Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338 ASTMB 862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
MOQ:100kgs
Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338 ASTMB 862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
MOQ:100kgs
Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338 ASTMB 862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
MOQ:100kgs
Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.
Ladhani Metal Corporation offers SS 310S Half Round Tube Shields designed to safeguard boiler tubes operating under high-temperature and erosive conditions in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes are constantly exposed to oxidation, flue gas erosion, and soot blower impact, leading to premature wear and reduced efficiency. Manufactured from low-carbon austenitic stainless steel grade SS 310S, these shields provide exceptional oxidation resistance, superior creep strength, and reduced risk of sensitization during welding, making them ideal for prolonged high-temperature service.
Function of Boiler Tubes
• Carry water or steam through heating sections of the boiler
• Exposed to erosion from high-velocity flue gases and ash particles
• Require Half Round Tube Shields in soot blower zones and high-temperature erosion areas
Ladhani Metal Corporation manufactures, supplies, and exports SS 310S Half Round Tube Shields in multiple lengths, diameters, and thicknesses to meet the requirements of both domestic and international clients.
SS 310S Grade Chemical Composition – Austenitic Stainless Steel
• Carbon (C): ≤ 0.08%
• Manganese (Mn): ≤ 2.00%
• Phosphorus (P): ≤ 0.045%
• Sulfur (S): ≤ 0.030%
• Silicon (Si): ≤ 1.50%
• Chromium (Cr): 24.00 – 26.00%
• Nickel (Ni): 19.00 – 22.00%
• Iron (Fe): Balance
Applications: Well-suited for use in reheater and superheater sections of thermal power plants, waste heat recovery boilers, HRSGs, and industrial boilers operating under extreme thermal and corrosive environments.
Uses
• Protects boiler tubes against oxidation and flue gas erosion
• Shields tubes from soot blower erosion and abrasive particle damage
• Extends operational life of superheater and reheater tubes
• Used extensively in HRSGs, WHRBs, and large-scale utility boilers
Features
• Excellent oxidation resistance up to 1100°C
• Low carbon content reduces sensitization risk during welding
• Superior strength and stability in prolonged high-temperature service
• Engineered for precise fit and easy installation
Applications
• Power generation boilers – Reheater and superheater tube protection in high-erosion zones
• Waste heat recovery boilers – Guards tubes from ash-laden flue gas streams
• Industrial steam systems – Reliable under continuous high-temperature operation
• Petrochemical and refinery heaters – Suitable for oxidizing and carburizing service conditions
Conclusion
The SS 310S Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides long-lasting protection under severe high-temperature and erosive conditions. With its low-carbon content and high oxidation resistance, it minimizes sensitization risks while extending the life of boiler tubes. Available in export-ready specifications, these shields are the preferred choice for industries worldwide seeking durability, efficiency, and cost-effectiveness. For detailed technical information and supply inquiries, contact Ladhani Metal Corporation.
#Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection
Standard: DIN125
Material: Gr2, Gr5
Size: M1.6-M52
Surface: Polished
Product Introduction
Product Information of Titanium Gasket Flat Washer
Material: GR2 GR5
Standard: DIN125
Technique: CNC/Forged
Surface: Polished
Size: M1.6-M52
Advantages
Light weight
High strength
Excellent corrosion resistance
Good resistance to high temperature
Good resistance to low temperature
High melting point
Low density
Non-magnetic
Low modulus of elasticity
Product Name: Grade 2 titanium welding wire
Standard: AWS A5.16
Material: Grade 2 (ERTi-2)
Unit Price: $21.5usd/kg-$60usd/kg
Shape: Straight, Spool, Coil
Diameter: 0.8mm/1mm/1.2mm/1.6mm/2mm/2.4mm/3mm/3.2mm etc.
Grade 2 titanium welding wire
Standard: AWS A5.16
Material: Grade 2 (ERTi-2)
Unit Price: $21.5usd/kg-$60usd/kg
Shape: Straight, Spool, Coil
Diameter: 0.8mm/1mm/1.2mm/1.6mm/2mm/2.4mm/3mm/3.2mm etc.
Surface: Bright
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
Features of our company's titanium welding wire:
1. Manufactured by a non-oxidized roll mold cold drawing process
2, the welding wire has uniform structure and fine grains
3, high dimensional accuracy, no defects, excellent follow-up processing performance
4, the composition of various elements in the material and the mechanical properties of the material can be effectively controlled
Product Name: WN Titanium Flanges
Standard: ANSI / ASME B16.5
Material: Gr1 Gr2 Gr5 Gr7 Gr12
Unit Price: $25usd/pc-$85usd/pc
Sealing Surface: RF, FF, TG, RJ etc.
Size: NPS 1/2 - NPS 24(DN 10 - 2000)
Pressure: 150#-2500#
Surface: Polished
Technique: Forged and CNC Machined
Inspection: UT% PT%
Certificate: ISO9001, TUV etc.
WN Titanium Flanges
The titanium flange is a part made of pure titanium or titanium alloy, which connects the pipe to the pipe, and to the end of the pipe.
Product Name: WN Titanium Flanges
Standard: ANSI / ASME B16.5
Material: Gr1 Gr2 Gr5 Gr7 Gr12
Unit Price: $25usd/pc-$85usd/pc
Sealing Surface: RF, FF, TG, RJ etc.
Size: NPS 1/2 - NPS 24(DN 10 - 2000)
Pressure: 150#-2500#
Surface: Polished
Technique: Forged and CNC Machined
Inspection: UT% PT%
Certificate: ISO9001, TUV etc.
Differences between Weld neck titanium flange and slip on titanium flange
1. Different welding forms: The welding form of neck flat welded titanium flange pipe and titanium flange is fillet welding, while the welding form of the neck butt welded flange and pipe is girth welding;
2. Different materials: the material of the necked flat welding flange is made of ordinary titanium plate with a thickness that meets the requirements, while the material of the necked butt welding flange is mostly machined from titanium forgings;
3. the nominal pressure is different: the nominal pressure of the necked flat welding flange is: 0.6---4.0MPa, and the nominal pressure of the necked butt welding flange is: 1--25MPa;
4. Another point is that the welding seam between the necked butt-welded flange and the connection pipe belongs to type B seam, and the welding seam between the necked flat-welded flange and the connection pipe belongs to type C seam. And the non-destructive testing after welding is different;
5. The necked flat welding flange and the necked butt welding flange cannot be replaced at will. From a manufacturing perspective, the necked flat welding flange (SO is the abbreviation of Slip On) has a large inner diameter, which means that the weight is light and the cost is low. Neck butt welding flanges (WN is the abbreviation of Welding Neck) with a nominal diameter greater than 250mm need to be tested, and SO flanges do not need to be tested, so the cost is low.
Chat with us
Chat with us
