Product Name: Titanium Plate Standard: ASTM B265 Material: GR1, GR2, GR5, GR7, GR12 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting MOQ:50kgs Product Information Grade 7 titanium sheet (Ti-0.2pd) is a d-type titanium alloy sheet made from industrial pure titanium by adding a small amount of precious metal Pd. The addition of Pd not only significantly improves the corrosion resistance of the alloy in reducing medium, but also improves its corrosion resistance in oxidizing medium. In various chlorine-containing media at high temperature and high concentration, the crevice corrosion resistance of grade 7 titanium alloy sheet is the best. Grade 7 titanium sheet also has the best resistance to crevice corrosion. Other grades of titanium sheets have similar properties, so this alloy sheet is widely used in the chemical industry. Grade 7 Because the addition of Pd increases the cost of titanium, when industrial pure titanium cannot meet the conditions of use, grade 7 titanium sheets are often used. Material: GR1, GR2, GR4, GR5, GR7, GR12 Russia Grade: BT1-100,BT1-0,BT6 etc. Standard: ASTM B265 Thickness: 0.5-100mm The size of standard sheet is 5/10mm × 1000mm × 2000mm. We can also cut it as you require. Surface: Pickling, Polishing, Sand blasting etc. Type: Sheet, plate, foil; Straight & roll State: R/Y/M Chemical Compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical Properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 400 275 20 25

Product Name: Titanium Plate Standard: ASTM B265 Material: GR1, GR2, GR5, GR7, GR12 Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting Product Information Grade 7 titanium sheet (Ti-0.2pd) is a d-type titanium alloy sheet made from industrial pure titanium by adding a small amount of precious metal Pd. The addition of Pd not only significantly improves the corrosion resistance of the alloy in reducing medium, but also improves its corrosion resistance in oxidizing medium. In various chlorine-containing media at high temperature and high concentration, the crevice corrosion resistance of grade 7 titanium alloy sheet is the best. Grade 7 titanium sheet also has the best resistance to crevice corrosion. Other grades of titanium sheets have similar properties, so this alloy sheet is widely used in the chemical industry. Grade 7 Because the addition of Pd increases the cost of titanium, when industrial pure titanium cannot meet the conditions of use, grade 7 titanium sheets are often used. Material: GR1, GR2, GR4, GR5, GR7, GR12 Russia Grade: BT1-100,BT1-0,BT6 etc. Standard: ASTM B265 Thickness: 0.5-100mm The size of standard sheet is 5/10mm × 1000mm × 2000mm. We can also cut it as you require. Surface: Pickling, Polishing, Sand blasting etc. Type: Sheet, plate, foil; Straight & roll State: R/Y/M

DIN 2527 SS P.H. (Precipitation Hardening) Blind Flanges are designed for use in high-performance piping systems that require robust sealing solutions. Made from precipitation-hardening stainless steel alloys, these flanges combine high strength, excellent corrosion resistance, and the ability to withstand elevated temperatures. Manufactured to meet the DIN 2527 standard, these flanges ensure dimensional accuracy, high pressure tolerance, and superior mechanical performance, making them ideal for demanding applications in industries such as chemical processing, aerospace, and power generation. Material Composition of Precipitation Hardening Stainless Steel (SS P.H.): Precipitation-hardening stainless steels are a family of alloys known for their ability to achieve high strength through heat treatment. Grade 17-4 PH: Chromium (Cr): 15.0% - 17.5% Nickel (Ni): 3.0% - 5.0% Copper (Cu): 3.0% - 5.0% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Grade 15-5 PH: Chromium (Cr): 14.0% - 15.5% Nickel (Ni): 3.5% - 5.5% Copper (Cu): 2.5% - 4.5% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Key Features of DIN 2527 SS P.H. Blind Flanges: High Strength: Precipitation-hardened stainless steels, such as 17-4 PH and 15-5 PH, are known for their high tensile strength and hardness. Corrosion Resistance: Stainless steel, especially in the precipitation-hardened grades, offers excellent resistance to corrosion, including resistance to pitting, crevice corrosion, and stress corrosion cracking in both aqueous and high-temperature environments High-Temperature Performance: SS P.H. Blind Flanges can withstand high temperatures, making them suitable for use in applications that involve elevated temperatures (up to 600°C or 1100°F), such as chemical reactors, power plants, and aerospace systems. Dimensional Accuracy & Pressure Ratings: These flanges are manufactured to precise DIN 2527 standards to ensure tight seals and correct fitment in piping systems. They are available in multiple pressure classes such as PN6, PN10, and PN16, which denote the maximum pressure the flange can safely withstand. Design Options: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel, suitable for general applications. Flat-Faced Blind Flange: Features a flat sealing surface for low-pressure applications, ideal for ensuring a tight seal in systems with low pressure. Raised Face Blind Flange: Has a raised area around the center, providing enhanced sealing for higher-pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove for a ring-type joint gasket, used in high-pressure systems such as oil and gas pipelines. Long Weld Neck Blind Flange: Equipped with an extended neck for welding, offering additional strength and support in high-pressure or stressed systems. Nominal Diameter: DIN 2527 SS P.H. Blind Flanges are available in various nominal diameters (DN), ranging from DN10 (1/2 inch) up to DN600 (24 inches) or larger, ensuring compatibility with a wide range of piping systems and applications.

DIN 2527 Titanium Grade 5 Blind Flanges are premium-quality sealing components designed to close off the open ends of pipes, vessels, or equipment in systems where no further connection is needed. Made from Titanium Grade 5 (Ti-6Al-4V), these flanges are known for their superior strength, excellent corrosion resistance, and lightweight properties. Titanium Grade 5 is an alloy composed of titanium, aluminum, and vanadium, making it stronger and more heat-resistant than commercially pure titanium (Grade 2). These flanges adhere to the DIN 2527 standard, ensuring that they meet the precise requirements for dimensional accuracy, pressure tolerance, and mechanical performance. Material Composition of Titanium Grade 5 (Ti-6Al-4V): Titanium Grade 5, also known as Ti-6Al-4V, is composed of the following elements: Titanium (Ti): 90.0% min Aluminum (Al): 6.0% - 7.0% Vanadium (V): 3.5% - 4.5% Iron (Fe): 0.25% max Oxygen (O): 0.20% max Carbon (C): 0.10% max Nitrogen (N): 0.05% max Hydrogen (H): 0.015% max Titanium Grade 5 is one of the most widely used titanium alloys due to its high strength, resistance to corrosion, and ability to withstand elevated temperatures, making it suitable for high-performance applications. Key Features of DIN 2527 Titanium Grade 5 Blind Flanges: Superior Strength: Titanium Grade 5 offers high strength (approximately 130 ksi tensile strength) while maintaining its light weight, making it suitable for demanding applications where both strength and low mass are important, such as in aerospace and military systems. Corrosion Resistance: Titanium Grade 5 exhibits exceptional corrosion resistance, particularly against chlorides, seawater, and acidic environments. It is highly resistant to pitting, crevice corrosion, and stress corrosion cracking. It performs well in the presence of strong acids like sulfuric and hydrochloric acids, making it suitable for chemical processing systems, offshore, and marine applications. Temperature Resistance: Titanium Grade 5 can withstand elevated temperatures, with a continuous operating temperature up to 400°C (752°F) and intermittent exposure to higher temperatures. This makes it suitable for high-temperature applications in aerospace, power generation, and chemical industries. Light Weight: Titanium alloys, including Grade 5, have a very low density, approximately 60% of that of steel, making them an excellent choice for applications where weight reduction is a priority, such as in the aerospace and automotive industries. Dimensional Accuracy & Pressure Ratings: DIN 2527 Titanium Grade 5 Blind Flanges are manufactured to exacting standards to ensure a tight, secure seal in piping systems. Available in various pressure classes such as PN6, PN10, and PN16, allowing compatibility with a range of piping systems depending on the pressure requirements. Design Options: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface for low-pressure systems. Raised Face Blind Flange: Features a raised area around the center for improved sealing in higher pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed for high-pressure applications with a groove for a ring-type joint gasket, commonly used in the oil and gas industries. Long Weld Neck Blind Flange: Includes an extended neck for welding, providing additional strength in high-pressure or stressed systems. Nominal Diameter: DIN 2527 Titanium Grade 5 Blind Flanges are available in a variety of nominal diameters (DN), ranging from DN10 (1/2 inch) up to DN600 (24 inches) or larger, depending on system requirements.

Product Name: Titanium Bar Standard: ASTM B348 Material: GR1, GR2, GR5, GR7, GR12 Shape: Round, Square, Flat, Hex Diameter: 6-350mm Length: Max 6000mm Surface: Bright Grade 7 Titanium Round Bar Product Information Standard: ASTM B348, AMS 4928, ASTM F67,ASTM F136 Grade: GR1, GR2, GR4, GR5, GR7, GR12, GR23, TC11, TC21 Russian Grade: BT1-00,BT1-0,BT1-2, BT9, BT22 Shape: Round, Square, Flat, Hex Diameter: 3-350mm Length: up to 6000mm, random length is also ok and the price is lower Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per your requirements Surface: Polishing, Pickling Condition: Annealed Features: 1. Not any defects free from cracks no pitting. 2. Two ends flatting making sure length tolerance and good looking. Chemical Composition Element Titanium Grade 7 Pd 0.12-0.25 Ti Bal Fe 0.30 max C 0.08 max N 0.05 max H 0.015 max O 0.2 max Mechanical Properties Element Titanium Grade 7 Density 4.51g/cm³ Melting Point 1668 ℃ Tensile Strength(Mpa) 370 Yield Strength(Mpa) 250 Elongation(%) 20 Reduction of area(%) 25

Product name: Titanium alloy bar grade 7 Standard : ASTM B348 Material grade: Gr7 titanium Size: Dia 5--200mm * Max L6000mm Applications :Industrial Supply status: Annealed Unit price:$238.5-$349.2/kg Package: Carton or plywood case. Surface:CNC machined polished ASTM B348 Grade7 Round Bar,Gr7 titanium bar,Titanium UNS R52400 Bars, Grade 7 Titanium Rods, Titanium Grade 7 Cold Finished Bars, Bright titanium bar, Titanium round bar, Titanium Grade7 Hot Rolled Bars Manufacturers,ASTM B348 Titanium Grade 7 Square Bars.

Product name:Grade 12 Titanium plate Unit price:$15.5-$36.9/kg Material: Titanium Grade 12 (Ti-0.3Mo-0.8Ni) Standard: ASTM/ASME B265 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) GR12 is a titanium alloy containing molybdenum and nickel (Ti-0.3Mo-0.8Ni).Grade 12 titanium plate is high quality and weldability. It is a titanium alloy that has always been very durable, even at high temperatures. In addition, Grade 12 titanium plates have excellent corrosion resistance in reducing and oxidizing environments, and their heat resistance is better than that of pure titanium. Grade 12 titanium sheets generally have few scratches and are not easy to scratch. Product name:Grade 12 Titanium plate Material: Titanium Grade 12 (Ti-0.3Mo-0.8Ni) Standard: ASTM/ASME B265 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc Technique : Rolled Status: Annealed(M) MTC: EN10204.3.1 certificate Applications : Petroleum ,chemical industry, Marine, medical Package:Standard export packaging, inside foam film and pearl cotton protection, outside fumigation-free plywood case. Grade 12 Titanium Plate Equivalent Grades: STANDARD WERKSTOFF NO. UNS Titanium Grade 12 3.7105 R53400 Titanium ASTM B265 Gr 12 Plate Chemical Composition: Fe O C H N Mo Ni ≤0.30 ≤0.18 ≤0.08 ≤0.015 ≤0.03 0.2 - 0.4 0.6 - 0.9 Titanium Grade 12 Plate Mechanical Properties: Material Tensile Strength min Yield Strength Elongation in 2" (%) ksi Mpa Max Min ksi Mpa Ksi Mpa Titanium CP Grade12Annealed Sheet 70 483 50 345 - - 18

Product name: Grade 7 titanium tubes Standard:ASTM B338 ASTM B861 ASTM B862 Material:Titanium Gr7 Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Grade 7 Titanium Tubes Product name: Grade 7 titanium tubes Standard:ASTM B338 ASTM B861 ASTM B862 Material:Titanium Gr7 Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Dimension and Tolerance of titanium tube Outside diameter, in.(mm) Diameter tolerance, in.(mm) Permissible variations , wall thinckness, t, % in.(mm) <1 (25.4) ±0.004( ± 0.012) ±10 1-1½(25.4-38.1) ±0.005( ±0.127 ) ±10 1½-2(38.1-50.8) ±0.006( ± 0.152) ±10 2-2½(50.8-63.5) ±0.007( ± 0.178) ±10 2½-3½(63.5-88.9) ±0.010( ± 0.254) ±10 Grade 7 (Ti-0.2Pd) titanium tube Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25 The density of titanium alloy is generally about 4.51g/ cubic centimeter, only 60 of steel, the strength of pure titanium is close to the strength of ordinary steel, some high strength titanium alloy exceeds the strength of many alloy structural steel. Therefore, the specific strength (strength/density) of titanium alloy is much higher than that of other metal structural materials, as shown in Table 7-1. It can produce components with high unit strength, good rigidity and light weight. At present, titanium alloy is used for engine components, skeleton, skin, fasteners and landing gear. High thermal strength The use temperature is several hundred degrees higher than aluminum alloy, can still maintain the required strength at moderate temperature, can work for a long time at 450500 temperature these two titanium alloys still have high specific strength in the range of 150500, and aluminum alloy at 150 than the strength decreased significantly. Titanium alloys operate at temperatures up to 500, while aluminum alloys operate below 200. Good resistance to corrosion The corrosion resistance of titanium alloy is much better than that of stainless steel when working in humid atmosphere and seawater medium. Resistance to pitting corrosion, acid corrosion, stress corrosion is particularly strong; Excellent corrosion resistance to alkali, chloride, chlorine organic articles, nitric acid, sulfuric acid and so on. But titanium has poor corrosion resistance to reducing oxygen and chromite medium. Good low temperature performance Titanium alloy can keep its mechanical properties at low temperature and ultra low temperature. Titanium alloys with good low temperature performance and very low gap elements, such as TA7, can maintain certain plasticity at -253. Therefore, titanium alloy is also an important low temperature structural material.

Product Name: Titanium grade 7 elbows Standard: ASME B16.9 Material: Gr1, Gr2, Gr7, Gr12 Unit Price: $10usd/pc-$200usd/pc Outer Diameter: 1/2"-48" Wall Thickness: Sch5s-Sch160s Technique: Seamless/Welded Functions and features: 1. Elbow is used to install between two sections of pipe or pipe allowing direction change. 2. Save space, reduce weight, with sealing function. 3. Economic reliability. Production methods of titanium elbow: 1.Hot push forming The hot pushing elbow forming process is a process of heating, expanding and bending the blank sleeved on the die under the push of the pushing machine by using a special elbow pushing machine, core die and heating device. 2.Stamping forming Stamping forming elbow is the first forming process used in batch production of seamless elbow. It has been replaced by hot pushing method or other forming processes in the production of common specifications of elbow. However, it is still used in some specifications of elbow due to special requirements for products with small production quantity, too thick or too thin wall thickness. The pipe blank equal to the outer diameter of the elbow is used for the stamping forming of the elbow, and the press is used to press directly in the die. 3.Medium plate welding Use the medium plate to make half of the elbow section with a press, and then weld the two sections together. This process is generally used for elbows above DN700. Grade 7 (Ti-0.2Pd) titanium elbow Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25