DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2545 carbon steel flanges supplied by Ladhani Metal Corporation are designed for use in a variety of industrial applications requiring strength, durability, and resistance to corrosion under moderate temperatures and pressures. These flanges are made from high-quality carbon steel, offering excellent mechanical properties and weldability, making them suitable for both low- and high-pressure systems. With a pressure rating of PN 40, these flanges are built to withstand pressures up to 40 bar, ensuring secure and leak-free connections in demanding applications across different industries, including chemical processing, power generation, and construction. Types of DIN 2545 Carbon Steel Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface and are primarily used in low-pressure applications where uniform distribution of sealing force is required. Raised Face Flanges (RF) – These flanges feature a raised surface around the bolt holes, providing enhanced sealing pressure, making them ideal for high-pressure applications. Ring-Type Joint (RTJ) Flanges – These flanges are designed with a groove to accommodate a metal sealing ring, providing a more secure seal for high-pressure systems or environments involving high temperatures. Grades and Chemical Composition: Carbon Steel A105 Chemical Composition: C: 0.35%, Mn: 0.60-0.90%, P: 0.035% max, S: 0.035% max, Si: 0.10-0.35%, Fe: balance A105 is the most commonly used grade of carbon steel for flanges, offering good strength and impact resistance. It is suitable for low to medium-pressure applications and is widely used in the manufacturing of flanges for piping systems, valves, and fittings. This grade is known for its versatility and ease of welding. Carbon Steel A350 LF2 Chemical Composition: C: 0.30%, Mn: 1.00-1.50%, P: 0.035% max, S: 0.035% max, Si: 0.10-0.35%, Fe: balance A350 LF2 is a low-temperature carbon steel grade designed for use in cryogenic and low-temperature applications. It offers good toughness and is resistant to brittle fracture in environments where temperatures are lower than standard carbon steel materials can withstand. A350 LF2 is commonly used in the oil, gas, and power generation industries. PN 40 Pressure Rating: The "PN" rating defines the flange's pressure capacity. PN 40 indicates that the flange is capable of handling pressures up to 40 bar, making it suitable for high-pressure systems in various industrial applications that require secure and durable connections. Applications: 1. Oil and Gas Industry: Pipelines and Transport Systems: Carbon steel flanges are commonly used in oil and gas pipelines to connect sections of pipe, valves, and other components. They provide a reliable seal and are capable of handling high pressures and extreme temperatures. Refineries and Petrochemical Plants: Carbon steel flanges are used in refining processes and in the transportation of crude oil and natural gas. They withstand the mechanical stresses and corrosion from various chemicals. Offshore Platforms: These flanges are used in offshore oil platforms where they handle high-pressure conditions in subsea pipelines and other critical infrastructure. 2. Chemical and Petrochemical Industry: Chemical Processing Equipment: Carbon steel flanges are used in reactors, heat exchangers, and distillation columns where the materials are exposed to high-pressure chemicals. They are preferred in systems that handle neutral or moderately corrosive chemicals. Pipelines for Chemical Transport: Used in chemical plants to transport fluids that are not highly corrosive, carbon steel flanges are durable and reliable in these settings. 3. Power Generation: Steam and Gas Turbines: Carbon steel flanges are widely used in power plants, especially in steam and gas turbines, where high pressure and temperatures are present. Cooling Systems: These flanges are found in cooling water systems, heat exchangers, and other systems where water or air is circulated to cool equipment. 4. Water Treatment Plants: Water Distribution Systems: Carbon steel flanges are commonly used to connect pipes in water distribution systems, especially in municipal water treatment and sewage treatment plants. Desalination Plants: These flanges are also employed in desalination plants, where seawater is converted into fresh water, due to their strength and ability to handle high-pressure environment. Conclusion: Ladhani Metal Corporation ensures the production of these carbon steel flanges meets the highest standards of quality and precision, ensuring long-term durability and reliable performance in even the most demanding applications. Each flange is manufactured according to strict specifications and undergoes thorough testing to guarantee safe and reliable operation in high-pressure environments. #din2545 #din2545flanges #din2545carbonsteelflanges #flanges #flangessupplier

DIN 2545 Monel flanges, provided by Ladhani Metal Corporation, are designed to offer exceptional strength and outstanding resistance to corrosion, particularly in harsh environments. Monel alloys, primarily composed of nickel and copper, are known for their ability to withstand the corrosive effects of seawater, acids, and alkalis. These flanges are ideal for high-performance applications in industries such as marine, chemical processing, and oil and gas. With a pressure rating of PN 40, these flanges are capable of handling pressures up to 40 bar, ensuring reliable, leak-free connections in high-pressure systems. Types of DIN 2545 Monel Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface that provides uniform distribution of sealing pressure, making them suitable for low-pressure systems or where precise sealing is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes to provide higher sealing pressure, ideal for high-pressure environments. Ring-Type Joint (RTJ) Flanges – These flanges are designed with a groove to accommodate a metal sealing ring, suitable for applications that require resistance to high pressure and high temperatures. Grades and Chemical Composition: Monel 400 (UNS N04400) Chemical Composition: Ni: 63%, Cu: 28-34%, Fe: 2.5%, Mn: 2%, C: 0.3%, Si: 0.5% Monel 400 is a nickel-copper alloy known for its excellent resistance to corrosion, particularly in seawater and chemical environments. It offers good mechanical properties at both subzero and elevated temperatures. This alloy is commonly used in marine applications, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Chemical Composition: Ni: 63%, Cu: 27%, Al: 2.3-3.15%, Ti: 0.35-0.85%, Fe: 2.5%, C: 0.3%, Mn: 1.5% Monel K500 is an age-hardenable nickel-copper alloy that provides additional strength and hardness compared to Monel 400. It offers outstanding corrosion resistance, particularly in seawater and high-stress environments, making it suitable for use in marine, oil and gas, and aerospace applications. PN 40 Pressure Rating: The "PN" rating refers to the flange's pressure capacity. PN 40 indicates that the flange is rated for pressures up to 40 bar, making it ideal for high-pressure systems where secure and durable connections are essential. Applications: 1. Marine and Offshore Applications: Seawater Systems: Monel is highly resistant to seawater corrosion, making it ideal for use in marine applications, such as seawater cooling systems, pumps, valves, and heat exchangers on ships and offshore platforms. Offshore Pipelines and Risers: Monel flanges are commonly used in subsea pipelines and risers due to their resistance to corrosion from saltwater and high-pressure conditions found in offshore oil and gas operations. 2. Chemical Processing Industry: Acidic Environments: Monel flanges offer superior resistance to various acidic solutions, making them ideal for use in chemical processing plants, especially where sulfuric acid, hydrochloric acid, and other corrosive chemicals are present. Piping Systems: Used in pipelines and reactors that transport corrosive chemicals, Monel flanges ensure long-term reliability and strength in harsh environments. 3. Oil and Gas Industry: Petrochemical Refineries: Monel flanges are used in refining operations, including in heat exchangers, pumps, and piping systems that handle hydrocarbon fluids, ensuring resistance to both pressure and corrosion. Subsea Equipment: Monel is also used in subsea exploration and production equipment due to its ability to withstand harsh marine environments and high-pressure systems. Conclusion : Ladhani Metal Corporation ensures that all Monel flanges meet stringent quality standards and are manufactured to exact specifications, ensuring durability and reliability in even the most challenging environments. Each flange undergoes comprehensive testing to guarantee long-lasting performance and safe operation in high-pressure applications. #din2545 #din2545flanges #din2545monelflanges #flanges #flangessupplierinmumbai

DIN 2545 Inconel flanges are engineered for superior strength, excellent resistance to high temperatures, and remarkable corrosion resistance in extreme environments. Ladhani Metal Corporation provides these high-quality flanges made from Inconel alloys, known for their ability to endure elevated temperatures, oxidation, and corrosive conditions. These flanges are ideal for industries where performance under high-temperature stress and resistance to harsh environments are essential, such as aerospace, chemical processing, power generation, and marine. Types of DIN 2545 Inconel Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates uniform distribution of the sealing force, making them ideal for low-pressure systems or when a secure seal is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes, providing enhanced sealing pressure, making them suitable for high-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are ideal for applications requiring resistance to high pressure and high temperatures. Grades and Chemical Composition: Inconel 600 (UNS N06600) Chemical Composition: Ni: 72%, Cr: 14-17%, Fe: balance, Mn: 1%, Si: 0.5%, C: 0.15% Inconel 600 is known for its excellent resistance to oxidation and corrosion at elevated temperatures. It is widely used in applications like furnace components, chemical processing, and nuclear reactors, offering high strength and good workability. Inconel 625 (UNS N06625) Chemical Composition: Ni: 58%, Cr: 20-23%, Mo: 8-10%, Fe: 5%, Nb: 3.15-4.15%, Ti: 0.4-1% Inconel 625 is a nickel-based alloy that offers superior resistance to high-temperature oxidation and corrosion. It provides exceptional resistance to pitting and crevice corrosion, making it ideal for applications in aerospace, marine, and chemical industries, where high temperatures and corrosive environments are common. Inconel 718 (UNS N07718) Chemical Composition: Ni: 50-55%, Cr: 17-21%, Fe: 0-5%, Mo: 2.8-3.3%, Nb+Ta: 4.75-5.5%, Ti: 0.65-1.15%, Al: 0.2-0.8% Inconel 718 is a high-strength, corrosion-resistant alloy widely used in high-temperature applications. It is designed for use in extreme conditions, offering excellent resistance to oxidation, sulfidation, and high-temperature environments. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. PN 40 refers to flanges that are designed to withstand pressures up to 40 bar, making them suitable for high-pressure systems where secure, leak-free connections are essential. Applications: Aerospace Industry: Jet Engines and Turbomachinery: Inconel flanges are commonly used in aerospace applications, including jet engines and turbine systems, where components are exposed to extremely high temperatures and pressures. They provide excellent resistance to heat and corrosion in high-stress environments. Exhaust Systems: Inconel's ability to withstand high temperatures makes it ideal for use in exhaust systems of aircraft engines. 2. Power Generation Industry: Gas Turbines: Inconel flanges are used in gas turbines in power plants, particularly in components that operate at high temperatures, such as turbine blades, combustors, and other critical parts. Nuclear Power Plants: Inconel is used in the construction of components for nuclear reactors, where heat and radiation resistance are crucial. It is used in piping, valves, and other systems exposed to high-temperature nuclear environments. 3. Chemical Processing and Petrochemical Industries: High-Temperature Reactors: Inconel flanges are used in reactors, heat exchangers, and other equipment in the chemical industry that handle aggressive, high-temperature chemical reactions, including those with sulfuric acid, chlorine, and other corrosive substances. Petrochemical Refineries: Inconel is used in systems where high temperatures and reactive chemicals are present, offering superior performance in handling corrosive materials such as acids and hydrocarbons. 4. Oil and Gas Industry: Offshore Platforms: Inconel flanges are widely used in offshore oil and gas platforms, particularly in subsea pipelines, risers, and pressure vessels, where high resistance to both high pressure and corrosion (especially from seawater) is necessary. Wellhead Equipment: Inconel flanges are also used in downhole equipment and wellhead connections that need to resist high-pressure environments and exposure to extreme temperatures. Ladhani Metal Corporation ensures that each Inconel flange is produced to the highest standards of quality and precision, adhering to international specifications. Every flange undergoes thorough testing to meet the required durability and performance standards, providing reliable solutions for critical applications in the most challenging environments. #din2545 #din2545flanges #din2545inconelflanges #flanges #flangessupplier

DIN 2545 Super Duplex flanges are specifically designed to offer outstanding strength and resistance to corrosion, especially in highly aggressive environments. Ladhani Metal Corporation supplies these high-performance flanges made from super duplex stainless steel, combining the advantages of both austenitic and ferritic structures to achieve superior mechanical properties and exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. With a pressure rating of PN 40, these flanges can withstand pressures up to 40 bar, ensuring reliable and safe performance in demanding applications such as offshore oil and gas, chemical processing, and marine industries. Types of DIN 2545 Super Duplex Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface, suitable for low-pressure systems where uniform distribution of sealing force is needed. Raised Face Flanges (RF) – These flanges feature a raised area around the bolt holes, providing higher sealing pressure and better performance in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove to accommodate a metal sealing ring, these flanges are ideal for use in high-pressure and high-temperature systems. Grades and Chemical Composition: Super Duplex 2507 (UNS S32750) Chemical Composition: Chromium (Cr): 25% Nickel (Ni): 7% Molybdenum (Mo): 4% Nitrogen (N): 0.27% Iron (Fe): Balance This composition provides a remarkable combination of properties: Corrosion Resistance: Excellent protection against pitting, crevice corrosion, and stress corrosion cracking, even in environments containing chlorides or other aggressive chemicals. High Strength: The high molybdenum and nitrogen content enhance both the strength and corrosion resistance of the material, making it ideal for applications in highly corrosive, high-pressure environments. Ductility and Toughness: Despite its high strength, Super Duplex 2507 maintains good ductility, which is crucial Super Duplex 2507 is a high-alloy material known for its exceptional resistance to chloride stress corrosion cracking, pitting, and crevice corrosion. It is used in the most demanding applications, including offshore and subsea oil and gas, where high pressures and harsh environments are common. The enhanced molybdenum and nitrogen content provide superior mechanical strength and corrosion resistance. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. With PN 40, the flange is rated to handle pressures up to 40 bar, making it suitable for high-pressure applications where reliability and leak-free connections are essential. Applications: DIN 2545 Super Duplex flanges with PN 40 are widely used in industries that require superior performance under extreme conditions. Common applications include: Oil and Gas Industry: Offshore Platforms and Subsea Pipelines: Super duplex flanges are commonly used in offshore oil and gas platforms where exposure to seawater and harsh conditions requires materials with superior resistance to corrosion. Downhole Equipment: These flanges are ideal for equipment used in oil extraction, such as wellhead connections, blowout preventers, and pipeline systems under high pressure. Chemical and Petrochemical Industry: High-Pressure Reactors and Heat Exchangers: Super duplex flanges are essential in systems handling aggressive chemicals, such as acids, alkalis, and chloride-containing compounds, where both high strength and corrosion resistance are critical. Pipelines for Petrochemical Transport: Used in the transportation of petrochemicals and refined products, offering durability against corrosive chemicals and high temperatures. Marine and Offshore Applications: Seawater Cooling Systems: The excellent corrosion resistance of super duplex steel makes these flanges ideal for marine cooling systems, including seawater pumps and piping systems on ships and offshore platforms. Desalination Plants: Super duplex flanges are used in seawater desalination systems, where they help resist the corrosive effects of saltwater. Power Generation Industry: Nuclear and Fossil Fuel Plants: Super duplex flanges are employed in high-pressure steam lines, cooling systems, and heat exchangers where both strength and resistance to corrosion and erosion are necessary. Geothermal Energy Systems: Used in geothermal plants where high-temperature, aggressive fluids may cause corrosion, super duplex flanges ensure long-lasting performance. Conclusion: Ladhani Metal Corporation ensures that each Super Duplex flange meets stringent quality standards and is manufactured to exact specifications, ensuring durability and long-lasting performance in the most challenging environments. #din2545 #din2545flanges #din2545superduplexflanges #flanges

DIN 2545 duplex flanges are designed to provide exceptional strength and corrosion resistance in demanding industrial applications. Ladhani Metal Corporation offers these high-quality flanges made from duplex stainless steel, which combines the best features of both austenitic and ferritic structures. This unique material provides superior resistance to pitting, crevice corrosion, and stress corrosion cracking, making it ideal for use in harsh environments. With a pressure rating of PN 40, these flanges are capable of handling pressures up to 40 bar, ensuring safe and reliable performance in industries such as chemical processing, oil and gas, marine, and offshore platforms. Types of DIN 2545 Duplex Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates a uniform distribution of the sealing force, making them ideal for low-pressure applications or systems where a secure seal is essential. Raised Face Flanges (RF) – Featuring a raised face around the bolt holes, these flanges provide a higher sealing pressure, ensuring a more reliable seal, especially in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are suitable for use in applications requiring high pressure and high temperature resistance. Grades and Chemical Composition: -Duplex 2205 (UNS S32205) Chemical Composition: Cr: 22%, Ni: 5-6%, Mo: 3%, N: 0.14-0.2%, Fe: balance Duplex 2205 is the most common duplex stainless steel grade. It offers excellent corrosion resistance in chloride environments, making it suitable for applications like seawater, chemical, and petrochemical processing. The combination of austenitic and ferritic phases gives Duplex 2205 higher strength compared to austenitic stainless steels, along with improved resistance to pitting and stress corrosion cracking. Super Duplex 2507 (UNS S32750) Chemical Composition: Cr: 25%, Ni: 7%, Mo: 4%, N: 0.27%, Fe: balance Super Duplex 2507 is a higher alloy version of Duplex 2205, offering superior resistance to chloride stress corrosion cracking, pitting, and crevice corrosion. It is used in more aggressive environments, such as offshore oil and gas applications, where the material must withstand high pressures and corrosive conditions. Its higher molybdenum and nitrogen content enhances its performance in severe environments. PN 40 Pressure Rating: The "PN" in DIN 2545 refers to the pressure rating, and PN 40 indicates that the flange is designed to handle pressures up to 40 bar. This ensures that the flange is robust and reliable under high-pressure conditions, maintaining secure and leak-proof connections in critical applications. Applications: Oil and Gas Industry: These flanges are widely used in offshore and onshore pipelines, pressure vessels, and other critical infrastructure in oil and gas exploration, extraction, and transportation. Chemical and Petrochemical Industry: Due to their excellent resistance to corrosion, especially in acidic or chloride-rich environments, they are ideal for use in reactors, heat exchangers, and pipelines handling chemicals and petrochemicals. Marine and Offshore Applications: Duplex flanges are highly resistant to seawater corrosion, making them ideal for use in marine environments, such as shipbuilding, offshore rigs, and seawater cooling systems. Water Treatment Plants: These flanges are used in systems that handle aggressive water environments, ensuring durability and long service life in water and wastewater treatment applications. Power Generation: In power plants, these flanges are used in steam lines, cooling systems, and heat exchangers, where strength, corrosion resistance, and high-pressure capabilities are critical. Pharmaceutical Industry: These flanges are used in systems requiring sanitary conditions and resistance to aggressive cleaning solutions, such as in the transportation of chemicals or in reaction vessels. Key Benefits of Duplex Flanges (PN 40): Exceptional strength and corrosion resistance. Resistance to pitting and crevice corrosion. Excellent performance in harsh environments. Cost-effective compared to higher-grade materials for similar applications. DIN 2545 Duplex Flanges (PN 40) are a reliable choice for high-pressure applications in industries that demand both high performance and durability. #din2545 #din2545flanges #din2545duplexflanges #flanges

DIN 2545 is a German standard for stainless steel flanges, designed for use in piping systems requiring durability, corrosion resistance, and strong mechanical properties. These flanges are commonly used in industries like chemical, petrochemical, food processing, and more. They come in various sizes and configurations for secure and leak-proof connections. The PN 40 rating indicates that these flanges can withstand pressures up to 40 bar (approximately 580 psi) at normal temperatures (typically 20°C or 68°F). Types of DIN 2545 SS Flanges: · Slip-On Flange (SO): A flange that slides over the pipe and is welded inside and outside for a secure connection. · Weld Neck Flange (WN): A flange with a tapered neck that allows for a stronger weld, commonly used in high-pressure applications. · Blind Flange: A flange with no bore used to seal the end of a pipe or vessel. · Threaded Flange: A flange with internal threads that allows it to be screwed onto a pipe without welding. · Socket Weld Flange: Designed for pipes to fit into the socket of the flange, offering good pressure containment in high-temperature applications. · Lap Joint Flange: Used with a stub end and ideal for applications requiring frequent disassembly. Grades and Their Chemical Composition: · Grade 304 (AISI 304): This grade has a chemical composition consisting of 18-20% chromium, 8-10.5% nickel, with a carbon content of up to 0.08%. It also contains small amounts of manganese (2.00-2.50%), silicon (≤ 1.00%), phosphorus (≤ 0.045%), and sulfur (≤ 0.030%), while the rest is iron. It is widely used due to its good corrosion resistance, weldability, and formability. · Grade 316 (AISI 316): The chemical composition of 316 includes 16-18% chromium, 10-14% nickel, and 2-3% molybdenum. It also contains up to 0.08% carbon, 2.00-2.50% manganese, and ≤ 1.00% silicon, with iron making up the balance. The addition of molybdenum provides improved resistance to corrosion, particularly in chloride environments, making it suitable for marine and chemical industries · Grade 321 (AISI 321): This grade has a chemical composition with 17-19% chromium, 9-12% nickel, and a maximum carbon content of 0.08%. It also contains 2.00-2.50% manganese, ≤ 1.00% silicon, and small amounts of phosphorus (≤ 0.045%) and sulfur (≤ 0.030%). The remainder is iron. Grade 321 is stabilized with titanium to prevent sensitization and is highly resistant to intergranular corrosion, making it ideal for high-temperature applications like in the aerospace and chemical industries. Applications: DIN 2545 Stainless Steel Flanges (PN 40) are widely used in various industries due to their superior strength, corrosion resistance, and versatility. These flanges are specifically designed to handle higher pressure ratings (PN 40), making them ideal for demanding applications. Some of the key applications include: -Chemical Processing: Used in the manufacturing of chemicals, pharmaceuticals, and petrochemicals, where high resistance to corrosion is essential. -Oil and Gas Industry: For pipelines, pumps, and valves that transport oil, gas, and other fluids under high pressure. -Water Treatment Plants: Employed in water and wastewater management systems to connect piping and ensure leak-free connections under high pressure. -Food and Beverage Industry: In production systems where hygiene and corrosion resistance are critical, especially in food processing and dairy plants. -Power Generation: For use in power plants in systems such as steam lines and cooling circuits that operate under high-pressure conditions. -Marine and Offshore: Often used in ships, platforms, and offshore structures that are exposed to harsh environmental conditions. -HVAC Systems: In high-pressure heating, ventilation, and air conditioning applications. DIN 2545 Stainless Steel Flanges (PN 40) offer both durability and reliability in these high-pressure applications, ensuring safe and efficient performance in various industries. Conclusion: DIN 2545 SS flanges provide a reliable and robust solution for piping systems across various industries. These flanges are widely used in applications ranging from general industrial use to highly specialized sectors like aerospace, marine, and chemical processing, ensuring safe and efficient operation in demanding environments. The PN 40 rating guarantees they can withstand medium-to-high pressure systems.

DIN 2544 Monel flanges are flanges manufactured according to the DIN 2544 standard, specifically designed for use with Monel alloys. Monel is a high-performance nickel-copper alloy known for its outstanding corrosion resistance, particularly in seawater, acids, and alkaline environments. These flanges are widely used in industries such as marine, chemical processing, petrochemical, and other applications that require resistance to aggressive media and high temperatures. Key Features: Material: Monel alloys (typically Monel 400 and Monel K-500). Pressure Rating (PN 25): These flanges are rated for pressure class PN 25, meaning they can handle pressures up to 25 bar (2500 kPa). Corrosion Resistance: Monel alloys offer excellent resistance to corrosion in harsh environments such as seawater and acidic solutions, making them ideal for marine and chemical applications. Strength: Monel alloys exhibit high strength and toughness, retaining their mechanical properties even in elevated temperature environments. Temperature Resistance: Monel alloys maintain integrity and strength even in high-temperature conditions, making them suitable for demanding applications. Types of DIN 2544 Monel Flanges: Weld Neck Flange (WN): These flanges are ideal for high-pressure applications where a reliable, leak-proof connection is required. The neck is welded to the pipe to create a strong joint. Slip-On Flange (SO): These flanges are easy to install by slipping over the pipe, then welding both inside and outside for a secure connection. Blind Flange (BL): Used to seal the ends of pipes, vessels, or other openings, providing a leak-tight closure. Threaded Flange (TH): These flanges are screwed onto the pipe without welding, making them easier to install and remove when needed. Socket Weld Flange (SW): Designed for smaller pipe sizes, where the pipe is inserted into the socket and welded into place for a strong, secure joint. Grades of Monel: Monel 400: A nickel-copper alloy containing 63% nickel and 29% copper, Monel 400 offers excellent resistance to seawater and other corrosive environments. It is commonly used in marine and chemical processing applications. Monel K-500: This alloy is similar to Monel 400 but with added titanium and aluminum for improved strength and hardness. It is used in high-stress environments such as aerospace and marine applications. Pressure Rating (PN 25): PN 25 means the flange is rated to withstand pressures of up to 25 bar (2500 kPa), making it ideal for moderate to high-pressure applications. Summary: DIN 2544 Monel flanges are corrosion-resistant components made from Monel alloys, ideal for use in industries like marine, chemical processing, and petrochemical. Ladhani Metal Corporation offers a variety of Monel flanges, including weld neck, slip-on, blind, threaded, and socket weld types, rated for pressures up to PN 25. With a strong focus on quality and customer service, Ladhani Metal Corporation provides high-performance solutions for industries worldwide.

DIN 2544 Inconel flanges are flanges manufactured according to the DIN 2544 standard, specifically designed for use with Inconel alloys. Inconel is a family of high-performance nickel-chromium-based superalloys that are known for their exceptional strength and resistance to high temperatures and corrosion. These flanges are primarily used in industries that involve extreme conditions such as aerospace, chemical processing, and high-temperature applications. Ladhani Metal Corporation is a prominent supplier and distributor of high-quality industrial products, including DIN 2544 Inconel flanges. The company specializes in offering a wide range of flanges, fittings, and pipes made from high-performance materials such as Inconel, duplex stainless steel, and other super alloys. Key Features: Material: Inconel alloys (typically Inconel 600, 625, or 718). Pressure Rating (PN 25): These flanges are rated for pressure class PN 25, meaning they can handle pressures up to 25 bar (2500 kPa). High Temperature Resistance: Inconel alloys are well-suited for high-temperature environments, maintaining strength and stability even at temperatures above 1000°C (1832°F). Corrosion Resistance: Inconel offers superior resistance to oxidation, corrosion, and carburization, particularly in high-temperature environments, making them ideal for harsh industrial conditions. Strength: Known for excellent mechanical properties, Inconel alloys retain high tensile and creep-rupture strength even under extreme temperatures. Types of DIN 2544 Inconel Flanges: Weld Neck Flange (WN): Used for high-pressure and high-temperature applications, where a strong, leak-proof joint is essential. Slip-On Flange (SO): Easy to install, these flanges slide over the pipe and are welded both inside and outside. Blind Flange (BL): Used to seal the ends of pipes, vessels, or openings. Threaded Flange (TH): These are screwed onto the pipe without welding, making them easier to remove. Socket Weld Flange (SW): Designed for smaller pipe sizes, where the pipe is inserted into the socket and welded in place. Grades of Inconel: Inconel 600: Contains 72% nickel, 14-17% chromium, and 6-10% iron. It offers excellent resistance to oxidation and carburization at high temperatures, making it ideal for applications in furnace components, heat exchangers, and chemical processing. Inconel 625: A nickel-chromium alloy with added molybdenum and niobium for increased strength and corrosion resistance in marine and chemical environments. It is highly resistant to both oxidation and carburization. Inconel 718: A precipitation-hardenable superalloy with high yield, tensile, and creep-rupture properties at temperatures up to 700°C (1292°F). It is widely used in aerospace, gas turbines, and high-performance engines. Pressure Rating (PN 25): PN 25 means the flange is rated for pressure up to 25 bar (2500 kPa), making it suitable for moderate to high-pressure applications. Summary: DIN 2544 Inconel flanges are robust, high-performance components made from Inconel alloys, designed for use in extremely high-temperature and corrosive environments. They come in various types, These flanges offer excellent resistance to oxidation, corrosion, and high temperatures, making them ideal for demanding applications in aerospace, chemical processing, and high-temperature industries. PN 25 flanges are rated for pressures up to 25 bar.