Product name: Grade 7 titanium tubes Standard:ASTM B338 ASTM B861 ASTM B862 Material:Titanium Gr7 Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Grade 7 Titanium Tubes Product name: Grade 7 titanium tubes Standard:ASTM B338 ASTM B861 ASTM B862 Material:Titanium Gr7 Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Dimension and Tolerance of titanium tube Outside diameter, in.(mm) Diameter tolerance, in.(mm) Permissible variations , wall thinckness, t, % in.(mm) <1 (25.4) ±0.004( ± 0.012) ±10 1-1½(25.4-38.1) ±0.005( ±0.127 ) ±10 1½-2(38.1-50.8) ±0.006( ± 0.152) ±10 2-2½(50.8-63.5) ±0.007( ± 0.178) ±10 2½-3½(63.5-88.9) ±0.010( ± 0.254) ±10 Grade 7 (Ti-0.2Pd) titanium tube Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25 The density of titanium alloy is generally about 4.51g/ cubic centimeter, only 60 of steel, the strength of pure titanium is close to the strength of ordinary steel, some high strength titanium alloy exceeds the strength of many alloy structural steel. Therefore, the specific strength (strength/density) of titanium alloy is much higher than that of other metal structural materials, as shown in Table 7-1. It can produce components with high unit strength, good rigidity and light weight. At present, titanium alloy is used for engine components, skeleton, skin, fasteners and landing gear. High thermal strength The use temperature is several hundred degrees higher than aluminum alloy, can still maintain the required strength at moderate temperature, can work for a long time at 450500 temperature these two titanium alloys still have high specific strength in the range of 150500, and aluminum alloy at 150 than the strength decreased significantly. Titanium alloys operate at temperatures up to 500, while aluminum alloys operate below 200. Good resistance to corrosion The corrosion resistance of titanium alloy is much better than that of stainless steel when working in humid atmosphere and seawater medium. Resistance to pitting corrosion, acid corrosion, stress corrosion is particularly strong; Excellent corrosion resistance to alkali, chloride, chlorine organic articles, nitric acid, sulfuric acid and so on. But titanium has poor corrosion resistance to reducing oxygen and chromite medium. Good low temperature performance Titanium alloy can keep its mechanical properties at low temperature and ultra low temperature. Titanium alloys with good low temperature performance and very low gap elements, such as TA7, can maintain certain plasticity at -253. Therefore, titanium alloy is also an important low temperature structural material.

Product Name: Titanium Plate Standard: ASTM B265 Material: GR1, GR2, GR5, GR7, GR12 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting Permissible Variations in Thickness of Cold Rolled Titanium Plate Thickness(mm) Permissible thickness tolerance(mm) (3.71 to 4.76), excl 0.36 3.33 to 3.68 0.31 2.92 to 3.30 0.25 2.51 to 2.90 0.23 2.13 to 2.49 0.2 1.85 to 2.11 0.18 1.50 to 1.83 0.15 1.04 to 1.47 0.13 0.69 to 1.02 0.1 0.43 to 0.66 0.08 0.20 to 0.41 0.05 0.15 to 0.18 0.04 0.13 0.03 Permissible Variations in Width and Length of Cold Rolled Titanium Plate Specified width.in.(mm) for Thickness under3/16 in Permissible Variations in width,in.(mm) 24 to 48（610 to 1220）excl 48(1220) and over 1/16(+1.60),-0 1/8(+3.20),-0 Specified length ft(m) Permissible Variations in length,in.(mm) Up to 10(3) Over 10 to 20(3 to 6) 1/4(+6.35),-0 1/2(+12.7),-0

Product Name: Titanium Plate Standard: ASTM B265 Material: GR1, GR2, GR5, GR7, GR12 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting Product Information: Material: GR1, GR2, GR4, GR5, GR7, GR12 Russia Grade: BT1-100,BT1-0,BT6 etc. Standard: ASTM B265 Thickness: 0.5-100mm The size of standard sheet is 5/10mm × 1000mm × 2000mm. We can also cut it as you require. Surface: Pickling, Polishing, Sand blasting etc. Type: Sheet, plate, foil; Straight & roll State: R/Y/M Thickness(mm) Permissible thickness tolerance(mm) (3.71 to 4.76), excl 0.36 3.33 to 3.68 0.31 2.92 to 3.30 0.25 2.51 to 2.90 0.23 2.13 to 2.49 0.2 1.85 to 2.11 0.18 1.50 to 1.83 0.15 1.04 to 1.47 0.13 0.69 to 1.02 0.1 0.43 to 0.66 0.08 0.20 to 0.41 0.05 0.15 to 0.18 0.04 0.13 0.03 LADHANI METAL CORPORATION, MUMBAI, INDIA Company Information Ladhani Metal Corporation. We are committed to integrate engineering steel resources in India and serve the global engineering steel market. Our company has more than 32 years of experience in steel researching, production, managing and sales. In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in India. What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want! FOR MORE DETAIL CONTACT US AT :- ladhanimetal@gmail.com ladhanimetals@gmail.com www.ladhanimetal.in www.ladhanimetal.com LADHANI METAL CORPORATION, MUMABAI, INDIA, AVAILABLE AT FOLLOWING LOCATION:- Adilabad, Agartala, Agra, Ahmedabad, Ahmednagar, Ajmer, Akola , Aligarh , Alipore , Allahabad , Alleppey , Almora , Alwar , Alwaye , Amalapuram , Amaravati , Ambala , Amreli , Amritsar , Anakapalle , Anand , Anantapur , Andhra Pradesh , Anna Road , Arakkonam , Arunachal Pradesh , Asansol , Aska , Assam , Aurangabad , Azamgarh , Bagalkot , Bahraich , Balaghat , Balangir , Balasore , Ballia , Banasanktha , Banda , Bangalore , Bankura , Barabanki , Barabazaar , Baramulla , Barasat , Bardoli , Bareilly , Barmer , Bastar , Basti , Beawar , Beed , Begusarai , Belgaum , Bellary , Berhampur , Bhadrak , Bhagalpur , Bharatpur , Bharuch , Bhatinda , Bhavnagar , Bhilwara , Bhimavaram , Bhiwani , Bhojpur , Bhopal , Bhubaneswar , Bhusaval , Bidar , Bihar , Bijapur , Bijnor , Bikaner , Bilaspur , Birbhum , Budaun , Bulandshahar , Buldana , Burdwan , Cachar , Calcutta , Calicut , Cannanore , Chamba , Chamoli , Chandigarh , Chandrapur , Changanacherry , Channapatna , Chattisgarh , Chengalpattu , Chennai , Chhatarpur , Chhindwara , Chikmagalur , Chikodi , Chitradurga , Chittoor , Chittorgarh , Churu , Coimbatore , Contai , Cooch Behar , Cuddalore , Cuddapah , Cuttack , Darbhanga , Darjeeling , Darrang , Dehra Gopipur , Dehradun , Delhi , Delhi , Deoria , Dhanbad , Dharamsala , Dharmanagar , Dharmapuri , Dharwad , Dhenkanal , Dholpur , Dhule , Dibrugarh , Dinajpur , Dindigul , divisionname , Dungarpur , Durg , Eluru , Ernakulam , Erode , Etah , Etawah , Faizabad , Faridabad , Faridkot , Fatehgarh , Fatehpur , Ferozpur , Gadag , Gandhinagar , Gaya , Ghaziabad , Ghazipur , Giridih , Goa , Goalpara , Gokak , Gonda , Gondal , Gorakhpur , Gudivada , Gudur , Gujarat , Gulbarga , Guna , Guntur , Gurdaspur , Gurgaon , Guwahati , Gwalior , Hamirpur , Hanamkonda , Hardoi , Haryana , Hassan , Haveri , Hazaribagh , Himachal Pradesh , Hindupur , Hissar , Hooghly , Hoshangabad , Hoshiarpur , Howrah , Hyderabad , Idukki , Indore , Irinjalakuda , Jabalpur , Jaipur , Jalandhar , Jalgaon , Jalpaiguri , Jammu , Jammu kashmir , Jamnagar , Jaunpur , Jhansi , Jharkhand , Jhunjhunu , Jodhpur , Junagadh , Kakinada , Kalahandi , Kanchipuram , Kanniyakumari , Kanpur , Kapurthala , Karaikudi , Karimnagar , Karnal , Karnataka , Karur , Karwar , Kasaragod , Keonjhar , Kerala , Khammam , Khandwa , Kheda , Kheri , Kodagu , Kolar , Kolhapur , Kolkata , Koraput , Kota , Kottayam , Kovilpatti , Krishnagiri , Kumbakonam , Kurnool , Kurukshetra , Kutch , Lakshadweep , Leh , Lucknow , Ludhiana , Machilipatnam , Madhubani , Madhya Pradesh , Madurai , Mahabubnagar , Maharashtra , Mahesana , Mainpuri , Malda , Malegaon , Mandi , Mandsaur , Mandya , Mangalore , Manipur , Manjeri , Mathura , Mavelikara , Mayiladuthurai , Mayurbhanj , Medak , Meerut , Meghalaya , Midnapore , Mirzapur , Mizoram , Monghyr , Moradabad , Morena , Mumbai , Murshidabad , Muzaffarnagar , Muzaffarpur , Mysore , Nadia , Nagaland , Nagaon , Nagapattinam , Nagaur , Nagpur , Nainital , Nalanda , Nalbari , Nalgonda , Namakkal , Nanded , Nandyal , Nanjangud , Narasaraopet , Nasik , Navsari , Nawadha , Nellore , New Delhi , New Mumbai , Nilgiris , Nizamabad , North Eastern , Odisha , Osmanabad , Ottapalam , Palamau , Palghat , Pali , Panchmahals , Pandharpur , Parvathipuram , Patan , Pathanamthitta , Patiala , Patna , Pattukottai , Pauri , Peddapalli , Pharbhani , Phulbani , Pithoragarh , Pollachi , Pondicherry , Porbandar , Prakasam , Pratapgarh , Proddatur , Pudukkottai , Pune , Punjab , Puri , Purnea , Purulia , Puttur , Quilon , Rae Bareilly , Raichur , Raigad , Raigarh , Raipur , Rajahmundry , Rajasthan , Rajkot , Rajouri , Ramanathapuram , Rampur Bushahr , Ranchi , Ratlam , Ratnagiri , Rewa , Rohtak , Rohtas , Sabarkantha , Sagar , Saharanpur , Saharsa , Salem , Samastipur , Sambalpur , Sangareddy , Sangli , Sangrur , Santhal Parganas , Saran , Satara , Sawaimadhopur , Secunderabad , Sehore , Shahdol , Shahjahanpur , Shimla , Shimoga , Shrirampur , Sibsagar , Sikar , Sikkim , Sindhudurg , Singhbhum , Sirohi , Sirsi , Sitamarhi , Sitapur , Sivaganga , Siwan , Solan , Solapur , Sonepat , Sriganganagar , Srikakulam , Srinagar , Srirangam , Sultanpur , Sundargarh , Surat , Surendranagar , Suryapet , Tadepalligudem , Tambaram , Tamilnadu , Tamluk , Tehri , Tenali , Thalassery , Thane , Thanjavur , Theni , Tinsukia , Tiruchirapalli , Tirunelveli , Tirupati , Tirupattur , Tirupur , Tirur , Tiruvalla , Tiruvannamalai , Tonk , Trichur , Trivandrum , Tumkur , Tuticorin , Udaipur , Udhampur , Udupi , Ujjain , Una , Uttar Pradesh , Uttarakhand , Vadakara , Vadodara , Vaishali , Valsad , Varanasi , Vellore , Vidisha , Vijayawada , Virudhunagar , Visakhapatnam , Vizianagaram , Vriddhachalam , Wanaparthy , Warangal , Wardha , West Bengal , Yeotmal , Bangalore , Hyderabad , Chennai , Kolkata , Jaipur , Indore , Thane , Pimpri-Chinchwad , Nashik , Kalyan-Dombivli , Vasai-Virar , Varanasi , Navi Mumbai , Hubli–Dharwad , Tiruchirappalli , Tiruppur , Salem , Mira-Bhayandar , Bhiwandi , Amravati , Noida , Jamshedpur , Bhilai , Cuttack , Firozabad , Kochi , Durgapur , Rourkela , Loni , Siliguri , Ulhasnagar , Sangli-Miraj & Kupwad , Ambattur , Thiruvananthapuram , Davanagere , Kozhikode , Maheshtala , Rajpur Sonarpur , Bokaro , South Dumdum , Gopalpur , Bhatpara , Panihati , Latur , Korba , Kollam , Avadi , Kadapa , Kamarhati , Rampur , Thrissur , Bardhaman , Kulti , Parbhani , Ozhukarai , Bihar Sharif , Panipat , Bally , Aizawl , Dewas , Ichalkaranji , Bathinda , Jalna , Kirari Suleman Nagar , Purnia , Satna , Mau , Sonipat , Farrukhabad , Imphal , Hapur , Arrah , Ambarnath , North Dumdum , New Delhi , Gandhidham , Baranagar , Tiruvottiyur , Thoothukudi , Ramagundam , Silchar , Haridwar , Vijayanagaram , Nagercoil , Sri Ganganagar , Karawal Nagar , Mango , Bulandshahr , Uluberia , Katni , Sambhal , Singrauli , Nadiad , Naihati , Yamunanagar , Bidhannagar , Pallavaram , Munger , Panchkula , Burhanpur , Raurkela Industrial Township , Kharagpur , Hospet , Nangloi Jat , Ongole , Deoghar , Chapra , Haldia , Amroha , Bhind , Bhalswa Jahangir Pur , Madhyamgram , Berhampore , Morbi , Raebareli , Khora, Ghaziabad , Bhusawal , Orai , Phusro , Mehsana , Raiganj , Sirsa , Danapur , Serampore , Sultan Pur Majra , Panvel , Shivpuri , Surendranagar Dudhrej , Unnao , Chinsurah , Alappuzha , Adoni , Katihar , Mahbubnagar , Jorhat , Sasaram , Hajipur , Bongaigaon , Dehri , Madanapalle , Bettiah , Ramgarh , Guntakal , Motihari , Dharmavaram , Medininagar , Phagwara , Hosur , Miryalaguda , Tadipatri , Kishanganj , Jamalpur , Kavali , Buxar , Tezpur , Jehanabad , Gangtok , Assam , Bihar , Chattisgarh , Delhi , Gujarat , Haryana , Himachal Pradesh , Jammu kashmir , Jharkhand , Karnataka , Kerala , Madhya Pradesh , Maharashtra , Odisha , Punjab , Rajasthan , Tamilnadu , Uttar Pradesh , Uttarakhand , west Bengal WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen , Zambia , Zimbabwe , Estonia , Nepal

QUALITU STANDARD MATERIAL NO. OLD DESIGNATION DC03 DIN EN 10130 1.0347 St 13-03 The deep drawing grade DC03 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard defines the technical requirements and test methods for cold-rolled products used in various industrial applications, particularly where high demands are placed on surface quality and mechanical properties. DC03 is a low-carbon steel characterized by excellent cold formability. The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur. This small amount of alloying elements contributes to the good formability and weldability of the steel. The mechanical properties of DC03 are also clearly defined. The material has a yield strength of at least 140 MPa and a tensile strength of between 270 and 370 MPa. In addition, DC03 has an elongation at break of at least 34%, which underlines its excellent formability. These properties make DC03 particularly suitable for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or household appliances. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the deep-drawing grade DC03. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC03, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC03 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC03 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC03. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC03 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the deep-drawing grade DC03 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC03 is a reliable and high-quality material for numerous industrial applications. Cold-rolled flat steel DC03, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC03 is a versatile material with high quality and durability.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316 U Type Half Round Tube Shield The SS 316 U Type Half Round Tube Shield is specifically designed to protect U-bend sections in superheaters, reheaters, and heat exchanger coils. Manufactured from SS 316, a molybdenum-bearing austenitic stainless steel, it offers enhanced resistance to pitting, crevice corrosion, and chloride-induced attack. The U-type design ensures precise coverage over tube bends, where erosion and heat damage are most intense. Both inner and outer U configurations are available for comprehensive protection. • Outer U Type Half Round Tube Shield – Protects the outer curvature of the U-bend from flame impingement, slag buildup, and high-velocity gas erosion. • Inner U Type Half Round Tube Shield – Shields the inner arc of the bend against turbulence-induced wear, localized corrosion, and scaling. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 316 U Type Half Round Tube Shields, delivering high-performance solutions for industries requiring superior corrosion resistance and heat tolerance. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Best suited for environments with exposure to chlorides, steam, and acidic gases, where resistance to corrosion and heat is critical. Uses • Protection of U-bend tubes in high-temperature boiler coil sections • Shielding tube bends in chemical heat exchangers and steam reformers • Coverage for WHRB tube bends exposed to abrasive flue gas streams • Safeguarding curved tubes in condensers, superheaters, and evaporators • Ideal for corrosive and chloride-laden environments in marine or coastal installations Features • Excellent corrosion resistance – Made from SS 316 with molybdenum, offering superior protection against pitting, crevice corrosion, and acidic gas exposure. • High-temperature performance – Performs reliably in high-heat environments, withstanding oxidation and thermal stress during prolonged operation. • Dual-side coverage – Available in both inner and outer U-type configurations for full protection of return bends in heat exchanger and boiler systems. • Precision fitment – Custom-fabricated to match tube radius and diameter for a tight, secure fit that prevents movement and surface exposure. • Easy to install – Designed for quick and secure mounting using clamps, tack welds, or banding without requiring system disassembly. • Custom dimensions – Available in a wide range of lengths, thicknesses, and tube radii to meet exact design and performance requirements. Applications • thermal power plants – Used on U-bend tubes in superheaters and reheaters to resist flue gas corrosion and scaling. Enhances service life and reduces downtime in high-temperature zones. • petrochemical plants – Shields tube bends in steam reformers and exchangers exposed to chlorides and process gases. Provides robust corrosion protection in aggressive chemical environments. • waste heat recovery systems (WHRBs) – Protects curved tubes in exhaust gas streams from slag erosion and thermal shock. Improves long-term durability under fluctuating temperatures and gas flow. • chemical and fertilizer industries – Installed on tube bends in reactors and ammonia reformers for corrosion and erosion resistance. Helps prevent pitting and degradation from acidic and chloride-containing media. • HRSGs and industrial boilers – Used in return bends to prevent surface scaling and heat-induced fatigue. Maintains structural integrity and energy efficiency in cyclic operating conditions. Conclusion The SS 316 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a dependable solution for protecting U-bend tubes in corrosive and high-temperature environments. Its superior resistance to chlorides, acids, and oxidizing gases makes it ideal for petrochemical, power, and chemical industries. Designed for durability, precision fit, and ease of installation, these shields are fully customizable to your specific system requirements. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

What is a Half Round Tube Shield? A Half Round Tube Shield is a specially designed metal cover that fits over the external curvature of tubes or pipes. It is commonly used in boilers, heat exchangers, and various high-temperature piping systems to prevent damage caused by erosion, corrosion, high-velocity gas flow, and thermal fatigue. These shields serve as a first line of defense by absorbing mechanical and chemical wear, thereby significantly extending the life of the underlying tubes. Tube shields are essential in high-stress areas where exposure to combustion gases, ash particles, or high-velocity steam can quickly degrade unprotected surfaces. By preventing direct impact on the base metal, they help reduce operational downtime, lower maintenance costs, and prevent unexpected system failures. In boiler systems, tube shields are especially important to avoid tube thinning and ruptures, ensuring safer and more efficient operation. Product Overview At Ladhani Metal Corporation, we manufacture and supply premium-quality Half Round Tube Shields for a wide range of industrial applications. Our products are known for their dimensional accuracy, durability, and superior resistance to wear and corrosion. Designed for harsh operating environments, our tube shields can be customized in terms of thickness, radius, length, and grade to suit specific operating requirements. Whether you require protection for straight tubes, bends, or special boiler tube configurations, we have a solution tailored for you. Available Grades We manufacture Half Round Tube Shields using high-performance stainless steel and alloy steel grades that are selected based on their mechanical strength, temperature tolerance, and corrosion resistance. Stainless Steel Grades: • SS 304, SS 304L • SS 316, SS 316L • SS 310, SS 310S • SS 410, SS 420, SS 430 Heat-Resistant & Alloy Steel Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 These materials ensure the shields can withstand aggressive media, thermal cycling, and high-velocity particulate flow without cracking or deforming over time. Types of Half Round Tube Shields We offer various forms of Half Round Tube Shields to match different tube geometries and boiler configurations: • U-Type Half Round Tube Shield Designed to cover both the top and sides of the tube, offering extended protection in U-bend areas where wear is most common. • U-Type Outer Half Round Tube Shield Specifically shaped to shield the outer curvature of U-bend tubes, ideal for areas exposed to direct flame or gas flow. • U-Type Inner Half Round Tube Shield Fits the inner curvature of U-bend tubes to protect against erosion caused by high-velocity media turning around the bend. • Half Round Tube Shield for LTSH Type Custom-made to fit tubes in Low Temperature Super Heater (LTSH) sections, providing protection from ash and flue gases. • Half Round Straight Tube Shield Standard half-round shields used for straight tube sections, offering easy installation and effective protection. • Half Round Tube Shield for R/H Tube Designed for Reheater (R/H) tubes, typically found in high-temperature zones; made from heat-resistant materials. • Half Round Shield for Tube A general-purpose shield suitable for various industrial tubes requiring surface protection. • Half Round Tube Shield for WW Screen Engineered to fit water wall screen tubes, protecting against slagging and high radiant heat. • Half Round Tube Shield for Boiler Tube Specifically designed for boiler applications, these shields reduce wear cau Each type is designed for easy integration into existing boiler or piping systems, whether for repair, reinforcement, or preventive maintenance. Key Features ✔ High Durability – Effectively resists erosion, mechanical abrasion, scaling, and chemical attack ✔ Accurate Half-Round Fit – Custom-formed to ensure close contact and full protection of tube surface ✔ Weld-On or Clip-On Installation – Offers flexibility based on site requirements and installation methods ✔ Custom Sizes Available – Tailored to meet specific pipe diameters, wall thicknesses, and operating conditions ✔ Corrosion & Heat Resistance – Performs reliably under prolonged exposure to high temperatures and corrosive flue gases Conclusion Half Round Tube Shields by Ladhani Metal Corporation provide robust protection for critical tubing in boilers, heat exchangers, and high-temperature piping systems. Manufactured with a focus on performance, longevity, and ease of installation, these shields are a dependable solution for industrial operators aiming to enhance system reliability and reduce unplanned maintenance. 📩 Get in touch with us today for customized solutions, bulk order pricing, or technical consultations tailored to your specific industry requirements.

DIN 2527 Carbon Steel (C.S.) Blind Flanges are designed to seal the ends of pipes or vessels in industrial piping systems where no further connection is required. These blind flanges are made from carbon steel, which is known for its strength, durability, and cost-effectiveness. The DIN 2527 standard ensures that these flanges meet precise dimensional and mechanical requirements for reliability under various industrial conditions. Material Composition of Carbon Steel (C.S.) Blind Flanges: The material used in DIN 2527 carbon steel blind flanges typically includes carbon steel grades like St 37, St 52, or A105, which are commonly used for pressure-containing parts in piping systems. The general composition of carbon steel includes: Carbon (C): 0.05% to 0.25% – Provides strength and hardness. Manganese (Mn): 0.30% to 0.90% – Enhances toughness and strength. Silicon (Si): 0.10% to 0.60% – Adds strength and hardness. Phosphorus (P): Up to 0.04% – Ensures better toughness and workability. Sulfur (S): Up to 0.05% – Keeps the material ductile and machinable. Iron (Fe): The remainder of the material – Makes up the base composition. These carbon steel grades provide excellent mechanical properties, such as strength, ductility, and weldability, making them suitable for a wide range of applications in moderate temperature and pressure environments. Key Features of DIN 2527 Carbon Steel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: Carbon steel can withstand temperatures up to 400°C (752°F) without significant degradation. It is ideal for moderate temperature applications. Pressure Tolerance: DIN 2527 carbon steel blind flanges come with pressure ratings such as PN6, PN10, PN16, PN25, and higher, ensuring they can safely handle pressure in piping systems. Corrosion Resistance: Carbon steel is not highly resistant to corrosion, especially in moisture, chlorides, or acidic environments. To enhance the corrosion resistance, these flanges can be galvanized or coated (with zinc or paint), which helps in increasing their durability in mildly corrosive environments. Strength and Durability: Carbon steel offers high strength and good toughness under moderate stress and pressure conditions. It is stronger than mild steel, providing a reliable seal for general industrial use. Dimensional Accuracy and Pressure Class: The DIN 2527 standard ensures precise dimensional accuracy, enabling easy and reliable installation. Carbon steel blind flanges come in different pressure ratings like PN6, PN10, PN16, and PN25, providing flexibility based on the system's pressure requirements. Design and Types of DIN 2527 Carbon Steel Blind Flanges: Standard Blind Flange (Type A): A solid circular flange used for general isolation of pipeline sections where no further connection is needed. Flat-Faced Blind Flange: This flange features a flat sealing surface, making it suitable for low-pressure systems or applications where a tight seal is not required. Raised Face Blind Flange: Has a raised surface for a better seal in medium-to-high-pressure systems, where the flange is bolted to a matching raised face of another flange. Ring-Type Joint (RTJ) Blind Flange: Used in high-pressure systems, this flange has a groove that holds an RTJ gasket, offering a superior seal under high-pressure conditions. Long Weld Neck Blind Flange: Features an extended neck for welding to the pipe, providing additional strength and making it suitable for high-pressure or high-stress applications. Nominal Diameter: Available in a wide range of nominal diameters (e.g., DN10, DN50, DN150, DN600), ensuring compatibility with different pipe sizes and system requirements.

DIN 2527 Titanium Blind Flanges are specialized components used to seal the open ends of pipes, vessels, or other equipment in industrial systems where no further connection is required. Made from Titanium alloys, these flanges offer a combination of high strength, excellent corrosion resistance, and light weight, making them an ideal choice for applications in demanding environments. Manufactured according to the DIN 2527 standard, these flanges ensure high levels of dimensional accuracy, pressure tolerance, and mechanical strength, which are critical for maintaining the integrity of piping systems. Material Composition of Titanium Alloys: Titanium alloys used for DIN 2527 Blind Flanges typically include: Grade 2 Titanium (Commercially Pure Titanium): Titanium (Ti): 99.2% min Iron (Fe): 0.30% max Oxygen (O): 0.25% max Carbon (C): 0.08% max Nitrogen (N): 0.03% max Hydrogen (H): 0.015% max Grade 5 Titanium (Ti-6Al-4V): Titanium (Ti): 90.0% min Aluminum (Al): 6.0% - 7.0% Vanadium (V): 3.5% - 4.5% Iron (Fe): 0.25% max Oxygen (O): 0.20% max Carbon (C): 0.10% max Nitrogen (N): 0.05% max Hydrogen (H): 0.015% max Key Features of DIN 2527 Titanium Blind Flanges: Corrosion Resistance: Titanium is highly resistant to corrosion, especially in chloride, seawater, and acidic environments, making Titanium Blind Flanges ideal for use in marine, chemical, and offshore applications. Titanium alloys offer superior resistance to pitting, crevice corrosion, and stress corrosion cracking, even in extreme environments like high salinity and acidic conditions. High Strength-to-Weight Ratio: Titanium has an excellent strength-to-weight ratio, making it significantly stronger than many steel alloys while being much lighter. This is particularly beneficial in industries where weight reduction is essential, such as aerospace and marine industries. Temperature Resistance: Titanium alloys can withstand high temperatures, with Grade 2 Titanium performing well at up to 400°C (752°F) and Grade 5 Titanium being suitable for continuous service at up to 400°C (752°F) as well, with intermittent exposure to even higher temperatures. Dimensional Accuracy and Pressure Class: DIN 2527 Titanium Blind Flanges are manufactured to precise dimensions, ensuring a secure seal within the piping system. Available in different pressure classes such as PN6, PN10, PN16, etc., ensuring compatibility with a wide range of piping systems. Design Options: Standard Blind Flange (Type A): A solid, circular disc used to seal the end of a pipe or vessel. Commonly used in general applications. Flat-Faced Blind Flange: Features a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Includes a raised area around the center for improved sealing in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove to accommodate a ring-type joint gasket, used for high-pressure applications, particularly in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, providing additional strength and stability, commonly used in high-pressure or high-stress systems. Nominal Diameter: DIN 2527 Titanium Blind Flanges are available in a variety of nominal diameters (DN), typically ranging from DN10 (1/2 inch) up to DN600 (24 inches) or more, based on the application needs.