Ladhani Metal Corporation manufactures high-strength SS 420 Outer Half Round 90 Degree Bend Tube Shields engineered to protect the outer arc of 90-degree bends and U-bend tubes in boilers, superheaters, reheaters, and heat exchangers. Made from martensitic stainless steel grade SS 420, these shields provide excellent resistance to wear, scaling, and moderate corrosion. With high hardness and superior mechanical durability, SS 420 shields are ideal for protecting high-stress bend sections exposed to fly ash erosion, abrasive particulate flow, and elevated temperatures. The semi-cylindrical design is precisely formed to match the outer curvature of tube bends, delivering a close, secure fit that enhances thermal protection and structural integrity. These shields are widely used in industries requiring impact resistance and long-term durability in high-temperature service environments. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 420 Outer Half Round 90 Degree Bend Tube Shields, offering custom-made options suited to specific plant and coil requirements. SS 420 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for use in high-temperature, erosion-prone boiler environments, waste heat recovery units, and thermal process systems requiring high hardness and strength. Uses • Protection of outer U-bends and 90-degree curves in boilers and HRSGs • Applied in waste heat sections of reformers and exhaust ducts • Shields curved tube surfaces from mechanical impact and fly ash erosion • Ideal for process units where scale and soot buildup are prevalent Features • High hardness – Provides excellent wear and erosion resistance • Thermal endurance – Performs reliably under elevated temperatures • Corrosion resistance – Withstands flue gas and mildly aggressive media • Precision-engineered – Conforms to tube geometry for optimal fit • Flexible mounting – Clamp-on, weld-on, or banding as per application • Custom sizes – Offered in multiple lengths, bend radii, and thicknesses Applications • Thermal power plants – Shields high-wear tube bends in superheater and reheater sections • Waste heat boilers – Protects curved sections in ash-rich environments • Cement and pulp industries – Resists scale and gas flow damage • Petrochemical plants – Used in high-temperature convection and process coils Conclusion The SS 420 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers high-performance protection for curved tubes in demanding thermal and abrasive environments. With superior hardness, precise form, and corrosion resistance, it ensures longer service life and reduced maintenance in high-wear zones. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler tubes, heat exchanger coils, and superheaters from flue gas erosion, fly ash impact, scaling, and corrosion. These shields are widely used in power plants, industrial boilers, and waste heat recovery units to reduce tube wear, extend service life, and improve operational efficiency. Their half-round, semi-cylindrical design ensures easy installation and a secure fit over curved or straight tubes exposed to abrasive gas flow and thermal cycling. SS 430 Half Round Tube Shield for LTSH Tube The SS 430 Half Round Tube Shield is made from ferritic stainless steel grade 430, which provides good oxidation resistance, moderate corrosion protection, and excellent thermal stability. It is particularly suitable for Low Temperature Superheater (LTSH) applications where boiler tubes operate in moderately corrosive environments and are subject to ash deposition and dry gas erosion. With its high chromium content and low carbon levels, SS 430 offers a cost-effective shielding solution for boiler systems requiring dependable surface protection without the need for high nickel alloys. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 Half Round Tube Shields for LTSH applications, providing durable and economical protection in moderately corrosive and thermally demanding environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Best suited for low-temperature superheater zones and convection areas where oxidation, thermal exposure, and ash erosion are concerns in boiler and steam systems. Uses • Installed on LTSH tubes to prevent scaling, ash abrasion, and flue gas corrosion • Shields tube surfaces in HRSGs, economizers, and convection zones of WHRBs • Used in industrial and utility boilers operating in dry, oxidizing flue gas environments • Suitable for coal, biomass, or oil-fired systems with moderate corrosion potential • Applied where cost-effective surface protection is required without compromising durability Features • Good oxidation resistance – Maintains integrity under sustained thermal exposure • Cost-effective – Offers a lower-cost alternative to austenitic and molybdenum-bearing steels • Custom-fit design – Precision-fabricated to match tube radius, bend geometry, and length • Easy installation – Can be installed using clamp-on, weld-on, or banding techniques • Reduces tube wear – Protects surfaces from erosion, scaling, and soot buildup • Available in multiple dimensions and thicknesses to match application specifications Applications • thermal power plants – Installed on LTSH tube banks for long-term surface protection • waste heat recovery units – Protects return bends and convection tubes from particulate erosion • steam generation systems – Applied to shield tubes in low-temperature flue zones • industrial boilers – Guards against ash impact in biomass or coal-fired heating systems • process boilers – Enhances durability of heat exchange surfaces in oxidizing environments Conclusion The SS 430 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable and cost-efficient protection for superheater and boiler tubes in low-temperature, oxidizing environments. Its thermal stability and erosion resistance make it ideal for power and industrial systems where long-term durability and low maintenance are essential. For detailed specifications, sizing options, or technical consultation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect boiler tubes, heat exchanger coils, and superheaters from erosion, scaling, slag accumulation, and corrosive flue gases. These shields are widely used in thermal systems such as power plants, chemical processing units, and waste heat recovery boilers to improve tube longevity and reduce maintenance frequency. Their semi-cylindrical form allows easy installation on straight or curved tube surfaces in high-wear zones. SS 316 Half Round Tube Shield for LTSH Tube The SS 316 Half Round Tube Shield is manufactured from molybdenum-bearing austenitic stainless steel grade 316. Known for its excellent resistance to pitting, crevice corrosion, and chemical attack, SS 316 is ideal for environments where flue gas contains chlorides, moisture, or mildly acidic compounds. Designed specifically for Low Temperature Superheater (LTSH) applications, this shield provides critical surface protection in zones where steam is moderately superheated and tubes are exposed to ash, soot, and thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316 Half Round Tube Shields for LTSH applications, offering reliable and corrosion-resistant shielding solutions for extended tube performance. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suitable for low-temperature superheater zones exposed to corrosive ash, flue gas condensation, and thermal cycling, especially in coastal or chloride-rich environments. Uses • Installed on LTSH tubes in utility boilers to protect against acidic flue gas corrosion and soot erosion • Shields exposed tube sections in convection zones, economizers, and HRSG units • Applied in boilers using high-sulfur coal or biomass, where corrosion risks are elevated • Suitable for industrial steam systems and chemical processing units handling corrosive exhaust • Used in power plants operating in marine or high-humidity conditions Features • Superior corrosion resistance – Withstands chloride attack, acidic deposits, and moisture exposure • Thermal durability – Maintains mechanical strength and oxidation resistance under moderate heat • Custom fabrication – Manufactured to match the diameter and length of LTSH tubes for accurate fit • Easy to install – Compatible with welding, banding, or clamping methods • Reduces wear – Protects against pitting, scale buildup, and erosion in flue gas flow paths • Available in multiple thicknesses, lengths, and radii based on system design Applications • thermal power plants – Shields LTSH tubes to improve service life and efficiency • chemical plants – Applied in low-temperature zones of process boilers exposed to aggressive gases • waste heat recovery – Protects return coil sections from corrosion and erosion in WHRBs and HRSGs • industrial boilers – Guards tube surfaces in preheaters and economizers under corrosive flue conditions • steam generation systems – Used in moisture-laden or coastal plant environments requiring enhanced protection Conclusion The SS 316 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers high-performance protection for boiler and superheater tubes in corrosive, low-temperature environments. With its excellent corrosion resistance and reliable thermal performance, it ensures extended operational life and reduced maintenance in critical heat exchange systems. For technical support, customization, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, ash impact, and corrosion. Commonly applied in power plants, waste heat recovery units, and industrial heating systems, these shields help prolong tube service life and maintain consistent thermal performance. Their half-round design ensures easy installation over exposed tube surfaces and provides dependable coverage in harsh gas flow zones. SS 310 Half Round Tube Shield for LTSH Tube The SS 310 Half Round Tube Shield is fabricated from high-temperature austenitic stainless steel grade 310. Known for its high chromium and nickel content, SS 310 offers excellent oxidation resistance, superior thermal stability, and strength under prolonged heat exposure. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are vulnerable to erosion, ash buildup, and gas-phase corrosion. The shield is precisely shaped to match the outer curvature of LTSH tubes, enabling effective surface protection in relatively low-temperature flue gas environments. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 Half Round Tube Shields for LTSH tubes, offering high-performance protection in demanding thermal conditions. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Designed for low-temperature superheater zones and other areas with moderate heat and flue gas exposure, where oxidation resistance and strength are required. Uses • Installed on LTSH tubes to protect against soot erosion, scaling, and ash particle wear • Applied in convection zones of power boilers and economizers exposed to moderate heat and flue gases • Suitable for WHRBs and HRSGs where return tube surfaces are vulnerable to thermal degradation • Used in process heaters and chemical boilers operating under oxidizing conditions • Effective in gas-fired and coal-fired systems where moisture and ash corrosion is common Features • Excellent oxidation resistance – Performs well in oxidizing and mildly corrosive gas atmospheres • High-temperature strength – Resists deformation and scaling under continuous heat exposure • Custom-fit design – Precisely fabricated to match specific LTSH tube sizes and geometries • Easy installation – Can be attached using clamp-on, banding, or tack welding methods • Reduces maintenance – Protects high-wear areas from erosion and thermal stress • Available in various lengths, wall thicknesses, and radii per design requirements Applications • thermal power stations – Applied on LTSH tube surfaces to resist flue gas and ash-induced damage • waste heat recovery systems – Used in lower temperature zones of WHRBs to prevent erosion • petrochemical processing – Shields tube surfaces in heaters and exchangers from scaling • utility boilers – Protects steam superheater tubes in moderate heat and corrosive conditions • industrial steam systems – Enhances tube durability in superheaters and economizer banks Conclusion The SS 310 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable, heat-resistant solution for protecting superheater tubes in flue gas environments with moderate temperatures. Its superior resistance to scaling, oxidation, and erosion makes it ideal for maintaining the efficiency and longevity of boiler systems operating in low-temperature zones. For custom sizes, specifications, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components engineered to protect boiler, superheater, reheater, and heat exchanger tubes from high-temperature damage, erosion, slag buildup, and corrosion. These shields are commonly used in thermal power plants, petrochemical systems, waste heat recovery units, and high-temperature industrial processes where curved tube sections are frequently exposed to hot flue gases and particulate-laden flow. The half-round shape ensures quick installation and effective protection without dismantling the tube system. U Type Outer Half Round Tube Shield The U type outer half round tube shield is specifically designed to cover and protect the outer arc of U-bend tubes — the area most vulnerable to heat, gas erosion, flame impingement, and slag accumulation. These shields are manufactured in a wide variety of stainless steel and heat-resistant alloy grades to meet specific temperature, corrosion, and wear resistance requirements across various industries. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of U type outer half round tube shields in a full range of grades, offering precise fitment, durability, and reliable protection for curved tubes operating in extreme service environments. Available Grades • SS 304 – General-purpose stainless steel with good resistance to oxidation and moderate corrosion • SS 304L – Low-carbon version of SS 304 for better weldability and intergranular corrosion resistance • SS 316 – Molybdenum-enhanced alloy for superior resistance to chloride pitting and chemical corrosion • SS 316L – Low-carbon variant of SS 316 for enhanced corrosion resistance in welded conditions • SS 310 – High-temperature austenitic stainless steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 version suitable for thermal cycling and stress-resistance • SS 410 – Martensitic stainless steel with good mechanical strength and wear resistance • SS 420 – High-hardness martensitic steel for erosion-prone environments • SS 430 – Ferritic stainless steel suitable for mild oxidizing conditions and cost-effective applications • 1Cr13 – Martensitic stainless steel ideal for mechanical protection and moderate corrosion resistance • 1Cr18Ni9Ti – Titanium-stabilized alloy resistant to intergranular corrosion and heat stress • Cr23Ni13 – Austenitic heat-resistant alloy with excellent scaling and oxidation resistance • Cr25Ni20 – High-alloy grade for extreme heat and corrosive gas exposure • 1Cr25Ni20Si2 – Silicon-enhanced alloy for high-temperature stability and anti-scaling performance • 1Cr20Ni14Si2 – High-temperature grade with superior thermal fatigue and oxidation resistance Applications • Protection of U-bend outer arcs in superheaters and reheaters of thermal power plants • Shielding of curved tube sections in waste heat recovery boilers (WHRBs) and HRSGs • Flame-side defense for tube bends in petrochemical heaters, steam reformers, and exchangers • Slag and soot protection in return bends of industrial furnaces, incinerators, and kilns • Coverage for U-bend tubes in chemical and refinery plants exposed to acidic or oxidizing gases Features • Full outer arc coverage – Shields the most heat-exposed and erosion-prone section of U-bend tubes • Grade versatility – Available in multiple material options for specific temperature and corrosion demands • Excellent heat and oxidation resistance – Performance stability in conditions up to 1100°C+ depending on grade • Precision fitment – Custom-manufactured to match tube diameter, radius, and system design • Easy to install – Mountable via stainless steel bands, clamps, or tack welds without disassembly • Long-lasting durability – Reduces frequency of tube failure, improving system efficiency and safety Conclusion The U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is available in a complete range of stainless steel and heat-resistant alloy grades to suit any industrial application. These shields provide robust, reliable protection for the outer arc of U-bend tubes exposed to high temperatures, corrosive gases, and erosive flows. With grade-specific performance, precision fabrication, and simple installation, they are a proven solution for extending tube service life in critical systems. For technical support, customized dimensions, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-designed components used to protect boiler, superheater, and heat exchanger tubes from erosion, slag accumulation, scaling, and high-temperature oxidation. These shields are essential for industrial systems exposed to intense thermal cycling, high-velocity flue gases, and corrosive atmospheres. Their half-round form ensures quick and secure installation over curved or straight tube surfaces, significantly enhancing tube durability and reducing downtime. 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield is made from a high-performance austenitic stainless steel alloy containing 20% chromium, 14% nickel, and approximately 2% silicon. This alloy provides excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue, especially in oxidizing and carburizing environments. The outer U-type design is specifically intended to protect the outer arc of U-bend tubes in boilers, reformers, and heat exchangers, where flame, gas flow, and slag buildup cause the most wear. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes from flame impingement, gas erosion, slag attack, and thermal scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Outer Half Round Tube Shields, offering custom-built shielding solutions for critical high-temperature and industrial systems. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing environments in power generation, chemical processing, and furnace systems where excellent thermal and scaling resistance are required. Uses • Outer arc protection for U-bend tubes in superheaters and reheaters in thermal power plants • Shields return bends in heat exchangers and steam reformers exposed to hot gases and flame • Used in waste heat recovery boilers (WHRBs) and HRSGs to prevent surface oxidation and slag damage • Suitable for petrochemical and chemical reactors operating under oxidizing or mildly carburizing conditions • Applied in high-temperature industrial furnaces, incinerators, and reforming equipment Features • Excellent high-temperature resistance – Withstands service temperatures up to 1100°C with minimal deformation or scaling • Oxidation and corrosion resistance – High Cr-Ni-Si composition forms a stable oxide layer for prolonged exposure protection • Outer bend coverage – Provides critical protection for the most exposed and erosion-prone section of U-bend tubes • Custom fabrication – Manufactured to match exact tube radius and diameter, ensuring a precise and stable fit • Easy installation – Secured with clamps, tack welds, or stainless steel banding without disassembly • Long-lasting performance – Enhances operational life and minimizes costly tube replacements in aggressive environments Applications • thermal and power generation – Protects outer U-bend tube surfaces from slag, soot, and flue gas corrosion • petrochemical and refining – Shields return bends in reformers and heaters exposed to oxidizing and sulfur-rich gases • waste heat recovery – Guards outer tube arcs in WHRBs and HRSGs against scaling and erosion • metallurgy and cement processing – Used in high-temperature pipelines and ducts in furnaces and kilns • process heating systems – Ideal for environments involving intense flame exposure and cyclic thermal loads Conclusion The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a highly durable, heat-resistant shielding solution for protecting U-bend tube outer surfaces in extreme industrial environments. With superior resistance to oxidation, scaling, and thermal fatigue, it ensures long-term reliability and efficiency in power plants, reformers, and furnace systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler and heat exchanger tubes from surface erosion, slag deposition, scaling, and mechanical damage in high-temperature operating conditions. These shields are widely used in power plants, thermal processing units, and industrial boilers where tube surfaces face direct exposure to flue gases and abrasive particles. The half-round structure allows for easy installation over curved or straight sections, providing long-term tube protection and reducing unplanned maintenance. 1Cr13 U Type Outer Half Round Tube Shield The 1Cr13 U Type Outer Half Round Tube Shield is manufactured from 1Cr13, a martensitic stainless steel with good hardness, moderate corrosion resistance, and excellent resistance to high-temperature oxidation. This outer U-type configuration is designed to shield the outer arc of U-bend tubes where erosion, scaling, and heat-induced wear are most intense. With its balance of strength and heat resistance, 1Cr13 is suitable for service in moderately corrosive environments involving flue gas exposure and mechanical impact. • Outer U Type Half Round Tube Shield – Covers the outer curve of U-bend tubes, providing a protective barrier against gas erosion, flame impingement, and slag buildup. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr13 U Type Outer Half Round Tube Shields, offering reliable protection for industrial systems operating under high thermal and abrasive conditions. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for applications with moderate corrosion exposure and high thermal and mechanical stress, including utility boilers, heat exchangers, and furnace systems. Uses • Protection of U-bend outer arcs in superheaters and reheaters in power and utility boilers • Shielding external tube curves in economizers, waste heat recovery units, and HRSGs • Coverage for return bends in industrial exhaust systems and flue gas ducts • Ideal for process heaters, furnace tubes, and high-temperature steam lines exposed to soot, slag, and scale • Suitable for systems requiring mechanical protection and moderate corrosion resistance Features • Good mechanical strength – Martensitic structure provides resistance to wear, abrasion, and high-velocity gas flow • Moderate corrosion resistance – Chromium content offers basic protection in mildly corrosive or oxidizing environments • Thermal stability – Maintains structural integrity in high-temperature zones with consistent exposure to flue gases • Outer arc protection – Specifically designed to guard the most exposed surface of U-bend tubes • Custom fit – Manufactured to match specific tube diameters and bend radii for precise, secure installation • Easy to install – Fastened using clamps, stainless bands, or tack welds without disrupting system operation • Economical and durable – Offers a cost-effective solution for extending tube service life under moderate conditions Applications • power plants – Used on U-bend outer arcs in superheaters and economizers to resist scaling and erosion • chemical and refining industries – Shields outer tube curves in process heaters exposed to heat and mechanical wear • waste heat recovery systems – Protects U-bend surfaces from slag and particulate impact in WHRBs and HRSGs • general industrial boilers – Provides protection in high-heat flue gas paths with minimal chloride exposure • metallurgy and cement processing – Applied in return bends in heating systems exposed to high-temperature dust and gas streams Conclusion The 1Cr13 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and cost-effective solution for shielding U-bend tube outer surfaces in boilers, heat exchangers, and industrial furnace systems. With reliable mechanical strength, moderate corrosion resistance, and high-temperature performance, this shield is ideal for systems requiring durable protection in abrasive and thermally demanding conditions. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation