'glass industries installed'

Ladhani Metal Corporation offers SS 304 Boiler Tube Shields engineered to protect straight boiler and heat exchanger tubes from erosion, oxidation, and impact damage in aggressive thermal environments. Manufactured from austenitic stainless steel grade SS 304, these shields provide excellent corrosion resistance, good mechanical strength, and thermal stability at high operating temperatures. SS 304 is widely used in applications where exposure to flue gases, steam, and particulate matter demands reliable, long-term protection. The half-round design is precision-formed to match the curvature of straight boiler tubes, ensuring a snug and secure fit. This close contact minimizes tube exposure to abrasive particles, high-velocity gases, and soot blower impact. The shields serve as a durable physical barrier, extending tube life and reducing the frequency of costly maintenance and replacements. Ladhani Metal Corporation manufactures, supplies, and exports SS 304 Boiler Tube Shields in a variety of lengths, diameters, and thicknesses to suit specific application requirements across domestic and international markets. SS 304 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Suitable for thermal power stations, process heaters, WHRBs, HRSGs, and chemical industries operating under corrosive and high-heat environments. Uses • Protection of straight boiler tubes from erosion and oxidation • Installed in radiant and convection zones of boilers • Shields against soot blower damage in utility boilers • Used in HRSG and WHRB systems exposed to flue gases • Ideal for chemical, food, and textile processing boilers Features • Excellent corrosion resistance – Performs in oxidizing and mildly acidic environments • High thermal durability – Maintains strength at elevated temperatures • Long service life – Minimizes wear and reduces maintenance intervals • Easy to install – Can be clamped, tack welded, or banded • Custom-built – Available in varied lengths, thicknesses, and diameters • Export-ready – Manufactured to meet international standards Applications • Power plants – Steam generator tube protection from scale and erosion • Refineries and petrochemical units – For tube shielding in process heaters • Waste heat recovery systems – In cement, steel, and glass industries • Industrial boilers – Where high temperature and flue gas exposure are present Conclusion The SS 304 Boiler Tube Shield from Ladhani Metal Corporation delivers robust and corrosion-resistant protection for straight tubes exposed to harsh thermal and gaseous environments. With high-grade austenitic stainless steel construction, precise fit, and customizable dimensions, these shields are ideal for domestic and global boiler systems. For technical consultation, material selection, or custom orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr20Ni14Si2 U Type Half Round Tube Shield The 1Cr20Ni14Si2 U Type Half Round Tube Shield is manufactured from a high-temperature austenitic stainless steel alloy designed for demanding thermal environments. Composed primarily of chromium and nickel with enhanced silicon content, this alloy provides outstanding resistance to oxidation, scaling, carburization, and thermal fatigue. It is particularly effective in shielding U-bend tube sections within boilers, reformers, and heat recovery systems where prolonged exposure to high heat and reactive gases can degrade performance. The U-type configuration ensures full coverage of the inner and outer arcs of curved tubes, delivering comprehensive protection against mechanical and thermal damage. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bends from high-temperature flue gas erosion, slag deposits, and oxidizing environments. • Inner U Type Half Round Tube Shield – Shields the inner bend arc from thermal stress cracking, scale formation, and turbulence-induced wear. Ladhani Metal Corporation provides 1Cr20Ni14Si2 U Type Half Round Tube Shields for industries requiring reliable, long-term protection in aggressive high-temperature service conditions. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous and cyclic high-temperature systems where resistance to oxidation, thermal fatigue, and carburization is critical. Uses • Protection of U-bend tubes in superheaters and reheaters in power generation systems • Shielding of return bends in waste heat recovery boilers and HRSGs operating under high flue gas flow • Coverage for curved tube sections in reformers, cracking furnaces, and thermal oxidizers • Safeguarding tube bends in heat exchangers, condensers, and process gas heating systems • Applicable in chemical, metallurgical, and energy industries where extreme thermal cycling and gas exposure occur Features • Excellent oxidation resistance – Chromium and silicon-rich composition provides strong protection against scaling in high-temperature, oxidizing atmospheres. • Superior thermal fatigue performance – Maintains mechanical strength and dimensional stability under rapid temperature fluctuations. • Dual-arc shielding – Available in inner and outer U-type configurations for total protection of return bends in heat exchanger systems. • Precision engineered – Manufactured to match tube diameter and bend radius, ensuring tight, secure installation without vibration or misalignment. • Easy to install – Can be quickly mounted using banding, clamps, or tack welds without the need to disassemble tube bundles. • Long service life – Designed for demanding environments, reducing maintenance frequency and enhancing overall system efficiency. Applications • thermal power plants – Installed in U-bends of superheaters and reheaters to prevent heat-induced scaling, erosion, and fatigue cracking. Improves reliability and heat transfer efficiency. • petrochemical and refinery units – Used in process heaters, reformers, and thermal units where high-temperature gas exposure is constant. Provides stable, long-term protection. • waste heat recovery units – Shields U-shaped tubes in WHRBs and HRSGs from slag deposits, oxidizing gases, and temperature cycling stress. • chemical industries – Ideal for ammonia synthesis, methanol production, and gas reforming systems exposed to thermal shock and oxidizing media. • metal and glass manufacturing – Protects curved tubes in furnaces and preheaters exposed to abrasive and high-heat environments. Conclusion The 1Cr20Ni14Si2 U Type Half Round Tube Shield by Ladhani Metal Corporation is a high-performance solution for protecting U-bend tube sections in the most demanding thermal and chemical environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this shield is ideal for use in power plants, refineries, chemical processing units, and high-temperature industrial systems. Designed for precision fit and easy installation, it provides dependable, long-lasting protection that reduces maintenance and extends equipment service life. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr25Ni20Si2 U Type Half Round Tube Shield The 1Cr25Ni20Si2 U Type Half Round Tube Shield is specifically designed for use in extreme high-temperature environments where oxidation, carburization, and thermal fatigue are major concerns. Fabricated from 1Cr25Ni20Si2, a high-chromium, high-nickel austenitic heat-resistant alloy with added silicon, this shield provides superior resistance to scaling, thermal deformation, and chemical attack. It is ideal for protecting U-bend sections in superheaters, reformers, and waste heat recovery systems operating under aggressive thermal and gas flow conditions. • Outer U Type Half Round Tube Shield – Defends the outer curvature of U-bends from flame impingement, slag buildup, and high-temperature oxidation. • Inner U Type Half Round Tube Shield – Shields the inner arc from turbulence-driven erosion, localized thermal stress, and scaling in cyclic heating zones. Ladhani Metal Corporation offers 1Cr25Ni20Si2 U Type Half Round Tube Shields for industries that demand long-term durability, high-temperature performance, and chemical resistance in critical tube bend applications. Chemical Composition of 1Cr25Ni20Si2 – High-Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments such as petrochemical reformers, thermal reactors, and industrial boilers. Uses • Protection of U-bend tubes in superheaters and reheaters in thermal and captive power plants • Shielding tube bends in waste heat recovery boilers (WHRBs) and HRSGs subjected to slag and heat erosion • Guarding return bends in petrochemical steam reformers and cracking furnaces • Coverage for curved tubes in chemical reactors exposed to oxidizing and acidic gases • Ideal for industrial plants where prolonged exposure to thermal cycling and aggressive gas media is common Features • High-temperature strength – Maintains mechanical integrity and structural stability in service temperatures exceeding 1000°C. • Superior oxidation resistance – High chromium and silicon content offers excellent protection against scaling in air and oxidizing environments. • Carburization resistance – Resists carbon infiltration in environments rich in hydrocarbons and flue gases. • Full U-bend shielding – Available in both inner and outer U-type configurations for complete coverage of critical curved tube areas. • Custom fabrication – Precisely manufactured to match tube radius, bend angle, and diameter for a secure, vibration-resistant fit. • Easy to install – Mountable using clamps, bands, or tack welds without the need for system disassembly or extended shutdown. Applications • thermal power stations – Used on U-bend tubes in high-temperature sections of superheaters and reheaters to prevent scaling and heat-related fatigue. Increases equipment life and operational efficiency. • petrochemical refineries – Installed in steam reformers, cracking furnaces, and heaters exposed to oxidizing and carburizing gases. Delivers consistent protection under continuous heat stress. • waste heat recovery units – Shields return bends in WHRBs and HRSGs from slag abrasion and flue gas corrosion. Enhances resistance to thermal cycling. • chemical and metallurgical plants – Ideal for reactors, synthesis gas units, and process heat exchangers operating under severe thermal and chemical loads. • cement and glass industries – Applied in high-temperature gas flow lines and heater tubes where scale resistance and mechanical protection are essential. Conclusion The 1Cr25Ni20Si2 U Type Half Round Tube Shield by Ladhani Metal Corporation is a high-performance shielding solution engineered for extreme temperature and chemically aggressive environments. With its superior resistance to oxidation, carburization, and thermal fatigue, this alloy-based shield is ideal for power generation, petrochemical, and heavy industrial applications. Custom-fit for precision and ease of use, it offers long service life, reliability, and protection for the most demanding tube bend installations. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 420 U Type Half Round Tube Shield The SS 420 U Type Half Round Tube Shield is manufactured from hardenable martensitic stainless steel, providing robust mechanical strength, surface hardness, and oxidation resistance in high-temperature service environments. Designed specifically for U-bend sections in heat exchangers, boilers, and superheaters, this shield offers dependable protection against scaling, thermal fatigue, and particulate erosion. The U-type configuration enables targeted shielding of both the inner and outer arcs of tube bends—critical areas where temperature gradients and gas velocity are highest. • Outer U Type Half Round Tube Shield – Protects the outer curve of U-bends from slag accumulation, flame impingement, and surface wear caused by high-velocity gas flow. • Inner U Type Half Round Tube Shield – Shields the inner arc against turbulence-induced erosion, scaling, and corrosion under thermal stress conditions. Ladhani Metal Corporation supplies SS 420 U Type Half Round Tube Shields tailored to meet the demands of thermal power, petrochemical, and process industries operating in elevated temperature ranges with limited corrosive exposure. Chemical Composition of SS 420 – Hardenable Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for systems requiring wear resistance, oxidation stability, and mechanical strength in dry, heat-intensive environments. Uses • Protection of U-bend tubes in thermal power plant superheaters and reheaters • Coverage for curved tube sections in WHRBs and HRSGs exposed to abrasive gas flow • Shielding tube bends in chemical reactors and reformers where thermal shock and particulate wear are common • Erosion prevention in return bends of condensers, evaporators, and economizers • Suitable for heat exchanger systems with low moisture and minimal chemical corrosion Features • Excellent surface hardness – SS 420 can be heat-treated for increased hardness and wear resistance, making it suitable for erosive and abrasive service. • Good oxidation resistance – Performs effectively in dry air at elevated temperatures, helping prevent surface scaling and material degradation. • Full bend protection – Offered in both inner and outer U-type forms to ensure total shielding of critical tube bend areas. • Tight and secure fit – Engineered to match tube radius and diameter, ensuring vibration-free performance and minimal exposure. • Simple installation – Can be easily mounted using banding, clamping, or light tack welding without requiring full system shutdown. • Cost-effective solution – Provides a balance of performance and affordability for moderately aggressive service conditions. Applications • thermal and captive power plants – Used on U-bends in reheaters and superheaters to combat flue gas erosion and temperature cycling. Ensures better tube life and heat retention. • refinery and process industries – Suitable for return bends in units with dry, high-temperature gas flow and minimal moisture-induced corrosion. • waste heat recovery systems – Shields U-shaped tubes in WHRBs from slag, particulate impact, and scale buildup. • cement and glass industries – Installed on high-temperature tubes exposed to solid-laden gas streams for wear resistance and surface stability. • chemical plants – Applied in select heat exchanger areas where scaling and erosion are more critical than chemical corrosion. Conclusion The SS 420 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a rugged and efficient solution for protecting U-bend tubes exposed to heat, slag, and abrasive gas flow. With its ability to resist scaling, erosion, and surface fatigue, SS 420 is ideal for industries operating in dry, high-temperature environments. Precision fit, dual-arc protection, and easy installation make these shields a valuable addition to any boiler or heat exchanger system. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",

LADHANI METAL CORPORATION Duplex 31803 Thredolet, Duplex 31803 Thredolet also are one of the highly demanded and widely used products of our company which are one of the most required necessities for several chemical, petroleum and power generation industries. These Duplex 31803 Thredolets are manufactured in a very excellent finishing shape and size to fit absolutely with its purposes and can conveniently be installed. These Duplex 31803 threadolets are made up of very top quality steel materials and hence are corrosion resistant as well as long lasting. We are supplying, wholesaling and trading for these threadolets in the market at very economical range of prices. Features: Supreme material quality Tough and tensile Excellent finishing Easy installation Wide range of utility Cost efficient Variations: 3000# , 6000#, 9000# But-weld : SCH10S - SCH40S - SCH80S - SCH160 - SCHXXS Standards: ASTM B564 - ASME SB564 - 'Standard Specification for Nickel Alloy Forgings' ASME B16.11 - 'Forged Fittings Socket - Welding and Threaded' MSS SP-97 - 'Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends' Size : 1/8" NB to 4" NB. (Socket weld & Threaded) Class : 150, 3000, 6000, 9000 Dimensions: Outlet : 1/2" - 8" Run pipe : 1/2" - 60",