'new metal material'

WE LADHANI METAL CORPORATION ARE THE EXPORTER OF EN 10152 DC07 SHEET, PLATE AND COIL QUALITY- DC07 STANDARD- DIN EN 10152 MATERIAL NO.- 1.0898 Super deep drawing grade DC07 according to DIN EN 10152 The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled steel flat products for cold forming, including the super deep-drawing grade DC07. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC07, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC07 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC07 therefore retains its exceptional cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for non-galvanized DC07. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC07 in accordance with DIN EN 10152 is widespread in the automotive industry, the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. AVAILABLE AT FOLLOWING LOCATION :- Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana, Agra,Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad,Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai,Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar ,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli,Belgaum,Mangalore, Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen , Zambia , Zimbabwe

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

WE LADHANI METAL CORPORATION ARE THE SUPPLIER OF EN 10152 DC06 SHEET, PLATE AND COIL QUALITY- DC06 STANDARD- DIN EN 10152 MATERIAL NO.-1.0873 Special deep-drawing grade DC06 according to DIN EN 10152 The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the special deep-drawing grade DC06. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC06, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC06 remain unchanged even after galvanizing and meet the requirements of DIN EN 10130. DC06 therefore retains its outstanding cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC06. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC06 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. AVAILABLE AT FOLLOWING LOCATION :- Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana, Agra,Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad,Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai,Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar ,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli,Belgaum,Mangalore, Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana, Agra,Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad,Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai,Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar ,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli,Belgaum,Mangalore, Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

WE LADHANI METAL CORPORATION DEALS IN EN 10152 DC05 SHEET, PLATE AND COIL QUALITY- DC05 STANDARD- DIN EN 10152 MATERIAL NO.- 1.0312 OLD DESIGNATION- ST15-03 Special deep-drawing grade DC05 according to DIN EN 10152 The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the special deep-drawing grade DC05. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC05, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC05 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC05 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC05. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC05 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. AVAILABLE AT FOLLOWING LOCATION :- Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana, Agra,Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad,Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai,Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar ,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli,Belgaum,Mangalore, Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

WE LADHANI METAL CORPORATION ARE THE EXPORTER OF EN 10152 DC04 SHEET, PLATE AND COIL QUALITY- DC04 STANDARD- DIN EN 10152 MATERIAL NO.- 1.0338 OLD DESIGNATION- ST 14-03 Special deep-drawing grade DC04 according to DIN EN 10152 The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the special deep-drawing grade DC04. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC04, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC04 remain unchanged even after galvanizing and meet the requirements of DIN EN 10130. DC04 therefore retains its excellent cold formability and mechanical performance. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC04 in accordance with DIN EN 10152 is widespread in the automotive industry, the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. Comparison: Cold-rolled steel DC04 vs. DC01 DC04 and DC01 are both cold-rolled, unalloyed quality steels that are used for various industrial applications. While DC01 serves as the standard grade for general cold forming processes, DC04 is characterized by improved deep-drawing properties and higher ductility. This comparison highlights the differences between the two materials in terms of chemical composition, mechanical properties and typical applications. Chemical composition The chemical composition influences the formability and weldability of the steel. Both steels are made of carbon steel, but DC04 has a lower carbon content, which supports its improved cold formability. Thanks to the lower carbon and sulphur content, DC04 offers improved deep-drawing capability as less intergranular embrittlement occurs. AVAILABLE AT FOLLOWING LOCATION :- Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana, Agra,Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad,Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai,Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar ,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli,Belgaum,Mangalore, Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

WE LADHANI METAL CORPORATION ARE THE SUPPLIER OF EN 10152 DC03 SHEET, PLATE AND COIL QUALITY-DC03 STANDARD-DIN EN 10152 MATERIAL NO.-1.0347 OLD DESIGNATION-ST 13-03 Deep-drawing quality DC03 according to DIN EN 10152 The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the deep-drawing grade DC03. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC03, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC03 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC03 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC03. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC03 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. AVAILABLE IN FOLLOWING CITIES: Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana, Agra,Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad,Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai,Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar ,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli,Belgaum,Mangalore, Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen , Zambia

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

WE LADHANI METAL CORPORATION ARE THE SUPPLIER OF EN 10152 DC01 SHEET, PLATE AND COIL QUALITY STANDARD MATERIAL NO. OLD DESIGNATION DC01 DIN EN 10152 1.033 ST 12-03 Cold-rolled flat steel DC01, according to the standard DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standard DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. WE CAN ALSO SUPPLY IN DIFFERENT PARTS OF INDIA LIKE: Mumbai,Delhi,Bangalore,Hyderabad,Ahmedabad,Chennai,Kolkata,SuraT,Pune,Jaipur,Lucknow,Kanpur,Nagpur,Indore,Thane,Bhopal,Visakhapatnam,Patna,Vadodara,Ghaziabad,Ludhiana,Agra, Nashik,Faridabad,Meerut,Rajkot,Kalyan,Vasai,Varanasi,Srinagar,Aurangabad,Dhanbad, Amritsar,Allahabad,Ranchi,Haora,Coimbatore,Jabalpur,Gwalior,Vijayawada,Jodhpur,Madurai, Raipur,Kota,Guwahati,Chandigarh,Solapur,Hubli,Bareilly,Moradabad,Gurgaon,Aligarh,Jalandhar,Tiruchirappalli,Bhubaneswar,Salem,Thiruvananthapuram,Bhiwandi,Saharanpur,Gorakhpur, Guntur,Bikaner,Amravati,Noida,Jamshedpur,Bhilai,Warangal,Cuttack,Firozabad,Kochi,Bhavnagar,Dehradun,Durgapur,Asansol,Nanded,Kolapur,Ajmer,Gulbarga,Jamnagar,Ujjain,Loni,Siliguri,Jhansi,Ulhasnagar,Nellore,Jammu,Sangli ,Belgaum,Mangalore,Ambattur,Tirunelveli,Malegoan,Gaya,Jalgaon,Udaipur WE CAN ALSO EXPORT IN DIFFERENT COUNTRY LIKE: Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Product Name: Gr1 Titanium Shell & Tube Heat Exchangers Material:Titanium Gr1 Structure: Tube heat exchanger Types: Straight tubes, U-tube, kettle, coils etc. Size: Customized Tests: X ray, DP, UT, MT, PMI, helium leak etc. Gr1 Titanium Shell & Tube Heat Exchangers Relying on various excellent properties of industrial pure titanium, titanium heat exchanger is widely used in many industries and fields, such as seafood breeding, seawater heat exchange, brine heat exchange, chemical industry, food, metallurgy, refrigeration, light industry, electroplating industry, aluminum oxidation tank, salt making, papermaking, acoustic wave, electronic communication, central heating and so on. Product Name: Gr1 Titanium Shell & Tube Heat Exchangers Core Components:titanium tube, shell Condition:New Structure:Tube Heat Exchanger Maximum Working Pressure:0.1MPa Voltage:design as your need Weight:light in weight Dimension(L*W*H):customized Titanium tube material:gr1 titanium Tube thickness:0.9mm/1.2mm/2mm Shell material:titanium or titanium clad material Tube type:seamless or welded Titanium density:4.51g/cm3 MOQ:1set Video outgoing-inspection:Provided Machinery Test Report:Provided Marketing Type:Ordinary Product Warranty of core components:1 Year After Warranty Service:Video technical support Applicable Industries:Hotels, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Food Shop, Construction works , Energy & Mining, Food & Beverage Shops, other

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Porduct name : Titanium Forged Clad Tube Sheet Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc Titanium Forged Clad Tube Sheet Titanium is a new kind of metal, with low density, corrosion resistance, high and low temperature. High strength and other excellent performance. It is an important structural material in aviation, aerospace, chemical, Marine, electric power, metallurgy and other fields. In order to save titanium resources, reduce the cost and promote the application of this new metal material in civil industry, titanium steel composite plate came into being. Titanium steel composite tube plate have the same effect as pure titanium tube plate, but also very good cost saving, widely used in pressure vessels, heat exchangers, urban sewage treatment containers, water storage containers and nuclear waste treatment containers, chemical distillation tanks and so on.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Product name: Gr5 titanium bar Material: Grade 5 titanium Standard : ASTM B348,ASTM B381, AMS 4928,ASTM F136 Size: Dia 5--200mm * Max L6000mm Applications :Industrial Supply status: Annealed Package: Carton or plywood case. Quality and Test : EN10204.3.1 certificate Surface:CNC machined polished MOQ : 10kgs Feature : low density, special strong strength, excellent corrosive resistance Gr5 titanium alloy bar Grade 5 titanium (Ti6Al4V) is the most common and widely used material in titanium alloys.Titanium alloys are mainly used to make aircraft engine compressor components, followed by structural components for rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys were used in the general industry for the production of electrodes for the electrolysis industry, condensers for power stations, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion resistant structural material. Gr5 titanium alloy bar is mainly divided into industrial grade, medical grade and aviation grade. The chemical composition of each grade is similar but not identical, and the physical properties are obviously different. We can provide different grade products according to customer requirements. Material: Gr5 titanium Standard : ASTM B348,AMS 4928,ASTM F136 Diameter:5mm 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 25mm 28mm 30mm 32mm 35mm 36mm 38mm 40mm 42mm 44mm 45mm 46mm 48mm 50mm etc. Length: Max L6000mm Supply status: Annealed Applications :Industrial,aviation,medical etc. Package: Carton or plywood case. Quality and Test : EN10204.3.1 certificate Surface:CNC machined polished Gr 5 titanium alloy bar / rod Chemical Composition Grade Ti C Fe H N O Al V Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min Gr 5 titanium bar / rod Mechanical Properties Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 % Equivalent Grades for Gr 5 STANDARD WERKSTOFF NR. UNS Titanium Gr. 5 3.7165 N56400

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED