Name: SS 304L Sliding Pipe Shoe Clamp
Availability: instock

SS 304L Sliding Pipe Shoe Clamp

Ladhani Metal Corporation offers SS Sliding Pipe Shoe Clamps designed to support pipelines while allowing smooth axial movement caused by thermal expansion and contraction. These clamps feature a sliding base that enables pipes to move freely without inducing stress on the system or damaging the supporting structure. Manufactured from premium stainless steel, our sliding pipe shoe clamps provide excellent durability, corrosion resistance, and long-term performance in critical industrial applications. Function of SS Sliding Pipe Shoe Clamps • Provide stable support while permitting axial sliding movement • Compensate for thermal expansion and contraction in pipelines • Distribute pipe loads evenly to prevent localized stress and wear • Reduce vibration, noise, and fatigue in piping systems • Prevent direct contact with corrosive or abrasive supporting surfaces Ladhani Metal Corporation manufactures, supplies, and exports SS Sliding Pipe Shoe Clamps in a wide range of sizes and finishes, meeting both domestic and international project requirements. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Widely used in industries where pipelines undergo movement due to thermal or dynamic conditions. • Refineries and petrochemical plants • Fertilizer and chemical processing units • Oil and gas transmission pipelines • Power generation plants and boilers • Marine and offshore engineering installations Uses • Provides sliding support for pipelines with thermal movement • Protects pipelines from stress and structural deformation • Enhances operational safety and system efficiency • Maintains insulation and structural integrity of pipelines • Suitable for high-temperature and heavy-duty applications Features • Sliding design for controlled pipeline movement • High load-bearing strength and robust construction • Excellent resistance to corrosion and oxidation • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Sliding Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for pipelines that require support with controlled axial movement. Available in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps ensure strength, durability, and corrosion resistance, making them suitable for diverse industrial pipeline systems. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Send Message

Pipe Shoe Clamp

SS 304 Sliding Pipe Shoe Clamp

Send Message

Pipe Shoe Clamp

SS Sliding Pipe Shoe Clamp

Send Message

Boiler Half Round Tube Shield

1Cr13 Boiler Half Round Tube Shield

Ladhani Metal Corporation offers 1Cr13 Boiler Half Round Tube Shields designed to provide robust protection for boiler and heat exchanger tubes operating in moderate temperature and mildly corrosive environments. Manufactured from martensitic stainless steel with a balanced chromium content, 1Cr13 offers good resistance to oxidation and corrosion, along with high mechanical strength and wear resistance. Its heat-treatable properties ensure excellent hardness and durability, making it suitable for extended service in demanding industrial conditions. They act as a protective layer against soot blower impact, abrasive flue gases, and particulate erosion, helping extend tube life and reduce maintenance frequency. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Boiler Half Round Tube Shields in a variety of sizes, lengths, and thicknesses to meet specific application requirements in both domestic and international markets. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.22% • Manganese (Mn): ≤ 0.60% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 0.60% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Best suited for boiler tubes in environments where moderate oxidation resistance, good mechanical strength, and abrasion resistance are required. Uses • Shields straight boiler tubes in superheater and reheater sections • Protects against soot blower erosion and abrasive flue gas particles • Ideal for medium-temperature service conditions • Extends operational life of boiler tubes in industrial applications Features • Good oxidation and corrosion resistance – Suitable for moderate temperature use • High mechanical strength – Maintains structural integrity under operational stress • Wear resistant – Withstands abrasive and erosive boiler environments • Accurate fitment – Precision half-round design for secure tube coverage • Multiple installation options – Suitable for welding, clamping, or banding • Export ready – Manufactured to international quality specifications Applications • Power generation boilers – Protects superheater and reheater tube sections • Industrial steam boilers – Reduces wear from soot blowing and flue gas flow • Waste heat recovery units – Provides protection in moderate heat zones • Pulp, paper, and textile industries – Ensures tube longevity under abrasive conditions Conclusion The 1Cr13 Boiler Half Round Tube Shield from Ladhani Metal Corporation combines mechanical strength, wear resistance, and moderate oxidation protection for reliable boiler tube safeguarding. Precision-formed for secure installation and manufactured to meet export standards, these shields are an effective solution for extending tube service life in diverse industrial environments. For customized sizing and global supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Send Message

Half Round Straight Tube Shield

SS 310S Half Round Straight Tube Shield

SS 310S Half Round Straight Tube Shield Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310S Half Round Straight Tube Shields designed to protect straight boiler and heat exchanger tubes from high-temperature oxidation, corrosion, and mechanical erosion. SS 310S is a low-carbon version of SS 310, offering enhanced weldability and resistance to sensitization during thermal exposure. These shields are especially suited for harsh environments involving continuous or cyclic high heat, making them ideal for industrial boilers, fired heaters, and heat recovery systems. SS 310S Half Round Straight Tube Shield The SS 310S Half Round Straight Tube Shield is fabricated to tightly fit over straight tube surfaces, offering durable protection in thermal processing units. Its resistance to scaling at temperatures up to 1100°C and excellent mechanical strength under elevated temperatures makes it reliable for shielding heat-affected tubes. With easy installation methods such as tack welding, clamping, or banding, these shields minimize downtime and maintenance in critical operations. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S Half Round Straight Tube Shields, offering custom solutions to meet the demanding conditions of thermal power plants, petrochemical facilities, and steam reformers. Material Grade SS 310S – Austenitic stainless steel with low carbon content and superior heat and oxidation resistance. Chemical Composition of SS 310S • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Recommended for continuous high-temperature service in aggressive gas environments, especially where welding and corrosion resistance are key. Uses • Shielding straight tubes in superheaters, reheaters, and steam coil systems • Protection against flue gas erosion in waste heat boilers • Heat shielding in fired process heaters and refinery furnaces • Lining straight tube segments in chemical and fertilizer heat exchangers • Defending against scaling and surface degradation in steam reformers Features • Low carbon for better weldability – Prevents sensitization and intergranular corrosion • High resistance to scaling – Maintains integrity under continuous exposure to extreme heat • Durable and long-lasting – Withstands mechanical and thermal fatigue • Available in custom sizes – Fabricated to match exact tube diameters and operating conditions • Quick installation – Compatible with standard weld-on, clamp-on, or banded attachment methods • High service life – Reduces tube wear and lowers maintenance frequency Applications • power generation – Installed on straight boiler tubes in areas with high thermal load and flue gas flow • refineries – Protects tubes in process heaters from oxidation and heat-related damage • petrochemical plants – Used in straight sections of heat exchangers and reformer coils • WHRB systems – Improves durability of tubes in gas turbine exhaust recovery units • fertilizer industry – Extends lifespan of tube sections exposed to acidic and high-temperature gas streams Conclusion The SS 310S Half Round Straight Tube Shield from Ladhani Metal Corporation provides superior protection in high-temperature environments, offering excellent oxidation resistance, long-term structural performance, and easy adaptability. Its low carbon content makes it suitable for welded applications where corrosion resistance must be preserved. Engineered for precision and performance, this shield is a reliable choice for heavy-duty thermal systems. For technical assistance, custom orders, or quotes, contact Ladhani Metal Corporation.

Send Message

Half Round Tube Shield for LTSH Tube

Cr25Ni20 Half Round Tube Shield for LTSH Tube

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered components used to safeguard boiler and heat exchanger tubes from damage due to high-temperature flue gases, particulate abrasion, and chemical scaling. Designed to fit over curved or straight tube surfaces, these shields are extensively used in power generation and industrial heating systems. The half-round design ensures streamlined installation and effective surface protection in high-wear regions. Cr25Ni20 Half Round Tube Shield for LTSH Tube The Cr25Ni20 Half Round Tube Shield is made from a high-temperature, high-chromium nickel alloy (containing approximately 25% chromium and 20% nickel) that offers superior resistance to oxidation, carburization, and sulfidation at elevated temperatures. This grade provides excellent mechanical stability and corrosion resistance, making it suitable for demanding environments such as Low Temperature Superheater (LTSH) zones in boilers. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr25Ni20 Half Round Tube Shields for LTSH systems, delivering heat- and corrosion-resistant solutions to enhance the durability of superheater tubes. Chemical Composition of Cr25Ni20 – High-Temperature Chromium-Nickel Alloy • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for LTSH tubes in environments where protection against thermal fatigue, ash erosion, and high-temperature oxidation is critical. Uses • Shields LTSH tubes in coal-fired boilers and HRSGs from ash particle abrasion and flue gas scaling • Protects tube bends and convection sections in waste heat recovery boilers (WHRBs) • Suitable for industrial boilers in petrochemical plants and refineries • Extends the life of tubes in steam generators used in corrosive and high-heat zones • Effective in biomass plants, waste incineration boilers, and marine heating systems Features • Exceptional heat resistance – High chromium and nickel content ensures reliable performance in high-temperature boiler zones • Superior oxidation and corrosion resistance – Suitable for flue gas streams with corrosive components • Custom fabrication – Manufactured to match exact tube diameter, length, and curvature requirements • Easy to install – Supports weld-on, clamp-on, or banding installation methods • Enhances tube longevity – Reduces wear from fly ash, soot, and gas flow • Low maintenance – Helps reduce downtime and operational costs in heat exchanger and boiler systems Applications • thermal power plants – Protects LTSH tube surfaces from thermal degradation and ash erosion • chemical processing units – Shields process heater tubes from acidic and oxidizing gases • WHRBs and HRSGs – Used in tube bends and lower convection sections for abrasion and heat protection • petrochemical refineries – Ensures long service life of tubes under cyclic temperature exposure • waste-to-energy plants – Minimizes scaling and wear from contaminated flue gases Conclusion The Cr25Ni20 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust shielding solution for high-temperature, corrosion-prone environments in thermal and industrial boilers. Offering outstanding oxidation resistance, thermal stability, and structural integrity, these shields are designed to protect LTSH tubes and improve system efficiency and longevity. For technical support, sizing options, or order inquiries, contact Ladhani Metal Corporation.

Send Message

U Type Outer Half Round Tube Shield

SS 430 U Type Outer Half Round Tube Shield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Send Message

U Type Half Round Tube Shield

Cr25Ni20 U Type Half Round Tube Shield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. Cr25Ni20 U Type Half Round Tube Shield The Cr25Ni20 U Type Half Round Tube Shield is a high-alloy protective component designed for U-bend tube sections in extreme temperature and corrosive service environments. Manufactured from Cr25Ni20, an austenitic heat-resistant stainless steel containing 25% chromium and 20% nickel, this shield offers exceptional resistance to oxidation, carburization, and high-temperature corrosion. It is ideal for shielding U-bends in heat exchangers, reformers, and superheaters exposed to long-term thermal cycling and aggressive industrial gases. • Outer U Type Half Round Tube Shield – Protects the outer arc of the U-bend from flame impingement, slag buildup, and high-velocity gas erosion in high-temperature zones. • Inner U Type Half Round Tube Shield – Shields the inner radius from turbulent gas-induced erosion, scaling, and localized thermal stress cracking. Ladhani Metal Corporation produces and supplies Cr25Ni20 U Type Half Round Tube Shields to support the performance and longevity of tubes operating under severe thermal and chemical load. Chemical Composition of Cr25Ni20 – High Chromium-Nickel Austenitic Stainless Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 2.00% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideally suited for high-temperature, oxidizing, and carburizing environments where heat resistance, structural integrity, and corrosion protection are essential. Uses • Protection of U-bend tubes in superheaters, reheaters, and heat recovery units in thermal power plants • Shielding curved tube sections in petrochemical reformers and high-temperature process gas systems • Guarding return bends in waste heat recovery boilers and HRSGs exposed to high thermal gradients and corrosive flue gases • Coverage of high-stress tube bends in chemical reactors and cracking furnaces • Suitable for use in metallurgy, cement kilns, and other high-heat processing systems Features • Outstanding heat resistance – Cr25Ni20 alloy maintains strength and structural integrity at temperatures exceeding 1000°C, with excellent oxidation resistance. • Superior corrosion protection – High chromium and nickel content offers strong resistance to carburization, nitridation, and sulfidation in aggressive gas environments. • Full U-bend coverage – Available in inner and outer configurations for complete protection of curved tube areas from erosion and scaling. • Precision fit – Custom-fabricated to match specific tube diameters and bend radii for a secure, vibration-free installation. • Quick installation – Can be mounted using banding, tack welding, or clamps without dismantling existing piping or tube assemblies. • Long service life – Engineered for durability in cyclic and continuous high-temperature service conditions, reducing downtime and replacement frequency. Applications • thermal power generation – Installed on U-bends in superheaters and reheaters to protect against extreme temperatures, slag impact, and flue gas corrosion. Extends service life and enhances system performance. • petrochemical processing – Used in tube bends of reformers and steam crackers operating in high-temperature, high-hydrocarbon environments. Ensures stability under carburizing conditions. • waste heat recovery systems – Shields U-tubes in WHRBs and HRSGs from flue gas erosion, slag accumulation, and heat-induced fatigue. • chemical and refining industries – Provides protection in reactors, heaters, and processing units where acidic and oxidizing gases are present at elevated temperatures. • metallurgical and cement industries – Ideal for tube bends exposed to extreme temperatures in kilns, furnaces, and gas processing lines. Conclusion The Cr25Ni20 U Type Half Round Tube Shield by Ladhani Metal Corporation delivers high-performance protection for U-bend tube sections operating under severe thermal and corrosive stress. With its high chromium-nickel alloy composition, this shield is engineered to withstand intense heat, oxidation, and chemical attack, making it an ideal solution for power generation, petrochemical, and high-temperature industrial systems. Custom-designed for fit, durability, and ease of installation, Cr25Ni20 shields enhance equipment reliability and reduce maintenance costs. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Send Message

Half Round Tube Shield

1Cr20Ni14Si2 Half Round Tube Shield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated components used to protect the external surfaces of tubes in boilers, heat exchangers, and high-temperature industrial equipment. These shields are critical for reducing erosion, oxidation, and thermal degradation, particularly in high-temperature zones where process gases, flames, or particulate matter can damage tube integrity over time. 1Cr20Ni14Si2 Half Round Tube Shield The 1Cr20Ni14Si2 Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured from a high-performance austenitic stainless steel alloy consisting of approximately 20% chromium, 14% nickel, and 2% silicon. This alloy is designed for excellent oxidation resistance, carburization resistance, and high-temperature structural stability. The inclusion of silicon significantly enhances the formation of a protective oxide film, making it suitable for use in severe thermal environments such as industrial furnaces, superheaters, and reformers. The shield’s half-round profile is engineered for easy installation over the tube surface, ensuring a tight, durable fit and long-term protection. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.15% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields critical areas of superheater and reheater tubes from oxidation and scale formation under high flue gas temperatures. • Furnace Tube Shielding – Guards against flame impingement, high-temperature corrosion, and mechanical erosion in radiant and convection zones. • Heat Exchanger Cladding – Offers external protection for tubes subjected to thermal shock and corrosive process gases. • Steam Reforming Equipment – Prevents surface degradation of tubes in syngas and hydrogen production systems operating under carburizing conditions. • Waste Heat Boilers and Incinerators – Provides a thermal barrier for tubes exposed to particulate-laden gas flows and fluctuating temperatures. Features • Excellent Oxidation Resistance – High chromium and silicon content form a dense, protective oxide layer for long service in oxidizing environments. • Carburization and Thermal Fatigue Resistance – Suitable for prolonged use in atmospheres containing hydrocarbons, CO, and high radiant heat. • High-Temperature Durability – Retains strength and resists creep deformation at service temperatures up to 1000°C. • Austenitic Microstructure – Offers superior ductility, resistance to cracking under thermal cycling, and excellent metallurgical stability. • Easy Installation – Half-round configuration allows for fast on-site fitment using mechanical clamping or welding, with minimal tube disruption. • Surface Finishing Options – Available in pickled, passivated, or bright annealed finishes for improved corrosion and heat resistance. • Custom Built – Manufactured to meet specific size, thickness, and design requirements for varied industrial applications. Applications • Thermal Power Plants – Used to protect boiler tubes in high-temperature zones like superheaters, economizers, and air preheaters. • Petrochemical and Refining Plants – Deployed in furnace tubes, reformer systems, and transfer line exchangers where oxidation and carburization are concerns. • Waste-to-Energy Systems – Protects boiler and heat recovery tubes from corrosive gas attack and ash erosion in incinerators. • Metallurgical Furnaces – Applied in annealing, forging, and reheating furnaces for protecting tube walls exposed to high heat and corrosive gases. • Cement and Lime Kilns – Shields heat recovery piping and cooler tubes from abrasion and elevated thermal conditions. • Chemical Process Equipment – Guards steam and process tubes in reactors, condensers, and exchangers from scaling and thermal damage. Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered to perform reliably in high-temperature, high-corrosion industrial environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this alloy-based shield offers superior performance and longevity for boiler and furnace applications. Its austenitic structure ensures mechanical stability and ductility under extreme conditions, while its precise half-round design enables convenient installation and durable coverage. Custom-built to your project’s specifications, Ladhani Metal Corporation’s tube shields represent a smart investment in system protection, reliability, and long-term efficiency. For technical details, customization options, or a quotation, please contact Ladhani Metal Corporation.