Half Round Tube Shield Ladhani Metal Corporation manufactures SS 304L Half Round Straight Tube Shields designed to protect straight sections of boiler and heat exchanger tubes from erosion, thermal fatigue, and corrosion caused by high-temperature gases and particulate matter. These shields are shaped to conform tightly to the outer tube surface, providing a protective barrier in high-wear zones. The SS 304L material offers excellent weldability and enhanced resistance to intergranular corrosion, making it ideal for shielding tubes in critical thermal environments. SS 304L Half Round Straight Tube Shield The SS 304L Half Round Straight Tube Shield is made from low-carbon austenitic stainless steel (304L), which minimizes carbide precipitation during welding and resists intergranular attack. This makes it especially useful for applications where welding is required during installation. The shield is installed over straight tube sections in boilers, superheaters, economizers, and steam processing equipment to extend tube life and reduce maintenance needs. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 304L Half Round Straight Tube Shields, offering reliable tube protection solutions for industrial heating and energy systems. Material Grade SS 304L – Low-carbon variant of austenitic stainless steel with enhanced corrosion resistance and weldability. Chemical Composition of SS 304L • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for systems involving welding, elevated temperatures, and corrosive steam or gas exposure. Uses • Shielding straight tubes in boilers and superheaters • Protection of economizer tubes and reheaters • Used in heat recovery steam generators (HRSGs) • Applied in steam reformers and chemical processing units • Effective in pulp and paper recovery boilers and refinery heaters Features • Intergranular corrosion resistance – Low carbon content prevents sensitization and weld decay • High-temperature strength – Maintains integrity under prolonged heat and gas exposure • Extended tube life – Minimizes erosion, slag buildup, and surface damage • Custom sizing – Available in various diameters, thicknesses, and lengths to match tube dimensions • Simple installation – Mounts securely using clamps, welding, or metal banding • Reduced maintenance – Lowers the need for frequent inspection and tube replacement Applications • power generation – Shields straight tube segments in LTSH and superheater zones from flue gas erosion • petrochemical plants – Protects tubes in high-humidity, chloride, and acidic processing environments • industrial boilers – Enhances tube longevity in zones prone to fly ash and slag contact • waste heat recovery systems – Extends operational life under thermal cycling and gas turbulence • marine boilers – Ideal for use in steam systems aboard ships exposed to saline and humid conditions Conclusion The SS 304L Half Round Straight Tube Shield by Ladhani Metal Corporation provides a robust and corrosion-resistant solution for protecting straight tube sections in thermal processing units. With its low carbon content, superior weldability, and durable performance in high-temperature environments, it is an optimal choice for industries focused on efficiency, reliability, and long service life. For custom fabrication, project-specific designs, or technical support, please contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures precision-engineered Half Round Tube Shields to protect boiler and heat exchanger tubes from corrosion, erosion, and surface degradation. Designed for durability in aggressive environments, these shields are especially suited for thermal equipment where tubes are subjected to high flow velocities, abrasive particles, and flue gas turbulence. Their half-round shape allows easy installation while offering long-term protection and reduced maintenance. 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube The 1Cr20Ni14Si2 Half Round Tube Shield is manufactured from a high-temperature-resistant chromium-nickel-silicon alloy. With approximately 20% chromium, 14% nickel, and added silicon, this material offers outstanding oxidation resistance, excellent strength at elevated temperatures, and superior resistance to high-temperature corrosion. It is an ideal choice for shielding Low Temperature Superheater (LTSH) tubes, which are frequently exposed to flue gases carrying ash and particulate matter that can cause rapid wear. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Half Round Tube Shields, providing high-performance shielding solutions for challenging industrial heat transfer applications. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Alloy Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.50% • Chromium (Cr): 19.0 – 22.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for components exposed to oxidizing environments, fluctuating temperatures, and particulate flow where metal surface protection is critical. Uses • Protection of LTSH tubes in thermal power plant boilers • Coverage of heat exchanger tubes in waste heat recovery boilers • Shielding superheater coils from ash erosion and thermal stress • Ideal for utility boilers, steam generators, and flue gas-exposed piping • Applied in industrial boilers within cement, pulp & paper, and refining sectors Features • High-temperature resistance – Performs well in continuous service at elevated temperatures • Oxidation protection – Excellent resistance to flue gas scaling and surface degradation • Precise fitment – Custom curved for exact tube geometry for secure and uniform coverage • Enhanced durability – Reduces erosion, thermal fatigue, and mechanical damage • Versatile installation – Compatible with clamp-on, weld-on, or banding attachment methods • Custom dimensions – Available in multiple sizes and thicknesses per system requirement Applications • thermal power stations – Protects superheater coils and economizer tube bends from low-temperature gas wear • WHRBs – Shields curved tubes in exhaust heat recovery systems • chemical and petrochemical plants – Ensures protection for process steam lines exposed to flue gases • HRSGs – Increases the durability of LTSH coil tubes in combined-cycle systems • boiler and furnace systems – Ideal for superheater areas prone to wear from ash and soot deposition Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers excellent resistance to oxidation, scaling, and thermal damage in low-temperature superheater zones. Its heat-resistant composition and long service life make it a dependable choice for demanding boiler and heat exchanger applications across multiple industries. For custom requirements or technical inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, and mechanical wear in heat transfer systems. These shields are precisely engineered to fit the curvature of boiler tubes, especially in areas exposed to flue gas turbulence and ash impact. The half-round design allows for easy installation and ensures consistent protection throughout the tube's operating life. Cr23Ni13 Half Round Tube Shield for LTSH Tube The Cr23Ni13 Half Round Tube Shield is fabricated using a high-temperature-resistant chromium-nickel alloy containing approximately 23% chromium and 13% nickel. This composition provides excellent resistance to oxidation, thermal shock, and high-temperature corrosion. It is particularly suited for shielding LTSH (Low Temperature Superheater) tubes that operate in areas where flue gases carry abrasive particles, resulting in gradual material degradation over time. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr23Ni13 Half Round Tube Shields, delivering robust and thermally stable components for boiler protection applications in demanding industrial conditions. Chemical Composition of Cr23Ni13 – High Chromium-Nickel Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature zones in boilers and furnaces where oxidation, scaling, and ash corrosion pose operational challenges. Uses • Protects LTSH tubes in coal-fired and biomass-fired boilers • Shields heat exchanger tubes in waste heat recovery units • Provides erosion and oxidation resistance in process heaters and reformers • Installed in utility and industrial boilers to prevent wear from low-temperature flue gases • Suitable for use in marine, chemical, and refining industries where steam purity and thermal efficiency are critical Features • High-temperature resistance – Excellent durability under thermal cycling conditions • Corrosion protection – Chromium-rich alloy protects against oxidizing flue gases • Precision fabrication – Custom-fit designs ensure secure coverage of exposed tube surfaces • Enhanced tube longevity – Reduces surface wear, scaling, and thermal fatigue • Multiple installation methods – Supports weld-on, clamp-on, or banding attachment options • Customizable dimensions – Lengths, thicknesses, and radii can be tailored for system compatibility Applications • thermal power stations – Extends the life of LTSH coil sections in superheaters and economizers • WHRBs – Provides protective coverage for tubes exposed to particulate-laden exhaust gases • process industries – Ideal for exchangers and preheaters in refineries and petrochemical plants • HRSGs – Shields low-temperature superheater zones in combined-cycle power systems • cement and paper plants – Protects heat transfer surfaces from soot and particulate erosion Conclusion The Cr23Ni13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers a reliable and thermally robust solution for protecting superheater and heat exchanger tubes in abrasive and corrosive environments. Its high chromium-nickel composition ensures long-lasting performance in boiler systems where operational efficiency and tube integrity are critical. For orders, technical specifications, or consultation, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to guard boiler tubes, heat exchangers, and superheaters against flue gas erosion, fly ash abrasion, scaling, and thermal fatigue. These shields are widely used in power generation, chemical processing, and industrial steam systems to extend the operational life of tubing in high-wear zones. The half-round profile ensures easy fitment over straight or curved tubes, especially in areas exposed to turbulent gas flow and ash impact. 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube The 1Cr18Ni9Ti Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, equivalent to AISI 321. This material offers excellent resistance to intergranular corrosion and high-temperature oxidation while maintaining good mechanical strength. Its titanium content improves stability during welding and long-term thermal exposure, making it especially suitable for Low Temperature Superheater (LTSH) applications in boilers and heat recovery systems where steam tubes are subject to moderate heat, soot, and particulate attack. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti Half Round Tube Shields for LTSH systems, offering reliable and corrosion-resistant protection for thermal and energy-related applications. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C% • Iron (Fe): Balance Applications: Ideal for LTSH areas and convection zones in boilers exposed to flue gas condensation, moderate corrosion, and thermal fatigue from cyclic operations. Uses • Installed on LTSH tubes to protect from scaling, soot erosion, and ash deposition in thermal power plants • Shields superheater coils and heat exchanger bends in WHRBs and HRSGs • Suitable for industrial boilers in chemical plants where acidic or chloride-bearing gases are present • Used in biomass and coal-fired systems to reduce wear on tube surfaces from fly ash and gas turbulence • Effective in marine and coastal steam generation systems with moisture and chloride exposure Features • Excellent intergranular corrosion resistance – Stabilized with titanium for weld integrity and long-term stability • High-temperature oxidation resistance – Performs well under cyclic heat exposure and oxidizing gas conditions • Custom fit – Manufactured to match exact tube diameter, curvature, and installation length • Easy to mount – Suitable for welding, clamping, or banding installation methods • Enhanced tube life – Reduces maintenance frequency and increases system efficiency • Available in various thicknesses, lengths, and bend radii as per operational needs Applications • thermal power stations – Protects LTSH tubes from scaling and ash erosion in flue gas zones • waste heat recovery units – Shields return tube bends and convection coils from abrasive flow • steam generation systems – Enhances tube life in low-temperature superheater environments • refinery boilers – Resists acidic gas effects and thermal stress in process heating units • utility boilers – Used in coal-fired and biomass-fired systems requiring long-term tube protection Conclusion The 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-performance protection for boiler and superheater tubes in low-temperature, corrosive, and abrasive environments. With titanium stabilization and excellent thermal durability, it ensures extended service life and improved system reliability in a range of industrial and thermal applications. For customized designs, technical consultation, or pricing details, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-strength protective components used to shield boiler tubes, superheaters, and heat exchanger coils from ash impact, flue gas erosion, scaling, and corrosion. These shields are commonly used in thermal power plants, steam generating systems, and industrial boilers to protect tube surfaces and reduce wear in critical heat transfer zones. Their half-round profile is designed for easy installation and secure fitment over curved or straight tubes exposed to mechanical or thermal stress. SS 420 Half Round Tube Shield for LTSH Tube The SS 420 Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, which is known for its high hardness, good oxidation resistance, and moderate corrosion protection. This material provides excellent wear resistance in abrasive and dry flue gas environments. It is particularly suitable for Low Temperature Superheater (LTSH) applications, where tubes are exposed to fly ash erosion, gas turbulence, and mechanical abrasion at relatively lower temperatures. SS 420 is often used where durability and strength are more critical than corrosion resistance alone. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Tube Shields for LTSH applications, offering reliable protection where mechanical wear and gas erosion are of primary concern. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for dry ash, solid particulate flow, and mildly oxidizing environments in low-temperature superheater sections of boilers and industrial furnaces. Uses • Installed on LTSH tubes to protect from fly ash abrasion and soot erosion in power boilers • Shields return bends and tube banks in HRSGs and WHRBs exposed to turbulent flue gases • Used in biomass and coal-fired boilers to prevent mechanical wear and scaling on heat transfer tubes • Suitable for zones with high solid particle velocity and moderate corrosion risk • Effective in industrial and utility boilers that operate with abrasive fuels or in dry environments Features • High surface hardness – Excellent resistance to erosion, impact, and abrasion • Moderate oxidation resistance – Performs well in clean, oxidizing gas atmospheres • Precision fitment – Custom-shaped to match tube radius and curvature for secure shielding • Simple installation – Compatible with welding, clamping, or banding methods • Cost-efficient durability – Provides long service life in mechanical wear zones • Offered in varied lengths, thicknesses, and tube diameters based on application needs Applications • thermal power plants – Installed on LTSH tubes to minimize erosion and extend operational life • waste heat recovery units – Protects lower temperature coils from particulate-laden gas streams • coal-fired boilers – Shields convection sections exposed to ash and fly particles • steam generation systems – Guards heat transfer surfaces in dry, abrasive environments • biomass plants – Prevents wear from ash and unburned particulates in combustion zones Conclusion The SS 420 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers strong mechanical protection and erosion resistance for superheater and boiler tubes operating in low-temperature, abrasive environments. Designed for durability and precision fit, it enhances tube longevity and system performance in thermal applications where particulate damage is a concern. For product specifications, custom sizes, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components engineered to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, and ash impact. These shields are widely used in thermal power plants, industrial steam systems, and waste heat recovery units to prolong tube life and enhance operational reliability. Their semi-cylindrical shape allows for easy installation over exposed tube surfaces, especially in zones exposed to abrasive flue gases and thermal stress. SS 310S Half Round Tube Shield for LTSH Tube The SS 310S Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel grade 310S. With high chromium and nickel content, it offers excellent resistance to oxidation and scaling at elevated temperatures, while its reduced carbon level enhances weldability and reduces the risk of sensitization. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are exposed to flue gas streams, ash particles, and moderate thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 310S Half Round Tube Shields for LTSH tubes, offering high-performance shielding solutions for long-term service in boiler and heat recovery systems. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for areas with exposure to moderate temperatures, oxidizing gases, and ash deposition where high-temperature strength and corrosion resistance are critical. Uses • Protects LTSH tubes in power boilers from ash erosion, soot impact, and flue gas corrosion • Used in convection zones of HRSGs, economizers, and waste heat recovery units • Shields tube surfaces in steam generation systems exposed to gas turbulence and thermal cycling • Effective in industrial heating systems and chemical boilers facing scale formation and heat stress • Enhances durability of tubes in coal-fired and biomass-fired boilers with fly ash carryover Features • Excellent oxidation and scaling resistance – Performs in oxidizing environments and thermal zones • Superior weldability – Low carbon content minimizes risk of intergranular corrosion during welding • Tailored protection – Custom-fabricated to match tube diameter, bend radius, and system layout • Simple installation – Compatible with clamping, banding, or welding methods for quick setup • Extended tube life – Minimizes erosion and surface degradation, reducing maintenance downtime • Available in various lengths and thicknesses per system requirements Applications • thermal power plants – Installed on LTSH tube banks for long-term protection against erosion and corrosion • waste heat recovery boilers – Shields curved tubes in return flow zones with ash-laden flue gas • petrochemical units – Applied on steam coils and heat exchanger tubes operating under oxidizing gas exposure • utility boilers – Protects superheater tubes from scaling and particulate impact in low-temperature sections • industrial boiler systems – Enhances performance and service life of steam tubes in energy recovery zones Conclusion The SS 310S Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for superheater tubes operating in low-temperature, oxidizing, and abrasive flue gas environments. With enhanced weldability, high-temperature resistance, and custom-fit fabrication, this shield ensures dependable performance across a wide range of thermal and industrial applications. For technical assistance, tailored designs, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to provide surface protection for boiler tubes, superheaters, and heat exchangers from erosion, slag deposition, and thermal wear. These shields are commonly used in low temperature superheaters (LTSH), economizers, and coil sections in power plants and industrial heating systems. Their half-round profile allows quick installation on exposed tube surfaces, ensuring prolonged tube service life and reduced maintenance frequency. SS 304 Half Round Tube Shield for LTSH Tube The SS 304 Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which offers excellent corrosion resistance, good mechanical strength, and thermal stability. Designed specifically for LTSH (Low Temperature Super Heater) applications, it protects the exposed surfaces of tubes from low-temperature corrosion, soot erosion, and gas flow damage. The shield is precisely fabricated to match the outer diameter of LTSH tubes, enabling a tight and reliable fit. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 304 Half Round Tube Shields for LTSH applications, delivering durable and performance-oriented shielding solutions for thermal power and industrial process systems. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for low-temperature zones in superheaters, economizers, and other heat exchange systems exposed to gas flow, corrosion, and mild scaling. Uses • Installed on LTSH tubes in power plant boilers to protect from low-temperature flue gas corrosion • Shields exposed tube sections in economizers, air preheaters, and convection coil banks • Used in heat exchangers and process heaters operating in mildly corrosive and low thermal environments • Suitable for protection in industrial boilers and steam generation systems • Applied in thermal units where soot, slag, or flue gas turbulence causes mechanical surface wear Features • Excellent corrosion resistance – Resists oxidation, acidic gas exposure, and low-temperature fouling • Custom fit – Fabricated to match the exact diameter and length of LTSH tubes • Easy installation – Can be mounted using clamp-on, tack welding, or banding methods • Moderate thermal stability – Maintains structural integrity in low to moderate heat zones • Reduces maintenance – Prevents erosion and pitting, extending tube service life • Available in various lengths, wall thicknesses, and radii as per system specifications Applications • thermal power plants – Installed on LTSH tube banks to guard against flue gas corrosion and surface damage • industrial steam systems – Shields exposed superheater and reheater tube sections • waste heat recovery – Used in lower temperature zones of WHRBs and HRSGs • chemical plants – Provides surface protection in convection and heating coils exposed to process gases • boiler maintenance – Ideal for tube protection during retrofits, upgrades, or preventive maintenance Conclusion The SS 304 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable and corrosion-resistant protection for tubes in low-temperature superheater applications. With excellent mechanical and chemical performance, this shield ensures efficient operation and extended tube life in a wide range of thermal and industrial systems. For custom dimensions, technical support, or pricing, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect boiler coils, heat exchanger tubes, and superheaters from erosion, scaling, slag deposition, and high-temperature damage. These shields are used extensively in thermal power plants, waste heat recovery systems, and process industries to extend tube life, reduce maintenance costs, and maintain thermal efficiency. Their semi-cylindrical design allows for easy and secure installation over straight or curved tube surfaces. 1Cr13 U Type Inner Half Round Tube Shield The 1Cr13 U Type Inner Half Round Tube Shield is fabricated from martensitic stainless steel 1Cr13, offering good mechanical strength, moderate corrosion resistance, and excellent wear resistance. This grade performs well in thermal systems subject to moderate chemical exposure and mechanical erosion. The inner U-type configuration is engineered to shield the inner arc of U-bend tubes, where turbulent flow, thermal cycling, and slag buildup are most intense and damaging. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, protecting against erosion, slag impact, and thermal degradation in high-flow areas. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr13 U Type Inner Half Round Tube Shields, offering durable and cost-effective solutions for general-purpose heat protection in industrial systems. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and abrasive environments with thermal exposure, where strength and erosion resistance are required. Uses • Installed on the inner arc of U-bend tubes in boilers and reheaters to resist erosion from flue gas flow • Shields inner bends in WHRBs and HRSGs subjected to scale buildup and thermal fatigue • Applied in curved tube sections of heat exchangers and evaporators operating under fluctuating temperatures • Used in process industries for protection against moderate corrosion and mechanical wear • Ideal for thermal units in power, petrochemical, and refining applications Features • Good wear and erosion resistance – Suitable for high-velocity gas flow zones • Inner arc protection – Shields critical U-bend areas where slag, turbulence, and thermal load are most severe • Moderate corrosion resistance – Performs well in mildly aggressive gas environments • Tailored fit – Custom-fabricated to match tube size and bend radius for precise protection • Easy installation – Compatible with clamp-on, weld-on, or banding methods • Cost-effective – An economical solution for routine protection of thermal system tube bends Applications • power generation – Inner U-bend protection in superheaters and economizers facing gas flow and scaling • waste heat recovery – Used in WHRBs to protect return bends from erosion and thermal damage • petrochemical processing – Applied in internal bends of steam reformers and exchangers • chemical industry – Suitable for use in reactors and thermal units operating under moderate heat and chemical exposure • industrial furnaces – Protects tube bends from slag deposits and temperature fluctuations Conclusion The 1Cr13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for U-bend tubes exposed to moderate thermal and erosive conditions. With its martensitic strength, wear resistance, and affordable performance, it is well-suited for a wide range of thermal and industrial process applications. For custom sizes, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components designed to guard heat exchanger coils, boiler tubes, and superheater assemblies from erosion, high-temperature scaling, slag accumulation, and corrosion. These shields are vital in high-performance industrial systems, including power plants, refineries, and chemical process units. Their half-round shape allows easy installation on both straight and curved tubes, improving system longevity while minimizing downtime and maintenance frequency. 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield is manufactured using a high-temperature austenitic stainless steel alloy with enhanced chromium, nickel, and silicon content. This alloy delivers excellent oxidation resistance, thermal fatigue resistance, and structural stability at elevated temperatures. The inner U-type configuration is tailored to cover the inner arc of U-bend tubes, offering critical protection where high-velocity gas, turbulence, and slag deposits can rapidly wear or degrade tube surfaces. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from scaling, erosion, and heat-related damage in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Inner Half Round Tube Shields, delivering high-performance shielding solutions for demanding high-temperature environments. Chemical Composition of 1Cr20Ni14Si2 – High Chromium-Nickel-Silicon Heat-Resistant Alloy • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous high-temperature operations involving oxidizing or sulfur-containing gases. Well-suited for applications requiring excellent heat resistance and minimal thermal deformation. Uses • Shields inner arcs of U-bend tubes in boilers and superheaters operating at elevated temperatures • Installed in WHRBs and HRSGs to prevent scaling, slag, and erosion in internal tube bends • Used in curved coils in reformers and process heaters exposed to hot gas and thermal cycling • Protects tube bends in chemical reactors, incinerators, and industrial furnaces from oxidation and surface degradation • Effective in systems where stability at high temperatures and resistance to carburizing and sulfidizing environments are essential Features • Excellent high-temperature performance – Withstands long-term exposure to temperatures exceeding 1000°C • Inner arc coverage – Precisely shields erosion-prone internal tube bends in critical heat transfer zones • Superior oxidation and scaling resistance – Resists corrosion in aggressive combustion gas atmospheres • Custom-fit design – Fabricated according to specified tube radii and diameters for optimal coverage and secure fit • Quick and secure installation – Compatible with clamping, banding, or tack welding methods • Long operational life – Reduces the frequency of tube failures, improving reliability and plant efficiency Applications • power plants – Installed on U-bend tubes in superheaters and reheaters facing continuous high-temperature service • petrochemical plants – Protects inner arcs of tubes in reformers and gas processing heat exchangers • waste heat recovery – Shields return bends in WHRBs and HRSGs exposed to hot flue gas and slag • thermal processing – Applied in furnaces and incinerators where hot combustion gases affect internal tube surfaces • chemical industry – Guards against oxidizing and corrosive gas damage in curved tube sections of reactors Conclusion The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust and heat-resistant solution for protecting U-bend tubes in high-temperature and chemically aggressive conditions. Its high alloy composition, excellent thermal resistance, and customized fitment make it ideal for enhancing tube performance and reliability in critical thermal systems. For technical specifications, customized fabrication, or quotations, please contact Ladhani Metal Corporation.