Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchange surfaces such as boiler tubes, superheaters, and economizer coils from erosion, scaling, impact from ash particles, and flue gas corrosion. These shields are commonly applied in power plants, waste heat recovery boilers, and industrial heating systems to increase the service life of tubes and improve overall system reliability. Their semi-cylindrical shape ensures a snug fit over tube surfaces, especially in zones exposed to high-velocity gas flow or particulate matter. SS 410 Half Round Tube Shield for LTSH Tube The SS 410 Half Round Tube Shield is manufactured from martensitic stainless steel grade 410. This material offers high mechanical strength, moderate corrosion resistance, and excellent resistance to wear and oxidation in mildly corrosive and thermal environments. Specifically developed for Low Temperature Superheater (LTSH) applications, the SS 410 shield provides effective surface protection against soot, fly ash, and erosive gas streams where thermal and mechanical stresses are present. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Tube Shields for LTSH applications, offering durable, cost-effective protection in thermal and industrial systems. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for low-temperature superheater zones exposed to fly ash erosion, oxidation, mechanical abrasion, and light corrosion. Uses • Installed on LTSH tube surfaces in power boilers to protect against particulate erosion and flue gas impact • Shields return bends and convection coils in HRSGs and WHRBs exposed to fluctuating gas temperatures • Used in process boilers and steam generators handling slightly corrosive or abrasive flue gases • Effective for dry ash and solid particulate protection in coal and biomass-fired units • Ideal for applications where wear resistance and moderate corrosion protection are critical Features • High mechanical strength – Withstands erosion, abrasion, and mechanical stress in high-flow zones • Moderate corrosion and oxidation resistance – Suitable for dry and mildly corrosive flue gas streams • Custom-fit – Fabricated to match the diameter, curvature, and layout of LTSH tubes • Easy installation – Compatible with weld-on, clamp-on, or banding installation methods • Cost-effective protection – Durable performance at an economical price point • Available in multiple lengths, thicknesses, and tube radii as per application needs Applications • thermal power plants – Protects LTSH tubes from fly ash impact and erosion in dry flue gas paths • waste heat recovery boilers – Applied in low-temperature return sections vulnerable to mechanical wear • steam generation systems – Shields superheater tubes operating in abrasive flue gas conditions • coal-fired boilers – Guards against slag and ash erosion in lower convection zones • process and utility boilers – Extends tube life in units operating with solid fuel combustion Conclusion The SS 410 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable, abrasion-resistant protection for superheater and boiler tubes in low-temperature flue gas environments. With its excellent wear resistance and mechanical durability, it is a practical choice for enhancing system performance and reducing downtime in power and industrial boilers. For custom sizing, technical guidance, or quotations, please contact Ladhani Metal Corporation.

DIN 2628 Super Duplex steel flanges PN 250 are high-performance weld neck flanges engineered to meet the stringent requirements of the DIN 2628 standard. Designed for use in high-pressure systems up to 250 bar (3625 psi), these flanges are manufactured from Super Duplex stainless steel—an advanced alloy known for its exceptional strength and superior resistance to aggressive corrosion, particularly in chloride-rich and marine environments. Super Duplex flanges combine high mechanical integrity with excellent resistance to pitting, crevice corrosion, and stress corrosion cracking, making them ideal for demanding and safety-critical applications. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of premium Super Duplex flanges. Our DIN 2628 PN 250 Super Duplex weld neck flanges are trusted by industries such as offshore oil and gas, desalination, chemical processing, and marine engineering for their unmatched durability and reliability. Each flange is precision-engineered to deliver optimal performance under extreme pressure, temperature, and corrosive conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure systems requiring maximum sealing integrity, superior strength, and corrosion resistance. Flange Type: • Weld Neck Flanges Feature a tapered hub that minimizes stress concentration at the weld point. Designed for high-load applications with frequent thermal cycling. • Flat Face (FF) Flanges Flat face design ensures uniform gasket compression and improved safety when mating with cast or brittle components. Super Duplex Steel Grade and Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% Applications: Exceptional resistance to chloride-induced corrosion, pitting, and erosion. Extensively used in offshore platforms, subsea piping, desalination plants, and chemical process systems exposed to severe environments. Applications of DIN 2628 Super Duplex Flanges PN 250: • Offshore Oil and Gas Used in subsea equipment, manifolds, and risers where high mechanical strength and resistance to saltwater and sour gas are critical. • Desalination and Water Treatment Ideal for high-chloride environments such as reverse osmosis systems and thermal desalination plants. • Chemical and Petrochemical Processing Reliable in handling aggressive chemicals, acids, and alkalis in reactors, storage tanks, and high-pressure pipelines. • Marine Engineering Performs well in seawater-exposed structures, including ballast systems, hull penetrations, and fire water systems. • Pulp and Paper Industry Resistant to bleaching agents and corrosive media used in pulp processing and chemical recovery systems. Key Features: • Manufactured to DIN 2628 specifications • PN 250 pressure class suitable for critical pressure-retaining applications • Weld neck configuration provides high structural support and fatigue resistance • Flat face variant for secure sealing in flange assemblies involving cast components • Made from Super Duplex 2507 for exceptional corrosion resistance and strength • Excellent performance in chloride-rich, high-temperature, and high-pressure environments • High resistance to erosion, fatigue, and stress corrosion cracking • Available in customized dimensions, surface finishes, and pressure ratings Conclusion: DIN 2628 Super Duplex Steel Flanges PN 250 from Ladhani Metal Corporation are engineered for the most demanding industrial environments where high pressure, corrosive media, and structural reliability are paramount. Offering the superior properties of Super Duplex 2507, these flanges deliver consistent performance and long-term durability in offshore, chemical, and marine applications. Contact Ladhani Metal Corporation for comprehensive technical data, custom configurations, or a tailored quotation to meet your specific application requirements.

DIN 2628 Inconel flanges PN 250 are high-strength weld neck flanges manufactured in accordance with the DIN 2628 standard. Designed to operate in high-pressure systems up to 250 bar (3625 psi), these flanges offer outstanding performance in extreme environments involving high temperatures, corrosive chemicals, and mechanical stress. Made from Inconel superalloys, they provide excellent resistance to oxidation, thermal fatigue, and pitting, making them ideal for critical applications in demanding industries. Ladhani Metal Corporation is a globally trusted manufacturer and exporter of premium Inconel flanges. Our DIN 2628 PN 250 Inconel weld neck flanges are widely used in sectors such as chemical processing, offshore drilling, aerospace, power generation, and marine engineering. Known for precision engineering, reliability, and resistance to harsh service conditions, these flanges are a preferred choice in pressure-intensive and corrosion-prone systems. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure pipelines requiring superior sealing, thermal resistance, and structural integrity. Flange Type: • Weld Neck Flanges Designed with a tapered hub to reduce stress concentration at the weld point. Ideal for high-pressure and high-temperature environments. • Flat Face (FF) Flanges Flat face design ensures even gasket compression, preventing flange warping and providing secure sealing, especially when used with cast or brittle materials. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Excellent resistance to heat and corrosion by acids and chlorides. Commonly used in heat exchangers, reactors, and high-temperature furnace parts. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.50% • Silicon (Si): ≤ 0.50% Applications: Exceptional corrosion resistance in chloride-bearing environments. Ideal for offshore oil and gas, marine exhaust systems, and chemical plants. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.20 – 0.80% • Carbon (C): ≤ 0.08% Applications: A precipitation-hardened superalloy with outstanding strength, creep resistance, and corrosion resistance at temperatures up to 700°C. Widely used in aerospace turbine engines, nuclear reactors, and high-pressure chemical systems. Applications of DIN 2628 Inconel Flanges PN 250: • Chemical and Petrochemical Plants Ideal for piping systems exposed to aggressive chemicals, high pressures, and temperature fluctuations. • Power Generation Used in nuclear, thermal, and gas-fired power plants where heat and pressure resistance are critical. • Aerospace and Jet Engine Systems 718-grade flanges are suitable for turbine casings, fuel lines, and other high-temperature aircraft components. • Marine and Offshore Engineering Highly corrosion-resistant in saltwater environments, suitable for subsea manifolds, pipelines, and ballast systems. • Heat Treatment and Thermal Processing Used in furnaces, reactors, and pressure vessels subjected to rapid thermal cycling and oxidation. Key Features: • Manufactured according to DIN 2628 standards • PN 250 pressure rating for high-pressure system integrity • Weld neck design ensures optimal strength and flow performance • Available in Inconel 600, 625, and 718 grades • Flat face option for uniform sealing and safety in brittle systems • Excellent resistance to high temperatures, oxidation, and chlorides • Suitable for extreme chemical, thermal, and marine environments • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2628 Inconel Flanges PN 250 from Ladhani Metal Corporation offer the ideal solution for industries demanding high-performance materials under extreme conditions. With options in Inconel 600, 625, and 718, these weld neck flanges combine corrosion resistance, strength, and thermal stability for reliable operation across a wide range of high-pressure applications. Contact Ladhani Metal Corporation for detailed specifications, technical assistance, or to request a tailored quotation.

DIN 2627 Titanium Flanges PN 400 are high-integrity blind flanges manufactured from corrosion-resistant titanium alloys, engineered for extreme pressure applications. These flanges conform to the DIN 2627 standard and are specifically designed to close the end of a piping system, providing a reliable, leak-tight seal. With a pressure rating of PN 400 (400 bar / 5800 psi), these titanium blind flanges are ideal for high-pressure systems operating in chemically aggressive or high-temperature environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, offering top-quality components that comply with stringent international specifications. The DIN 2627 PN 400 titanium flanges are especially suited for high-demand sectors where superior material performance is essential under extreme mechanical and corrosive conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for ultra-high-pressure systems requiring secure isolation and sealing. These flanges ensure operational safety and long-term durability in critical gas, fluid, or chemical applications. Flange Type: • Blind Flanges These solid disk flanges are used to terminate the flow in a pipeline or vessel and can be easily removed for inspection or system modification. They are essential in high-pressure systems for ensuring tight sealing without any flow path. • Flat Face (FF) Flanges Utilized with full-face gaskets and flat mating surfaces, flat face blind flanges distribute bolt load evenly to prevent flange deformation, particularly when paired with brittle or non-metallic components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Trace Elements: Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H) Applications: Grade 2 titanium offers excellent corrosion resistance, good ductility, and weldability, making it suitable for high-pressure chemical processing, marine systems, and water treatment environments. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium delivers superior tensile strength and resistance to fatigue, high temperatures, and corrosion. It is the preferred material for aerospace, defense, offshore drilling, and pressurized chemical applications requiring durability under extreme conditions. Applications of DIN 2627 Titanium Flanges PN 400: • High-Pressure Chemical and Petrochemical Systems Used to terminate pipelines in systems transporting reactive or corrosive chemicals under high pressure. • Offshore Oil and Gas Platforms Ideal for sealing high-pressure flowlines and isolation points exposed to seawater and mechanical stress. • Aerospace Hydraulic and Fuel Systems Applied in high-performance systems requiring lightweight, pressure-resistant sealing. • Marine Engineering and Subsea Installations Deployed in subsea structures and marine piping where both high pressure and chloride-induced corrosion are concerns. • Nuclear and Power Generation Suited for extreme environments involving radioactive, corrosive, or high-temperature media. • Industrial Process Systems Used in closed-loop systems, autoclaves, reactors, and high-pressure vessels. Key Features: • Manufactured according to DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure environments • Exceptional corrosion resistance in seawater and chemical exposure • Titanium Grade 2 and Grade 5 options for specific strength and application needs • Blind flange design for secure system termination • Flat face flanges ensure optimal gasket compatibility and load balance • High strength-to-weight ratio and long service life • Suitable for offshore, aerospace, chemical, and power industries • Custom configurations, sizes, and finishes available upon request Conclusion: DIN 2627 Titanium Flanges PN 400 by Ladhani Metal Corporation are engineered to meet the highest standards of performance in ultra-high-pressure systems. Whether in offshore drilling, aerospace, or advanced chemical processes, these flanges offer unmatched reliability, corrosion resistance, and structural integrity. Contact Ladhani Metal Corporation for technical guidance, material selection, or customized solutions for your specific project needs.

A tungsten alloy disc is a circular piece made from a composite material primarily composed of tungsten and other metals such as nickel, iron, or copper. Known for its exceptional density, high melting point, and resistance to wear and corrosion, tungsten alloy discs are commonly used in applications that require high performance under extreme conditions. These include industries like aerospace, military, automotive, and manufacturing, where the disc's ability to withstand high temperatures and pressures is crucial. The tungsten alloy disc often has a smooth, polished surface and can be machined to precise dimensions. It is valued for its strength, heavy weight, and versatility in applications such as radiation shielding, counterweights, ballast, and tooling components. The material's unique properties also make it ideal for applications that involve high-speed rotations, heavy loads, or precision cutting. Features of Tungsten Alloy Discs: High Density: Tungsten alloys are among the heaviest and densest materials available, making these discs ideal for use in applications requiring weight and mass, such as counterweights and radiation shielding. Outstanding Strength and Toughness: Tungsten alloy discs exhibit remarkable tensile strength, making them highly durable and capable of withstanding extreme mechanical stress and high temperatures. Thermal Stability: Tungsten alloys maintain their integrity at elevated temperatures, making these discs ideal for high-temperature environments, such as aerospace and defense applications. Corrosion and Wear Resistance: The material's natural resistance to corrosion and wear ensures longevity and reliability, even in harsh chemical or abrasive environments. Precision and Customization: Tungsten Alloy Discs can be manufactured to meet exacting tolerances, allowing for customized shapes, sizes, and thicknesses to suit a wide range of applications. Applications: Aerospace and Defense: Used in counterweights, radiation shielding, and heavy-duty components. Medical: In radiation therapy equipment for shielding or as part of specialized diagnostic tools. Industrial: As components for machinery requiring high wear resistance, such as in heavy manufacturing or mining. Electronics: For parts that need high density and heat resistance.

Product name: Titanium pipe coil/ titanium coil tube Grade: Gr1, Gr2,Gr3 ,Gr7,Gr9,Gr12 Standard: ASTM B338/ASME B338 Dimention: OD 3-88.9mm*WT0.5-5mm*L Shape: Coiled Tubes, "U" Shape,Or as customer’s drawing Titanium pipes and plates are rapidly gaining popularity in the industry due to their exceptional advantages. Firstly, titanium pipes and plates possess superior strength and durability, making them suitable for use in numerous projects where high-performance abilities are necessary. Additionally, these materials are lightweight, which makes them easy to handle and transport, reducing labor costs considerably. Moreover, titanium pipes and plates exhibit excellent corrosion resistance properties, even in the most corrosive environments. They are suitable for use in seawater applications, chemical processing plants, and other harsh conditions. With minimal maintenance, titanium pipes and plates can last for many years, saving the industry significant costs on replacement and repair. Finally, titanium pipes and plates have high-temperature resistance abilities, which make them ideal for various high-temperature applications, including exhaust systems, heat exchangers, and furnace components. Their high melting point and thermal stability make them a perfect choice for extreme temperatures. In conclusion, titanium pipes and plates offer a range of exceptional benefits such as strength, durability, lightweight, corrosion resistance, and high-temperature resistance, which make them the preferred choice for numerous industrial applications. Product name.:Titanium coil pipe,titanium coil tube,titanium tube coil,titanium coil tubing Type:Seamless, welded Technique: Cold Drawn Material: Titanium Gr1, Gr2,Gr3 ,Gr7,Gr9,Gr12 Standard: ASTM B338/ASME B338 Surface Treatment:Polish Dimention: OD 3-88.9mm*WT0.5-5mm*L Shape and dimension: As per the drawing ;as Per The Clients Usage:Pipeline Transport Section Shape:Round Origin:China Following is the material grade of Titanium Coiled Tubes that we could do: Ti CP - Grade 1 R50250 3.7025 Ti CP - Grade 2 R50400 3.7035 Ti CP - Grade 3 Ti-0.7Pd Grade 7 Ti 3Al2.5V Grade 9 R56320 3.7194 Ti 0.3Mo 0.8Ni Grade 12 Chemical composition N C H Fe O Al V Pd Mo Ni Ti Grade 1 0.03 0.08 0.015 0.20 0.18 / / / / / Bal Grade 2 0.03 0.08 0.015 0.30 0.25 Grade 3 0.05 0.08 0.015 0.30 0.35 Grade 7 0.03 0.08 0.015 0.30 0.25 / / 0.12-0.25 / / Bal Grade 9 0.05 0.08 0.015 0.25 0.12 2.0-3.5 1.5-3.0 Grade 12 0.03 0.08 0.015 0.25 0.15 / / / 0.2-0.4 0.6-0.9 Bal

Product name: Titanium welding pipe for heat exchanger Standard:ASTM B338 Material:Grade 1 Grade 2 titanium Diameter:15mm 19.1mm 25.4mm 33.4mm 38.1mm 45mm etc. Wall thickness:1.0mm / 1.2mm Length:Max 16000mm Surface:Pickling surface/Polished Application:Heat Exchanger, chemical industry etc. Technique:Welded Titanium seamless pipe for heat exchanger Titanium welded tube GR2 has α crystal structure. This alloy is widely used because of its good formability, moderate strength and excellent corrosion resistance. It has excellent corrosion resistance in strong oxidation and photoreduction environments, including chloride. Easy to weld, hot and cold processing and machining. These characteristics make it ideal for a wide range of applications, including Marine and Marine pipelines, reaction vessels and heat exchangers, Marine, automotive parts, medical and sports equipment in the aerospace, petrochemical, oil and gas and Marine industries. GR2 titanium welded pipe is made by crimping titanium or titanium alloy coil or wide plate welding into a tube. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipe is still in the promotion.

Product Name: Titanium Weld Neck Flange Standard: ANSI / ASME B16.5 Material: Gr1 Gr2 Gr5 Gr7 Gr12 Application: Chemical industry Unit Price: $25usd/pc-$85usd/pc Sealing Surface: RF, FF, TG, RJ etc. Size: NPS 1/2 - NPS 3 Pressure: Class 300 Surface: Polished Technique: Forged and CNC Machined Inspection: UT% PT% Certificate: ISO9001, TUV etc. Available Flange types a.Slip On Flange b.Welding Neck Flange c.Threaded Flange(Screwed Flange) d.Plain Flange e.Blind Flange f.Lap Joint Flange g.Wocket Welding Flange h. welded flange i. titanium large-diameter flange Specification Titanium Weld Neck Flange Class 300 Nom. Pipe Size Flange Dia. Flange Thick. Hub Dia. At Base Raised Face Dia. Hub Dia. At Weld Point No. of Holes Dia. Of Bolts Dia. Of Bolt Circle Bore Dia. Length Thru Hub 1/2 3-3/4 9/16 1-1/2 1-3/8 0.84 4 2-5/8 1/2 0.62 2-1/16 3/4 4-5/8 5/8 1-7/8 1-11/16 1.05 4 3-1/4 5/8 0.82 2-1/4 1 4-7/8 11/16 2-1/8 2 1.32 4 3-1/2 5/8 1.05 2-7/16 1-1/4 5-1/4 3/4 2-1/2 2-1/2 1.66 4 3-7/8 5/8 1.38 2-9/16 1-1/2 6-1/8 13/16 2-3/4 2-7/8 1.90 4 4-1/2 3/4 1.61 2-11/16 2 6-1/2 7/8 3-5/16 3-5/8 2.38 8 5 5/8 2.07 2-3/4 2-1/2 7-1/2 1 3-15/16 4-1/8 2.88 8 5-7/8 3/4 2.47 3 3 8-1/4 1-1/8 4-5/8 5 3.50 8 6-5/8 3/4 3.07 3-1/8 Our moulds for flange are very complete, so we can produce flanges in all standards, including EN1092-1, ASME B16.5, DIN and BS etc.

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to provide robust protection for reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and reduce moisture formation. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields deliver superior resistance to pitting, crevice corrosion, and high-temperature oxidation, making them ideal for aggressive and chloride-containing environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting both domestic and international quality standards. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Uses • Protects reheater tubes from erosion, oxidation, and chloride-induced corrosion • Shields R/H tubes in high-velocity flue gas and particle-laden zones • Extends service life of steam system components under aggressive operating conditions • Suitable for utility boilers, WHRBs, HRSGs, and process heaters Features • Excellent corrosion resistance – Performs well in chloride-rich and oxidizing environments • High thermal stability – Maintains mechanical strength at elevated temperatures • Molybdenum alloyed – Enhanced resistance to pitting and crevice corrosion • Precision-engineered fit – Designed to match exact tube curvature for maximum coverage Applications • Power generation boilers – Long-term reheater tube protection in severe conditions • Waste heat recovery systems – Guards against erosion from high-velocity particles • Industrial steam plants – Reliable under variable thermal cycles • Petrochemical and marine-based steam systems – Suitable for saline and chloride-heavy atmospheres Conclusion The SS 316 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers high-performance protection against erosion, oxidation, and corrosive damage in extreme operating environments. Designed for precision fit and durability, these shields reduce maintenance downtime and extend equipment lifespan. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection