'winery'

Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR5, GR7, GR12 Size: Customized Titanium Dish End Product Information Standard: ANSI/ASME, DIN, GB, EN, JIS, MSS, API, BS, AWWA, GOST etc. Grade: GR1, GR2, GR5, GR7, GR12 OD: 300-2500mm Thickness: 2-300mm Production Process: Cold Forming, Hot Forming Surface Treatment: Sand Blasting, Pickling, Coating etc. Applications: Heat Exchanger, Condenser, Pressure Vessel, Reactor, Storage Tank, Boiler, Absorber etc. Mechanical Properties ASTM Grade Tensile Strength Yield Strength Elongation % ksi Mpa ksi Mpa Gr1 35 240 25 170 24 Gr2 50 345 40 275 20 Gr5 130 895 120 828 10E Gr7 50 345 40 275 20 Gr12 70 485 50 345 18

Product name:Gr7 Titanium dished Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Gr7 Titanium Hemispherical Head Dish-shaped head refers to the head composed of three parts: partial spherical shell, circular arc prayer side and good side (cylinder short treatment). Due to the abrupt change of radius of curvature at the junction between spherical shell and flanged edge, flanged edge and straight edge, the edge stress is much larger than the film stress caused by inner ash, and its mechanical properties are worse than that of spherical and elliptic head. Because of the shallow disc head, the requirements of stamping equipment and mold are low, so it is more convenient to manufacture. Rarely used in force vessels, only where pressure is low and a reduced head depth is required or where a die is lacking. The disc-shaped head is a continuous surface. The radius of curvature of the warp has a sudden change at the junction of three parts. As the curvature changes, there is bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from the other parts. Compared with the oval head, the stress distribution is not as uniform, but the machining is easier, so it is not ideal in engineering use. But when the mold processing of oval head is difficult, disc head is used instead. Size range: 50mm-10000mm with integral formed,larger sizes with subsection formed can be specified. Standard: ANSI, ASME ,MSS, API, DIN, JIS, BS,AWWA Thickness: 2mm-300mm Material: Titanium, titanium alloy Material grade:Grade 7 Application: mainly for pressure vessels and boilers in diverse industry such as oil, chemical,winery, pharmaceutical, environmental and military. Grade 7 (Ti-0.2Pd) titanium Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25

Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR5, GR7, GR12 Size: Customized Titanium Hemispherical heads Titanium Spherical Heads ,aso called Titanium dish head,Titanium Elliptical Heads.It is a kind of boiler part in pressure vessel. It is usually used at both ends of pressure vessels. Then there is a welding pipe fitting product used for plugging at the end of the pipe. There are many forms. The head is a part of the container and is welded to the barrel. According to the different geometric shapes, it can be divided into spherical, elliptical, disc, spherical crown, cone shell and cover, among which spherical, elliptical, disc and spherical crown head are collectively referred to as convex head. In the welding is divided into butt welding head, socket welding head. Used in various vessels and equipment, such as storage tanks, heat exchangers, towers, reactors, boilers and separation equipment, etc. Products Processing Standard Grade Size Titanium Elliptical & Spherical Heads According to ASME VIII-I Standard or DIN28013 GR1, GR2, GR7, GR12, etc. Process: Cold forming and hot forming Inspection: 100% Ultrasonic Test and PT test after forming. (As per requirement.) Applications Mainly for pressure vessels and boilers in diverse industry such as oil, chemical, winery, pharmaceutical, environmental and military. (Titanium dish head )DIN28013: D (mm) s min/max (mm) Volumen (L) h1 (mm) kg pr mm s D (mm) s min/max (mm) Volumen (L) h1 (mm) kg pr mm s 300 4-10 3.5 78 1,0 1550 5-15 483 403 22.5 350 4-10 5.6 91 1.3 1600 5-15 532 416 23.9 400 4-10 8.3 104 1,7 1650 5-15 585 429 25,4 450 4-10 11.8 117 2,1 1700 5-15 640 442 27.0 500 4-10 16.1 130 2.6 1750 5-15 700 455 28.5 550 3-12 21,6 143 3,1 1800 5-15 760 468 30 600 3-12 28,0 156 3.6 1850 5-15 825 481 31.5 650 3-12 36.0 169 4,2 1900 5-15 890 494 33 700 3-12 44,5 182 4,8 1950 5-15 965 507 36 750 3-12 54.5 195 5,5 2000 6-15 1040 520 37 800 3-13 66.5 203 6.2 2050 6-15 1120 533 38.5 850 3-13 79,5 221 7,0 2100 6-15 1200 546 40.5 900 3-13 94 234 乙8 2150 6-15 1290 559 42,5 950 3-13 111 247 8.6 2200 6-15 1380 572 44.5 1000 4-16 130 260 9.5 2250 6-15 1480 685 46.5 1050 4-13 150 273 10,4 2300 6-15 1580 598 46 5 1100 4-13 173 286 11,1 2350 6-15 1690 611 51 1150 4-13 198 299 12.5 2400 6-15 1800 624 53 1200 4-13 225 312 13.6 2450 6-15 1910 637 55 1250 4-13 254 325 14,7 2500 6-15 2030 660 57

Product name:Gr7 Titanium dished Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Gr7 Titanium Hemispherical Head Dish-shaped head refers to the head composed of three parts: partial spherical shell, circular arc prayer side and good side (cylinder short treatment). Due to the abrupt change of radius of curvature at the junction between spherical shell and flanged edge, flanged edge and straight edge, the edge stress is much larger than the film stress caused by inner ash, and its mechanical properties are worse than that of spherical and elliptic head. Because of the shallow disc head, the requirements of stamping equipment and mold are low, so it is more convenient to manufacture. Rarely used in force vessels, only where pressure is low and a reduced head depth is required or where a die is lacking. The disc-shaped head is a continuous surface. The radius of curvature of the warp has a sudden change at the junction of three parts. As the curvature changes, there is bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from the other parts. Compared with the oval head, the stress distribution is not as uniform, but the machining is easier, so it is not ideal in engineering use. But when the mold processing of oval head is difficult, disc head is used instead. Size range: 50mm-10000mm with integral formed,larger sizes with subsection formed can be specified. Standard: ANSI, ASME ,MSS, API, DIN, JIS, BS,AWWA Thickness: 2mm-300mm Material: Titanium, titanium alloy Material grade:Grade 7 Application: mainly for pressure vessels and boilers in diverse industry such as oil, chemical,winery, pharmaceutical, environmental and military. Grade 7 (Ti-0.2Pd) titanium Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25

Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR5, GR7, GR12 Size: Customized Titanium Hemispherical heads Titanium Spherical Heads ,aso called Titanium dish head,Titanium Elliptical Heads.It is a kind of boiler part in pressure vessel. It is usually used at both ends of pressure vessels. Then there is a welding pipe fitting product used for plugging at the end of the pipe. There are many forms. The head is a part of the container and is welded to the barrel. According to the different geometric shapes, it can be divided into spherical, elliptical, disc, spherical crown, cone shell and cover, among which spherical, elliptical, disc and spherical crown head are collectively referred to as convex head. In the welding is divided into butt welding head, socket welding head. Used in various vessels and equipment, such as storage tanks, heat exchangers, towers, reactors, boilers and separation equipment, etc. Products Processing Standard Grade Size Titanium Elliptical & Spherical Heads According to ASME VIII-I Standard or DIN28013 GR1, GR2, GR7, GR12, etc. Process: Cold forming and hot forming Inspection: 100% Ultrasonic Test and PT test after forming. (As per requirement.) Applications Mainly for pressure vessels and boilers in diverse industry such as oil, chemical, winery, pharmaceutical, environmental and military. (Titanium dish head )DIN28013: D (mm) s min/max (mm) Volumen (L) h1 (mm) kg pr mm s D (mm) s min/max (mm) Volumen (L) h1 (mm) kg pr mm s 300 4-10 3.5 78 1,0 1550 5-15 483 403 22.5 350 4-10 5.6 91 1.3 1600 5-15 532 416 23.9 400 4-10 8.3 104 1,7 1650 5-15 585 429 25,4 450 4-10 11.8 117 2,1 1700 5-15 640 442 27.0 500 4-10 16.1 130 2.6 1750 5-15 700 455 28.5 550 3-12 21,6 143 3,1 1800 5-15 760 468 30 600 3-12 28,0 156 3.6 1850 5-15 825 481 31.5 650 3-12 36.0 169 4,2 1900 5-15 890 494 33 700 3-12 44,5 182 4,8 1950 5-15 965 507 36 750 3-12 54.5 195 5,5 2000 6-15 1040 520 37 800 3-13 66.5 203 6.2 2050 6-15 1120 533 38.5 850 3-13 79,5 221 7,0 2100 6-15 1200 546 40.5 900 3-13 94 234 乙8 2150 6-15 1290 559 42,5 950 3-13 111 247 8.6 2200 6-15 1380 572 44.5 1000 4-16 130 260 9.5 2250 6-15 1480 685 46.5 1050 4-13 150 273 10,4 2300 6-15 1580 598 46 5 1100 4-13 173 286 11,1 2350 6-15 1690 611 51 1150 4-13 198 299 12.5 2400 6-15 1800 624 53 1200 4-13 225 312 13.6 2450 6-15 1910 637 55 1250 4-13 254 325 14,7 2500 6-15 2030 660 57

Product name:Gr7 Titanium dished Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Gr7 Titanium Hemispherical Head Dish-shaped head refers to the head composed of three parts: partial spherical shell, circular arc prayer side and good side (cylinder short treatment). Due to the abrupt change of radius of curvature at the junction between spherical shell and flanged edge, flanged edge and straight edge, the edge stress is much larger than the film stress caused by inner ash, and its mechanical properties are worse than that of spherical and elliptic head. Because of the shallow disc head, the requirements of stamping equipment and mold are low, so it is more convenient to manufacture. Rarely used in force vessels, only where pressure is low and a reduced head depth is required or where a die is lacking. The disc-shaped head is a continuous surface. The radius of curvature of the warp has a sudden change at the junction of three parts. As the curvature changes, there is bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from the other parts. Compared with the oval head, the stress distribution is not as uniform, but the machining is easier, so it is not ideal in engineering use. But when the mold processing of oval head is difficult, disc head is used instead. Size range: 50mm-10000mm with integral formed,larger sizes with subsection formed can be specified. Standard: ANSI, ASME ,MSS, API, DIN, JIS, BS,AWWA Thickness: 2mm-300mm Material: Titanium, titanium alloy Material grade:Grade 7 Application: mainly for pressure vessels and boilers in diverse industry such as oil, chemical,winery, pharmaceutical, environmental and military. Grade 7 (Ti-0.2Pd) titanium Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25