'marine systems performs'

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to provide robust protection for reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and reduce moisture formation. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields deliver superior resistance to pitting, crevice corrosion, and high-temperature oxidation, making them ideal for aggressive and chloride-containing environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting both domestic and international quality standards. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Uses • Protects reheater tubes from erosion, oxidation, and chloride-induced corrosion • Shields R/H tubes in high-velocity flue gas and particle-laden zones • Extends service life of steam system components under aggressive operating conditions • Suitable for utility boilers, WHRBs, HRSGs, and process heaters Features • Excellent corrosion resistance – Performs well in chloride-rich and oxidizing environments • High thermal stability – Maintains mechanical strength at elevated temperatures • Molybdenum alloyed – Enhanced resistance to pitting and crevice corrosion • Precision-engineered fit – Designed to match exact tube curvature for maximum coverage Applications • Power generation boilers – Long-term reheater tube protection in severe conditions • Waste heat recovery systems – Guards against erosion from high-velocity particles • Industrial steam plants – Reliable under variable thermal cycles • Petrochemical and marine-based steam systems – Suitable for saline and chloride-heavy atmospheres Conclusion The SS 316 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers high-performance protection against erosion, oxidation, and corrosive damage in extreme operating environments. Designed for precision fit and durability, these shields reduce maintenance downtime and extend equipment lifespan. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 316 Boiler Half Round Tube Shields designed to protect straight boiler and heat exchanger tubes from corrosion, erosion, and high-temperature damage in aggressive service environments. Manufactured from austenitic stainless steel grade SS 316, these shields provide superior corrosion resistance, especially against chlorides and acidic flue gases. SS 316 is ideal for applications where moisture, chemical vapors, and thermal stress are present, including marine boilers, waste heat recovery systems, and chemical processing units. Each shield is precision-formed into a half-round profile for a close and secure fit over the outer surface of boiler tubes. This design provides a robust barrier against soot blower impact, abrasive ash particles, and corrosive condensates. The mechanical protection offered by SS 316 shields significantly extends tube service life and reduces maintenance downtime. Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Boiler Half Round Tube Shields in multiple diameters, lengths, and thicknesses to meet the exact specifications of domestic and international projects. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suitable for corrosive and high-moisture environments such as power plants, waste heat boilers, refineries, and process heaters. Uses • Protection of straight boiler tubes in moist or acidic gas streams • Used in marine boilers and off-shore heating systems • Shields against corrosion, scaling, and thermal erosion • Installed in chemical and petrochemical flue gas lines • Suitable for food, pharmaceutical, and pulp industry boilers Features • Excellent corrosion resistance – Especially effective against chlorides and chemicals • High thermal stability – Performs under prolonged heat and steam exposure • Durable and long-lasting – Reduces tube wear and replacement frequency • Precision fit – Half-round shape conforms to tube curvature for full coverage • Easy to install – Can be clamped, banded, or tack welded as needed • Export quality – Manufactured to meet global boiler protection standards Applications • Power generation and utility boilers – For flue gas and steam tube protection • Chemical and fertilizer industries – Withstands corrosive vapors and condensates • Pulp and paper mills – Used in high-moisture heating environments • Waste heat recovery systems – Effective in corrosive flue gas streams Conclusion The SS 316 Boiler Half Round Tube Shield from Ladhani Metal Corporation offers robust, corrosion-resistant protection for boiler tubes exposed to chemically aggressive and high-moisture conditions. With added molybdenum content for enhanced durability and precise half-round design, these shields are ideal for a wide range of industrial and marine boiler applications. For customized specifications, export orders, or technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield

Ladhani Metal Corporation offers top-grade SS 316 Outer Half Round 90 Degree Bend Tube Shields designed to provide robust protection to the outer curvature of U-bend and 90-degree return tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. Manufactured from austenitic stainless steel SS 316, these shields offer superior resistance to pitting, crevice corrosion, and chloride-induced attack, making them ideal for environments with aggressive chemical exposure and high-temperature steam. The shields feature a precisely contoured semi-cylindrical shape that wraps securely around the outer arc of curved tubes. This design creates a physical barrier against flue gas erosion, fly ash impingement, and thermal degradation. Ladhani Metal Corporation—an established manufacturer, supplier, and exporter—provides fully customizable SS 316 bend shields to suit a wide range of boiler and process equipment configurations. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Specifically suited for high-chloride and corrosive service conditions in boilers, HRSGs, WHRBs, and industrial heat exchangers. Uses • Protection of 90-degree bends and U-bends in superheaters and reheaters • Shields return tube arcs in marine boilers, HRSGs, and process steam systems • Ideal for corrosive environments in petrochemical, desalination, and coastal plants • Guards curved sections in heat exchangers, WHRBs, and flue gas circuits Features • Excellent corrosion resistance – Molybdenum enhances protection in chloride-laden atmospheres • High-temperature stability – Performs reliably under fluctuating thermal loads • Erosion resistance – Shields tube curves from ash erosion and gas flow impingement • Precision-formed – Engineered to match tube diameter and bend radius for accurate fit • Versatile installation – Can be tack welded, clamped, or banded securely • Custom options – Available in multiple wall thicknesses, lengths, and curvature specifications Applications • Thermal power plants – Used to shield U-bends in superheater and reheater coils • Chemical plants – Provides long-term protection in acidic or steam-rich environments • HRSGs and WHRBs – Prevents erosion in high-velocity flue gas areas • Marine and coastal installations – Resists corrosion from saltwater-laden air and gases Conclusion The SS 316 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers durable, high-performance protection for boiler and exchanger tubes in harsh service conditions. Its superior corrosion resistance, thermal durability, and precision engineering make it a reliable choice for extending tube life and reducing unplanned outages. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 316 Half Round Straight Tube Shields to offer superior protection for straight tubes in boilers, heat exchangers, and steam systems. Fabricated using molybdenum-bearing austenitic stainless steel, SS 316 provides enhanced resistance to pitting, crevice corrosion, and elevated temperature scaling. These shields are ideal for use in aggressive chemical and marine environments, as well as in high-moisture flue gas areas of power and process boilers. SS 316 Half Round Straight Tube Shield The SS 316 Half Round Straight Tube Shield is designed to safeguard the surface of straight tube sections from erosive flue gas, thermal cycling, and chemical corrosion. Its excellent resistance to chloride-induced attack makes it suitable for areas with seawater exposure, acidic gases, or high humidity. These shields are widely installed in power plants, waste heat recovery units, and process steam equipment where corrosion control is critical to extending tube life and maintaining system efficiency. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316 Half Round Straight Tube Shields, delivering high-performance thermal protection solutions for demanding industrial applications. Material Grade SS 316 – Molybdenum-enhanced austenitic stainless steel with excellent corrosion resistance and thermal strength. Chemical Composition of SS 316 • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Effective in corrosive and wet flue gas environments; ideal for marine boilers, chemical process systems, and flue gas zones with chloride presence. Uses • Protection of straight tubes in superheaters and economizers • Installed in chemical process heat exchangers for corrosion control • Used in marine boilers with exposure to salt-laden air • Applied in biomass and waste-to-energy boilers handling corrosive fuels • Shielding of tubes in fertilizer and paper plants with acidic exhaust gases Features • Excellent corrosion resistance – Especially in chloride, acidic, and marine environments • Good scaling resistance – Performs well under high-temperature oxidative conditions • Durable and reliable – Maintains integrity during prolonged exposure to heat and corrosive elements • Easy to install – Available with weld-on, clamp-on, or strapped fixing options • Available in custom dimensions – Designed to match tube size, shape, and installation parameters • Prolongs tube life – Reduces need for frequent replacement and minimizes unplanned shutdowns Applications • thermal power plants – Protects straight boiler tubes against high-temperature corrosion • marine and offshore systems – Withstands saline and humid atmospheres • waste heat recovery – Shields tubes in exhaust zones from ash and corrosive gases • petrochemical and fertilizer industries – Applied to extend the lifespan of steam and heat exchanger tubing • pulp and paper plants – Protects against acidic process byproducts in recovery boilers Conclusion The SS 316 Half Round Straight Tube Shield from Ladhani Metal Corporation is engineered to deliver long-lasting protection in corrosive, high-heat, and moisture-prone environments. Its molybdenum-rich composition provides exceptional defense against chloride corrosion and thermal degradation, making it an essential component for boiler tube maintenance and longevity. For custom sizes, detailed specifications, or bulk orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to guard boiler tubes, heat exchangers, and superheaters against flue gas erosion, fly ash abrasion, scaling, and thermal fatigue. These shields are widely used in power generation, chemical processing, and industrial steam systems to extend the operational life of tubing in high-wear zones. The half-round profile ensures easy fitment over straight or curved tubes, especially in areas exposed to turbulent gas flow and ash impact. 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube The 1Cr18Ni9Ti Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, equivalent to AISI 321. This material offers excellent resistance to intergranular corrosion and high-temperature oxidation while maintaining good mechanical strength. Its titanium content improves stability during welding and long-term thermal exposure, making it especially suitable for Low Temperature Superheater (LTSH) applications in boilers and heat recovery systems where steam tubes are subject to moderate heat, soot, and particulate attack. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti Half Round Tube Shields for LTSH systems, offering reliable and corrosion-resistant protection for thermal and energy-related applications. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C% • Iron (Fe): Balance Applications: Ideal for LTSH areas and convection zones in boilers exposed to flue gas condensation, moderate corrosion, and thermal fatigue from cyclic operations. Uses • Installed on LTSH tubes to protect from scaling, soot erosion, and ash deposition in thermal power plants • Shields superheater coils and heat exchanger bends in WHRBs and HRSGs • Suitable for industrial boilers in chemical plants where acidic or chloride-bearing gases are present • Used in biomass and coal-fired systems to reduce wear on tube surfaces from fly ash and gas turbulence • Effective in marine and coastal steam generation systems with moisture and chloride exposure Features • Excellent intergranular corrosion resistance – Stabilized with titanium for weld integrity and long-term stability • High-temperature oxidation resistance – Performs well under cyclic heat exposure and oxidizing gas conditions • Custom fit – Manufactured to match exact tube diameter, curvature, and installation length • Easy to mount – Suitable for welding, clamping, or banding installation methods • Enhanced tube life – Reduces maintenance frequency and increases system efficiency • Available in various thicknesses, lengths, and bend radii as per operational needs Applications • thermal power stations – Protects LTSH tubes from scaling and ash erosion in flue gas zones • waste heat recovery units – Shields return tube bends and convection coils from abrasive flow • steam generation systems – Enhances tube life in low-temperature superheater environments • refinery boilers – Resists acidic gas effects and thermal stress in process heating units • utility boilers – Used in coal-fired and biomass-fired systems requiring long-term tube protection Conclusion The 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-performance protection for boiler and superheater tubes in low-temperature, corrosive, and abrasive environments. With titanium stabilization and excellent thermal durability, it ensures extended service life and improved system reliability in a range of industrial and thermal applications. For customized designs, technical consultation, or pricing details, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger, boiler, and superheater tubes from erosion, scaling, slag deposition, and corrosion under high-temperature operating conditions. These shields are widely used in industries such as power generation, petrochemical processing, waste heat recovery, and chemical manufacturing. Their half-round structure allows for quick installation over curved or straight tube sections, providing dependable protection and extending equipment lifespan without requiring major disassembly. SS 316L U Type Inner Half Round Tube Shield The SS 316L U Type Inner Half Round Tube Shield is fabricated from low-carbon austenitic stainless steel grade 316L. It offers superior corrosion resistance, particularly in chloride-rich or acidic environments, and improved weldability with reduced risk of intergranular corrosion after welding. The inner U-type configuration is specifically engineered to shield the inner arc of U-bend tubes—an area highly vulnerable to turbulence-induced erosion, scaling, and thermal fatigue. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from flue gas turbulence, localized corrosion, and heat-induced scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316L U Type Inner Half Round Tube Shields, providing durable and customizable shielding solutions for demanding thermal and corrosive applications. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for welded systems and high-temperature environments exposed to chlorides, acidic gases, or steam, where resistance to corrosion and thermal degradation is essential. Uses • Shields inner arcs of U-bend tubes in boilers, superheaters, and reheaters operating in corrosive and high-heat zones • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs subjected to scaling and slag formation • Used in curved tube sections of steam reformers, condensers, and marine heat exchangers • Applied in chemical and fertilizer plants with exposure to acidic, chloride-rich, or humid gases • Suitable for welded assemblies where protection against intergranular corrosion is necessary Features • Excellent corrosion resistance – Enhanced performance in acidic, chloride-laden, and high-moisture environments • Low carbon content – Minimizes risk of intergranular corrosion after welding or high-temperature service • Inner bend protection – Shields areas affected by turbulence, localized heat, and erosion • High-temperature durability – Performs reliably in oxidizing environments up to 870°C • Custom fabrication – Tailored to match specific tube diameters and bend radii for a secure, gap-free fit • Easy installation – Suitable for clamp-on, banding, or weld-on mounting without requiring full system disassembly Applications • power generation – Inner U-type shields for protecting boiler and economizer bends in thermal power stations • petrochemical facilities – Guards internal tube bends exposed to chlorides and hot process gases in reformers • waste heat recovery systems – Applied to WHRBs and HRSGs for inner arc protection from flue gas scaling • chemical processing units – Used in reactors and exchanger coils to resist chemical and thermal corrosion • marine and offshore systems – Ensures long-term durability of U-bends exposed to saltwater-laden environments Conclusion The SS 316L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant protective component designed for inner arc shielding in U-bend tubes operating under harsh thermal and chemical conditions. With its superior weldability, resistance to pitting, and high-temperature strength, it is ideal for critical service in energy, chemical, and marine applications. For technical support, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 304L U Type Outer Half Round Tube Shield The SS 304L U Type Outer Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel, SS 304L, offering enhanced weldability and resistance to intergranular corrosion. This shield is specifically designed to protect the outer curvature of U-bend tubes in high-temperature and moderately corrosive environments such as boilers, superheaters, and heat exchangers. The outer U-type configuration focuses on shielding the most exposed area of return bends from flue gas erosion, slag impact, and thermal oxidation. • Outer U Type Half Round Tube Shield – Provides targeted protection to the external arc of U-bend tubes, reducing surface degradation caused by hot gas streams and mechanical wear. Ladhani Metal Corporation supplies SS 304L U Type Outer Half Round Tube Shields with precision-engineered profiles to ensure long-term performance and durability in harsh industrial conditions. Chemical Composition of SS 304L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Well-suited for moderately corrosive, high-temperature environments where resistance to weld decay and oxidation is required. Uses • Protection of outer U-bend surfaces in superheaters and reheaters in thermal power generation systems • Shielding external arcs in heat exchangers and condensers in the chemical and petrochemical industries • Outer bend coverage in waste heat recovery boilers (WHRBs) and HRSGs exposed to flue gases and particulate flow • Used in marine, food-grade, and process steam systems where chloride resistance and cleanliness are important • Ideal for systems requiring excellent weldability and post-fabrication corrosion resistance Features • Excellent corrosion resistance – Low carbon content improves resistance to intergranular corrosion after welding or high-heat exposure. • Outer U-bend protection – Specifically shaped to guard the outer surface of U-bend tubes from high-temperature gas flow and slag contact. • High-temperature performance – Performs reliably in temperatures up to 870°C, resisting scale formation and oxidation. • Custom fit – Engineered to precisely match tube diameters and bend radii for a snug and stable fit without displacement. • Easy to install – Can be quickly mounted using clamps, stainless banding, or tack welds without requiring system downtime or disassembly. • Long service life – Withstands thermal cycling and corrosive gas exposure to minimize tube damage and maintenance intervals. Applications • power plants – Used in superheaters and reheaters for protecting the outer arcs of return bends from flue gas and heat-related scaling. • chemical processing – Shields tube surfaces in exchangers and preheaters that experience moderate chemical attack and thermal fatigue. • WHRBs and HRSGs – Installed on outer curves of U-bend tubes to prevent erosion and reduce downtime in heat recovery systems. • marine and coastal facilities – Suitable for salt-laden environments where chloride resistance is essential for sustained performance. • food, beverage, and clean process industries – Provides hygienic protection for tube bends in steam and thermal processing systems. Conclusion The SS 304L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation offers dependable protection for the most vulnerable outer surfaces of U-bend tubes in high-temperature and moderately corrosive applications. With its low-carbon alloy composition, it combines superior corrosion resistance with excellent weldability, making it ideal for power generation, petrochemical, marine, and process industries. Customizable to your system’s specifications, this shield ensures long-lasting performance, reduced maintenance, and improved system reliability. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 304 U Type Outer Half Round Tube Shield The SS 304 U Type Outer Half Round Tube Shield is designed specifically to protect the outer arc of U-bend tube sections in boilers, superheaters, and heat exchangers. Made from SS 304, a widely used austenitic stainless steel with excellent formability and corrosion resistance, this shield provides effective protection against erosion, scaling, and oxidizing environments. Its outer U-type configuration covers the exterior curve of the return bend, where flame impingement, high-velocity gas flow, and particulate abrasion are most likely to occur. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bends from thermal stress, hot gas erosion, slag buildup, and oxidation. Ladhani Metal Corporation manufactures and exports SS 304 U Type Outer Half Round Tube Shields with precision fit and durable construction, ideal for a wide range of industrial heating and thermal transfer systems. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and high-temperature environments involving flue gases, steam, and airborne particulates. Uses • Protection of outer arcs of U-bend tubes in superheaters and reheaters in power plants • Shielding tube bends in chemical and petrochemical heat exchangers exposed to steam and flue gases • Coverage for WHRB return bends where outer surfaces face direct gas or slag contact • Ideal for boilers, condensers, and heaters operating under cyclic thermal and mechanical stress • Used in coastal, marine, and industrial environments requiring stainless steel durability and corrosion resistance Features • Good corrosion resistance – Chromium-nickel austenitic alloy resists oxidation, steam corrosion, and mild chemical exposure. • Outer bend protection – Designed specifically to guard the most exposed curve of the U-bend, where erosion and wear are concentrated. • High-temperature stability – Performs reliably under operating temperatures up to 870°C with minimal scaling or deformation. • Custom engineered – Precisely manufactured to match the tube’s radius and diameter for stable, secure placement. • Easy to install – Mountable using clamps, stainless steel banding, or tack welds, with no need for system disassembly. • Economical and reliable – Offers a cost-effective solution for extending tube life and reducing repair intervals. Applications • thermal power stations – Installed on the outer curves of U-bend tubes in high-temperature zones to resist flue gas erosion and thermal degradation. • chemical processing plants – Shields outer tube surfaces in heaters and exchangers exposed to steam and chemical-laden air. • waste heat recovery systems – Protects external bend arcs from particulate erosion and thermal cycling in HRSGs and WHRBs. • food and beverage industry – Used in heat exchangers and process heaters where cleanliness and corrosion resistance are required. • marine and industrial boilers – Applied in environments where exposure to saline air and high heat demands dependable surface protection. Conclusion The SS 304 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation is an effective and reliable solution for protecting the outer curves of U-bend tubes in boilers and heat exchangers. Manufactured from high-quality SS 304, it offers dependable corrosion and erosion resistance under thermal stress. Customizable for various tube sizes and easy to install, this shield helps reduce wear, extend equipment life, and improve overall system efficiency in power, chemical, and industrial heating applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316 U Type Half Round Tube Shield The SS 316 U Type Half Round Tube Shield is specifically designed to protect U-bend sections in superheaters, reheaters, and heat exchanger coils. Manufactured from SS 316, a molybdenum-bearing austenitic stainless steel, it offers enhanced resistance to pitting, crevice corrosion, and chloride-induced attack. The U-type design ensures precise coverage over tube bends, where erosion and heat damage are most intense. Both inner and outer U configurations are available for comprehensive protection. • Outer U Type Half Round Tube Shield – Protects the outer curvature of the U-bend from flame impingement, slag buildup, and high-velocity gas erosion. • Inner U Type Half Round Tube Shield – Shields the inner arc of the bend against turbulence-induced wear, localized corrosion, and scaling. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 316 U Type Half Round Tube Shields, delivering high-performance solutions for industries requiring superior corrosion resistance and heat tolerance. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Best suited for environments with exposure to chlorides, steam, and acidic gases, where resistance to corrosion and heat is critical. Uses • Protection of U-bend tubes in high-temperature boiler coil sections • Shielding tube bends in chemical heat exchangers and steam reformers • Coverage for WHRB tube bends exposed to abrasive flue gas streams • Safeguarding curved tubes in condensers, superheaters, and evaporators • Ideal for corrosive and chloride-laden environments in marine or coastal installations Features • Excellent corrosion resistance – Made from SS 316 with molybdenum, offering superior protection against pitting, crevice corrosion, and acidic gas exposure. • High-temperature performance – Performs reliably in high-heat environments, withstanding oxidation and thermal stress during prolonged operation. • Dual-side coverage – Available in both inner and outer U-type configurations for full protection of return bends in heat exchanger and boiler systems. • Precision fitment – Custom-fabricated to match tube radius and diameter for a tight, secure fit that prevents movement and surface exposure. • Easy to install – Designed for quick and secure mounting using clamps, tack welds, or banding without requiring system disassembly. • Custom dimensions – Available in a wide range of lengths, thicknesses, and tube radii to meet exact design and performance requirements. Applications • thermal power plants – Used on U-bend tubes in superheaters and reheaters to resist flue gas corrosion and scaling. Enhances service life and reduces downtime in high-temperature zones. • petrochemical plants – Shields tube bends in steam reformers and exchangers exposed to chlorides and process gases. Provides robust corrosion protection in aggressive chemical environments. • waste heat recovery systems (WHRBs) – Protects curved tubes in exhaust gas streams from slag erosion and thermal shock. Improves long-term durability under fluctuating temperatures and gas flow. • chemical and fertilizer industries – Installed on tube bends in reactors and ammonia reformers for corrosion and erosion resistance. Helps prevent pitting and degradation from acidic and chloride-containing media. • HRSGs and industrial boilers – Used in return bends to prevent surface scaling and heat-induced fatigue. Maintains structural integrity and energy efficiency in cyclic operating conditions. Conclusion The SS 316 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a dependable solution for protecting U-bend tubes in corrosive and high-temperature environments. Its superior resistance to chlorides, acids, and oxidizing gases makes it ideal for petrochemical, power, and chemical industries. Designed for durability, precision fit, and ease of installation, these shields are fully customizable to your specific system requirements. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.