Ladhani Metal Corporation offers SS 310 Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from high-temperature austenitic stainless steel grade SS 310, these shields offer outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, making them suitable for extreme boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Half Round Tube Shields in various lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower impact • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of boiler steam circuits in aggressive environments • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent oxidation resistance – Withstands continuous service up to 1100°C • Superior scaling resistance – Performs well in cyclic temperature conditions • High chromium and nickel content – Enhances corrosion and heat resistance • Precision fit – Matches tube curvature for maximum shielding efficiency Applications • Power generation boilers – Long-term protection for reheater tubes under extreme thermal loads • Waste heat recovery systems – Safeguards tubes in erosive and high-temperature flue gas streams • Industrial steam plants – Maintains performance in fluctuating thermal cycles • Petrochemical furnaces – Suitable for aggressive reheating environments Conclusion The SS 310 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides exceptional high-temperature and oxidation-resistant protection for critical steam circuit components. Designed for precision fit, durability, and long service life, these shields reduce wear, minimize downtime, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield

Ladhani Metal Corporation offers 1Cr13 Boiler Half Round Tube Shields designed to provide robust protection for boiler and heat exchanger tubes operating in moderate temperature and mildly corrosive environments. Manufactured from martensitic stainless steel with a balanced chromium content, 1Cr13 offers good resistance to oxidation and corrosion, along with high mechanical strength and wear resistance. Its heat-treatable properties ensure excellent hardness and durability, making it suitable for extended service in demanding industrial conditions. They act as a protective layer against soot blower impact, abrasive flue gases, and particulate erosion, helping extend tube life and reduce maintenance frequency. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Boiler Half Round Tube Shields in a variety of sizes, lengths, and thicknesses to meet specific application requirements in both domestic and international markets. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.22% • Manganese (Mn): ≤ 0.60% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 0.60% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Best suited for boiler tubes in environments where moderate oxidation resistance, good mechanical strength, and abrasion resistance are required. Uses • Shields straight boiler tubes in superheater and reheater sections • Protects against soot blower erosion and abrasive flue gas particles • Ideal for medium-temperature service conditions • Extends operational life of boiler tubes in industrial applications Features • Good oxidation and corrosion resistance – Suitable for moderate temperature use • High mechanical strength – Maintains structural integrity under operational stress • Wear resistant – Withstands abrasive and erosive boiler environments • Accurate fitment – Precision half-round design for secure tube coverage • Multiple installation options – Suitable for welding, clamping, or banding • Export ready – Manufactured to international quality specifications Applications • Power generation boilers – Protects superheater and reheater tube sections • Industrial steam boilers – Reduces wear from soot blowing and flue gas flow • Waste heat recovery units – Provides protection in moderate heat zones • Pulp, paper, and textile industries – Ensures tube longevity under abrasive conditions Conclusion The 1Cr13 Boiler Half Round Tube Shield from Ladhani Metal Corporation combines mechanical strength, wear resistance, and moderate oxidation protection for reliable boiler tube safeguarding. Precision-formed for secure installation and manufactured to meet export standards, these shields are an effective solution for extending tube service life in diverse industrial environments. For customized sizing and global supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 410 Boiler Half Round Tube Shields designed to protect straight boiler and heat exchanger tubes from erosion, abrasion, and moderate corrosion in high-temperature service conditions. Manufactured from martensitic stainless steel grade SS 410, these shields provide good mechanical strength, wear resistance, and oxidation resistance, making them suitable for applications where tubes are exposed to flue gases, soot blower impact, and abrasive particles in thermal power plants, industrial boilers, and process heaters. The shields are precision-formed into a half-round profile to match standard tube diameters, ensuring secure coverage and consistent protection. SS 410 offers a cost-effective balance between heat resistance and mechanical durability, extending the operational life of boiler tubes while reducing maintenance downtime. Ladhani Metal Corporation manufactures, supplies, and exports SS 410 Boiler Half Round Tube Shields in a variety of lengths, diameters, and thicknesses to meet the needs of domestic and international projects. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for utility boilers, waste heat recovery boilers, process heaters, and other high-temperature units requiring erosion and oxidation protection. Uses • Shields straight tubes in industrial and power boilers • Protection from soot blower erosion and particulate abrasion • Suitable for dry flue gas areas with moderate corrosion levels • Used in process heaters and industrial furnaces • Ideal for cost-effective tube protection in medium-duty environments Features • Good oxidation resistance – Performs well in dry, high-temperature service • High mechanical strength – Resists wear and deformation under impact • Cost-effective protection – Balances durability with material economy • Precision fit – Half-round profile ensures close tube contact • Easy installation – Clamped, tack welded, or banded as required • Export quality – Manufactured to international dimensional and quality standards Applications • Thermal power plants – Shields economizer and superheater tubes • Waste heat recovery units – Protects against ash and particulate wear • Petrochemical industry – Used in process heaters and heat recovery boilers • Cement plants – Guards boiler tubes from abrasive kiln dust Conclusion The SS 410 Boiler Half Round Tube Shield from Ladhani Metal Corporation provides reliable, cost-effective tube protection in high-temperature environments where moderate corrosion resistance, high strength, and wear resistance are required. Available in custom sizes and export-grade specifications, these shields are an ideal choice for industrial and utility boiler systems worldwide. For technical details, custom orders, or international supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 304L Boiler Half Round Tube Shields designed to protect straight boiler tubes from high-temperature erosion, oxidation, and mechanical impact. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide superior corrosion resistance and improved weldability, making them ideal for applications where tubes are exposed to aggressive gases, thermal cycling, and post-weld environments. SS 304L minimizes the risk of intergranular corrosion and maintains mechanical strength in elevated temperatures. The shield features a precision-formed half-round profile that matches standard tube diameters for secure fitting and optimal protection. It serves as a physical barrier against soot blower blasts, high-velocity gas streams, and abrasive particulate matter, effectively extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses tailored to meet domestic and international boiler protection requirements. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Designed for use in boilers, HRSGs, WHRBs, and industrial heat systems operating in corrosive and high-temperature environments. Uses • Protection of straight tubes in power and process boilers • Installed in radiant and convection zones exposed to flue gas • Shields against erosion from soot blowers and fly ash • Suitable for post-weld environments requiring low carbon stainless steel • Used in chemical, food, and pharmaceutical industries Features • Excellent corrosion resistance – Performs well in oxidizing and corrosive atmospheres • Low carbon content – Prevents carbide precipitation during welding • High thermal stability – Resists deformation under continuous heating • Custom-fit profile – Precisely formed for close contact and effective shielding • Easy installation – Clamping, welding, or banding as required • Export-ready – Manufactured to meet global quality and dimensional standards Applications • Power generation boilers – Protection for superheater and economizer tubes • Chemical and fertilizer plants – Corrosion-resistant shielding in heat zones • Food and dairy processing – Suitable for hygienic and thermally stable conditions • Waste heat recovery systems – Effective in high-temperature gas paths Conclusion The SS 304L Boiler Half Round Tube Shield from Ladhani Metal Corporation offers dependable protection for boiler tubes operating in corrosive, high-temperature environments. With enhanced corrosion resistance, superior weldability, and custom manufacturing options, these shields provide a long-lasting solution for industrial and utility boiler systems. For orders, sizing, or technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers robust SS 410 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of 90-degree bends and U-bend tubes in boilers, heat exchangers, reheaters, and waste heat recovery systems. Manufactured from martensitic stainless steel grade SS 410, these shields provide excellent resistance to abrasion, scaling, and thermal fatigue, making them ideal for high-wear zones where mechanical durability is critical. The semi-cylindrical shield conforms to the outer arc of curved tubes, forming a physical barrier that prevents fly ash erosion, gas flow impingement, and high-temperature wear. Widely used in power plants and industrial steam systems, these shields ensure longer tube life and reduce unplanned maintenance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Outer Half Round 90 Degree Bend Tube Shields, offering custom-made solutions tailored to plant specifications and coil geometries. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for high-wear, moderately corrosive environments such as power boilers, WHRBs, HRSGs, and industrial heaters. Uses • Shielding 90-degree return bends in boilers and reheaters • Protecting U-bend tubes in WHRBs and flue gas systems • Guarding tube bends in waste heat sections of thermal processing units • Applied in environments where erosion from ash or particulate flow is prevalent Features • Excellent wear resistance – Ideal for abrasive service conditions • Thermal stability – Maintains strength and hardness at elevated temperatures • Mechanical durability – Withstands impact, vibration, and cyclic stresses • Accurate fit – Precision-shaped to match tube bend radius and diameter • Installation flexibility – Can be clamped, welded, or banded securely • Custom options – Available in various lengths, radii, and wall thicknesses Applications • Thermal power plants – Protects critical bend zones in high-ash areas • WHRBs and HRSGs – Used in exhaust recovery systems exposed to soot and gas flow • Petrochemical units – Applied in high-temperature reformers and heaters • Cement and process industries – Guards curved tube surfaces from scale and erosion Conclusion The SS 410 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation is a durable and cost-effective solution for protecting curved boiler and heat exchanger tubes in abrasive and thermal environments. With superior wear resistance and reliable mechanical strength, it extends service life and enhances equipment performance. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 420 Half Round Straight Tube Shields to provide strong, wear-resistant protection for straight tubes in boilers, economizers, heat exchangers, and steam systems. SS 420 is a high-carbon martensitic stainless steel known for its excellent hardness, high mechanical strength, and moderate corrosion resistance. These shields are ideal for environments involving particulate abrasion, dry flue gas flow, and mechanical wear. SS 420 Half Round Straight Tube Shield The SS 420 Half Round Straight Tube Shield is designed to cover the outer surface of straight tubes, forming a protective barrier that resists thermal shock, erosion, and oxidizing conditions. With a high carbon content, SS 420 offers improved hardness after heat treatment, making it suitable for applications requiring resistance to physical impact and abrasive wear. These shields are used in power generation, cement plants, petrochemical industries, and WHRB systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Straight Tube Shields, offering durable protection solutions for straight tubing under abrasive and high-stress conditions. Material Grade SS 420 – High-carbon martensitic stainless steel known for wear resistance, high strength, and fair corrosion resistance in dry or mildly corrosive atmospheres. Chemical Composition of SS 420 • Carbon (C): 0.15% max • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Used in areas exposed to ash erosion, dry high-velocity gases, and mechanical wear in thermal power and process industries. Uses • Protecting straight boiler tubes from fly ash and abrasive gas flow • Economizer and WHRB tube shielding in dusty, dry flue environments • Cement kiln waste heat boilers where high mechanical strength is needed • Process gas heating systems with dry or oxidizing exhaust • Steam pipelines in refining, sugar, and fertilizer units Features • Excellent wear resistance – High hardness for abrasive service • Heat treatable – Strength can be enhanced for specific applications • Moderate corrosion resistance – Performs well in dry gas systems • High strength – Suitable for high-pressure and mechanical load zones • Versatile design – Custom-manufactured for various tube diameters • Easy installation – Weld-on, clamp-on, and banded fixing options available Applications • power and utility boilers – Erosion protection in ash-laden flue paths • cement and lime plants – High-wear zones in preheaters and kilns • WHRBs – In systems recovering waste heat from industrial furnaces • steam generation systems – Protects steam tubes in dry environments • mechanical process systems – Applied where strength and surface hardness are critical Conclusion The SS 420 Half Round Straight Tube Shield from Ladhani Metal Corporation delivers strong mechanical protection and enhanced resistance to wear and erosion in dry, high-velocity, and abrasive environments. Its durability and strength make it an effective solution for extending tube service life in aggressive operating conditions. For dimensional customization and technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 410 Half Round Straight Tube Shields to offer cost-effective protection for boiler and heat exchanger tubes in moderate temperature and corrosive environments. SS 410 is a martensitic stainless steel that provides good corrosion resistance, mechanical strength, and wear resistance, making it suitable for shielding straight tubes exposed to flue gas erosion, ash deposits, and mild chemical exposure. SS 410 Half Round Straight Tube Shield The SS 410 Half Round Straight Tube Shield is designed to fit over the external surface of straight tubes, acting as a barrier against abrasive particles, high-velocity flue gases, and mechanical wear. It is widely used in power plants, waste heat recovery systems, and steam processing units where cost-effective protection is needed for tubes operating at medium temperatures. The material offers ease of fabrication and reliable resistance to oxidation up to 650°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Straight Tube Shields, delivering durable thermal protection for industrial piping systems. Material Grade SS 410 – Martensitic stainless steel known for its hardness, oxidation resistance, and moderate corrosion protection. Chemical Composition of SS 410 • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Iron (Fe): Balance Applications: Suitable for environments involving dry flue gases, fly ash, and light acidic fumes; commonly used in economizers and low-temperature steam sections. Uses • Straight tube protection in boilers and economizers • Installed in air preheaters and low-temperature superheaters • Applied in WHRBs to guard tubes from ash and erosion • Used in industrial steam systems with mild corrosion risk • Shields tubes in pulp, paper, and food processing units Features • Good oxidation resistance – Up to moderate temperatures (~650°C) • High hardness – Offers resistance against flue gas abrasion and ash impact • Cost-effective – Economical choice for medium-duty service • Easy to fabricate and weld – Suitable for various attachment methods • Customizable – Available in different sizes, lengths, and thicknesses • Enhances tube durability – Reduces wear and minimizes shutdowns Applications • thermal power plants – Used in low-heat sections for erosion protection • steam processing – Protects steam-carrying tubes from scale and impact • waste heat recovery units – Resists abrasive exhaust gases and particulate matter • cement and steel plants – Applied in dust-prone, dry gas environments • food and chemical industries – Suitable for non-aggressive process gas shielding Conclusion The SS 410 Half Round Straight Tube Shield from Ladhani Metal Corporation is a practical and robust solution for extending the life of tubes operating under dry, abrasive, and moderately corrosive service conditions. Its hardness and heat resistance make it ideal for protecting straight tube sections in a wide range of industrial systems. For standard and custom configurations, contact Ladhani Metal Corporation for technical consultation and orders.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to guard boiler tubes, heat exchangers, and superheaters against flue gas erosion, fly ash abrasion, scaling, and thermal fatigue. These shields are widely used in power generation, chemical processing, and industrial steam systems to extend the operational life of tubing in high-wear zones. The half-round profile ensures easy fitment over straight or curved tubes, especially in areas exposed to turbulent gas flow and ash impact. 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube The 1Cr18Ni9Ti Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, equivalent to AISI 321. This material offers excellent resistance to intergranular corrosion and high-temperature oxidation while maintaining good mechanical strength. Its titanium content improves stability during welding and long-term thermal exposure, making it especially suitable for Low Temperature Superheater (LTSH) applications in boilers and heat recovery systems where steam tubes are subject to moderate heat, soot, and particulate attack. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti Half Round Tube Shields for LTSH systems, offering reliable and corrosion-resistant protection for thermal and energy-related applications. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C% • Iron (Fe): Balance Applications: Ideal for LTSH areas and convection zones in boilers exposed to flue gas condensation, moderate corrosion, and thermal fatigue from cyclic operations. Uses • Installed on LTSH tubes to protect from scaling, soot erosion, and ash deposition in thermal power plants • Shields superheater coils and heat exchanger bends in WHRBs and HRSGs • Suitable for industrial boilers in chemical plants where acidic or chloride-bearing gases are present • Used in biomass and coal-fired systems to reduce wear on tube surfaces from fly ash and gas turbulence • Effective in marine and coastal steam generation systems with moisture and chloride exposure Features • Excellent intergranular corrosion resistance – Stabilized with titanium for weld integrity and long-term stability • High-temperature oxidation resistance – Performs well under cyclic heat exposure and oxidizing gas conditions • Custom fit – Manufactured to match exact tube diameter, curvature, and installation length • Easy to mount – Suitable for welding, clamping, or banding installation methods • Enhanced tube life – Reduces maintenance frequency and increases system efficiency • Available in various thicknesses, lengths, and bend radii as per operational needs Applications • thermal power stations – Protects LTSH tubes from scaling and ash erosion in flue gas zones • waste heat recovery units – Shields return tube bends and convection coils from abrasive flow • steam generation systems – Enhances tube life in low-temperature superheater environments • refinery boilers – Resists acidic gas effects and thermal stress in process heating units • utility boilers – Used in coal-fired and biomass-fired systems requiring long-term tube protection Conclusion The 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-performance protection for boiler and superheater tubes in low-temperature, corrosive, and abrasive environments. With titanium stabilization and excellent thermal durability, it ensures extended service life and improved system reliability in a range of industrial and thermal applications. For customized designs, technical consultation, or pricing details, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 304L U Type Outer Half Round Tube Shield The SS 304L U Type Outer Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel, SS 304L, offering enhanced weldability and resistance to intergranular corrosion. This shield is specifically designed to protect the outer curvature of U-bend tubes in high-temperature and moderately corrosive environments such as boilers, superheaters, and heat exchangers. The outer U-type configuration focuses on shielding the most exposed area of return bends from flue gas erosion, slag impact, and thermal oxidation. • Outer U Type Half Round Tube Shield – Provides targeted protection to the external arc of U-bend tubes, reducing surface degradation caused by hot gas streams and mechanical wear. Ladhani Metal Corporation supplies SS 304L U Type Outer Half Round Tube Shields with precision-engineered profiles to ensure long-term performance and durability in harsh industrial conditions. Chemical Composition of SS 304L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Well-suited for moderately corrosive, high-temperature environments where resistance to weld decay and oxidation is required. Uses • Protection of outer U-bend surfaces in superheaters and reheaters in thermal power generation systems • Shielding external arcs in heat exchangers and condensers in the chemical and petrochemical industries • Outer bend coverage in waste heat recovery boilers (WHRBs) and HRSGs exposed to flue gases and particulate flow • Used in marine, food-grade, and process steam systems where chloride resistance and cleanliness are important • Ideal for systems requiring excellent weldability and post-fabrication corrosion resistance Features • Excellent corrosion resistance – Low carbon content improves resistance to intergranular corrosion after welding or high-heat exposure. • Outer U-bend protection – Specifically shaped to guard the outer surface of U-bend tubes from high-temperature gas flow and slag contact. • High-temperature performance – Performs reliably in temperatures up to 870°C, resisting scale formation and oxidation. • Custom fit – Engineered to precisely match tube diameters and bend radii for a snug and stable fit without displacement. • Easy to install – Can be quickly mounted using clamps, stainless banding, or tack welds without requiring system downtime or disassembly. • Long service life – Withstands thermal cycling and corrosive gas exposure to minimize tube damage and maintenance intervals. Applications • power plants – Used in superheaters and reheaters for protecting the outer arcs of return bends from flue gas and heat-related scaling. • chemical processing – Shields tube surfaces in exchangers and preheaters that experience moderate chemical attack and thermal fatigue. • WHRBs and HRSGs – Installed on outer curves of U-bend tubes to prevent erosion and reduce downtime in heat recovery systems. • marine and coastal facilities – Suitable for salt-laden environments where chloride resistance is essential for sustained performance. • food, beverage, and clean process industries – Provides hygienic protection for tube bends in steam and thermal processing systems. Conclusion The SS 304L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation offers dependable protection for the most vulnerable outer surfaces of U-bend tubes in high-temperature and moderately corrosive applications. With its low-carbon alloy composition, it combines superior corrosion resistance with excellent weldability, making it ideal for power generation, petrochemical, marine, and process industries. Customizable to your system’s specifications, this shield ensures long-lasting performance, reduced maintenance, and improved system reliability. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.