'refinery systems helping'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered solutions designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, slag buildup, and high-temperature corrosion. These shields are widely used in systems that operate under extreme thermal and mechanical stress, particularly in industries such as power generation, petrochemical processing, and waste heat recovery. The half-round design ensures easy and secure installation over straight or curved tube surfaces, helping to extend service life and reduce operational downtime. SS 304 U Type Inner Half Round Tube Shield The SS 304 U Type Inner Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which contains chromium and nickel as its primary alloying elements. This grade offers a combination of good corrosion resistance, oxidation resistance, and mechanical strength. The inner U-type configuration is specifically designed to cover the inner arc of U-bend tubes in boilers and heat exchangers, an area that typically experiences accelerated wear due to flue gas turbulence, scaling, and heat stress. • Inner U Type Half Round Tube Shield – Shields the internal curvature of U-bend tubes from corrosion, turbulent flow-induced erosion, and thermal scaling. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 304 U Type Inner Half Round Tube Shields, delivering durable and cost-effective shielding for critical industrial applications. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% • Iron (Fe): Balance Applications: Ideally suited for clean to mildly corrosive environments, including thermal and chemical plants where moderate oxidation and corrosion resistance is needed under elevated temperatures. Uses • Inner surface protection for U-bend tubes in superheaters and reheaters exposed to turbulent gas flow • Applied in return bends of waste heat recovery boilers (WHRBs) and HRSGs • Installed in curved sections of heat exchangers, steam reformers, and process heaters • Suitable for flue gas ducts, evaporators, and condensers with moderate thermal cycling • Used in chemical and refining systems where steam and mildly acidic gases are present Features • Good corrosion and oxidation resistance – Suitable for a broad range of service conditions • Inner arc coverage – Protects the inner bend area from scaling and erosion caused by turbulent flue gases • Durable performance – Offers dependable protection at temperatures up to 870°C • Precise fit – Fabricated to match the exact bend radius and tube dimensions for a secure installation • Easy mounting – Can be installed using clamps, stainless steel banding, or tack welding • Cost-effective solution – Provides a balance of performance, longevity, and affordability for standard industrial applications Applications • thermal power plants – Used in inner U-bends of superheaters and economizers to minimize scaling and erosion • petrochemical industries – Shields inside tube curves exposed to combustion gases and steam • waste heat systems – Protects internal arcs of curved tubes in WHRBs and HRSGs from slag and heat damage • chemical and refinery plants – Provides resistance against moderate levels of corrosion in return bends • industrial heating systems – Ensures extended tube life in furnaces, heat exchangers, and flue gas systems Conclusion The SS 304 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a practical and reliable solution for protecting the inner arc of U-bend tubes in moderate to high-temperature industrial environments. With its balance of corrosion resistance, mechanical durability, and ease of installation, this shield is ideal for a wide range of power and process industry applications. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 420 U Type Half Round Tube Shield The SS 420 U Type Half Round Tube Shield is manufactured from hardenable martensitic stainless steel, providing robust mechanical strength, surface hardness, and oxidation resistance in high-temperature service environments. Designed specifically for U-bend sections in heat exchangers, boilers, and superheaters, this shield offers dependable protection against scaling, thermal fatigue, and particulate erosion. The U-type configuration enables targeted shielding of both the inner and outer arcs of tube bends—critical areas where temperature gradients and gas velocity are highest. • Outer U Type Half Round Tube Shield – Protects the outer curve of U-bends from slag accumulation, flame impingement, and surface wear caused by high-velocity gas flow. • Inner U Type Half Round Tube Shield – Shields the inner arc against turbulence-induced erosion, scaling, and corrosion under thermal stress conditions. Ladhani Metal Corporation supplies SS 420 U Type Half Round Tube Shields tailored to meet the demands of thermal power, petrochemical, and process industries operating in elevated temperature ranges with limited corrosive exposure. Chemical Composition of SS 420 – Hardenable Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for systems requiring wear resistance, oxidation stability, and mechanical strength in dry, heat-intensive environments. Uses • Protection of U-bend tubes in thermal power plant superheaters and reheaters • Coverage for curved tube sections in WHRBs and HRSGs exposed to abrasive gas flow • Shielding tube bends in chemical reactors and reformers where thermal shock and particulate wear are common • Erosion prevention in return bends of condensers, evaporators, and economizers • Suitable for heat exchanger systems with low moisture and minimal chemical corrosion Features • Excellent surface hardness – SS 420 can be heat-treated for increased hardness and wear resistance, making it suitable for erosive and abrasive service. • Good oxidation resistance – Performs effectively in dry air at elevated temperatures, helping prevent surface scaling and material degradation. • Full bend protection – Offered in both inner and outer U-type forms to ensure total shielding of critical tube bend areas. • Tight and secure fit – Engineered to match tube radius and diameter, ensuring vibration-free performance and minimal exposure. • Simple installation – Can be easily mounted using banding, clamping, or light tack welding without requiring full system shutdown. • Cost-effective solution – Provides a balance of performance and affordability for moderately aggressive service conditions. Applications • thermal and captive power plants – Used on U-bends in reheaters and superheaters to combat flue gas erosion and temperature cycling. Ensures better tube life and heat retention. • refinery and process industries – Suitable for return bends in units with dry, high-temperature gas flow and minimal moisture-induced corrosion. • waste heat recovery systems – Shields U-shaped tubes in WHRBs from slag, particulate impact, and scale buildup. • cement and glass industries – Installed on high-temperature tubes exposed to solid-laden gas streams for wear resistance and surface stability. • chemical plants – Applied in select heat exchanger areas where scaling and erosion are more critical than chemical corrosion. Conclusion The SS 420 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a rugged and efficient solution for protecting U-bend tubes exposed to heat, slag, and abrasive gas flow. With its ability to resist scaling, erosion, and surface fatigue, SS 420 is ideal for industries operating in dry, high-temperature environments. Precision fit, dual-arc protection, and easy installation make these shields a valuable addition to any boiler or heat exchanger system. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304L Half Round Tube Shield The SS 304L Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304L. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The lower carbon content in SS 304L offers enhanced weldability and minimizes the risk of carbide precipitation, making it ideal for high-temperature and corrosive environments. The half-round design allows for easy installation over tubes while ensuring robust protection from flue gases, abrasives, and thermal stress. Manufactured using stainless steel grade 304L, these half-round tube shields are semi-cylindrical covers that are clamped or welded over exposed tubes. The “L” in SS 304L denotes “Low Carbon,” which offers improved resistance to sensitization during welding or prolonged exposure to elevated temperatures, making it more suitable for high-temperature and corrosive conditions compared to standard SS 304. The shields are formed with precision to ensure a snug fit over tubes and provide maximum protection without disrupting heat transfer or fluid flow. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, weldability, and performance in high-temperature service conditions. Uses – SS 304L Half Round Tube Shield • Boiler Tube Protection – Used to safeguard boiler tubes from high-temperature flue gases, ash erosion, and abrasive particles, ensuring extended service life and reduced downtime. • Heat Exchanger Tube Shielding – Protects heat exchanger tubes from corrosive process fluids and turbulent flow, helping to maintain performance and reduce maintenance frequency. • Furnace Gas Flow Wear Prevention – Installed in furnace environments where high-velocity gases and thermal cycling can cause severe tube wear, acting as a durable barrier. • Petrochemical & Refinery Applications – Shields critical tubing in high-temperature and chemically aggressive environments, improving resistance to oxidation and corrosion. Applications – SS 304L Half Round Tube Shield • Thermal Power Stations – Ideal for boiler systems and superheater tubes exposed to extreme thermal and flow conditions. • Refineries & Petrochemical Plants – Used in cracking units, reformers, and reactors where temperature and corrosion challenges are common. • Heat Recovery Steam Generators (HRSGs) – Enhances protection of tubes in combined cycle power plants and improves system reliability. • Chemical Processing Units – Prevents corrosion and surface degradation in harsh chemical flow environments. • Pulp and Paper Industry – Protects process tubes in digesters, recovery boilers, and steam-generating systems. • Industrial Boilers and Steam Systems – Ensures long-lasting tube integrity in high-pressure and high-temperature steam applications. Benefits • Extended Tube Life: Reduces repair frequency and tube replacement cycles. • Cost Efficiency: Minimizes downtime and maintenance-related expenses. • Reliable Performance: Maintains mechanical integrity under fluctuating temperatures and pressure conditions. • Sustainability: Enhances energy efficiency by maintaining consistent heat transfer performance. Conclusion The SS 304L Half Round Tube Shield by Ladhani Metal Corporation is an ideal solution for protecting critical tube systems in aggressive and high-temperature environments. Designed for high performance and long-lasting reliability, these shields help extend the lifespan of tubing systems while reducing downtime and maintenance costs. With customizable options, premium materials, and expert fabrication, Ladhani Metal Corporation is your trusted partner in tube protection solutions. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304 Half Round Tube Shield The SS 304 Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The half-round design allows for easy installation over the tubes while providing robust protection against flue gases, abrasives, and thermal stress. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, oxidation resistance, and durability in high-temperature environments. Uses Half Round Tube Shields are essential components in a wide range of thermal and mechanical systems. Their primary function is to protect exposed tube surfaces from damage caused by high-temperature operations, abrasive flow, and chemical environments. Common uses include: Boiler tube protection in thermal and power plants, where shields guard against ash erosion, slagging, and flame impingement. Shielding heat exchanger tubes from erosion and corrosion caused by turbulent gas flow and aggressive operating media. Preventing mechanical wear from high-velocity gas flow in furnace and combustion systems, especially in radiant heat zones. Providing long-term protection for high-temperature tubing in petrochemical and refinery systems, helping to reduce downtime and costly tube replacements. These shields serve as a barrier between the harsh environment and the structural tube surface, thereby improving operational safety, minimizing maintenance, and extending the service life of critical equipment. Features Ladhani Metal Corporation designs and manufactures Half Round Tube Shields with features that ensure long-term reliability, precise fit, and consistent performance even in the most challenging environments: Material: Made from high-grade stainless steel 304, offering excellent resistance to corrosion, oxidation, and heat-related stress. Design: Formed into a precise half-round shape to ensure full coverage and a secure fit over the outer curvature of tubes. Finish: Available in bright annealed, pickled & passivated, or other surface finishes as per client requirements for enhanced surface integrity and aesthetic appeal. Durability: Built with strong mechanical properties to withstand erosion, impact, and thermal cycling over prolonged use. Custom Sizes: Manufactured in a variety of thicknesses, lengths, and diameters to match specific tube dimensions and installation needs. Applications: Thermal Power Stations, where boiler tubes are continuously exposed to high heat and fly ash. Refineries and Petrochemical Plants, where process gases and liquids can be corrosive and erosive. Heat Recovery Steam Generators (HRSGs), where shields protect tubes during the waste heat recovery process. Chemical Processing Units, where exposure to reactive media necessitates strong material protection. Pulp and Paper Industry, particularly in recovery boilers and steam-generating systems. Industrial Boilers and Steam Systems that require reliable tube integrity for safe and efficient operation. These shields are critical to maintaining the integrity and efficiency of equipment in heavy-duty industrial systems. Conclusion The SS 304 Half Round Tube Shield by Ladhani Metal Corporation is a trusted solution for protecting vital tube systems in aggressive and high-temperature environments. Engineered for performance and longevity, these shields not only extend the life of your tubing systems but also minimize downtime and maintenance costs. With customizable dimensions, superior raw material, and precision forming, Ladhani Metal Corporation stands as a dependable partner for all your tube protection requirements. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X02Cr19Ni10 as per IS 6911 specifications. X02Cr19Ni10 is an ultra-low carbon austenitic stainless steel specially designed to provide superior resistance to intergranular corrosion even after welding. Its excellent combination of corrosion resistance, toughness, and weldability makes it a widely used stainless steel for critical industrial applications. Chemical Composition of X02Cr19Ni10 (as per IS 6911) • Carbon (C): 0.02% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 11.0% Functions and Characteristics • Ultra-low carbon content prevents carbide precipitation during welding • Excellent resistance to intergranular corrosion and sensitization • Superior corrosion resistance in atmospheric and chemical environments • High ductility and toughness even at cryogenic temperatures • Non-magnetic in annealed condition; may become slightly magnetic after cold working • Excellent weldability and formability for fabrication of complex structures Applications • Power Generation – Condensers, heat exchangers, and boiler components • Oil and Gas – Offshore platforms, pipelines, and processing equipment • Petrochemical Industry – Reactors, process units, and refinery components • Fertilizer Plants – Tanks, vessels, and chemical-handling pipelines • Chemical Industry – Storage tanks, piping systems, and reactors • Marine Engineering – Shipbuilding, seawater systems, and offshore structures • Automotive Industry – Exhaust manifolds, trims, and high-performance components • Food Processing – Hygienic equipment, storage tanks, and kitchenware • Construction – Architectural facades, roofing, and structural frameworks • General Engineering – Fasteners, shafts, and machine parts requiring corrosion resistance Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X02Cr19Ni10, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X02Cr19Ni10 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are the preferred choice for industries requiring excellent corrosion resistance, superior weldability, and toughness. With availability in multiple grades as per IS 6911, we deliver stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X02Cr19Ni10 as per IS 6911 specifications. X02Cr19Ni10 is an ultra-low carbon austenitic stainless steel grade, specifically designed to provide superior resistance to intergranular corrosion even after welding and exposure to high temperatures. Its excellent balance of strength, ductility, and corrosion resistance makes it one of the most versatile stainless steel grades used worldwide. Chemical Composition of X02Cr19Ni10 (as per IS 6911) • Carbon (C): 0.02% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 11.0% Functions and Characteristics • Ultra-low carbon content prevents carbide precipitation during welding • Excellent resistance to intergranular and general corrosion • High toughness and strength, even at cryogenic temperatures • Superior weldability and formability for complex structures • Non-magnetic in annealed condition, slightly magnetic when cold worked • Retains oxidation resistance up to 870°C in intermittent service Applications • Power Generation – Boiler tubes, condensers, and heat exchangers • Oil and Gas – Offshore platforms, subsea pipelines, and storage vessels • Petrochemical Industry – Process plants, refinery units, and chemical reactors • Fertilizer Plants – Corrosion-resistant pipelines and equipment for chemical handling • Chemical Industry – Tanks, vessels, and process pipelines in aggressive environments • Marine Engineering – Seawater systems, shipbuilding, and offshore structures • Automotive Industry – Exhaust manifolds, trims, and structural parts • Food Processing – Hygienic equipment, kitchenware, and storage tanks • Construction – Architectural panels, roofing, and load-bearing structures • General Engineering – Shafts, fasteners, and components requiring toughness and corrosion resistance Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X02Cr19Ni10, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X02Cr19Ni10 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, provide excellent corrosion resistance, weldability, and toughness, making them ideal for industries such as chemical, petrochemical, marine, and food processing. With availability in multiple grades as per IS 6911, we deliver stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X04Cr19Ni9 as per IS 6911 specifications. X04Cr19Ni9 is an austenitic stainless steel grade, designed with low carbon content for superior resistance to intergranular corrosion after welding. It is widely used in applications requiring excellent corrosion resistance, weldability, and hygienic properties. Chemical Composition of X04Cr19Ni9 (as per IS 6911) • Carbon (C): 0.04% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 18.0% – 20.0% • Nickel (Ni): 8.0% – 10.5% Functions and Characteristics • Low carbon content prevents carbide precipitation during welding • Excellent corrosion resistance in oxidizing environments and mild chemicals • High toughness and ductility even at cryogenic temperatures • Good oxidation resistance up to 870°C in intermittent service • Non-magnetic in annealed condition, slightly magnetic after cold working • Excellent weldability and formability for complex structures Applications • Power Generation – Heat exchangers, condensers, and boiler components • Oil and Gas – Storage tanks, pipelines, and offshore platforms • Petrochemical Industry – Process equipment, reactors, and refinery units • Fertilizer Plants – Vessels and pipelines exposed to corrosive fertilizers • Chemical Industry – Tanks, piping systems, and corrosion-resistant reactors • Marine Engineering – Shipbuilding, seawater equipment, and offshore rigs • Automotive Industry – Exhaust systems, trims, and clamps • Food Processing – Hygienic processing machinery, storage tanks, and kitchen equipment • Construction – Architectural facades, roofing, and structural frameworks • General Engineering – Shafts, fasteners, household appliances, and machine parts Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X04Cr19Ni9, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X04Cr19Ni9 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, provide exceptional corrosion resistance and weldability, making them the preferred choice for applications in chemical, food, and marine industries. With availability in multiple grades as per IS 6911, we deliver stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X07Cr18Ni9 as per IS 6911 specifications. X07Cr18Ni9 is a widely used austenitic stainless steel grade, known for its excellent corrosion resistance, high strength, and outstanding formability. It is non-magnetic in the annealed condition and is one of the most versatile and commonly used stainless steels across industries. Chemical Composition of X07Cr18Ni9 (as per IS 6911) • Carbon (C): 0.07% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.5% – 19.5% • Nickel (Ni): 8.0% – 10.5% Functions and Characteristics • Excellent corrosion resistance in atmospheric and oxidizing environments • Non-magnetic in the annealed condition, slightly magnetic when cold worked • High toughness and ductility, even at cryogenic temperatures • Excellent formability and weldability for complex fabrications • Resists oxidation at elevated temperatures up to 870°C • Hygienic, easy-to-clean surface suitable for food and pharmaceutical use Applications • Power Generation – Heat exchangers, condensers, and turbine components • Oil and Gas – Offshore equipment, piping, and storage vessels • Petrochemical Industry – Process units, reactors, and refinery equipment • Fertilizer Plants – Tanks, vessels, and corrosion-resistant pipelines • Chemical Industry – Reactors, process vessels, and storage tanks • Marine Engineering – Ship components, seawater piping, and offshore structures • Automotive Industry – Exhaust systems, trims, and fasteners • Food Processing – Hygienic equipment, storage tanks, and processing machinery • Construction – Architectural cladding, structural elements, and roofing systems • General Engineering – Shafts, fasteners, machine parts, and household appliances Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X07Cr18Ni9, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X07Cr18Ni9 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, combine corrosion resistance, strength, and versatility, making them ideal for use in industries ranging from construction to food processing. With availability in multiple grades as per IS 6911, we deliver stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X10Cr18Mn9Ni5 as per IS 6911 specifications. X10Cr18Mn9Ni5 is an austenitic stainless steel grade with a balanced composition of chromium, manganese, and nickel, designed to provide excellent corrosion resistance, high strength, and superior toughness. The addition of manganese enhances mechanical properties, while nickel stabilizes the austenitic structure, making this grade suitable for critical industrial environments. Chemical Composition of X10Cr18Mn9Ni5 (as per IS 6911) • Carbon (C): 0.10% max • Manganese (Mn): 8.0% – 10.0% • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 4.0% – 6.0% Functions and Characteristics • Excellent corrosion resistance in oxidizing and mildly reducing environments • Good resistance to intergranular corrosion and stress corrosion cracking • Manganese improves tensile strength and toughness • Retains mechanical properties at both high and low temperatures • Non-magnetic in the annealed condition with excellent weldability and formability Applications • Power Generation – Heat exchangers, boilers, and turbine components • Oil and Gas – Offshore platforms, pipelines, and subsea equipment • Petrochemical Industry – Process equipment, reactors, and refinery units • Fertilizer Plants – Components exposed to chemical corrosion and high wear • Chemical Industry – Storage tanks, pressure vessels, and process pipelines • Marine Engineering – Seawater systems, ship components, and offshore rigs • Automotive Industry – Exhaust systems, clamps, and high-performance components • Food Processing – Hygienic processing equipment and storage tanks • Construction – Structural frameworks, cladding, and architectural elements • General Engineering – Fasteners, shafts, and machine parts requiring toughness and durability Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X10Cr18Mn9Ni5, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X10Cr18Mn9Ni5 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver a unique combination of high strength, toughness, and corrosion resistance, making them ideal for applications in marine, petrochemical, and power generation industries. With availability in multiple grades as per IS 6911, we provide stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation