Description
As a distributor of titanium plate we stock widths from 36" to 72, lengths up to 240" and thicknesses up to 7".
Available grades:
CP Grade 1
CP Grade 2
Grade 7
Grade 19
Grade 5 (6Al-4V)
Grade 6 (5Al-2.5Sn)
Grade 6Al-2Sn-4Zr-2Mo (6-2-4-2)
Grade 6Al-4V ELI (Formerly Grade 23)
Grade 6Al-6V-2Sn (6-62)
Grade 8Al-1Mo-1V (8-1-1)
Grade 9 (3Al-2.5V)
Titanium plate grade bellow
Ti CP Grade 1 Ti CP Grade 2 TI CP GRADE 3
Lower Strength, softest, unalloyed Ti grade
with highest ductility, cold formability, and
impact tou
ghness, with excellent resistance to
mildly reducing to highly oxidixing media with
or without chlorides and high weldability.
Moderate strength unalloyed Ti with excellent
weldability, cold formability, and fabricability;
Excellent resistance to midly reducing to highly
oxidizing media with or without chlorides.
Approved for sour service use under the NACE
MR-01-75 Standard
Slightly stronger version of Ti CP Grade 2
with similar corrosion resistance with good
weldability and reasonable cold
formability/ductibility.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded
Pipe/Tubing, Wire.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded
Tubing/Pipe, Seamless Tubing, Wire, Foil
Ingot/Bloom, Bar, Billet, Plate, Strip,
Welded Tubing/Pipe
Ti Grade 16 Ti Grade 17 Ti Grade 26
Lower cost, leaner Pd version of Ti Grade 7
with equivalent physical/mechanical
properties, and similar corrosion resistance.
Tubing Welded Pipe.
Lower cost, leaner Pd version of Ti. Grade 11
with equivalent physical, mechanical properties
and fabricability (soft grade) and similar
corrosion resistance. Tubing Welded Pipe.
Lower cost, Ru-containin
g alternative for Ti
Grade 7 with equivalent
physical/mechanical properties and
fabricability and similar corrosion
resistance. Tubing, welded pipe.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded
Tubing/Pipe, Wire
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded
Tubing/Pipe, Wire
Ingot/Bloom, Bar, Billet, Plate, Strip,
Welded Tubing/Pipe, Wire
Ti Grade 18 Ti Grade 28 Ti Grade 6
Pd-enhanced version of Ti-3Al-2.5V with
equivalent physical and mechanical properties
and fabricability, offering elevated resistance
to dilute reducing acids and crevice corrosion
in hot halide (brine) media.
Ru-enhanced version of Ti-3Al-2.5V with
equivalent physical and mechanical properties
and fabricability, offering elevated resistance to
dilute reducing acids and crevice corrosion in
hot halide (brine) media. Approved for sour
service use under the NACE MR-01-75 Standard.
Weldable, non-ageable, high-strength alloy
offering good high temperature stability,
strength, oxidation and creep resistance.
Ingot/Bloom, Billet, Welded Pipe, Plate,
Strip, Welded Tubing, Seamless Pipe
Ingot/Bloom, Billet, Welded Pipe, Plate, Strip,
Welded Tubing, Seamless Pipe, Wire Ingot/Bloom, Bar, Billet, Sheet
Ti 6Al-4V [Ti-6-4] (Grade 5) Ti-6Al-4V ELI [Ti-6-4-ELI] (Grade 23) Ti-6Al-4V-0.1Ru (Grade 29) [Ti-6- 4-Ru]
Heat treatable, high-strength, most
commercially available Ti alloy ("workhorse"
alloy for aerospace applications), for use up to
400C offerin
g an excellent combination of hi
gh
strength, toughness, and ductility along with
good weldability and fabricability.
Extra low interstitial version of Ti-6Al-4V offerin
g
improved ductility and fracture toughness in air
and saltwater environments, along with
excellent toughness, strength, and ductility in
cryogenic service as low as -255C. Typically
used in a non-aged condition for maximum
toughness.
Extra low interstitial, Ru-containing version
of Ti-6Al-4V offering improved fracture
toughness in air, seawater, and brines,
along with resistance to localized corrosion
in sweet and sour acidic brines as high as
330 C. Approved for sour service use
under the NACE MR-01-75 Standard.
Ingot/Bloom, Bar, Billet, Plate, Sheet,
Seamless Pipe/Tubing, Wire, Foil
Ingot/Bloom, Bar, Billet, Plate, Sheet, Wire,
Seamless Tubing, Foil
Ingot/Bloom, Bar, Billet, Plate, Sheet,
Seamless Pipe, Wire
Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.15Si [Ti-6-
22-22] Ti-4.5V-3V-2Mo-2Fe [SP-700] Ti-5Al-4Cr-4Mo-2Sn-2Zr [Ti-17]
Heat treatable, high strength forging alloy
with good strength and creep resistance to
temperature as high as 400 C.
Heat treatable, high strength Ti alloy with
strength and fracture toughness-to-strength
properties superior to those of Ti-6Al-4V, with
excellent superplastic formability and thermal
stability.
Heat treatable, high strength Ti alloy with
superior strength and exceptional hot and
superplastic formability compared to Ti-6Al4V, combined with good ductility and
fatigue resistance.
Ingot/Bloom, Bar, Billet, Plate, Sheet, Wire Ingot/Bloom, Bar, Billet, Plate, Sheet Ingot/Bloom, Bar, Billet
Ti-3Al-8V-6Cr-4Zr-4Mo-0.05Pd [Ti
Beta-C/Pd] (Grade 20)
A Pd-containing version of the Ti-38644 alloy
(Beta-C/Pd) possessing equivalent
physical/mechanical properties, but with
significantly enhanced resistance to stress and
localized corrosion in high temperature brines.
Ingot/Bloom, Bar, Billet, Seamless Pipe
TI CP GRADE 4 TI GRADE 7 TI GRADE 11
Much Stronger, high interstitial
version of Grades 2 and 3 Ti with
reasonable weldability, and reduced
ductility and cold-formability.
Most resistant Ti alloy to corrosion in reducing
acids and localized attack in hot halide media,
with physical/mechanical properties equivalent
to Grade 2 and excellent
weldability/fabricability.
Most resistant Ti alloy to corrosion in reducin
g acids
and localized attack in hot halide media, with
physical, mechanical, formability properties
equivalent to Gr.1 Ti (soft grade) and excellent
weldability.
Ingot, Bloom, Bar, Billet, Plate,
Strip
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded
Tubing/Pipe, Wire
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded
Tubing/Pipe, Wire
Ti Grade 27 Ti Grade 12 Ti Grade 9
Lower cost, Ru-containing
alternative for Ti Grade 11 with
equivalent physical/mechanical
properties (soft grade) and
fabricability and similar corrosion
resistance
Highly weldable and fabricable Ti alloy offering
improved strength and pressure code design
allowables, hot brine crevice corrosion, and
reducing acid resistance compared to Ti Grade
1, 2, and 3. Approved for sour sergice use
under the NACE MR-01-75 Standard.
Medium strength, non-ageable Ti alloy offering
highest strength and design allowables under the
pressure vessel code, with
good weldability and cold
fabricability for mildly reducing to mildly oxidizing
media.
Ingot/Bloom, Bar, Billet, Plate,
Strip, Welded Tubing/Pipe
Ingot/Bloom, Billet, Welded Pipe, Plate, Strip,
Welded Tubing, Seamless Pipe, Wire
Ingot/Bloom, Billet, Welded Pipe, Plate, Strip,
Welded Tubing, Foil, Seamless Pipe, Wire
Ti 5Al-2.5Sn ELI [Ti-5-2.5
ELI] Ti-8Al-1Mo-1V [Ti-8-1-1] Ti-6Al-2Sn-4Zr-2Mo-0.1Si [Ti-6-2-4-2S]
Extra low interstitial version of Ti5Al-2.5Sn exhibiting an excellent
combination of toughness and
stren
gth at cryo
genic temperatures;
suited for cryogenic vessels for
service as low as -255C.
Highly creep-resistant, non-ageable, weldable,
high-strength Ti alloy for use up to 455C;
exhibiting the lowest density and highest
modulus of all commercial Ti alloys.
Weldable, high strength Ti alloy offering excellent
strength, stability, and creep resistance to
temperatures as high as 550C.
Ingot/Bloom, Bar, Billet Ingot/Bloom, Bar, Billet, Sheet Ingot/Bloom, Bar, Billet, Sheet
Ti-6Al-7Nb Ti-6Al-6V-2Sn [Ti-6-6-2] Ti-6Al-2Sn-4Zr-6Mo [Ti-6-2-4-6]
High strength Ti alloy with good
toughness and ductility, used
primarily for medical implants
stemming from its excellent
biocompatibility.
Heat treatable, high strength Ti alloy with
higher strength and section hardenability than
Ti-6Al-4V, but with lower toughness and
ductility, and limited weldability. Can be used
in mill annealed or in the aged (very high
strength) condition.
Heat-treatable, deep hardenable, very hi
gh stren
gth
Ti alloy with improved strength to temperatures as
hi
gh as 450C, with limited weldability. Approved for
sour service under the NACE MR-01-75 Standard.
Ingot/Bloom, Bar, Billet, Wire Ingot/Bloom, Bar, Billet, Plate, Sheet Ingot/Bloom, Bar, Billet
Ti-10V-2Fe-3Al [Ti-10-2-3] Ti-3Al-8V-6Cr-4Zr-4Mo [Ti Beta-C] (Grade 19) Ti-3Al-8V-6Cr-4Zr-4Mo [Ti Beta-C] (Grade 19)
Heat treatable, deep section
hardenable, very high strength Ti
alloy with superior strength and
creep resistance over Ti-6Al-4V to
temperatures as high as 400 C and
limited weldability.
Heat treatable, deep hardenable, very high
strength Ti alloy possesing superior fatigue and
strength/toughness combinations, with
exceptional hot-die forgeability, but limited
weldability.
A heat-treatable, deep section hardenable, very
high strength Ti alloy possessing good
toughness/strength properties, low elastic modulus
and elevated resistance to stress and localized
corrosion in high temperature sweet and sour
brines. Approved for sour service under the NACE
MR-0175 Standard
Ingot/Bloom, Bar, Billet Ingot/Bloom, Bar, Billet, Seamless Pipe, Wire Ingot/Bloom, Bar, Billet, Seamless Pipe
Chat with us
Chat with us
