'short time'

Ladhani Metal Corporation offers Power Plant Boiler Tube Shields designed to protect boiler tubes in superheater, reheater, economizer, and water wall sections. Boiler tubes in power plants are exposed to extreme operating conditions including high-velocity flue gases, abrasive ash particles, soot blower impact, and high-temperature oxidation. Over time, these conditions cause tube thinning, scaling, and erosion, which can shorten boiler life and increase maintenance costs. Half round and full round shields provide a physical barrier to reduce wear, extend service life, and maintain boiler efficiency. Function of Boiler Tubes • Carry water or steam through different heating sections of the boiler • Continuously exposed to erosion, scaling, and oxidation from flue gases • Protected with shields in high-wear and soot blower impact zones to prevent premature tube failures Ladhani Metal Corporation manufactures, supplies, and exports boiler tube shields for power plants in multiple lengths, diameters, and thicknesses, catering to both domestic and international requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • Cr23Ni13 • Cr25Ni20 / 1Cr25Ni20Si2 / 1Cr20Ni14Si2 Applications: Widely used in thermal power plants, HRSGs, WHRBs, petrochemical furnaces, and industrial boilers where tubes are exposed to erosive and high-temperature conditions. Uses • Shields boiler tubes in superheater, reheater, and economizer sections • Protects against soot blower erosion and abrasive flue gases • Reduces oxidation and scaling under high-temperature operation • Extends the operational life of steam circuit components Features • High mechanical strength and durability at elevated temperatures • Excellent resistance to erosion, scaling, and oxidation • Available in multiple grades to suit different boiler environments • Custom-fabricated for precise fit and easy installation Applications • Thermal power plants – Shields superheater and reheater tubes from erosion • Waste heat recovery boilers – Guards economizer tubes in abrasive zones • HRSGs – Protects steam circuit components from high-velocity flue gases • Industrial boilers and furnaces – Provides reliable tube protection under fluctuating cycles Conclusion Power Plant Boiler Tube Shields by Ladhani Metal Corporation deliver long-lasting protection against erosion, scaling, and oxidation in the most demanding boiler environments. Available in stainless steels, heat-resistant steels, and special alloys, these shields are designed for precision fit, durability, and extended service life. Exported worldwide, they are trusted solutions for maintaining boiler performance and reducing downtime. For technical details and customized specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers Cr23Ni13 Half Round Tube Shields designed to protect boiler tubes from erosion, oxidation, and high-temperature wear in boilers, HRSGs, WHRBs, and industrial steam systems. Boiler tubes in reheater and superheater sections are continuously exposed to extreme heat, flue gases, and abrasive ash particles, which can cause severe damage and shorten their service life. Manufactured from heat-resistant stainless steel grade Cr23Ni13, these shields provide excellent high-temperature strength, oxidation resistance, and long-term stability in thermal power and industrial boilers. Function of Boiler Tubes • Carry water or steam through critical heating sections of the boiler • Exposed to scaling, erosion, and oxidation from high-temperature flue gases • Protected with Half Round Tube Shields in zones of high wear and soot blower impact Ladhani Metal Corporation manufactures, supplies, and exports Cr23Ni13 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting domestic and international requirements. Cr23Ni13 Grade Chemical Composition – Heat Resistant Stainless Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.00 – 25.00% • Nickel (Ni): 11.00 – 14.00% • Iron (Fe): Balance Applications: Suitable for use in superheater and reheater sections of thermal power plants, waste heat recovery boilers, HRSGs, and petrochemical furnaces where high creep strength and oxidation resistance are critical. Uses • Protects boiler tubes from erosion, oxidation, and soot blower impact • Shields reheater and superheater tubes in high-temperature, high-velocity gas zones • Extends service life of critical steam circuit components • Commonly used in HRSGs, WHRBs, industrial boilers, and petrochemical heaters Features • Superior resistance to oxidation and scaling at elevated temperatures • High creep strength for long-term boiler service • Stable performance under fluctuating thermal cycles • Precision-engineered design for accurate tube coverage and easy installation Applications • Power generation boilers – Reliable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes in abrasive flue gas zones • Industrial steam plants – Ensures extended service life in high-temperature operations • Petrochemical heaters – Suitable for corrosive and oxidizing boiler environments Conclusion The Cr23Ni13 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides long-lasting, high-temperature protection against erosion and oxidation in the most demanding boiler conditions. Engineered for precision fit and durability, these shields significantly extend tube service life while reducing maintenance downtime. Available in a wide range of export-ready specifications, they are trusted worldwide for consistent performance. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 410 Half Round Tube Shields designed to safeguard boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes are exposed to continuous erosion, high-temperature flue gases, and abrasive ash particles that can shorten their service life. Manufactured from martensitic stainless steel grade SS 410, these shields provide high mechanical strength, moderate corrosion resistance, and reliable oxidation resistance, making them suitable for high-temperature boiler operations. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to erosion, oxidation, and abrasive flue gases • Require Half Round Tube Shields in high-velocity and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports SS 410 Half Round Tube Shields in various lengths, diameters, and thicknesses to meet both domestic and international requirements. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.50 – 13.50% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for reheater and superheater sections in thermal power plants, waste heat recovery boilers, and industrial steam systems requiring high strength with moderate corrosion and oxidation resistance. Uses • Shields boiler tubes against erosion from high-velocity flue gases • Protects tubes from soot blower erosion and abrasive particles • Extends service life of steam circuit components in high-temperature boilers • Commonly used in utility boilers, WHRBs, HRSGs, and process boilers Features • High mechanical strength at elevated temperatures • Reliable oxidation resistance in hot boiler environments • Moderate corrosion resistance under steam and flue gas exposure • Cost-effective protection with precision-engineered fit Applications • Power generation boilers – Durable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes from high-velocity particle erosion • Industrial steam systems – Performs well in medium-to-high temperature conditions • Process boilers – Ensures extended operational life under erosive atmospheres Conclusion The SS 410 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides a strong, durable, and cost-effective solution for boiler tube protection in erosive and high-temperature environments. With high mechanical strength and reliable oxidation resistance, these shields extend tube life and minimize downtime. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Product name: Gr2 Titanium welded Tube Standard:ASTM B338 Material: GR1 GR2 GR7 GR12 Diameter:10-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr2 Titanium welded Tube Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower. Product name: Gr2 Titanium welded Tube Standard:ASTM B338 ASTMB 862 Material: GR1 GR2 GR7 GR12 Diameter:10-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled MOQ:100kgs Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.

Product Name: Titanium Anode Basket Material: Gr1, Gr2 Size: Customized Application: Anodizing Electroplating Plating Shape: Rectangular, round and spiral etc. Product Information Titanium basket has high strength, light weight, corrosion resistance and has a layer of oxide film on the surface. This film can prevent the current from passing through the titanium basket under normal electroplating conditions and make the current flow directly to the anode material in the titanium basket. There are various types of titanium baskets, including round, rectangular, and dish-shaped etc. It can also be specially designed according to the requirements of customers

Product Name: Gr12 Titanium Seamless Tube Standard: ASTM B337,ASTM B338,ASTM B861, ASTM B862 Material: Titanium Gr12 Unit Price: $25usd/kg-$40usd/kg Type: Welded/Seamless Shape: Round Outer Diameter: 3-508mm Wall Thickness: 0.1-20mm Length: Max 12000mm Surface: Bright Gr12 Titanium Seamless Tube Titanium tubes have been widely used in chemical, petroleum, petrochemical, vacuum salt making, preparation, marine engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide, etc. titanium materials are widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve pipeline corrosion problems. Place of Origin:Shaanxi, China Material:ASTM B337,ASTM B338,ASTM B861, ASTM B862 Outer Diameter:3-508mm Wall Thickness:0.2-20mm Length:Max 15Meter Standard:ASTM B861 Application:Industrial Technique:Seamless Grade:Titanium Alloy Key Words:titanium tube Type:Titanium Round Tube Certificates:SO9001:2015 Processing:Drawing Surface:Bright Finished Shape:Round.square.Rectangle Package:plywood Case Titanium grade 12 pipe (Ti-0.3Mo-0.8Ni) Chemical compositions(weight%,<=) Mo Ni Fe C N 0.2-0.4 0.6-0.9 0.30 0.08 0.03 H O Ti Others Total 0.015 0.25 Remainder 0.10 0.40 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 440 345 18 ------- Titanium is widely used in chemical industry because of its high strength, light weight, good heat transfer performance and corrosion resistance. These characteristics of titanium make it a relatively economic method to solve engineering problems related to chemical industry. Although the investment cost of titanium is higher than that of general performance materials, titanium has been widely used in the chemical industry. According to the life cycle analysis, using it can reduce the production cost by reducing maintenance, shortening downtime, increasing product quality and increasing product life.

Product name: Gr2 titanium tubes 19mm Standard:ASTM B338 Material:Titanium Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc. Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr2 titanium tubes 19mm Titanium tube has been widely used in chemical industry, petroleum, petrochemical, vacuum salt, preparation, ocean engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide and so on. Titanium materials have been widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve the problem of pipeline corrosion. Product Name Titanium tube/tubes/pipe/pipes/tubing Standard ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862 Material Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc Size(mm) Diameter 5-914*Wall thcikness 0.5*10mm*L max 16000mm Section shape Round Certification ISO9001 Surface Treatment Pickling, polished, bright finish Feature 1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic 6.Good thermal properties 7.Low Modulus of Elasticity Corrosion of titanium tubes is a serious destructive factor in industrial development. According to relevant media reports, the annual steel loss caused by corrosion is more than 10,000 tons, and the product transportation has damage and corrosive media, with dangerous factors. Therefore, the higher the requirements for titanium alloy pipe fittings. Titanium has the advantages of high strength, light weight, good heat transfer performance and corrosion resistance, and has been widely used in chemical industry. Titanium of these features make it a solution to the problem of chemical related engineering relative economic method, although the investment cost is higher than the general performance of titanium material, but titanium has been widely used in the field of chemical industry, based on life cycle analysis, can use it by reducing maintenance, shorten downtime, increase product quality and increase the product life to reduce the cost of production. Chemical Composition Grade N C H Fe O Al V Pa Mo Ni Ti Gr1 0.03 0.08 0.015 0.2 0.18 / / / / / bal Gr2 0.03 0.08 0.015 0.3 0.25 / / / / / bal Gr3 0.05 0.08 0.015 0.3 0.35 / / / / / bal Gr4 0.05 0.08 0.015 0.5 0.4 / / / / / Gr5 0.05 0.08 0.015 0.4 0.2 5.5~6.75 3.5~4.5 / / / bal Gr7 0.03 0.08 0.015 0.3 0.25 / / 0.12~0.25 / / bal Gr9 0.03 0.08 0.015 0.25 0.15 2.5~3.5 2.0~3.0 / / / bal Gr12 0.03 0.08 0.015 0.3 0.25 / / / 0.2~0.4 0.6~0.9 bal

Product Name: Titanium jigs and racks Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Titanium jigs and racks Universal jig and racks are suitable for a variety of parts and processes. The form and structure of general electroplating jigs shall be determined according to the geometry of plated parts, technical requirements of plating, process and size of equipment. Product Name:Titanium jigs and racks Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Precautions for use of titanium jigs and racks: 1. The distance from the bottom of titanium hanger to the groove bottom is 150-200mm; The concentration of working immersed electric part liquid is about 40-60mm away from the liquid level of the part. 2. The distance between titanium hanger and hanger surface is 20-40mm; And groove wall shall be greater than 50mm 3. When the titanium tools that can be used are operated manually, the loading weight is generally about 1-3kg; The position of titanium hanging rod shall be more than 80mm away from the liquid level and shall bear the whole load The features of our titanium jigs and racks: ▲ Accurate size ▲ High corrosion resistance ▲ Cost-effective ▲ Easy to load and unload ▲ Improve electrical conductivity

Product name: Gr5 titanium bar Material: Grade 5 titanium Standard : ASTM B348,ASTM B381, AMS 4928,ASTM F136 Size: Dia 5--200mm * Max L6000mm Applications :Industrial Supply status: Annealed Package: Carton or plywood case. Quality and Test : EN10204.3.1 certificate Surface:CNC machined polished MOQ : 10kgs Feature : low density, special strong strength, excellent corrosive resistance Gr5 titanium alloy bar Grade 5 titanium (Ti6Al4V) is the most common and widely used material in titanium alloys.Titanium alloys are mainly used to make aircraft engine compressor components, followed by structural components for rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys were used in the general industry for the production of electrodes for the electrolysis industry, condensers for power stations, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion resistant structural material. Gr5 titanium alloy bar is mainly divided into industrial grade, medical grade and aviation grade. The chemical composition of each grade is similar but not identical, and the physical properties are obviously different. We can provide different grade products according to customer requirements. Material: Gr5 titanium Standard : ASTM B348,AMS 4928,ASTM F136 Diameter:5mm 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 25mm 28mm 30mm 32mm 35mm 36mm 38mm 40mm 42mm 44mm 45mm 46mm 48mm 50mm etc. Length: Max L6000mm Supply status: Annealed Applications :Industrial,aviation,medical etc. Package: Carton or plywood case. Quality and Test : EN10204.3.1 certificate Surface:CNC machined polished Gr 5 titanium alloy bar / rod Chemical Composition Grade Ti C Fe H N O Al V Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min Gr 5 titanium bar / rod Mechanical Properties Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 % Equivalent Grades for Gr 5 STANDARD WERKSTOFF NR. UNS Titanium Gr. 5 3.7165 N56400