'lowcarbon variation'

Ladhani Metal Corporation manufactures Protection Tube Sleeves designed to safeguard boiler tubes, heat exchanger coils, and industrial piping exposed to high-temperature erosion, flue gas corrosion, and abrasive particle wear. These sleeves act as a replaceable protective covering, absorbing the mechanical and chemical damage that would otherwise reduce tube service life. Function of Protection Tube Sleeves • Protect boiler and heater tubes from erosion, oxidation, and scaling • Reduce wear in high-velocity flue gas zones and soot blower impact areas • Extend tube lifespan and minimize costly replacement downtime • Improve boiler reliability under harsh operating environments Ladhani Metal Corporation manufactures, supplies, and exports Protection Tube Sleeves in a variety of lengths, diameters, and thicknesses for both domestic and international projects. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in thermal power plants, waste heat recovery boilers (WHRBs), HRSGs, superheaters, reheaters, economizers, and petrochemical process heaters. Uses • Provides erosion resistance for boiler tube bends and straight lengths • Shields tubes in high-velocity flue gas and abrasive ash environments • Suitable for high-temperature reheater and superheater tubes • Applied in HRSGs, WHRBs, and industrial steam plants Features • Excellent resistance to oxidation and erosion at high temperatures • Strong mechanical performance with precision-engineered fit • Easy installation and replacement during maintenance cycles • Available in stainless steels and heat-resistant alloy grades Applications • Power generation boilers – Tube protection in reheater and superheater zones • Waste heat recovery systems – Guards against ash and flue gas erosion • HRSGs – Withstands cyclic temperature variations • Industrial boilers and process heaters – Reliable under erosive service conditions Conclusion Protection Tube Sleeves by Ladhani Metal Corporation provide durable and cost-effective shielding for boiler tubes and steam system components operating in aggressive environments. Available in stainless steel and heat-resistant alloy grades, these sleeves ensure longer equipment life, reduced downtime, and export-quality reliability. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32

Product name: Gr2 Titanium Tubes 25.4mm Standard:ASTM B338 Material:Titanium Gr2 Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr2 Titanium Tubes 25.4mm Titanium pipe/titanium alloy pipe has excellent strength, hardness, small density, light weight, high temperature resistance, low temperature resistance, good machining performance, excellent corrosion resistance, non-magnetic non-toxic, good heat exchange performance. It also has memory and superconductivity. Hydrogen storage performance is very outstanding, the products are widely used in: navigation, aerospace, vacuum salt, automotive industry, medical sports, paper and textile industry, electric power industry, metallurgy industry, chlor-alkali industry, chemical fertilizer industry, seawater desalination industry. 1.Shape: round tube, square tube, spiral tube, coil tube, 2. Standard: ASTM B337, ASTM B338, ASTM B861, ASTM B862 3. Srand: Titanium GR2 4. Specifications: ф (3-159) x (0.2-10.0) x L(500-9000) ф (30-1000) x (0.5-12.0) x L(500-15000) Extruded tube (M state) ф (45-219) x (5.0-30.0) x L 5. Production method: cold rolling, extrusion 6. Testing: ultrasonic testing, eddy current testing, water pressure testing, airtight testing Chemical composition (Wt%) ASTM No. Fe max O max N max C max H max Pd Al Bal Grade 2 0.3 0.25 0.03 0.1 0.015 - - Ti Physical Properties (Min) ASTM Grade Alloy Composition Tensile Strength Yield Strength Elongation min % ksi Mpa ksi Mpa

Product name:Titanium grade 7 welding wire Standard : AWS a5.16 , ASME SFA 5.16 Grade : GR7 (ErTi-7,Ti-0.2Pd ) Diameter : 1.0mm 1.2mm 1.6mm 2.0mm 2.4mm 3.2mm etc. Shape : Coil,spool,straight. Surface : Pickling surface/bright surface Application :Welding Description Gr7 Titanium Welding Wire Product Gr7 titanium welding wire/ gr7 titanium tig wire Size Straight: Dia.: 1.0mm-5.0mm (0.04"-0.02", tolerance: +/-0.05mm, +/-0.002") 3000mm (118") max length Coiled: Dia.: 0.5mm-5.0mm (0.02", tolerance: +/-0.05mm, +/-0.002") Spool diameter: around 300mm (12") Material Grade 7 titanium Standard AWS 5.16, etc. Surface Black, Pickled, Polished (for dia. >1mm) Shape Straight or Coiled Grade 7 (Ti-0.2Pd) titanium wire Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",