Half Round Tube Shield Half Round Tube Shields from Ladhani Metal Corporation are durable, precisely fabricated components used to protect boiler tubes from erosion, scaling, and corrosion caused by flue gas flow and particulate impact. Their half-round, semi-cylindrical structure is designed to conform closely to tube surfaces, especially in areas subjected to repeated thermal cycling or mechanical wear. These shields are extensively applied in boilers, heat exchangers, and waste heat recovery systems. 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube The 1Cr25Ni20Si2 Half Round Tube Shield is manufactured from a high-performance chromium-nickel-silicon alloy designed for elevated-temperature service. With approximately 25% chromium, 20% nickel, and added silicon content, this alloy exhibits superior resistance to oxidation, thermal fatigue, and carburization. Its mechanical stability under high-temperature operation makes it a preferred material for protective applications in Low Temperature Superheater (LTSH) zones. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Tube Shields, offering high-performance shielding solutions tailored for harsh, heat-intensive industrial environments. Chemical Composition of 1Cr25Ni20Si2 – Chromium-Nickel-Silicon Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.5 – 2.5% • Chromium (Cr): 24.0 – 27.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature steam systems, where resistance to flue gas corrosion, thermal oxidation, and mechanical fatigue is essential. Uses • Protects LTSH tubes in thermal power plants from scaling and soot-induced wear • Shields heat exchanger tubes from low-temperature corrosive gases and ash deposition • Used in boilers and HRSGs exposed to fluctuating temperature and combustion by-products • Suitable for high-wear areas in biomass boilers and incineration systems • Enhances operational life of reheater and superheater coil sections Features • High thermal stability – Withstands temperature fluctuations without structural deformation • Excellent oxidation and carburization resistance – Ideal for extended high-temperature exposure • Custom fit – Designed according to specific tube radii and coil geometries for accurate alignment • Reduced maintenance – Shields tubes from damage, minimizing downtime and repair costs • Versatile installation – Compatible with weld-on, clamp-on, and banding installation techniques • Long service life – Resistant to scaling and degradation in heat-intensive environments Applications • power generation boilers – Provides long-term protection for LTSH coils in flue gas zones • WHRBs and HRSGs – Used in low-temperature convection sections to counteract erosive gas flow • chemical and refining industries – Prevents corrosion in heat exchangers handling acidic media • marine steam systems – Protects low-temperature sections exposed to salt-laden air and gases • waste-to-energy plants – Shields boiler tubing from high-volume particulate streams Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance component designed for superior protection of boiler tubes in corrosive and thermally aggressive environments. It ensures durability, thermal resistance, and long-term reliability in LTSH and similar service applications. For specifications, custom fabrication, or bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect tubes in boilers, heat exchangers, and high-temperature process systems. Designed to reduce tube erosion, oxidation, and thermal fatigue, these shields play a critical role in maintaining the longevity and reliability of industrial equipment in thermally aggressive and corrosive environments. Cr23Ni13 Half Round Tube Shield The Cr23Ni13 Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured from high-alloy stainless steel containing approximately 23% chromium and 13% nickel. This alloy provides excellent resistance to high-temperature oxidation, scaling, and corrosion, particularly in systems operating up to 1000°C. With an austenitic microstructure, Cr23Ni13 exhibits good strength, ductility, and resistance to thermal shock, making it ideal for use in heat-intensive industrial processes. The half-round shape allows for easy installation over existing tubes, creating a strong and secure shield against gas flow, flame impingement, and particulate erosion. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.12% • Silicon (Si): ≤ 1.50% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Uses • Superheater and Reheater Tube Protection – Prevents scaling and oxidation on boiler tubes exposed to high flue gas temperatures in thermal power stations. • Furnace Tube Shielding – Shields radiant and convection tubes from flame impingement, heat distortion, and thermal fatigue in process furnaces. • Heat Exchanger Tubes – Offers external protection against erosion and scaling in petrochemical and refining systems operating with hot gases. • Power and Steam Generation Systems – Used to protect steam tubing from oxidation and surface wear in continuous service at elevated temperatures. • Industrial Kilns and Incinerators – Guards exposed piping in rotary kilns and combustion chambers against corrosive deposits and heat damage. Features • High-Temperature Resistance – Performs reliably in continuous service up to 1000°C, maintaining strength and dimensional stability. • Oxidation and Scaling Protection – Chromium-rich composition creates a protective oxide layer that resists corrosion in oxidizing environments. • Austenitic Microstructure – Provides good mechanical strength, thermal expansion resistance, and excellent ductility under heat cycling. • Precision Half-Round Form – Designed for fast, secure installation over round tubes using welding or clamping techniques. • Durable Construction – Withstands vibration, thermal shock, and erosive gas flow common in industrial boilers and furnaces. • Custom Manufacturing – Offered in various diameters, wall thicknesses, and lengths to match specific application demands. • Optional Finishes – Available in pickled, passivated, or bright annealed surface finishes based on environmental and operational needs. Applications • Thermal and Utility Boilers – Shields superheater and economizer tubes from high-temperature corrosion and ash erosion. • Petrochemical Plants – Used in process heaters and reactors where external tube surfaces are exposed to oxidizing or carburizing atmospheres. • Refineries – Protects tubes in fired heaters and reformers against oxidation and mechanical degradation. • Waste-to-Energy Facilities – Guards boiler tubes from hot flue gas erosion and acidic gas corrosion in incineration systems. • Metallurgical Furnaces – Applied in steel and non-ferrous heat treatment plants to prevent oxidation and scale accumulation. • Cement and Lime Plants – Protects gas ducting and tube banks in preheaters, coolers, and flue recovery systems from abrasive dust and heat exposure. Conclusion The Cr23Ni13 Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for tube protection in high-temperature and oxidizing environments. Its austenitic stainless steel composition ensures superior oxidation resistance, structural integrity, and longevity under continuous thermal stress. Whether used in boilers, furnaces, or reformers, these shields effectively reduce downtime, maintenance costs, and the risk of unexpected tube failures. With flexible customization, quality-controlled fabrication, and proven material performance, Ladhani Metal Corporation remains a trusted supplier of advanced shielding solutions for critical industrial applications. For detailed specifications, customization requests, or to obtain a quote, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are purpose-built components designed to extend the life of boiler, heat exchanger, and process tubes by offering robust protection from erosion, scaling, and thermal impact. These shields are essential for maintaining system performance and reducing unscheduled downtime in industries that operate under demanding thermal and mechanical conditions. SS 420 Half Round Tube Shield The SS 420 Half Round Tube Shield is a semi-cylindrical protector fabricated from martensitic stainless steel grade 420. Known for its high hardness, wear resistance, and moderate corrosion resistance, SS 420 is ideally suited for applications where abrasion and mechanical stress are predominant concerns. The half-round configuration ensures a secure fit over existing tubes, creating a physical barrier against direct exposure to high-velocity gases, fly ash, and thermal shocks. Its ability to retain strength at elevated temperatures makes it suitable for use in utility boilers, air preheaters, and other high-wear process systems. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion resistance in flue gas paths, soot blower zones, and areas exposed to particulate erosion in industrial boilers. • Heat Exchanger Shielding – Minimizes mechanical damage caused by turbulent flow and particulate-laden fluids, preserving heat transfer efficiency. • Furnace Tube Guarding – Protects furnace and kiln tubes from thermal scale buildup and flame impingement in harsh operating zones. • Steam and Condensate Systems – Shields tubes from vibration, pressure cycling, and moderate steam-induced corrosion. • Ash and Gas Flow Zones – Ideal for protecting tubes in areas of fly ash impact or high-speed combustion gas flow in WTE and biomass plants. Features • High Surface Hardness – Excellent resistance to surface wear, impact, and mechanical abrasion due to its high carbon and martensitic structure. • Moderate Corrosion Resistance – Withstands oxidizing and mildly corrosive conditions up to 650°C, suitable for moderate industrial atmospheres. • Structural Integrity – Maintains strength under pressure and temperature cycling, offering long service life in mechanical protection roles. • Easy Installation – The half-round design enables fast application in the field with minimal disruption to tube layout or operation. • Finishing Options – Available in bright annealed, pickled, or passivated surfaces depending on operational requirements. • Custom Built – Offered in varied lengths, diameters, thicknesses, and attachment styles (clamp-on or weld-on) to match specific installations. Applications • Thermal and Biomass Power Stations – Used to protect boiler tubes from ash erosion and gas turbulence in high-velocity flue paths. • Cement and Steel Industries – Shields kiln and heat recovery tubes from particulate impact, slag, and high-temperature dust environments. • Waste-to-Energy Plants – Guards tubes in combustion chambers and economizers where gas stream erosion and soot buildup are persistent issues. • Oil Refineries – Applied in heat exchangers and preheater tubes exposed to abrasive flow or moderate corrosion risk. • Pulp and Paper Mills – Used in black liquor recovery boilers and steam generators handling fibrous or corrosive waste products. • Air Preheaters – Ideal for tubes located in dust-laden environments requiring protection against wear and gas abrasion. Conclusion The SS 420 Half Round Tube Shield from Ladhani Metal Corporation offers a high-performance, wear-resistant solution for tube protection in mechanically aggressive and thermally intensive environments. Its martensitic structure provides outstanding surface hardness, making it especially effective in soot blower zones, high-velocity ducts, and areas subject to abrasive particle flow. While not intended for severe chemical environments, SS 420 delivers exceptional value where mechanical durability is the top priority. With full customization options and precision manufacturing, Ladhani Metal Corporation ensures durable, reliable shielding products tailored to your plant’s exact operational needs. For technical consultations, order customization, or to request a quotation, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation offers SS 304L Boiler Half Round Tube Shields designed to protect straight boiler tubes from high-temperature erosion, oxidation, and mechanical impact. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide superior corrosion resistance and improved weldability, making them ideal for applications where tubes are exposed to aggressive gases, thermal cycling, and post-weld environments. SS 304L minimizes the risk of intergranular corrosion and maintains mechanical strength in elevated temperatures. The shield features a precision-formed half-round profile that matches standard tube diameters for secure fitting and optimal protection. It serves as a physical barrier against soot blower blasts, high-velocity gas streams, and abrasive particulate matter, effectively extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses tailored to meet domestic and international boiler protection requirements. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Designed for use in boilers, HRSGs, WHRBs, and industrial heat systems operating in corrosive and high-temperature environments. Uses • Protection of straight tubes in power and process boilers • Installed in radiant and convection zones exposed to flue gas • Shields against erosion from soot blowers and fly ash • Suitable for post-weld environments requiring low carbon stainless steel • Used in chemical, food, and pharmaceutical industries Features • Excellent corrosion resistance – Performs well in oxidizing and corrosive atmospheres • Low carbon content – Prevents carbide precipitation during welding • High thermal stability – Resists deformation under continuous heating • Custom-fit profile – Precisely formed for close contact and effective shielding • Easy installation – Clamping, welding, or banding as required • Export-ready – Manufactured to meet global quality and dimensional standards Applications • Power generation boilers – Protection for superheater and economizer tubes • Chemical and fertilizer plants – Corrosion-resistant shielding in heat zones • Food and dairy processing – Suitable for hygienic and thermally stable conditions • Waste heat recovery systems – Effective in high-temperature gas paths Conclusion The SS 304L Boiler Half Round Tube Shield from Ladhani Metal Corporation offers dependable protection for boiler tubes operating in corrosive, high-temperature environments. With enhanced corrosion resistance, superior weldability, and custom manufacturing options, these shields provide a long-lasting solution for industrial and utility boiler systems. For orders, sizing, or technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers SS 430 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bend and 90-degree curved tubes in boilers, heat exchangers, superheaters, and reheaters. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and thermal stability in moderately aggressive service environments. SS 430 is particularly suitable for applications where resistance to oxidation and surface scaling is needed without exposure to highly corrosive agents. The semi-cylindrical profile is precision-formed to match the outer curvature of return tube bends, offering a physical barrier against soot-blower impact, flue gas erosion, and ash particle wear. SS 430 shields are commonly used in utility and industrial boilers operating under dry, mildly corrosive, and thermally demanding conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Outer Half Round 90 Degree Bend Tube Shields, offering custom configurations to suit specific plant layouts and service requirements. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and general industrial systems requiring protection for tube bends in dry heat and oxidizing environments. Uses • Shielding outer 90-degree bends in superheaters and reheaters • Applied in WHRBs and HRSG return coils exposed to dry flue gas • Protects against moderate erosion and oxidation in utility boilers • Suitable for curved tubes in industrial furnaces and heat recovery units Features • Cost-effective protection – Combines durability with economical material choice • Oxidation resistance – Performs well in clean flue gas and dry heat exposure • Thermal reliability – Withstands repeated heating cycles without deformation • Custom-fit geometry – Formed to match exact bend radius for tight coverage • Versatile installation – Can be clamped, banded, or tack welded as needed • Multiple sizes – Offered in a variety of thicknesses, lengths, and radii Applications • Thermal power stations – Shields steam lines and return bends from surface scaling • Waste heat boilers – Guards tube bends in clean gas recovery systems • Process heaters – Used in less corrosive gas heating environments • Cement and food processing industries – Protects tube curves from oxidation Conclusion The SS 430 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides durable and cost-efficient protection for tube bends exposed to dry heat, oxidation, and moderate wear. With good formability and thermal performance, these shields are ideal for systems where corrosion levels are controlled but mechanical shielding is essential. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler and heat exchanger tubes from erosion, scaling, and thermal fatigue. These shields are especially suited for systems where tubes are exposed to turbulent gas flow, particulate-laden environments, and fluctuating thermal cycles. The semi-cylindrical shape of the shield allows easy installation and reliable surface protection, extending the operational life of the tubes. 1Cr13 Half Round Tube Shield for LTSH Tube The 1Cr13 Half Round Tube Shield is fabricated from martensitic stainless steel containing approximately 13% chromium. Known for its good corrosion resistance, moderate heat resistance, and excellent wear strength, 1Cr13 is suitable for medium-temperature applications, especially in mildly corrosive or oxidizing environments. This makes it an ideal material for shielding LTSH (Low Temperature Superheater) tubes from flue gas erosion and ash abrasion. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr13 Half Round Tube Shields, delivering durable and cost-effective solutions for various thermal power and heat exchanger applications. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and abrasive environments, especially in boiler systems, where mechanical strength and oxidation resistance are required at elevated but controlled temperatures. Uses • Protection of LTSH tubes in thermal power plant boilers • Surface shielding in steam generators and utility boilers • Coverage of superheater coils in flue gas-exposed zones • Suitable for coal-fired and biomass-fired boiler applications • Used in refinery and petrochemical boilers with moderate gas exposure Features • Good corrosion and oxidation resistance – Provides reliable performance in mildly corrosive environments • Wear and erosion resistance – Withstands mechanical wear from ash and soot-laden gas streams • Precise custom fitting – Fabricated to match specific tube diameters and bend radii • Enhanced tube protection – Minimizes wear on LTSH tubes, increasing overall system lifespan • Easy installation – Supports clamp-on, weld-on, and banding installation options • Wide availability – Offered in various lengths, thicknesses, and profiles Applications • power generation – Used in LTSH zones to protect from flue gas erosion and slagging • WHRBs – Shields exposed surfaces of tube bends in waste heat recovery systems • chemical and fertilizer plants – Applied in steam systems requiring moderate temperature durability • cement industry – Suitable for boilers dealing with particulate exhaust gas environments • industrial utility boilers – Enhances tube life in fluctuating thermal load zones Conclusion The 1Cr13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable solution for protecting tube surfaces in moderately corrosive, abrasive, and thermally active environments. Its martensitic stainless composition and mechanical durability make it ideal for power plants and process boilers requiring extended service life with lower maintenance needs. For customized dimensions, technical support, or quotation, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, and mechanical wear in heat transfer systems. These shields are precisely engineered to fit the curvature of boiler tubes, especially in areas exposed to flue gas turbulence and ash impact. The half-round design allows for easy installation and ensures consistent protection throughout the tube's operating life. Cr23Ni13 Half Round Tube Shield for LTSH Tube The Cr23Ni13 Half Round Tube Shield is fabricated using a high-temperature-resistant chromium-nickel alloy containing approximately 23% chromium and 13% nickel. This composition provides excellent resistance to oxidation, thermal shock, and high-temperature corrosion. It is particularly suited for shielding LTSH (Low Temperature Superheater) tubes that operate in areas where flue gases carry abrasive particles, resulting in gradual material degradation over time. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr23Ni13 Half Round Tube Shields, delivering robust and thermally stable components for boiler protection applications in demanding industrial conditions. Chemical Composition of Cr23Ni13 – High Chromium-Nickel Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature zones in boilers and furnaces where oxidation, scaling, and ash corrosion pose operational challenges. Uses • Protects LTSH tubes in coal-fired and biomass-fired boilers • Shields heat exchanger tubes in waste heat recovery units • Provides erosion and oxidation resistance in process heaters and reformers • Installed in utility and industrial boilers to prevent wear from low-temperature flue gases • Suitable for use in marine, chemical, and refining industries where steam purity and thermal efficiency are critical Features • High-temperature resistance – Excellent durability under thermal cycling conditions • Corrosion protection – Chromium-rich alloy protects against oxidizing flue gases • Precision fabrication – Custom-fit designs ensure secure coverage of exposed tube surfaces • Enhanced tube longevity – Reduces surface wear, scaling, and thermal fatigue • Multiple installation methods – Supports weld-on, clamp-on, or banding attachment options • Customizable dimensions – Lengths, thicknesses, and radii can be tailored for system compatibility Applications • thermal power stations – Extends the life of LTSH coil sections in superheaters and economizers • WHRBs – Provides protective coverage for tubes exposed to particulate-laden exhaust gases • process industries – Ideal for exchangers and preheaters in refineries and petrochemical plants • HRSGs – Shields low-temperature superheater zones in combined-cycle power systems • cement and paper plants – Protects heat transfer surfaces from soot and particulate erosion Conclusion The Cr23Ni13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers a reliable and thermally robust solution for protecting superheater and heat exchanger tubes in abrasive and corrosive environments. Its high chromium-nickel composition ensures long-lasting performance in boiler systems where operational efficiency and tube integrity are critical. For orders, technical specifications, or consultation, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler tubes, heat exchanger coils, and superheaters from flue gas erosion, fly ash impact, scaling, and corrosion. These shields are widely used in power plants, industrial boilers, and waste heat recovery units to reduce tube wear, extend service life, and improve operational efficiency. Their half-round, semi-cylindrical design ensures easy installation and a secure fit over curved or straight tubes exposed to abrasive gas flow and thermal cycling. SS 430 Half Round Tube Shield for LTSH Tube The SS 430 Half Round Tube Shield is made from ferritic stainless steel grade 430, which provides good oxidation resistance, moderate corrosion protection, and excellent thermal stability. It is particularly suitable for Low Temperature Superheater (LTSH) applications where boiler tubes operate in moderately corrosive environments and are subject to ash deposition and dry gas erosion. With its high chromium content and low carbon levels, SS 430 offers a cost-effective shielding solution for boiler systems requiring dependable surface protection without the need for high nickel alloys. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 Half Round Tube Shields for LTSH applications, providing durable and economical protection in moderately corrosive and thermally demanding environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Best suited for low-temperature superheater zones and convection areas where oxidation, thermal exposure, and ash erosion are concerns in boiler and steam systems. Uses • Installed on LTSH tubes to prevent scaling, ash abrasion, and flue gas corrosion • Shields tube surfaces in HRSGs, economizers, and convection zones of WHRBs • Used in industrial and utility boilers operating in dry, oxidizing flue gas environments • Suitable for coal, biomass, or oil-fired systems with moderate corrosion potential • Applied where cost-effective surface protection is required without compromising durability Features • Good oxidation resistance – Maintains integrity under sustained thermal exposure • Cost-effective – Offers a lower-cost alternative to austenitic and molybdenum-bearing steels • Custom-fit design – Precision-fabricated to match tube radius, bend geometry, and length • Easy installation – Can be installed using clamp-on, weld-on, or banding techniques • Reduces tube wear – Protects surfaces from erosion, scaling, and soot buildup • Available in multiple dimensions and thicknesses to match application specifications Applications • thermal power plants – Installed on LTSH tube banks for long-term surface protection • waste heat recovery units – Protects return bends and convection tubes from particulate erosion • steam generation systems – Applied to shield tubes in low-temperature flue zones • industrial boilers – Guards against ash impact in biomass or coal-fired heating systems • process boilers – Enhances durability of heat exchange surfaces in oxidizing environments Conclusion The SS 430 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable and cost-efficient protection for superheater and boiler tubes in low-temperature, oxidizing environments. Its thermal stability and erosion resistance make it ideal for power and industrial systems where long-term durability and low maintenance are essential. For detailed specifications, sizing options, or technical consultation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.