'strong acids solvents'

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2633 Monel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. Designed for pipeline systems operating at pressures up to 16 bar (232 psi), these flanges provide exceptional resistance to corrosive environments, including seawater, acids, and alkalis. Manufactured from high-performance Monel alloys such as Monel 400 and Monel K500, they combine outstanding mechanical strength with excellent corrosion resistance, making them suitable for demanding industrial and marine applications. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for superior material quality, dimensional accuracy, and strict compliance with international standards. Each flange undergoes rigorous quality checks and testing to ensure consistent performance in critical service conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring corrosion resistance and structural reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure smooth flow transitions, proper pipe alignment, and minimized stress concentration for high-integrity connections. • Flat Face (FF) Flanges Provides a uniform sealing surface ideal for systems with soft gasket materials or cast mating components, ensuring optimal gasket compression. Monel Grades and Full Composition: Monel 400 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Widely used in marine engineering, chemical processing, pump and valve components, and environments exposed to hydrofluoric and sulfuric acids. Monel K500 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Suitable for high-strength applications in marine, oil and gas, and sour gas service environments. Offers improved mechanical properties over Monel 400 while retaining excellent corrosion resistance. Applications of DIN 2633 Monel Flanges PN 16: • Marine and Offshore Systems Ideal for saltwater piping, desalination systems, and submerged components due to excellent resistance to chloride stress corrosion. • Chemical Processing Industries Used in systems handling strong acids, alkalis, and organic solvents, especially hydrofluoric acid. • Oil and Gas Exploration Resistant to sour gas environments, high pressures, and corrosive drilling fluids. • Heat Exchangers and Condensers Monel flanges are preferred for their stability under fluctuating thermal loads and corrosive fluids. • Power Generation Used in cooling water and fuel handling systems where reliability under stress and corrosion is essential. Key Features: • Manufactured to DIN 2633 specifications • PN 16 rating for medium-pressure pipelines • Weld neck design for stress-distributed, leak-proof connections • Available in Monel 400 and K500 grades for tailored performance • Excellent resistance to corrosion in marine, acidic, and alkaline environments • High tensile strength and resistance to mechanical fatigue • Custom sizes, pressure classes, and finishes available on request Conclusion: DIN 2633 Monel Flanges PN 16 from Ladhani Metal Corporation offer robust performance in highly corrosive and pressure-sensitive applications. With superior resistance to seawater, acids, and harsh industrial chemicals, these flanges are engineered for longevity and strength in marine, chemical, and oil and gas systems. For custom configurations, technical advice, or pricing details, contact Ladhani Metal Corporation today.

DIN 2628 Monel flanges PN 250 are high-performance weld neck flanges engineered in compliance with the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are constructed from Monel alloys, known for their exceptional resistance to corrosion, particularly in acidic and saline environments. Monel flanges deliver robust mechanical strength and thermal stability, making them suitable for challenging industrial applications that involve fluctuating temperatures, corrosive substances, and high mechanical stress. Ladhani Metal Corporation is a reliable global manufacturer and exporter of Monel flanges, providing products that meet exacting international standards for quality and performance. Our DIN 2628 PN 250 Monel weld neck flanges are extensively used in chemical processing, marine engineering, desalination systems, and offshore oil and gas installations. Known for superior build quality and long-term durability, these flanges ensure safe and efficient operations in pressure-sensitive systems exposed to harsh service conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for systems requiring high-pressure endurance, secure sealing capabilities, and enhanced structural integrity. Flange Type: • Weld Neck Flanges Characterized by a long tapered hub that minimizes stress at the weld junction. Ideal for high-temperature and high-pressure applications. • Flat Face (FF) Flanges Provides an even surface for gasket compression, ensuring reliable sealing. Well-suited for connections involving cast components or brittle materials. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Offers excellent resistance to seawater, hydrofluoric acid, and alkalis. Commonly used in marine piping, pump shafts, heat exchangers, and chemical processing equipment. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy providing greater strength and hardness than Monel 400. Suitable for valves, springs, and high-strength fasteners in corrosive environments including marine and chemical processing systems. Applications of DIN 2628 Monel Flanges PN 250: • Marine Engineering Highly resistant to saltwater corrosion, suitable for shipbuilding, subsea pipelines, and desalination plants. • Chemical and Petrochemical Processing Performs well in environments containing strong acids, alkalis, and chlorinated solvents. • Offshore Oil and Gas Used in systems that handle sour gas, brine, and other corrosive fluids. • Power and Energy Ideal for condenser systems and piping exposed to high-pressure steam and corrosive environments. • Pulp and Paper Industry Effective in processes involving sulfur compounds and acidic bleaching agents. Key Features: • Designed in accordance with DIN 2628 specifications • Rated for PN 250 (250 bar / 3625 psi) pressure systems • Weld neck configuration ensures superior mechanical strength and fatigue resistance • Flat face option supports uniform gasket pressure distribution • Available in Monel 400 and Monel K500 grades • Excellent corrosion resistance in marine, chemical, and high-saline environments • High mechanical strength and good thermal performance • Custom dimensions, pressure classes, and surface finishes available on request Conclusion: DIN 2628 Monel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure systems operating in some of the most demanding service environments. With excellent resistance to corrosion, superior mechanical properties, and thermal stability, Monel flanges provide reliable, long-term service in critical applications across marine, chemical, and offshore industries. Contact Ladhani Metal Corporation for detailed product specifications, technical support, or to request a customized quote.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

DIN 2576 Inconel Flanges PN 10 are high-performance, slip-on flanges engineered from nickel-chromium-based superalloys designed for use in corrosive and high-temperature industrial environments. Manufactured to the DIN 2576 standard, these flanges are well-suited for low to medium-pressure applications requiring exceptional resistance to oxidation, thermal stress, and chemical attack. The slip-on design allows the flange to slide over the pipe and be welded in place, providing accurate alignment and strong mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, offering precision-engineered components that meet international quality and dimensional standards. DIN 2576 Inconel flanges are ideal for challenging applications in aerospace, chemical processing, power generation, and marine systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for low to moderate pressure operations, delivering reliable sealing and long-term performance in fluid and gas transport systems. Flange Types: • Slip-On Flanges Designed to fit over the pipe and be welded on both sides, offering simplified installation and secure mechanical performance. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, providing uniform gasket compression and sealing integrity, especially with brittle or non-metallic components. Inconel Grades and Composition: Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Trace elements: Manganese, Silicon, Copper Applications: Inconel 600 offers excellent resistance to high-temperature oxidation, chloride-ion stress corrosion cracking, and acidic environments. Commonly used in furnace components, chemical process heaters, and nuclear reactors. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% Applications: Inconel 625 is known for its outstanding corrosion resistance in harsh conditions, including seawater, acid baths, and high-pressure environments. It is used extensively in marine hardware, offshore oil and gas systems, and aerospace exhaust systems. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti) + Aluminum (Al): ~1% Applications: Inconel 718 is a high-strength, precipitation-hardenable alloy with excellent corrosion and oxidation resistance. It performs well in cryogenic to high-temperature environments and is widely used in jet engines, high-temperature bolting, power generation turbines, and downhole oil and gas equipment. Applications of DIN 2576 Inconel Flanges: • Chemical and Petrochemical Processing Ideal for use in systems handling strong acids, solvents, and oxidizing agents at elevated temperatures. • Power Generation Used in heat exchangers, boiler systems, and turbine piping exposed to thermal cycling and steam corrosion. • Marine and Offshore Industries Excellent choice for seawater-cooled systems, marine risers, and subsea components due to its resistance to pitting and crevice corrosion. • Aerospace and Defense Applied in engine exhausts, combustion chambers, and other high-heat zones requiring structural integrity under extreme conditions. • Nuclear and High-Risk Industrial Systems Reliable in applications with radioactive or caustic media, where corrosion and temperature resistance are critical. Key Features: • Manufactured to DIN 2576 standard • PN 10 pressure rating suitable for moderate-pressure piping systems • Outstanding resistance to corrosion, oxidation, and high temperatures • Available in Inconel 600, 625, and other grades upon request • Slip-on design for ease of welding and proper pipe alignment • Flat face options for compatibility with a variety of gaskets and joint materials • Ideal for harsh chemical, thermal, and marine environments • Custom sizes, face types, and finishes available as per project requirements Conclusion: DIN 2576 Inconel Flanges PN 10 from Ladhani Metal Corporation are engineered for the toughest industrial environments, delivering performance, durability, and corrosion resistance where stainless steel or other materials may fail. For material selection support, technical data sheets, or customized orders, contact Ladhani Metal Corporation today.

DIN 2576 Titanium Flanges PN 10 are premium-quality, slip-on flanges crafted from corrosion-resistant titanium alloys, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer exceptional corrosion resistance, lightweight performance, and structural reliability, especially in chemically aggressive and marine environments. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring proper alignment and mechanical strength across diverse industrial sectors. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, supplying components that meet stringent international standards for quality, dimension, and performance. DIN 2576 titanium flanges are well-suited for demanding applications where resistance to chlorides, seawater, and strong oxidizers is critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, ensuring safe and long-term functionality in fluid, gas, and chemical transport systems. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide ease of installation and dependable structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure proper load distribution and effective sealing, especially when paired with non-metallic or cast components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H): Trace amounts Applications: Commercially pure titanium Grade 2 is known for its excellent corrosion resistance, formability, and weldability. It is widely used in chemical processing, desalination plants, and medical equipment. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium offers superior strength and corrosion resistance, making it ideal for high-performance applications such as aerospace systems, offshore platforms, and high-stress piping environments. Applications of DIN 2576 Titanium Flanges: • Chemical and Petrochemical Industries Ideal for systems handling corrosive fluids, acids, and solvents, especially in chlorinated or oxidizing environments. • Desalination and Water Treatment Extensively used in seawater pipelines, brine systems, and high-purity water processing due to titanium’s resistance to chloride attack. • Marine and Offshore Engineering Suitable for shipbuilding, underwater pipelines, and ballast systems where corrosion from saltwater is a major concern. • Aerospace and Defense Used in lightweight, high-strength piping assemblies and fuel systems exposed to extreme environments. • Medical and Pharmaceutical Equipment Preferred for its biocompatibility and corrosion resistance in sterile and hygienic fluid handling systems. • High-Temperature and Reactive Environments Titanium Grade 5 flanges are used in systems exposed to thermal cycling, strong oxidizers, or aggressive chemical media. Key Features: • Manufactured in accordance with DIN 2576 standard • PN 10 pressure rating for moderate pressure systems • Exceptional resistance to corrosion, especially from seawater and chemicals • Available in Titanium Grade 2 and Grade 5 • Slip-on design for easy installation and accurate alignment • Flat face options compatible with specific gaskets and joint types • Lightweight yet mechanically strong • Suitable for marine, aerospace, medical, and chemical processing industries • Custom sizes, face types, and surface finishes available upon request Conclusion: DIN 2576 Titanium Flanges PN 10 from Ladhani Metal Corporation offer an ideal solution for industries requiring high corrosion resistance and durability in low to medium-pressure systems. With options in commercially pure and alloyed titanium, these flanges are engineered to meet the most demanding applications. For technical consultation, custom designs, or ordering information, contact Ladhani Metal Corporation today.

DIN 2567 titanium flanges are precision-engineered threaded flanges designed for high-performance, medium-to-high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer exceptional resistance to corrosion, extreme temperatures, and aggressive media. The threaded design allows for easy, weld-free installation, making them ideal for applications where frequent maintenance or system modifications are required. Ladhani Metal Corporation is a leading manufacturer and exporter of titanium flanges, supplying durable and high-quality components for industries that demand superior corrosion resistance and mechanical strength. DIN 2567 titanium flanges are widely used in marine, chemical, aerospace, and water treatment systems. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for moderate to high-pressure systems handling corrosive fluids or gases. Ideal for chemical, marine, and water treatment applications. • PN 40 (40 bar / 580 psi): Designed for high-pressure, high-performance environments requiring maximum reliability and resistance to mechanical stress. Commonly used in offshore, aerospace, and power generation systems. Flange Types: • Threaded (Screwed) Flanges Quick and convenient for non-welded, removable connections in high-purity or corrosive systems. • Raised Face (RF) Flanges Designed to enhance sealing efficiency by focusing compression on the gasket area. • Flat Face (FF) Flanges Ideal for use with non-metallic or brittle mating materials in low-to-medium pressure environments. • Forged Threaded Flanges Provide enhanced mechanical integrity, dimensional precision, and impact resistance. • Custom-Machined Flanges Available in customer-specified sizes, pressure ratings (PN 25, PN 40), and titanium grades. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) Composition: Titanium (Ti): ≥ 98.9% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Grade 5 (Titanium Alloy – Ti-6Al-4V) Composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications of DIN 2567 Titanium Flanges: • Chemical Processing: Resists corrosion from strong acids, solvents, and chlorides • Marine and Offshore Engineering: Performs reliably in saltwater environments and subsea installations • Aerospace and Defense: Used in lightweight, high-strength fuel and hydraulic systems • Power Generation: Handles steam and chemical media in nuclear and thermal power plants • Water & Wastewater Treatment: Ideal for high-purity systems, brine lines, and filtration units • Medical and Pharmaceutical: Suitable for bio-compatible and sterile fluid transport systems Key Features: • Manufactured to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • Superior resistance to corrosion, erosion, and chemical attack • Lightweight structure with high tensile strength • Easy installation with threaded connections—no welding required • Suitable for both cryogenic and elevated temperature conditions Conclusion: DIN 2567 titanium flanges PN 25 and PN 40 from Ladhani Metal Corporation are the ideal choice for demanding, corrosion-sensitive environments. Combining strength, lightweight construction, and superior corrosion resistance, these flanges deliver long-lasting performance in critical applications across various industries. For detailed specifications, custom designs, or bulk orders, contact Ladhani Metal Corporation today.

Aka CAS No. 13463-67-7, Titanium (VI) oxide, Titania, Rutile, Anatase, Brookite Titanium Dioxide Chemical Titanium Dioxide, also referred to Titania, has a molecular formula of Ti02 and this mineral compound – a white colored, odorless solid – is available in three different forms. Rutile titanium dioxide is the most common naturally occurring form followed by the anatase form but titanium dioxide can also be produced synthetically. Titanium dioxide is produced from either ilmenite, rutile or titanium slag. The titanium pigment is extracted by using either sulphuric acid (sulphate process) or chlorine (chloride route). The sulphate process employs simpler technology while the chloride route produces a purer product. Titanium Dioxide – classified by CAS No. 13463-67-7 – is mined as a mineral in magmatic rocks. It is non-flammable, non-explosive and titanium dioxide is the most widely used pigment because of its brightness and refractive index. Bulk Chemicals Pallate Over 4 million tons of titanium dioxide are used worldwide every year for a wide array of common applications like paint, coatings, plastics, papers, ink, food (it’s often used to whiten skim milk and to enhance the flavor of nuts, seeds, soup and beer), medicine and toothpaste. Titanium Dioxide is also used in cosmetics and skin care products as a pigment, in sunscreen and sunblock as a thickener to protect the skin from ultraviolet light. Titanium Dioxide, believe it or not, is used to mark the white lines on the tennis courts at Wimbledon. Indeed, titanium dioxide accounts for 70% of the total production of pigments worldwide because “titanium white,” as it’s often called, is one of the whitest materials known to exist on Earth. In fact, titanium dioxide is even more reflective than diamonds!

Aerospace Titanium Specifications (AMS 49) AMS 4900 Plate, Sheet & Strip – Annealed –55,000 psi Yield AMS 4901 Sheet, Strip & Plate – Annealed – 70,000 psi Yield AMS 4902 Plate, Sheet & Strip – Annealed – 40,000 psi Yield AMS 4905 Plate, Damage Tolerant Grade – 6AI 4V, Beta Annealed AMS 4907 Plate, Sheet & Strip – 6Al-4V, Extra Low Interstitial, Annealed AMS 4908 Sheet & Strip – 8Mn Annealed - 110,000 psi Yield AMS 4909 Plate, Sheet & Strip – 5Al-2.5Sn, Extra Low Interstitial, Annealed AMS 4910 Plate, Sheet & Strip – 5Al-2.5Sn, Annealed AMS 4911 Sheet, Strip & Plate – 6Al-4V, Annealed AMS 4914 Sheet & Strip – 15V 3Cr 3Sn #AI – Solution Heat Treated AMS 4915 Plate, Sheet & Strip – 8Al-1Mo-1V – Single Annealed AMS 4916 Plate, Sheet & Strip – 8Al-1Mo-1V – Duplex Annealed AMS 4917 Plate, Sheet & Strip – 13.5V 11Cr 3Al – Solution Treated AMS 4918 Plate, Sheet & Strip –6Al-6V-2Sn – Annealed AMS 4919 Sheet, Strip & Plate – 6Al 2Sn 4Zr-2Mo – Annealed AMS 4920 Forgings – 6Al-4V – Alpha Beta or Beta Processed – Annealed AMS 4921 Bars, Forgings & Rings – Annealed – 70,000 psi Yield AMS 4924 Bars, Forgings & Rings – 5Al-2.5Sn – Extra Low Interstitial, Annealed – 90,000 psi Yield AMS 4926 Bars & Rings – 5Al-2.5Sn – Annealed – 110,000 psi Yield AMS 4928 Bars & Forgings – 6Al-4V – Annealed – 120,000 psi Yield AMS 4930 Bars, Forgings & Rings – 6Al-4V – Extra Low Interstitial, Annealed AMS 4931 Bars, Forgings & Rings – 6Al-4V ELI, Duplex Annealed, Fractured Toughness AMS 4933 Extrusions & Flash Welded Rings – 8AI 1Mo 1V – Solution Heat Treated & Stabilized AMS 4934 Extrusions & Flash Welded Rings - 6Al-4V – Solution Heat Treated & Aged AMS 4935 Extrusions & Flash Welded Rings – 6Al-4V – Annealed, Beta Processed AMS 4936 Extrusions & Flash Welded Rings – 6Al-4V – Beta Processed AMS 4941 Tubing, Welded – Annealed – 40,000psi Yield AMS 4942 Tubing, Seamless – Annealed – 40,000 psi Yield AMS 4943 Tubing, Seamless – Annealed – 3.0Al 2.5V AMS 4944 Tubing, Seamless – hydraulic – 3.0Al 2.5V – Cold Worked, Stress Relieved AMS 4951 Wire, Welding – Commercially Pure AMS 4953 Wire, Welding – 5Al 2.5Sn AMS 4954 Wire, Welding –6Al 4V AMS 4955 Wire, Welding – 8Al 1Mo 1V AMS 4956 Wire, Welding – 6Al 4V – Extra Low Interstitial, Environment Controlled AMS 4957 Bars & Wire, 3Al-8V-6Cr-4Mo-4Zr, Consumable Electrode Melted, Cold Drawn AMS 4958 Bars & Rod – 3Al-8V-6Cr-4Mo-4Zr, Consumable Electrode Melted, Solution Heat Treated & Centerless Ground AMS 4959 Wire – 13.5V 11Cr 3Al – Spring Temper AMS 4965 Bars, Forgings & Rings – 6Al-4V – Solution & Precipitation Heat Treated AMS 4966 Forgings – 5Al-2.5Sn – Annealed – 110,000 psi Yield AMS 4967 Rings & Forgings – 6Al-4V – Annealed, Heat Treatable AMS 4970 Bars & Forgings – 7Al 4Mo – Solution & Precipitation Heat Treated AMS 4971 Bars, Forgings & Rings – 6Al-6V-2Sn – Annealed, Heat Treatable AMS 4972 Bars & Rings – 8Al-1Mo-1V – Solution Heat Treated & Stabilize AMS 4973 Forgings – 8Al 1Mo 1V - Solution Heat Treated & Stabilized AMS 4974 Bars & Forgings – 11Sn 5.0Zr 2.3Al 1.0Mo 0.21Si - Solution & Precipitation Heat Treated AMS 4975 Bars & Rings – 6Al-2Sn-4Zr-2Mo - Solution & Precipitation Heat Treated AMS 4976 Forgings - 6Al-2Sn-4Zr-2Mo - Solution & Precipitation Heat Treated AMS 4979 Bars, Forgings & Rings – 6Al-6V-2Sn - Solution & Precipitation Heat Treated AMS 4981 Bars & Forgings 6Al 2Sn 4Zr 6Mo - Solution & Precipitation Heat Treated AMS 4983 Forgings – 10V 2Fe 3Al – Solution Heat Treated & Aged Military Titanium Specifications Mil-T-9046H Titanium & Titanium Alloy Sheet, Strip & Plate Type I – Commercially Pure: Composition A – CP GR 2 (40 KSI) Composition B – CP GR 4 (70 KSI) Composition C – CP GR 3 (55 KSI) Type II – Alpha Alloys: Composition A - 5Al-2.5Sn Composition B - 5Al-2.5Sn ELI Composition F – 8Al-1Mo-1V Composition G – 6Al-2Cb-1Ta-.8Mo Type III – Alpha-Beta Alloys: Composition C – 6Al-4V Composition D – 6Al-4V ELI Composition E – 6Al-6V-2Sn Composition G – 6Al-4Sn-4Zr-2Mo Composition H – 6Al-4V SPL Type IV – Beta Alloys Composition A – 13Al-11Cr-3Al Composition B – 11.5Mo-6Zr-4.5Sn (Beta III) Composition C – 3Al-8V-6Cr-4Mo-4Zr (Beta C™)(10) MIL-T-9046J Titanium & Titanium Alloy Sheet , Strip & Plate Commercially Pure (CP CP-1 – Grade 4 (70 KSI) CP-2 – Grade 3 (55 KSI) CP-3 – Grade 2 (40 KSI) CP-4 – Grade 1 (25 KSI) Alpha Alloys (A) A-1 – 5Al-2.5Sn A-2 – 5Al-2.5Sn (ELI) A-3 – 6Al-2Cb-1Ta-.8Mo A-4 – 8Al-1Mo-1V Alpha-Beta Alloys (AB) AB-1 – 6Al-4V AB-2 – 6Al-4V (ELI) AB-3 – 6Al-6V-2Sn AB-4 – 6Al-2Sn-4Zr-2Mo AB-5 – 3Al-2.5V AB-6 – 8Mn Beta Alloys (B) B-1 – 13V-11Cr-3Al B-2 – 11.5Mo-6Zr-4.5Sn (Beta III) B-3 – 3Al-8V-6Cr-$Mo-$zr (Beta C™)(10) B-4 – 8Mo-8V-2Fe-3Al MIL-T-9047E Titanium & Titanium Alloy Bars & Reforging Stock Alpha Alloys Composition 1 – Unalloyed Composition 2 – 5Al-2.5Sn Composition 3 – 5Al-2.5Sn ELI Composition 5 – 5Al-1Mo-1V Alpha-Beta Alloys Composition 6 – 6Al-4V Composition 7 – 6Al-4V ELI Composition 8 - 6Al-6V-2Sn Composition 9 – 7Al-4Mo Composition 10 – 11Sn-5Zr-2Al-1Mo Composition 11 – 6Al-2Sn-4Zr-2Mo Composition 14 – 6Al-2Sn-4Zr-6Mo Beta Alloys Composition 12 – 13V-11Cr-3Al Composition 13 – 11.5Mo-6Zr-4.5Sn (Beta III) MIL-T-9047G Titanium & Titanium Alloy Bars & Reforging Stock, Aircraft Quality Commercially Pure TI-CP-70 (Grade 4) Alpha Alloys Ti – 5Al-2.5Sn Ti – 5Al-2.5Sn (ELI) 6Al-2Cb-1Ta-.8Mo 8Al-1Mo-1V Alpha-Beta Alloys Ti – 3Al-2.5V Ti – 6Al-4V Ti – 6Al-4V (ELI) Ti – 6Al-6V-2Sn Ti – 6Al-2Sn-4Zr-2Mo Ti – 6Al-2Sn-4Zr-6Mo Ti –7Al-4Mo Beta Alloys Ti – 8Mo-8V-2Fe-3Al Ti – 11.5Mo-6Zr-4.5Sn (Beta III) Ti – 3Al-8V-6Cr-4Mo-4Zr (Beta C™)(10) Ti – 13V-11Cr-3Al Imperial and Metric sizes available upon request.