Boiler Spare Part Anti-Corrosion Pressure Cover Plate For CFBC Fluidized Bed Boiler Heating Surface Tube Accessories Par The tube shield is a common component of the heating part of tubes. It is usually used in power station boilers. The useful life of tube shield is 3-5years. The tube shield has a variety of material and the selection of the material shall be subject to the original design of the boiler.The tube shield is divided into straight pipe and bend pipe. The main effect of tube shield is to protect the pipe and increase the service life of the pipe. Boiler Tube Shields are designed to eliminate major maintenance and downtime costs from boiler and condenser tube failure.

ladhani metal corporation is supplier and exporter of SUS 321H sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.SUS 321H is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.SUS 321H is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.

ladhani metal corporation is supplier and exporter of SUS 321 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.SUS 321 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.SUS 321 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

ladhani metal corporation is supplier and exporter of AISI 321H sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.AISI 321H is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.AISI 321H is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.

ladhani metal corporation is supplier and exporter of MIL-S-862B 321 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.MIL-S-862B 321 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.MIL-S-862B 321 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

ladhani metal corporation is supplier and exporter of BS 321S20 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.BS 321S20 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.BS 321S20 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

ladhani metal corporation is supplier and exporter of AISI 321 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.AISI 321 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.AISI 321 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.

Ladhani Metal Corporation is a manufacturer and stockist of a wide range of titanium valves, including: Titanium Full Bore and Flanged Valves, Titanium Needle Valves, Titanium Check Valves, Titanium Globe Valves, Titanium Gate Valves, Titanium Y Strainers, and other titanium forged fittings. Titanium valves are available in a variety of material grades, ranging from the most commonly used Grade 2 to alloyed titanium grades such as Gr. 5, Gr. 7, and Gr. 12. Titanium alloys are also known as R50400, R50550, and R56400 in UNS. Titanium valves are designed as per ANSI B16.34. Titanium valves are primarily made from ASTM B381 Grade F2 and F5. We manufacture our ball valves entirely from titanium, including: Titanium Ball Titanium Body Titanium Handle Titanium Fasteners Titanium Flange Ladhani Metal Corporation is a manufacturer, exporter, and supplier of titanium ball valves. Our Titanium Ball Valve Products: 1000 - 6000 PSI Two-Piece Full Bore Ball Valve 1000 - 6000 PSI Three-Piece Full Bore Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve Design Features: Full Bar Machined Construction Valve Design as per ANSI B16.34 2-Piece Body Design, Full Bore Blow-Out-Proof Stem Design Flange Face to Face: ANSI B16.10 Class 150/300 RF Flange Dimension: ANSI B16.5 Class 150/300 End Type: Screwed & Welded End NACE MR0175 is available Ladhani Metal Corporation can also manufacture titanium ball valves in grades such as Titanium Grade 1, Titanium Grade 2, Titanium Grade 5, Titanium Grade 9, Titanium Grade 6, and Titanium Grade 23. Available at the following locations: Coimbatore, Rudrapur, Bhilai, Raigarh, Navi Mumbai, Aluva, Vijayawada, Firozabad, Panna, Panipat, Channapatna, Varanasi, Moradabad, Bareilly, Jamshedpur, Tiruppur, Rajahmundry, Bokaro Steel City, Kolkata, Durgapur, Kharagpur, Hosdurg, Haldia, Indore, Pithampur, Belagavi, Dibrugarh, Palakkad, Delhi, Noida, Kannur, Salem, Sivakasi, Kanpur, Rajkot, Kochi, Peenya, Surat, Rourkela, Visakhapatnam, Angul, Ahmedabad, Gandhinagar, Jamnagar, Vadodara, Bharuch-Ankleshwar, Ludhiana, Pimpri-Chinchwad, Mumbai, Bangalore, Thiruvananthapuram, Thrissur, Gajraula, Unnao, Sri City, Margao, Kunnamkulam, Darjeeling, Nashik, Chennai, Hosur, Haridwar, Faridabad, Mathura, Gurugram, Baddi, Calicut, Pune, Aurangabad, Nagpur, Mirzapur, Perambra, Muzaffarnagar, Meerut, Saharanpur, Bulandshahr, Ichalkaranji, Muvattupuzha, Aligarh, Anjar, Bardoli, Chittaranjan, Hyderabad, Jharia, Morbi, Nepanagar, Kollam, Tiruvalla, Kottayam, Idukki, Alappuzha, Cherthala, Alwaye, Ambattur, Ambarnath, Amritsar, Avadi, Ankleshwar, Bhadravati, Cochin, Dindigul, Ennore, Guntur, Kagithapuram, Kalpakkam, Kollegal, Kolar, Lucknow, Mysore, Nandambakkam, Nangal, Neyveli, Ooty, Perambur, Pinjore, Rupnarayanpur, Renukoot We are an exporter to the following countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Democratic Republic of the Congo, Denmark, Saudi Arabia, Mexico, Indonesia, Sudan, Libya, Iran, Mongolia, Peru, Chad, Niger, Angola, Mali, South Africa, Colombia, Ethiopia, Bolivia, Mauritania, Egypt, Tanzania, Nigeria, Venezuela, Namibia, Mozambique, Pakistan, Turkey, Chile, Zambia, Myanmar, Afghanistan, South Sudan, France, Somalia, Central African Republic, Ukraine, Madagascar, Botswana, Kenya, Yemen, Thailand, Spain, Turkmenistan, Cameroon, Papua New Guinea, Sweden, Uzbekistan, Morocco, Iraq, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Côte d'Ivoire, Poland, Oman, Italy, Philippines, E New Zealand, Gabon, United Kingdom, Guinea, Uganda, Ghana, Romania, Laos, Guyana, Syria, Cambodia, Uruguay.

Ladhani Metal Corporation is a manufacturer and stockist of a wide range of titanium valves, including: Titanium Full Bore and Flanged Valves, Titanium Needle Valves, Titanium Check Valves, Titanium Globe Valves, Titanium Gate Valves, Titanium Y Strainers, and other titanium forged fittings. Titanium valves are available in a variety of material grades, ranging from the most commonly used Grade 2 to alloyed titanium grades such as Gr. 5, Gr. 7, and Gr. 12. Titanium alloys are also known as R50400, R50550, and R56400 in UNS. Titanium valves are designed as per ANSI B16.34. Titanium valves are primarily made from ASTM B381 Grade F2 and F5. We manufacture our ball valves entirely from titanium, including: Titanium Ball Titanium Body Titanium Handle Titanium Fasteners Titanium Flange Ladhani Metal Corporation is a manufacturer, exporter, and supplier of titanium ball valves. Our Titanium Ball Valve Products: 1000 - 6000 PSI Two-Piece Full Bore Ball Valve 1000 - 6000 PSI Three-Piece Full Bore Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve Design Features: Full Bar Machined Construction Valve Design as per ANSI B16.34 2-Piece Body Design, Full Bore Blow-Out-Proof Stem Design Flange Face to Face: ANSI B16.10 Class 150/300 RF Flange Dimension: ANSI B16.5 Class 150/300 End Type: Screwed & Welded End NACE MR0175 is available Ladhani Metal Corporation can also manufacture titanium ball valves in grades such as Titanium Grade 1, Titanium Grade 2, Titanium Grade 5, Titanium Grade 9, Titanium Grade 6, and Titanium Grade 23. Available at the following locations: Coimbatore, Rudrapur, Bhilai, Raigarh, Navi Mumbai, Aluva, Vijayawada, Firozabad, Panna, Panipat, Channapatna, Varanasi, Moradabad, Bareilly, Jamshedpur, Tiruppur, Rajahmundry, Bokaro Steel City, Kolkata, Durgapur, Kharagpur, Hosdurg, Haldia, Indore, Pithampur, Belagavi, Dibrugarh, Palakkad, Delhi, Noida, Kannur, Salem, Sivakasi, Kanpur, Rajkot, Kochi, Peenya, Surat, Rourkela, Visakhapatnam, Angul, Ahmedabad, Gandhinagar, Jamnagar, Vadodara, Bharuch-Ankleshwar, Ludhiana, Pimpri-Chinchwad, Mumbai, Bangalore, Thiruvananthapuram, Thrissur, Gajraula, Unnao, Sri City, Margao, Kunnamkulam, Darjeeling, Nashik, Chennai, Hosur, Haridwar, Faridabad, Mathura, Gurugram, Baddi, Calicut, Pune, Aurangabad, Nagpur, Mirzapur, Perambra, Muzaffarnagar, Meerut, Saharanpur, Bulandshahr, Ichalkaranji, Muvattupuzha, Aligarh, Anjar, Bardoli, Chittaranjan, Hyderabad, Jharia, Morbi, Nepanagar, Kollam, Tiruvalla, Kottayam, Idukki, Alappuzha, Cherthala, Alwaye, Ambattur, Ambarnath, Amritsar, Avadi, Ankleshwar, Bhadravati, Cochin, Dindigul, Ennore, Guntur, Kagithapuram, Kalpakkam, Kollegal, Kolar, Lucknow, Mysore, Nandambakkam, Nangal, Neyveli, Ooty, Perambur, Pinjore, Rupnarayanpur, Renukoot We are an exporter to the following countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Democratic Republic of the Congo, Denmark, Saudi Arabia, Mexico, Indonesia, Sudan, Libya, Iran, Mongolia, Peru, Chad, Niger, Angola, Mali, South Africa, Colombia, Ethiopia, Bolivia, Mauritania, Egypt, Tanzania, Nigeria, Venezuela, Namibia, Mozambique, Pakistan, Turkey, Chile, Zambia, Myanmar, Afghanistan, South Sudan, France, Somalia, Central African Republic, Ukraine, Madagascar, Botswana, Kenya, Yemen, Thailand, Spain, Turkmenistan, Cameroon, Papua New Guinea, Sweden, Uzbekistan, Morocco, Iraq, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Côte d'Ivoire, Poland, Oman, Italy, Philippines, E New Zealand, Gabon, United Kingdom, Guinea, Uganda, Ghana, Romania, Laos, Guyana, Syria, Cambodia, Uruguay.