'leakfree operation supplied'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective sleeves designed to prevent wear, oxidation, and erosion of boiler and heat exchanger tubes. These shields enhance the durability and reliability of tubing systems exposed to high temperatures, flue gases, and mechanical abrasion. Their half-round structure allows easy installation and targeted protection without disrupting the tube layout. SS 310S U Type Half Round Tube Shield The SS 310S U Type Half Round Tube Shield is specifically designed for protecting curved (U-bend) and adjoining straight sections of tubes in boilers, superheaters, and heat exchangers. Made from SS 310S, a low-carbon variation of stainless steel 310, this shield offers superior resistance to high-temperature oxidation and intergranular corrosion, especially in welded structures. The U-shaped profile ensures a snug fit over return bends, where thermal fatigue and erosion are most severe. Shields are available in both inner and outer U configurations to provide full protection. • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes, shielding against heat, slag, and gas erosion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the bend from turbulence, hot spots, and corrosive attack. Ladhani Metal Corporation is a reputed manufacturer and exporter of SS 310S U Type Half Round Tube Shields, offering reliable tube protection solutions tailored to industry-specific needs. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Well-suited for high-temperature operations involving welding or thermal cycling where resistance to oxidation and intergranular corrosion is critical. Uses • U-bend protection in superheater and reheater coil loops • Furnace coil shielding in petrochemical and refining systems • High-temperature tube bend coverage in WHRBs and HRSGs • Erosion protection for tube bends in steam reformers and reactors • Surface preservation in boilers, incinerators, and cement kilns Features • High-temperature performance – Made from SS 310S, offering excellent resistance to oxidation, scaling, and thermal corrosion in environments up to 1100°C. • Low carbon advantage – Reduced carbon content minimizes the risk of intergranular corrosion after welding, ideal for high-temperature welded structures. • Complete U-bend protection – Available in inner and outer U-type configurations to shield both sides of the tube bend from erosion and heat damage. • Accurate fitment – Custom-formed to the exact tube radius and diameter for a snug, secure fit that resists vibration and thermal stress. • Durable under thermal cycling – Maintains shape and mechanical strength under repeated heating and cooling, reducing the chance of failure. • Multiple finish options – Supplied in pickled, passivated, or bright annealed finishes to enhance surface resistance and service life. • Easy installation – Designed for simple on-site clamping, welding, or banding without disassembling existing tube arrangements. • Fully customizable – Available in various thicknesses, lengths, and radii to match specific boiler, exchanger, or furnace system requirements. Applications • thermal power plants – Used to protect U-bend tubes in superheaters and reheaters. Ensures resistance to scaling, oxidation, and high flue gas temperatures. • petrochemical refineries – Shields return bends in reformers and heat exchangers. Maintains performance under carburizing and oxidizing conditions. • waste heat recovery systems (WHRBs) – Guards curved tubes against ash, slag, and gas turbulence. Increases tube life in high-temperature waste gas environments. • chemical and fertilizer plants – Used in high-temperature reactors and ammonia processing lines. Prevents tube damage from corrosive gases and thermal fatigue. • HRSGs and boilers – Installed on coil bends in steam generator systems. Enhances system reliability under rapid heating and cooling cycles. Conclusion The SS 310S U Type Half Round Tube Shield by Ladhani Metal Corporation is engineered for long-term performance in high-temperature, corrosive, and welded environments. With its low carbon content and excellent resistance to oxidation, it is ideal for protecting curved tube sections in critical systems. Designed for easy installation and custom fit, these shields extend the service life of boiler and exchanger tubes while minimizing maintenance. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers tube protection solutions tailored to your application. For specifications, material selection, or custom inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are expertly engineered components designed to extend the life of boiler and heat exchanger tubes by protecting them against high-temperature oxidation, flue gas erosion, and mechanical damage. These shields are essential in power generation, petrochemical, and process industries where tube integrity is critical for system reliability and operational safety. 1Cr18Ni9Ti Half Round Tube Shield The 1Cr18Ni9Ti Half Round Tube Shield is a semi-cylindrical protective cover manufactured from titanium-stabilized stainless steel grade 1Cr18Ni9Ti. This material is equivalent to AISI 321 and is known for its excellent resistance to intergranular corrosion, especially after welding or prolonged high-temperature exposure. The addition of titanium in the alloy stabilizes the microstructure and prevents chromium carbide precipitation, making it ideal for thermal systems operating between 400°C and 900°C. The shield’s half-round design allows for quick and secure installation over existing tubes, providing durable protection in aggressive industrial environments. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Uses • Boiler Tube Protection – Guards tubes from high-temperature scaling and corrosion in superheater and reheater sections exposed to combustion gases. • Heat Exchanger Tubing – Reduces risk of thermal fatigue and corrosion in steam or process exchangers operating in elevated temperature zones. • Furnace Tube Shielding – Ideal for protecting radiant and convection zone tubes from oxidation and mechanical wear in refinery and chemical furnaces. • Petrochemical Piping – Prevents tube degradation in reformers, heaters, and gas coolers exposed to carburizing and oxidizing atmospheres. • Power Plant Steam Systems – Shields tubing in HRSGs and utility boilers operating under high-temperature and fluctuating load conditions. Features • Excellent Intergranular Corrosion Resistance – Titanium addition prevents carbide precipitation, making the shield ideal for welded and heat-cycled environments. • High-Temperature Stability – Performs effectively up to 850°C with consistent mechanical strength and oxidation resistance. • Austenitic Structure – Offers good ductility, toughness, and resistance to thermal shock and creep deformation. • Half-Round Precision Fit – Custom-formed to match tube diameters, ensuring tight coverage and easy field installation with clamps or welds. • Corrosion Protection – Withstands acidic flue gases, steam condensates, and other corrosive industrial byproducts. • Finishing Options – Supplied in bright annealed, pickled, or passivated finishes to suit operational and aesthetic needs. • Custom Dimensions – Available in various wall thicknesses, lengths, and diameters to suit different system designs and operating conditions. Applications • Thermal and Nuclear Power Plants – Protects boiler and superheater tubes from high-temperature stress and oxidation in base-load and cyclic operations. • Oil Refineries – Applied in fired heaters and reformers where tube protection from scale and corrosion is essential for system longevity. • Chemical Process Plants – Guards steam and fluid tubes in reactors and exchangers handling acidic or oxidizing media at high heat. • Fertilizer Industry – Shields ammonia converter and steam reforming tubes subjected to repeated thermal cycling. • Waste-to-Energy and Biomass Plants – Prevents erosion and degradation of tubes in flue gas zones with corrosive combustion byproducts. • Heat Recovery Steam Generators – Used in combined-cycle plants to extend the life of high-temperature steam tubing systems. Conclusion The 1Cr18Ni9Ti Half Round Tube Shield by Ladhani Metal Corporation is a superior-grade solution for tube protection in high-temperature, high-pressure, and corrosive industrial environments. Its titanium-stabilized austenitic structure offers outstanding resistance to intergranular corrosion, making it especially effective in welded applications and thermal systems exposed to fluctuating service conditions. Engineered for durability and precision, these shields help reduce maintenance costs, prevent tube failures, and ensure continuous, efficient system performance. With customizable sizes, expert fabrication, and reliable material traceability, Ladhani Metal Corporation is a trusted partner for advanced tube shielding solutions. For technical consultation, application support, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect the outer surfaces of boiler tubes, heat exchangers, and industrial piping systems from erosion, scale formation, and thermal fatigue. These shields play a crucial role in minimizing tube failure and improving overall equipment reliability in high-temperature and particulate-laden environments. SS 430 Half Round Tube Shield The SS 430 Half Round Tube Shield is a semi-cylindrical cladding made from ferritic stainless steel grade 430. With good corrosion resistance, excellent oxidation resistance, and superior thermal conductivity, SS 430 is well suited for non-pressurized or moderately corrosive environments. It is particularly effective in flue gas paths and air preheaters where thermal stress and ash erosion can degrade exposed tubes. The half-round geometry ensures easy, secure installation and a consistent protective barrier around the tube's surface, enhancing durability without interfering with system function. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Surface Protection – Shields tubes in low to moderate temperature zones from flue gas corrosion, ash abrasion, and thermal scaling. • Air Preheater Tubing – Guards against dust erosion in regenerative air preheaters and gas-to-air heat transfer zones. • Economizer Tube Protection – Used in downstream sections of boilers where lower temperatures allow for effective use of ferritic steels. • Steam Line Shields – Protects low-pressure steam tubing and condensate lines in systems not requiring austenitic stainless steel grades. • Heat Exchanger Outer Shells – Provides an extra layer of protection in air-cooled or shell-side applications exposed to mechanical wear. Features • Good Oxidation Resistance – Performs reliably in oxidizing conditions up to 815°C, ideal for flue gas exposure and dry ash environments. • Ferritic Structure – Offers better thermal conductivity and resistance to thermal expansion than austenitic grades, reducing distortion risk. • Corrosion Resistance – Resists corrosion from atmospheric moisture, flue gas condensates, and other mildly aggressive compounds. • Cost-Effective – Offers an economical alternative to higher alloy stainless steels in appropriate thermal zones. • Precision Fit – Half-round design enables quick installation and conforms closely to tube diameters for optimal protection. • Surface Finish Options – Supplied in bright annealed, pickled, or passivated finishes based on operational requirements. • Custom Fabrication – Available in a range of wall thicknesses, diameters, and lengths to meet plant-specific installation demands. Applications • Thermal Power Stations – Shields economizer and air preheater tubes from dust-laden exhaust gas erosion and moderate thermal stress. • Cement and Lime Kilns – Used to protect heat recovery and cooler tubes from dry ash abrasion in hot air ducts. • Food Processing Boilers – Applied in steam systems requiring corrosion resistance and thermal control under hygienic conditions. • HVAC and Utility Boilers – Installed in auxiliary boilers where conditions do not require high-alloy materials but demand durability. • Pulp and Paper Mills – Protects lower furnace zone tubes and stack-side economizers from condensate corrosion and soot accumulation. • Sugar and Distillery Plants – Guards process steam and heat recovery tubes from ash and scale in biomass and bagasse-fired units. Conclusion The SS 430 Half Round Tube Shield by Ladhani Metal Corporation is a durable, cost-efficient solution for protecting tubing systems in environments where moderate corrosion resistance, good oxidation behavior, and thermal stability are essential. It is best suited for dry, low to mid-temperature gas flow areas where the mechanical and thermal loads are not extreme. The ferritic stainless steel structure provides a favorable balance of performance and economy, particularly in large-scale power and process plants. With precision manufacturing, tailored dimensions, and reliable service, Ladhani Metal Corporation delivers proven tube protection technology trusted across multiple industries. For custom orders, sizing assistance, or to request a technical quote, please contact Ladhani Metal Corporation.

DIN 2569 Monel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-grade Monel alloys, specifically designed for high-pressure and highly corrosive environments. Built to DIN 2569 standards, these flanges offer excellent resistance to seawater, acids, and alkalis, along with superior mechanical strength and durability. Their robust performance makes them ideal for critical applications in marine engineering, chemical processing, oil and gas, and offshore industries. Ladhani Metal Corporation is a leading manufacturer and exporter of Monel flanges, offering reliable and high-quality products that meet stringent international standards. The welding neck configuration ensures permanent, high-strength connections suitable for continuous operation under high pressure and temperature conditions. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring outstanding corrosion resistance, sealing integrity, and mechanical performance in aggressive and demanding environments. Flange Types: • Welding Neck Flanges Provide high-strength welded connections for pressurized piping systems exposed to thermal expansion and vibration. • Raised Face (RF) Flanges Enhance gasket compression and sealing performance in high-pressure and temperature applications. • Flat Face (FF) Flanges Used in applications with flat mating surfaces, particularly when connecting to brittle or non-metallic materials. • Forged Welding Neck Flanges Offer high mechanical strength, dimensional accuracy, and durability. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer requirements. Monel Grades and Composition: 1. Monel 400 (Nickel-Copper Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, and fuel or freshwater tanks due to its excellent resistance to seawater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (Precipitation-Hardened Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for applications requiring high strength and corrosion resistance, such as pump shafts, oil well tools, and marine components. K500 offers greater mechanical strength and hardness compared to Monel 400. Applications of DIN 2569 Monel Flanges: • Marine and Offshore Engineering: Perfect for underwater, saltwater, and coastal applications due to excellent seawater and corrosion resistance. • Chemical and Petrochemical Industries: Used in acid and alkali handling systems, heat exchangers, and reactors where corrosion resistance is crucial. • Oil and Gas Sector: Employed in valves, pipes, and flanges exposed to sour gas and offshore drilling conditions. • Power Generation: Suitable for condenser tubing and heat exchangers in environments where both corrosion and high temperature are factors. • Aerospace and Defense: Used in high-performance components requiring durability, resistance to aggressive chemicals, and thermal stability. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent corrosion resistance in acidic and marine environments • High mechanical strength and thermal stability • Permanent welded neck design for secure pipe integration • Supplied with test certifications and complete traceability • Custom machining and finishing available including pickling and passivation Conclusion: DIN 2569 Monel Flanges PN 100 from Ladhani Metal Corporation are engineered for critical operations that demand corrosion resistance, strength, and durability under pressure. These flanges are trusted in marine, chemical, and energy sectors, delivering dependable service in the most challenging environments. For tailored specifications, material consultations, or bulk orders, reach out to Ladhani Metal Corporation today.

DIN 2568 Carbon Steel Flanges PN 64 are robust threaded flanges manufactured from high-strength carbon steel, specifically designed to deliver reliable performance in high-pressure industrial systems. Produced in accordance with DIN 2568 specifications, these flanges offer excellent mechanical strength, thermal conductivity, and impact resistance, making them well-suited for demanding applications in oil and gas, petrochemicals, water treatment, mechanical construction, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, offering products that comply with international quality standards and dimensional tolerances. The threaded design enables quick, weld-free installation and removal, making these flanges ideal for systems requiring ease of maintenance and rapid assembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered to withstand high-pressure environments and thermal variations in critical industrial applications. Flange Types: • Threaded (Screwed) Flanges Enable efficient installation without welding, ideal for systems requiring regular inspection or maintenance. • Raised Face (RF) Flanges Improve gasket sealing by concentrating pressure at the gasket area, ideal for high-pressure applications. • Flat Face (FF) Flanges Used in systems involving flat mating surfaces, particularly with brittle or non-metallic equipment. • Forged Threaded Flanges Provide excellent mechanical properties, dimensional accuracy, and durability under load. • Custom-Machined Flanges Available in various sizes, sealing surfaces, and material grades as per customer requirements. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Widely used in valve, pipe, and fitting assemblies in oil and gas, power, and chemical systems due to its strength, toughness, and weldability. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Ideal for cryogenic and low-temperature pressure systems such as pipelines, storage tanks, and vessel components operating in sub-zero climates. Applications of DIN 2568 Carbon Steel Flanges: • Oil and Gas Industry Utilized in upstream and downstream operations, including high-pressure pipelines, wellheads, and separators. • Power Plants Used in steam, cooling water, and high-pressure boiler systems. • Water and Wastewater Management Suitable for potable water lines, sewage treatment facilities, and utility piping systems. • Petrochemical and Refining Applied in process piping that handles non-aggressive or mildly corrosive fluids. • Mechanical and Structural Installations Common in HVAC systems, pressure vessels, and general mechanical piping networks. Key Features: • Manufactured as per DIN 2568 standard • Rated for PN 64 high-pressure applications • Excellent strength, impact resistance, and thermal conductivity • Threaded connection ensures quick and easy, weld-free assembly • Cost-effective and durable solution for industrial infrastructure • Supplied with test certificates, inspection reports, and full traceability • Compatible with galvanizing, coating, or welding processes as required Conclusion: DIN 2568 Carbon Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high performance in critical industrial environments. Offering high pressure resistance, mechanical durability, and easy installation, these flanges are an optimal solution for a wide range of piping systems. For custom sizes, material options, or technical consultation, contact Ladhani Metal Corporation today.

DIN 2567 Carbon Steel flanges PN 25 and PN 40 are robust threaded flanges manufactured from high-strength carbon steel, engineered to perform reliably in moderate to high-pressure applications. Built to DIN 2567 standards, these flanges offer excellent mechanical strength, durability, and thermal conductivity, making them suitable for general-purpose industrial systems such as oil and gas, water pipelines, power plants, and mechanical construction. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, delivering components that meet stringent international standards. The threaded design ensures quick, weld-free assembly, making these flanges ideal for systems requiring ease of installation and periodic disassembly. Pressure Ratings: • PN 25 (25 bar / 362 psi): Designed for industrial systems requiring strong mechanical performance and resistance to moderate pressure and temperature variations. • PN 40 (40 bar / 580 psi): Suitable for high-pressure piping systems and fluid-handling applications in power, oil & gas, and manufacturing sectors. Flange Types: • Threaded (Screwed) Flanges Allows easy installation and removal, especially in systems requiring regular maintenance. • Raised Face (RF) Flanges Enhances sealing performance under elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially when brittle or non-metallic components are involved. • Forged Threaded Flanges Provide superior strength, resistance to impact, and tight dimensional tolerances. • Custom-Machined Flanges Available in various sizes, pressure classes, and carbon steel grades as per customer specifications. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% o Applications: Widely used in oil and gas piping, power generation, valves, and fittings due to its high strength and ease of fabrication. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) o Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% o Applications: Ideal for low-temperature service in pressure vessels and pipelines, especially in cryogenic environments and cold climates. Applications of DIN 2567 Carbon Steel Flanges: • Oil & Gas Industry: Used in upstream and downstream operations, including pipelines, pressure vessels, and refineries. • Power Plants: Installed in high-pressure steam lines, water supply networks, and heat exchangers. • Water and Wastewater Systems: Suitable for potable water lines, sewage treatment, and distribution systems. • Chemical and Petrochemical Plants: Used in process piping systems carrying non-aggressive or mildly corrosive fluids. • Mechanical and HVAC Systems: Common in industrial construction for heating, ventilation, and air conditioning systems. Key Features: • Conforms to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • High tensile strength and impact resistance • Cost-effective solution for industrial and utility systems • Threaded design enables non-welded, easy assembly and maintenance • Suitable for welding, galvanizing, or surface coating • Supplied with test certificates, quality documentation, and full traceability Conclusion: DIN 2567 Carbon Steel flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for strength, affordability, and versatile performance. Ideal for use in industrial piping, mechanical assemblies, and infrastructure projects, these flanges deliver long-lasting service and simple installation. For custom dimensions, material grades, or technical inquiries, contact Ladhani Metal Corporation today.

DIN 2567 Monel flanges PN 25 and PN 40 are high-performance threaded flanges manufactured from copper-nickel-based alloys designed for excellent performance in highly corrosive environments, including seawater and acidic chemical systems. Built to DIN 2567 standards, these flanges offer outstanding resistance to corrosion, pitting, and stress cracking, making them ideal for use in marine engineering, chemical processing, and oil and gas industries. Ladhani Metal Corporation is a trusted manufacturer and exporter of Monel flanges, delivering precision-engineered components known for durability, high mechanical strength, and long service life. The threaded design allows for easy, weld-free installation, making these flanges ideal for maintenance-critical systems and environments requiring non-permanent joints. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for corrosion-prone systems requiring reliable mechanical performance and resistance to seawater and acids. • PN 40 (40 bar / 580 psi): Engineered for higher-pressure operations where both mechanical integrity and corrosion resistance are essential. Flange Types: • Threaded (Screwed) Flanges Allows easy installation and removal, especially in systems requiring regular maintenance. • Raised Face (RF) Flanges Enhances sealing performance under elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially when brittle or non-metallic components are involved. • Forged Threaded Flanges Provide superior strength, resistance to impact, and tight dimensional tolerances. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer specifications. Monel Grades and Composition: 1. Monel 400 (UNS N04400) o Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% o Applications: Used in marine components, pump shafts, heat exchangers, chemical processing units, and fuel and freshwater tanks due to its high corrosion resistance and strength in saltwater and acidic environments. 2. Monel K500 (UNS N05500) o Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% o Applications: Ideal for marine shafts, chemical plant equipment, pump parts, and oil well tools where both strength and corrosion resistance are required under high-stress conditions. Applications of DIN 2567 Monel Flanges: • Marine and Offshore: Exceptional resistance to seawater, brine, and marine atmospheres; ideal for shipbuilding and offshore platforms. • Chemical Processing: Suitable for handling strong acids such as hydrofluoric and sulfuric acid, and highly corrosive media. • Oil & Gas Industry: Used in sour gas service, valves, pumps, and tubing for high-pressure, corrosive extraction and transport systems. • Heat Exchangers and Condensers: Maintains structural integrity in high-temperature and corrosive heat transfer applications. • Power Generation: Applied in components exposed to aggressive fluids and fluctuating temperatures. Key Features: • Conforms to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • Excellent resistance to seawater, acids, and alkalis • High tensile and yield strength • Superior resistance to pitting, crevice, and stress corrosion cracking • Threaded design enables non-welded, easy assembly and maintenance • Supplied with test certificates, quality documentation, and full traceability Conclusion: DIN 2567 Monel flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for highly corrosive and high-performance environments. Whether used in offshore, chemical, or power systems, these flanges offer unmatched durability, corrosion resistance, and ease of installation. For custom dimensions, alloy grades, or technical consultation, contact Ladhani Metal Corporation today

DIN 2567 duplex flanges PN 25 and PN 40 are high-performance threaded flanges manufactured according to DIN 2567 standards, specifically engineered for applications requiring superior strength, corrosion resistance, and long service life in aggressive environments. These flanges are ideal for medium to high-pressure systems and are widely used in industries such as oil & gas, petrochemicals, marine, and wastewater treatment. Ladhani Metal Corporation is a trusted manufacturer and global supplier of duplex flanges, offering precision-machined components designed to withstand stress, temperature fluctuations, and corrosive operating conditions. The threaded configuration enables quick, weld-free assembly, making them suitable for systems requiring routine inspection or maintenance. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for demanding fluid systems operating under moderate to high pressure. • PN 40 (40 bar / 580 psi): Built to handle high-pressure flow systems and aggressive environments, ensuring safety and durability under load. Flange Types: • Threaded (Screwed) Flanges Allow for easy connection and disassembly without welding; ideal for maintenance-accessible systems. • Raised Face (RF) Flanges Enhances gasket performance by focusing sealing pressure in a smaller contact area. • Flat Face (FF) Flanges Common in systems using brittle or non-metallic materials, especially in low-to-medium pressure operations. • Forged Threaded Flanges Deliver greater mechanical strength and improved dimensional accuracy. • Custom-Machined Flanges Offered in customized sizes, pressure classes, and duplex material grades to meet project-specific needs. Duplex Steel Grades and Composition: 1. Duplex 2205 (UNS S31803 / S32205) o Composition:  Chromium (Cr): 21.0 – 23.0%  Nickel (Ni): 4.5 – 6.5%  Molybdenum (Mo): 2.5 – 3.5%  Manganese (Mn): ≤ 2.0%  Nitrogen (N): 0.14 – 0.20%  Carbon (C): ≤ 0.03%  Silicon (Si): ≤ 1.0%  Iron (Fe): Balance Applications: Used in desalination plants, offshore platforms, heat exchangers, and pressure vessels due to its excellent chloride stress corrosion cracking resistance and high mechanical strength. Applications of DIN 2567 Duplex Flanges: • Oil & Gas Industry: Used in pipeline systems, separators, and subsea manifolds • Chemical and Petrochemical Plants: Withstand aggressive chemical exposure, including acids and chlorides • Desalination and Marine Engineering: Excellent performance in saltwater environments • Power Plants: Durable for use in high-pressure steam and cooling water systems • Wastewater Treatment: Corrosion-resistant in sludge, brine, and industrial effluent pipelines • Pulp and Paper Industry: Withstands acidic environments and mechanical abrasion Key Features: • Manufactured as per DIN 2567 standard • Available with PN 25 and PN 40 pressure ratings • High yield strength and stress corrosion cracking resistance • Superior resistance to pitting, crevice corrosion, and chloride-rich environments • Excellent mechanical and fatigue properties under both static and dynamic loading • Supplied with inspection certificates, testing reports, and full material traceability • Compatible with internal linings, coatings, or passivation treatments Conclusion: DIN 2567 duplex flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for tough environments where standard stainless steel may fail. With their excellent strength, corrosion resistance, and long-term reliability, these flanges provide a safe and efficient connection solution for critical industrial systems. For detailed specifications, custom requirements, or bulk inquiries, reach out to Ladhani Metal Corporation today.

DIN 2566 duplex flanges PN 16 are high-performance, corrosion-resistant flanges designed for medium-pressure threaded piping systems. Manufactured in compliance with DIN 2566 standards, these flanges provide a reliable, non-welded connection ideal for environments where both strength and corrosion resistance are critical. Ladhani Metal Corporation is a manufacturer and exporter of duplex stainless steel flanges, offering precise machining, dimensional accuracy, and material traceability. With excellent mechanical properties and enhanced resistance to stress corrosion cracking and pitting, DIN 2566 duplex flanges are suitable for demanding applications across the oil & gas, petrochemical, marine, and power generation industries. Flange Types: • Threaded (Screwed) Flanges: Enable easy assembly and disassembly without welding, ideal for maintenance-intensive or temporary systems. • Raised Face (RF) Flanges: Improve gasket sealing by focusing pressure on a smaller surface area, reducing the risk of leakage. • Flat Face (FF) Flanges: Used with equipment having flat sealing surfaces, especially in systems using cast or non-metallic components. • Forged Threaded Flanges: Offer superior strength and impact resistance with consistent dimensional tolerance. • Custom-Machined Flanges: Tailored to meet specific application needs including pressure class, material grade, and sizing. Available Duplex Grades and Composition: 1. Duplex 2205 (UNS S31803 / S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% Applications: Used in environments with chloride exposure and aggressive chemical media, such as offshore platforms, desalination plants, pressure vessels, and structural piping systems. Applications of DIN 2566 Duplex Flanges: • Oil & Gas Pipelines: Resistant to sour service and high-pressure fluids • Chemical and Petrochemical Plants: Withstands corrosive chemicals and process fluids • Marine and Offshore Engineering: Ideal for seawater and salt-laden atmospheres • Power Plants: Used in high-temperature and high-pressure piping systems • Water Treatment and Desalination: Corrosion-free in brine and chlorinated water systems Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • Excellent corrosion and stress corrosion cracking resistance • High strength and toughness, even at low temperatures • Maintenance-friendly threaded design • Dimensional precision and smooth finish for leak-free operation • Supplied with test certificates, inspection reports, and full traceability Conclusion: DIN 2566 duplex flanges PN 16 from Ladhani Metal Corporation are engineered to deliver a perfect balance of strength and corrosion resistance in medium-pressure piping applications. Designed for long-term durability in harsh environments, these flanges offer dependable performance with minimal maintenance. For technical assistance, custom dimensions, or bulk orders, get in touch with Ladhani Metal Corporation today.