'strength affordability'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered solutions designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, slag buildup, and high-temperature corrosion. These shields are widely used in systems that operate under extreme thermal and mechanical stress, particularly in industries such as power generation, petrochemical processing, and waste heat recovery. The half-round design ensures easy and secure installation over straight or curved tube surfaces, helping to extend service life and reduce operational downtime. SS 304 U Type Inner Half Round Tube Shield The SS 304 U Type Inner Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which contains chromium and nickel as its primary alloying elements. This grade offers a combination of good corrosion resistance, oxidation resistance, and mechanical strength. The inner U-type configuration is specifically designed to cover the inner arc of U-bend tubes in boilers and heat exchangers, an area that typically experiences accelerated wear due to flue gas turbulence, scaling, and heat stress. • Inner U Type Half Round Tube Shield – Shields the internal curvature of U-bend tubes from corrosion, turbulent flow-induced erosion, and thermal scaling. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 304 U Type Inner Half Round Tube Shields, delivering durable and cost-effective shielding for critical industrial applications. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% • Iron (Fe): Balance Applications: Ideally suited for clean to mildly corrosive environments, including thermal and chemical plants where moderate oxidation and corrosion resistance is needed under elevated temperatures. Uses • Inner surface protection for U-bend tubes in superheaters and reheaters exposed to turbulent gas flow • Applied in return bends of waste heat recovery boilers (WHRBs) and HRSGs • Installed in curved sections of heat exchangers, steam reformers, and process heaters • Suitable for flue gas ducts, evaporators, and condensers with moderate thermal cycling • Used in chemical and refining systems where steam and mildly acidic gases are present Features • Good corrosion and oxidation resistance – Suitable for a broad range of service conditions • Inner arc coverage – Protects the inner bend area from scaling and erosion caused by turbulent flue gases • Durable performance – Offers dependable protection at temperatures up to 870°C • Precise fit – Fabricated to match the exact bend radius and tube dimensions for a secure installation • Easy mounting – Can be installed using clamps, stainless steel banding, or tack welding • Cost-effective solution – Provides a balance of performance, longevity, and affordability for standard industrial applications Applications • thermal power plants – Used in inner U-bends of superheaters and economizers to minimize scaling and erosion • petrochemical industries – Shields inside tube curves exposed to combustion gases and steam • waste heat systems – Protects internal arcs of curved tubes in WHRBs and HRSGs from slag and heat damage • chemical and refinery plants – Provides resistance against moderate levels of corrosion in return bends • industrial heating systems – Ensures extended tube life in furnaces, heat exchangers, and flue gas systems Conclusion The SS 304 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a practical and reliable solution for protecting the inner arc of U-bend tubes in moderate to high-temperature industrial environments. With its balance of corrosion resistance, mechanical durability, and ease of installation, this shield is ideal for a wide range of power and process industry applications. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 420 U Type Half Round Tube Shield The SS 420 U Type Half Round Tube Shield is manufactured from hardenable martensitic stainless steel, providing robust mechanical strength, surface hardness, and oxidation resistance in high-temperature service environments. Designed specifically for U-bend sections in heat exchangers, boilers, and superheaters, this shield offers dependable protection against scaling, thermal fatigue, and particulate erosion. The U-type configuration enables targeted shielding of both the inner and outer arcs of tube bends—critical areas where temperature gradients and gas velocity are highest. • Outer U Type Half Round Tube Shield – Protects the outer curve of U-bends from slag accumulation, flame impingement, and surface wear caused by high-velocity gas flow. • Inner U Type Half Round Tube Shield – Shields the inner arc against turbulence-induced erosion, scaling, and corrosion under thermal stress conditions. Ladhani Metal Corporation supplies SS 420 U Type Half Round Tube Shields tailored to meet the demands of thermal power, petrochemical, and process industries operating in elevated temperature ranges with limited corrosive exposure. Chemical Composition of SS 420 – Hardenable Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for systems requiring wear resistance, oxidation stability, and mechanical strength in dry, heat-intensive environments. Uses • Protection of U-bend tubes in thermal power plant superheaters and reheaters • Coverage for curved tube sections in WHRBs and HRSGs exposed to abrasive gas flow • Shielding tube bends in chemical reactors and reformers where thermal shock and particulate wear are common • Erosion prevention in return bends of condensers, evaporators, and economizers • Suitable for heat exchanger systems with low moisture and minimal chemical corrosion Features • Excellent surface hardness – SS 420 can be heat-treated for increased hardness and wear resistance, making it suitable for erosive and abrasive service. • Good oxidation resistance – Performs effectively in dry air at elevated temperatures, helping prevent surface scaling and material degradation. • Full bend protection – Offered in both inner and outer U-type forms to ensure total shielding of critical tube bend areas. • Tight and secure fit – Engineered to match tube radius and diameter, ensuring vibration-free performance and minimal exposure. • Simple installation – Can be easily mounted using banding, clamping, or light tack welding without requiring full system shutdown. • Cost-effective solution – Provides a balance of performance and affordability for moderately aggressive service conditions. Applications • thermal and captive power plants – Used on U-bends in reheaters and superheaters to combat flue gas erosion and temperature cycling. Ensures better tube life and heat retention. • refinery and process industries – Suitable for return bends in units with dry, high-temperature gas flow and minimal moisture-induced corrosion. • waste heat recovery systems – Shields U-shaped tubes in WHRBs from slag, particulate impact, and scale buildup. • cement and glass industries – Installed on high-temperature tubes exposed to solid-laden gas streams for wear resistance and surface stability. • chemical plants – Applied in select heat exchanger areas where scaling and erosion are more critical than chemical corrosion. Conclusion The SS 420 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a rugged and efficient solution for protecting U-bend tubes exposed to heat, slag, and abrasive gas flow. With its ability to resist scaling, erosion, and surface fatigue, SS 420 is ideal for industries operating in dry, high-temperature environments. Precision fit, dual-arc protection, and easy installation make these shields a valuable addition to any boiler or heat exchanger system. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2573 Carbon Steel Flanges PN 6 are robust, low-pressure plate flanges manufactured from high-quality carbon steel, specifically developed for general-purpose applications in non-corrosive to mildly corrosive environments. These flanges are designed in accordance with the DIN 2573 standard and are widely used in industrial piping systems where moderate strength and affordability are key requirements. Their simple design and ease of installation make them suitable for low-pressure fluid transfer, air, steam, and water systems across various industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, offering products that adhere to strict international quality and dimensional standards. The DIN 2573 plate flange configuration provides a secure, gasket-sealed connection, ensuring reliable performance even in basic utility and mechanical piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure applications involving air, water, oil, and non-aggressive fluids in industrial or mechanical systems. Flange Types: • Plate Flanges Flat flanges designed for easy bolting and gasket sealing, offering a reliable connection in low-pressure systems. • Flat Face (FF) Flanges Ideal for systems using cast iron or non-metallic components, these flanges provide uniform gasket compression and reduce the risk of flange distortion. • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, ensuring secure attachment and proper alignment in basic fluid and gas systems. • Custom-Machined Flanges Available in a variety of sizes and finishes, custom carbon steel flanges can be tailored to meet project-specific requirements. Carbon Steel Grades and Composition: Carbon Steel A105 (Forged) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: A105 carbon steel is commonly used for flanges in ambient and elevated temperature service, especially in oil and gas, water transmission, and mechanical systems. Its good machinability and weldability make it a cost-effective choice for general use. Carbon Steel ST37 / S235JR Composition: • Carbon (C): 0.17 – 0.20% • Manganese (Mn): ≤ 1.4% • Phosphorus (P) and Sulfur (S): ≤ 0.045% • Iron (Fe): Balance Applications: Used in structural piping, water distribution, fire protection systems, and low-pressure industrial piping. ST37/S235JR flanges offer reliable performance in applications where corrosion is minimal and pressure requirements are moderate. Applications of DIN 2573 Carbon Steel Flanges: • Water Distribution Systems: Used in water pipelines, treatment plants, and municipal systems where pressure ratings are low and material strength is sufficient. • HVAC and Utility Systems: Ideal for heating, ventilation, and cooling systems that operate under low pressure with non-corrosive fluids. • Oil and Gas (Low Pressure Segments): Applicable in low-pressure oil pipelines, tank farms, and non-critical utility lines. • General Industrial Piping: Widely used in manufacturing facilities for compressed air, inert gas lines, and general fluid handling. • Fire Protection Systems: Carbon steel flanges are commonly used in fire sprinkler systems and standpipe installations. Key Features: • Manufactured according to DIN 2573 specifications • PN 6 pressure rating for low-pressure fluid and utility applications • Excellent strength, machinability, and weldability • Cost-effective solution for non-aggressive environments • Available in A105, ST37, S235JR, and other carbon steel grades • Suitable for mechanical systems, utilities, and water transmission • Custom face finishes, drilling, and dimensions available Conclusion: DIN 2573 Carbon Steel Flanges PN 6 from Ladhani Metal Corporation offer a durable and economical choice for a wide range of low-pressure applications. Combining structural strength with manufacturing precision, these flanges are ideal for utility piping, water distribution, and general industrial use. For detailed technical support, custom dimensions, or pricing inquiries, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request

DIN 2567 Carbon Steel flanges PN 25 and PN 40 are robust threaded flanges manufactured from high-strength carbon steel, engineered to perform reliably in moderate to high-pressure applications. Built to DIN 2567 standards, these flanges offer excellent mechanical strength, durability, and thermal conductivity, making them suitable for general-purpose industrial systems such as oil and gas, water pipelines, power plants, and mechanical construction. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, delivering components that meet stringent international standards. The threaded design ensures quick, weld-free assembly, making these flanges ideal for systems requiring ease of installation and periodic disassembly. Pressure Ratings: • PN 25 (25 bar / 362 psi): Designed for industrial systems requiring strong mechanical performance and resistance to moderate pressure and temperature variations. • PN 40 (40 bar / 580 psi): Suitable for high-pressure piping systems and fluid-handling applications in power, oil & gas, and manufacturing sectors. Flange Types: • Threaded (Screwed) Flanges Allows easy installation and removal, especially in systems requiring regular maintenance. • Raised Face (RF) Flanges Enhances sealing performance under elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially when brittle or non-metallic components are involved. • Forged Threaded Flanges Provide superior strength, resistance to impact, and tight dimensional tolerances. • Custom-Machined Flanges Available in various sizes, pressure classes, and carbon steel grades as per customer specifications. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% o Applications: Widely used in oil and gas piping, power generation, valves, and fittings due to its high strength and ease of fabrication. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) o Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% o Applications: Ideal for low-temperature service in pressure vessels and pipelines, especially in cryogenic environments and cold climates. Applications of DIN 2567 Carbon Steel Flanges: • Oil & Gas Industry: Used in upstream and downstream operations, including pipelines, pressure vessels, and refineries. • Power Plants: Installed in high-pressure steam lines, water supply networks, and heat exchangers. • Water and Wastewater Systems: Suitable for potable water lines, sewage treatment, and distribution systems. • Chemical and Petrochemical Plants: Used in process piping systems carrying non-aggressive or mildly corrosive fluids. • Mechanical and HVAC Systems: Common in industrial construction for heating, ventilation, and air conditioning systems. Key Features: • Conforms to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • High tensile strength and impact resistance • Cost-effective solution for industrial and utility systems • Threaded design enables non-welded, easy assembly and maintenance • Suitable for welding, galvanizing, or surface coating • Supplied with test certificates, quality documentation, and full traceability Conclusion: DIN 2567 Carbon Steel flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for strength, affordability, and versatile performance. Ideal for use in industrial piping, mechanical assemblies, and infrastructure projects, these flanges deliver long-lasting service and simple installation. For custom dimensions, material grades, or technical inquiries, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 carbon steel flanges, designed to provide strong, reliable, and cost-effective connections in low-pressure piping systems. Manufactured in accordance with DIN 2565 standards and available in PN 6 pressure rating, these threaded flanges are ideal for non-welded piping setups, especially in maintenance-friendly or temporary installations. Carbon steel flanges offer a combination of durability, toughness, and affordability. Their versatility makes them a widely preferred choice across industries such as oil and gas, construction, power generation, water treatment, and general engineering applications. Flange Types: • Threaded (Screwed) Flanges: Designed for quick assembly without welding, ideal for applications requiring frequent dismantling or modifications. • Raised Face (RF) Flanges: Helps create a tighter seal by concentrating pressure on the gasket, minimizing leakage. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic components in low-pressure pipelines. • Forged Threaded Flanges: Forged for superior strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Tailored to meet specific customer requirements in terms of pressure class, dimensions, or material properties. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Carbon (C): ≤ 0.35% o Manganese (Mn): 0.60 – 1.05% o Phosphorus (P): ≤ 0.035% o Sulfur (S): ≤ 0.040% o Silicon (Si): 0.10 – 0.35% Applications: Widely used in pressure systems at ambient and higher temperatures. Suitable for oil & gas pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) o Designed for low-temperature service with added toughness and impact resistance. Applications: Used in cryogenic and sub-zero temperature systems, such as gas processing and cold storage piping. Applications of DIN 2565 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, valve connections, and flow systems. • Petrochemical and Refineries: Suitable for systems transporting hydrocarbons and chemicals. • Power Plants: Applied in steam, gas, and cooling water systems. • Water and Wastewater Treatment: Durable and cost-effective for fluid transport. • Structural and General Engineering: Commonly used in infrastructure, HVAC, and mechanical systems. Key Features: • Manufactured to DIN 2565 standard with PN 6 pressure rating • High mechanical strength with good ductility and toughness • Economical option for general-purpose piping systems • Easily machinable, weldable (if needed), and suitable for coatings • Delivered with test certificates, inspection reports, and material traceability Conclusion: DIN 2565 carbon steel flanges from Ladhani Metal Corporation offer dependable performance and excellent value across a wide range of applications. Known for their strength, versatility, and cost-effectiveness, these flanges are engineered to meet demanding project requirements. With strict quality control and precision manufacturing, our carbon steel flanges deliver consistent results for industrial and commercial systems. For specifications, custom requests, or bulk orders, get in touch with Ladhani Metal Corporation today.

The DIN 2558 Carbon Steel Flange PN 6 is a reliable, high-strength component designed for use in industrial piping systems that operate under moderate pressure conditions. Manufactured in accordance with DIN (Deutsches Institut für Normung) standards, these flanges are crafted from robust carbon steel, offering excellent mechanical performance, structural integrity, and cost-efficiency. Supplied by Ladhani Metal Corporation, these flanges are widely used in applications where strength, weldability, and durability are essential. Carbon steel flanges are suitable for a variety of industries including oil and gas, power generation, water treatment, construction, petrochemical, and HVAC systems. With a PN 6 pressure rating (6 bar or approximately 87 psi), these flanges are ideal for medium-pressure systems requiring a dependable, leak-proof connection. Types: Weld Neck Flange – Offers a strong, welded joint that ensures stability and leak resistance in high-load systems. Slip-On Flange – Slides easily over the pipe and is welded on both sides, making installation straightforward and cost-effective. Blind Flange – Used to seal the end of a pipe or pressure vessel, providing a secure barrier against flow. Threaded Flange – Designed for quick assembly in low-pressure systems without the need for welding. Socket Weld Flange – Ideal for smaller-diameter high-pressure lines, ensuring a smooth bore and strong weld. Common Grades & Chemical Composition: ASTM A105 (Forged Carbon Steel): Carbon (C): ≤ 0.35% Manganese (Mn): 0.60 – 1.05% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Silicon (Si): 0.10 – 0.35% Key Features: High strength and toughness; suitable for ambient- and high-temperature services; commonly used in forging pressure system components. ASTM A350 LF2 (Low-Temperature Carbon Steel): Carbon (C): ≤ 0.30% Manganese (Mn): 0.60 – 1.35% Silicon (Si): 0.15 – 0.30% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Key Features: Improved impact resistance at low temperatures; used in cryogenic and sub-zero applications. PN 6 Rating: The PN 6 pressure class corresponds to 6 bar (approximately 87 psi), making these flanges suitable for low- to medium-pressure pipelines and systems in water distribution, oil, gas, and industrial utility applications. Features: High Strength: Carbon steel provides excellent tensile and yield strength for structural stability and performance under pressure. Cost-Effective: Offers a strong balance between performance and affordability, especially for general-purpose piping systems. Good Weldability: Easily joined using standard welding techniques, making them suitable for custom pipeline fabrication. Versatile Application: Used across a wide range of sectors including petrochemical plants, power plants, and water distribution systems. Long Service Life: Durable and resistant to mechanical stress, especially when protected with coatings or galvanizing. Easy Fabrication: Can be machined and modified with ease to meet project-specific requirements. Ladhani Metal Corporation ensures that each DIN 2558 Carbon Steel Flange is manufactured with strict quality control, precision machining, and compliance with global standards. These flanges offer a practical and long-lasting solution for medium-pressure industrial piping systems where reliability, strength, and cost-efficiency are key.

DIN 2543 Monel Flanges are flanges made from Monel, a group of nickel-copper alloys that are known for their excellent corrosion resistance, particularly in marine environments and chemical processing industries. Monel alloys are also highly resistant to acidic and alkaline conditions, which makes them ideal for applications in harsh environments. Material: Typically made from Monel 400 or Monel K-500, which are the most common grades of Monel alloys. Pressure Rating (PN16): Rated for 16 bar (approximately 232 psi) at 20°C (68°F), suitable for medium-pressure systems. Key Features of DIN 2543 Monel Flanges: Corrosion Resistance: Monel alloys, especially Monel 400, are highly resistant to corrosion, including in seawater, acids, and alkaline solutions. This makes them ideal for use in marine, chemical, and offshore oil environments. Strength and Durability: Monel alloys offer high strength and excellent tensile strength even at elevated temperatures. The materials maintain their integrity and resilience in harsh environments, ensuring long-term durability. Weldability: Monel alloys are weldable, but care must be taken during the welding process to ensure that there is no loss of material properties. Proper heat treatment may be required to maintain corrosion resistance and strength. Temperature Resistance: Monel alloys have excellent performance at both high and low temperatures. They can be used in a wide range of environments, including cryogenic temperatures and elevated heat applications. Types of Monel Flanges (DIN 2543): Weld Neck Flanges (WN): These flanges have a tapered neck, which is welded to the pipe. This provides additional strength and is used in applications that require high pressure or high-temperature resistance. Slip-On Flanges (SO): These flanges slide over the pipe and are welded both inside and outside. They are easy to install and commonly used in medium-pressure systems. Blind Flanges (BL): These flanges are used to seal the end of a piping system. They prevent fluid flow and are typically used in applications where future maintenance or modifications may be required. Socket Weld Flanges (SW): These flanges have a socket in which the pipe is inserted and welded. This type is used for small-bore applications in high-pressure systems. Lap Joint Flanges (LJ): These flanges are used with a lap joint stub end and are ideal for systems that require easy alignment and disassembly. They are often used in applications where frequent maintenance is necessary. Common Monel Grades for DIN 2543 Flanges: Monel 400: Composition: Approximately 63% nickel, 29% copper, with small amounts of iron, manganese, and silicon. Properties: Exceptional resistance to corrosion, especially in seawater and other marine environments. Excellent resistance to acids and alkalines, making it suitable for chemical processing applications. High tensile strength and good mechanical properties at both high and low temperatures. Monel K-500: Composition: Similar to Monel 400, but with additional aluminum and titanium, which provide higher strength and greater resistance to corrosion. Pressure Rating (PN16): PN16 refers to the pressure rating of 16 bar (approximately 232 psi) at 20°C (68°F).

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X04Cr18Ni10Nb as per IS 6911 specifications. X04Cr18Ni10Nb is a niobium-stabilized austenitic stainless steel designed to provide superior resistance to intergranular corrosion after welding and exposure to high temperatures. The addition of niobium stabilizes the steel against carbide precipitation, ensuring long-term durability in aggressive environments. Chemical Composition of X04Cr18Ni10Nb (as per IS 6911) • Carbon (C): 0.04% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 12.0% • Niobium (Nb): ≥ 10 × C% and ≤ 1.0% Functions and Characteristics • Niobium stabilization prevents sensitization and intergranular corrosion • Excellent resistance to oxidation and scaling in high-temperature environments • Good mechanical strength and toughness across a wide temperature range • Superior weldability without risk of post-weld carbide precipitation • High corrosion resistance in oxidizing and reducing atmospheres • Non-magnetic in annealed condition, slightly magnetic after cold working Applications • Power Generation – Superheaters, heat exchangers, and boiler tubes • Oil and Gas – Welded pipelines, offshore platforms, and refinery equipment • Petrochemical Industry – Process units, reformers, and cracking systems • Fertilizer Plants – Storage tanks, pressure vessels, and corrosive pipelines • Chemical Industry – Process equipment, evaporators, and reactors • Marine Engineering – Pumps, exhaust systems, and seawater-handling equipment • Automotive Industry – Exhaust manifolds, catalytic converter parts, and clamps • Food Processing – Hygienic tanks, processing equipment, and storage systems • Construction – Structural frameworks, roofing, and cladding materials • General Engineering – Valves, fasteners, and machinery operating at high temperatures Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X04Cr18Ni10Nb, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti and other specified grades. Conclusion IS 6911 SS X04Cr18Ni10Nb sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are ideal for high-temperature and welded applications requiring superior resistance to intergranular corrosion and mechanical stability. With multiple IS 6911 grades available, we provide stainless steel solutions tailored to meet both domestic and international industry standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation