'titanium dished head standard'

Product name:Titanium Hemispherical Dish Head Standard: ASME VIII-I, DIN28013 Material: Titanium GR1, GR2 Size: Customized Titanium Hemispherical Dish Head Material: titanium, titanium alloy Outer diameter: dn15-dn1200 Wall thickness: sch5-sch160. Standard: ASME DIN JIS BS Scope of application: petrochemical industry, nuclear power, machinery, medical equipment, chemical fertilizer, shipbuilding, waterproof treatment, pipeline, etc Purpose: pipe fittings welded on the pipe end or installed on the external thread of the pipe end to cover and block the pipe. It is used to close the pipeline and has the same function as the pipe plug. The pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cover and tightening mouth. The most common types of spherical head: Pan head This is a spherical head. The radius of the plate is equal to the diameter of the cylinder to which it is attached. The radius of the knuckle is equal to one tenth of the diameter of the cylinder. Ellipsoidal head This is a semicircular head, also known as a semicircular ellipsoid head. The radius of the disk is 90.45% of the diameter of the cylinder (ICR=0.9045 x od). The radius of the steering knuckle is (IKR=0.1729 x od).

Product Name: Titanium Anode Basket Material: Gr1, Gr2 Size: Customized Application: Anodizing Electroplating Plating Shape: Rectangular, round and spiral etc. Product Information Titanium basket has high strength, light weight, corrosion resistance and has a layer of oxide film on the surface. This film can prevent the current from passing through the titanium basket under normal electroplating conditions and make the current flow directly to the anode material in the titanium basket. There are various types of titanium baskets, including round, rectangular, and dish-shaped etc. It can also be specially designed according to the requirements of customers

Product name:Gr7 Titanium dished Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Gr7 Titanium Hemispherical Head Dish-shaped head refers to the head composed of three parts: partial spherical shell, circular arc prayer side and good side (cylinder short treatment). Due to the abrupt change of radius of curvature at the junction between spherical shell and flanged edge, flanged edge and straight edge, the edge stress is much larger than the film stress caused by inner ash, and its mechanical properties are worse than that of spherical and elliptic head. Because of the shallow disc head, the requirements of stamping equipment and mold are low, so it is more convenient to manufacture. Rarely used in force vessels, only where pressure is low and a reduced head depth is required or where a die is lacking. The disc-shaped head is a continuous surface. The radius of curvature of the warp has a sudden change at the junction of three parts. As the curvature changes, there is bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from the other parts. Compared with the oval head, the stress distribution is not as uniform, but the machining is easier, so it is not ideal in engineering use. But when the mold processing of oval head is difficult, disc head is used instead. Size range: 50mm-10000mm with integral formed,larger sizes with subsection formed can be specified. Standard: ANSI, ASME ,MSS, API, DIN, JIS, BS,AWWA Thickness: 2mm-300mm Material: Titanium, titanium alloy Material grade:Grade 7 Application: mainly for pressure vessels and boilers in diverse industry such as oil, chemical,winery, pharmaceutical, environmental and military. Grade 7 (Ti-0.2Pd) titanium Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization