'general isolation'

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2627 stainless steel flanges PN 400 are precision-engineered blind flanges manufactured according to the DIN 2627 standard. Designed to withstand ultra-high-pressure conditions up to 400 bar (5800 psi), these flanges are used to terminate or isolate piping systems safely and effectively. Fabricated from high-grade stainless steels, including 304, 316, and 321, these blind flanges provide superior mechanical strength, corrosion resistance, and long service life in aggressive industrial environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of stainless steel flanges. Our DIN 2627 PN 400 blind flanges are widely trusted in sectors such as oil and gas, chemical processing, marine, energy, and high-pressure utility systems for their durability, quality, and performance under extreme conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure pipelines and critical systems where absolute sealing and structural integrity are required. Flange Type: • Blind Flanges Solid, non-bored flanges used to block pipeline ends or vessel nozzles. These flanges are essential for system isolation during maintenance, testing, or future expansions. • Flat Face (FF) Flanges Flat face flanges are designed to mate with flat gaskets and flat-faced components. They provide even gasket compression and are ideal when used with cast iron or brittle materials to avoid flange distortion. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent general corrosion resistance. Commonly used in food processing, water systems, and chemical equipment. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Enhanced resistance to chlorides and acidic environments. Ideal for marine, pharmaceutical, and chemical processing. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium, providing excellent resistance to intergranular corrosion after welding and high-temperature exposure. Commonly used in thermal processing, aerospace, and exhaust systems. Applications of DIN 2627 Stainless Steel Flanges PN 400: • Oil and Gas Industry Used in upstream and downstream systems, where high pressure and harsh chemicals are common. • Chemical and Petrochemical Plants Ideal for isolating high-pressure lines carrying corrosive or reactive chemicals. • Marine and Offshore Engineering Suitable for saltwater-exposed piping, ballast systems, and underwater applications requiring corrosion resistance. • Power Generation Applied in steam, nuclear, and thermal plants for sealing pressurized piping and vessel systems. • Aerospace and High-Temperature Systems 321-grade blind flanges are used in systems exposed to elevated temperatures and thermal cycling. • Water Treatment and Desalination Withstands chloride-induced corrosion in high-pressure brine and filtration lines. Key Features: • Manufactured to DIN 2627 specifications • PN 400 pressure rating for extreme pressure performance • Blind flange design ideal for system isolation and termination • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face type for even gasket compression and sealing integrity • Superior corrosion resistance and mechanical strength • Suitable for aggressive chemical, marine, and high-temperature environments • Custom sizes, surface finishes, and pressure classes available upon request Conclusion: DIN 2627 Stainless Steel Flanges PN 400 by Ladhani Metal Corporation are designed for maximum performance in high-pressure, corrosive, and high-temperature environments. With material options including 304, 316, and titanium-stabilized 321 stainless steel, these blind flanges offer flexibility, reliability, and long-term service life across critical industries. Contact Ladhani Metal Corporation today for technical assistance, specifications, or custom flange solutions.

DIN 2544 is a German standard for flanges used in piping systems, detailing dimensions, design, and testing methods. Titanium flanges conforming to this standard are designed for use in high-performance environments that demand excellent strength, corrosion resistance, and low weight. Titanium is known for its excellent corrosion resistance, particularly in environments like seawater, chemical processing, and heat exchangers. DIN 2544 titanium flanges are specifically built to withstand aggressive conditions, including high temperatures and corrosive environments, while offering a lightweight alternative to other materials like stainless steel. Key Features of DIN 2544 Titanium Flanges: Material: Titanium flanges are made from titanium alloys, which are highly resistant to corrosion, oxidation, and erosion. Titanium is also known for its strength-to-weight ratio, being strong yet much lighter than many other metals, including stainless steel. Corrosion Resistance: Titanium flanges are ideal for systems exposed to harsh environments, such as saltwater, acids, and chlorides. They are widely used in marine, chemical, and offshore oil and gas applications. Temperature Resistance: Titanium flanges can operate in high-temperature environments, often up to 600°C (1,112°F) without degrading, depending on the specific titanium alloy used. Pressure Rating (PN 25): These flanges are typically rated for PN 25, meaning they can withstand pressures of up to 25 bar (approximately 362 psi) in a variety of applications. Types of DIN 2544 Titanium Flanges: Weld Neck Flanges: These flanges have a long neck that is welded to the pipe. They are ideal for high-pressure systems and applications requiring a strong, reliable connection. Slip-On Flanges: These flanges slide over the pipe and are then welded in place. They are generally used in systems where welding is easier, and the pressures are lower than those of weld neck flanges. Blind Flanges: Used to seal the ends of piping systems, these flanges have no hole in the center. They are often used for isolation and maintenance purposes. Threaded Flanges: These flanges have internal threads that match threaded pipes. They are convenient when welding is not practical or possible. Socket Weld Flanges: These flanges feature a socket where the pipe is inserted and welded into place. These are often used in smaller-diameter piping systems. Titanium Grades for Flanges: Grade 2 Titanium (Commercially Pure Titanium): Properties: Most commonly used grade, offering excellent corrosion resistance and formability. It has moderate strength and is used in a variety of industries like aerospace, chemical processing, and marine applications. Advantages: Excellent corrosion resistance in both seawater and chemical environments. Grade 5 Titanium (Ti-6Al-4V): Properties: An alloy with 6% aluminum and 4% vanadium, offering higher strength than grade 2 titanium, while still maintaining good corrosion resistance. Common in high-stress, high-temperature environments. Advantages: Used in aerospace, medical devices, and high-performance applications due to its superior strength and durability. Pressure Rating (PN 25): PN 25 indicates that the titanium flanges are rated to handle pressures of up to 25 bar (approximately 362 psi). This pressure class is suitable for medium to high-pressure applications, ensuring the flange can endure significant stress in various piping systems. #din2544 #din2544flanges #din2544titaniumflanges

DIN 2527 blind flanges are sealing components used in piping systems to close the ends of pipes, valves, or pressure vessels where no further connection is required. These flanges are designed to prevent the flow of fluids or gases, isolate sections of the piping system for maintenance, or facilitate pressure testing of the system. The DIN 2527 standard ensures these flanges meet specific dimensional and mechanical properties for reliable performance in various industrial applications. material type : Titanium: Titanium flanges, including Grade 2 and Grade 5, are known for their exceptional resistance to corrosion, particularly in aggressive environments like seawater and chemicals. These lightweight and strong materials are commonly used in aerospace, marine, and chemical industries. Stainless Steel (SS): Stainless steel, including grades like 304 and 316, provides excellent corrosion resistance, particularly in harsh environments. It is used in industries like chemical processing and marine applications, where resistance to corrosion and oxidation is essential. Carbon Steel (C.S.): Carbon steel is a popular choice for DIN 2527 blind flanges due to its strength, weldability, and cost-effectiveness. It is ideal for general-purpose applications in systems with moderate temperature and pressure conditions, using grades like St 37 and A105. Mild Steel (MS): Mild steel is a low-carbon steel that offers good formability and strength, making it suitable for less demanding applications. It is commonly used in systems where high pressure or corrosion resistance is not a critical concern. Alloy Steel: Alloy steel flanges, such as A182 F11 and A182 F22, are designed for high-temperature and high-pressure applications. They offer greater strength, thermal expansion resistance, and durability, making them ideal for power generation and petrochemical industries. Inconel: Inconel flanges, including Inconel 600 and 625, are ideal for extreme high-temperature and aggressive environments. These alloys provide superior strength and exceptional resistance to oxidation and corrosion, making them suitable for high-performance applications. SS Duplex Steel: Duplex steel, such as grade 2205, combines the characteristics of both austenitic and ferritic steels, offering high strength and superior resistance to corrosion. It is ideal for use in chemical and marine environments where stress corrosion cracking resistance is crucial. SS Super Duplex Steel: Super duplex steel, such as 2507, provides a combination of high strength and excellent corrosion resistance, especially in harsh environments. It is highly resistant to pitting and stress corrosion cracking, making it ideal for demanding applications in the oil, gas, and marine industries. Key Features of DIN 2527 Blind Flanges: Material Variety: DIN 2527 blind flanges are available in different materials, including carbon steel, mild steel, stainless steel, alloy steel, and special alloys like Inconel or Duplex steel, offering a wide range of options to meet the needs of different environments, temperatures, and pressures. Pressure and Temperature Ratings: These flanges are available in different pressure ratings such as PN6, PN10, PN16, PN25, and PN40, ensuring they can withstand the required pressures for various industrial applications. Dimensional Standards: The DIN 2527 standard ensures precise dimensional accuracy, allowing for reliable sealing and easy installation in piping systems. These flanges are available in various nominal diameters, typically ranging from DN10 (1/2 inch) to DN600 (24 inches) or more, depending on the system requirements.

DIN 2527 Carbon Steel (C.S.) Blind Flanges are designed to seal the ends of pipes or vessels in industrial piping systems where no further connection is required. These blind flanges are made from carbon steel, which is known for its strength, durability, and cost-effectiveness. The DIN 2527 standard ensures that these flanges meet precise dimensional and mechanical requirements for reliability under various industrial conditions. Material Composition of Carbon Steel (C.S.) Blind Flanges: The material used in DIN 2527 carbon steel blind flanges typically includes carbon steel grades like St 37, St 52, or A105, which are commonly used for pressure-containing parts in piping systems. The general composition of carbon steel includes: Carbon (C): 0.05% to 0.25% – Provides strength and hardness. Manganese (Mn): 0.30% to 0.90% – Enhances toughness and strength. Silicon (Si): 0.10% to 0.60% – Adds strength and hardness. Phosphorus (P): Up to 0.04% – Ensures better toughness and workability. Sulfur (S): Up to 0.05% – Keeps the material ductile and machinable. Iron (Fe): The remainder of the material – Makes up the base composition. These carbon steel grades provide excellent mechanical properties, such as strength, ductility, and weldability, making them suitable for a wide range of applications in moderate temperature and pressure environments. Key Features of DIN 2527 Carbon Steel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: Carbon steel can withstand temperatures up to 400°C (752°F) without significant degradation. It is ideal for moderate temperature applications. Pressure Tolerance: DIN 2527 carbon steel blind flanges come with pressure ratings such as PN6, PN10, PN16, PN25, and higher, ensuring they can safely handle pressure in piping systems. Corrosion Resistance: Carbon steel is not highly resistant to corrosion, especially in moisture, chlorides, or acidic environments. To enhance the corrosion resistance, these flanges can be galvanized or coated (with zinc or paint), which helps in increasing their durability in mildly corrosive environments. Strength and Durability: Carbon steel offers high strength and good toughness under moderate stress and pressure conditions. It is stronger than mild steel, providing a reliable seal for general industrial use. Dimensional Accuracy and Pressure Class: The DIN 2527 standard ensures precise dimensional accuracy, enabling easy and reliable installation. Carbon steel blind flanges come in different pressure ratings like PN6, PN10, PN16, and PN25, providing flexibility based on the system's pressure requirements. Design and Types of DIN 2527 Carbon Steel Blind Flanges: Standard Blind Flange (Type A): A solid circular flange used for general isolation of pipeline sections where no further connection is needed. Flat-Faced Blind Flange: This flange features a flat sealing surface, making it suitable for low-pressure systems or applications where a tight seal is not required. Raised Face Blind Flange: Has a raised surface for a better seal in medium-to-high-pressure systems, where the flange is bolted to a matching raised face of another flange. Ring-Type Joint (RTJ) Blind Flange: Used in high-pressure systems, this flange has a groove that holds an RTJ gasket, offering a superior seal under high-pressure conditions. Long Weld Neck Blind Flange: Features an extended neck for welding to the pipe, providing additional strength and making it suitable for high-pressure or high-stress applications. Nominal Diameter: Available in a wide range of nominal diameters (e.g., DN10, DN50, DN150, DN600), ensuring compatibility with different pipe sizes and system requirements.

DIN 2527 is a German standard that defines the dimensions, design, and tolerances for flanges, including blind flanges. Blind flanges made of stainless steel 316 are commonly used in piping systems to seal the ends of pipes, providing a secure and reliable closure. Here's a detailed description of DIN 2527 Stainless Steel 316 Blind Flanges: Material: Stainless Steel 316: This is a higher grade of stainless steel compared to 304, offering superior corrosion resistance. Stainless steel 316 contains molybdenum, which enhances its resistance to corrosion, particularly against chlorides, making it ideal for environments with higher risks of corrosion, such as seawater, chemicals, and marine environments. Corrosion Resistance: Stainless steel 316 has excellent resistance to a wide range of chemicals and industrial environments. Temperature Resistance: It can withstand higher temperatures compared to 304 stainless steel, making it suitable for high-temperature applications. Strength: Stainless steel 316 has slightly higher tensile strength compared to 304, offering added durability and structural integrity. Design and Dimensions: Shape: Blind flanges are flat, round plates with no center hole, used to seal the end of a pipe or pressure vessel. Bolt Holes: These flanges have bolt holes to align with bolts for connecting to other flanged components. The number and size of bolt holes depend on the diameter of the flange and the pressure class. Thickness: The thickness of DIN 2527 blind flanges varies depending on the pressure class (PN 6, PN 10, PN 16, PN 25, etc.). Thicker flanges can handle higher pressure ratings and provide a more secure seal. Pressure Rating: Similar to other flanges, the pressure rating for DIN 2527 blind flanges is important for determining the maximum pressure they can withstand without failure. Stainless steel 316 flanges can be designed to withstand high-pressure applications. Applications: Sealing: Blind flanges made of stainless steel 316 are used to seal the end of a pipeline or vessel to prevent fluid leakage, effectively creating a closed system. System Isolation: These flanges are used to isolate sections of a piping system for maintenance or modification, allowing for safe shutoff of pressure or fluid flow. High-Corrosion Environments: Due to the superior corrosion resistance of stainless steel 316, these blind flanges are used in industries where exposure to corrosive materials, saltwater, or harsh chemicals is a concern (e.g., chemical processing, marine, pharmaceutical, food processing). Types of Blind Flanges in DIN 2527: Raised Face (RF): The face of the flange is slightly raised to improve the sealing capability when paired with a gasket. Flat Face (FF): The face of the flange is level with the surface, often used with softer gaskets for a secure seal. Ring Type Joint (RTJ): For applications requiring high pressure, a ring-type joint may be used, which features a groove in the flange for a metallic gasket.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X04Cr18Ni10Nb as per IS 6911 specifications. X04Cr18Ni10Nb is a niobium-stabilized austenitic stainless steel designed to provide superior resistance to intergranular corrosion after welding and exposure to high temperatures. The addition of niobium stabilizes the steel against carbide precipitation, ensuring long-term durability in aggressive environments. Chemical Composition of X04Cr18Ni10Nb (as per IS 6911) • Carbon (C): 0.04% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 12.0% • Niobium (Nb): ≥ 10 × C% and ≤ 1.0% Functions and Characteristics • Niobium stabilization prevents sensitization and intergranular corrosion • Excellent resistance to oxidation and scaling in high-temperature environments • Good mechanical strength and toughness across a wide temperature range • Superior weldability without risk of post-weld carbide precipitation • High corrosion resistance in oxidizing and reducing atmospheres • Non-magnetic in annealed condition, slightly magnetic after cold working Applications • Power Generation – Superheaters, heat exchangers, and boiler tubes • Oil and Gas – Welded pipelines, offshore platforms, and refinery equipment • Petrochemical Industry – Process units, reformers, and cracking systems • Fertilizer Plants – Storage tanks, pressure vessels, and corrosive pipelines • Chemical Industry – Process equipment, evaporators, and reactors • Marine Engineering – Pumps, exhaust systems, and seawater-handling equipment • Automotive Industry – Exhaust manifolds, catalytic converter parts, and clamps • Food Processing – Hygienic tanks, processing equipment, and storage systems • Construction – Structural frameworks, roofing, and cladding materials • General Engineering – Valves, fasteners, and machinery operating at high temperatures Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X04Cr18Ni10Nb, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti and other specified grades. Conclusion IS 6911 SS X04Cr18Ni10Nb sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are ideal for high-temperature and welded applications requiring superior resistance to intergranular corrosion and mechanical stability. With multiple IS 6911 grades available, we provide stainless steel solutions tailored to meet both domestic and international industry standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X04Cr18Ni10Ti as per IS 6911 specifications. X04Cr18Ni10Ti is a titanium-stabilized austenitic stainless steel grade designed to provide excellent resistance to intergranular corrosion after welding. The addition of titanium ensures stability against carbide precipitation, making it particularly suitable for high-temperature service and welded components. Chemical Composition of X04Cr18Ni10Ti (as per IS 6911) • Carbon (C): 0.04% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 12.0% • Titanium (Ti): ≥ 5 × C% and ≤ 0.70% Functions and Characteristics • Titanium stabilization prevents intergranular corrosion after welding or heat exposure • Excellent resistance to oxidation and scaling at elevated temperatures • Maintains structural stability and toughness under cyclic thermal conditions • Good corrosion resistance in a wide range of oxidizing environments • High formability and weldability for complex fabrication work • Non-magnetic in annealed condition, slightly magnetic when cold worked Applications • Power Generation – Boiler tubes, heat exchangers, and turbine components • Oil and Gas – Welded pipelines, subsea structures, and refinery equipment • Petrochemical Industry – Process reactors, cracking units, and reformers • Fertilizer Plants – Corrosion-resistant pipelines and vessels for chemical handling • Chemical Industry – Storage tanks, heat exchangers, and pressure equipment • Marine Engineering – Pumps, exhaust systems, and offshore structures • Automotive Industry – Exhaust systems, manifolds, and high-temperature fasteners • Food Processing – Sanitary equipment, kitchenware, and hygienic tanks • Construction – Roofing, cladding, and structural frameworks • General Engineering – Valves, shafts, and machinery requiring heat and corrosion resistance Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X04Cr18Ni10Ti, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X04Cr18Ni10Ti sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are ideal for critical applications requiring resistance to sensitization, high-temperature strength, and corrosion resistance. With availability in multiple IS 6911 grades, we deliver stainless steel solutions that meet both domestic and international quality standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X04Cr17Ni12Mo2Ti as per IS 6911 specifications. X04Cr17Ni12Mo2Ti is a titanium-stabilized austenitic stainless steel with molybdenum addition, designed to provide enhanced resistance to intergranular corrosion, pitting, and crevice corrosion. The presence of titanium ensures stability against carbide precipitation during welding, making this grade suitable for applications involving elevated temperatures and aggressive environments. Chemical Composition of X04Cr17Ni12Mo2Ti (as per IS 6911) • Carbon (C): 0.04% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 16.5% – 18.5% • Nickel (Ni): 10.5% – 13.5% • Molybdenum (Mo): 2.0% – 3.0% • Titanium (Ti): ≥ 5 × C% and ≤ 0.70% Functions and Characteristics • Titanium stabilization prevents sensitization and intergranular corrosion after welding • Molybdenum addition improves resistance to pitting and crevice corrosion in chloride environments • Excellent corrosion resistance in oxidizing and reducing chemical atmospheres • Good toughness and ductility across a wide temperature range • Excellent weldability and formability for complex fabricated components • Non-magnetic in annealed condition, may become slightly magnetic when cold worked Applications • Power Generation – Heat exchangers, superheaters, and boiler tubes • Oil and Gas – Offshore structures, pipelines, and subsea equipment • Petrochemical Industry – Chemical reactors, reformers, and process piping • Fertilizer Plants – Corrosion-resistant tanks, vessels, and piping systems • Chemical Industry – Storage tanks, evaporators, and process vessels • Marine Engineering – Pumps, seawater systems, and shipbuilding components • Automotive Industry – Exhaust components, catalytic converter housings, and clamps • Food Processing – Hygienic tanks, processing equipment, and kitchen systems • Construction – Facades, roofing, and structural components exposed to corrosive atmospheres • General Engineering – Shafts, fasteners, and components requiring resistance to stress corrosion Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X04Cr17Ni12Mo2Ti, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X04Cr17Ni12Mo2Ti sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are well-suited for critical applications requiring excellent corrosion resistance, stability against sensitization, and durability in aggressive environments. With multiple IS 6911 grades available, we provide stainless steel solutions that meet stringent domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation