MPa • Elongation: ≥ 24% • Hardness (Core): 120 – 180 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Reliable core strength • Good weldability before heat treatment • Tough and ductile core after treatment Material Characteristics: EN 10084 C16R round bars are suitable for components requiring consistent machining performance along with a hardened, wear-resistant surface. The material provides uniform carburizing characteristics and stable mechanical performance after quenching and tempering. Applications: • Gears and pinions • Shafts and spindles • Pins and bushings • Automotive transmission parts • Couplings and mechanical components • General engineering parts requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C16R round bars in various diameters and finishes. With reliable carburizing properties and enhanced machinability, C16R steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 C16E is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.16%, this grade provides slightly higher core strength compared to C15 grades while maintaining excellent response to carburizing processes. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C16E steel is widely used in automotive, mechanical, and general engineering industries. The controlled chemical composition ensures good machinability and consistent hardening characteristics, resulting in high surface hardness and reliable core toughness after treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C16E round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C16E): • C – Carbon steel • 16 – Approx. 0.16% carbon content • E – Special quality steel with controlled sulphur and phosphorus (low impurity level) Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 380 – 520 MPa • Yield Strength: ≥ 250 MPa • Elongation: ≥ 24% • Hardness (Core): 120 – 180 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions. Key Features: • Excellent carburizing response • Improved core strength compared to C15 grades • Good machinability in annealed condition • Good weldability before heat treatment • Tough and ductile core after treatment Material Characteristics: EN 10084 C16E round bars are suitable for components requiring higher core strength along with a hardened, wear-resistant surface. The material provides uniform carburizing characteristics and consistent mechanical performance after quenching and tempering. Applications: • Gears and pinions • Shafts and spindles • Pins and bushings • Automotive transmission parts • Couplings and mechanical components • General engineering parts requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C16E round bars in various diameters and finishes. With reliable carburizing properties and enhanced core strength, C16E steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 C15R is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.15%, this grade offers improved core strength compared to C10 grades while maintaining excellent carburizing characteristics. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C15R steel is widely used in automotive and mechanical engineering industries. The controlled composition ensures good machinability and consistent response to surface hardening processes, resulting in high surface hardness and good wear resistance after treatment. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10084 C15R round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C15R): • C – Carbon steel • 15 – Approx. 0.15% carbon content • R – Special quality suitable for carburizing applications Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 370 – 500 MPa • Yield Strength: ≥ 240 MPa • Elongation: ≥ 25% • Hardness (Core): 110 – 170 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions. Key Features: • Excellent carburizing response • Improved core strength compared to lower carbon grades • Good machinability • Good formability • Tough and ductile core after heat treatment Material Characteristics: EN 10084 C15R round bars are suitable for components requiring a hardened wear-resistant surface with a strong core. The material provides consistent carburizing performance and reliable mechanical properties after quenching and tempering. Applications: • Gears and gear blanks • Shafts and spindles • Pins and bushings • Automotive transmission parts • Couplings and mechanical components • General engineering parts requiring hardened surfaces Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C15R round bars in various diameters and finishes. With reliable carburizing capability and enhanced core strength, C15R steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 C15E is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.15%, this grade provides slightly higher core strength compared to C10 grades while maintaining excellent case hardening capability. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C15E steel is widely used in automotive, mechanical, and general engineering industries. The controlled chemical composition ensures good machinability and consistent response to carburizing, resulting in improved surface hardness and wear resistance after heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C15E round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C15E): • C – Carbon steel • 15 – Approx. 0.15% carbon content • E – Special quality steel with controlled sulphur and phosphorus (low impurity level) Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 370 – 500 MPa • Yield Strength: ≥ 240 MPa • Elongation: ≥ 25% • Hardness (Core): 110 – 170 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions. Key Features: • Excellent response to carburizing • Slightly higher core strength than C10 grades • Good machinability • Good weldability before heat treatment • Tough and ductile core after treatment Material Characteristics: EN 10084 C15E round bars are suitable for components requiring improved core strength along with high surface hardness. The material offers uniform carburizing characteristics and consistent mechanical performance after quenching and tempering. Applications: • Gears and gear blanks • Shafts and spindles • Pins and bushings • Automotive transmission parts • Couplings and mechanical components • General engineering parts requiring hardened surfaces Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C15E round bars in various diameters and finishes. With reliable carburizing properties and enhanced core strength, C15E steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 C10R is a low carbon steel grade designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. With a nominal carbon content of approximately 0.10%, this grade is suitable for applications where surface hardness is developed through case hardening while maintaining good core strength and impact resistance. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, C10R steel is widely used in automotive and mechanical engineering industries. The low carbon content ensures good formability and machinability before heat treatment, while carbon enrichment during carburizing significantly improves surface wear resistance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 C10R round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C10R): • C – Carbon steel • 10 – Approx. 0.10% carbon content • R – Special quality with controlled composition suitable for carburizing Chemical Composition (% – typical limits): • Carbon (C): 0.07 – 0.13 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 340 – 470 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 27% • Hardness (Core): 100 – 160 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on heat treatment conditions. Key Features: • Excellent carburizing response • Good machinability in annealed condition • Good formability • Tough and ductile core after heat treatment • Suitable for wear-resistant surface applications Material Characteristics: EN 10084 C10R round bars are used where high surface hardness and wear resistance are required along with a shock-resistant core. The material offers consistent carburizing behavior and reliable mechanical performance after heat treatment. Applications: • Gears and pinions • Bushings and sleeves • Shafts and spindles • Cam components • Automotive transmission parts • Small mechanical components requiring hardened surfaces Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C10R round bars in various diameters and finishes. With reliable carburizing capability and good core toughness, C10R steel is widely used in automotive and general engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 C10E is a low carbon case hardening steel grade designed for components that require a hard, wear-resistant surface with a tough and ductile core. With a nominal carbon content of approximately 0.10%, this grade is ideal for carburizing applications where surface hardness is developed through heat treatment while maintaining core strength. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for case hardening steels, C10E steel is widely used in automotive and mechanical engineering industries. The low carbon content ensures good formability and weldability before carburizing, while surface carbon enrichment during heat treatment significantly improves wear resistance. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10084 C10E round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C10E): • C – Carbon steel • 10 – Approx. 0.10% carbon content • E – Special quality steel with controlled sulphur and phosphorus (low impurity level) Chemical Composition (% – typical limits): • Carbon (C): 0.07 – 0.13 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 340 – 470 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 27% • Hardness (Core): 100 – 160 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on treatment conditions. Key Features: • Excellent case hardening response • Good machinability in annealed condition • Good weldability before carburizing • Tough and ductile core after heat treatment • Suitable for surface wear-resistant applications Material Characteristics: EN 10084 C10E round bars are primarily used where surface hardness and wear resistance are critical while maintaining a shock-resistant core. The material offers uniform carburizing characteristics and consistent mechanical performance after heat treatment. Applications: • Gears and pinions • Bushings and sleeves • Shafts and spindles • Cam components • Automotive transmission parts • Small mechanical components requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C10E round bars in various diameters and finishes. With excellent carburizing capability and reliable core toughness, C10E steel is widely used in automotive and general engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10083-3 50CrMo4 is a high carbon chromium-molybdenum alloy steel grade designed for applications requiring very high strength, excellent wear resistance, and superior hardenability after quenching and tempering. With a nominal carbon content of approximately 0.50%, this grade delivers higher hardness and strength compared to 42CrMo4, making it suitable for heavily stressed and wear-resistant components. Manufactured according to EN 10083-3 technical delivery conditions, 50CrMo4 steel provides deep hardening capability even in larger cross-sections. Chromium enhances hardenability and wear resistance, while molybdenum improves strength and resistance to tempering softening. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 50CrMo4 alloy steel bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars Explanation of Designation (50CrMo4): • 50 – Approx. 0.50% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.47 – 0.55 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1300 MPa • Yield Strength: ≥ 850 MPa • Elongation: ≥ 9% • Hardness: 280 – 360 HB (depending on section size and heat treatment) Key Features: • Very high strength and hardness • Excellent wear resistance • Deep hardening capability • Good fatigue resistance • Suitable for high-stress mechanical applications Material Characteristics: EN 10083-3 50CrMo4 alloy steel bar offers superior strength and surface hardness after heat treatment. The chromium-molybdenum alloying ensures uniform mechanical properties and reliable performance in heavy-duty conditions. It is particularly suitable for components exposed to high loads and abrasion. Applications: • Heavy-duty shafts and spindles • Gears and pinions • Axles and drive components • High-strength bolts and fasteners • Mining and construction equipment parts • Industrial machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 50CrMo4 alloy steel bars in a wide range of diameters and finishes. Known for high strength, hardness, and wear resistance, 50CrMo4 steel bars are ideal for demanding automotive, industrial, and heavy engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade developed for components requiring high strength, good hardenability, and improved machinability. With a nominal carbon content of approximately 0.34%, this grade offers a strong balance between strength and toughness, while the addition of sulphur (S) enhances machining performance compared to non-resulphurized grades such as 34CrMo4. Manufactured in accordance with EN 10083-3, 34CrMoS4 steel is suitable for quenching and tempering applications where both mechanical strength and efficient machining are required. Chromium improves hardenability and wear resistance, while molybdenum increases strength and resistance to tempering softening. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrMoS4 alloy steel bars, supplied with mill test certificates and strict quality assurance. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars Explanation of Designation (34CrMoS4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10 – 12% • Hardness: 260 – 320 HB (depending on section size and heat treatment) Key Features: • High strength Cr-Mo alloy steel • Improved machinability due to sulphur addition • Excellent hardenability for thick sections • Good fatigue and impact resistance • Suitable for heavily machined components Material Characteristics: EN 10083-3 34CrMoS4 alloy steel bar combines the strength and hardenability of chromium-molybdenum steel with enhanced machining performance. It provides uniform mechanical properties after quenching and tempering, making it ideal for precision-machined heavy-duty components. Applications: • Machined shafts and spindles • Automotive drivetrain components • Gear shafts • High-strength bolts and studs • Oil and gas mechanical parts • Heavy engineering machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrMoS4 alloy steel bars in a wide range of diameters and finishes. With high strength, reliable hardenability, and improved machinability, 34CrMoS4 is an excellent choice for demanding engineering and industrial applications. For stock availability, custom sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 42CrMo4 is a high-strength chromium-molybdenum alloy steel grade widely used for components requiring excellent tensile strength, superior toughness, and outstanding hardenability after quenching and tempering. With a nominal carbon content of approximately 0.42%, this grade offers higher strength levels compared to 34CrMo4, making it suitable for heavily loaded and dynamically stressed parts. Manufactured in accordance with EN 10083-3, 42CrMo4 steel provides deep hardening capability and consistent mechanical properties across larger cross-sections. The combination of chromium and molybdenum enhances wear resistance, fatigue strength, and resistance to tempering softening. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 42CrMo4 alloy steel bars, supplied with mill test certificates and strict quality assurance as per international standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Ground bars, Square bars, Flat bars, Hex bars Explanation of Designation (42CrMo4): • 42 – Approx. 0.42% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1200 MPa • Yield Strength: ≥ 850 MPa • Elongation: ≥ 10% • Hardness: 280 – 340 HB (depending on section size and heat treatment) Key Features: • High tensile and yield strength • Excellent hardenability for thick sections • Good fatigue and impact resistance • Reliable performance under dynamic loading • Suitable for heavy-duty engineering components Material Characteristics: EN 10083-3 42CrMo4 alloy steel bar offers exceptional strength and toughness after heat treatment. The chromium-molybdenum alloying ensures deep hardening capability and consistent mechanical properties throughout the cross-section. It performs well under cyclic stress and heavy mechanical loads. Applications: • Heavy-duty shafts and axles • Gears and gear shafts • Crankshafts and connecting rods • High-strength bolts and studs • Oil and gas equipment components • Construction and mining machinery parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 42CrMo4 alloy steel bars in a wide range of diameters and finishes. Known for superior strength, hardenability, and fatigue resistance, 42CrMo4 steel bars are ideal for demanding automotive, mechanical, and heavy engineering applications. For stock details, custom sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrMo4 is a chromium-molybdenum alloy steel grade designed for components requiring high strength, good toughness, and excellent hardenability after quenching and tempering. With a nominal carbon content of approximately 0.34%, this grade provides higher strength levels compared to 25CrMo4 while maintaining reliable impact resistance and fatigue performance. Manufactured in accordance with EN 10083-3, 34CrMo4 steel is widely used in engineering and heavy-duty mechanical applications. The presence of chromium improves hardenability and wear resistance, while molybdenum enhances strength and resistance to tempering softening, especially in thicker sections. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrMo4 alloy steel plates and bars, supplied with mill test certificates and strict quality inspection. Forms of Supply (as per grade): Hot rolled plates, Quenched and tempered plates, Normalized plates, Annealed plates, Flame cut plates, Cut-to-size plates, Hot rolled round bars, Black round bars, Forged bars, Bright bars, Peeled bars, Turned bars, Square bars, Flat bars, Hex bars Explanation of Designation (34CrMo4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved hardenability and wear resistance • Mo – Molybdenum for enhanced strength and resistance to tempering softening • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 11% • Hardness: 260 – 320 HB (depending on section size and heat treatment) Key Features: • High strength Cr-Mo alloy steel • Excellent hardenability for thick sections • Good impact strength and fatigue resistance • Reliable performance after quenching and tempering • Suitable for both plate fabrication and machined bar components Material Characteristics: EN 10083-3 34CrMo4 alloy steel offers a strong combination of mechanical strength and toughness. The chromium and molybdenum content ensures deep and uniform hardening, making it suitable for heavily stressed components in both plate and bar forms. It performs well under cyclic loading and dynamic stresses. Applications: • Pressure vessel and high-strength structural plates • Shafts and spindles • Automotive drivetrain components • Oil and gas equipment parts • Heavy machinery components • Bolts and high-strength fasteners Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrMo4 alloy steel plates and bars in a wide range of sizes and heat-treated conditions. With superior strength, toughness, and hardenability, 34CrMo4 is widely used in demanding engineering and industrial applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 25CrMoS4 is a resulphurized chromium-molybdenum alloy steel grade designed for applications requiring good strength, reliable hardenability, and enhanced machinability. Due to the addition of sulphur (S), this grade offers improved machining performance, making it highly suitable for components that require extensive machining after processing in both plate and bar forms. With a nominal carbon content of approximately 0.25% and alloying elements such as chromium and molybdenum, 25CrMoS4 provides a balanced combination of strength, toughness, and wear resistance after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of EN 10083-3 25CrMoS4 alloy steel plates and bars, supplied with mill test certificates and strict quality assurance as per international standards. Forms of Supply (as per grade): Hot rolled plates Quenched and tempered plates Normalized plates Annealed plates Flame cut plates Cut-to-size plates Hot rolled round bars Black round bars Forged bars Bright bars Peeled bars Square bars Flat bars Hex bars Explanation of Designation (25CrMoS4): • 25 – Approx. 0.25% carbon content • Cr – Chromium for improved strength and hardenability • Mo – Molybdenum for enhanced hardenability and resistance to tempering softening • S – Resulphurized for improved machinability • 4 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.22 – 0.29 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: ≥ 12% • Hardness: 200 – 280 HB (depending on section size and heat treatment) Key Features: • Resulphurized Cr-Mo alloy steel with superior machinability • Good strength and toughness after heat treatment • Improved hardenability compared to carbon steels • Reliable fatigue resistance • Suitable for both plate fabrication and machined bar components Material Characteristics: EN 10083-3 25CrMoS4 alloy steel offers a strong combination of mechanical performance and machining efficiency. The chromium and molybdenum content enhances hardenability and strength, while sulphur addition improves chip formation during machining operations. It performs well in quenched and tempered conditions for structural and mechanical applications. Applications: • Machined shafts and transmission components • Structural and fabricated engineering parts • Automotive components • Industrial machinery parts • Heat-treated mechanical plates and bars Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 25CrMoS4 alloy steel plates and bars in a wide range of sizes and heat-treated conditions. With enhanced machinability, good strength, and dependable performance, 25CrMoS4 is an excellent choice for demanding engineering and industrial applications. For stock availability, custom sizes, or technical assistance, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 39MnCrB6-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high strength, superior hardenability, and excellent wear resistance after quenching and tempering. The addition of boron (B) in controlled amounts significantly increases hardenability, allowing deep and uniform hardening even in large diameter bars. With a nominal carbon content of approximately 0.39%, along with manganese and chromium as key alloying elements, 39MnCrB6-2 steel provides enhanced tensile strength and improved fatigue performance compared to lower carbon boron steels. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 39MnCrB6-2 alloy steel bars, supplied with certified mill test certificates and strict quality assurance. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (39MnCrB6-2): • 39 – Approx. 0.39% carbon content • Mn – Manganese for strength and improved hardenability • Cr – Chromium for enhanced wear resistance and depth of hardening • B – Boron for significantly increased hardenability • 6-2 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.42 • Manganese (Mn): 1.20 – 1.50 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.30 – 0.60 • Boron (B): 0.0008 – 0.0050 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 950 – 1150 MPa • Yield Strength: ≥ 750 MPa • Elongation: ≥ 9 – 11% • Hardness: 280 – 340 HB (depending on heat treatment and section size) Key Features: • High carbon boron-alloyed steel with superior hardenability • High strength and improved fatigue resistance • Uniform mechanical properties in thick sections • Good wear resistance after heat treatment • Suitable for heavily loaded mechanical components Material Characteristics: EN 10083-3 39MnCrB6-2 alloy steel bar offers enhanced hardenability due to boron addition, ensuring deep hardening capability and consistent strength throughout the cross section. The higher carbon content provides increased hardness and tensile strength, making it suitable for demanding engineering applications. Applications: • Heavy-duty shafts and axles • Automotive drivetrain and suspension components • Gears and transmission parts • Agricultural and construction machinery components • High-strength bolts and mechanical fasteners Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 39MnCrB6-2 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With high strength, superior hardenability, and reliable performance after heat treatment, 39MnCrB6-2 steel bars are an ideal choice for automotive and heavy engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 33MnCrB5-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high strength, excellent hardenability, and reliable toughness after quenching and tempering. The controlled addition of boron (B) significantly improves hardenability, enabling deep and uniform hardening even in medium to large cross-section bars. With a nominal carbon content of approximately 0.33%, along with manganese and chromium as the primary alloying elements, 33MnCrB5-2 steel offers a strong combination of strength, wear resistance, and fatigue performance. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 33MnCrB5-2 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (33MnCrB5-2): • 33 – Approx. 0.33% carbon content • Mn – Manganese for improved strength and hardenability • Cr – Chromium for enhanced wear resistance and deeper hardening • B – Boron for significantly increased hardenability • 5-2 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.36 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.30 – 0.60 • Boron (B): 0.0008 – 0.0050 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10 – 12% • Hardness: 260 – 330 HB (depending on heat treatment and section size) Key Features: • Boron-alloyed steel with superior hardenability • Higher strength due to increased carbon content • Uniform mechanical properties across larger sections • Good fatigue and wear resistance • Suitable for demanding heat-treated applications Material Characteristics: EN 10083-3 33MnCrB5-2 alloy steel bar provides enhanced hardenability through boron addition, ensuring deep hardening capability and consistent mechanical properties. It combines high strength with adequate toughness, making it suitable for dynamically loaded components. Applications: • Automotive suspension and drivetrain components • Shafts and axles • Gears and transmission parts • High-strength fasteners and bolts • Agricultural and heavy-duty machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 33MnCrB5-2 alloy steel bars in various sizes and finishes to meet industrial and automotive requirements. With high strength, enhanced hardenability, and reliable performance after heat treatment, 33MnCrB5-2 steel bars are an excellent choice for engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 27MnCrB5-2 is a boron-alloyed manganese-chromium steel grade developed for applications requiring high hardenability, good strength, and excellent performance after quenching and tempering. The addition of boron (B), even in very small quantities, significantly enhances hardenability, allowing uniform mechanical properties in medium to large cross-section bars. With a nominal carbon content of approximately 0.27%, along with manganese and chromium as primary alloying elements, 27MnCrB5-2 steel provides a good balance of strength, toughness, and wear resistance. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 27MnCrB5-2 alloy steel bars, supplied with certified mill test certificates and strict quality assurance. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (27MnCrB5-2): • 27 – Approx. 0.27% carbon content • Mn – Manganese for strength and improved hardenability • Cr – Chromium for wear resistance and deeper hardening • B – Boron for significantly enhanced hardenability • 5-2 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.24 – 0.30 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.30 – 0.60 • Boron (B): 0.0008 – 0.0050 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 12% • Hardness: 250 – 320 HB (depending on heat treatment and section size) Key Features: • Boron-alloyed steel with enhanced hardenability • Good strength-to-toughness ratio • Uniform mechanical properties in thicker sections • Suitable for heat treatment applications • Cost-effective alternative to higher alloy steels Material Characteristics: EN 10083-3 27MnCrB5-2 alloy steel bar offers improved hardenability due to boron addition, allowing deep and uniform hardening even in larger diameters. It provides a reliable combination of strength, toughness, and wear resistance after quenching and tempering, making it suitable for structural and mechanical components. Applications: • Automotive suspension and transmission components • Shafts and axles • Gears and drive components • High-strength bolts and fasteners • Agricultural and heavy machinery parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 27MnCrB5-2 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With enhanced hardenability, good strength, and reliable performance after heat treatment, 27MnCrB5-2 steel bars are ideal for automotive and engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 41CrS4 is a resulphurized chromium alloy steel grade developed for applications requiring high strength, improved hardenability, and excellent machinability. The controlled addition of sulphur (S) enhances cutting performance and chip formation, making this grade particularly suitable for high-speed machining and large-scale production of precision components. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41CrS4 steel delivers higher strength and hardness compared to lower carbon chromium grades, while maintaining good toughness after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41CrS4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 9 – 11% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with superior machinability • Higher strength due to increased carbon content • Good hardenability and wear resistance • Suitable for quenching and tempering • Reliable performance in dynamic and torsional load conditions Material Characteristics: EN 10083-3 41CrS4 alloy steel bar combines high strength with improved machinability. The sulphur addition enhances tool life and cutting efficiency, while chromium improves hardenability and wear resistance. It is well-suited for precision machined components requiring strength and production efficiency. Applications: • High-strength machined shafts and spindles • Automotive transmission components • Gear blanks and drive parts • Bolts, studs, and fasteners • Mass-produced precision engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41CrS4 alloy steel bars in various sizes and finishes to meet demanding industrial and machining requirements. With enhanced machinability and strong mechanical properties, 41CrS4 steel bars are ideal for high-volume and precision engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 37CrS4 is a resulphurized chromium alloy steel grade designed for applications requiring good strength, improved hardenability, and enhanced machinability. The addition of sulphur (S) improves cutting performance, making this grade particularly suitable for high-speed machining and large-scale production of precision components. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37CrS4 steel provides a reliable balance of strength, wear resistance, and machinability after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (37CrS4): • 37 – Approx. 0.37% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.34 – 0.41 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9 – 11% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with improved machinability • Good strength and wear resistance after heat treatment • Better cutting performance for automatic machining • Suitable for medium to high-strength applications • Reliable hardenability compared to plain carbon steels Material Characteristics: EN 10083-3 37CrS4 alloy steel bar offers a strong combination of strength and machinability. The sulphur addition enhances chip formation and tool life during machining, while chromium improves hardenability and wear resistance. It is suitable for precision components requiring both mechanical strength and efficient production. Applications: • Machined shafts and spindles • Automotive transmission components • Gear blanks and mechanical parts • High-strength fasteners • Mass-produced engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 37CrS4 alloy steel bars in various sizes and finishes to meet industrial and machining requirements. With enhanced machinability and reliable mechanical properties, 37CrS4 steel bars are ideal for precision and high-volume engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.

EN 10083-3 41Cr4 is a chromium alloy steel grade designed for applications requiring high strength, good toughness, and improved hardenability after heat treatment. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41Cr4 steel delivers enhanced mechanical performance and wear resistance compared to lower carbon alloy steels. 41Cr4 alloy steel bars are widely used in components subjected to high torsional stress, bending loads, and dynamic forces. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality assurance to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41Cr4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength, hardenability, and wear resistance • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with higher carbon content for improved strength • Good hardenability and wear resistance • Suitable for quenching and tempering • Good fatigue resistance under dynamic loading • Reliable mechanical performance in heat-treated condition Material Characteristics: EN 10083-3 41Cr4 alloy steel bar provides a strong combination of strength, toughness, and abrasion resistance. The higher carbon content allows for greater hardness after heat treatment, while chromium enhances depth of hardening and wear resistance. Applications: • Shafts, spindles, and axles • Gears and pinions • High-strength bolts and fasteners • Automotive transmission components • Heat-treated engineering parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41Cr4 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With high strength, good hardenability, and reliable wear resistance, 41Cr4 steel bars are suitable for a wide range of industrial and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar