Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchange surfaces such as boiler tubes, superheaters, and economizer coils from erosion, scaling, impact from ash particles, and flue gas corrosion. These shields are commonly applied in power plants, waste heat recovery boilers, and industrial heating systems to increase the service life of tubes and improve overall system reliability. Their semi-cylindrical shape ensures a snug fit over tube surfaces, especially in zones exposed to high-velocity gas flow or particulate matter. SS 410 Half Round Tube Shield for LTSH Tube The SS 410 Half Round Tube Shield is manufactured from martensitic stainless steel grade 410. This material offers high mechanical strength, moderate corrosion resistance, and excellent resistance to wear and oxidation in mildly corrosive and thermal environments. Specifically developed for Low Temperature Superheater (LTSH) applications, the SS 410 shield provides effective surface protection against soot, fly ash, and erosive gas streams where thermal and mechanical stresses are present. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Tube Shields for LTSH applications, offering durable, cost-effective protection in thermal and industrial systems. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for low-temperature superheater zones exposed to fly ash erosion, oxidation, mechanical abrasion, and light corrosion. Uses • Installed on LTSH tube surfaces in power boilers to protect against particulate erosion and flue gas impact • Shields return bends and convection coils in HRSGs and WHRBs exposed to fluctuating gas temperatures • Used in process boilers and steam generators handling slightly corrosive or abrasive flue gases • Effective for dry ash and solid particulate protection in coal and biomass-fired units • Ideal for applications where wear resistance and moderate corrosion protection are critical Features • High mechanical strength – Withstands erosion, abrasion, and mechanical stress in high-flow zones • Moderate corrosion and oxidation resistance – Suitable for dry and mildly corrosive flue gas streams • Custom-fit – Fabricated to match the diameter, curvature, and layout of LTSH tubes • Easy installation – Compatible with weld-on, clamp-on, or banding installation methods • Cost-effective protection – Durable performance at an economical price point • Available in multiple lengths, thicknesses, and tube radii as per application needs Applications • thermal power plants – Protects LTSH tubes from fly ash impact and erosion in dry flue gas paths • waste heat recovery boilers – Applied in low-temperature return sections vulnerable to mechanical wear • steam generation systems – Shields superheater tubes operating in abrasive flue gas conditions • coal-fired boilers – Guards against slag and ash erosion in lower convection zones • process and utility boilers – Extends tube life in units operating with solid fuel combustion Conclusion The SS 410 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable, abrasion-resistant protection for superheater and boiler tubes in low-temperature flue gas environments. With its excellent wear resistance and mechanical durability, it is a practical choice for enhancing system performance and reducing downtime in power and industrial boilers. For custom sizing, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation manufactures high-quality Copper Alloy Cotter Pins in compliance with the ISO 1234 standard, ensuring optimal performance and durability in a wide range of applications. These Cotter pins are precision-engineered to meet the demanding needs of industries such as automotive, aerospace, marine, and heavy machinery, providing a secure fastening solution for components that require a reliable, vibration-resistant fastener. Key Features: Material: Made from premium copper alloy, these Cotter pins offer excellent corrosion resistance, particularly in environments where moisture, salt, or other corrosive elements are prevalent. The copper alloy used ensures enhanced durability and longevity, making them ideal for harsh conditions. ISO 1234 Standard Compliance: Ladhani Metal Corporation's copper alloy Cotter pins are manufactured according to the strict requirements of ISO 1234, which defines the material properties, dimensions, and performance criteria for Cotter pins. This guarantees that the pins meet international standards for quality and functionality. Dimensions and Tolerances: The Cotter pins are available in various sizes, with a precise tolerance for diameter and length, ensuring a secure and exact fit into corresponding holes. These pins are carefully crafted to ensure smooth insertion and effective locking, even under high-pressure or dynamic conditions. Cotter Design: Featuring a unique Cotter design, the pin consists of two prongs that can be bent outward once inserted through a hole, forming a secure, mechanical lock. This prevents any movement or loosening, even in high-vibration environments, making them an essential component for assemblies where stability is crucial. Corrosion Resistance: Copper alloys are renowned for their natural resistance to corrosion, especially in marine, aerospace, and chemical processing environments. These Cotter pins remain reliable and effective over time, even in the harshest conditions, helping to reduce maintenance needs and downtime. Strength and Durability: The copper alloy provides exceptional strength, ensuring the Cotter pins perform well under mechanical stress without bending or breaking. The pins offer resistance to fatigue and wear, maintaining their locking integrity throughout the life cycle of the assembly. Applications: Copper alloy Cotter pins from Ladhani Metal Corporation are used in a variety of industries: Automotive: Securely fastening components like axles, wheels, and shafts. Aerospace: For locking parts and components in aircraft systems where strength and lightweight properties are essential. Marine: Resistant to saltwater corrosion, these pins are ideal for use in marine equipment and vessels. Heavy Machinery and Engineering: Used in construction and industrial machinery to hold components in place under high load and vibration. Quality Assurance: Ladhani Metal Corporation places a strong emphasis on quality control. Each batch of copper alloy Cotter pins undergoes rigorous testing for dimensional accuracy, tensile strength, corrosion resistance, and overall performance to ensure they meet the ISO 1234 standards. This commitment to quality ensures that customers receive a dependable and long-lasting product for their fastening needs. Conclusion: Ladhani Metal Corporation's ISO 1234 Copper Alloy Cotter Pins offer a premium fastening solution for a variety of applications that demand high strength, corrosion resistance, and reliability. With adherence to international standards, these Cotter pins provide secure, long-lasting performance in even the most challenging environments, making them a trusted choice for industries worldwide.

Ladhani Metal Corporation presents high-quality ISO 1234 Copper-Zinc Alloy Cotter Pins designed for a wide range of industrial applications requiring secure fastening solutions. Manufactured to the precise standards of ISO 1234, these Cotter pins are crafted from a durable Copper-Zinc alloy (brass) to ensure excellent corrosion resistance, superior strength, and long-lasting performance. Applications: ISO 1234 Copper-Zinc Alloy Cotter Pins are widely used across various industries for securing components and ensuring that fastenings do not loosen or separate. Common applications include: Automotive Industry: Used in car engines, wheels, suspension systems, and other mechanical assemblies to hold parts together. Aerospace: In aircraft systems where reliability and safety are paramount, ensuring critical components are securely fastened. Heavy Machinery and Construction: Essential for equipment like cranes, bulldozers, and other industrial machinery, where secure and reliable connections are vital for safety. Marine: Ideal for use in boats and marine equipment, where resistance to saltwater corrosion is crucial. Electrical and Electronics: Used in various electrical systems, where non-magnetic and corrosion-resistant properties are required. General Manufacturing: Suitable for use in general fastening applications, including mechanical assemblies, pipe fittings, and agricultural machinery. Benefits of ISO 1234 Copper-Zinc Alloy Cotter Pins: Secure and Reliable: The Cotter pin design provides a tight and secure fit, preventing accidental loosening under vibrations or external forces. Ease of Use: Simple to install by hand without the need for special tools or equipment, making maintenance or assembly operations quicker and more cost-effective. Cost-Effective: Offering a highly reliable fastening solution at a competitive price, Cotter pins from Ladhani Metal Corporation provide excellent value for money. Long-Term Performance: Brass's ability to withstand wear, oxidation, and corrosion ensures the pins remain effective throughout their service life with minimal maintenance. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Ladhani Metal Corporation is a manufacturer and stockist of a wide range of titanium valves, including: Titanium Full Bore and Flanged Valves, Titanium Needle Valves, Titanium Check Valves, Titanium Globe Valves, Titanium Gate Valves, Titanium Y Strainers, and other titanium forged fittings. Titanium valves are available in a variety of material grades, ranging from the most commonly used Grade 2 to alloyed titanium grades such as Gr. 5, Gr. 7, and Gr. 12. Titanium alloys are also known as R50400, R50550, and R56400 in UNS. Titanium valves are designed as per ANSI B16.34. Titanium valves are primarily made from ASTM B381 Grade F2 and F5. We manufacture our ball valves entirely from titanium, including: Titanium Ball Titanium Body Titanium Handle Titanium Fasteners Titanium Flange Ladhani Metal Corporation is a manufacturer, exporter, and supplier of titanium ball valves. Our Titanium Ball Valve Products: 1000 - 6000 PSI Two-Piece Full Bore Ball Valve 1000 - 6000 PSI Three-Piece Full Bore Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve Design Features: Full Bar Machined Construction Valve Design as per ANSI B16.34 2-Piece Body Design, Full Bore Blow-Out-Proof Stem Design Flange Face to Face: ANSI B16.10 Class 150/300 RF Flange Dimension: ANSI B16.5 Class 150/300 End Type: Screwed & Welded End NACE MR0175 is available Ladhani Metal Corporation can also manufacture titanium ball valves in grades such as Titanium Grade 1, Titanium Grade 2, Titanium Grade 5, Titanium Grade 9, Titanium Grade 6, and Titanium Grade 23. Available at the following locations: Coimbatore, Rudrapur, Bhilai, Raigarh, Navi Mumbai, Aluva, Vijayawada, Firozabad, Panna, Panipat, Channapatna, Varanasi, Moradabad, Bareilly, Jamshedpur, Tiruppur, Rajahmundry, Bokaro Steel City, Kolkata, Durgapur, Kharagpur, Hosdurg, Haldia, Indore, Pithampur, Belagavi, Dibrugarh, Palakkad, Delhi, Noida, Kannur, Salem, Sivakasi, Kanpur, Rajkot, Kochi, Peenya, Surat, Rourkela, Visakhapatnam, Angul, Ahmedabad, Gandhinagar, Jamnagar, Vadodara, Bharuch-Ankleshwar, Ludhiana, Pimpri-Chinchwad, Mumbai, Bangalore, Thiruvananthapuram, Thrissur, Gajraula, Unnao, Sri City, Margao, Kunnamkulam, Darjeeling, Nashik, Chennai, Hosur, Haridwar, Faridabad, Mathura, Gurugram, Baddi, Calicut, Pune, Aurangabad, Nagpur, Mirzapur, Perambra, Muzaffarnagar, Meerut, Saharanpur, Bulandshahr, Ichalkaranji, Muvattupuzha, Aligarh, Anjar, Bardoli, Chittaranjan, Hyderabad, Jharia, Morbi, Nepanagar, Kollam, Tiruvalla, Kottayam, Idukki, Alappuzha, Cherthala, Alwaye, Ambattur, Ambarnath, Amritsar, Avadi, Ankleshwar, Bhadravati, Cochin, Dindigul, Ennore, Guntur, Kagithapuram, Kalpakkam, Kollegal, Kolar, Lucknow, Mysore, Nandambakkam, Nangal, Neyveli, Ooty, Perambur, Pinjore, Rupnarayanpur, Renukoot We are an exporter to the following countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Democratic Republic of the Congo, Denmark, Saudi Arabia, Mexico, Indonesia, Sudan, Libya, Iran, Mongolia, Peru, Chad, Niger, Angola, Mali, South Africa, Colombia, Ethiopia, Bolivia, Mauritania, Egypt, Tanzania, Nigeria, Venezuela, Namibia, Mozambique, Pakistan, Turkey, Chile, Zambia, Myanmar, Afghanistan, South Sudan, France, Somalia, Central African Republic, Ukraine, Madagascar, Botswana, Kenya, Yemen, Thailand, Spain, Turkmenistan, Cameroon, Papua New Guinea, Sweden, Uzbekistan, Morocco, Iraq, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Côte d'Ivoire, Poland, Oman, Italy, Philippines, E New Zealand, Gabon, United Kingdom, Guinea, Uganda, Ghana, Romania, Laos, Guyana, Syria, Cambodia, Uruguay.

Ladhani Metal Corporation is a manufacturer and stockist of a wide range of titanium valves, including: Titanium Full Bore and Flanged Valves, Titanium Needle Valves, Titanium Check Valves, Titanium Globe Valves, Titanium Gate Valves, Titanium Y Strainers, and other titanium forged fittings. Titanium valves are available in a variety of material grades, ranging from the most commonly used Grade 2 to alloyed titanium grades such as Gr. 5, Gr. 7, and Gr. 12. Titanium alloys are also known as R50400, R50550, and R56400 in UNS. Titanium valves are designed as per ANSI B16.34. Titanium valves are primarily made from ASTM B381 Grade F2 and F5. We manufacture our ball valves entirely from titanium, including: Titanium Ball Titanium Body Titanium Handle Titanium Fasteners Titanium Flange Ladhani Metal Corporation is a manufacturer, exporter, and supplier of titanium ball valves. Our Titanium Ball Valve Products: 1000 - 6000 PSI Two-Piece Full Bore Ball Valve 1000 - 6000 PSI Three-Piece Full Bore Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve Design Features: Full Bar Machined Construction Valve Design as per ANSI B16.34 2-Piece Body Design, Full Bore Blow-Out-Proof Stem Design Flange Face to Face: ANSI B16.10 Class 150/300 RF Flange Dimension: ANSI B16.5 Class 150/300 End Type: Screwed & Welded End NACE MR0175 is available Ladhani Metal Corporation can also manufacture titanium ball valves in grades such as Titanium Grade 1, Titanium Grade 2, Titanium Grade 5, Titanium Grade 9, Titanium Grade 6, and Titanium Grade 23. Available at the following locations: Coimbatore, Rudrapur, Bhilai, Raigarh, Navi Mumbai, Aluva, Vijayawada, Firozabad, Panna, Panipat, Channapatna, Varanasi, Moradabad, Bareilly, Jamshedpur, Tiruppur, Rajahmundry, Bokaro Steel City, Kolkata, Durgapur, Kharagpur, Hosdurg, Haldia, Indore, Pithampur, Belagavi, Dibrugarh, Palakkad, Delhi, Noida, Kannur, Salem, Sivakasi, Kanpur, Rajkot, Kochi, Peenya, Surat, Rourkela, Visakhapatnam, Angul, Ahmedabad, Gandhinagar, Jamnagar, Vadodara, Bharuch-Ankleshwar, Ludhiana, Pimpri-Chinchwad, Mumbai, Bangalore, Thiruvananthapuram, Thrissur, Gajraula, Unnao, Sri City, Margao, Kunnamkulam, Darjeeling, Nashik, Chennai, Hosur, Haridwar, Faridabad, Mathura, Gurugram, Baddi, Calicut, Pune, Aurangabad, Nagpur, Mirzapur, Perambra, Muzaffarnagar, Meerut, Saharanpur, Bulandshahr, Ichalkaranji, Muvattupuzha, Aligarh, Anjar, Bardoli, Chittaranjan, Hyderabad, Jharia, Morbi, Nepanagar, Kollam, Tiruvalla, Kottayam, Idukki, Alappuzha, Cherthala, Alwaye, Ambattur, Ambarnath, Amritsar, Avadi, Ankleshwar, Bhadravati, Cochin, Dindigul, Ennore, Guntur, Kagithapuram, Kalpakkam, Kollegal, Kolar, Lucknow, Mysore, Nandambakkam, Nangal, Neyveli, Ooty, Perambur, Pinjore, Rupnarayanpur, Renukoot We are an exporter to the following countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Democratic Republic of the Congo, Denmark, Saudi Arabia, Mexico, Indonesia, Sudan, Libya, Iran, Mongolia, Peru, Chad, Niger, Angola, Mali, South Africa, Colombia, Ethiopia, Bolivia, Mauritania, Egypt, Tanzania, Nigeria, Venezuela, Namibia, Mozambique, Pakistan, Turkey, Chile, Zambia, Myanmar, Afghanistan, South Sudan, France, Somalia, Central African Republic, Ukraine, Madagascar, Botswana, Kenya, Yemen, Thailand, Spain, Turkmenistan, Cameroon, Papua New Guinea, Sweden, Uzbekistan, Morocco, Iraq, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Côte d'Ivoire, Poland, Oman, Italy, Philippines, E New Zealand, Gabon, United Kingdom, Guinea, Uganda, Ghana, Romania, Laos, Guyana, Syria, Cambodia, Uruguay.

Ladhani Metal Corporation manufactures high-quality Copper Alloy Split Pins in compliance with the ISO 1234 standard, ensuring optimal performance and durability in a wide range of applications. These split pins are precision-engineered to meet the demanding needs of industries such as automotive, aerospace, marine, and heavy machinery, providing a secure fastening solution for components that require a reliable, vibration-resistant fastener. Key Features: Material: Made from premium copper alloy, these split pins offer excellent corrosion resistance, particularly in environments where moisture, salt, or other corrosive elements are prevalent. The copper alloy used ensures enhanced durability and longevity, making them ideal for harsh conditions. Dimensions and Tolerances: The split pins are available in various sizes, with a precise tolerance for diameter and length, ensuring a secure and exact fit into corresponding holes. These pins are carefully crafted to ensure smooth insertion and effective locking, even under high-pressure or dynamic conditions. Split Design: Featuring a unique split design, the pin consists of two prongs that can be bent outward once inserted through a hole, forming a secure, mechanical lock. This prevents any movement or loosening, even in high-vibration environments, making them an essential component for assemblies where stability is crucial. Corrosion Resistance: Copper alloys are renowned for their natural resistance to corrosion, especially in marine, aerospace, and chemical processing environments. These split pins remain reliable and effective over time, even in the harshest conditions, helping to reduce maintenance needs and downtime. Strength and Durability: The copper alloy provides exceptional strength, ensuring the split pins perform well under mechanical stress without bending or breaking. The pins offer resistance to fatigue and wear, maintaining their locking integrity throughout the life cycle of the assembly. Applications: Copper alloy split pins from Ladhani Metal Corporation are used in a variety of industries: Automotive: Securely fastening components like axles, wheels, and shafts. Aerospace: For locking parts and components in aircraft systems where strength and lightweight properties are essential. Marine: Resistant to saltwater corrosion, these pins are ideal for use in marine equipment and vessels. Heavy Machinery and Engineering: Used in construction and industrial machinery to hold components in place under high load and vibration. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Ladhani Metal Corporation presents high-quality ISO 1234 Copper-Zinc Alloy Split Pins designed for a wide range of industrial applications requiring secure fastening solutions. Manufactured to the precise standards of ISO 1234, these split pins are crafted from a durable Copper-Zinc alloy (brass) to ensure excellent corrosion resistance, superior strength, and long-lasting performance. Applications: ISO 1234 Copper-Zinc Alloy Split Pins are widely used across various industries for securing components and ensuring that fastenings do not loosen or separate. Common applications include: Automotive Industry: Used in car engines, wheels, suspension systems, and other mechanical assemblies to hold parts together. Aerospace: In aircraft systems where reliability and safety are paramount, ensuring critical components are securely fastened. Heavy Machinery and Construction: Essential for equipment like cranes, bulldozers, and other industrial machinery, where secure and reliable connections are vital for safety. Marine: Ideal for use in boats and marine equipment, where resistance to saltwater corrosion is crucial. Electrical and Electronics: Used in various electrical systems, where non-magnetic and corrosion-resistant properties are required. General Manufacturing: Suitable for use in general fastening applications, including mechanical assemblies, pipe fittings, and agricultural machinery. Benefits of ISO 1234 Copper-Zinc Alloy Split Pins: Secure and Reliable: The split pin design provides a tight and secure fit, preventing accidental loosening under vibrations or external forces. Ease of Use: Simple to install by hand without the need for special tools or equipment, making maintenance or assembly operations quicker and more cost-effective. Cost-Effective: Offering a highly reliable fastening solution at a competitive price, split pins from Ladhani Metal Corporation provide excellent value for money. Long-Term Performance: Brass's ability to withstand wear, oxidation, and corrosion ensures the pins remain effective throughout their service life with minimal maintenance. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Product Name:Titanium wire Standard: ASMT B863,AWS A5.16 Material: Gr1, Gr2 ,Gr3, Gr4,Gr5, Gr7,Gr12 Unit Price: $21.5usd/kg-$60usd/kg Shape: Straight, Spool, Coil Diameter: 0.8mm/1mm/1.2mm/1.6mm/2mm/2.4mm/3mm/3.2mm etc. Surface: Pickling,polishing,sand-blasting Product Name: Titanium wire Standard: ASTM B863 Material: Gr1, Gr2 ,Gr3, Gr4,Gr5, Gr7,Gr12 Shape: Straight, Spool, Coil Diameter: 0.8mm/1mm/1.2mm/1.6mm/2mm/2.4mm/3mm/3.2mm etc. Surface: Pickling,polishing,sand-blasting Titanium wire manufacture is devided into two technique: Cold drawing and hot drawing. Dimension Tolerance of titanium wire: Diameter 0.1-0.3mm 0.3-0.8mm 0.8-2.0mm 2.0-6.0mm Tolerance +/- 0.025 +/-0.04 +/-0.05 +/-0.10 Length 200-500mm 500-1000mm 1000-2000mm &2000mm Tolerance +/-1.0 +/-1.5 +/-2.0 +/-2.5

Product Name: Titanium Plate Standard: ASTM B265 Material: GR1, GR2, Gr3,Gr4 GR5, GR7, GR12,GR23 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting ASTM B265 covers annealed titanium and titanium alloy strips, sheets and plates. ASTM B265 Ti and Ti-based alloy plates are widely used in equipment for high-temperature environment, including aircraft equipment, petroleum and petrochemical, biological materials, marine and chemical industries, such as: blades, storage tanks, targets, pipes and heat exchanger equipment. Product Titanium sheet Standard ASTM B265 Material GR1, GR2, GR3,GR4 GR5, GR7, GR12,GR23 Surface Pickling, Polishing, Sand blasting etc. Application Industry Size The size of standard sheet is usually Thickness × Width 1000mm × Length 2000mm. We can also cut it as you require. Type Sheet, plate, foil; Straight & roll Certificate Certificate of Origin, Material Test Certificate as per EN10204.3.1 and 10204.3.2 are all available