DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2628 Carbon Steel flanges PN 250 are heavy-duty weld neck flanges manufactured in accordance with the DIN 2628 standard, designed for use in high-pressure systems operating up to 250 bar (3625 psi). These flanges are crafted from robust carbon steel grades, offering excellent mechanical strength, weldability, and cost-efficiency. With high tensile strength and good resistance to wear and fatigue, carbon steel flanges are ideal for structural and pressure-bearing applications in industries where corrosion is not a primary concern or where protective coatings are applied. Ladhani Metal Corporation supplies a comprehensive range of DIN 2628 PN 250 Carbon Steel flanges, engineered for demanding industrial environments. Known for precision machining, quality assurance, and consistent performance, our flanges are widely used in sectors such as oil and gas, power generation, water treatment, construction, and mechanical engineering. These flanges provide a reliable connection in pipeline systems that require durable performance under high pressure and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Designed for high-pressure applications that demand strength, durability, and tight sealing under elevated loads. Flange Type: • Weld Neck Flanges Equipped with a tapered hub that enhances mechanical stability and reduces stress concentration at the weld. Ideal for fluctuating temperatures and high-pressure service. • Flat Face (FF) Flanges Flat face design allows for even gasket compression, reducing the risk of leakage when connected to cast or brittle piping components. Carbon Steel Grades and Composition: Common Grades: ASTM A105, ASTM A350 LF2 ASTM A105 • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Forged carbon steel used in ambient and high-temperature service. Ideal for valves, fittings, and flanges in oil, gas, and industrial pipelines. ASTM A350 LF2 • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Low-temperature carbon steel suitable for cryogenic and sub-zero environments. Commonly used in pipeline systems, compressors, and pressure vessels. Applications of DIN 2628 Carbon Steel Flanges PN 250: • Oil and Gas Pipelines Used in high-pressure oil, gas, and petrochemical systems where strength and structural integrity are critical. • Power Generation Applied in steam and thermal power plants, including boiler systems and heat exchangers. • Mechanical and Structural Systems Suitable for heavy-duty machinery, process piping, and structural pipe connections. • Water Treatment and Distribution Utilized in potable water and wastewater infrastructure requiring reliable, high-strength components. • HVAC and Industrial Utilities Installed in heating, ventilation, and compressed air systems operating at elevated pressures. Key Features: • Complies with DIN 2628 standard for high-pressure flange applications • PN 250 rating supports high-load, high-stress operational conditions • Weld neck design for optimal flow and reduced weld stress • Flat face option for even gasket pressure and secure sealing • Available in ASTM A105 and A350 LF2 grades • High mechanical strength and excellent machinability • Cost-effective option for non-corrosive or coated environments • Custom sizes, finishes, and drilling patterns available upon request Conclusion: DIN 2628 Carbon Steel Flanges PN 250 by Ladhani Metal Corporation offer a durable, economical solution for high-pressure systems in a variety of industrial applications. With excellent mechanical strength and versatility, these flanges are engineered to perform reliably in demanding environments where corrosion resistance is secondary to pressure and structural requirements. Contact Ladhani Metal Corporation for specifications, technical assistance, or to request a custom quotation for your project needs.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2569 Carbon Steel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-strength carbon steel, designed to perform reliably in high-pressure and high-temperature industrial environments. Built to DIN 2569 standards, these flanges offer excellent mechanical strength, structural integrity, and thermal performance, making them ideal for use in industries such as oil and gas, power generation, petrochemical, construction, and general engineering. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, providing products that conform to stringent global standards. The welding neck design allows for permanent and high-integrity pipe connections, making these flanges particularly suitable for applications subject to pressure fluctuations, vibration, and thermal cycling. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems that require reliable sealing, robust mechanical strength, and thermal endurance in demanding industrial conditions. Flange Types: • Welding Neck Flanges Provide a tapered hub for stress distribution, ideal for high-pressure piping systems. • Raised Face (RF) Flanges Facilitates efficient gasket compression and sealing under elevated pressure and temperature. • Flat Face (FF) Flanges Used for connections with flat-faced components or non-metallic sealing materials. • Forged Welding Neck Flanges Offer enhanced strength, dimensional accuracy, and pressure resistance. • Custom-Machined Flanges Available in a wide range of sizes, pressure classes, and carbon steel grades to meet specific project needs. Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60–1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10–0.35% Applications: Commonly used in pressure systems, valves, and flanges for oil and gas and general-purpose industrial applications where temperature and pressure are moderate to high. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60–1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15–0.30% Applications: Ideal for low-temperature service, particularly in cryogenic or arctic environments in oil refineries, LNG plants, and chemical processing. 3. ASTM A516 Grade 70 (Pressure Vessel Quality Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.85–1.20% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.035% Applications: Used in boilers, pressure vessels, and heat exchangers where toughness and resistance to high-pressure and high-temperature conditions are essential. Applications of DIN 2569 Carbon Steel Flanges: • Oil and Gas Pipelines: Used for transporting crude oil, natural gas, and petroleum products under pressure. • Power Plants: Installed in steam lines, turbines, and heat recovery systems due to their thermal and mechanical reliability. • Petrochemical and Refinery Units: Applied in high-pressure processing systems and reactors. • Construction and Infrastructure: Used in water supply systems, fire protection networks, and structural piping. • HVAC and Mechanical Engineering: Employed in heating, ventilation, and air conditioning networks. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • High mechanical strength and impact resistance • Excellent weldability and structural integrity • Designed for permanent, high-pressure pipe connections • Supplied with test certificates, quality assurance documents, and traceability • Can be surface-treated with anti-corrosion coatings, galvanizing, or black painting Conclusion: DIN 2569 Carbon Steel Flanges PN 100 from Ladhani Metal Corporation are engineered to meet the demands of high-pressure industrial systems with strength, reliability, and cost-efficiency. Suitable for a wide range of applications across various sectors, these flanges are available in customizable sizes and material grades. For detailed specifications, bulk inquiries, or technical assistance, contact Ladhani Metal Corporation today

DIN 2568 Carbon Steel Flanges PN 64 are robust threaded flanges manufactured from high-strength carbon steel, specifically designed to deliver reliable performance in high-pressure industrial systems. Produced in accordance with DIN 2568 specifications, these flanges offer excellent mechanical strength, thermal conductivity, and impact resistance, making them well-suited for demanding applications in oil and gas, petrochemicals, water treatment, mechanical construction, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, offering products that comply with international quality standards and dimensional tolerances. The threaded design enables quick, weld-free installation and removal, making these flanges ideal for systems requiring ease of maintenance and rapid assembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered to withstand high-pressure environments and thermal variations in critical industrial applications. Flange Types: • Threaded (Screwed) Flanges Enable efficient installation without welding, ideal for systems requiring regular inspection or maintenance. • Raised Face (RF) Flanges Improve gasket sealing by concentrating pressure at the gasket area, ideal for high-pressure applications. • Flat Face (FF) Flanges Used in systems involving flat mating surfaces, particularly with brittle or non-metallic equipment. • Forged Threaded Flanges Provide excellent mechanical properties, dimensional accuracy, and durability under load. • Custom-Machined Flanges Available in various sizes, sealing surfaces, and material grades as per customer requirements. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Widely used in valve, pipe, and fitting assemblies in oil and gas, power, and chemical systems due to its strength, toughness, and weldability. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Ideal for cryogenic and low-temperature pressure systems such as pipelines, storage tanks, and vessel components operating in sub-zero climates. Applications of DIN 2568 Carbon Steel Flanges: • Oil and Gas Industry Utilized in upstream and downstream operations, including high-pressure pipelines, wellheads, and separators. • Power Plants Used in steam, cooling water, and high-pressure boiler systems. • Water and Wastewater Management Suitable for potable water lines, sewage treatment facilities, and utility piping systems. • Petrochemical and Refining Applied in process piping that handles non-aggressive or mildly corrosive fluids. • Mechanical and Structural Installations Common in HVAC systems, pressure vessels, and general mechanical piping networks. Key Features: • Manufactured as per DIN 2568 standard • Rated for PN 64 high-pressure applications • Excellent strength, impact resistance, and thermal conductivity • Threaded connection ensures quick and easy, weld-free assembly • Cost-effective and durable solution for industrial infrastructure • Supplied with test certificates, inspection reports, and full traceability • Compatible with galvanizing, coating, or welding processes as required Conclusion: DIN 2568 Carbon Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high performance in critical industrial environments. Offering high pressure resistance, mechanical durability, and easy installation, these flanges are an optimal solution for a wide range of piping systems. For custom sizes, material options, or technical consultation, contact Ladhani Metal Corporation today.

DIN 2567 Carbon Steel flanges PN 25 and PN 40 are robust threaded flanges manufactured from high-strength carbon steel, engineered to perform reliably in moderate to high-pressure applications. Built to DIN 2567 standards, these flanges offer excellent mechanical strength, durability, and thermal conductivity, making them suitable for general-purpose industrial systems such as oil and gas, water pipelines, power plants, and mechanical construction. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, delivering components that meet stringent international standards. The threaded design ensures quick, weld-free assembly, making these flanges ideal for systems requiring ease of installation and periodic disassembly. Pressure Ratings: • PN 25 (25 bar / 362 psi): Designed for industrial systems requiring strong mechanical performance and resistance to moderate pressure and temperature variations. • PN 40 (40 bar / 580 psi): Suitable for high-pressure piping systems and fluid-handling applications in power, oil & gas, and manufacturing sectors. Flange Types: • Threaded (Screwed) Flanges Allows easy installation and removal, especially in systems requiring regular maintenance. • Raised Face (RF) Flanges Enhances sealing performance under elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially when brittle or non-metallic components are involved. • Forged Threaded Flanges Provide superior strength, resistance to impact, and tight dimensional tolerances. • Custom-Machined Flanges Available in various sizes, pressure classes, and carbon steel grades as per customer specifications. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% o Applications: Widely used in oil and gas piping, power generation, valves, and fittings due to its high strength and ease of fabrication. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) o Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% o Applications: Ideal for low-temperature service in pressure vessels and pipelines, especially in cryogenic environments and cold climates. Applications of DIN 2567 Carbon Steel Flanges: • Oil & Gas Industry: Used in upstream and downstream operations, including pipelines, pressure vessels, and refineries. • Power Plants: Installed in high-pressure steam lines, water supply networks, and heat exchangers. • Water and Wastewater Systems: Suitable for potable water lines, sewage treatment, and distribution systems. • Chemical and Petrochemical Plants: Used in process piping systems carrying non-aggressive or mildly corrosive fluids. • Mechanical and HVAC Systems: Common in industrial construction for heating, ventilation, and air conditioning systems. Key Features: • Conforms to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • High tensile strength and impact resistance • Cost-effective solution for industrial and utility systems • Threaded design enables non-welded, easy assembly and maintenance • Suitable for welding, galvanizing, or surface coating • Supplied with test certificates, quality documentation, and full traceability Conclusion: DIN 2567 Carbon Steel flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for strength, affordability, and versatile performance. Ideal for use in industrial piping, mechanical assemblies, and infrastructure projects, these flanges deliver long-lasting service and simple installation. For custom dimensions, material grades, or technical inquiries, contact Ladhani Metal Corporation today.

DIN 2566 carbon steel flanges PN 16 are durable and cost-effective threaded flanges designed for medium-pressure piping systems. Manufactured according to DIN 2566 standards, these flanges offer reliable, weld-free connections suitable for a wide range of industrial applications. Their threaded design ensures easy installation and removal, especially in setups requiring frequent maintenance or modifications. Ladhani Metal Corporation is a leading manufacturer and exporter of carbon steel flanges, delivering precision-engineered components with high mechanical strength, toughness, and machinability. DIN 2566 carbon steel flanges are widely used across industries such as oil & gas, power generation, construction, and water treatment. Flange Types: • Threaded (Screwed) Flanges: Enable fast, non-welded assembly—ideal for maintenance-driven or temporary systems. • Raised Face (RF) Flanges: Improve gasket sealing by focusing pressure on a smaller contact area. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in low-to-medium pressure systems. • Forged Threaded Flanges: Provide enhanced strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Made to customer specifications including pressure class, size, or material variant. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Used in ambient and high-temperature pressure systems, including pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Designed for increased impact resistance at low temperatures. • Offers good weldability and strength retention in cryogenic or sub-zero conditions. Applications: Ideal for cold weather installations such as gas processing, refrigeration lines, and cryogenic piping systems. Applications of DIN 2566 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, compressor units, and flow control systems • Petrochemical Plants: Handles hydrocarbons and other industrial fluids • Power Plants: Suitable for steam, gas, and cooling water pipelines • Water & Wastewater Treatment: Cost-effective for fluid handling and filtration lines • Structural & Mechanical Systems: Common in HVAC, infrastructure, and general engineering Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • High tensile strength, ductility, and resistance to wear • Economical and versatile for general-purpose applications • Threaded design for quick, weld-free installation • Compatible with coatings and protective treatments • Supplied with test certificates, inspection reports, and full material traceability Conclusion: DIN 2566 carbon steel flanges PN 16 from Ladhani Metal Corporation are a dependable and budget-friendly solution for medium-pressure piping systems. Known for their mechanical strength, reliability, and ease of installation, these flanges are engineered to perform in a wide variety of industrial environments. For detailed specifications, customization, or large-volume orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 carbon steel flanges, designed to provide strong, reliable, and cost-effective connections in low-pressure piping systems. Manufactured in accordance with DIN 2565 standards and available in PN 6 pressure rating, these threaded flanges are ideal for non-welded piping setups, especially in maintenance-friendly or temporary installations. Carbon steel flanges offer a combination of durability, toughness, and affordability. Their versatility makes them a widely preferred choice across industries such as oil and gas, construction, power generation, water treatment, and general engineering applications. Flange Types: • Threaded (Screwed) Flanges: Designed for quick assembly without welding, ideal for applications requiring frequent dismantling or modifications. • Raised Face (RF) Flanges: Helps create a tighter seal by concentrating pressure on the gasket, minimizing leakage. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic components in low-pressure pipelines. • Forged Threaded Flanges: Forged for superior strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Tailored to meet specific customer requirements in terms of pressure class, dimensions, or material properties. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Carbon (C): ≤ 0.35% o Manganese (Mn): 0.60 – 1.05% o Phosphorus (P): ≤ 0.035% o Sulfur (S): ≤ 0.040% o Silicon (Si): 0.10 – 0.35% Applications: Widely used in pressure systems at ambient and higher temperatures. Suitable for oil & gas pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) o Designed for low-temperature service with added toughness and impact resistance. Applications: Used in cryogenic and sub-zero temperature systems, such as gas processing and cold storage piping. Applications of DIN 2565 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, valve connections, and flow systems. • Petrochemical and Refineries: Suitable for systems transporting hydrocarbons and chemicals. • Power Plants: Applied in steam, gas, and cooling water systems. • Water and Wastewater Treatment: Durable and cost-effective for fluid transport. • Structural and General Engineering: Commonly used in infrastructure, HVAC, and mechanical systems. Key Features: • Manufactured to DIN 2565 standard with PN 6 pressure rating • High mechanical strength with good ductility and toughness • Economical option for general-purpose piping systems • Easily machinable, weldable (if needed), and suitable for coatings • Delivered with test certificates, inspection reports, and material traceability Conclusion: DIN 2565 carbon steel flanges from Ladhani Metal Corporation offer dependable performance and excellent value across a wide range of applications. Known for their strength, versatility, and cost-effectiveness, these flanges are engineered to meet demanding project requirements. With strict quality control and precision manufacturing, our carbon steel flanges deliver consistent results for industrial and commercial systems. For specifications, custom requests, or bulk orders, get in touch with Ladhani Metal Corporation today.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation