DIN 2633 super duplex steel flanges PN 16 are high-performance weld neck flanges manufactured in accordance with the DIN 2633 standard. Engineered for medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are made from super duplex stainless steels, which offer a superior combination of high mechanical strength and outstanding corrosion resistance. They are specifically designed for critical applications in aggressive environments where standard stainless or duplex steels may not provide sufficient durability. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of super duplex steel flanges, known for precision manufacturing, strict quality control, and compliance with international material and dimensional standards. Each flange is tested for performance, safety, and resistance to harsh operating conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for systems requiring secure, corrosion-resistant, and high-strength connections under moderate pressure. Flange Type: • Weld Neck Flanges Featuring a long tapered hub, these flanges offer optimal stress distribution, reduce turbulence at the joint, and ensure reliable pipe alignment in high-stress environments. • Flat Face (FF) Flanges Designed for uniform gasket compression, particularly effective when used with soft gaskets or cast iron mating components. Super Duplex Steel Grades and Full Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Ideal for offshore platforms, subsea systems, desalination plants, chemical process systems, and high-chloride environments requiring superior corrosion and pitting resistance. Super Duplex S32760 • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Commonly used in seawater systems, heat exchangers, fire-fighting systems, and oil & gas equipment due to excellent resistance to erosion, stress corrosion cracking, and fatigue. Applications of DIN 2633 Super Duplex Steel Flanges PN 16: • Offshore Oil and Gas Platforms Resists chloride-induced corrosion and high mechanical loads in topside and subsea installations. • Desalination and Marine Systems Performs well in high-salinity environments where other alloys may suffer from pitting or crevice corrosion. • Chemical and Petrochemical Plants Suitable for handling strong acids, caustic solutions, and oxidizing environments at elevated temperatures and pressures. • Fire Protection and Water Injection Systems Ensures reliability and corrosion resistance in safety-critical and high-pressure fluid delivery systems. • Pulp and Paper Industry Used in bleach plant systems and recovery boilers where exposure to corrosive agents is routine. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for medium-pressure service • Weld neck design ensures secure, vibration-resistant connections • Available in high-strength super duplex grades S32750 and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength and fatigue resistance • Custom sizes, coatings, and pressure classes available upon request Conclusion: DIN 2633 super duplex steel flanges PN 16 from Ladhani Metal Corporation are designed to meet the most demanding operational requirements in highly corrosive and high-pressure environments. With unmatched strength and corrosion resistance, these flanges are ideal for offshore, marine, chemical, and industrial applications. For technical specifications, custom designs, or pricing information, contact Ladhani Metal Corporation today.

DIN 2630 Duplex flanges PN 2.5 are high-performance weld neck flanges manufactured to DIN 2630 standards, specifically designed for low-pressure applications up to 2.5 bar (36.25 psi). These flanges are made from Duplex stainless steels such as Duplex 2205 and Super Duplex 2507, which offer a balanced combination of high strength and excellent resistance to corrosion, stress corrosion cracking, and pitting. Engineered for demanding environments, these flanges provide long-lasting reliability in low-pressure systems exposed to aggressive chemicals and high temperatures. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Duplex flanges, known for consistent quality and technical expertise. Our DIN 2630 PN 2.5 Duplex weld neck flanges are widely used in offshore, chemical, petrochemical, and marine industries where both mechanical performance and corrosion resistance are essential. Each flange undergoes rigorous quality control to ensure conformance with international standards and application-specific requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure operations requiring enhanced strength and superior corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a tapered hub to evenly distribute stress and minimize erosion and turbulence in the flow path, making them suitable for high-integrity piping connections. • Flat Face (FF) Flanges Flat face flanges ensure even gasket compression and are ideal for use with cast equipment or non-metallic gasket materials in low-pressure systems. Duplex Grades and Full Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Combines high strength with excellent resistance to pitting and crevice corrosion. Common in chemical process plants, desalination systems, and marine structures. Applications of DIN 2630 Duplex Flanges PN 2.5: • Offshore and Marine Engineering Used in piping systems exposed to seawater and harsh marine environments where strength and corrosion resistance are vital. • Chemical and Petrochemical Industry Ideal for handling corrosive process fluids, acids, and chloride-rich environments at low pressure. • Desalination Plants Used in brine systems and piping exposed to high chloride levels and fluctuating temperatures. • Oil and Gas Industry Applied in low-pressure sections of oil rigs, refineries, and gas processing systems where reliability and resistance to sulfide stress cracking are critical. Key Features: • Compliant with DIN 2630 specifications • PN 2.5 rating suitable for low-pressure service • Weld neck design provides high-integrity and stress-distributed connections • Flat face option for soft gasket compatibility and uniform sealing • Manufactured from Duplex and Super Duplex stainless steels for enhanced performance • High strength-to-weight ratio and excellent corrosion resistance • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2630 Duplex Flanges PN 2.5 from Ladhani Metal Corporation are engineered for performance in corrosive, high-stress environments where low-pressure service demands superior materials. Combining the strength and corrosion resistance of Duplex and Super Duplex alloys, these flanges ensure long-term durability and safety across a variety of critical applications. Contact Ladhani Metal Corporation for detailed specifications, customization options, or pricing information.

DIN 2628 stainless steel flanges PN 250 are precision-engineered weld neck flanges manufactured according to the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are essential for maintaining strength and leak-free connections in critical piping systems. Made from premium stainless steel grades such as 304, 316, and 321, these flanges offer exceptional mechanical stability, corrosion resistance, and durability under severe industrial operating conditions. Ladhani Metal Corporation is a leading manufacturer and supplier of stainless steel flanges. Our DIN 2628 PN 250 weld neck flanges are trusted in demanding sectors including oil and gas, chemical plants, marine engineering, energy infrastructure, and high-pressure process systems for their consistent quality and dependable performance. Pressure Rating: • PN 250 (250 bar / 3625 psi): Engineered for high-pressure piping systems requiring superior joint integrity and long-term sealing reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub for high-stress applications. These flanges ensure smooth flow transition and minimize turbulence and erosion in the pipe system. • Flat Face (FF) Flanges Flat face design ensures uniform gasket compression and is suitable for systems using cast components or where flange distortion must be avoided. Stainless Steel Grades and Full Composition: Stainless Steel 304 / 304L (UNS S30400 / S30403) • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose corrosion resistance. Commonly used in food processing, water treatment, and chemical piping. Stainless Steel 316 / 316L (UNS S31600 / S31603) • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent resistance to chloride environments and acidic media. Widely used in marine, pharmaceutical, and chemical process plants. Stainless Steel 321 (UNS S32100) • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Titanium-stabilized alloy suited for high-temperature service and excellent resistance to intergranular corrosion. Common in thermal processing and aerospace exhaust systems. Applications of DIN 2628 Stainless Steel Flanges PN 250: • Oil and Gas Sector Used in pressure-critical pipelines, wellheads, and refining equipment. • Chemical and Petrochemical Industry Ideal for corrosive chemical service lines and pressurized chemical tanks. • Marine and Offshore Applications Used in seawater systems and high-pressure marine piping. • Energy and Power Generation Applied in steam, boiler, and high-pressure turbine piping systems. Key Features: • Compliant with DIN 2628 standards • PN 250 pressure class for high-pressure service • Weld neck design for optimal stress distribution • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face option for uniform sealing and flange safety • Corrosion-resistant and robust under mechanical loads • Applicable in aggressive chemical, marine, and high-temperature environments • Custom sizes, materials, and finishes available upon request Conclusion: DIN 2628 Stainless Steel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure operations where integrity, reliability, and corrosion resistance are paramount. Available in a range of stainless steel materials including 304, 316, and 321, these weld neck flanges provide superior sealing and strength across demanding industrial sectors. Contact Ladhani Metal Corporation for custom solutions, technical assistance, or a detailed quotation.

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2573 Stainless Steel Flanges PN 6 are precision-manufactured flat flanges made from high-grade stainless steel, designed for low-pressure applications across a broad range of industrial sectors. Compliant with DIN 2573 standards, these flanges provide excellent corrosion resistance, mechanical reliability, and compatibility with standard piping systems. They are commonly used in non-critical, low-pressure environments in industries such as water treatment, HVAC, food processing, and general utility piping systems. Ladhani Metal Corporation is a reputable manufacturer and exporter of stainless steel flanges, offering components that adhere to international quality benchmarks. The flat flange design simplifies assembly and disassembly, making these flanges a practical choice for systems requiring easy maintenance and reliable sealing at lower pressure ranges. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure systems where moderate sealing performance and corrosion resistance are essential. Flange Types: • Plate Flanges Used in low-pressure piping systems for simple bolted connections with gaskets. • Flat Face (FF) Flanges Ideal for use with cast iron equipment or non-metallic gaskets to ensure uniform surface contact. • Slip-On Flanges Designed for ease of installation by sliding over the pipe and welding both sides for moderate sealing. • Custom-Machined Flanges Available in specific dimensions and stainless steel grades as per customer specifications and operational requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Used in water supply lines, food-grade piping, and low-pressure process lines due to its hygienic properties and corrosion resistance. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Suited for mildly corrosive environments including water filtration systems and food-grade tanks. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Applicable in moderately high temperatures or where intergranular corrosion resistance is important, such as thermal pipelines and heating systems. Applications of DIN 2573 Stainless Steel Flanges: • Water Distribution and Treatment Systems: Used in potable and waste water systems, ensuring non-reactive and rust-resistant performance. • HVAC and Building Installations: Employed in air ducts, chilled water lines, and other HVAC components where low-pressure performance is sufficient. • Food and Beverage Processing: Chosen for hygienic piping setups in non-pressurized fluid transfer applications. • Industrial Utility Lines: Integrated into auxiliary piping systems for lubricants, cooling water, and drainage. • Agricultural and Irrigation Systems: Used in low-pressure pumping and irrigation lines due to their corrosion resistance and ease of installation. Key Features: • Manufactured in compliance with DIN 2573 standard • PN 6 pressure rating suitable for non-critical systems • Excellent corrosion resistance with hygienic surface options • Flat and slip-on configurations for simplified assembly • Available in 304, 316, 321, and other stainless steel grades Conclusion: DIN 2573 Stainless Steel Flanges PN 6 by Ladhani Metal Corporation offer a cost-effective and reliable solution for low-pressure applications. Their corrosion-resistant material, ease of installation, and compliance with international standards make them ideal for various general-purpose industrial systems. For tailored configurations, specific material grades, or technical support, contact Ladhani Metal Corporation.

DIN 2569 Stainless Steel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-quality stainless steel, designed for reliable performance in high-pressure industrial applications. Built to DIN 2569 standards, these flanges offer superior corrosion resistance, mechanical strength, and thermal stability, making them suitable for use in critical systems across industries such as chemical processing, pharmaceuticals, marine engineering, food and beverage, and water treatment. Ladhani Metal Corporation is a trusted manufacturer and exporter of stainless steel flanges, providing products that meet rigorous international standards. The welding neck design allows for strong, permanent connections, making these flanges particularly valuable in systems requiring high structural integrity and resistance to pressure and temperature fluctuations. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring excellent sealing performance, mechanical reliability, and corrosion resistance in aggressive or demanding environments. Flange Types: • Welding Neck Flanges Ensure high-strength, welded connections ideal for systems with continuous pressure and thermal cycling. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Welding Neck Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and stainless steel grades tailored to customer requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Commonly used in food processing, water treatment, and mild chemical applications due to its excellent corrosion resistance and weldability. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Ideal for corrosive environments such as marine, chemical, and offshore industries due to its enhanced resistance to chlorides and acids. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Suitable for high-temperature applications, including exhaust systems and thermal processing equipment, offering improved resistance to intergranular corrosion. Applications of DIN 2569 Stainless Steel Flanges: • Chemical and Petrochemical Plants: Used in corrosive process environments where stainless steel’s durability is essential. • Marine and Offshore Engineering: Ideal for saltwater exposure and harsh weather conditions. • Pharmaceutical and Food Processing: Used in hygienic systems that require corrosion resistance and easy cleaning. • Water and Wastewater Systems: Employed in potable and industrial water lines, offering rust-free performance. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Superior corrosion resistance and mechanical integrity • Strong welded neck design for permanent, high-pressure connections • Compatible with various sealing surfaces and pipe connections • Available with test certifications, quality documentation, and traceability • Suitable for polishing, pickling, passivation, and custom surface treatments Conclusion: DIN 2569 Stainless Steel Flanges PN 100 from Ladhani Metal Corporation are engineered for high-pressure performance, long-term durability, and structural strength. Designed for a variety of demanding industrial and mechanical applications, these flanges offer reliable service and are available in customizable specifications. For custom sizes, material grades, or technical consultations, contact Ladhani Metal Corporation today

DIN 2568 Stainless Steel Flanges PN 64 are precision-engineered threaded flanges manufactured from high-quality stainless steel, designed for reliable performance in high-pressure industrial applications. Built to DIN 2568 standards, these flanges offer superior corrosion resistance, mechanical strength, and thermal stability, making them suitable for use in critical systems across industries such as chemical processing, pharmaceuticals, marine engineering, food and beverage, and water treatment. Ladhani Metal Corporation is a trusted manufacturer and exporter of stainless steel flanges, providing products that meet rigorous international standards. The threaded design allows for fast, weld-free assembly and disassembly, making these flanges particularly valuable in systems requiring frequent maintenance or installation flexibility. Pressure Rating: • PN 64 (64 bar / 928 psi): Specifically designed for high-pressure systems requiring excellent sealing performance, mechanical reliability, and corrosion resistance in aggressive or demanding environments. Flange Types: • Threaded (Screwed) Flanges Allows convenient assembly and disassembly, ideal for systems requiring regular access. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Threaded Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and stainless steel grades tailored to customer requirements. Stainless Steel Grades and Composition: 1. ASTM A182 F304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Commonly used in food processing, water treatment, and mild chemical applications due to its excellent corrosion resistance and weldability. 2. ASTM A182 F316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Ideal for corrosive environments such as marine, chemical, and offshore industries due to its enhanced resistance to chlorides and acids. 3. ASTM A182 F321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Suitable for high-temperature applications, including exhaust systems and thermal processing equipment, offering improved resistance to intergranular corrosion. Applications of DIN 2568 Stainless Steel Flanges: • Chemical and Petrochemical Plants: Used in corrosive process environments where stainless steel’s durability is essential. • Marine and Offshore Engineering: Ideal for saltwater exposure and harsh weather conditions. • Pharmaceutical and Food Processing: Used in hygienic systems that require corrosion resistance and easy cleaning. • Water and Wastewater Systems: Employed in potable and industrial water lines, offering rust-free performance. • HVAC and Mechanical Systems: Integrated in industrial air, heating, and cooling networks requiring long-lasting service. Key Features: • Manufactured to DIN 2568 standard • Available in PN 64 pressure rating • Superior corrosion resistance and mechanical integrity • Weld-free, threaded design for easy installation and disassembly • Compatible with various sealing surfaces and pipe connections • Available with test certifications, quality documentation, and traceability • Suitable for polishing, pickling, passivation, and custom surface treatments Conclusion: DIN 2568 Stainless Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high-pressure performance, long-term durability, and ease of installation. Designed for a variety of demanding industrial and mechanical applications, these flanges offer reliable service and are available in customizable specifications. For custom sizes, material grades, or technical consultations, contact Ladhani Metal Corporation today.

DIN 2543 Monel Flanges are flanges made from Monel, a group of nickel-copper alloys that are known for their excellent corrosion resistance, particularly in marine environments and chemical processing industries. Monel alloys are also highly resistant to acidic and alkaline conditions, which makes them ideal for applications in harsh environments. Material: Typically made from Monel 400 or Monel K-500, which are the most common grades of Monel alloys. Pressure Rating (PN16): Rated for 16 bar (approximately 232 psi) at 20°C (68°F), suitable for medium-pressure systems. Key Features of DIN 2543 Monel Flanges: Corrosion Resistance: Monel alloys, especially Monel 400, are highly resistant to corrosion, including in seawater, acids, and alkaline solutions. This makes them ideal for use in marine, chemical, and offshore oil environments. Strength and Durability: Monel alloys offer high strength and excellent tensile strength even at elevated temperatures. The materials maintain their integrity and resilience in harsh environments, ensuring long-term durability. Weldability: Monel alloys are weldable, but care must be taken during the welding process to ensure that there is no loss of material properties. Proper heat treatment may be required to maintain corrosion resistance and strength. Temperature Resistance: Monel alloys have excellent performance at both high and low temperatures. They can be used in a wide range of environments, including cryogenic temperatures and elevated heat applications. Types of Monel Flanges (DIN 2543): Weld Neck Flanges (WN): These flanges have a tapered neck, which is welded to the pipe. This provides additional strength and is used in applications that require high pressure or high-temperature resistance. Slip-On Flanges (SO): These flanges slide over the pipe and are welded both inside and outside. They are easy to install and commonly used in medium-pressure systems. Blind Flanges (BL): These flanges are used to seal the end of a piping system. They prevent fluid flow and are typically used in applications where future maintenance or modifications may be required. Socket Weld Flanges (SW): These flanges have a socket in which the pipe is inserted and welded. This type is used for small-bore applications in high-pressure systems. Lap Joint Flanges (LJ): These flanges are used with a lap joint stub end and are ideal for systems that require easy alignment and disassembly. They are often used in applications where frequent maintenance is necessary. Common Monel Grades for DIN 2543 Flanges: Monel 400: Composition: Approximately 63% nickel, 29% copper, with small amounts of iron, manganese, and silicon. Properties: Exceptional resistance to corrosion, especially in seawater and other marine environments. Excellent resistance to acids and alkalines, making it suitable for chemical processing applications. High tensile strength and good mechanical properties at both high and low temperatures. Monel K-500: Composition: Similar to Monel 400, but with additional aluminum and titanium, which provide higher strength and greater resistance to corrosion. Pressure Rating (PN16): PN16 refers to the pressure rating of 16 bar (approximately 232 psi) at 20°C (68°F).

DIN 2527 Carbon Steel (C.S.) Blind Flanges are designed to seal the ends of pipes or vessels in industrial piping systems where no further connection is required. These blind flanges are made from carbon steel, which is known for its strength, durability, and cost-effectiveness. The DIN 2527 standard ensures that these flanges meet precise dimensional and mechanical requirements for reliability under various industrial conditions. Material Composition of Carbon Steel (C.S.) Blind Flanges: The material used in DIN 2527 carbon steel blind flanges typically includes carbon steel grades like St 37, St 52, or A105, which are commonly used for pressure-containing parts in piping systems. The general composition of carbon steel includes: Carbon (C): 0.05% to 0.25% – Provides strength and hardness. Manganese (Mn): 0.30% to 0.90% – Enhances toughness and strength. Silicon (Si): 0.10% to 0.60% – Adds strength and hardness. Phosphorus (P): Up to 0.04% – Ensures better toughness and workability. Sulfur (S): Up to 0.05% – Keeps the material ductile and machinable. Iron (Fe): The remainder of the material – Makes up the base composition. These carbon steel grades provide excellent mechanical properties, such as strength, ductility, and weldability, making them suitable for a wide range of applications in moderate temperature and pressure environments. Key Features of DIN 2527 Carbon Steel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: Carbon steel can withstand temperatures up to 400°C (752°F) without significant degradation. It is ideal for moderate temperature applications. Pressure Tolerance: DIN 2527 carbon steel blind flanges come with pressure ratings such as PN6, PN10, PN16, PN25, and higher, ensuring they can safely handle pressure in piping systems. Corrosion Resistance: Carbon steel is not highly resistant to corrosion, especially in moisture, chlorides, or acidic environments. To enhance the corrosion resistance, these flanges can be galvanized or coated (with zinc or paint), which helps in increasing their durability in mildly corrosive environments. Strength and Durability: Carbon steel offers high strength and good toughness under moderate stress and pressure conditions. It is stronger than mild steel, providing a reliable seal for general industrial use. Dimensional Accuracy and Pressure Class: The DIN 2527 standard ensures precise dimensional accuracy, enabling easy and reliable installation. Carbon steel blind flanges come in different pressure ratings like PN6, PN10, PN16, and PN25, providing flexibility based on the system's pressure requirements. Design and Types of DIN 2527 Carbon Steel Blind Flanges: Standard Blind Flange (Type A): A solid circular flange used for general isolation of pipeline sections where no further connection is needed. Flat-Faced Blind Flange: This flange features a flat sealing surface, making it suitable for low-pressure systems or applications where a tight seal is not required. Raised Face Blind Flange: Has a raised surface for a better seal in medium-to-high-pressure systems, where the flange is bolted to a matching raised face of another flange. Ring-Type Joint (RTJ) Blind Flange: Used in high-pressure systems, this flange has a groove that holds an RTJ gasket, offering a superior seal under high-pressure conditions. Long Weld Neck Blind Flange: Features an extended neck for welding to the pipe, providing additional strength and making it suitable for high-pressure or high-stress applications. Nominal Diameter: Available in a wide range of nominal diameters (e.g., DN10, DN50, DN150, DN600), ensuring compatibility with different pipe sizes and system requirements.