'wastewater systems employed'

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2569 Stainless Steel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-quality stainless steel, designed for reliable performance in high-pressure industrial applications. Built to DIN 2569 standards, these flanges offer superior corrosion resistance, mechanical strength, and thermal stability, making them suitable for use in critical systems across industries such as chemical processing, pharmaceuticals, marine engineering, food and beverage, and water treatment. Ladhani Metal Corporation is a trusted manufacturer and exporter of stainless steel flanges, providing products that meet rigorous international standards. The welding neck design allows for strong, permanent connections, making these flanges particularly valuable in systems requiring high structural integrity and resistance to pressure and temperature fluctuations. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring excellent sealing performance, mechanical reliability, and corrosion resistance in aggressive or demanding environments. Flange Types: • Welding Neck Flanges Ensure high-strength, welded connections ideal for systems with continuous pressure and thermal cycling. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Welding Neck Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and stainless steel grades tailored to customer requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Commonly used in food processing, water treatment, and mild chemical applications due to its excellent corrosion resistance and weldability. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Ideal for corrosive environments such as marine, chemical, and offshore industries due to its enhanced resistance to chlorides and acids. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Suitable for high-temperature applications, including exhaust systems and thermal processing equipment, offering improved resistance to intergranular corrosion. Applications of DIN 2569 Stainless Steel Flanges: • Chemical and Petrochemical Plants: Used in corrosive process environments where stainless steel’s durability is essential. • Marine and Offshore Engineering: Ideal for saltwater exposure and harsh weather conditions. • Pharmaceutical and Food Processing: Used in hygienic systems that require corrosion resistance and easy cleaning. • Water and Wastewater Systems: Employed in potable and industrial water lines, offering rust-free performance. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Superior corrosion resistance and mechanical integrity • Strong welded neck design for permanent, high-pressure connections • Compatible with various sealing surfaces and pipe connections • Available with test certifications, quality documentation, and traceability • Suitable for polishing, pickling, passivation, and custom surface treatments Conclusion: DIN 2569 Stainless Steel Flanges PN 100 from Ladhani Metal Corporation are engineered for high-pressure performance, long-term durability, and structural strength. Designed for a variety of demanding industrial and mechanical applications, these flanges offer reliable service and are available in customizable specifications. For custom sizes, material grades, or technical consultations, contact Ladhani Metal Corporation today

DIN 2568 Stainless Steel Flanges PN 64 are precision-engineered threaded flanges manufactured from high-quality stainless steel, designed for reliable performance in high-pressure industrial applications. Built to DIN 2568 standards, these flanges offer superior corrosion resistance, mechanical strength, and thermal stability, making them suitable for use in critical systems across industries such as chemical processing, pharmaceuticals, marine engineering, food and beverage, and water treatment. Ladhani Metal Corporation is a trusted manufacturer and exporter of stainless steel flanges, providing products that meet rigorous international standards. The threaded design allows for fast, weld-free assembly and disassembly, making these flanges particularly valuable in systems requiring frequent maintenance or installation flexibility. Pressure Rating: • PN 64 (64 bar / 928 psi): Specifically designed for high-pressure systems requiring excellent sealing performance, mechanical reliability, and corrosion resistance in aggressive or demanding environments. Flange Types: • Threaded (Screwed) Flanges Allows convenient assembly and disassembly, ideal for systems requiring regular access. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Threaded Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and stainless steel grades tailored to customer requirements. Stainless Steel Grades and Composition: 1. ASTM A182 F304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Commonly used in food processing, water treatment, and mild chemical applications due to its excellent corrosion resistance and weldability. 2. ASTM A182 F316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Ideal for corrosive environments such as marine, chemical, and offshore industries due to its enhanced resistance to chlorides and acids. 3. ASTM A182 F321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Suitable for high-temperature applications, including exhaust systems and thermal processing equipment, offering improved resistance to intergranular corrosion. Applications of DIN 2568 Stainless Steel Flanges: • Chemical and Petrochemical Plants: Used in corrosive process environments where stainless steel’s durability is essential. • Marine and Offshore Engineering: Ideal for saltwater exposure and harsh weather conditions. • Pharmaceutical and Food Processing: Used in hygienic systems that require corrosion resistance and easy cleaning. • Water and Wastewater Systems: Employed in potable and industrial water lines, offering rust-free performance. • HVAC and Mechanical Systems: Integrated in industrial air, heating, and cooling networks requiring long-lasting service. Key Features: • Manufactured to DIN 2568 standard • Available in PN 64 pressure rating • Superior corrosion resistance and mechanical integrity • Weld-free, threaded design for easy installation and disassembly • Compatible with various sealing surfaces and pipe connections • Available with test certifications, quality documentation, and traceability • Suitable for polishing, pickling, passivation, and custom surface treatments Conclusion: DIN 2568 Stainless Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high-pressure performance, long-term durability, and ease of installation. Designed for a variety of demanding industrial and mechanical applications, these flanges offer reliable service and are available in customizable specifications. For custom sizes, material grades, or technical consultations, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a reliable manufacturer and supplier of DIN 2561 carbon steel flanges, built to deliver strength, durability, and cost-effectiveness in low-pressure piping systems. Produced in compliance with the DIN 2561 standard, these flanges are offered in pressure ratings such as PN6, PN10, PN16, PN25, and PN40, tailored to meet varied industrial requirements. Carbon steel flanges are widely used in applications where high mechanical strength is needed and corrosion resistance is less critical. They are commonly found in oil and gas, petrochemical, power plants, and general engineering industries. Flange Types: Weld neck flanges: Ideal for high-pressure, high-temperature environments requiring a strong connection. Raised face (RF): Designed for better gasket sealing to prevent leakage under pressure. Flat face (FF): Suitable for systems using brittle or non-metallic gasket materials. Common Grades, Chemical Composition, and Applications: ASTM A105 (Forged Carbon Steel) Chemical Composition: Carbon (C): 0.35% max Manganese (Mn): 0.60–1.05% Phosphorus (P): 0.035% max Sulfur (S): 0.040% max Silicon (Si): 0.10–0.35% Applications: Widely used in pressure systems at ambient and high temperatures, such as valves, fittings, and flanges in oil & gas pipelines and refineries. ASTM A350 LF2 (Low-Temperature Carbon Steel) Chemical Composition: Carbon (C): ≤ 0.30% Manganese (Mn): 0.60–1.35% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Silicon (Si): 0.15–0.30% Applications: Used in low-temperature service applications such as cryogenic piping, pressure vessels, and heat exchangers. Key Features: Manufactured according to DIN 2561 specifications. High mechanical strength and load-bearing capacity. Cost-effective solution for general-purpose industrial piping. Available in various face types, sizes, and drilling patterns. Applications: Oil & Gas Pipelines: Ideal for upstream, midstream, and downstream operations where high strength is essential. Petrochemical Industry: Used in process lines, utility systems, and structural pipework exposed to high temperatures and pressure. Power Plants: Suitable for use in high-temperature steam and water pipelines in thermal and nuclear power plants. Water Treatment & Distribution: Commonly used in municipal water supply and wastewater systems due to their strength and cost-efficiency. Construction & Engineering: Employed in structural supports, machinery, and piping frameworks where mechanical integrity is crucial. Conclusion: DIN 2561 carbon steel flanges from Ladhani Metal Corporation offer a strong, economical solution for a wide range of industrial piping systems. With availability in trusted grades like ASTM A105 and A350 LF2, these flanges meet international standards for strength and reliability. Backed by precise manufacturing and rigorous quality checks, our carbon steel flanges ensure dependable performance across industries. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

DIN 2545 is a German standard for stainless steel flanges, designed for use in piping systems requiring durability, corrosion resistance, and strong mechanical properties. These flanges are commonly used in industries like chemical, petrochemical, food processing, and more. They come in various sizes and configurations for secure and leak-proof connections. The PN 40 rating indicates that these flanges can withstand pressures up to 40 bar (approximately 580 psi) at normal temperatures (typically 20°C or 68°F). Types of DIN 2545 SS Flanges: · Slip-On Flange (SO): A flange that slides over the pipe and is welded inside and outside for a secure connection. · Weld Neck Flange (WN): A flange with a tapered neck that allows for a stronger weld, commonly used in high-pressure applications. · Blind Flange: A flange with no bore used to seal the end of a pipe or vessel. · Threaded Flange: A flange with internal threads that allows it to be screwed onto a pipe without welding. · Socket Weld Flange: Designed for pipes to fit into the socket of the flange, offering good pressure containment in high-temperature applications. · Lap Joint Flange: Used with a stub end and ideal for applications requiring frequent disassembly. Grades and Their Chemical Composition: · Grade 304 (AISI 304): This grade has a chemical composition consisting of 18-20% chromium, 8-10.5% nickel, with a carbon content of up to 0.08%. It also contains small amounts of manganese (2.00-2.50%), silicon (≤ 1.00%), phosphorus (≤ 0.045%), and sulfur (≤ 0.030%), while the rest is iron. It is widely used due to its good corrosion resistance, weldability, and formability. · Grade 316 (AISI 316): The chemical composition of 316 includes 16-18% chromium, 10-14% nickel, and 2-3% molybdenum. It also contains up to 0.08% carbon, 2.00-2.50% manganese, and ≤ 1.00% silicon, with iron making up the balance. The addition of molybdenum provides improved resistance to corrosion, particularly in chloride environments, making it suitable for marine and chemical industries · Grade 321 (AISI 321): This grade has a chemical composition with 17-19% chromium, 9-12% nickel, and a maximum carbon content of 0.08%. It also contains 2.00-2.50% manganese, ≤ 1.00% silicon, and small amounts of phosphorus (≤ 0.045%) and sulfur (≤ 0.030%). The remainder is iron. Grade 321 is stabilized with titanium to prevent sensitization and is highly resistant to intergranular corrosion, making it ideal for high-temperature applications like in the aerospace and chemical industries. Applications: DIN 2545 Stainless Steel Flanges (PN 40) are widely used in various industries due to their superior strength, corrosion resistance, and versatility. These flanges are specifically designed to handle higher pressure ratings (PN 40), making them ideal for demanding applications. Some of the key applications include: -Chemical Processing: Used in the manufacturing of chemicals, pharmaceuticals, and petrochemicals, where high resistance to corrosion is essential. -Oil and Gas Industry: For pipelines, pumps, and valves that transport oil, gas, and other fluids under high pressure. -Water Treatment Plants: Employed in water and wastewater management systems to connect piping and ensure leak-free connections under high pressure. -Food and Beverage Industry: In production systems where hygiene and corrosion resistance are critical, especially in food processing and dairy plants. -Power Generation: For use in power plants in systems such as steam lines and cooling circuits that operate under high-pressure conditions. -Marine and Offshore: Often used in ships, platforms, and offshore structures that are exposed to harsh environmental conditions. -HVAC Systems: In high-pressure heating, ventilation, and air conditioning applications. DIN 2545 Stainless Steel Flanges (PN 40) offer both durability and reliability in these high-pressure applications, ensuring safe and efficient performance in various industries. Conclusion: DIN 2545 SS flanges provide a reliable and robust solution for piping systems across various industries. These flanges are widely used in applications ranging from general industrial use to highly specialized sectors like aerospace, marine, and chemical processing, ensuring safe and efficient operation in demanding environments. The PN 40 rating guarantees they can withstand medium-to-high pressure systems.

Nickel alloys are metals made from combining nickel as the primary element with another material. It merges two materials to deliver more desirable features, such as higher strength or corrosion-resistance. Because of its unique properties, it’s used in a variety of equipment spanning multiple industries. NICKEL ALLOYS (20, 155, 200, 201, 255, 400, 405, 600, 601, 617, 625, 718, X750, 800H, 825, 925, C22, C276, INVAR 36 and more) Common forms include TUBE, PLATE, SHEET, PLATE, ROUND BAR, WIRE, FITTINGS and more What Are Nickel Alloys? Nickel alloy is formed by combining nickel with other metals, commonly titanium, copper, aluminum, iron, and chromium. Approximately 3,000 nickel-based alloys are in use, forming products for numerous industries. Roughly 90% of all new nickel sold every year is used to create alloys. The most popular one is stainless steel, which accounts for approximately two-thirds of new nickel alloys produced. The enhancements this material provides includes: Improved versatilityNickel_Alloy_Sheet Higher toughness Increased corrosion resistance Oxidation resistance Improved strength at higher and lower temperatures Magnetic properties Electronic properties Many nickel-based alloys offer superior performances at temperatures above 1000°C, making them well suited for extremely harsh environments. These offer excellent oxidation resistance at high temperatures while maintaining quality weldability, workability, and ductility. Nickel alloy has a life span between 25 and 35 years on average and can last much longer depending on the application. With its extended service life, this material is more cost effective than other metals. Nickel alloy is recyclable and is among the most recycled materials around the world. Approximately half of the nickel in stainless steel products comes from recycled nickel materials. What Are Nickel Alloys Used For? This material is common in a variety of equipment and items people use each day. Examples include: Cell phones Food preparation equipment Medical equipment Laboratory equipment Transportation Aircraft Pharmaceuticals Building materials Aircraft and power turbines Nuclear power systems Industries That Benefit From Nickel Alloy Industries such as energy, chemical, petrochemical, and power rely on nickel superalloys—those that present superior oxidation resistance and high-temperature strength—in critical applications. Alloys of nickel, chromium, and molybdenum provide enhanced corrosion resistance. Superalloys are made by adding balanced amounts of elements, including chromium, aluminum, cobalt, and titanium, to create optimal directionally solidified or single crystal structures, giving the material a strength that exceeds regular steel. These nickel-based alloys are utilized in extremely hot environments such as in gas turbines for power generation and in aircraft. Nickel alloy that includes iron is popular in electronic and specialty engineering. Nickel alloys with copper are used in marine engineering for their corrosion-resistant properties in seawater. Engineering markets accounted for 27% of all end-use nickel applications as of 2015. Wastewater treatment and plumbing systems have increased their use of this type of stainless steel because it provides very low corrosion rates when handling water, even at high flow rates. It also offers incredible strength and ductility as well as easy fabrication, facilitating the use of less costly joining methods when assembling piping.

DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2633 stainless steel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for higher medium-pressure applications up to 16 bar (232 psi), offering durable and secure connections in a wide range of industrial pipeline systems. Made from high-quality stainless steel grades such as 304, 316, and 321, they offer superior corrosion resistance, mechanical strength, and long-term performance under more demanding operating and environmental conditions. Ladhani Metal Corporation is a leading global manufacturer and supplier of stainless steel flanges, known for consistent product quality, technical precision, and adherence to international standards. Each flange undergoes rigorous inspection to ensure compliance with industry norms and safety guidelines. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium to high-pressure pipeline systems requiring enhanced joint strength and corrosion protection. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that facilitates proper pipe alignment and reduces stress concentration at the flange base. This ensures smooth flow transitions and minimizes turbulence. • Flat Face (FF) Flanges Flat face configuration promotes uniform gasket compression, making it ideal for systems using soft gasket materials or mating with cast components. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems including potable water, food-grade processing lines, and moderate chemical environments. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for more aggressive environments including chemical processing, marine systems, and equipment exposed to chlorinated solutions or cleaning agents. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Preferred in applications involving elevated temperatures and moderate corrosion exposure, such as exhaust systems, heat exchangers, and food-grade thermal equipment. Applications of DIN 2633 Stainless Steel Flanges PN 16: • Industrial Water Systems Used in pressurized water delivery and treatment systems requiring increased pressure tolerance. • Chemical and Petrochemical Plants Suitable for pipelines transporting reactive or mildly corrosive chemicals. • Marine and Offshore Applications Resistant to saltwater corrosion and pressure variations in marine environments. • Food and Beverage Processing Employed in sanitary and hygienic systems requiring strong, corrosion-resistant joints. • HVAC Systems Used in high-pressure duct and pipe connections for heating, ventilation, and cooling systems. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for enhanced medium-pressure service • Weld neck design supports secure, vibration-resistant connections • Offered in stainless steel grades 304, 304L, 316, 316L, and 321 • High resistance to chemical and environmental corrosion • Long-lasting performance under mechanical stress and thermal cycles • Custom dimensions, materials, and finishes available upon request Conclusion: DIN 2633 Stainless Steel Flanges PN 16 from Ladhani Metal Corporation are built for reliability in demanding industrial settings that require higher pressure tolerance and superior corrosion resistance. These weld neck flanges, made from premium stainless steel, are ideal for applications across water treatment, chemical processing, marine installations, and food-grade systems. For custom configurations, technical consultations, or detailed pricing, contact Ladhani Metal Corporation today.