'particulate impact slag'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchange surfaces such as boiler tubes, superheaters, and economizer coils from erosion, scaling, impact from ash particles, and flue gas corrosion. These shields are commonly applied in power plants, waste heat recovery boilers, and industrial heating systems to increase the service life of tubes and improve overall system reliability. Their semi-cylindrical shape ensures a snug fit over tube surfaces, especially in zones exposed to high-velocity gas flow or particulate matter. SS 410 Half Round Tube Shield for LTSH Tube The SS 410 Half Round Tube Shield is manufactured from martensitic stainless steel grade 410. This material offers high mechanical strength, moderate corrosion resistance, and excellent resistance to wear and oxidation in mildly corrosive and thermal environments. Specifically developed for Low Temperature Superheater (LTSH) applications, the SS 410 shield provides effective surface protection against soot, fly ash, and erosive gas streams where thermal and mechanical stresses are present. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Tube Shields for LTSH applications, offering durable, cost-effective protection in thermal and industrial systems. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for low-temperature superheater zones exposed to fly ash erosion, oxidation, mechanical abrasion, and light corrosion. Uses • Installed on LTSH tube surfaces in power boilers to protect against particulate erosion and flue gas impact • Shields return bends and convection coils in HRSGs and WHRBs exposed to fluctuating gas temperatures • Used in process boilers and steam generators handling slightly corrosive or abrasive flue gases • Effective for dry ash and solid particulate protection in coal and biomass-fired units • Ideal for applications where wear resistance and moderate corrosion protection are critical Features • High mechanical strength – Withstands erosion, abrasion, and mechanical stress in high-flow zones • Moderate corrosion and oxidation resistance – Suitable for dry and mildly corrosive flue gas streams • Custom-fit – Fabricated to match the diameter, curvature, and layout of LTSH tubes • Easy installation – Compatible with weld-on, clamp-on, or banding installation methods • Cost-effective protection – Durable performance at an economical price point • Available in multiple lengths, thicknesses, and tube radii as per application needs Applications • thermal power plants – Protects LTSH tubes from fly ash impact and erosion in dry flue gas paths • waste heat recovery boilers – Applied in low-temperature return sections vulnerable to mechanical wear • steam generation systems – Shields superheater tubes operating in abrasive flue gas conditions • coal-fired boilers – Guards against slag and ash erosion in lower convection zones • process and utility boilers – Extends tube life in units operating with solid fuel combustion Conclusion The SS 410 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable, abrasion-resistant protection for superheater and boiler tubes in low-temperature flue gas environments. With its excellent wear resistance and mechanical durability, it is a practical choice for enhancing system performance and reducing downtime in power and industrial boilers. For custom sizing, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, and surface degradation in high-temperature and corrosive environments. These shields are used extensively in power plants, chemical processing units, and industrial heating systems. Their half-round construction enables fast and secure installation over both straight and curved tube surfaces, providing an effective barrier against damage from flue gas, slag, and particulate impact. SS 430 U Type Inner Half Round Tube Shield The SS 430 U Type Inner Half Round Tube Shield is manufactured from ferritic stainless steel grade 430, known for its good corrosion resistance, excellent thermal conductivity, and oxidation resistance. It performs reliably in moderate-temperature applications and provides dependable protection against scaling and surface deterioration. The inner U-type configuration is specifically engineered to cover the inside arc of U-bend tubes, which are particularly vulnerable to high-velocity gas flow and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes to guard against turbulence-driven erosion, slag buildup, and scaling in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 U Type Inner Half Round Tube Shields, offering reliable protection components for heat-exposed industrial systems. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and oxidizing environments where high thermal conductivity and scaling resistance are required, especially in non-welded systems. Uses • Installed on inner arc of U-bend tubes in boiler and superheater coils subject to flue gas turbulence • Protects return bends in WHRBs and HRSGs from surface degradation and slag impact • Used in heat exchangers and process heaters with moderate corrosion and temperature exposure • Applied in thermal processing plants, food-grade heating systems, and chemical units • Effective for curved coil protection in dryers, economizers, and incinerator heat recovery sections Features • Good corrosion and oxidation resistance – Performs well in moderately aggressive environments • Inner arc coverage – Specifically shields areas affected by heat, scale, and turbulent flow • Cost-effective – Offers a balance between performance and affordability for general-purpose applications • Thermal stability – Maintains structural integrity at service temperatures up to 815°C • Custom-fabricated – Tailored to match specific tube bend radius and outer diameter for secure fit • Easy installation – Compatible with clamp-on, banding, or weld-on mounting for fast and efficient assembly Applications • power generation – Used in superheater and economizer return bends to prevent scale and erosion • chemical and food industry – Applied in heat recovery systems requiring corrosion-resistant inner arc protection • waste heat recovery – Installed in WHRB and HRSG curved tubes to reduce slag and flue gas impact • dryers and kilns – Shields inner U-bend tubes in rotating or stationary heating equipment • process heating units – Provides mechanical and thermal protection for tubes exposed to oxidizing gas streams Conclusion The SS 430 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and economical solution for protecting the inner arcs of U-bend tubes in moderately corrosive and thermal environments. With its ferritic composition, good thermal performance, and ease of installation, it is ideal for general-purpose heat system applications. For technical assistance, customized dimensions, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, and thermal damage in high-temperature environments. These shields are essential in applications where tube surfaces are exposed to abrasive flue gases, slag buildup, and turbulent flow conditions. Their half-round design allows secure placement over straight or curved tube sections, offering durable protection and prolonging service life without requiring major system modifications. SS 420 U Type Inner Half Round Tube Shield The SS 420 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, known for its high surface hardness, excellent wear resistance, and fair corrosion resistance. This grade is ideal for applications where mechanical erosion is a concern. The inner U-type configuration is engineered to protect the internal curvature of U-bend tubes, which are commonly affected by localized turbulence, scale accumulation, and repeated thermal cycling. • Inner U Type Half Round Tube Shield – Specifically designed to guard the internal arc of U-bend tubes from erosion, slag impact, and high-temperature scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 420 U Type Inner Half Round Tube Shields, offering durable and cost-effective protective components for demanding industrial environments. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for systems where tubes are exposed to abrasive gases, slag, and scaling, especially where high surface hardness and moderate corrosion resistance are required. Uses • Installed on the inner arc of U-bend tubes in high-temperature boiler and superheater sections • Shields return bends in WHRBs, HRSGs, and industrial furnace coils exposed to abrasive or turbulent flow • Applied in curved tube sections of heat exchangers and reformers subject to slag and scale deposits • Used in chemical and petrochemical units handling combustion gases and steam • Effective in power and process plants where mechanical wear and erosion resistance are crucial Features • High wear resistance – Excellent surface hardness provides long-lasting protection in abrasive environments • Inner arc coverage – Shields areas prone to turbulence, scale buildup, and gas erosion • Thermal durability – Performs reliably in elevated temperature service conditions up to 650°C • Custom design – Tailored to match the exact tube bend radius and diameter for optimal protection • Simple installation – Compatible with clamp-on, weld-on, or banding methods for secure fitment • Economical solution – Combines durability and affordability for routine and critical tube protection needs Applications • thermal power plants – Protects inner surfaces of U-bends in superheaters and economizers from erosion • petrochemical processing – Shields tube bends exposed to acidic and particulate-laden gases • waste heat recovery units – Guards against scale and slag accumulation in WHRB and HRSG return bends • chemical industries – Provides erosion resistance in heat exchanger bends carrying corrosive vapors • furnaces and process heaters – Used on return coil sections exposed to direct flame or hot gases Conclusion The SS 420 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers robust inner arc protection for U-bend tubes in high-wear and high-temperature applications. Its excellent hardness and mechanical resilience make it well-suited for thermal systems facing abrasive and corrosive environments. For technical assistance, customization, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler and heat exchanger tubes from surface erosion, slag deposition, scaling, and mechanical damage in high-temperature operating conditions. These shields are widely used in power plants, thermal processing units, and industrial boilers where tube surfaces face direct exposure to flue gases and abrasive particles. The half-round structure allows for easy installation over curved or straight sections, providing long-term tube protection and reducing unplanned maintenance. 1Cr13 U Type Outer Half Round Tube Shield The 1Cr13 U Type Outer Half Round Tube Shield is manufactured from 1Cr13, a martensitic stainless steel with good hardness, moderate corrosion resistance, and excellent resistance to high-temperature oxidation. This outer U-type configuration is designed to shield the outer arc of U-bend tubes where erosion, scaling, and heat-induced wear are most intense. With its balance of strength and heat resistance, 1Cr13 is suitable for service in moderately corrosive environments involving flue gas exposure and mechanical impact. • Outer U Type Half Round Tube Shield – Covers the outer curve of U-bend tubes, providing a protective barrier against gas erosion, flame impingement, and slag buildup. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr13 U Type Outer Half Round Tube Shields, offering reliable protection for industrial systems operating under high thermal and abrasive conditions. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for applications with moderate corrosion exposure and high thermal and mechanical stress, including utility boilers, heat exchangers, and furnace systems. Uses • Protection of U-bend outer arcs in superheaters and reheaters in power and utility boilers • Shielding external tube curves in economizers, waste heat recovery units, and HRSGs • Coverage for return bends in industrial exhaust systems and flue gas ducts • Ideal for process heaters, furnace tubes, and high-temperature steam lines exposed to soot, slag, and scale • Suitable for systems requiring mechanical protection and moderate corrosion resistance Features • Good mechanical strength – Martensitic structure provides resistance to wear, abrasion, and high-velocity gas flow • Moderate corrosion resistance – Chromium content offers basic protection in mildly corrosive or oxidizing environments • Thermal stability – Maintains structural integrity in high-temperature zones with consistent exposure to flue gases • Outer arc protection – Specifically designed to guard the most exposed surface of U-bend tubes • Custom fit – Manufactured to match specific tube diameters and bend radii for precise, secure installation • Easy to install – Fastened using clamps, stainless bands, or tack welds without disrupting system operation • Economical and durable – Offers a cost-effective solution for extending tube service life under moderate conditions Applications • power plants – Used on U-bend outer arcs in superheaters and economizers to resist scaling and erosion • chemical and refining industries – Shields outer tube curves in process heaters exposed to heat and mechanical wear • waste heat recovery systems – Protects U-bend surfaces from slag and particulate impact in WHRBs and HRSGs • general industrial boilers – Provides protection in high-heat flue gas paths with minimal chloride exposure • metallurgy and cement processing – Applied in return bends in heating systems exposed to high-temperature dust and gas streams Conclusion The 1Cr13 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and cost-effective solution for shielding U-bend tube outer surfaces in boilers, heat exchangers, and industrial furnace systems. With reliable mechanical strength, moderate corrosion resistance, and high-temperature performance, this shield is ideal for systems requiring durable protection in abrasive and thermally demanding conditions. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-crafted protective components used to shield boiler and heat exchanger tubes from high-temperature oxidation, slag accumulation, erosion, and thermal fatigue. These shields are essential in industrial systems where tubes are exposed to flue gases, particulate flow, and repeated heating cycles. Their half-round design enables efficient and secure installation over straight or curved tube sections, significantly extending tube life and reducing maintenance frequency. 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield is manufactured from a high-temperature resistant austenitic alloy containing 25% chromium, 20% nickel, and 2% silicon. This combination offers excellent oxidation resistance, strong thermal stability, and enhanced anti-scaling performance at elevated temperatures. Designed specifically to cover the outer arc of U-bend tubes, this shield protects surfaces most exposed to hot gases, flame impingement, and corrosive particles in demanding thermal environments. • Outer U Type Half Round Tube Shield – Protects the external arc of U-bend tubes from direct exposure to slag, high-velocity flue gas, and oxidizing atmospheres. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Outer Half Round Tube Shields, offering durable and heat-resistant solutions for thermal, petrochemical, and metallurgical applications. Chemical Composition of 1Cr25Ni20Si2 – Austenitic Heat-Resistant Alloy • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for environments requiring resistance to oxidation, thermal cycling, and high-temperature corrosion, especially in furnaces and exhaust systems. Uses • Outer arc protection of U-bend tubes in reheaters and superheaters exposed to slag, flame, and flue gas in power plants • Shielding external curves of return bends in waste heat recovery units (WHRBs) and HRSGs • Applied in radiant coils and heat exchanger bends operating in high-temperature industrial furnaces • Suitable for petrochemical processing units, steam reformers, and chemical heaters handling oxidizing or carburizing gases • Ideal for high-heat metallurgical and cement kiln systems requiring thermal fatigue and scale resistance Features • Excellent high-temperature oxidation resistance – High chromium and silicon content forms a stable protective scale layer • Enhanced anti-scaling performance – Withstands prolonged exposure to oxidizing environments up to 1150°C • Outer bend protection – Shields the most exposed section of U-bend tubes from erosion, slag, and thermal impact • Precision fitment – Custom-made to match tube radius and diameter for secure, rattle-free installation • Easy to install – Secured by clamps, stainless steel bands, or tack welding without disassembling the system • Long operational lifespan – Reduces tube wear and replacement frequency in aggressive thermal service conditions Applications • power generation – Used on U-bend outer arcs in superheaters and reheaters for oxidation and slag protection • petrochemical plants – Shields tube bends in reformers and high-temperature heaters exposed to process gas erosion • waste heat recovery boilers – Installed in WHRBs and HRSGs operating under fluctuating temperatures and gas flow • cement and metallurgy industries – Protects curved tubes and heat exchanger bends exposed to high-temperature dust and gas streams • furnace and incineration systems – Applied to outer arcs in radiant coils subjected to direct flame and extreme heat Conclusion The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance shielding component designed for the most demanding high-temperature industrial environments. With its superior oxidation resistance, scale protection, and thermal fatigue strength, it provides lasting protection to U-bend tubes in boilers, furnaces, and heat exchangers across the power, petrochemical, and metallurgical sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to safeguard boiler and heat exchanger tubes from erosion, scaling, and thermal degradation. These shields are essential for industrial systems subjected to high-temperature flue gases, particulate abrasion, and corrosive atmospheres. The half-round design allows for simple installation over both straight and curved tube surfaces, enhancing tube longevity and reducing unplanned maintenance. SS 420 U Type Outer Half Round Tube Shield The SS 420 U Type Outer Half Round Tube Shield is manufactured from SS 420, a high-carbon martensitic stainless steel offering excellent hardness, strength, and moderate corrosion resistance. This outer U-type shield is designed specifically to protect the outer arc of U-bend tubes, where direct exposure to flame, slag, and abrasive gas streams accelerates wear. SS 420’s heat resistance and hard surface make it well-suited for shielding critical tube areas in high-wear, high-temperature applications. • Outer U Type Half Round Tube Shield – Provides robust coverage for the external curve of U-bend tubes, defending against mechanical erosion, scaling, and thermal fatigue. Ladhani Metal Corporation is a prominent manufacturer, supplier, and exporter of SS 420 U Type Outer Half Round Tube Shields, delivering reliable protection in harsh industrial operating environments. Chemical Composition of SS 420 – High-Carbon Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, abrasive environments where mechanical strength and surface durability are critical, with moderate corrosion exposure. Uses • Protection of U-bend outer surfaces in superheaters, reheaters, and economizers in thermal power plants • Shielding external curves in gas heaters, exhaust systems, and flue ducts prone to slag or particulate erosion • Applied in return bends of waste heat recovery systems and HRSGs to guard against high-velocity gas wear • Ideal for industrial furnaces, incinerators, and heat exchangers operating in high-heat and abrasive zones • Suitable for applications where resistance to scaling, mechanical stress, and oxidation is required Features • High hardness and wear resistance – Martensitic steel structure offers excellent protection against abrasion and mechanical impact • Thermal durability – Performs well under high-temperature conditions with good resistance to scaling and thermal fatigue • Outer arc shielding – Specifically designed to guard the most exposed curvature of U-bend tubes from direct flame and gas stream contact • Precision-engineered – Fabricated to exact tube radius and diameter for secure, vibration-resistant installation • Simple installation – Easily mounted using clamps, tack welds, or stainless banding without system disassembly • Cost-efficient protection – Provides a durable solution with a balance of strength and corrosion resistance at an economical price Applications • thermal power stations – Used to shield outer curves of U-bend tubes from flame impingement and gas erosion • industrial boilers and furnaces – Protects return bends in high-heat, high-wear zones prone to slag accumulation and scale formation • waste heat recovery boilers – Installed in WHRB and HRSG systems to extend tube life under hot gas and particulate exposure • chemical and petrochemical industries – Suitable for heaters and exchangers where thermal stress and gas impact degrade surfaces • process heating systems – Applied in equipment handling high-velocity gas or steam that contributes to tube wear and surface damage Conclusion The SS 420 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a dependable and rugged solution for protecting the outer arcs of U-bend tubes in boilers, heat exchangers, and high-temperature processing systems. Its high strength, excellent wear resistance, and thermal durability make it ideal for applications where erosion and mechanical damage are frequent. Customizable and easy to install, it supports long-term reliability and reduced operational downtime in demanding industrial conditions. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316 U Type Outer Half Round Tube Shield The SS 316 U Type Outer Half Round Tube Shield is manufactured from SS 316, a molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance, especially against chlorides, acidic media, and pitting. This outer U-type configuration is specifically designed to protect the outer curvature of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. It offers effective shielding in high-temperature, corrosive environments where external tube surfaces are exposed to flue gases, slag accumulation, and erosion. • Outer U Type Half Round Tube Shield – Covers the external arc of U-bend tubes, guarding against flame impingement, thermal degradation, and corrosive gas attack. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316 U Type Outer Half Round Tube Shields, delivering precision solutions for demanding thermal and chemical processing applications. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for high-temperature systems operating in corrosive environments with exposure to chlorides, acidic gases, steam, and thermal cycling. Uses • Outer arc protection of U-bend tubes in superheaters and reheaters in thermal and nuclear power plants • Shielding curved tube bends in petrochemical heat exchangers and steam reformers • Coverage for WHRB and HRSG outer U-bend sections exposed to abrasive and corrosive flue gas streams • Applied to return bends in condensers, evaporators, and marine heat exchangers exposed to saline or acidic media • Suitable for process industries requiring excellent corrosion resistance and thermal stability Features • Excellent corrosion resistance – Molybdenum-enhanced alloy provides high resistance to pitting, crevice corrosion, and chloride attack • Outer U-bend protection – Shields the most vulnerable outer curvature from erosion, heat stress, and slag impact • High-temperature durability – Maintains structural stability under continuous and cyclic heat conditions • Custom fitment – Manufactured to precisely match tube diameter and bend radius for a snug and vibration-free installation • Easy to install – Secured with clamps, tack welds, or stainless steel bands without system disassembly • Long service life – Reduces tube damage, extends maintenance intervals, and enhances operational efficiency Applications • power generation – Installed in U-bend tube outer arcs in superheaters and reheaters to prevent oxidation and surface scaling • petrochemical and refinery plants – Used in high-temperature heat exchangers and reformers exposed to corrosive process gases • waste heat recovery boilers – Shields outer tube bends from flue gas erosion and slag accumulation in WHRBs and HRSGs • chemical and fertilizer plants – Protects external surfaces of U-bends in reactors and ammonia reformers against acidic gas attack • marine and coastal installations – Ideal for heat exchangers and condensers operating in chloride-laden and saline environments Conclusion The SS 316 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and corrosion-resistant solution for protecting the outer arcs of U-bend tubes in heat exchangers, boilers, and thermal processing equipment. With superior resistance to chlorides, acids, and oxidizing gases, along with high-temperature performance and ease of installation, this shield is a dependable choice for power, petrochemical, and marine industry applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310S U Type Outer Half Round Tube Shield The SS 310S U Type Outer Half Round Tube Shield is designed using SS 310S, a low-carbon austenitic stainless steel known for its excellent resistance to oxidation, high-temperature strength, and enhanced weldability. This outer U-type shield is specifically engineered to cover and protect the outer arc of U-bend tube sections in superheaters, reheaters, waste heat recovery systems, and high-temperature heat exchangers. With its high chromium and nickel content, SS 310S provides superior performance in oxidizing and carburizing environments while maintaining structural stability during prolonged thermal cycling. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bend tubes from slag deposition, hot gas erosion, scale formation, and high-temperature fatigue. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S U Type Outer Half Round Tube Shields, offering high-performance solutions for critical thermal and process applications across industries. Chemical Composition of SS 310S – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments where thermal stability, scale resistance, and corrosion protection are essential. Uses • Outer surface protection of U-bend tubes in superheaters and reheaters of thermal and industrial power plants • Shielding of return bends in petrochemical reformers, process heaters, and high-temperature exchangers • Applied to outer arcs in WHRBs and HRSGs subjected to thermal cycling, slag erosion, and hot flue gas exposure • Suitable for use in chemical and gas processing units handling oxidizing or acidic exhausts at elevated temperatures • Ideal for incinerator tubes, radiant coils, and furnace bends operating under continuous or cyclic heat conditions Features • Outstanding high-temperature strength – Performs effectively up to 1150°C with excellent resistance to scaling and oxidation • Enhanced weldability – Low carbon content minimizes the risk of sensitization and intergranular corrosion after welding • Outer U-bend coverage – Designed for targeted protection where erosion and thermal impact are most severe • Precision fitment – Manufactured to exact tube radius and diameter specifications for tight, vibration-free installation • Quick installation – Easily mounted using clamps, tack welds, or stainless steel banding without system disassembly • Long-term durability – Resistant to cracking, scaling, and corrosion under thermal fatigue, reducing maintenance and downtime Applications • thermal power plants – Installed on U-bend tube outer curves in superheaters and reheaters for oxidation and erosion protection • petrochemical plants – Used in reformers and cracking furnaces exposed to high-temperature and oxidizing environments • waste heat recovery systems – Protects return bends in WHRBs and HRSGs from hot gas flow, slag buildup, and scaling • chemical and gas processing – Shields bends in high-temperature exchangers and preheaters from corrosive and oxidizing media • furnaces and industrial incinerators – Applied to radiant tubes and burner bends subjected to direct flame and thermal cycling Conclusion The SS 310S U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a premium solution for protecting U-bend tube outer arcs in boilers and heat exchangers exposed to severe heat and gas flow conditions. With excellent oxidation resistance, low carbon content for improved weldability, and precision design for long-lasting performance, this shield enhances the lifespan and reliability of thermal systems across a wide range of industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.