'stressed systems'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect the surfaces of boiler tubes, superheaters, and heat exchanger coils from high-temperature corrosion, erosion, slag deposition, and scaling. Widely used in power generation, petrochemical, and industrial processing systems, these shields are fabricated with a half-round profile that allows quick installation over curved or straight tube surfaces, extending service life and minimizing repair and replacement needs. Cr23Ni13 U Type Inner Half Round Tube Shield The Cr23Ni13 U Type Inner Half Round Tube Shield is manufactured from a chromium-nickel austenitic alloy known for its excellent high-temperature resistance, structural stability, and corrosion resistance. It performs reliably under continuous thermal exposure and is well-suited for systems exposed to oxidizing, carburizing, and sulfur-rich gases. The inner U-type configuration is designed specifically to shield the inner arc of U-bend tubes, which are more susceptible to localized turbulence, thermal fatigue, and scale formation. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, providing targeted protection from flue gas erosion, thermal scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr23Ni13 U Type Inner Half Round Tube Shields, offering precision-engineered solutions for high-performance thermal and chemical systems. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for continuous exposure to high temperatures in oxidizing and chemically aggressive environments. Ideal for inner bend protection in return coil systems subjected to high thermal load and corrosive gas flow. Uses • Protects inner arcs of U-bend tubes in thermal power plant superheaters, reheaters, and economizers • Installed in WHRBs and HRSGs to resist scale and slag in return bends exposed to flue gas turbulence • Applied in steam reformers, process furnaces, and heat exchangers where inner tube surfaces face corrosive and hot gas impact • Used in chemical reactors and cracking units operating under cyclic thermal and chemical stress • Suitable for long-term protection of curved tubes in industrial combustion and heating equipment Features • High-temperature oxidation resistance – Performs in continuous service above 1000°C • Inner arc shielding – Targets protection for the most erosion-prone and heat-stressed tube area • Corrosion resistance – Withstands exposure to sulfur-rich gases, acidic vapors, and flue gas byproducts • Fabricated to specification – Available in custom sizes and bend radii for a precise fit and stable coverage • Simple installation – Can be secured using clamping, banding, or welding without disrupting the system • Extended service life – Reduces risk of tube failure, minimizes maintenance downtime, and improves system efficiency Applications • thermal and power generation – Protects inner U-bend surfaces from corrosion and erosion in steam circuits • petrochemical processing – Shields return bends in reformers and exchangers from hot process gases • waste heat recovery – Used in curved tubes of WHRBs and HRSGs for inner arc scale protection • chemical industry – Applied in reactors and thermal systems subjected to chemical vapors and high heat • furnace and incineration systems – Effective in resisting slag and gas-induced wear in industrial burners Conclusion The Cr23Ni13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable inner arc protection for U-bend tubes operating in aggressive thermal and chemical environments. Its high-temperature and corrosion-resistant properties make it ideal for safeguarding critical process tubes across a range of high-performance industrial systems. For technical consultation, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

DIN 2527 Carbon Steel (C.S.) Blind Flanges are designed to seal the ends of pipes or vessels in industrial piping systems where no further connection is required. These blind flanges are made from carbon steel, which is known for its strength, durability, and cost-effectiveness. The DIN 2527 standard ensures that these flanges meet precise dimensional and mechanical requirements for reliability under various industrial conditions. Material Composition of Carbon Steel (C.S.) Blind Flanges: The material used in DIN 2527 carbon steel blind flanges typically includes carbon steel grades like St 37, St 52, or A105, which are commonly used for pressure-containing parts in piping systems. The general composition of carbon steel includes: Carbon (C): 0.05% to 0.25% – Provides strength and hardness. Manganese (Mn): 0.30% to 0.90% – Enhances toughness and strength. Silicon (Si): 0.10% to 0.60% – Adds strength and hardness. Phosphorus (P): Up to 0.04% – Ensures better toughness and workability. Sulfur (S): Up to 0.05% – Keeps the material ductile and machinable. Iron (Fe): The remainder of the material – Makes up the base composition. These carbon steel grades provide excellent mechanical properties, such as strength, ductility, and weldability, making them suitable for a wide range of applications in moderate temperature and pressure environments. Key Features of DIN 2527 Carbon Steel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: Carbon steel can withstand temperatures up to 400°C (752°F) without significant degradation. It is ideal for moderate temperature applications. Pressure Tolerance: DIN 2527 carbon steel blind flanges come with pressure ratings such as PN6, PN10, PN16, PN25, and higher, ensuring they can safely handle pressure in piping systems. Corrosion Resistance: Carbon steel is not highly resistant to corrosion, especially in moisture, chlorides, or acidic environments. To enhance the corrosion resistance, these flanges can be galvanized or coated (with zinc or paint), which helps in increasing their durability in mildly corrosive environments. Strength and Durability: Carbon steel offers high strength and good toughness under moderate stress and pressure conditions. It is stronger than mild steel, providing a reliable seal for general industrial use. Dimensional Accuracy and Pressure Class: The DIN 2527 standard ensures precise dimensional accuracy, enabling easy and reliable installation. Carbon steel blind flanges come in different pressure ratings like PN6, PN10, PN16, and PN25, providing flexibility based on the system's pressure requirements. Design and Types of DIN 2527 Carbon Steel Blind Flanges: Standard Blind Flange (Type A): A solid circular flange used for general isolation of pipeline sections where no further connection is needed. Flat-Faced Blind Flange: This flange features a flat sealing surface, making it suitable for low-pressure systems or applications where a tight seal is not required. Raised Face Blind Flange: Has a raised surface for a better seal in medium-to-high-pressure systems, where the flange is bolted to a matching raised face of another flange. Ring-Type Joint (RTJ) Blind Flange: Used in high-pressure systems, this flange has a groove that holds an RTJ gasket, offering a superior seal under high-pressure conditions. Long Weld Neck Blind Flange: Features an extended neck for welding to the pipe, providing additional strength and making it suitable for high-pressure or high-stress applications. Nominal Diameter: Available in a wide range of nominal diameters (e.g., DN10, DN50, DN150, DN600), ensuring compatibility with different pipe sizes and system requirements.

DIN 2527 Mild Steel Blind Flanges are specialized components designed to seal the ends of pipes or vessels in industrial piping systems where no further connection is required. These flanges, made from mild steel, are used in a wide range of applications due to the material's strength, cost-effectiveness, and ease of fabrication. The DIN 2527 standard ensures that these flanges meet the highest specifications for dimensional accuracy, pressure tolerance, and mechanical strength, making them ideal for general-purpose sealing in various industries. Material Composition of Mild Steel (MS) Flanges: Mild steel, or low-carbon steel, is commonly used for manufacturing DIN 2527 blind flanges. The composition of mild steel typically includes: Carbon (C): 0.05% to 0.25% – Provides strength while ensuring ductility and ease of welding. Manganese (Mn): 0.30% to 0.90% – Enhances strength and hardenability. Silicon (Si): 0.10% to 0.60% – Contributes to deoxidation and strength. Phosphorus (P): Up to 0.04% – Low phosphorus content ensures better toughness. Sulfur (S): Up to 0.05% – Low sulfur content to avoid brittleness. Iron (Fe): The remaining composition – Mild steel is primarily iron. This composition provides a cost-effective material with good weldability, formability, and mechanical properties for most non-corrosive applications. Key Features of DIN 2527 Mild Steel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: While mild steel doesn't handle extreme temperatures as well as superalloys like Inconel, it is suitable for moderate temperature environments where temperatures do not exceed around 300°C (572°F). Pressure Tolerance: DIN 2527 mild steel blind flanges are available in standard pressure ratings, such as PN6, PN10, PN16, and higher pressure classes depending on the application. These pressure ratings ensure the flanges are safe and durable under normal industrial pressures. Dimensional Accuracy and Pressure Class: The DIN 2527 standard ensures precise dimensional accuracy of mild steel blind flanges, making them easy to install in piping systems. These flanges are available in various sizes and thicknesses, with flanges designed to meet specific pressure classes such as PN6, PN10, PN16, PN25, and PN40, depending on the application. Design and Types of DIN 2527 Mild Steel Blind Flanges: Standard Blind Flange (Type A): A solid, circular flange ideal for general applications where no further connection is required. It provides a simple and reliable seal for pipeline isolation. Flat-Faced Blind Flange: Features a flat sealing surface, suitable for low-pressure systems or applications with minimal sealing requirements. It is typically used in systems where the flange is bolted directly to a flat mating surface. Raised Face Blind Flange: Has a raised surface to improve sealing performance under higher pressure applications. This type ensures a tighter seal and is ideal for medium-to-high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Designed for high-pressure systems, it has a groove that holds an RTJ gasket. This design ensures a high-pressure seal and is often used in critical applications where pressure integrity is essential. Long Weld Neck Blind Flange: Features an extended neck for welding to the pipe, offering additional strength and stability. It is used in high-pressure or stressed systems that require the flange to be securely welded to the pipeline. Nominal Diameter: Available in a wide range of nominal diameters (e.g., DN10, DN50, DN150, DN600, DN1000), to accommodate different pipe sizes and system requirements.

DIN 2527 SS P.H. (Precipitation Hardening) Blind Flanges are designed for use in high-performance piping systems that require robust sealing solutions. Made from precipitation-hardening stainless steel alloys, these flanges combine high strength, excellent corrosion resistance, and the ability to withstand elevated temperatures. Manufactured to meet the DIN 2527 standard, these flanges ensure dimensional accuracy, high pressure tolerance, and superior mechanical performance, making them ideal for demanding applications in industries such as chemical processing, aerospace, and power generation. Material Composition of Precipitation Hardening Stainless Steel (SS P.H.): Precipitation-hardening stainless steels are a family of alloys known for their ability to achieve high strength through heat treatment. Grade 17-4 PH: Chromium (Cr): 15.0% - 17.5% Nickel (Ni): 3.0% - 5.0% Copper (Cu): 3.0% - 5.0% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Grade 15-5 PH: Chromium (Cr): 14.0% - 15.5% Nickel (Ni): 3.5% - 5.5% Copper (Cu): 2.5% - 4.5% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Key Features of DIN 2527 SS P.H. Blind Flanges: High Strength: Precipitation-hardened stainless steels, such as 17-4 PH and 15-5 PH, are known for their high tensile strength and hardness. Corrosion Resistance: Stainless steel, especially in the precipitation-hardened grades, offers excellent resistance to corrosion, including resistance to pitting, crevice corrosion, and stress corrosion cracking in both aqueous and high-temperature environments High-Temperature Performance: SS P.H. Blind Flanges can withstand high temperatures, making them suitable for use in applications that involve elevated temperatures (up to 600°C or 1100°F), such as chemical reactors, power plants, and aerospace systems. Dimensional Accuracy & Pressure Ratings: These flanges are manufactured to precise DIN 2527 standards to ensure tight seals and correct fitment in piping systems. They are available in multiple pressure classes such as PN6, PN10, and PN16, which denote the maximum pressure the flange can safely withstand. Design Options: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel, suitable for general applications. Flat-Faced Blind Flange: Features a flat sealing surface for low-pressure applications, ideal for ensuring a tight seal in systems with low pressure. Raised Face Blind Flange: Has a raised area around the center, providing enhanced sealing for higher-pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove for a ring-type joint gasket, used in high-pressure systems such as oil and gas pipelines. Long Weld Neck Blind Flange: Equipped with an extended neck for welding, offering additional strength and support in high-pressure or stressed systems. Nominal Diameter: DIN 2527 SS P.H. Blind Flanges are available in various nominal diameters (DN), ranging from DN10 (1/2 inch) up to DN600 (24 inches) or larger, ensuring compatibility with a wide range of piping systems and applications.

DIN 2527 Titanium Blind Flanges are specialized components used to seal the open ends of pipes, vessels, or other equipment in industrial systems where no further connection is required. Made from Titanium alloys, these flanges offer a combination of high strength, excellent corrosion resistance, and light weight, making them an ideal choice for applications in demanding environments. Manufactured according to the DIN 2527 standard, these flanges ensure high levels of dimensional accuracy, pressure tolerance, and mechanical strength, which are critical for maintaining the integrity of piping systems. Material Composition of Titanium Alloys: Titanium alloys used for DIN 2527 Blind Flanges typically include: Grade 2 Titanium (Commercially Pure Titanium): Titanium (Ti): 99.2% min Iron (Fe): 0.30% max Oxygen (O): 0.25% max Carbon (C): 0.08% max Nitrogen (N): 0.03% max Hydrogen (H): 0.015% max Grade 5 Titanium (Ti-6Al-4V): Titanium (Ti): 90.0% min Aluminum (Al): 6.0% - 7.0% Vanadium (V): 3.5% - 4.5% Iron (Fe): 0.25% max Oxygen (O): 0.20% max Carbon (C): 0.10% max Nitrogen (N): 0.05% max Hydrogen (H): 0.015% max Key Features of DIN 2527 Titanium Blind Flanges: Corrosion Resistance: Titanium is highly resistant to corrosion, especially in chloride, seawater, and acidic environments, making Titanium Blind Flanges ideal for use in marine, chemical, and offshore applications. Titanium alloys offer superior resistance to pitting, crevice corrosion, and stress corrosion cracking, even in extreme environments like high salinity and acidic conditions. High Strength-to-Weight Ratio: Titanium has an excellent strength-to-weight ratio, making it significantly stronger than many steel alloys while being much lighter. This is particularly beneficial in industries where weight reduction is essential, such as aerospace and marine industries. Temperature Resistance: Titanium alloys can withstand high temperatures, with Grade 2 Titanium performing well at up to 400°C (752°F) and Grade 5 Titanium being suitable for continuous service at up to 400°C (752°F) as well, with intermittent exposure to even higher temperatures. Dimensional Accuracy and Pressure Class: DIN 2527 Titanium Blind Flanges are manufactured to precise dimensions, ensuring a secure seal within the piping system. Available in different pressure classes such as PN6, PN10, PN16, etc., ensuring compatibility with a wide range of piping systems. Design Options: Standard Blind Flange (Type A): A solid, circular disc used to seal the end of a pipe or vessel. Commonly used in general applications. Flat-Faced Blind Flange: Features a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Includes a raised area around the center for improved sealing in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove to accommodate a ring-type joint gasket, used for high-pressure applications, particularly in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, providing additional strength and stability, commonly used in high-pressure or high-stress systems. Nominal Diameter: DIN 2527 Titanium Blind Flanges are available in a variety of nominal diameters (DN), typically ranging from DN10 (1/2 inch) up to DN600 (24 inches) or more, based on the application needs.

DIN 2527 Inconel Blind Flanges are specialized components designed to close off the ends of pipes or vessels in industrial piping systems, where no further connection is required. These blind flanges are made from Inconel alloys, a family of high-performance superalloys, known for their outstanding strength, resistance to high temperatures, and corrosion resistance in aggressive environments. The DIN 2527 standard ensures that these flanges meet the highest specifications for dimensional accuracy, pressure tolerance, and mechanical strength. Material Composition of Inconel Alloys: The primary materials used in the production of DIN 2527 Inconel Blind Flanges include Inconel 600, Inconel 625, and Inconel 718, each offering specific advantages depending on the application: Inconel 600 (Ni 72%, Cr 15%): Known for excellent resistance to oxidation and corrosion in high-temperature environments. Inconel 625 (Ni 58%, Cr 21%, Mo 9%): Offers superior resistance to pitting, stress corrosion cracking, and oxidation. Inconel 718 (Ni 50%, Cr 19%, Mo 3%, Nb 5%): Known for high strength and excellent fatigue and thermal-fatigue strength. These alloys provide superior resistance to a wide range of harsh environments, such as high-temperature oxidation, sulfuric and phosphoric acid corrosion, and chloride-induced stress corrosion cracking. Key Features of DIN 2527 Inconel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: Inconel alloys can withstand extremely high temperatures, with Inconel 600 handling temperatures up to 1093°C (2000°F), Inconel 625 up to 982°C (1800°F), and Inconel 718 capable of continuous operation at temperatures of up to 700°C (1292°F). Pressure Tolerance: Designed to endure elevated pressures, with pressure ratings available in PN6, PN10, PN16, and other standard pressure classes, ensuring safety under extreme operating conditions. Corrosion Resistance: Exceptional resistance to oxidation, scaling, and various forms of corrosion, particularly in high-temperature environments. Inconel 625 is particularly effective in marine and chemical processing environments due to its resistance to pitting and crevice corrosion. Strength and Durability: Inconel alloys exhibit outstanding mechanical strength, even at high temperatures, ensuring the structural integrity of piping systems under stress. The DIN 2527 standard defines the dimensions and design to accommodate high-stress conditions, making these flanges essential in demanding industries. Dimensional Accuracy and Pressure Class: DIN 2527 ensures precise dimensional accuracy, allowing for effective sealing and easy installation in piping systems. Available in various sizes and thicknesses, with flanges designed to meet specific pressure classes like PN6, PN10, and PN16, depending on the application. Design and Types: Standard Blind Flange (Type A): A solid, circular flange ideal for general applications. Flat-Faced Blind Flange: Features a flat sealing surface, suitable for low-pressure systems. Raised Face Blind Flange: Has a raised surface for improved sealing in higher pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed for high-pressure applications, with a groove for an RTJ gasket. Long Weld Neck Blind Flange: Offers added strength with an extended neck for welding, often used in high-pressure or stressed systems. Nominal Diameter: Available in a wide range of nominal diameters, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, to accommodate different pipe sizes and system requirements.

DIN 2527 Monel Blind Flanges are critical components used in piping systems to seal the open ends of pipes, vessels, or equipment when no further connection is needed. These blind flanges are made from Monel alloys, a group of nickel-copper-based alloys known for their exceptional corrosion resistance, especially in harsh marine and chemical environments. Monel flanges, manufactured to the DIN 2527 standard, ensure superior strength and reliability in demanding applications, making them ideal for industries such as chemical processing, marine, and power generation. Material Composition of Monel Alloys: Monel alloys are primarily composed of Nickel (Ni) and Copper (Cu), along with small amounts of other elements such as iron, manganese, and silicon. Two of the most commonly used Monel alloys in blind flange production are: Monel 400: Nickel (Ni): 63% Copper (Cu): 28-34% Iron (Fe): 2.5% max Manganese (Mn): 2.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.024% Monel K-500: Nickel (Ni): 63% Copper (Cu): 28% Aluminum (Al): 2.3-3.1% Titanium (Ti): 0.35-0.85% Iron (Fe): 2.5% max Manganese (Mn): 1.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.015% Key Features of DIN 2527 Monel Blind Flanges: Corrosion Resistance: Monel alloys are highly resistant to a wide variety of corrosive agents, including seawater, sulfuric acid, hydrochloric acid, and alkaline environments. Monel 400, in particular, is known for its excellent resistance to chloride-induced stress corrosion cracking, making it ideal for marine applications. Monel K-500 offers enhanced strength and resistance to corrosion fatigue, commonly used in more challenging environments. Temperature Resistance: Monel 400 can withstand temperatures up to 1000°F (538°C) continuously and up to 1200°F (649°C) intermittently. Monel K-500 offers high strength and resistance to oxidation and scaling in environments up to 1000°F (538°C). Mechanical Strength: Monel 400 is known for its strength and durability, especially in environments that require resistance to both high pressure and corrosion. Monel K-500 exhibits additional strength due to the presence of aluminum and titanium, making it suitable for applications under higher stresses. Dimensional Accuracy and Pressure Class: DIN 2527 Monel Blind Flanges are manufactured to precise dimensions, ensuring a secure seal in the piping system. These flanges are available in various pressure classes, such as PN6, PN10, PN16, and others, providing flexibility for different pressure ratings. Design Options: Standard Blind Flange (Type A): A solid, flat disc used to seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Features a raised surface around the center to improve sealing in high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Includes a groove for an RTJ gasket, used for high-pressure applications, often in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, offering additional strength and used in high-pressure or stressed systems. Nominal Diameter: DIN 2527 Monel Blind Flanges are available in a wide range of sizes, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, depending on system requirements.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X20Cr25Ni20 as per IS 6911 specifications. X20Cr25Ni20 is a high chromium-nickel austenitic stainless steel grade developed for superior performance at elevated temperatures. It offers outstanding resistance to oxidation, scaling, and carburization, along with good mechanical strength in aggressive industrial environments. Chemical Composition of X20Cr25Ni20 (as per IS 6911) • Carbon (C): 0.20% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 24.0% – 26.0% • Nickel (Ni): 19.0% – 22.0% Functions and Characteristics • Excellent resistance to oxidation and scaling at high temperatures • High strength retention under prolonged elevated temperature service • Superior resistance to carburization and sulfidation in aggressive atmospheres • Good corrosion resistance in oxidizing and reducing conditions • Stable austenitic microstructure ensures toughness under thermal cycling • Good formability and weldability for industrial fabrication Applications • Power Generation – Superheater tubes, reheater tubes, and boiler components • Oil and Gas – Furnace parts, flue gas handling equipment, and reformer tubes • Petrochemical Industry – Cracking units, reactors, and heat treatment fixtures • Fertilizer Plants – High-temperature vessels and chemical-handling pipelines • Chemical Industry – Heat exchangers, process reactors, and thermal equipment • Marine Engineering – Exhaust components and offshore thermal-resistant systems • Automotive Industry – Turbocharger components and exhaust manifolds • Food Processing – Thermal-resistant processing equipment and ovens • Construction – Chimney liners, refractory anchors, and high-heat structural supports • General Engineering – Valves, fasteners, and parts exposed to extreme heat Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X20Cr25Ni20, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X20Cr25Ni20 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are best suited for high-temperature industrial applications requiring superior oxidation and scaling resistance. With availability in multiple IS 6911 grades, we provide reliable stainless steel solutions tailored to diverse industries. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X15Cr24Ni13 as per IS 6911 specifications. X15Cr24Ni13 is a high chromium-nickel austenitic stainless steel grade designed to provide excellent resistance to oxidation, scaling, and corrosion at elevated temperatures. It is widely used in industries where components are exposed to high thermal stress and aggressive environments. Chemical Composition of X15Cr24Ni13 (as per IS 6911) • Carbon (C): 0.15% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 23.0% – 26.0% • Nickel (Ni): 12.0% – 15.0% Functions and Characteristics • Excellent resistance to oxidation and scaling at high temperatures • Good resistance to carburizing and sulfidizing environments • Maintains strength and structural stability in elevated temperature service • High corrosion resistance in aggressive and oxidizing environments • Good formability and weldability for complex fabrication requirements • Retains mechanical strength even under cyclic thermal conditions Applications • Power Generation – Furnace components, superheaters, and heat exchanger tubes • Oil and Gas – High-temperature processing equipment and flue gas systems • Petrochemical Industry – Reactor vessels, reformer tubes, and cracking units • Fertilizer Plants – Components exposed to aggressive chemicals at high temperature • Chemical Industry – Heat treatment fixtures, process equipment, and thermal-resistant parts • Marine Engineering – Exhaust systems and components exposed to seawater vapor • Automotive Industry – Turbocharger housings, exhaust manifolds, and catalytic converters • Food Processing – High-temperature ovens, dryers, and processing equipment • Construction – Chimney linings, structural supports, and fire-resistant structures • General Engineering – Valves, fasteners, and machinery exposed to high thermal loads Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X15Cr24Ni13, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X15Cr24Ni13 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are ideal for applications requiring superior high-temperature strength, oxidation resistance, and corrosion resistance. With availability in multiple grades under IS 6911, we provide stainless steel products that meet both domestic and international industry standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation